Trying to make au0828 to suspend can do very bad things, as
the polling Kthread is not handled. We should disable it
during suspend, only re-enabling it at resume.
Still, analog and digital TV won't work, as we don't reinit
the settings at resume, but at least it won't hang.
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Define au0828_rc_*() stubs to avoid compile errors when
VIDEO_AU0828_RC is disabled and avoid the need to enclose
au0828_rc_*() in ifdef CONFIG_VIDEO_AU0828_RC in .c files.
Signed-off-by: Shuah Khan <shuah.kh@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
It doesn't make sense to handle an IR code given before
suspending after the device resume. So, turn off IR
int while suspending.
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
As the RC kthread can re-enable IR int, we should first
cancel the kthread and then disable IR int.
While here, remove a temporary debug printk.
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
When the DVB code sets the frontend, it disables the IR
INT, probably due to some hardware bug, as there's no code
there at au8522 frontend that writes on register 0xe0.
Fixing it at au8522 code is hard, as it doesn't know if the
IR is enabled or disabled, and just restoring the value of
register 0xe0 could cause other nasty effects. So, better
to add a hack at au0828-input polling interval to enable int,
if disabled.
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
The IR code increases the power consumption of the device.
Allow to disable it via modprobe parameter.
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
This sleep was doing some debouncing on the original driver.
This is not needed on Linux, because the RC core and the input
layer already takes care of it.
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
To be future-proof and for better readability the time comparisons are modified
to use time_before_jiffies() instead of plain, error-prone math.
Signed-off-by: Manuel Schölling <manuel.schoelling@gmx.de>
[djbw: use time_before_jiffies() to make argument order more clear]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The driver should not touch CS lines if SPI_NO_CS flag is set.
This patch fixes it as this functionality was broken accidentally
by
commit a88e34ea21 ("spi: davinci: add support to configure gpio cs through dt").
Fixes: a88e34ea21 ("spi: davinci: add support to configure gpio cs through dt")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
the partial xor result must be kept until the next
tx is generated.
Cc: <stable@vger.kernel.org>
Signed-off-by: Xuelin Shi <xuelin.shi@freescale.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
In case of error, goto ssetup_exit can be hit and we could end up using
uninitialized value of resp_buftype
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Ashish Sangwan <a.sangwan@samsung.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Unlikely but possible. When password is supplied multiple times, we have
to free the previous allocation.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Ashish Sangwan <a.sangwan@samsung.com>
Signed-off-by: Steve French <smfrench@gmail.com>
When kzalloc fails, we will end up doing NULL pointer derefrence
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Ashish Sangwan <a.sangwan@samsung.com>
Signed-off-by: Steve French <smfrench@gmail.com>
* General defconfig update to match upstream changes
* Enable IPQ806x & APQ8084 clk support
* Enable pinctrl on MSM8960
* Enable CPU_IDLE to get basic wfi support
* Enable SPI NOR and MTD M25P80 support (used on AP148 board)
* Enable SATA PHY support on IPQ806x and APQ8064
* Enable Fixed regulator and ARM MMCI support (mmc support on APQ8064)
Signed-off-by: Kumar Gala <galak@codeaurora.org>
Tracepoint for dynamic PLE window, fired on every potential change.
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Window is increased on every PLE exit and decreased on every sched_in.
The idea is that we don't want to PLE exit if there is no preemption
going on.
We do this with sched_in() because it does not hold rq lock.
There are two new kernel parameters for changing the window:
ple_window_grow and ple_window_shrink
ple_window_grow affects the window on PLE exit and ple_window_shrink
does it on sched_in; depending on their value, the window is modifier
like this: (ple_window is kvm_intel's global)
ple_window_shrink/ |
ple_window_grow | PLE exit | sched_in
-------------------+--------------------+---------------------
< 1 | = ple_window | = ple_window
< ple_window | *= ple_window_grow | /= ple_window_shrink
otherwise | += ple_window_grow | -= ple_window_shrink
A third new parameter, ple_window_max, controls the maximal ple_window;
it is internally rounded down to a closest multiple of ple_window_grow.
VCPU's PLE window is never allowed below ple_window.
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Change PLE window into per-VCPU variable, seeded from module parameter,
to allow greater flexibility.
Brings in a small overhead on every vmentry.
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
sched_in preempt notifier is available for x86, allow its use in
specific virtualization technlogies as well.
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce preempt notifiers for architecture specific code.
Advantage over creating a new notifier in every arch is slightly simpler
code and guaranteed call order with respect to kvm_sched_in.
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add basic IPQ8064 SoC include device tree and support for basic booting on
the AP148 Reference board with support for UART, I2C, and SPI.
Signed-off-by: Kumar Gala <galak@codeaurora.org>
Add the necessary DT node to probe the serial driver on
APQ8084 platforms.
Signed-off-by: Georgi Djakov <gdjakov@mm-sol.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
This patch adds the necessary node to probe the global clock
controller on APQ8084 platforms.
Signed-off-by: Georgi Djakov <gdjakov@mm-sol.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
It needs to check s_dirty under cp_mutex, since s_dirty is reset under that
mutex.
And previous condition was not correct, since we can omit doing checkpoint
when checkpoint was done followed by all the node pages were written back.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch gives another chance to try mount process when we encounter an error.
This makes an effect on the roll-forward recovery failures as well.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The generic_shutdown_super calls sync_filesystem, evict_inode, and then
f2fs_put_super. In f2fs_evict_inode, we remain some dirty inode information
so we should release them at f2fs_put_super.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
There are a few very theoretical off-by-one bugs in report descriptor size
checking when performing a pre-parsing fixup. Fix those.
Cc: stable@vger.kernel.org
Reported-by: Ben Hawkes <hawkes@google.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
device_index is a char type and the size of paired_dj_deivces is 7
elements, therefore proper bounds checking has to be applied to
device_index before it is used.
We are currently performing the bounds checking in
logi_dj_recv_add_djhid_device(), which is too late, as malicious device
could send REPORT_TYPE_NOTIF_DEVICE_UNPAIRED early enough and trigger the
problem in one of the report forwarding functions called from
logi_dj_raw_event().
Fix this by performing the check at the earliest possible ocasion in
logi_dj_raw_event().
Cc: stable@vger.kernel.org
Reported-by: Ben Hawkes <hawkes@google.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The check on report size for REPORT_TYPE_LEDS in logi_dj_ll_raw_request()
is wrong; the current check doesn't make any sense -- the report allocated
by HID core in hid_hw_raw_request() can be much larger than
DJREPORT_SHORT_LENGTH, and currently logi_dj_ll_raw_request() doesn't
handle this properly at all.
Fix the check by actually trimming down the report size properly if it is
too large.
Cc: stable@vger.kernel.org
Reported-by: Ben Hawkes <hawkes@google.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Check for valid parameters in check rate. Else, we end up getting
errors.
This occurs as part of the inital clock tree update of child clock
nodes where new_rate could be 0 for non functional clocks.
Fixes: 9ac33b0ce8 (" CLK: TI: Driver for DRA7 ATL (Audio Tracking Logic)")
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Check for valid parameters in check rate. Else, we end up getting errors
like:
[ 0.000000] Division by zero in kernel.
[ 0.000000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.17.0-rc1 #1
[ 0.000000] [<c0015160>] (unwind_backtrace) from [<c0011978>] (show_stack+0x10/0x14)
[ 0.000000] [<c0011978>] (show_stack) from [<c055f5f4>] (dump_stack+0x78/0x94)
[ 0.000000] [<c055f5f4>] (dump_stack) from [<c02e17cc>] (Ldiv0+0x8/0x10)
[ 0.000000] [<c02e17cc>] (Ldiv0) from [<c047d228>] (ti_clk_divider_set_rate+0x14/0x14c)
[ 0.000000] [<c047d228>] (ti_clk_divider_set_rate) from [<c047a938>] (clk_change_rate+0x138/0x180)
[ 0.000000] [<c047a938>] (clk_change_rate) from [<c047a908>] (clk_change_rate+0x108/0x180)
This occurs as part of the inital clock tree update of child clock nodes
where new_rate could be 0 for non functional clocks.
Fixes: b4761198bf ("CLK: ti: add support for ti divider-clock")
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
As the driver is in mainline we can remove the version numbers.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
If uvc->control_buf is successfuly allocated but uvc->control_req
is not, uvc->control_buf is not freed in the error recovery path.
With this patch applied uvc->control_buf is freed unconditionally;
if it happens to be NULL kfree on it is safe anyway.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Activate the videobuf2 DMABUF support. As vb2-vmalloc supports the
importer role only, exporting buffers isn't supported yet. When the
exporter role will be implemented in vb2-vmalloc the UVC gadget driver
will automatically gain support for it.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
The disconnect of the USB Device is a common pattern for
an UVC Camera. In many cases this will give us an meaningless
information for all buffers that couldn't be enqueued.
That patch changes this to KERN_DEBUG.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Set 'ti,set-rate-parent' property for the dpll4_m5x2_ck clock, which
is used for the ISP functional clock. This fixes the OMAP3 ISP driver's
clock rate configuration on OMAP34xx, which needs the rate to be
propagated properly to the divider node (dpll4_m5_ck).
Signed-off-by: Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Tero Kristo <t-kristo@ti.com>
Cc: <linux-media@vger.kernel.org>
Cc: <linux-omap@vger.kernel.org>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
We should only be flushing on close if the file was flagged as needing
it during truncate. I broke this with my ordered data vs transaction
commit deadlock fix.
Thanks to Miao Xie for catching this.
Signed-off-by: Chris Mason <clm@fb.com>
Reported-by: Miao Xie <miaox@cn.fujitsu.com>
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
The crash is
------------[ cut here ]------------
kernel BUG at fs/btrfs/extent_io.c:2124!
[...]
Workqueue: btrfs-endio normal_work_helper [btrfs]
RIP: 0010:[<ffffffffa02d6055>] [<ffffffffa02d6055>] end_bio_extent_readpage+0xb45/0xcd0 [btrfs]
This is in fact a regression.
It is because we forgot to increase @offset properly in reading corrupted block,
so that the @offset remains, and this leads to checksum errors while reading
left blocks queued up in the same bio, and then ends up with hiting the above
BUG_ON.
Reported-by: Chris Murphy <lists@colorremedies.com>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
Coverity pointed this out; in the newly added
qgroup_subtree_accounting(), if btrfs_find_all_roots()
returns an error, we leak at least the parents pointer,
and possibly the roots pointer, depending on what failure
occurs.
If btrfs_find_all_roots() returns an error, we need to
free up all allocations before we return. "roots" is
initialized to NULL, so it should be safe to free
it unconditionally (ulist_free() handles that case).
Cc: Mark Fasheh <mfasheh@suse.de>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Mark Fasheh <mfasheh@suse.de>
Signed-off-by: Chris Mason <clm@fb.com>
When current btrfs finds that a new extent map is going to be insereted
but failed with -EEXIST, it will try again to insert the extent map
but with the length of sectorsize.
This is OK if we don't enable 'no-holes' feature since all extent space
is continuous, we will not go into the not found->insert routine.
But if we enable 'no-holes' feature, it will make things out of control.
e.g. in 4K sectorsize, we pass the following args to btrfs_get_extent():
btrfs_get_extent() args: start: 27874 len 4100
28672 27874 28672 27874+4100 32768
|-----------------------|
|---------hole--------------------|---------data----------|
1) not found and insert
Since no extent map containing the range, btrfs_get_extent() will go
into the not_found and insert routine, which will try to insert the
extent map (27874, 27847 + 4100).
2) first overlap
But it overlaps with (28672, 32768) extent, so -EEXIST will be returned
by add_extent_mapping().
3) retry but still overlap
After catching the -EEXIST, then btrfs_get_extent() will try insert it
again but with 4K length, which still overlaps, so -EEXIST will be
returned.
This makes the following patch fail to punch hole.
d77815461f btrfs: Avoid trucating page or punching hole in a already existed hole.
This patch will use the right length, which is the (exsisting->start -
em->start) to insert, making the above patch works in 'no-holes' mode.
Also, some small code style problems in above patch is fixed too.
Reported-by: Filipe David Manana <fdmanana@gmail.com>
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: Filipe David Manana <fdmanana@suse.com>
Tested-by: Filipe David Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
When cloning a file that consists of an inline extent, we were creating
an extent map that represents a non-existing trailing hole starting at a
file offset that isn't a multiple of the sector size. This happened because
when processing an inline extent we weren't aligning the extent's length to
the sector size, and therefore incorrectly treating the range
[inline_extent_length; sector_size[ as a hole.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
If an inode has a very large number of extent maps, we can spend
a lot of time freeing them, which triggers a soft lockup warning.
Therefore reschedule if we need to when freeing the extent maps
while evicting the inode.
I could trigger this all the time by running xfstests/generic/299 on
a file system with the no-holes feature enabled. That test creates
an inode with 11386677 extent maps.
$ mkfs.btrfs -f -O no-holes $TEST_DEV
$ MKFS_OPTIONS="-O no-holes" ./check generic/299
generic/299 382s ...
Message from syslogd@debian-vm3 at Aug 7 10:44:29 ...
kernel:[85304.208017] BUG: soft lockup - CPU#0 stuck for 22s! [umount:25330]
384s
Ran: generic/299
Passed all 1 tests
$ dmesg
(...)
[86304.300017] BUG: soft lockup - CPU#0 stuck for 23s! [umount:25330]
(...)
[86304.300036] Call Trace:
[86304.300036] [<ffffffff81698ba9>] __slab_free+0x54/0x295
[86304.300036] [<ffffffffa02ee9cc>] ? free_extent_map+0x5c/0xb0 [btrfs]
[86304.300036] [<ffffffff811a6cd2>] kmem_cache_free+0x282/0x2a0
[86304.300036] [<ffffffffa02ee9cc>] free_extent_map+0x5c/0xb0 [btrfs]
[86304.300036] [<ffffffffa02e3775>] btrfs_evict_inode+0xd5/0x660 [btrfs]
[86304.300036] [<ffffffff811e7c8d>] ? __inode_wait_for_writeback+0x6d/0xc0
[86304.300036] [<ffffffff816a389b>] ? _raw_spin_unlock+0x2b/0x40
[86304.300036] [<ffffffff811d8cbb>] evict+0xab/0x180
[86304.300036] [<ffffffff811d8dce>] dispose_list+0x3e/0x60
[86304.300036] [<ffffffff811d9b04>] evict_inodes+0xf4/0x110
[86304.300036] [<ffffffff811bd953>] generic_shutdown_super+0x53/0x110
[86304.300036] [<ffffffff811bdaa6>] kill_anon_super+0x16/0x30
[86304.300036] [<ffffffffa02a78ba>] btrfs_kill_super+0x1a/0xa0 [btrfs]
[86304.300036] [<ffffffff811bd3a9>] deactivate_locked_super+0x59/0x80
[86304.300036] [<ffffffff811be44e>] deactivate_super+0x4e/0x70
[86304.300036] [<ffffffff811dec14>] mntput_no_expire+0x174/0x1f0
[86304.300036] [<ffffffff811deab7>] ? mntput_no_expire+0x17/0x1f0
[86304.300036] [<ffffffff811e0517>] SyS_umount+0x97/0x100
(...)
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com>
Tested-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
The file hole detection logic during a file fsync wasn't correct,
because it didn't look back (in a previous leaf) for the last file
extent item that can be in a leaf to the left of our leaf and that
has a generation lower than the current transaction id. This made it
assume that a hole exists when it really doesn't exist in the file.
Such false positive hole detection happens in the following scenario:
* We have a file that has many file extent items, covering 3 or more
btree leafs (the first leaf must contain non file extent items too).
* Two ranges of the file are modified, with their extent items being
located at 2 different leafs and those leafs aren't consecutive.
* When processing the second modified leaf, we weren't checking if
some file extent item exists that is located in some leaf that is
between our 2 modified leafs, and therefore assumed the range defined
between the last file extent item in the first leaf and the first file
extent item in the second leaf matched a hole.
Fortunately this didn't result in overriding the log with wrong data,
instead it made the last loop in copy_items() attempt to insert a
duplicated key (for a hole file extent item), which makes the file
fsync code return with -EEXIST to file.c:btrfs_sync_file() which in
turn ends up doing a full transaction commit, which is much more
expensive then writing only to the log tree and wait for it to be
durably persisted (as well as the file's modified extents/pages).
Therefore fix the hole detection logic, so that we don't pay the
cost of doing full transaction commits.
I could trigger this issue with the following test for xfstests (which
never fails, either without or with this patch). The last fsync call
results in a full transaction commit, due to the -EEXIST error mentioned
above. I could also observe this behaviour happening frequently when
running xfstests/generic/075 in a loop.
Test:
_cleanup()
{
_cleanup_flakey
rm -fr $tmp
}
# get standard environment, filters and checks
. ./common/rc
. ./common/filter
. ./common/dmflakey
# real QA test starts here
_supported_fs btrfs
_supported_os Linux
_require_scratch
_require_dm_flakey
_need_to_be_root
rm -f $seqres.full
# Create a file with many file extent items, each representing a 4Kb extent.
# These items span 3 btree leaves, of 16Kb each (default mkfs.btrfs leaf size
# as of btrfs-progs 3.12).
_scratch_mkfs -l 16384 >/dev/null 2>&1
_init_flakey
SAVE_MOUNT_OPTIONS="$MOUNT_OPTIONS"
MOUNT_OPTIONS="$MOUNT_OPTIONS -o commit=999"
_mount_flakey
# First fsync, inode has BTRFS_INODE_NEEDS_FULL_SYNC flag set.
$XFS_IO_PROG -f -c "pwrite -S 0x01 -b 4096 0 4096" -c "fsync" \
$SCRATCH_MNT/foo | _filter_xfs_io
# For any of the following fsync calls, inode doesn't have the flag
# BTRFS_INODE_NEEDS_FULL_SYNC set.
for ((i = 1; i <= 500; i++)); do
OFFSET=$((4096 * i))
LEN=4096
$XFS_IO_PROG -c "pwrite -S 0x01 $OFFSET $LEN" -c "fsync" \
$SCRATCH_MNT/foo | _filter_xfs_io
done
# Commit transaction and bump next transaction's id (to 7).
sync
# Truncate will set the BTRFS_INODE_NEEDS_FULL_SYNC flag in the btrfs's
# inode runtime flags.
$XFS_IO_PROG -c "truncate 2048000" $SCRATCH_MNT/foo
# Commit transaction and bump next transaction's id (to 8).
sync
# Touch 1 extent item from the first leaf and 1 from the last leaf. The leaf
# in the middle, containing only file extent items, isn't touched. So the
# next fsync, when calling btrfs_search_forward(), won't visit that middle
# leaf. First and 3rd leaf have now a generation with value 8, while the
# middle leaf remains with a generation with value 6.
$XFS_IO_PROG \
-c "pwrite -S 0xee -b 4096 0 4096" \
-c "pwrite -S 0xff -b 4096 2043904 4096" \
-c "fsync" \
$SCRATCH_MNT/foo | _filter_xfs_io
_load_flakey_table $FLAKEY_DROP_WRITES
md5sum $SCRATCH_MNT/foo | _filter_scratch
_unmount_flakey
_load_flakey_table $FLAKEY_ALLOW_WRITES
# During mount, we'll replay the log created by the fsync above, and the file's
# md5 digest should be the same we got before the unmount.
_mount_flakey
md5sum $SCRATCH_MNT/foo | _filter_scratch
_unmount_flakey
MOUNT_OPTIONS="$SAVE_MOUNT_OPTIONS"
status=0
exit
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
If we open a file with O_TMPFILE, don't do any further operation on
it (so that the inode item isn't updated) and then force a transaction
commit, we get a persisted inode item with a link count of 1, and not 0
as it should be.
Steps to reproduce it (requires a modern xfs_io with -T support):
$ mkfs.btrfs -f /dev/sdd
$ mount -o /dev/sdd /mnt
$ xfs_io -T /mnt &
$ sync
Then btrfs-debug-tree shows the inode item with a link count of 1:
$ btrfs-debug-tree /dev/sdd
(...)
fs tree key (FS_TREE ROOT_ITEM 0)
leaf 29556736 items 4 free space 15851 generation 6 owner 5
fs uuid f164d01b-1b92-481d-a4e4-435fb0f843d0
chunk uuid 0e3d0e56-bcca-4a1c-aa5f-cec2c6f4f7a6
item 0 key (256 INODE_ITEM 0) itemoff 16123 itemsize 160
inode generation 3 transid 6 size 0 block group 0 mode 40755 links 1
item 1 key (256 INODE_REF 256) itemoff 16111 itemsize 12
inode ref index 0 namelen 2 name: ..
item 2 key (257 INODE_ITEM 0) itemoff 15951 itemsize 160
inode generation 6 transid 6 size 0 block group 0 mode 100600 links 1
item 3 key (ORPHAN ORPHAN_ITEM 257) itemoff 15951 itemsize 0
orphan item
checksum tree key (CSUM_TREE ROOT_ITEM 0)
(...)
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
This is a better solution for the problem addressed in the following
commit:
Btrfs: update commit root on snapshot creation after orphan cleanup
(3821f34888)
The previous solution wasn't the best because of 2 reasons:
1) It added another full transaction commit, which is more expensive
than just swapping the commit root with the root;
2) If a reboot happened after the first transaction commit (the one
that creates the snapshot) and before the second transaction commit,
then we would end up with the same problem if a send using that
snapshot was requested before the first transaction commit after
the reboot.
This change addresses those 2 issues. The second issue is addressed by
switching the commit root in the dentry lookup VFS callback, which is
also called by the snapshot/subvol creation ioctl and performs orphan
cleanup if needed. Like the vfs, the ioctl locks the parent inode too,
preventing race issues between a dentry lookup and snapshot creation.
Cc: Alex Lyakas <alex.btrfs@zadarastorage.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>