In one pinctrl node, a 'bias-disable' property is erroneously assigned a
value.
Fixes: ARM: zynq: DT: Add pinctrl information
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Driver forgot to unregister power supply if request_threaded_irq()
failed in probe(). In such case the memory associated with power supply
leaked.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Fixes: a830d28b48 ("power_supply: Enable battery-charger for 88pm860x")
Cc: <stable@vger.kernel.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
For a PV guest, use the find_special_page op to find the right page.
To handle VMAs being split, remember the start of the original VMA so
the correct index in the pages array can be calculated.
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
In an x86 PV guest, get_user_pages_fast() on a userspace address range
containing foreign mappings does not work correctly because the M2P
lookup of the MFN from a userspace PTE may return the wrong page.
Force get_user_pages_fast() to fail on such addresses by marking the PTEs
as special.
If Xen has XENFEAT_gnttab_map_avail_bits (available since at least
4.0), we can do so efficiently in the grant map hypercall. Otherwise,
it needs to be done afterwards. This is both inefficient and racy
(the mapping is visible to the task before we fixup the PTEs), but
will be fine for well-behaved applications that do not use the mapping
until after the mmap() system call returns.
Guests with XENFEAT_auto_translated_physmap (ARM and x86 HVM or PVH)
do not need this since get_user_pages() has always worked correctly
for them.
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Use gnttab_unmap_refs_async() to wait until the mapped pages are no
longer in use before unmapping them.
This allows blkback to use network storage which may retain refs to
pages in queued skbs after the block I/O has completed.
Signed-off-by: Jennifer Herbert <jennifer.herbert@citrix.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Jens Axboe <axboe@kernel.de>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Use gnttab_unmap_refs_async() to wait until the mapped pages are no
longer in use before unmapping them.
This allows userspace programs to safely use Direct I/O and AIO to a
network filesystem which may retain refs to pages in queued skbs after
the filesystem I/O has completed.
Signed-off-by: Jennifer Herbert <jennifer.herbert@citrix.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Unmapping may require sleeping and we unmap while holding priv->lock, so
convert it to a mutex.
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Introduce gnttab_unmap_refs_async() that can be used to safely unmap
pages that may be in use (ref count > 1). If the pages are in use the
unmap is deferred and retried later. This polling is not very clever
but it should be good enough if the cases where the delay is necessary
are rare.
The initial delay is 5 ms and is increased linearly on each subsequent
retry (to reduce load if the page is in use for a long time).
This is needed to allow block backends using grant mapping to safely
use network storage (block or filesystem based such as iSCSI or NFS).
The network storage driver may complete a block request whilst there
is a queued network packet retry (because the ack from the remote end
races with deciding to queue the retry). The pages for the retried
packet would be grant unmapped and the network driver (or hardware)
would access the unmapped page.
Signed-off-by: Jennifer Herbert <jennifer.herbert@citrix.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Use the foreign page flag in netback to get the domid and grant ref
needed for the grant copy. This signficiantly simplifies the netback
code and makes netback work with foreign pages from other backends
(e.g., blkback).
This allows blkback to use iSCSI disks provided by domUs running on
the same host.
Signed-off-by: Jennifer Herbert <jennifer.herbert@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Use the "foreign" page flag to mark pages that have a grant map. Use
page->private to store information of the grant (the granting domain
and the grant reference).
Signed-off-by: Jennifer Herbert <jennifer.herbert@citrix.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Add gnttab_alloc_pages() and gnttab_free_pages() to allocate/free pages
suitable to for granted maps.
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Ballooned pages are always used for grant maps which means the
original frame does not need to be saved in page->index nor restored
after the grant unmap.
This allows the workaround in netback for the conflicting use of the
(unionized) page->index and page->pfmemalloc to be removed.
Signed-off-by: Jennifer Herbert <jennifer.herbert@citrix.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
The scratch frame mappings for ballooned pages and the m2p override
are broken. Remove them in preparation for replacing them with
simpler mechanisms that works.
The scratch pages did not ensure that the page was not in use. In
particular, the foreign page could still be in use by hardware. If
the guest reused the frame the hardware could read or write that
frame.
The m2p override did not handle the same frame being granted by two
different grant references. Trying an M2P override lookup in this
case is impossible.
With the m2p override removed, the grant map/unmap for the kernel
mappings (for x86 PV) can be easily batched in
set_foreign_p2m_mapping() and clear_foreign_p2m_mapping().
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
When unmapping grants, instead of converting the kernel map ops to
unmap ops on the fly, pre-populate the set of unmap ops.
This allows the grant unmap for the kernel mappings to be trivially
batched in the future.
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
The foreign page flag will be used by Xen guests to mark pages that
have grant mappings of frames from other (foreign) guests.
The foreign flag is an alias for the existing (Xen-specific) pinned
flag. This is safe because pinned is only used on pages used for page
tables and these cannot also be foreign.
Signed-off-by: Jennifer Herbert <jennifer.herbert@citrix.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
The optional find_special_page VMA operation is used to lookup the
pages backing a VMA. This is useful in cases where the normal
mechanisms for finding the page don't work. This is only called if
the PTE is special.
One use case is a Xen PV guest mapping foreign pages into userspace.
In a Xen PV guest, the PTEs contain MFNs so get_user_pages() (for
example) must do an MFN to PFN (M2P) lookup before it can get the
page. For foreign pages (those owned by another guest) the M2P lookup
returns the PFN as seen by the foreign guest (which would be
completely the wrong page for the local guest).
This cannot be fixed up improving the M2P lookup since one MFN may be
mapped onto two or more pages so getting the right page is impossible
given just the MFN.
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Add support for the following new PEAK-System technik CANFD USB adapters:
PCAN-USB FD single CANFD channel USB adapter
PCAN-USB Pro FD dual CANFD channels USB adapter
Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Acked-by: Andri Yngvason <andri.yngvason@marel.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Add a common function that pushes the skb in the network queue with adding
timestamps information, converted from time values read from the
PEAK USB adapters.
Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Add support for the following new PEAK-System technik CANFD USB adapters:
PCAN-USB FD single CANFD channel USB adapter
PCAN-USB Pro FD dual CANFD channels USB adapter
The communication protocol has been developed using some mechanisms that
did exist in the PCAN-USB Pro, thus, this patch also changes some
previously static functions and data into global ones.
Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Upgrade PEAK-System USB adapters core to the new data structures (names) and
callbacks added for the support of the CANFD extension. This specific patch
includes changes that deal with the new struct canfd_frame.
Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Upgrade PEAK-System USB adapters core to the new data structures (names) and
callbacks added for the support of the CANFD extension. This specific patch
does the mandatory changes to support new data bittiming specs.
Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Add the definition of a new callback that enable any PEAK-System CAN USB
adapter to grant read access to its Bus Error Counters value. This ability is
not supported by all the PEAK-System adapters, thus, for those, the callback
pointer will be initiaized to NULL, which is correct regarding the linux-can
device driver specs.
Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Export the ctrlmode_supported value from the core file to each adapter specific
file. This has been mandatory for supporting the new CANFD extension.
Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
A "struct peak_usb_adapter" describes a certain USB adapter, as this doesn't
change during runtime, this patch marks all USB adapter definitions as const.
Acked-by: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This patch converts the list "static struct peak_usb_adapter
*peak_usb_adapters_list[]" to be used with ARRAY_SIZE not with a NULL
termination, as the size is known during compile time.
Acked-by: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This effectively reverts the last hunk of 392a9dad7e ("rbd: detect
when clone image is flattened").
The problem with parent_overlap != 0 condition is that it's possible
and completely valid to have an image with parent_overlap == 0 whose
parent state needs to be cleaned up on unmap. The next commit, which
drops the "clone image now standalone" logic, opens up another window
of opportunity to hit this, but even without it
# cat parent-ref.sh
#!/bin/bash
rbd create --image-format 2 --size 1 foo
rbd snap create foo@snap
rbd snap protect foo@snap
rbd clone foo@snap bar
rbd resize --allow-shrink --size 0 bar
rbd resize --size 1 bar
DEV=$(rbd map bar)
rbd unmap $DEV
leaves rbd_device/rbd_spec/etc and rbd_client along with ceph_client
hanging around.
My thinking behind calling rbd_dev_parent_put() unconditionally is that
there shouldn't be any requests in flight at that point in time as we
are deep into unmap sequence. Hence, even if rbd_dev_unparent() caused
by flatten is delayed by in-flight requests, it will have finished by
the time we reach rbd_dev_unprobe() caused by unmap, thus turning
unconditional rbd_dev_parent_put() into a no-op.
Fixes: http://tracker.ceph.com/issues/10352
Cc: stable@vger.kernel.org # 3.11+
Signed-off-by: Ilya Dryomov <idryomov@redhat.com>
Reviewed-by: Josh Durgin <jdurgin@redhat.com>
Reviewed-by: Alex Elder <elder@linaro.org>
The comment for rbd_dev_parent_get() said
* We must get the reference before checking for the overlap to
* coordinate properly with zeroing the parent overlap in
* rbd_dev_v2_parent_info() when an image gets flattened. We
* drop it again if there is no overlap.
but the "drop it again if there is no overlap" part was missing from
the implementation. This lead to absurd parent_ref values for images
with parent_overlap == 0, as parent_ref was incremented for each
img_request and virtually never decremented.
Fix this by leveraging the fact that refresh path calls
rbd_dev_v2_parent_info() under header_rwsem and use it for read in
rbd_dev_parent_get(), instead of messing around with atomics. Get rid
of barriers in rbd_dev_v2_parent_info() while at it - I don't see what
they'd pair with now and I suspect we are in a pretty miserable
situation as far as proper locking goes regardless.
Cc: stable@vger.kernel.org # 3.11+
Signed-off-by: Ilya Dryomov <idryomov@redhat.com>
Reviewed-by: Josh Durgin <jdurgin@redhat.com>
Reviewed-by: Alex Elder <elder@linaro.org>
CAN to USB interfaces sold by the Swedish manufacturer Kvaser are
divided into two major families: 'Leaf', and 'USBcanII'. From an
Operating System perspective, the firmware of both families behave
in a not too drastically different fashion.
This patch adds support for the USBcanII family of devices to the
current Kvaser Leaf-only driver.
CAN frames sending, receiving, and error handling paths has been
tested using the dual-channel "Kvaser USBcan II HS/LS" dongle. It
should also work nicely with other products in the same category.
List of new devices supported by this driver update:
- Kvaser USBcan II HS/HS
- Kvaser USBcan II HS/LS
- Kvaser USBcan Rugged ("USBcan Rev B")
- Kvaser Memorator HS/HS
- Kvaser Memorator HS/LS
- Scania VCI2 (if you have the Kvaser logo on top)
Signed-off-by: Ahmed S. Darwish <ahmed.darwish@valeo.com>
Acked-by: Andri Yngvason <andri.yngvason@marel.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Replace most of the can interface's state and error counters
handling with the new can-dev can_change_state() mechanism.
Suggested-by: Andri Yngvason <andri.yngvason@marel.com>
Signed-off-by: Ahmed S. Darwish <ahmed.darwish@valeo.com>
Acked-by: Andri Yngvason <andri.yngvason@marel.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Update all of the can interface's state and error counters before
trying any skb allocation that can actually fail with -ENOMEM.
Suggested-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Ahmed S. Darwish <ahmed.darwish@valeo.com>
Acked-by: Andri Yngvason <andri.yngvason@marel.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The fix from 9fc81d8742 ("perf: Fix events installation during
moving group") was incomplete in that it failed to recognise that
creating a group with events for different CPUs is semantically
broken -- they cannot be co-scheduled.
Furthermore, it leads to real breakage where, when we create an event
for CPU Y and then migrate it to form a group on CPU X, the code gets
confused where the counter is programmed -- triggered in practice
as well by me via the perf fuzzer.
Fix this by tightening the rules for creating groups. Only allow
grouping of counters that can be co-scheduled in the same context.
This means for the same task and/or the same cpu.
Fixes: 9fc81d8742 ("perf: Fix events installation during moving group")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20150123125834.090683288@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
At least some gcc versions - validly afaict - warn about potentially
using max_group uninitialized: There's no way the compiler can prove
that the body of the conditional where it and max_faults get set/
updated gets executed; in fact, without knowing all the details of
other scheduler code, I can't prove this either.
Generally the necessary change would appear to be to clear max_group
prior to entering the inner loop, and break out of the outer loop when
it ends up being all clear after the inner one. This, however, seems
inefficient, and afaict the same effect can be achieved by exiting the
outer loop when max_faults is still zero after the inner loop.
[ mingo: changed the solution to zero initialization: uninitialized_var()
needs to die, as it's an actively dangerous construct: if in the future
a known-proven-good piece of code is changed to have a true, buggy
uninitialized variable, the compiler warning is then supressed...
The better long term solution is to clean up the code flow, so that
even simple minded compilers (and humans!) are able to read it without
getting a headache. ]
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/54C2139202000078000588F7@mail.emea.novell.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
For 64K page system, after mapping a PMD section, the corresponding initial
page table is not needed any more. That page can be freed.
Signed-off-by: Zhichang Yuan <zhichang.yuan@linaro.org>
[catalin.marinas@arm.com: added BUG_ON() to catch late memblock freeing]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
This patch fixes a systematic crash in rapl_scale()
due to an invalid pointer.
The bug was introduced by commit:
89cbc76768 ("x86: Replace __get_cpu_var uses")
The fix is simple. Just put the parenthesis where it needs
to be, i.e., around rapl_pmu. To my surprise, the compiler
was not complaining about passing an integer instead of a
pointer.
Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Tested-by: Vince Weaver <vincent.weaver@maine.edu>
Fixes: 89cbc76768 ("x86: Replace __get_cpu_var uses")
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: cl@linux.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20150122203834.GA10228@thinkpad
Signed-off-by: Ingo Molnar <mingo@kernel.org>
There were some issues about the uncore driver tried to access
non-existing boxes, which caused boot crashes. These issues have
been all fixed. But we should avoid boot failures if that ever
happens again.
This patch intends to prevent this kind of potential issues.
It moves uncore_box_init out of driver initialization. The box
will be initialized when it's first enabled.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1421729665-5912-1-git-send-email-kan.liang@intel.com
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Yan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We never set the ->scratch pointer, so let's delete it.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch fix warning while "make xmldocs".
Warning(.//sound/soc/soc-devres.c:70): No description
found for parameter 'platform_drv'
Warning(.//sound/soc/soc-devres.c:70): Excess function
parameter 'platform' description in 'devm_snd_soc_register_platform'
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
dw_mci_pltfm_remove() is not (nor should it be) marked as __exit,
so we should not be using __exit_p() wrapper with it.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Tested-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
dw_mci_pltfm_remove() is not (nor should it be) marked as __exit,
so we should not be using __exit_p() wrapper with it.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Tested-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Let MMC_SDHCI_BIG_ENDIAN_32BIT_BYTE_SWAPPER depend on MMC_SDHCI. Not
only this is more correct, but this also avoids breaking the alignment
of all other MMC_SDHCI_* options in menuconfig.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Chris Ball <chris@printf.net>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Albert Herranz <albert_herranz@yahoo.es>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Config option MMC_RICOH_MMC's help text reads:
If unsure, say Y.
However the option defaults to N. Set the default to Y to match the
recommendation in the help text.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Chris Ball <chris@printf.net>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Philipl Langdale <philipl@overt.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
DMA configuration has been removed from function mmci_dma_setup but the
local mask variable was not removed. This remains unused hence remove
it from the function and operations on it
Signed-off-by: Pramod Gurav <pramod.gurav@smartplayin.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This patch is to fix a race condition that may cause an unhandled irq,
which results in big sdhci interrupt numbers and endless "mmc1: got irq
while runtime suspended" msgs before v3.15.
Consider following scenario:
CPU0 CPU1
sdhci_pxav3_runtime_suspend()
spin_lock_irqsave(&host->lock, flags);
sdhci_irq()
spining on the &host->lock
host->runtime_suspended = true;
spin_unlock_irqrestore(&host->lock, flags);
get the &host->lock
runtime_suspended is true now
return IRQ_NONE;
Fix this race by using the core sdhci.c supplied sdhci_runtime_suspend_host()
in runtime suspend hook which will disable card interrupts. We also use the
sdhci_runtime_resume_host() in the runtime resume hook accordingly.
Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Cc: <stable@vger.kernel.org> # v3.9+
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Directly return the result of mmc_blk_alloc_req() instead of assigning
and returning the variable md.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The need for reset GPIOs has several times been pointed out from
erlier posted patchsets. Especially some WLAN chips which are
attached to an SDIO interface may use a GPIO reset.
The reset GPIO is asserted at initialization and prior we start the
power up procedure. The GPIO will be de-asserted right after the power
has been provided to the card, from the ->post_power_on() callback.
Note, the reset GPIO is optional. Thus we don't return an error even if
we can't find a GPIO for the consumer.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
To add the core part for the MMC power sequence, let's start by adding
initial support for the simple MMC power sequence provider.
In this initial step, the MMC power sequence node are fetched and the
compatible string for the simple MMC power sequence provider are
verified.
At this point we don't parse the node for any properties, but instead
that will be handled from following patches. Since there are no
properties supported yet, let's just implement the ->alloc() and the
->free() callbacks.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
To support SOCs which specifies specific MMC power sequences, document
some MMC DT bindings to be able to describe these hardwares.
Let's also document bindings for a simple MMC power sequence provider,
which purpose is to support a set of common properties between various
SOCs.
In this initial step, let's also document a top level description of
the MMC power sequence and describe the compatible string used for the
simple MMC power sequence provider.
The simple MMC power sequence provider will initially support a reset
GPIO. From several earlier posted patches, it's clear that such
hardware exists. Especially some WLAN chips which are attached to an
SDIO interface may use a GPIO reset.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
System on chip designs may specify a specific MMC power sequence. To
successfully detect an (e)MMC/SD/SDIO card, that power sequence must
be followed while initializing the card.
To be able to handle these SOC specific power sequences, let's add a
MMC power sequence interface. It provides the following functions to
help the mmc core to deal with these power sequences.
mmc_pwrseq_alloc() - Invoked from mmc_of_parse(), to initialize data.
mmc_pwrseq_pre_power_on()- Invoked in the beginning of mmc_power_up().
mmc_pwrseq_post_power_on()- Invoked at the end in mmc_power_up().
mmc_pwrseq_power_off()- Invoked from mmc_power_off().
mmc_pwrseq_free() - Invoked from mmc_free_host(), to free data.
Each MMC power sequence provider will be responsible to implement a set
of callbacks. These callbacks mirrors the functions above.
This patch adds the skeleton, following patches will extend the core of
the MMC power sequence and add support for a specific simple MMC power
sequence.
Do note, since the mmc_pwrseq_alloc() is invoked from mmc_of_parse(),
host drivers needs to make use of this API to enable the support for
MMC power sequences. Moreover the MMC power sequence support depends on
CONFIG_OF.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
