Commit graph

141,155 commits

Author SHA1 Message Date
Shlomo Pongratz
2af73d4b2a net/bonding: emit address change event also in bond_release
commit 7d26bb103c "bonding: emit event when bonding changes MAC" didn't
take care to emit the NETDEV_CHANGEADDR event in bond_release, where bonding
actually changes the mac address (to all zeroes). As a result the neighbours
aren't deleted by the core networking code (which does so upon getting that
event).

Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com>
Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-04 18:11:12 -04:00
Linus Torvalds
64ebe98731 More power management updates for 3.4
Fixes mostly, including:
 
 * Patch series that hopefully fixes races between the freezer and request_firmware()
   and request_firmware_nowait() for good, with two cleanups from Stephen Boyd on top.
 
 * Runtime PM fix from Alan Stern preventing tasks from getting stuck indefinitely
   in the runtime PM wait queue.
 
 * Device PM QoS update from MyungJoo Ham introducing a new variant of
   pm_qos_update_request() allowing the callers to specify a timeout.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iQIcBAABAgAGBQJPdmPZAAoJEKhOf7ml8uNsvcgQAIKBya3ESVg2PbB1riIRJ0M5
 3R5ntbQ0sxa631lIoipZLP6HeN2fgTcfTqhHpr9/dtt80Zh/HbNWee4XEmkJvGOK
 UuG/Vzg2IJA2LKYbRDEALm9GwvlG8ylIrz1mWOSt77K+seyjnvCyfQsoVd5S/+sz
 bzDCwIJlV/lvtynvAMfaZ+O75XW1uYRJ6a1ABviEU4o+J7OC9UCp0h/b9c1WZqDJ
 1X0pBU0/28ZFnYnK+zuAqwJg7pua/HrC0nT/pQTRSZ0kXAgt7uuqIlpVz9HXiqzu
 TVbu3uW6FPWT0TP/iFmKMA1eiQJHLXgshECaccVOoMzIG/pqYTNbfu9BzEho3tL9
 w716ruo1JoythvnlIz4j8R2RtiE8SxTzCqGm4OHcie72VUSqduIhWgRyZOFhebUo
 xqiUSN2cyYUf9SJoeg0TSmQdutoa7vnswZgq4qjlOz39OPxHrwAe5ROXIBwoHvnz
 akmBtnabyNVsRiLe9eIH5N5C9TxHDgZwS70SMYqo1D09Qo+NTUtvSVgC/NiIjhXb
 yY3UliDqGlkUhHJ+8ydntNb39VU4L1MO0IGzEvmvfXvSIcXavGkkmd9RV9yytLEK
 1ujq99NHITzxyuF2+bNGpPQVEVH3sQgAv/doFTiEZiUHIIAy5Fmy/+ipcurslXLm
 urlq4RLG+JXgPjw4XO14
 =ligR
 -----END PGP SIGNATURE-----

Merge tag 'pm-for-3.4-part-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull more power management updates from Rafael Wysocki:
 - Patch series that hopefully fixes races between the freezer and
   request_firmware() and request_firmware_nowait() for good, with two
   cleanups from Stephen Boyd on top.
 - Runtime PM fix from Alan Stern preventing tasks from getting stuck
   indefinitely in the runtime PM wait queue.
 - Device PM QoS update from MyungJoo Ham introducing a new variant of
   pm_qos_update_request() allowing the callers to specify a timeout.

* tag 'pm-for-3.4-part-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM / QoS: add pm_qos_update_request_timeout() API
  firmware_class: Move request_firmware_nowait() to workqueues
  firmware_class: Reorganize fw_create_instance()
  PM / Sleep: Mitigate race between the freezer and request_firmware()
  PM / Sleep: Move disabling of usermode helpers to the freezer
  PM / Hibernate: Disable usermode helpers right before freezing tasks
  firmware_class: Do not warn that system is not ready from async loads
  firmware_class: Split _request_firmware() into three functions, v2
  firmware_class: Rework usermodehelper check
  PM / Runtime: don't forget to wake up waitqueue on failure
2012-04-04 14:26:40 -07:00
Stephen Warren
4a3398ee9d gpio: tegra: Iterate over the correct number of banks
When Tegra30 support was added to the Tegra GPIO driver, a few places
which iterated over all banks were not converted to use the variable
tegra_gpio_bank_count rather than hard-coding the bank count. Fix this.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Olof Johansson <olof@lixom.net>
2012-04-04 13:13:18 -06:00
Stephen Warren
5c1e2c9dc6 gpio: tegra: fix register address calculations for Tegra30
Tegra20 and Tegra30 share the same register layout within registers, but
the addresses of the registers is a little different. Fix the driver to
cope with this.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Olof Johansson <olof@lixom.net>
2012-04-04 13:13:13 -06:00
Linus Torvalds
3ff8f932bc A simple bug that's been lurking for a while but not terribly visible
since a high proportion of chips have no register 0 so the normal
 failure is that we end up doing a bit of extra I/O.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJPeDKyAAoJEBus8iNuMP3dWh0P/A6sU2uMAYARug09o30JqN7E
 kwHbDvoAkEnn89t8vzaLf36527j+n6Pi1+m/GXt0O2SrzySY9iGsW5FOsGnrnWNV
 fTSPN0ATiAegjHRjf5IWIh9onilJNQ0Tr/jbYguaNrtbr3uGMqfctSdCJimz2Tm+
 VXTfQhOypNYrHWAgWpO9ioaERyuQ54IhZ11g7WUCQV4GAGeahLMcXqiBO1LFktN/
 HUynGqNBj3mMQRxy/ko74hNiXwOLiCV5FcnY9ycUn0a2Vnh/7vskavyPuIxblYNs
 N9YdtLxGxiOvXqvEmMTnigLxJT5sEKoivbesux7p99Nn0DVHvjdU07MF0tP16Ylk
 sxzdgwXkchIgMtZ4vdn45KVkAcI4mKHdU0Ggu8ax94cEZkyKFUJlgonwVybHW0lB
 75+Mv8nLqsD8DKobvCcZ8cuFRfGASqZEbqHvHZvd3IbhfRGYRWykDtxRvieWVe0v
 s7jB9hjSYNJQBDf3EF6oBHxuoAlmZ7m5afNcCFyrw5RzcP1kTyW5iqlCBP0cOm0s
 CrZOWjX54T51eqjBSHHK8c98AzKLsmwhalw1j20hA/+5WsIbp5owUpWyQMaKMW2f
 85qBd8OCvQnh7D5Z9GPhkEf5Vl+4WGfE3BhL8JPHVIPGE7t3nSNlFqS4rETdoqDi
 mhBOX9cUIoQkb+L44Dv+
 =i2aW
 -----END PGP SIGNATURE-----

Merge tag 'regmap-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap

Pull a single regmap fix from Mark Brown:
 "A simple bug that's been lurking for a while but not terribly visible
  since a high proportion of chips have no register 0 so the normal
  failure is that we end up doing a bit of extra I/O."

* tag 'regmap-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: rbtree: Fix register default look-up in sync
2012-04-04 10:10:14 -07:00
Linus Torvalds
4a1e8ebc5e regulator: Fixes for -rc1
A bunch of smallish fixes that came up during the merge window as
 things got more testing - even more fixes from Axel, a fix for error
 handling in more complex systems using -EPROBE_DEFER and a couple of
 small fixes for the new dummy regulators.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJPeDhzAAoJEBus8iNuMP3dh3sP/2i2M34Y66HkNGJCbkLgzGsu
 DlwbiNdh+o/uUcALCcyt7tYF06MhsJ4n7fOBRZ+hKr3VMTguHi6B36IKxGrfzBJs
 9XoYQkyO/92g3UjdWQSWKSQfx/qZhw167gmmeL8jQfEQOZZ2MhnCLbbZVsRMFGf6
 PzVDyW0StDWh0uBP6P7UU64pogFfUqSO/guIAqppUI9Ll/ulx0OqY+eov2mQzlmg
 Rqwjt9mF9UMZn4/Br0mQx+iUqqSugtA+2VAAiSx7K8JDjeMPh47S31p/FGCLXrmv
 Lbn2vQGn23RDthdxQlcisY/rJU5WsJbgdjjoppucyYJbYUWzVVMNM0djxtpGIQ7j
 x9X6ZTdG4RuphI5FDku/vKkNS4O/Y0+6bumpqFfXyBoAGOXMKdUmTymCNCogFnOy
 F6vMzrtA27M5HaFaRP3xnMSNU/aBegsgCoEjyQ1b5D1TAKvc5v614cZzyrWaCd+G
 gVE1lDIAo2snraRjZl9LDQwGKOkzEdLXJSzGZ7Pk9n54+QvRBJcYu3l/Wdrn4JES
 jtIprAyWbY4z6n5wuucwwjFZa2UtBukRTV8ZA/jMq+eig3VdN8CSKJCJUQTG+UgV
 fyCNq7WWAhK8rldcjgJhPspEbRazAEnaNwfZUWZAmmnb8bVVRO6pJOl2TiRN0DFt
 8MqdrQtJFusRXgrc+Wlq
 =h5VJ
 -----END PGP SIGNATURE-----

Merge tag 'regulator-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator fixes from Mark Brown:
 "A bunch of smallish fixes that came up during the merge window as
  things got more testing - even more fixes from Axel, a fix for error
  handling in more complex systems using -EPROBE_DEFER and a couple of
  small fixes for the new dummy regulators."

* tag 'regulator-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: Remove non-existent parameter from fixed-helper.c kernel doc
  regulator: Fix setting new voltage in s5m8767_set_voltage
  regulator: fix sysfs name collision between dummy and fixed dummy regulator
  regulator: Fix deadlock on removal of regulators with supplies
  regulator: Fix comments in include/linux/regulator/machine.h
  regulator: Only update [LDOx|DCx]_HIB_MODE bits in wm8350_[ldo|dcdc]_set_suspend_disable
  regulator: Fix setting low power mode for wm831x aldo
  regulator: Return microamps in wm8350_isink_get_current
  regulator: wm8350: Fix the logic to choose best current limit setting
  regulator: wm831x-isink: Fix the logic to choose best current limit setting
  regulator: wm831x-dcdc: Fix the logic to choose best current limit setting
  regulator: anatop: patching to device-tree property "reg".
  regulator: Do proper shift to set correct bit for DC[2|5]_HIB_MODE setting
  regulator: Fix restoring pmic.dcdcx_hib_mode settings in wm8350_dcdc_set_suspend_enable
  regulator: Fix unbalanced lock/unlock in mc13892_regulator_probe error path
  regulator: Fix set and get current limit for wm831x_buckv
  regulator: tps6586x: Fix list minimal voltage setting for LDO0
2012-04-04 10:09:30 -07:00
Kukjin Kim
2d1f6310d4 EXYNOS: fix dependency for EXYNOS_CPUFREQ
This fixes the CPUFREQ dependency for regarding EXYNOS SoCs
such as EXYNOS4210, EXYNOS4X12 and EXYNOS5250. Its cpufreq
driver should be built with selection of SoC arch part.

Reported-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Dave Jones <davej@redhat.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-04-04 10:09:03 -07:00
Linus Torvalds
6742259866 Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar.

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, kvm: Call restore_sched_clock_state() only after %gs is initialized
  x86: Use -mno-avx when available
  x86: Remove the ancient and deprecated disable_hlt() and enable_hlt() facility
  x86: Preserve lazy irq disable semantics in fixup_irqs()
2012-04-04 10:04:01 -07:00
Nicolas Ferre
9475375a5e USB: ehci-atmel: add needed of.h header file
Compilation error in case of non-DT configuration without this
of.h header file.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
2012-04-04 18:35:43 +02:00
Nicolas Ferre
1887ab2bf2 USB: ohci-at91: trivial return code name change
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
2012-04-04 18:35:33 +02:00
Nicolas Ferre
0ee6d1eeef USB: ohci-at91: change maximum number of ports
Change number of ports to 3 for newer SoCs. Modify pdata structure
and ohci-at91 code that was dealing with ports information and check
of port indexes.
Several coding style errors have been addresses as the patch was touching
affected lines of code and was producing errors while run through
checkpatch.pl.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
2012-04-04 18:35:24 +02:00
Nicolas Ferre
aaf9f5fc67 USB: ohci-at91: rework and fix initialization
The DT information are filled in a pdata structure and then passed on
to the usual check code of the probe function. Thus we do not need to
redo the gpio checking and irq configuration in the DT-related code.
On the other hand, we setup GPIO direction in driver for vbus and
overcurrent. It will be useful when moving to pinctrl subsystem.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
2012-04-04 18:35:15 +02:00
Nicolas Ferre
1e7caf8bcf USB: ohci-at91: fix vbus_pin_active_low handling
The information is not properly taken into account
for {get|set}_power() functions.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@vger.kernel.org>		[3.2+]
2012-04-04 18:34:43 +02:00
Linus Torvalds
20d9d9a054 hwmon patches for 3.4-rc2
Fix crash in ad7314 driver
 Add support for AMD Trinity CPUs to k10temp driver
 Fix __initdata/__initconst mixup in w83627ehf driver
 Fix runtime warnings in acpi_power_meter and max6639 drivers
 Fix build warnings in adm1031, f75375s, sht15, and gpio-fan drivers
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.10 (GNU/Linux)
 
 iQIcBAABAgAGBQJPfFUnAAoJEMsfJm/On5mBs+0P/3W6ZulnDdj97xXKzSHpdQr+
 y9rRNPAmJTGmtMe5t8ZvncMV4ZSzhV3CjW1qSyZON/4UsREcMYRAOSHuM9ZFPGqI
 oI4nSbMS+KfZtYOp5ehvHhYctaYDmAEArHsUbqDxWF6k1xruwTNpaDGnrZM7tc1a
 +Sm3rZFiGvAcJVtjoixpaQXsyFLY9zmD1+cdHhM1Adh7BwFnNpbb5an8rJBw+rBO
 /fy6FeAOkDug/apmmD/IBZutIFuHw85dVE9x7qJ4nj+8btPik7/AfKjR9NrQ5d24
 ivo4IjRFueCMqwMQJRg0lfuLHrMtVPno68u0HVYVQN88B/njkJayB+ArPbM2O0kH
 BiIHLi/JFEd5eviUX8UstW43PKdU/gll92vYoSED7p3Ldx+nywdMC3afe2GtN/k/
 dP51EgCZnhGFapAqLkW7uek+KWyeITSj3Dk5tAUIGpcJ+eSefCErNtI5IoxnoE1M
 H4XxyzFZTp6dR1KCH2M6aBCFxMNRXh84zVhNGnBUdmfFyT19Ahx6wh8qeeEL/rrR
 c7IVMbgXkc7DwD1l8aIAXag76lgCkHFnIRfhNwiIGGCs1GsdeUtSLclcC000DImc
 8VuNAg4VUTiyuMuElqRPWR9laRRBzUAFa53ZZEuoISKyKbAWxGmi7MyI7uZdZ58w
 tTBv4m8MCHFJ6YVCmJpV
 =C8Bx
 -----END PGP SIGNATURE-----

Merge tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon patches from Guenter Roeck:
 - Fix crash in ad7314 driver
 - Add support for AMD Trinity CPUs to k10temp driver
 - Fix __initdata/__initconst mixup in w83627ehf driver
 - Fix runtime warnings in acpi_power_meter and max6639 drivers
 - Fix build warnings in adm1031, f75375s, sht15, and gpio-fan drivers

* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (ad7314) Adds missing spi_dev initialization
  hwmon: (k10temp) Add support for AMD Trinity CPUs
  hwmon: (w83627ehf) mark const init data with __initconst instead of __initdata
  hwmon: (acpi_power_meter) fix lockdep spew due to non-static lock class
  hwmon: (adm1031) Fix compiler warning
  hwmon: (f75375s) Fix warning message seen in some configurations
  hwmon: (max6639) Convert to dev_pm_ops
  hwmon: (sht15) Fix Kconfig dependencies
  hwmon: (gpio-fan) Fix Kconfig dependencies
2012-04-04 09:03:41 -07:00
Linus Torvalds
7114a72ff8 One fix which makes MCE decoding much more "liberal" wrt families.
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJPfFQCAAoJEBLB8Bhh3lVKnMAP/je7vKTEJeQkFikqwmWJzssc
 xMHRXLEgrh86RQ5BxHOuiTemKIM6BtwylZQHSXl+idOkPVrHBwQ1xdRuB5SXF0Fc
 gBFYZXL9RUKh7wQYwvcIibQtbF75kJYqU5GlrIt5l6I8qY6xNuCRjuSVtBnw4v7j
 JVHpGDAzASaGX8KMqijE97JrQOp/08/+C0a+p0Xj2GmaJp7vsgfGAj6vbsOCk7xA
 dWpTh3wQnhM0g+i8+N2o3+DAgrJ6PQo3JUgBWS23u7bk4DU2Gj7LlPKhiCGu3PdP
 YRNuX+nDkNJs0I6KK8m0W+9u8nEzmPXp7DM40162FFXdIzlwYxMK9zUM9eXxr1yY
 wBFhQ3H9tS32gJzsNORkp8vDLFVqLV+uEhutDS3EaWneg7wwCrU6E3NRD1PyO7Me
 MzsWX/U1DFVZgG2/yOTKD9sJWtQ6g/D9NFUO2q6hGkk1O+kknGoAKpIXm/ok20oC
 kWNexfVFPnagixvntdeSQQvy9SEyEL+bVf8OMfv115eOeHsJTg85eyvOixPm4gLE
 MWAwkZ3hnLcL9Ugv45KXHWR3lgHLbyGk11oGC2Nu2WlRLdLnJpmdfQO/4QFtfSwL
 gUL23f6nWmUcJTWFAS+gP2iFALc6HvWHb6w9Jn4ZKZw5AjDCNLqpoQRyCG18h2Du
 hlfnPEiB2DGwbb0yZw+M
 =2kpn
 -----END PGP SIGNATURE-----

Merge tag 'mce-fix-for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp

Pull MCE fixlet from Borislav Petkov:
 "One fix which makes MCE decoding much more "liberal" wrt families."

* tag 'mce-fix-for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  MCE, AMD: Drop too granulary family model checks
2012-04-04 09:02:38 -07:00
Linus Torvalds
36bbffc0d5 md: Assort fixes for 3.4-rc
- some RAID levels didn't clear up properly if md_integrity_register
   failed
 - a 'check' of RAID5/RAID6 doesn't actually read any data
   since a recent patch - so fix that (and mark for -stable)
 - a couple of other minor bugs.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iQIVAwUAT3qOCznsnt1WYoG5AQK/JA//dHuk1IbB2KglxB6Cb6wDtoE9wqBWuN82
 W+Squ6u8e2iwwBSaKbuy+0+qb/ew20iRAHbHXt6LlNqRZCWbWuyBvjxxX0DnpVgF
 eRJajccy86BfHpsE7R794FHohBDW1dAlUSFXfF4o9y1QAqcyxT4v1y06p74SAJ4l
 3xmpp5oc7Qo3/CIC2ZpSgG+ileNn+KNiDafLz1adhrnd+EmewnTvrW84TWW91jzN
 eLE/+cpf1OlqyEwVsatxHf3SxbH2kd183paBeQs3qw8dwL4K6pag7M8Ca4tlxl88
 KO/+APSZRGY/RV3GWxcDjsWgJFWZC7Eq9cgYvpXcovDNb2r9vuJPipiVaa8BFcLd
 WBmULR0dwpoJm+OL2dJRncM17jn2+Q5JIA8VkiA/aDKXk1qTWDGIh/yoAs4RmTfI
 PdehSo9puYvBNUr3NW4YTG1PuPssUXLMWeXM6Q2LgPtaC0RYpZddI33x1rVK5Ro7
 5XuuyyNiSyUUkXJN2TVvsVQ6+d7Lf/Z9WBSE9kU1LaaDfd2hnZwCRhSgdhiZqJJM
 K3aagqgRsEM9SqLdQqZKCJVZ1zXPqgIcd20ByNdkO3ERUI1veAjlJlNPRHQ3ZEnR
 ELp0cvRvqKULqIPRt+EbO6tNjjcHS5Iq++JPoSi8fDgIGzqGpfFzpK5dL6C7tLep
 IkR+oDmYcAg=
 =IBql
 -----END PGP SIGNATURE-----

Merge tag 'md-3.4-fixes' of git://neil.brown.name/md

Pull assorted md fixes from Neil Brown:
 - some RAID levels didn't clear up properly if md_integrity_register
  failed
 - a 'check' of RAID5/RAID6 doesn't actually read any data since a
   recent patch - so fix that (and mark for -stable)
 - a couple of other minor bugs.

* tag 'md-3.4-fixes' of git://neil.brown.name/md:
  md/raid1,raid10: don't compare excess byte during consistency check.
  md/raid5: Fix a bug about judging if the operation is syncing or replacing
  md/raid1:Remove unnecessary rcu_dereference(conf->mirrors[i].rdev).
  md: Avoid OOPS when reshaping raid1 to raid0
  md/raid5: fix handling of bad blocks during recovery.
  md/raid1: If md_integrity_register() failed,run() must free the mem
  md/raid0: If md_integrity_register() fails, raid0_run() must free the mem.
  md/linear: If md_integrity_register() fails, linear_run() must free the mem.
2012-04-04 08:31:06 -07:00
Linus Torvalds
20a2a81160 Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-arm
Pull ARM fixes from Russell King:
 "Nothing too big here, just small fixes."

* 'fixes' of git://git.linaro.org/people/rmk/linux-arm:
  ARM: fix more fallout from 9f97da78bf (Disintegrate asm/system.h for ARM)
  ARM: fix bios32.c build warning
  ARM: 7337/1: ptrace: fix ptrace_read_user for !CONFIG_MMU platforms
  ARM: fix missing bug.h include in arch/arm/kernel/insn.c
  ARM: sa11x0: fix build errors from DMA engine API updates
2012-04-04 08:25:23 -07:00
Linus Torvalds
a92bc5a65c Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc
Pull Sparc fixes from David Miller:
 "One build regression and one serial probe regression fix on sparc."

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  serial/sunzilog: fix keyboard on SUN SPARCstation
  sparc: pgtable_64: change include order
2012-04-04 08:24:21 -07:00
Linus Torvalds
f3718a818f Revert "nouveau/bios: Fix tracking of BIOS image data"
This reverts commit d06221c061.

It turns out to trigger the "BUG_ON(!PageCompound(page))" in kfree(),
apparently because the code ends up trying to free somethng that was
never kmalloced in the first place.

BenH points out that the patch was untested and wasn't meant to go into
the upstream kernel that quickly in the first place.

Backtrace:
  bios_shadow
  bios_shadow_prom
  nv_mask
  init_io
  bios_shadow
  nouveau_bios_init
  NVReadVgaCrtc
  NVSetOwner
  nouveau_card_init
  nouveau_load

Reported-by: Meelis Roos <mroos@linux.ee>
Requested-by: Dave Airlie <airlied@gmail.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-04-04 08:16:25 -07:00
Borislav Petkov
ec3e82d6dc MCE, AMD: Drop too granulary family model checks
MCA details seldom change inbetween the models of a family so don't
be too conservative and enable decoding on everything starting from
K8 onwards. Minor adjustments can come in later but most importantly,
we have some decoding infrastructure in place for upcoming models by
default.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2012-04-04 15:50:11 +02:00
Sam Ravnborg
ca6f327dfd serial/sunzilog: fix keyboard on SUN SPARCstation
The keyboard on my SUN SPARCstation 5 no longer worked.

    The culprint was: d4e33fac24
    ("serial: Kill off NO_IRQ")

Fix up logic for no irq / irq so the keyboard works again.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-04 00:37:10 -07:00
Graeme Smecher
e16de9137c hwmon: (ad7314) Adds missing spi_dev initialization
This driver was recently moved from IIO (where it worked) to hwmon (where
it doesn't.) This breakage occured because the hwmon version neglected to
correctly initialize a reference to spi_dev in its drvdata. The result is a
segfault every time the temperature is queried.

Signed-off-by: Graeme Smecher <gsmecher@threespeedlogic.com>
Cc: stable@vger.kernel.org # 3.2+
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-04-03 17:08:28 -07:00
Artem Savkov
cff4c16296 r8169: enable napi on resume.
NAPI is disabled during suspend and needs to be enabled on resume. Without
this the driver locks up during resume in rtl_reset_work() trying to disable
NAPI again.

Signed-off-by: Artem Savkov <artem.savkov@gmail.com>
Acked-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-03 19:08:40 -04:00
Yuval Mintz
f2ed5ee1b0 bnx2x: correction to firmware interface
Commit 621b4d6 updated the bnx2x driver to a new FW version, but lacked
a commit to a header file with changes to the firmware's interface.
The missing interface change causes iscsi and fcoe to misbehave with the
updated firmware.

Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
CC: Michael Chan <mchan@broadcom.com>
CC: Bhanu Prakash Gollapudi <bprakash@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-03 19:03:36 -04:00
Srinivas Kandagatla
b3300146aa phy:icplus:fix Auto Power Saving in ip101a_config_init.
This patch fixes Auto Power Saving configuration in ip101a_config_init
which was broken as there is no phy register write followed after
setting IP101A_APS_ON flag.

This patch also fixes the return value of ip101a_config_init.

Without this patch ip101a_config_init returns 2 which is not an error
accroding to IS_ERR and the mac driver will continue accessing 2 as
valid pointer to phy_dev resulting in memory fault.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-03 18:48:58 -04:00
David S. Miller
6fc8cc3fd1 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net 2012-04-03 18:41:12 -04:00
Matthew Vick
bf03085f85 e1000e: Guarantee descriptor writeback flush success.
In rare circumstances, a descriptor writeback flush may not work if it
arrives on a specific clock cycle as a writeback request is going out.

Signed-off-by: Matthew Vick <matthew.vick@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-04-03 15:25:16 -07:00
Bruce Allan
bb9e44d0d0 e1000e: prevent oops when adapter is being closed and reset simultaneously
When the adapter is closed while it is simultaneously going through a
reset, it can cause a null-pointer dereference when the two different code
paths simultaneously cleanup up the Tx/Rx resources.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-04-03 15:25:08 -07:00
Multanen, Eric W
aacc1bea19 ixgbe: driver fix for link flap
Fix up code so that changes in DCB settings
are detected only when ixgbe_dcbnl_set_all is called.
Previously, a series of 'change' commands followed by
a call to ixgbe_dcbnl_set_all() would always be handled
as a HW change - even if the net change was zero.
This patch checks for this case of no actual change and
skips going through the HW set process.

Without this fix, the link could reset and result in
a link flap.

The core change in this patch is to check for changes
in the ixgbe_copy_dcb_cfg() routine - and return
a bitmask of detected changes.  The other
places where changes were detected previously can be removed.

Signed-off-by: Eric Multanen <eric.w.multanen@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-04-03 15:24:57 -07:00
David Woodhouse
e675f0cc9a ppp: Don't stop and restart queue on every TX packet
For every transmitted packet, ppp_start_xmit() will stop the netdev
queue and then, if appropriate, restart it. This causes the TX softirq
to run, entirely gratuitously.

This is "only" a waste of CPU time in the normal case, but it's actively
harmful when the PPP device is a TEQL slave — the wakeup will cause the
offending device to receive the next TX packet from the TEQL queue, when
it *should* have gone to the next slave in the list. We end up seeing
large bursts of packets on just *one* slave device, rather than using
the full available bandwidth over all slaves.

This patch fixes the problem by *not* unconditionally stopping the queue
in ppp_start_xmit(). It adds a return value from ppp_xmit_process()
which indicates whether the queue should be stopped or not.

It *doesn't* remove the call to netif_wake_queue() from
ppp_xmit_process(), because other code paths (especially from
ppp_output_wakeup()) need it there and it's messy to push it out to the
other callers to do it based on the return value. So we leave it in
place — it's a no-op in the case where the queue wasn't stopped, so it's
harmless in the TX path.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-03 17:31:38 -04:00
Linus Torvalds
01627d968c Merge branch 'drm-fixes-intel' of git://people.freedesktop.org/~airlied/linux
Pull drm update from Dave Airlie:
 "This pull just contains a forward of the Intel fixes from Daniel.

  The only annoyance is the RC6 enable, which really should have made
  -next, but since Ubuntu are shipping it I reckon its getting a good
  testing now by the time 3.4 comes out.

  The pull from Daniel contains his pull message to me:

    "A few patches for 3.4, major part is 3 regression fixes:
     - ppgtt broke hibernate on snb/ivb.  Somehow our QA claims that it
       still works, which is why this has not been caught earlier.
     - ppgtt flails in combination with dmar.  I kinda expected this one :(
     - fence handling bugfix for gen2/3.  Iirc this one is about a year
       old, fix curtesy Chris Wilson.  I've created an shockingly simple
       i-g-t test to catch this in the future."

     Wrt regressions I've just got a report that gmbus (newly enabled
     again in 3.4) is a bit noisy.  I'm looking into this atm.

     Also included are the rc6 enable patches for snb from Eugeni.  I
     wanted to include these in the main 3.4 pull but screwed it up.
     Please hit me.  Imo these kind of patches really should go in
     before -rc1, but in thise case rc6 has brought us tons of press and
     guinea pigs^W^W testers and ubuntu is already running with it.  So
     I estimate a pretty small chance for this to blow up.

     And some smaller things:
      - two minor locking snafus
      - server gt2 ivb pciid
      - 2 patches to sanitize the register state left behind by the bios
        some more
      - 2 new quirk entries
      - cs readback trick against missed IRQs from ivb also enabled on snb
      - sprite fix from Jesse"

Let's see if the "enable RC6 on sandybridge" finally works and sticks.
I've been enabling it by hand (i915.i915_enable_rc6=1) for several
months on my Macbook Air, and it definitely makes a difference (and has
worked for me).  But every time we enabled it before it showed some odd
hw buglet for *somebody*.

This time it's all good, I'm sure.

* 'drm-fixes-intel' of git://people.freedesktop.org/~airlied/linux:
  drm/i915: treat src w & h as fixed point in sprite handling code
  drm/i915: no-lvds quirk on MSI DC500
  drm/i915: Add lock on drm_helper_resume_force_mode
  drm/i915: don't leak struct_mutex lock on ppgtt init failures
  drm/i915: disable ppgtt on snb when dmar is enabled
  drm/i915: add Ivy Bridge GT2 Server entries
  drm/i915: properly clear SSC1 bit in the pch refclock init code
  drm/i915: apply CS reg readback trick against missed IRQ on snb
  drm/i915: quirk away broken OpRegion VBT
  drm/i915: enable plain RC6 on Sandy Bridge by default
  drm/i915: allow to select rc6 modes via kernel parameter
  drm/i915: Mark untiled BLT commands as fenced on gen2/3
  drm/i915: properly restore the ppgtt page directory on resume
  drm/i915: Sanitize BIOS debugging bits from PIPECONF
2012-04-03 10:13:34 -07:00
Linus Torvalds
e1a7eb08ee Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
 "Mainly nouveau fixes, one for a regressions in -rc1, fixes for booting
  on a ppc G5, and a Kconfig fix.  Two radeon fixes, one oops, one s/r
  fix.  One udl mmap fix.  And one core drm fix to stop bad fbdev apps
  overwriting bits of ram."

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm: Validate requested virtual size against allocated fb size
  drm/radeon: Don't dereference possibly-NULL pointer.
  mm, drm/udl: fixup vma flags on mmap
  drm/radeon/kms: fix fans after resume
  nouveau/bios: Fix tracking of BIOS image data
  nouveau: Fix crash when pci_ram_rom() returns a size of 0
  drm/nouveau: select POWER_SUPPLY
  drm/nouveau: inform userspace of relaxed kernel subchannel requirements
  Revert "drm/nouveau: inform userspace of new kernel subchannel requirements"
  drm/nouveau: oops, create m2mf for nvd9 too
2012-04-03 10:12:21 -07:00
Mark Brown
e466de0519 regmap: Export regcache_sync_region()
regcache_sync_region() isn't going to be useful to most drivers if we
don't export it since otherwise they can't use it when built modular.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-03 13:08:53 +01:00
Chris Wilson
62fb376e21 drm: Validate requested virtual size against allocated fb size
mplayer -vo fbdev tries to create a screen that is twice as tall as the
allocated framebuffer for "doublebuffering". By default, and all in-tree
users, only sufficient memory is allocated and mapped to satisfy the
smallest framebuffer and the virtual size is no larger than the actual.
For these users, we should therefore reject any userspace request to
create a screen that requires a buffer larger than the framebuffer
originally allocated.

References: https://bugs.freedesktop.org/show_bug.cgi?id=38138
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-04-03 11:18:46 +01:00
Jesse Barnes
b4db1e35ac drm/i915: treat src w & h as fixed point in sprite handling code
This was missed when we converted the source values to 16.16 fixed point.

Cc: stable@vger.kernel.org
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-04-03 11:33:33 +02:00
Anisse Astier
97effadb65 drm/i915: no-lvds quirk on MSI DC500
This hardware doesn't have an LVDS, it's a desktop box. Fix incorrect
LVDS detection.

Cc: stable@kernel.org
Signed-off-by: Anisse Astier <anisse@astier.eu>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-04-03 10:44:05 +02:00
Sean Paul
927a2f119e drm/i915: Add lock on drm_helper_resume_force_mode
i915_drm_thaw was not locking the mode_config lock when calling
drm_helper_resume_force_mode. When there were multiple wake sources,
this caused FDI training failure on SNB which in turn corrupted the
display.

Signed-off-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@kernel.org
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-04-03 10:37:37 +02:00
Daniel Vetter
e02f14cd48 drm/i915: don't leak struct_mutex lock on ppgtt init failures
Reported-by: Konstantin Belousov <kostikbel@gmail.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-04-03 10:25:33 +02:00
NeilBrown
5020ad7d14 md/raid1,raid10: don't compare excess byte during consistency check.
When comparing two pages read from different legs of a mirror, only
compare the bytes that were read, not the whole page.

In most cases we read a whole page, but in some cases with
bad blocks or odd sizes devices we might read fewer than that.

This bug has been present "forever" but at worst it might cause
a report of two many mismatches and generate a little bit
extra resync IO, so there is no need to back-port to -stable
kernels.

Reported-by: majianpeng <majianpeng@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2012-04-03 15:39:23 +10:00
majianpeng
c6d2e084c7 md/raid5: Fix a bug about judging if the operation is syncing or replacing
When create a raid5 using assume-clean and echo check or repair to
sync_action.Then component disks did not operated IO but the raid
check/resync faster than normal.
Because the judgement in function analyse_stripe():
		if (do_recovery ||
		    sh->sector >= conf->mddev->recovery_cp)
			s->syncing = 1;
		else
			s->replacing = 1;
When check or repair,the recovery_cp == MaxSectore,so syncing equal zero
not one.

This bug was introduced by commit 9a3e1101b8
    md/raid5:  detect and handle replacements during recovery.
so this patch is suitable for 3.3-stable.

Cc: stable@vger.kernel.org
Signed-off-by: majianpeng <majianpeng@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2012-04-03 15:37:38 +10:00
majianpeng
a42f9d83b5 md/raid1:Remove unnecessary rcu_dereference(conf->mirrors[i].rdev).
Because rde->nr_pending > 0,so can not remove this disk.
And in any case, we aren't holding rcu_read_lock()

Signed-off-by: majianpeng <majianpeng@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2012-04-03 15:37:33 +10:00
Jes Sorensen
24b961f811 md: Avoid OOPS when reshaping raid1 to raid0
raid1 arrays do not have the notion of chunk size. Calculate the
largest chunk sector size we can use to avoid a divide by zero OOPS
when aligning the size of the new array to the chunk size.

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2012-04-03 15:37:26 +10:00
NeilBrown
18b9837ea0 md/raid5: fix handling of bad blocks during recovery.
1/ We can only treat a known-bad-block like a read-error if we
   have the data that belongs in that block.  So fix that test.

2/ If we cannot recovery a stripe due to insufficient data,
   don't tell "md_done_sync" that the sync failed unless we really
   did fail something.  If we successfully record bad blocks,
   that is success.

Reported-by: "majianpeng" <majianpeng@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2012-04-03 15:36:17 +10:00
Paul Gortmaker
beca98c93d ARM: fix lcd power build failure in collie_defconfig
Commit 086ada54ab

  "FB: sa1100: remove global sa1100fb_.*_power function pointers"

got rid of all instances but one in locomolcd.c -- which was
conditional on CONFIG_SA1100_COLLIE.  The associated .power
field which replaces the global is populated in mach-sa1100/collie.c
so move the assignment there, but make it conditional on the
locomolcd support, so use CONFIG_BACKLIGHT_LOCOMO in that file.

Cc: arm@kernel.org
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2012-04-02 22:03:44 -07:00
NeilBrown
f283d22713 APM: fix deadlock in APM_IOC_SUSPEND ioctl
I found the Xorg server on my ARM device stuck in the 'msleep()' loop
in apm_ioctl.

I suspect it had attempted suspend immediately after resuming and lost
a race.
During that msleep(10);, a new suspend cycle must have started and
changed ->suspend_state to SUSPEND_PENDING, so it was never seen to
be SUSPEND_DONE and the loop could never exited.  It would have moved on
to SUSPEND_ACKTO but never been able to reach SUSPEND_DONE.

So change the loop to only run while SUSPEND_ACKED rather than until
SUSPEND_DONE.  This is much safer.

Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-04-03 03:42:36 +02:00
Linus Torvalds
7d6e1cb7ae Merge branch 'drm-prime-dmabuf-initial' of git://people.freedesktop.org/~airlied/linux
Pull dma-buf prime support from Dave Airlie:
 "This isn't a majorly urgent thing to have, but we'd like to set the
  stage for working on dma-buf support in the drm drivers for the next
  merge window, so I'd like to push in the initial submission now so
  people have something that we can build on top of.  The code just
  introduces the user interface and internal helper functions for
  drivers to use.

  We have driver support under development for i915, nouveau, udl on x86
  and exynos, omapdrm on arm, which we would be aiming for the next
  merge window."

In the -rc1 announcement I asked for people who would use this to
comment on it, and got severa "Yes please" from people for this and for
HSI (that I merged earlier).

So far crickets on pohmelfs and the DMA-mapping infrastructure.

* 'drm-prime-dmabuf-initial' of git://people.freedesktop.org/~airlied/linux:
  drm: base prime/dma-buf support (v5)
2012-04-02 17:58:04 -07:00
Linus Torvalds
ed359a3b7b Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:

 1) Provide device string properly for USB i2400m wimax devices, also
    don't OOPS when providing firmware string.  From Phil Sutter.

 2) Add support for sh_eth SH7734 chips, from Nobuhiro Iwamatsu.

 3) Add another device ID to USB zaurus driver, from Guan Xin.

 4) Loop index start in pool vector iterator is wrong causing MAC to not
    get configured in bnx2x driver, fix from Dmitry Kravkov.

 5) EQL driver assumes HZ=100, fix from Eric Dumazet.

 6) Now that skb_add_rx_frag() can specify the truesize increment
    separately, do so in f_phonet and cdc_phonet, also from Eric
    Dumazet.

 7) virtio_net accidently uses net_ratelimit() not only on the kernel
    warning but also the statistic bump, fix from Rick Jones.

 8) ip_route_input_mc() uses fixed init_net namespace, oops, use
    dev_net(dev) instead.  Fix from Benjamin LaHaise.

 9) dev_forward_skb() needs to clear the incoming interface index of the
    SKB so that it looks like a new incoming packet, also from Benjamin
    LaHaise.

10) iwlwifi mistakenly initializes a channel entry as 2GHZ instead of
    5GHZ, fix from Stanislav Yakovlev.

11) Missing kmalloc() return value checks in orinoco, from Santosh
    Nayak.

12) ath9k doesn't check for HT capabilities in the right way, it is
    checking ht_supported instead of the ATH9K_HW_CAP_HT flag.  Fix from
    Sujith Manoharan.

13) Fix x86 BPF JIT emission of 16-bit immediate field of AND
    instructions, from Feiran Zhuang.

14) Avoid infinite loop in GARP code when registering sysfs entries.
    From David Ward.

15) rose protocol uses memcpy instead of memcmp in a device address
    comparison, oops.  Fix from Daniel Borkmann.

16) Fix build of lpc_eth due to dev_hw_addr_rancom() interface being
    renamed to eth_hw_addr_random().  From Roland Stigge.

17) Make ipv6 RTM_GETROUTE interpret RTA_IIF attribute the same way
    that ipv4 does.  Fix from Shmulik Ladkani.

18) via-rhine has an inverted bit test, causing suspend/resume
    regressions.  Fix from Andreas Mohr.

19) RIONET assumes 4K page size, fix from Akinobu Mita.

20) Initialization of imask register in sky2 is buggy, because bits are
    "or'd" into an uninitialized local variable.  Fix from Lino
    Sanfilippo.

21) Fix FCOE checksum offload handling, from Yi Zou.

22) Fix VLAN processing regression in e1000, from Jiri Pirko.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (52 commits)
  sky2: dont overwrite settings for PHY Quick link
  tg3: Fix 5717 serdes powerdown problem
  net: usb: cdc_eem: fix mtu
  net: sh_eth: fix endian check for architecture independent
  usb/rtl8150 : Remove duplicated definitions
  rionet: fix page allocation order of rionet_active
  via-rhine: fix wait-bit inversion.
  ipv6: Fix RTM_GETROUTE's interpretation of RTA_IIF to be consistent with ipv4
  net: lpc_eth: Fix rename of dev_hw_addr_random
  net/netfilter/nfnetlink_acct.c: use linux/atomic.h
  rose_dev: fix memcpy-bug in rose_set_mac_address
  Fix non TBI PHY access; a bad merge undid bug fix in a previous commit.
  net/garp: avoid infinite loop if attribute already exists
  x86 bpf_jit: fix a bug in emitting the 16-bit immediate operand of AND
  bonding: emit event when bonding changes MAC
  mac80211: fix oper channel timestamp updation
  ath9k: Use HW HT capabilites properly
  MAINTAINERS: adding maintainer for ipw2x00
  net: orinoco: add error handling for failed kmalloc().
  net/wireless: ipw2x00: fix a typo in wiphy struct initilization
  ...
2012-04-02 17:53:39 -07:00
Lino Sanfilippo
2240eb4ae3 sky2: dont overwrite settings for PHY Quick link
This patch corrects a bug in function sky2_open() of the Marvell Yukon 2 driver
in which the settings for PHY quick link are overwritten.

Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Acked-by: Stephen Hemminger <shemminger@vyattta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-02 18:41:06 -04:00
Matt Carlson
085f1afc56 tg3: Fix 5717 serdes powerdown problem
If port 0 of a 5717 serdes device powers down, it hides the phy from
port 1.  This patch works around the problem by keeping port 0's phy
powered up.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-02 17:41:42 -04:00
Chris Metcalf
00a62d4bc9 drivers/net/ethernet/tile: fix netdev_alloc_skb() bombing
Commit dae2e9f430 changed dev_alloc_skb()
to netdev_alloc_skb(), adding a dev pointer, but erroneously used "->"
instead of "." for a struct member when accessing the dev pointer.
This change fixes the build breakage.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-04-02 13:17:37 -04:00