Thaw and poweroff routines are missing for spear-keyboard. They are
required for:
- Error case scenarios during freeze
- Using test features, of hibernate.
Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Rajeev Kumar <rajeev-dlh.kumar@st.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Let platform pass mode information to keyboard driver according to which
it configures itself. The mode can be
- KEYPAD_9x9 0
- KEYPAD_6x6 1
- KEYPAD_2x2 2
Signed-off-by: Rajeev Kumar <rajeev-dlh.kumar@st.com>
Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
The major features of this series are:
- making RCU more aggressive about entering dyntick-idle mode in order to
improve energy efficiency
- converting a few more call_rcu()s to kfree_rcu()s
- applying a number of rcutree fixes and cleanups to rcutiny
- removing CONFIG_SMP #ifdefs from treercu
- allowing RCU CPU stall times to be set via sysfs
- adding CPU-stall capability to rcutorture
- adding more RCU-abuse diagnostics
- updating documentation
- fixing yet more issues located by the still-ongoing top-to-bottom
inspection of RCU, this time with a special focus on the
CPU-hotplug code path.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Register driver's ht capabilities in wiphy to avoid failures
in setting ht channels from hostapd.
Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
If kzalloc() for TYPE_DATA failed on a given cpu, previous chunk
of TYPE_INST will be leaked. Fix it.
Thanks to Peter Zijlstra for suggesting this better solution. It
should work as long as the initial value of the region is all
0's and that's the case of static (per-cpu) memory allocation.
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Link: http://lkml.kernel.org/r/1330391978-28070-1-git-send-email-namhyung.kim@lge.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Without this change, SDIO shuts down due to CRC error during
data communication to the firmware in some of the platform.
for example, scan request issued to the firmware doesn't
return scan completed events and cause the socket interface
to always return -16 (device busy).
SDIO pad drive strength should be reduced for hw2.1.1 board
to avoid such errors.
Signed-off-by: Raja Mani <rmani@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
This makes the device get into scan state as soon as a
scan request is received, instead of blocking the scan
request till the traffic comes down. It is necessary
for the deterministic foreground scan particularly when
having multiple vif operating where, if the scan is non-
deterministic, scan on one interface will not start
as long as there are traffic on the other interface. This
change passes 50 msec as foreground scan interval to fix this.
Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Broken by commit 6ef84509f3 for users
passing a request with non-zero 'nbytes' field, like e.g. testmgr.
Cc: <stable@kernel.org> # 3.0+
Signed-off-by: Phil Sutter <phil.sutter@viprinet.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/drm-intel:
drm/i915: Remove use of the autoreported ringbuffer HEAD position
drm/i915: Prevent a machine hang by checking crtc->active before loading lut
drm/i915: fix operator precedence when enabling RC6p
drm/i915: fix a sprite watermark computation to avoid divide by zero if xpos<0
drm/i915: fix mode set on load pipe. (v2)
htc_packet and htc_packet->buf_start are separately allocated
for endpoint 0. This is different for other endpoints where
packets are allocated as skb where htc_packet is skb->head
and they are freed properly. Free htc_packet and htc_packet->buf_start
separatly for endpoint 0.
Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Rx buffers should be allocated for control and best effort endpoints only
after the enpoints connection is esablished. But this is done before the
endpoint connection is complete, we don't even the control and BE endpoints
that time. Move the buffer allocation after endpoint connection is over,
after ath6kl_init_hw_start(). Found in review, never seen any real issue
with this.
Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
We shouldn't hold any locks on release path. Pass a flag to
vhost_dev_cleanup to use the lockdep info correctly.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Sasha Levin <levinsasha928@gmail.com>
This is a tiny, but important, patch to vhost.
Vhost's worker thread only called schedule() when it had no work to do, and
it wanted to go to sleep. But if there's always work to do, e.g., the guest
is running a network-intensive program like netperf with small message sizes,
schedule() was *never* called. This had several negative implications (on
non-preemptive kernels):
1. Passing time was not properly accounted to the "vhost" process (ps and
top would wrongly show it using zero CPU time).
2. Sometimes error messages about RCU timeouts would be printed, if the
core running the vhost thread didn't schedule() for a very long time.
3. Worst of all, a vhost thread would "hog" the core. If several vhost
threads need to share the same core, typically one would get most of the
CPU time (and its associated guest most of the performance), while the
others hardly get any work done.
The trivial solution is to add
if (need_resched())
schedule();
After doing every piece of work. This will not do the heavy schedule() all
the time, just when the timer interrupt decided a reschedule is warranted
(so need_resched returns true).
Thanks to Abel Gordon for this patch.
Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Enables port E of IDT 92HD91 codec as output and sets correct output
phase between ports E and D and high pass filter.
Signed-off-by: Vitaliy Kulikov <Vitaliy.Kulikov@idt.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
gpio-pxa driver is shared among arch-pxa and arch-mmp. Clock is the
essential component on pxa3xx/pxa95x and arch-mmp. So we need to
define dummy clock in pxa25x/pxa27x instead.
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
IRQ name is required in gpio-pxa driver. So we need to append the name
in gpio device. Otherwise, we can't register gpio-pxa driver
successfully.
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
The hx4700 platform has 72 board gpios: 64 ASIC3 gpios numbered 192..255, and
8 EGPIO gpios numbered 256..263 (plus a 9th which is not used).
Thus the new CONFIG_ARCH_NR_GPIO config option must be set to 264.
Signed-off-by: Paul Parsons <lost.distance@yahoo.com>
Acked-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
Add LED support for the HTC ASIC3. Underlying support is provided by the mfd/asic3 and leds/leds-asic3 drivers. An example configuration is provided by the pxa/hx4700 platform.
Signed-off-by: Paul Parsons <lost.distance@yahoo.com>
Acked-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
The HP iPAQ hx4700 has 128Mb of flash provided by two Intel StrataFlash devices.
The hx4700 platform configuration defines a single 128Mb flash resource,
resulting in the MTD physmap-flash driver probing the first device only and
presuming the second device is identical:
physmap platform flash device: 08000000 at 00000000
physmap-flash: Found 2 x16 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000089 Chip ID 0x008816
physmap-flash: Found 2 x16 devices at 0x4000000 in 32-bit bank
<snip>
erase region 0: offset=0x0,size=0x10000,blocks=4
erase region 1: offset=0x40000,size=0x40000,blocks=255
erase region 2: offset=0x4000000,size=0x10000,blocks=4
erase region 3: offset=0x4040000,size=0x40000,blocks=255
physmap-flash: 2 set(s) of 2 interleaved chips --> 32 partitions of 4096 KiB
Unfortunately the two devices are not identical. The first has a device ID of
0x8816, identifying a bottom parameter device. The second has a device ID of
0x8813, identifying a top parameter device. By not probing the second device,
physmap-flash does not discover the correct block sizes.
This patch splits the configuration into two 64Mb flash resources, forcing
physmap-flash to probe both devices and thus discover the correct block sizes:
physmap platform flash device: 04000000 at 00000000
physmap-flash: Found 2 x16 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000089 Chip ID 0x008816
<snip>
erase region 0: offset=0x0,size=0x10000,blocks=4
erase region 1: offset=0x40000,size=0x40000,blocks=255
physmap-flash: 1 set(s) of 2 interleaved chips --> 16 partitions of 4096 KiB
physmap platform flash device: 04000000 at 04000000
physmap-flash: Found 2 x16 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000089 Chip ID 0x008813
<snip>
erase region 0: offset=0x0,size=0x40000,blocks=255
erase region 1: offset=0x3fc0000,size=0x10000,blocks=4
physmap-flash: 1 set(s) of 2 interleaved chips --> 16 partitions of 4096 KiB
Concatenating MTD devices:
(0): "physmap-flash"
(1): "physmap-flash"
into device "physmap-flash"
Signed-off-by: Paul Parsons <lost.distance@yahoo.com>
Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
sa1100-rtc driver could be shared among sa1100/pxa/mmp series silicon.
Since clk is used in mmp series silicon, add dummy clock support in
pxa also.
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Add rtc clock support and clean clock support for gpio.
Signed-off-by: Jett.Zhou <jtzhou@marvell.com>
signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Avoid to hard coded irq in rtc-sa1100 driver since we could share
it among arch-sa1100/arch-pxa/arch-mmp.
We still keep hard coded register address since the requirement is
enabling both rtc-sa1100 and rtc-pxa driver. The register addresses
are conflict since they're only two wrappers on the same rtc device.
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Since next alarm time is already calculated in rtc common interface, we
needn't keep this logic in rtc-sa1100.c any more.
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Since periodic timer is already supported by hrtimer in rtc interface,
we needn't keep the duplicated code in rtc-sa1100.c any more.
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
This patch fixes the code to use the proper LMP_HOST_SSP define instead
of magic values and thereby makes the code more readable.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
To get rid of things like:
arch/ia64/sn/kernel/sn2/sn_hwperf.c:1002:1: warning: data definition has no type or storage class
arch/ia64/sn/kernel/sn2/sn_hwperf.c:1002:1: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL'
arch/ia64/sn/kernel/sn2/sn_hwperf.c:1002:1: warning: parameter names (without types) in function declaration
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
This patch adds missing SSP and "Simultaneous LE & BR/EDR" feature bit
definitions to hci.h.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Fix IMA kconfig warning on non-X86 architectures:
warning: (IMA) selects TCG_TIS which has unmet direct dependencies
(TCG_TPM && X86)
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
Previously the write_le_enable would trigger a read_host_features
command but since we have access to the value LE support was set to we
can simply just clear or set the bit in hdev->host_features. This also
removes a second unnecessary read_host_features command from the device
initialization procedure since LE is only enabled after the first
read_host_features command completes.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
If the local host features indicate that LE is already in the state that
is desired there's no point in sending the HCI command to try to change
the setting.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
make_min_config test failed to work because the snowball board I was tesing
it against had a config that would not build. But the make_min_config
only tested the testing part and ignored build failures. The end result
was a config file that would not boot.
This time, for real.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=wlL8
-----END PGP SIGNATURE-----
Merge tag 'ktest-fix-make-min-failed-build-for-real' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest
While demoing ktest at ELC in 2012, it was embarrassing that the
make_min_config test failed to work because the snowball board I was
testing it against had a config that would not build. But the
make_min_config only tested the testing part and ignored build failures.
The end result was a config file that would not boot.
This time, for real.
* tag 'ktest-fix-make-min-failed-build-for-real' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
ktest: Fix make_min_config test when build fails
If X32 is enabled in .config, but the binutils can't build it, issue a
warning and disable the feature rather than erroring out.
In order to support this, have CONFIG_X86_X32 be the option set in
Kconfig, and CONFIG_X86_X32_ABI be the option set by the Makefile when
it is enabled and binutils has been found to be functional.
Requested-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: H. J. Lu <hjl.tools@gmail.com>
Link: http://lkml.kernel.org/r/1329696488-16970-1-git-send-email-hpa@zytor.com
This is a fixup for my:
iwlwifi: kill iwl_bus.h
Please fold them into one patch for upstream
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
We can use forward declaration for the relevant struct since they
aren't dereferenced in the header file.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Also add a might_sleep to enforce the context requirements.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
