For some strange reason I used ALIGN() to calculate index to the
buffer. That is totally bogus and wouldn't work when it tried to read
the second bit. Fix it by removing the ALIGN() altogether.
Also check that ie_len is not too short.
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
This way it's possible to keep all disconnect logic in one function and
easier to add new functionality, like stopping scheduled scan.
There are some changes to commands called during network interface close,
but there should not be any visible changes in functionality.
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
There's a workaround in ath6kl_cfg80211_stop() which emits disconnected
even when sme_state was disconnected. This is legacy from the old
staging driver and I can't repoduce the old problem anymore. I assume the
bug got fixed while the driver was cleaned up so let's get
rid of the hack.
This makes it possible to call ath6kl_cfg80211_stop from ath6kl_close()
which happens in a followup patch.
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
This is needed to allow WAPI AP to configure the initial group key
to the target in the same way as is done with TKIP/CCMP. This
fixes broadcast data frame delivery with the initial group key.
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Packet should be force removed when reset/detach
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Without this patch, USB host hub shows error when cable was detached
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
It is possible to judge whether renesas_usbhs driver is running,
by checking attch irq mask.
This patch adds usbhsh_is_running() to check it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
attch interrupt might happen infinitely on some USB hub (self power?).
This patch disable attch irq after device attached,
and enable it again when detach irq happen.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
driver has to re-use the limited pipe for each device/endpoint
when it is USB host hub mode, since number of pipe has limitation.
Then, each pipe should care own pipe sequence for next packet.
This patch adds sequence control.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
driver has to re-use the limited pipe for each device/endpoint
when it is USB host hub mode, since number of pipe has limitation.
This patch adds usbhsh_pipe_attach/detach() functions for it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
This patch adds usbhsh_endpoint_detach_all() for error case.
usbhs_endpoitn_xxx() functions were moved to upper side in source code.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Current renesas_usbhs had been assigning udev to each urb.
It was executed even though it was device0.
For this reason, the device0 had to set the new device address
which has still not been assigned. (it will be assigned on next step).
Current renesas_usbhs used fixed address for it.
but it is not good for USB hub support.
This patch modifies this issue.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Allows a FUSE file-system to tell the kernel when a file or directory is
deleted. If the specified dentry has the specified inode number, the kernel will
unhash it.
The current 'fuse_notify_inval_entry' does not cause the kernel to clean up
directories that are in use properly, and as a result the users of those
directories see incorrect semantics from the file-system. The error condition
seen when 'fuse_notify_inval_entry' is used to notify of a deleted directory is
avoided when 'fuse_notify_delete' is used instead.
The following scenario demonstrates the difference:
1. User A chdirs into 'testdir' and starts reading 'testfile'.
2. User B rm -rf 'testdir'.
3. User B creates 'testdir'.
4. User C chdirs into 'testdir'.
If you run the above within the same machine on any file-system (including fuse
file-systems), there is no problem: user C is able to chdir into the new
testdir. The old testdir is removed from the dentry tree, but still open by user
A.
If operations 2 and 3 are performed via the network such that the fuse
file-system uses one of the notify functions to tell the kernel that the nodes
are gone, then the following error occurs for user C while user A holds the
original directory open:
muirj@empacher:~> ls /test/testdir
ls: cannot access /test/testdir: No such file or directory
The issue here is that the kernel still has a dentry for testdir, and so it is
requesting the attributes for the old directory, while the file-system is
responding that the directory no longer exists.
If on the other hand, if the file-system can notify the kernel that the
directory is deleted using the new 'fuse_notify_delete' function, then the above
ls will find the new directory as expected.
Signed-off-by: John Muir <john@jmuir.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Multiplexing filesystems may want to support ioctls on the underlying
files and directores (e.g. FS_IOC_{GET,SET}FLAGS).
Ioctl support on directories was missing so add it now.
Reported-by: Antonio SJ Musumeci <bile@landofbile.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
The advantage of kcalloc is, that will prevent integer overflows which could
result from the multiplication of number of elements and size and it is also
a bit nicer to read.
The semantic patch that makes this change is available
in https://lkml.org/lkml/2011/11/25/107
Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Use generic_file_llseek() instead of open coding the seek function.
i_mutex protection is only necessary for SEEK_END (and SEEK_HOLE, SEEK_DATA), so
move SEEK_CUR and SEEK_SET out from under i_mutex.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Fix race between lseek(fd, 0, SEEK_CUR) and read/write. This was fixed in
generic code by commit 5b6f1eb97d (vfs: lseek(fd, 0, SEEK_CUR) race condition).
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Modify the algorithm to build the source hashing hash table to add
extra slots for destinations with higher weight. This has the effect
of allowing an IPVS SH user to give more connections to hosts that
have been configured to have a higher weight.
The reason for the Kconfig change is because the size of the hash table
becomes more relevant/important if you decide to use the weights in the
manner this patch lets you. It would be conceivable that someone might
need to increase the size of that table to accommodate their
configuration, so it will be handy to be able to do that through the
regular configuration system instead of editing the source.
Signed-off-by: Michael Maxim <mike@okcupid.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This is not merged with the ipv4 match into xt_rpfilter.c
to avoid ipv6 module dependency issues.
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The test in fuse_file_llseek() "not SEEK_CUR or not SEEK_SET" always evaluates
to true.
This was introduced in 3.1 by commit 06222e49 (fs: handle SEEK_HOLE/SEEK_DATA
properly in all fs's that define their own llseek) and changed the behavior of
SEEK_CUR and SEEK_SET to always retrieve the file attributes. This is a
performance regression.
Fix the test so that it makes sense.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
CC: stable@vger.kernel.org
CC: Josef Bacik <josef@redhat.com>
CC: Al Viro <viro@zeniv.linux.org.uk>
Fix two bugs in fuse_retrieve():
- retrieving more than one page would yield repeated instances of the
first page
- if more than FUSE_MAX_PAGES_PER_REQ pages were requested than the
request page array would overflow
fuse_retrieve() was added in 2.6.36 and these bugs had been there since the
beginning.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
CC: stable@vger.kernel.org
Place reinclusion guards on linux/cuda.h otherwise the UAPI splitter script
won't insert a #include to make the kernel header include the UAPI header.
Signed-off-by: David Howells <dhowells@redhat.com>
Place reinclusion guards on linux/pmu.h otherwise the UAPI splitter won't
insert the #include to include the UAPI header from the kernel header.
Signed-off-by: David Howells <dhowells@redhat.com>
Place reinclusion guards on linux/isdn_divertif.h otherwise the UAPI splitter
script won't insert the #include to include the UAPI header from the kernel
header.
Signed-off-by: David Howells <dhowells@redhat.com>
Place reinclusion guards on linux/sound.h otherwise the UAPI splitter script
won't insert a #include to make the kernel header include the UAPI header.
Signed-off-by: David Howells <dhowells@redhat.com>
Rearrange the definition of HZ in asm-generic/param.h so that the user-specific
is declared before the kernel-specific one. We then explicitly #undef the
userspace HZ value and replace it with the kernel HZ value.
This allows the userspace params to be excised into a separate header as part
of the UAPI header split.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
This may lead to problems (like loss of sound) as GPIO pin may be used
for different function (SPDIF OUT, EAPD etc) on those systems. This patch
disables default mute LED GPIO configuration on all new codecs as all new
HP systems are expected to provide explicit mute LED configuration in SMBIOS.
Signed-off-by: Vitaliy Kulikov <Vitaliy.Kulikov@idt.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch changes the kprobes implementation to use the generic ARM
instruction set condition code checks, rather than a dedicated
implementation.
Signed-off-by: Leif Lindholm <leif.lindholm@arm.com>
Acked-by: Jon Medhurst <tixy@yxit.co.uk>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This patch fixes two separate issues with the SWP emulation handler:
1: Certain processors implementing ARMv7-A can (legally) take an
undef exception even when the condition code would have meant that
the instruction should not have been executed.
2: Opcodes with all flags set (condition code = 0xf) have been reused
in recent, and not-so-recent, versions of the ARM architecture to
implement unconditional extensions to the instruction set. The
existing code would still have processed any undefs triggered by
executing an opcode with such a value.
This patch uses the new generic ARM instruction set condition code
checks to implement proper handling of these situations.
Signed-off-by: Leif Lindholm <leif.lindholm@arm.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This patch changes the nwfpe implementation to use the new generic
ARM instruction set condition code checks, rather than a local
implementation. It also removes the existing condition code checking,
which has been used for the generic support (in kernel/opcodes.{ch}).
This code has not been tested beyond building, linking and booting.
Signed-off-by: Leif Lindholm <leif.lindholm@arm.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This patch breaks the ARM condition checking code out of nwfpe/fpopcode.{ch}
into a standalone file for opcode operations. It also modifies the code
somewhat for coding style adherence, and adds some temporary variables for
increased readability.
Signed-off-by: Leif Lindholm <leif.lindholm@arm.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Some Integrator core modules have TCM memory, so let's turn it on
if it's there.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
The Integrator AP/CP can have a varying set of core modules, some
(like ARM920T) are so old that trying to read the TCM status register
with CP15 will make them hang. So we need to make sure that we are
running on v5 or later in order to be able to activate this for
the Integrator. (The Integrator with CM926EJ-S has 32+32 kb of TCM
memory.)
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Move the sizing of NR_BANKS to a Kconfig control instead of selecting
it in a header file depending on platform selection. This allows new
additions to its dependencies to be handled more gracefully.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Exactly like roundup_pow_of_two(1), the rounddown version was buggy for
the case of a compile-time constant '1' argument. Probably because it
originated from the same code, sharing history with the roundup version
from before the bugfix (for that one, see commit 1a06a52ee1: "Fix
roundup_pow_of_two(1)").
However, unlike the roundup version, the fix for rounddown is to just
remove the broken special case entirely. It's simply not needed - the
generic code
1UL << ilog2(n)
does the right thing for the constant '1' argment too. The only reason
roundup needed that special case was because rounding up does so by
subtracting one from the argument (and then adding one to the result)
causing the obvious problems with "ilog2(0)".
But rounddown doesn't do any of that, since ilog2() naturally truncates
(ie "rounds down") to the right rounded down value. And without the
ilog2(0) case, there's no reason for the special case that had the wrong
value.
tl;dr: rounddown_pow_of_two(1) should be 1, not 0.
Acked-by: Dmitry Torokhov <dtor@vmware.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Move the initialization regcache related fields of the regmap struct to
regcache_init. This allows us to keep regmap and regcache code better
separated.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc:
mmc: core: Fix deadlock when the CONFIG_MMC_UNSAFE_RESUME is not defined
mmc: sdhci-s3c: Remove old and misprototyped suspend operations
mmc: tmio: fix clock gating on platforms with a .set_pwr() method
mmc: sh_mmcif: fix clock gating on platforms with a .down_pwr() method
mmc: core: Fix typo at mmc_card_sleep
mmc: core: Fix power_off_notify during suspend
mmc: core: Fix setting power notify state variable for non-eMMC
mmc: core: Add quirk for long data read time
mmc: Add module.h include to sdhci-cns3xxx.c
mmc: mxcmmc: fix falling back to PIO
mmc: omap_hsmmc: DMA unmap only once in case of MMC error
/proc/mounts was showing the mount option [no]init_inode_table when
the correct mount option that will be accepted by parse_options() is
[no]init_itable.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@kernel.org
