Commit graph

299,176 commits

Author SHA1 Message Date
Dan Carpenter
35b09c9bf6 drm/i915: fix if statement (bogus semi-colon)
The semi-colon is a typo here and it makes the if statement
unconditional.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
2011-11-08 10:50:18 +00:00
Mark Brown
41966710ab Merge branch 'for-3.2' into for-3.3 2011-11-08 10:47:46 +00:00
Mark Brown
1dd6c0770d Merge branch 'for-3.2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-3.2 2011-11-08 10:37:41 +00:00
Michael Krufky
8c8ee11345 [media] tda18271: add tda18271_get_if_frequency
Reported-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-11-08 08:25:15 -02:00
Michael Krufky
d697b4ce94 [media] mxl5007t: add mxl5007t_get_if_frequency
Reported-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-11-08 08:24:13 -02:00
Michael Krufky
f7901f9b4a [media] mxl111sf: add mxl111sf_tuner_get_if_frequency
Reported-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-11-08 08:23:22 -02:00
Archit Taneja
b923d40dd4 ARM: OMAP2PLUS: DSS: Ensure DSS works correctly if display is enabled in bootloader
Resetting DISPC when a DISPC output is enabled causes the DSS to go into an
inconsistent state. Thus if the bootloader has enabled a display, the hwmod code
cannot reset the DISPC module just like that, but the outputs need to be
disabled first.

Add function dispc_disable_outputs() which disables all active overlay manager
and ensure all frame transfers are completed.

Modify omap_dss_reset() to call this function and clear DSS_CONTROL,
DSS_SDI_CONTROL and DSS_PLL_CONTROL so that DSS is in a clean state when the
DSS2 driver starts.

This resolves the hang issue(caused by a L3 error during boot) seen on the
beagle board C3, which has a factory bootloader that enables display. The issue
is resolved with this patch.

Thanks to Tomi and Sricharan for some additional testing.

Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: R, Sricharan <r.sricharan@ti.com>
Signed-off-by: Archit Taneja <archit@ti.com>
[paul@pwsan.com: restructured code, removed omap_{read,write}l(), removed
 cpu_is_omap*() calls and converted to dev_attr]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-11-08 03:16:46 -07:00
Tomi Valkeinen
13662dc5b1 ARM: OMAP: HWMOD: Unify DSS resets for OMAPs
This patch adds a custom DSS reset function used on OMAPs from OMAP2
forward.

The function doesn't actually do a reset, it only waits for the reset to
complete. The reason for this is that on OMAP4 there is no possibility
to do a SW reset, and on OMAP2/3 doing a SW reset for dss_core resets
all the other DSS modules also, thus breaking the HWMOD model where
every DSS module is handled independently.

This fixes the problem with DSS reset on OMAP4, caused by the fact that
because there's no SW reset for dss_core on OMAP4, the HWMOD framework
doesn't try to reset dss_core and thus the DSS clocks were never enabled
at the same time. This causes causes the HWMOD reset to fail for
dss_dispc and dss_rfbi.

The common reset function will also allow us to fix another problem in
the future: before doing a reset we need to disable DSS outputs, which
are in some cases enabled by the bootloader, as otherwise DSS HW seems
to get more or less stuck, requiring a power reset to recover.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
[paul@pwsan.com: modified to build arch/arm/mach-omap2/display.o
 unconditionally to avoid an error when !CONFIG_OMAP2_DSS]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-11-08 03:16:13 -07:00
Tomi Valkeinen
3ce32676bb ARM: OMAP2/3: HWMOD: Add SYSS_HAS_RESET_STATUS for dss
OMAP2/3 dss_core has a reset status flag in sysstatus register. Add
SYSS_HAS_RESET_STATUS flag to HWMOD data so it can be used.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-11-08 03:16:12 -07:00
Tomi Valkeinen
4d0698d98f ARM: OMAP4: HWMOD: fix DSS clock data
The OMAP4 HWMOD data currently contains errors with DSS clocks:

dss_hdmi and dss_venc have their main_clks wrong. The clocks should be
dss_48mhz_clk and dss_tv_clk, respectively.

These problems were temporarily fixed with the DSS patches
9ede365aa6 ("HACK: OMAP: DSS2: clk hack
for OMAP2/3"), and df5d3ed23c ("OMAP:
DSS2: HDMI: fix hdmi clock name"), which can be reverted after this
patch.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-11-08 03:16:12 -07:00
Tomi Valkeinen
37ad085527 ARM: OMAP4: HWMOD: Add HWMOD_CONTROL_OPT_CLKS_IN_RESET for dss_core
DSS needs all DSS clocks to be enabled to be able to finish reset
properly. Before v3.1-rc1 the omapdss driver was managing clocks and
resets correctly. However, when omapdss started using runtime PM at
v3.1-rc1, the responsibility for the reset moved to HWMOD framework.

HWMOD framework does not currently enable all the DSS clocks when
resetting the DSS hardware. This causes the HWMOD frameworks boot-time
reset to fail, possibly leaving the DSS hardware in undefined state.

This patch sets HWMOD_CONTROL_OPT_CLKS_IN_RESET for dss_core. The flag
is actually not used on OMAP4, because dss_core hardware does not have
soft-reset functionality and thus the HWMOD framework never resets nor
waits for the reset to finish.

However, while the flag is not strictly needed currently, I think it
represents the HW correctly: all the DSS clocks should be enabled after
power-on to allow DSS hardware to finish its reset.

A custom reset function will be added in the following patches which
manages this correctly for OMAP4.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-11-08 03:16:11 -07:00
Tomi Valkeinen
4247878efc ARM: OMAP4: HWMOD: remove extra clocks
Remove the dss_dss_clk from dss_core's opt-clocks. dss_dss_clk already
defined as the dss main_clk, and thus is not needed as an opt-clock.

Remove opt-clocks for dss_dispc, as dispc only uses the main_clk.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-11-08 03:16:11 -07:00
Tomi Valkeinen
6c3d7e34d6 ARM: OMAP3: HWMOD: fix DSS clock data
The OMAP3 HWMOD data currently contains these errors with DSS clocks:

- dss_rfbi is missing ick opt-clock, which is needed for RFBI to
  calculate timings

- dss_dsi is missing ick and sys_clk

- dss_venc is missing dss_96m_fck opt-clock, which is required on
  OMAP3430

- dss_venc's interface and main clocks are wrong, causing VENC to fail
  to start

These problems were temporarily fixed with a DSS patch
9ede365aa6 ("HACK: OMAP: DSS2: clk hack
for OMAP2/3"), which can be reverted after this patch (and the similar
patches for other OMAPs).

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-11-08 03:16:10 -07:00
Tomi Valkeinen
8c3105ca1a ARM: OMAP3: HWMOD: Fix DSS reset
DSS needs all DSS clocks to be enabled to be able to finish reset
properly. Before v3.1-rc1 the omapdss driver was managing clocks and
resets correctly. However, when omapdss started using runtime PM at
v3.1-rc1, the responsibility for the reset moved to HWMOD framework.

HWMOD framework does not currently enable all the DSS clocks when
resetting the DSS hardware. This hasn't caused any problems so far, but
we may just have been lucky.

dss_core's opt-clocks is also missing dss_96m_fck, which is a DSS clock
present only on OMAP3430, and thus required on OMAP3430 to finish the
reset.

This patch sets HWMOD_CONTROL_OPT_CLKS_IN_RESET and adds the dss_96m_fck
opt-clock for dss_core in OMAP3 HWMOD data, fixing the issue.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
[paul@pwsan.com: merged duplicate .flags fields]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-11-08 03:16:10 -07:00
Tomi Valkeinen
b8ac10d8b7 ARM: OMAP2xxx: HWMOD: fix DSS clock data
The OMAP2xxx HWMOD data currently contains two errors with DSS clocks:

- dss_rfbi is missing ick opt-clock, which is needed for RFBI to
  calculate timings

- dss_venc's interface and main clocks are wrong, causing VENC to fail
  to start

These problems were temporarily fixed with a DSS patch
9ede365aa6 ("HACK: OMAP: DSS2: clk hack
for OMAP2/3"), which can be reverted after this patch (and the similar
patches for other OMAPs).

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-11-08 03:16:09 -07:00
Tomi Valkeinen
1258ea596f ARM: OMAP2xxx: HWMOD: Fix DSS reset
DSS needs all DSS clocks to be enabled to be able to finish reset
properly. Before v3.1-rc1 the omapdss driver was managing clocks and
resets correctly. However, when omapdss started using runtime PM at
v3.1-rc1, the responsibility for the reset moved to HWMOD framework.

HWMOD framework does not currently enable all the DSS clocks when
resetting the DSS hardware. This hasn't caused any problems so far, but
we may just have been lucky.

This patch sets HWMOD_CONTROL_OPT_CLKS_IN_RESET for dss_core in OMAP2xxx
HWMOD data, fixing the issue.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
[paul@pwsan.com: merged duplicate .flags fields]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-11-08 03:16:09 -07:00
Bob Peterson
dfe4d34b39 GFS2: Add readahead to sequential directory traversal
This patch adds read-ahead capability to GFS2's
directory hash table management.  It greatly improves
performance for some directory operations.  For example:
In one of my file systems that has 1000 directories, each
of which has 1000 files, time to execute a recursive
ls (time ls -fR /mnt/gfs2 > /dev/null) was reduced
from 2m2.814s on a stock kernel to 0m45.938s.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-11-08 09:52:12 +00:00
Steven Whitehouse
20ed0535d3 GFS2: Fix up REQ flags
Christoph has split up REQ_PRIO from REQ_META. That means that
we can drop REQ_PRIO from places where is it not needed. I'm
not at all sure that the combination WRITE_FLUSH_FUA | REQ_PRIO
makes any kind of sense, anyway.

In addition, I've added REQ_META to one place in the code where
it was missing. REQ_PRIO has been left for read/writes triggered
by glock acquisition and writeback only. We can adjust it again
if required, but these are the most important points from a
performance perspective.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
2011-11-08 09:51:53 +00:00
Paul Bolle
830d7f5e8d Doc: 53c700: drop never defined (Kconfig) macros
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-11-08 10:24:15 +01:00
Paul Bolle
e7cbb5b569 Doc: cpufreq: Fix typo and outdated line
'sampling_rate_max' was removed with commit ef598549 ("[...] Remove
deprecated sysfs file sampling_rate_max"), so its line can be dropped
from governors.txt. And 'show_sampling_rate_min' is a typo: the sysfs
file is called 'sampling_rate_min'.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-11-08 10:23:29 +01:00
Takashi Iwai
5c0ebfbe56 ALSA: hda/realtek - Rewrite ALC882 model=vaio-tt with auto-parser
Providing a pincfg fix for VAIO-TT with ALC889 codec to work with the
auto-parser, and drop the static configuration.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-08 08:59:37 +01:00
Takashi Iwai
42399f7a71 ALSA: hda/realtek - Remove all ALC262-quirk codes
Now that model=ultra is supported well by the auto-parser, we can get rid
of the whole alc262_quirks.c and its related codes.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-08 08:59:36 +01:00
Takashi Iwai
24de183ed0 ALSA: hda/realtek - Add the support of shared HP/Mic
A machine like Q1-ultra which has only a single HP but no mic-jack, we
can re-task the headhpone as an external mic jack.  This was done formerly
in ALC262 model=ultra quirk, and now the auto-parser supports this mode.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-08 08:59:36 +01:00
Takashi Iwai
82e14a4754 ALSA: hda/realtek - Drop ALC262 model=basic static configs
Now most of ALC262 stuff has been moved to the auto-parser, and no longer
need for keeping model=basic.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-08 08:59:36 +01:00
Takashi Iwai
46900b5c55 ALSA: hda/realtek - Drop ALC262 model=hippo static quirks
Both entries for ALC262 model=hippo work well with the auto-parser and
the default BIOS setup.  No static configs are needed, so drop them.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-08 08:59:36 +01:00
Takashi Iwai
6fb9c82c47 ALSA: hda/realtek - Drop ALC262 model=hippo static quirks
This model (actually BenQ Joybook) works fine with the default auto-parser
and the BIOS setup.  Just drop the static quirks.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-08 08:59:35 +01:00
Takashi Iwai
3dcd3be330 ALSA: hda/realtek - Convert ALC262 model=fujitsu to auto-parser
It works well with the auto-parse and the default BIOS setup when an
additional COEF setup (for benq) is used.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-08 08:59:35 +01:00
Takashi Iwai
b42590b865 ALSA: hda/realtek - Convert ALC262 benq and benq-t31 to fixup-lists
The conversion from ALC262 model=benq and model=benq-t31 static configs
to auto-parser requires the manual COEF setups for corresponding models.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-08 08:59:35 +01:00
Takashi Iwai
c470150c53 ALSA: hda/realtek - Convert ALC262 lenovo-3000 quirks to fixup-list
The static quirks for ALC262 Lenovo 3000 can be covered by the auto-
parser with a fixup of the mic-pin to VREF50 and the additional COEF
verb.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-08 08:59:35 +01:00
Takashi Iwai
80f6b77366 ALSA: hda/realtek - Drop ALC262 model=nec quirk
This laptop works also fine with the auto-parser and the BIOS setup.
A good boy.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-08 08:59:35 +01:00
Takashi Iwai
ee0eb25119 ALSA: hda/realtek - Drop ALC262 model=toshiba-s06
This laptop works fine with the current auto-parser and the BIOS setup,
so let's drop the static configuration.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-08 08:59:34 +01:00
Takashi Iwai
12837c983d ALSA: hda/realtek - Convert ALC262 model=toshiba-rx1 to a fixup-list
Use the auto-parser for ALC262 model=toshiba-rx1 with the fixed pin-
configs.  The BIOS table seems incorrect, so many pin entries are
overwritten to match with the former quirk.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-08 08:59:34 +01:00
Takashi Iwai
ea4e7af122 ALSA: hda/realtek - Convert alc262 model=tyan to a fixup-list
Use the auto-parser for ALC262 model=tyan with a pin-config fix-up and
drop the static configuration.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-08 08:59:34 +01:00
Axel Lin
fdcb23634c hwspinlock/u8500: fix build error due to undefined label
Fix below build error:

  CC      drivers/hwspinlock/u8500_hsem.o
drivers/hwspinlock/u8500_hsem.c: In function 'u8500_hsem_probe':
drivers/hwspinlock/u8500_hsem.c:113: error: label 'free_state' used but not defined

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2011-11-08 09:28:41 +02:00
Axel Lin
816af3bb50 hwspinlock: Don't return a value in __hwspin_unlock
Fix below build warning:

  CC      arch/arm/mach-omap2/hwspinlock.o
In file included from arch/arm/mach-omap2/hwspinlock.c:22:
include/linux/hwspinlock.h: In function '__hwspin_unlock':
include/linux/hwspinlock.h:121: warning: 'return' with a value, in function returning void

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2011-11-08 09:28:27 +02:00
Takashi Iwai
dccc1810f4 ALSA: hda - Mute unused capture sources for Realtek codecs
When a Realtek codec has a matrix-style capture-source selection, we
need to scan all connections instead of only imux items.  Otherwise some
input might be kept unmuted.  Although the corresponding input must be
dead so there should be no input from it, it's still safer to mute the
route completely.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-08 07:52:19 +01:00
Denis V. Lunev
5a9a51799b ALSA: intel8x0: Improve comments for VM optimization
The recently merged 228cf79376 looks a bit hackish while it is not.
The change was quite simple. In a virtualized environment the
patch unhacks old kludge introduced for old broken AC97 hardware.

This patch adds proper comment to "unkludge" code.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Konstantin Ozerkov <kozerkov@parallels.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-08 07:51:21 +01:00
Seth Forshee
7cf801cfc0 Input: ALPS - add documentation for protocol versions 3 and 4
Also converts from using "old" and "new" to describe the already-known
protocols to using "version 1" and "version 2" to match the code.

Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Acked-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-11-07 22:22:12 -08:00
Seth Forshee
01ce661fc8 Input: ALPS - add semi-MT support for v3 protocol
Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Acked-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-11-07 22:22:11 -08:00
Seth Forshee
25bded7cd6 Input: ALPS - add support for protocol versions 3 and 4
This patch adds support for two ALPS touchpad protocols not
supported currently by the driver, which I am arbitrarily naming
version 3 and version 4. Support is single-touch only at this time,
although both protocols are capable of limited multitouch support.

Thanks to Andrew Skalski, who did the initial reverse-engineering
of the v3 protocol.

Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Acked-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-11-07 22:22:11 -08:00
Seth Forshee
b46615fe92 Input: ALPS - remove assumptions about packet size
In preparation for version 4 protocol support, which has 8-byte
data packets, remove all hard-coded assumptions about packet size
and use psmouse->pktsize instead.

Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Acked-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-11-07 22:22:10 -08:00
Seth Forshee
fa629ef522 Input: ALPS - add protocol version field in alps_model_info
In preparation for adding support for more ALPS protocol versions,
add a field for the protocol version to the model info instead of
using a field in the flags. OLDPROTO and !OLDPROTO are now called
version 1 and version 2, repsectively.

Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Acked-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-11-07 22:22:10 -08:00
Seth Forshee
d4b347b29b Input: ALPS - move protocol information to Documentation
In preparation for new protocol support, move the protocol
information currently documented in alps.c to
Documentation/input/alps.txt, where it can be expanded without
cluttering up the driver.

Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Acked-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-11-07 22:22:09 -08:00
Dan Williams
257a4b42af md/raid5: STRIPE_ACTIVE has lock semantics, add barriers
All updates that occur under STRIPE_ACTIVE should be globally visible
when STRIPE_ACTIVE clears.  test_and_set_bit() implies a barrier, but
clear_bit() does not.

This is suitable for 3.1-stable.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Cc: stable@kernel.org
2011-11-08 16:22:06 +11:00
NeilBrown
9a3f530f39 md/raid5: abort any pending parity operations when array fails.
When the number of failed devices exceeds the allowed number
we must abort any active parity operations (checks or updates) as they
are no longer meaningful, and can lead to a BUG_ON in
handle_parity_checks6.

This bug was introduce by commit 6c0069c0ae
in 2.6.29.

Reported-by: Manish Katiyar <mkatiyar@gmail.com>
Tested-by: Manish Katiyar <mkatiyar@gmail.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Cc: stable@kernel.org
2011-11-08 16:22:01 +11:00
Alexander Graf
5ccf55dd81 powerpc/kvm: Fix build failure with HV KVM and CBE
When running with HV KVM and CBE config options enabled, I get
build failures like the following:

  arch/powerpc/kernel/head_64.o: In function `cbe_system_error_hv':
  (.text+0x1228): undefined reference to `do_kvm_0x1202'
  arch/powerpc/kernel/head_64.o: In function `cbe_maintenance_hv':
  (.text+0x1628): undefined reference to `do_kvm_0x1602'
  arch/powerpc/kernel/head_64.o: In function `cbe_thermal_hv':
  (.text+0x1828): undefined reference to `do_kvm_0x1802'

This is because we jump to a KVM handler when HV is enabled, but we
only generate the handler with PR KVM mode.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-11-08 15:34:04 +11:00
Chris Bagwell
5a6c865d98 Input: wacom - ignore unwanted bamboo packets
Bamboo's Pen and Touch packets always start with a value
of 0x02 in first byte.  In 3rd gen Bamboo's, the hw is now
periodically sending some additional packets with unrelated data
and uses a value other than 0x02 to inform driver this.

Ignore those packets now.

This was reported by users as bad behavior in Gimp. The
invalid packets being processed made the stylus report
out of proximity for the 1 packet and this triggered some
secondary bug which caused Gimp to stop drawing until
user really took pen out of proximity of tablet.

Signed-off-by: Chris Bagwell <chris@cnpbagwell.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-11-07 19:56:41 -08:00
Benjamin Herrenschmidt
f81f5e14de Merge remote-tracking branch 'agust/next' into merge 2011-11-08 14:53:55 +11:00
Geoff Levand
9fce85f7ff powerpc/ps3: Fix lv1_gpu_attribute hcall
The lv1_gpu_attribute hcall takes three, not five input
arguments.  Adjust the lv1 hcall table and all calls.

Signed-off-by: Geoff Levand <geoff@infradead.org>
CC: Takashi Iwai <tiwai@suse.de>
Acked-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-11-08 14:51:59 +11:00
Geoff Levand
5233e26ebb powerpc/ps3: Fix PS3 repository build warnings
Fix uninitialized variable warnings in build of repository.c

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-11-08 14:51:58 +11:00