Commit graph

299,176 commits

Author SHA1 Message Date
Eric Dumazet
6a32e4f9dd vlan: allow nested vlan_do_receive()
commit 2425717b27 (net: allow vlan traffic to be received under bond)
broke ARP processing on vlan on top of bonding.

       +-------+
eth0 --| bond0 |---bond0.103
eth1 --|       |
       +-------+

52870.115435: skb_gro_reset_offset <-napi_gro_receive
52870.115435: dev_gro_receive <-napi_gro_receive
52870.115435: napi_skb_finish <-napi_gro_receive
52870.115435: netif_receive_skb <-napi_skb_finish
52870.115435: get_rps_cpu <-netif_receive_skb
52870.115435: __netif_receive_skb <-netif_receive_skb
52870.115436: vlan_do_receive <-__netif_receive_skb
52870.115436: bond_handle_frame <-__netif_receive_skb
52870.115436: vlan_do_receive <-__netif_receive_skb
52870.115436: arp_rcv <-__netif_receive_skb
52870.115436: kfree_skb <-arp_rcv

Packet is dropped in arp_rcv() because its pkt_type was set to
PACKET_OTHERHOST in the first vlan_do_receive() call, since no eth0.103
exists.

We really need to change pkt_type only if no more rx_handler is about to
be called for the packet.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Reviewed-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-30 04:43:30 -04:00
nagalakshmi.nandigama@lsi.com
921cd8024b [SCSI] mpt2sas: New feature - Fast Load Support
New feature Fast Load Support.

(1)Asynchronous SCSI scanning: This will allow the drivers to scan
for devices in parallel while other device drivers are loading at
the same time. This will improve the amount of time it takes for the
OS to load.

(2) Reporting Devices while port enable is active: This feature will
allow devices to be reported to OS immediately while port enable is
active. The previous implementation waits for port enable to complete,
and then report devices. This feature is only enabled on IT firmware
configurations when there are no boot device configured in BIOS Configuration
Utility, else the driver will wait till port enable completes reporting
devices. For IR firmware, this feature is turned off. This feature is to
address large SAS topologies (>100 drives) when the boot OS is using onboard
SATA device, in other words, the boot devices is not
connected to our controller.

(3) Scanning for devices after diagnostic reset completes: A new routine
_scsih_scan_start is added. This will scan the expander pages, IR pages,
and sas device pages, then reporting new devices to SCSI Mid layer. It
seems the driver is not supporting adding devices while diagnostic reset
is active. Apparently this is due to the sanity checks on
ioc->shost_recovery flag throughout the context of kernel work thread FIFO,
and the mpt2sas_fw_work.

Signed-off-by: Nagalakshmi Nandigama <nagalakshmi.nandigama@lsi.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-30 12:35:57 +04:00
nagalakshmi.nandigama@lsi.com
f9d979ce10 [SCSI] mpt2sas: MPI next revision header update
1)Added ProxyVF_ID field to Configuration Request message.
2)Added IO Unit Page 8, IO Unit Page 9,and IO Unit Page 10.
3)Added SASNotifyPrimitiveMasks field to IOC Page 7.
4)Added SAS NOTIFY Primitive event.
5)Added Temperature Threshold Event.
6)Added Host Message Event.
7)Added Send Host Message request and reply.

Signed-off-by: Nagalakshmi Nandigama <nagalakshmi.nandigama@lsi.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-30 12:30:52 +04:00
Andreas Hofmeister
14ef37b6d0 ipv6: fix route lookup in addrconf_prefix_rcv()
The route lookup to find a previously auto-configured route for a prefixes used
to use rt6_lookup(), with the prefix from the RA used as an address. However,
that kind of lookup ignores routing tables, the prefix length and route flags,
so when there were other matching routes, even in different tables and/or with
a different prefix length, the wrong route would be manipulated.

Now, a new function "addrconf_get_prefix_route()" is used for the route lookup,
which searches in RT6_TABLE_PREFIX and takes the prefix-length and route flags
into account.

Signed-off-by: Andreas Hofmeister <andi@collax.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-30 04:12:36 -04:00
Jay Vosburgh
e6d265e850 bonding: eliminate bond_close race conditions
This patch resolves two sets of race conditions.

	Mitsuo Hayasaka <mitsuo.hayasaka.hu@hitachi.com> reported the
first, as follows:

The bond_close() calls cancel_delayed_work() to cancel delayed works.
It, however, cannot cancel works that were already queued in workqueue.
The bond_open() initializes work->data, and proccess_one_work() refers
get_work_cwq(work)->wq->flags. The get_work_cwq() returns NULL when
work->data has been initialized. Thus, a panic occurs.

	He included a patch that converted the cancel_delayed_work calls
in bond_close to flush_delayed_work_sync, which eliminated the above
problem.

	His patch is incorporated, at least in principle, into this
patch.  In this patch, we use cancel_delayed_work_sync in place of
flush_delayed_work_sync, and also convert bond_uninit in addition to
bond_close.

	This conversion to _sync, however, opens new races between
bond_close and three periodically executing workqueue functions:
bond_mii_monitor, bond_alb_monitor and bond_activebackup_arp_mon.

	The race occurs because bond_close and bond_uninit are always
called with RTNL held, and these workqueue functions may acquire RTNL to
perform failover-related activities.  If bond_close or bond_uninit is
waiting in cancel_delayed_work_sync, deadlock occurs.

	These deadlocks are resolved by having the workqueue functions
acquire RTNL conditionally.  If the rtnl_trylock() fails, the functions
reschedule and return immediately.  For the cases that are attempting to
perform link failover, a delay of 1 is used; for the other cases, the
normal interval is used (as those activities are not as time critical).

	Additionally, the bond_mii_monitor function now stores the delay
in a variable (mimicing the structure of activebackup_arp_mon).

	Lastly, all of the above renders the kill_timers sentinel moot,
and therefore it has been removed.

Tested-by: Mitsuo Hayasaka <mitsuo.hayasaka.hu@hitachi.com>
Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-30 03:13:14 -04:00
Sucheta Chakraborty
10ee0faed9 qlcnic: fix beacon and LED test.
o Updated version number to 5.0.25

o Do not hold onto RESETTING_BIT for entire duration of LED/ beacon test.
  Instead, just checking for RESETTING_BIT not set before sending config_led
  command down to card.

o Take rtnl_lock instead of RESETTING_BIT for beacon test while sending
  config_led command down to make sure interface cannot be brought up/ down.

o Allocate and free resources if interface is down before
  sending the config_led command. This is to make sure config_led
  command sending doesn't fail.

o Clear QLCNIC_LED_ENABLE bit if beacon/ LED test fails to start.

Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-30 03:09:41 -04:00
Sritej Velaga
445b62dfd9 qlcnic: Updated License file
Updated qlcnic's license file.

Signed-off-by: Sritej Velaga <sritej.velaga@qlogic.com>
Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-30 03:09:40 -04:00
Sony Chacko
68233c583a qlcnic: updated reset sequence
Signed-off-by: Sony Chacko <sony.chacko@qlogic.com>
Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-30 03:09:40 -04:00
Sucheta Chakraborty
ad567b8f1d qlcnic: reset loopback mode if promiscous mode setting fails.
If promiscous mode setting fails, reset loopback mode setting in firmware.

Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-30 03:09:40 -04:00
Sritej Velaga
16e3cf73be qlcnic: skip IDC ack check in fw reset path.
In fw reset path, we should consider any change in device state as an
ack from the other driver. When that happens, we don't have to wait for
an explicit ack.

Signed-off-by: Sritej Velaga <sritej.velaga@qlogic.com>
Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-30 03:09:39 -04:00
David S. Miller
9eeebb5bc8 Merge branch 'batman-adv/maint' of git://git.open-mesh.org/linux-merge 2011-10-30 03:05:07 -04:00
Shirish Pargaonkar
9ef5992e44 cifs: Assume passwords are encoded according to iocharset (try #2)
Re-posting a patch originally posted by Oskar Liljeblad after
rebasing on 3.2.

Modify cifs to assume that the supplied password is encoded according
to iocharset.  Before this patch passwords would be treated as
raw 8-bit data, which made authentication with Unicode passwords impossible
(at least passwords with characters > 0xFF).

The previous code would as a side effect accept passwords encoded with
ISO 8859-1, since Unicode < 0x100 basically is ISO 8859-1.  Software which
relies on that will no longer support password chars > 0x7F unless it also
uses iocharset=iso8859-1.  (mount.cifs does not care about the encoding so
it will work as expected.)

Signed-off-by: Oskar Liljeblad <oskar@osk.mine.nu>
Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru>
Tested-by: A <nimbus1_03087@yahoo.com>
Signed-off-by: Steve French <smfrench@gmail.com>
2011-10-29 22:06:54 -05:00
Pavel Shilovsky
5079276066 CIFS: Fix the VFS brlock cache usage in posix locking case
Request to the cache in FL_POSIX case only.

Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
2011-10-29 22:03:14 -05:00
Javi Merino
6d21af4f7d irq: Fix comment typo ist->is
Signed-off-by: Javi Merino <javi.merino@arm.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-10-29 21:35:00 +02:00
Paul Bolle
ff5f483f30 powerpc: 4xx: remove commented out Kconfig entries
These Kconfig entries have been commented out ever since commit f6557331
("[...] Re-organize Kconfig code for 4xx in arch/powerpc"). There's no
indication why they're commented out. It looks like they're just "old,
unused [...] config options" that were not removed, as other entries
were in that commit, but only commented out. They might as well be
removed now.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-10-29 21:32:55 +02:00
Kyle Manna
fb6c721b69 Input: tca8418_keypad - initial driver release
This driver has been tested with hardware and works as expected.  To use
it add the platform data as appropriate and register it with the
corresponding I2C bus.

Signed-off-by: Kyle Manna <kyle.manna@fuel7.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-10-29 12:32:24 -07:00
Paul Bolle
d593b5413d snd-aoa: remove commented out Kconfig entry
config SND_AOA_TOPAZ has been commented out since it was added five
years ago with commit f3d9478b ("[...] add snd-aoa"). There's no
indication why it's commented out. It might as well be removed.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-10-29 21:31:59 +02:00
Paul Bolle
3007c48a6a treewide: remove commented out Kconfig entries
These Kconfig entries have been commented out since (at least)
v2.6.12-rc2 (the first commit of the git repository). There's no
indication why they're commented out. They might as well be removed.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-10-29 21:31:21 +02:00
Arvind R
6099e419ae edac:i82975x fix 32bit compile and cleanup
the clean up achieves:
  1. fix warning on 32-bit compile
  2. reorder info extraction for clarity
  3. add error-trap diagnostic message
  4. handle ALL modes of memory configurations

Signed-off-by: Arvind R. <arvino55@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-10-29 21:29:42 +02:00
Paul Bolle
800100afc7 h8300: drivers/serial/Kconfig was moved
commit ab4382d274 moved
drivers/serial/Kconfig to drivers/tty/serial/Kconfig, so we need to
source the latter file.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-10-29 21:26:14 +02:00
Kautuk Consul
a127e2d518 namespace: mnt_want_write: Remove unused label 'out'
I was studying the code and I saw that the out label is not being used
at all so I removed it and its usage from the function.

Signed-off-by: Kautuk Consul <consul.kautuk@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-10-29 21:22:14 +02:00
Michael Witten
435a95c5c8 Docs: Kconfig: CORDIC description
This is just some copyediting.

Signed-off-by: Michael Witten <mfwitten@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-10-29 21:20:36 +02:00
Michael Witten
c620846967 Docs: wording: Insert `the'
Signed-off-by: Michael Witten <mfwitten@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-10-29 21:20:22 +02:00
Michael Witten
d89ce936b4 Docs: wording: functions -> algorithm
The code seems to provide a single function that implements the
CORDIC algorithm.

Signed-off-by: Michael Witten <mfwitten@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-10-29 21:20:22 +02:00
Michael Witten
0314322d13 Docs: Pedantry: [Cc]ordic -> CORDIC
According to:

  http://en.wikipedia.org/wiki/CORDIC

it stands for:

  *CO*ordinate *R*otation *DI*gital *C*omputer

Signed-off-by: Michael Witten <mfwitten@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-10-29 21:20:21 +02:00
Paul Menzel
0f60be20ca scripts/package/Makefile: Fix typo: an deb -> a deb
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-10-29 21:15:07 +02:00
Tomoya MORINAGA
2b24628327 spi-topcliff-pch: Change company name OKI SEMICONDUCTOR to LAPIS Semiconductor
On October 1 in 2011,
OKI SEMICONDUCTOR Co., Ltd. changed the company name in to LAPIS Semiconductor Co., Ltd.

Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.lapis-semi.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-10-29 17:02:31 +02:00
Tomoya MORINAGA
92b3a5c1bc spi-topcliff-pch: Support new device LAPIS Semiconductor ML7831 IOH
ML7831 is companion chip for Intel Atom E6xx series.

Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.lapis-semi.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-10-29 17:02:31 +02:00
Linus Torvalds
ce949717b5 Merge git://github.com/rustyrussell/linux
* git://github.com/rustyrussell/linux:
  lguest: move process freezing before pending signals check
  lguest: don't allow KVM-detection cpuid.
  lguest: Allow running under paravirt-enabled KVM.
2011-10-29 07:52:16 -07:00
Linus Torvalds
249842477c Merge branch 'devicetree/merge' of git://git.secretlab.ca/git/linux-2.6
* 'devicetree/merge' of git://git.secretlab.ca/git/linux-2.6:
  ARM: mark empty gpio.h files empty
  gpio: Fix ARM versatile-express build failure
  of: include errno.h
2011-10-29 07:29:40 -07:00
Linus Torvalds
18c0635363 Merge branch 'spi/next' of git://git.secretlab.ca/git/linux-2.6
* 'spi/next' of git://git.secretlab.ca/git/linux-2.6:
  drivercore: Add helper macro for platform_driver boilerplate
  spi: irq: Remove IRQF_DISABLED
  OMAP: SPI: Fix the trying to free nonexistent resource error
  spi/spi-ep93xx: add module.h include
  spi/tegra: fix compilation error in spi-tegra.c
  spi: spi-dw: fix all sparse warnings
  spi/spi-pl022: Call pl022_dma_remove(pl022) only if enable_dma is true
  spi/spi-pl022: calculate_effective_freq() must set rate <= requested rate
  spi/spi-pl022: Don't allocate more sg than required.
  spi/spi-pl022: Use GFP_ATOMIC for allocation from tasklet
  spi/spi-pl022: Resolve formatting issues
2011-10-29 07:28:36 -07:00
Linus Torvalds
41684f67af Merge branch 'gpio/next' of git://git.secretlab.ca/git/linux-2.6
* 'gpio/next' of git://git.secretlab.ca/git/linux-2.6:
  h8300: Move gpio.h to gpio-internal.h
  gpio: pl061: add DT binding support
  gpio: fix build error in include/asm-generic/gpio.h
  gpiolib: Ensure struct gpio is always defined
  irq: Add EXPORT_SYMBOL_GPL to function of irq generic-chip
  gpio-ml-ioh: Use NUMA_NO_NODE not GFP_KERNEL
  gpio-pch: Use NUMA_NO_NODE not GFP_KERNEL
  gpio: langwell: ensure alternate function is cleared
  gpio-pch: Support interrupt function
  gpio-pch: Save register value in suspend()
  gpio-pch: modify gpio_nums and mask
  gpio-pch: support ML7223 IOH n-Bus
  gpio-pch: add spinlock in suspend/resume processing
  gpio-pch: Delete invalid "restore" code in suspend()
  gpio-ml-ioh: Fix suspend/resume issue
  gpio-ml-ioh: Support interrupt function
  gpio-ml-ioh: Delete unnecessary code
  gpio/mxc: add chained_irq_enter/exit() to mx3_gpio_irq_handler()
  gpio/nomadik: use genirq core to track enablement
  gpio/nomadik: disable clocks when unused
2011-10-29 07:27:45 -07:00
Eric Sandeen
6d6a435190 ext4: fix race in xattr block allocation path
Ceph users reported that when using Ceph on ext4, the filesystem
would often become corrupted, containing inodes with incorrect
i_blocks counters.

I managed to reproduce this with a very hacked-up "streamtest"
binary from the Ceph tree.

Ceph is doing a lot of xattr writes, to out-of-inode blocks.
There is also another thread which does sync_file_range and close,
of the same files.  The problem appears to happen due to this race:

sync/flush thread               xattr-set thread
-----------------               ----------------

do_writepages                   ext4_xattr_set
ext4_da_writepages              ext4_xattr_set_handle
mpage_da_map_blocks             ext4_xattr_block_set
        set DELALLOC_RESERVE
                                ext4_new_meta_blocks
                                        ext4_mb_new_blocks
                                                if (!i_delalloc_reserved_flag)
                                                        vfs_dq_alloc_block
ext4_get_blocks
	down_write(i_data_sem)
        set i_delalloc_reserved_flag
	...
	up_write(i_data_sem)
                                        if (i_delalloc_reserved_flag)
                                                vfs_dq_alloc_block_nofail


In other words, the sync/flush thread pops in and sets
i_delalloc_reserved_flag on the inode, which makes the xattr thread
think that it's in a delalloc path in ext4_new_meta_blocks(),
and add the block for a second time, after already having added
it once in the !i_delalloc_reserved_flag case in ext4_mb_new_blocks

The real problem is that we shouldn't be using the DELALLOC_RESERVED
state flag, and instead we should be passing
EXT4_GET_BLOCKS_DELALLOC_RESERVE down to ext4_map_blocks() instead of
using an inode state flag.  We'll fix this for now with using
i_data_sem to prevent this race, but this is really not the right way
to fix things.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@kernel.org
2011-10-29 10:15:35 -04:00
Yongqiang Yang
e7b319e397 ext4: trace punch_hole correctly in ext4_ext_map_blocks
When ext4_ext_map_blocks() is called by punch_hole, trace should
trace blocks punched out.

Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-10-29 09:39:51 -04:00
Yongqiang Yang
02dc62fba8 ext4: clean up AGGRESSIVE_TEST code
Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-10-29 09:29:11 -04:00
Yongqiang Yang
81fdbb4a8d ext4: move variables to their scope
Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-10-29 09:23:38 -04:00
Dmitry Monakhov
5cb81dabcc ext4: fix quota accounting during migration
The tmp_inode should have same uid/gid as the original inode.
Otherwise new metadata blocks will be accounted to wrong quota-id,
which will result in a quota leak after the inode migration is
completed.

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-10-29 09:05:00 -04:00
Dmitry Monakhov
fba90ffee8 ext4: migrate cleanup
This patch cleanup code a bit, actual logic not changed
- Move current block pointer to migrate_structure, let's all
  walk info will be in one structure.
- Get rid of usless null ind-block ptr checks, caller already
  does that check.

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-10-29 09:03:00 -04:00
Theodore Ts'o
6cdbb0effc fs: optimize out 16 bytes worth of padding in struct inode
Rearrange the fields in struct inode so that on an x86_64 system,
fields that require 8-byte alignment don't end up causing 4-byte holes
in the structure.  It reduces the size of struct inode from 568 bytes
to 552 bytes.

Also move the fields protected by i_lock (i_blocks, i_bytes, and
i_size) into the same cache line as i_lock.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-10-29 08:24:18 -04:00
Shubhrajyoti D
39f1b56593 spi/omap: Correct the error path
Currently McSPI driver doesnt follow correct failure fallback steps
attempting to correct the same.

Also:
- label names changed to give meaningful names.
- Setting the driver data to NULL in remove

Signed-off-by: Hebbar, Gururaja <gururaja.hebbar@ti.com>
Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-10-29 14:07:18 +02:00
Shubhrajyoti D
751c925cbb spi/omap: call pm_runtime_disable in error path and remove
omap mcspi probe() doesnt call pm_runtime  disable functions
in case of failure. remove() doesnt call pm_runtime disable. This could
lead to warnings as below on subsequent insmod.

~# insmod spi-omap2-mcspi.ko
[  255.383671] omap2_mcspi omap2_mcspi.1: Unbalanced pm_runtime_enable!
...

This patch adds the pm_runtime disable() at appropriate stages.

Signed-off-by: Hebbar, Gururaja <gururaja.hebbar@ti.com>
Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-10-29 14:07:18 +02:00
Shubhrajyoti D
2856ac13b8 spi/omap: Use a workqueue per omap2_mcspi controller
Currently all the spi controllers share the work queue.
This patch allocates a work queue per controller.

Signed-off-by: Steve Wilkins <steve.wilkins@raymarine.com>
Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-10-29 14:05:47 +02:00
Nicolas Ferre
ed5f886d16 dt: add empty of_alias_get_id() for non-dt builds
Add function of_alias_get_id() reporting -ENOSYS
for non-dt builds, so that drivers migrating to dt
can save some '#ifdef CONFIG_OF'.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-10-29 13:49:09 +02:00
Linus Walleij
81397a625d ARM: mark empty gpio.h files empty
It is generally a better idea to make intentionally empty files
contain the human-readable /* empty */ comment, also it makes
the files play nice with "make distclean".

Reported-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-10-29 13:05:46 +02:00
Grant Likely
041af835b3 gpio: Fix ARM versatile-express build failure
A missing mach/gpio.h prevents building gpiolib on versatile express.

  CC      drivers/gpio/gpiolib.o
In file included from /.../linux/include/linux/gpio.h:18:0,
                 from /.../linux/drivers/gpio/gpiolib.c:10:
/.../linux/arch/arm/include/asm/gpio.h:5:23: fatal error: mach/gpio.h: No such file or directory
compilation terminated.
make[3]: *** [drivers/gpio/gpiolib.o] Error 1
make[2]: *** [drivers/gpio] Error 2
make[1]: *** [drivers] Error 2
make: *** [sub-make] Error 2

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-10-29 12:50:45 +02:00
Kalle Valo
e51130c0f5 of: include errno.h
When compiling ath6kl for beagleboard (omap2plus_defconfig plus
CONFIG_ATH6KL, CONFIG_OF disable) with current linux-next compilation
fails:

include/linux/of.h:269: error: 'ENOSYS' undeclared (first use in this function)
include/linux/of.h:276: error: 'ENOSYS' undeclared (first use in this function)
include/linux/of.h:289: error: 'ENOSYS' undeclared (first use in this function)

Fix this by including errno.h from of.h.

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-10-29 12:49:40 +02:00
Wolfram Sang
7ea2aa2046 gpio: pca953x: propagate the errno from the chip_init functions
Initializing the chips may return with an error, but this error gets
dropped in probe(). Propagate this further to the driver core. Also,
simplify returning the error in one of the init functions.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-10-29 12:26:29 +02:00
Wolfram Sang
f0eb824bee gpio: pca953x: remove unneeded check for chip type
We can assume our own device_id table is correct, so remove checking if
the chip type is valid. (The check was bogus anyway: If it found an
invalid entry, it returned with 0!) This is in preparation for further
cleanups.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-10-29 12:26:29 +02:00
Thomas Abraham
5a5f50802f i2c-s3c2410: Add device tree support
Add device tree probe support for Samsung's s3c2410 i2c driver.

Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-10-29 11:21:22 +01:00
Thomas Abraham
4fd81eb2d6 i2c-s3c2410: Keep a copy of platform data and use it
The platform data is copied into driver's private data and the copy is
used for all access to the platform data. This simpifies the addition
of device tree support for the i2c-s3c2410 driver.

Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-10-29 11:21:16 +01:00