Commit graph

299,176 commits

Author SHA1 Message Date
Felipe Balbi
025aef8fcf wl12xx: add a platform device to the sdio module
The platform device will be used to match the platform driver that
will be implemented by the core module.

Signed-off-by: Felipe Balbi <balbi@ti.com>
[forward-ported, cleaned-up and rephrased commit message]
[call platform_device_add() instead of platform_device_register()]
[store alloc'ed device platform directly in glue->core]
[fixed the length of memset(res...)]
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-11 16:00:55 +03:00
Felipe Balbi
b65019f661 wl12xx: add an spi glue struct to keep wl and device side-by-side
In order to fully abstract the bus, we need to save the device
structure *beside* wl1271, instead of inside it.

This will help re-structuring the driver so that we avoid the
duplicated code in the bus modules.

Signed-off-by: Felipe Balbi <balbi@ti.com>
[forward-ported and cleaned up and rephrased commit message]
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-11 16:00:51 +03:00
Felipe Balbi
fbe936bcb5 wl12xx: add an sdio glue struct to keep wl and device side-by-side
In order to fully abstract the bus, we need to save the device
structure *beside* wl1271, instead of inside it.

This will help re-structuring the driver so that we avoid the
duplicated code in the bus modules.

Signed-off-by: Felipe Balbi <balbi@ti.com>
[forward-ported and cleaned up and rephrased commit message]
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-11 16:00:46 +03:00
Luciano Coelho
c7e7c227b6 wl12xx: remove sdio_test module
This module has been causing more trouble than being useful.  It only
tests the SDIO speed by connecting to the wl12xx chip and does some
throughput calculations.  It is an ugly quick hack and, if we really
want to have it as part of wl12xx we need to clean it up and implement
it properly.

A tarball of the code has been created and posted here, with some
instructions:

http://wireless.kernel.org/en/users/Drivers/wl12xx#SDIO_performance_test_module

Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-11 16:00:38 +03:00
Mark Brown
ecc37edf7b regulator: Add module.h include to gpio-regulator
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-11 13:59:13 +01:00
J. Bruce Fields
04f9e664b2 nfsd4: move access/deny validity checks to xdr code
I'd rather put more of these sorts of checks into standardized xdr
decoders for the various types rather than have them cluttering up the
core logic in nfs4proc.c and nfs4state.c.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-10-11 08:53:12 -04:00
Eliad Peller
e4120df982 wl12xx: use round-robin policy for tx
Currently, a single vif might starve all the other vifs.
Save the last vif we dequeued a packet from, and continue
with the following one using a round-robin policy.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-11 15:29:57 +03:00
Eliad Peller
f750c82045 wl12xx: add elp wakeup/sleep calls to add_interface
add_interface might be called while the chip is
in elp. add elp_wakeup/sleep calls to handle it.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-11 15:29:56 +03:00
Eliad Peller
e5a359f873 wl12xx: use dynamic rate policies
allocate the rate policies dynamically, instead of using hardcoded
indexes. this is needed for proper multi-role configuration.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-11 15:28:02 +03:00
Eliad Peller
f027743430 wl12xx: call stop() on recovery
The recovery work should call stop() after it removed
all the existing interfaces.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-11 15:12:13 +03:00
Eliad Peller
6e8cd33104 wl12xx: replace all remaining wl->vif references
wl->vif is appropriate only when a single vif is being used.
Instead, pass wlvif as parameter or iterate through all
the vifs (e.g. when a global configuration was changed)

Leave wl->vif only to determine whether a vif was already
added (this check will be removed as well after both the
driver and fw will support multiple vifs)

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-11 15:12:13 +03:00
Eliad Peller
9f259c4e5e wl12xx: make op_config configure all vifs
When mac80211 changes a global (hw) config, iterate
through all the relevant vifs and update them.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-11 15:12:13 +03:00
Eliad Peller
6bd6502990 wl12xx: add power_level field to wlvif
move power_level into the per-interface data.

mac80211 configures some values (e.g. band, channel)
globally, while we configure them per-interface.

In order to make it easier to keep track of the
configured value for each value while keeping sync
with mac80211, save these values both globally
and per-vif.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-11 15:12:13 +03:00
Eliad Peller
61f845f4f4 wl12xx: add channel field to wlvif
add channel into the per-interface data.

mac80211 configures some values (e.g. band, channel)
globally, while we configure them per-interface.

In order to make it easier to keep track of the
configured value for each value while keeping sync
with mac80211, save these values both globally
and per-vif.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-11 15:12:13 +03:00
Eliad Peller
1b92f15ee0 wl12xx: add band field to wlvif
add band field into the per-interface data.

mac80211 configures some values (e.g. band, channel)
globally, while we configure them per-interface.

In order to make it easier to keep track of the
configured value for each value while keeping sync
with mac80211, save these values both globally
and per-vif.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-11 15:12:12 +03:00
Eliad Peller
52630c5d89 wl12xx: make WL1271_FLAG_CS_PROGRESS flag per-vif
This flag should be set per-vif, rather than globally.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-11 15:12:12 +03:00
Eliad Peller
836d6600ea wl12xx: make WL1271_FLAG_PSPOLL_FAILURE flag per-vif
This flag should be set per-vif, rather than globally.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-11 15:12:12 +03:00
Eliad Peller
10c8cd01e3 wl12xx: make WL1271_FLAG_IF_INITIALIZED per-vif
Make the initialization flag per-vif, and add some checks for it.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-11 15:12:12 +03:00
Eliad Peller
0744bdb60b wl12xx: make WL1271_FLAG_RX_STREAMING_STARTED flag per-vif
This flag should be set per-vif, rather than globally.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-11 15:09:58 +03:00
Eliad Peller
8181aecce9 wl12xx: make WL1271_FLAG_STA_STATE_SENT flag per-vif
This flag should be set per-vif, rather than globally.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-11 15:09:58 +03:00
Eliad Peller
c29bb001e4 wl12xx: make WL1271_FLAG_PSM flag per-vif
move WL1271_FLAG_PSM and WL1271_FLAG_PSM_REQUESTED into
per-vif flags.
These flags should be set per-vif, rather than globally.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-11 15:09:58 +03:00
Eliad Peller
53d40d0b86 wl12xx: make WL1271_FLAG_AP_STARTED flag per-vif
This flag should be set per-vif, rather than globally.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-11 15:09:57 +03:00
Eliad Peller
eee514e3d6 wl12xx: make WL1271_FLAG_IBSS_JOINED flag per-vif
This flag should be set per-vif, rather than globally.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-11 15:09:57 +03:00
Eliad Peller
ba8447f641 wl12xx: make WL1271_FLAG_STA_ASSOCIATED flag per-vif
This flag should be set per-vif, rather than globally.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-11 15:09:57 +03:00
Eliad Peller
9eb599e9c6 wl12xx: rearm rx streaming per vif
Currently, the rx streaming doesn't support multi-vif
(the actual wlvif is taken from wl->vif, and the management
is global).

Make the rx streaming timers/works per-vif, and pass the
the actual vif as param.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-11 15:09:57 +03:00
Thomas Hellstrom
5a7b74beca vmwgfx: Take the driver out of staging
Also improve a bit on the Kconfig help.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-10-11 13:06:36 +01:00
Eliad Peller
48e93e402a wl12xx: move tx_security_seq into wlvif
The last security seq num has to be saved across reconfigs.
Add a new "persistent" struct into wlvif, which won't get
deleted on wl12xx_init_vif_data()

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-11 15:04:23 +03:00
Eliad Peller
4b730b6a81 wl12xx: make event handling support multirole
Some events don't indicate the role they are intended for.
In these cases, iterate through all the relevant vifs,
and pass the event to each one of them.

This is only a workaround. future fw releases should indicate
the relevant role_id for such events.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-11 15:04:23 +03:00
Eliad Peller
a4e4130dce wl12xx: configure sleep_policy according to active roles
If there is an active AP role, stay always on.
Otherwise, allow chip to enter elp.

(Note that this is a global configuration, so if the
device is already configured according to our policy,
we don't have to configure it again)

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-11 15:04:23 +03:00
Eliad Peller
a32d0cdfcb wl12xx: support multiple vifs in the tx path
Pass the wlvif associated with each skb as param.

Note that dummy packet doesn't belong to any
particular vif, so we pass NULL in this case.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-11 15:04:22 +03:00
Eliad Peller
8762721473 wl12xx: add vifs list
keep a list of all the vifs associated with our hw.
it will be later used in order to iterate through vifs.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-11 15:04:22 +03:00
Eliad Peller
83587505a2 wl12xx: move bitrate_masks into wlvif
move bitrate_masks into the per-interface data, rather than
being global.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-11 15:04:22 +03:00
Eliad Peller
baf6277ae9 wl12xx: move some functions from remove_interface() to stop()
Leave only vif-specific deinit stuff in remove_interface().
Move the global deinit (including power_off) to stop().

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-11 15:04:22 +03:00
Eliad Peller
d6a3cc2ef9 wl12xx: unify STA and AP tx_queue mechanism
Make sta use the global wl->links[hlid].tx_queue (by
considering its links map) instead of wl->tx_queue,
and then unify the tx and tx_reset flows for the
various vifs.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-11 15:04:22 +03:00
Eliad Peller
4438aca9e1 wl12xx: move last_tx_hlid into wlvif
move last_tx_hlid into the per-interface data, rather than
being global.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-11 15:04:21 +03:00
Eliad Peller
1d095475f5 wl12xx: refactor fw init into a new function
The fw boot and initialization currently happens inside the
add_interface() callback. This is wrong, as add_interface is
called for each new vif. However, we due to some fw limitation
(we have to know the actual mac address on boot), we can't
completely move it into the start() callback.

Until the fw will be fixed, refactor the fw init into
a new function, and call it from add_interface()

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-11 15:04:21 +03:00
Stephen Rothwell
540f41edc1 llist: Add back llist_add_batch() and llist_del_first() prototypes
Commit 1230db8e15 ("llist: Make some llist functions inline")
has deleted the definitions, causing problems for (not upstream yet)
code that tries to make use of them.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Huang Ying <ying.huang@intel.com>
Cc: David Miller <davem@davemloft.net>
Link: http://lkml.kernel.org/r/20111005172528.0d0a8afc65acef7ace22a24e@canb.auug.org.au
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-10-11 12:51:22 +02:00
Michal Marek
0359de7dd5 genksyms: Regenerate lexer and parser 2011-10-11 12:07:05 +02:00
Michal Marek
2c5925d6b7 genksyms: Do not expand internal types
Consider structures, unions and enums defined in the source file as
internal and do not expand them. This way, changes to e.g. struct
serial_private in drivers/tty/serial/8250_pci.c will not affect the
checksum of the pciserial_* exports.
2011-10-11 12:00:39 +02:00
Michal Marek
b06fcd6c83 genksyms: Minor parser cleanup
Move the identical logic for recording a struct/union/enum definition to
a function.
2011-10-11 11:59:19 +02:00
Wu Fengguang
50657fc4df writeback: fix ppc compile warnings on do_div(long long, unsigned long)
Fix powerpc compile warnings

mm/page-writeback.c: In function 'bdi_position_ratio':
mm/page-writeback.c:622:3: warning: comparison of distinct pointer types lacks a cast [enabled by default]
page-writeback.c:635:4: warning: comparison of distinct pointer types lacks a cast [enabled by default]

Also fix gcc "uninitialized var" warnings.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
2011-10-11 17:45:24 +08:00
Adam Jackson
836e53d758 drm: Add KMS debug printk's for encoder and crtc fixup failure
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-10-11 09:26:19 +01:00
Adrian Bunk
2b666859ec x86: Default to vsyscall=native for now
This UML breakage:

  linux-2.6.30.1[3800] vsyscall fault (exploit attempt?) ip:ffffffffff600000 cs:33 sp:7fbfb9c498 ax:ffffffffff600000 si:0 di:606790
  linux-2.6.30.1[3856] vsyscall fault (exploit attempt?) ip:ffffffffff600000 cs:33 sp:7fbfb13168 ax:ffffffffff600000 si:0 di:606790

Is caused by commit 3ae36655 ("x86-64: Rework vsyscall emulation and add
vsyscall= parameter") - the vsyscall emulation code is not fully cooked
yet as UML relies on some rather fragile SIGSEGV semantics.

Linus suggested in https://lkml.org/lkml/2011/8/9/376 to default
to vsyscall=native for now, this patch implements that.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Andrew Lutomirski <luto@mit.edu>
Cc: H. Peter Anvin <hpa@linux.intel.com>
Link: http://lkml.kernel.org/r/20111005214047.GE14406@localhost.pp.htv.fi
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-10-11 08:23:34 +02:00
NeilBrown
34db0cd60f md: add proper write-congestion reporting to RAID1 and RAID10.
RAID1 and RAID10 handle write requests by queuing them for handling by
a separate thread.  This is because when a write-intent-bitmap is
active we might need to update the bitmap first, so it is good to
queue a lot of writes, then do one big bitmap update for them all.

However writeback request devices to appear to be congested after a
while so it can make some guesstimate of throughput.  The infinite
queue defeats that (note that RAID5 has already has a finite queue so
it doesn't suffer from this problem).

So impose a limit on the number of pending write requests.  By default
it is 1024 which seems to be generally suitable.  Make it configurable
via module option just in case someone finds a regression.

Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:50:01 +11:00
NeilBrown
84fc4b56db md: rename "mdk_personality" to "md_personality"
"mdk" doesn't mean anything any more.

Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:49:58 +11:00
NeilBrown
29d3247ea2 md/bitmap remove fault injection options.
These are too hard to use to be much more than noise.

Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:49:56 +11:00
NeilBrown
d1688a6d55 md/raid5: typedef removal: raid5_conf_t -> struct r5conf
Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:49:52 +11:00
NeilBrown
e809636047 md/raid1: typedef removal: conf_t -> struct r1conf
Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:49:05 +11:00
NeilBrown
e879a8793f md/raid10: typedef removal: conf_t -> struct r10conf
Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:49:02 +11:00
NeilBrown
e373ab1091 md/raid0: typedef removal: raid0_conf_t -> struct r0conf
Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 16:48:59 +11:00