Commit graph

299,176 commits

Author SHA1 Message Date
Antti Palosaari
75d404ec04 [media] tda10071: do not download last byte of fw
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-09-21 10:09:00 -03:00
Chris Rankin
f6c226b550 [media] em28xx: ERROR: "em28xx_add_into_devlist" [drivers/media/video/em28xx/em28xx.ko] undefined!
Signed-off-by: Chris Rankin <rankincj@yahoo.com>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-09-21 10:08:51 -03:00
Antti Palosaari
ead20951fb [media] get_dvb_firmware: update tda10071 file url
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-09-21 10:08:26 -03:00
Antti Palosaari
465301b10f [media] get_dvb_firmware: add dvb-fe-tda10071.fw
TDA10071 firmware version 1.21.31.2

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-09-21 10:08:19 -03:00
Michael Krufky
ee03a6795e [media] opera1: fix ERROR: do not use assignment in if condition
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-09-21 10:08:09 -03:00
Michael Krufky
d12f51aa7b [media] m920x: fix ERROR: do not use assignment in if condition
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-09-21 10:07:32 -03:00
Michael Krufky
331423c46d [media] digitv: fix ERROR: do not use assignment in if condition
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-09-21 10:07:26 -03:00
Michael Krufky
d4dd5ce7ca [media] dibusb-mb: fix ERROR: do not use assignment in if condition
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-09-21 10:07:20 -03:00
Michael Krufky
d9abcd743e [media] dibusb-common: fix ERROR: do not use assignment in if condition
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-09-21 10:07:10 -03:00
Michael Krufky
310df3662e [media] cxusb: fix ERROR: do not use assignment in if condition
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-09-21 10:06:57 -03:00
Michael Krufky
2b7a7c30e3 [media] dvb-usb-dvb: ERROR: space required after that ','
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-09-21 10:06:40 -03:00
Michael Krufky
1645c879ff [media] ttusb2: fix ERROR: space required after that ','
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-09-21 10:06:25 -03:00
Michael Krufky
4594303b87 [media] dibusb-mb: fix ERROR: space required after that ','
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-09-21 10:06:16 -03:00
Michael Krufky
b6bd5de2b1 [media] dibusb-common: fix ERROR: space required after that ','
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-09-21 10:06:02 -03:00
Michael Krufky
2a77631333 [media] dib0700: fix ERROR: space required after that ','
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-09-21 10:05:34 -03:00
Michael Krufky
9a9677afed [media] dib0700: fix ERROR: space required before that '&'
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-09-21 10:05:10 -03:00
Michael Krufky
6e1ce98df1 [media] dib0700: fix WARNING: suspect code indent for conditional statements
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-09-21 10:05:00 -03:00
Michael Krufky
e3e59b085e [media] dib0700: fix WARNING: please, no spaces at the start of a line
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-09-21 10:04:48 -03:00
Michael Krufky
1251312a5c [media] mxl111sf: use adap->num_frontends_initialized to determine which frontend is being attached
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-09-21 10:04:35 -03:00
Antti Palosaari
36588715fc [media] em28xx: add support for PCTV DVB-S2 Stick 460e [2013:024f]
It is based of...
* Empia EM28174
* NXP TDA10071 & Conexant CX24118A combo
* Allegro A8293

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-09-21 10:01:47 -03:00
Antti Palosaari
de8e420350 [media] tda10071: NXP TDA10071 DVB-S/S2 driver
NXP TDA10071 DVB-S/S2 demodulator & Conexant CX24118A tuner combo driver

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-09-21 10:01:16 -03:00
Antti Palosaari
85bc9b510a [media] a8293: Allegro A8293 SEC driver
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-09-21 09:59:06 -03:00
Hans Verkuil
88365105d6 [media] v4l2-ctrls: replace is_volatile with V4L2_CTRL_FLAG_VOLATILE
With the new flag there is no need anymore to have a separate is_volatile
field. Modify all users to use the new flag.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-09-21 09:52:21 -03:00
Hans Verkuil
74a4579086 [media] videodev2.h: add V4L2_CTRL_FLAG_VOLATILE
Add a new VOLATILE control flag that is set for volatile controls.
That way applications know whether the value of the control is volatile
(i.e. can change continuously) or not.

Until now this was an internal property, but it is useful to know in
userspace as well.

A typical use case is the gain value when autogain is on. In that case the
hardware will continuously adjust the gain based various environmental
factors.

This patch just adds and documents the flag, it's not yet used.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-09-21 09:52:21 -03:00
Mimi Zohar
8c35ad2027 target: check hex2bin result
Now that hex2bin does error checking, on error add debugging error msg.

Changelog v1 (update):
- fixed definition of 'ret'
- hex2bin now returns an int

Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
2011-09-21 08:27:43 -04:00
Lars-Peter Clausen
6fcb8a3a3a mfd: Fix generic irq chip ack function name for jz4740-adc
In commit 659fb32d1b6("genirq: replace irq_gc_ack() with {set,clr}_bit
variants"), irq_gc_ack was renamed to irq_gc_ack_set_bit. The jz4740-adc
driver still uses the old name which results in a compile error.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-09-21 13:06:34 +02:00
Jack Steiner
6a469e4665 x86: uv2: Workaround for UV2 Hub bug (system global address format)
This is a workaround for a UV2 hub bug that affects the format of system
global addresses.

The GRU API for UV2 was inadvertently broken by a hardware change.  The
format of the physical address used for TLB dropins and for addresses used
with instructions running in unmapped mode has changed.  This change was
not documented and became apparent only when diags failed running on
system simulators.

For UV1, TLB and GRU instruction physical addresses are identical to
socket physical addresses (although high NASID bits must be OR'ed into the
address).

For UV2, socket physical addresses need to be converted.  The NODE portion
of the physical address needs to be shifted so that the low bit is in bit
39 or bit 40, depending on an MMR value.

It is not yet clear if this bug will be fixed in a silicon respin.  If it
is fixed, the hub revision will be incremented & the workaround disabled.

Signed-off-by: Jack Steiner <steiner@sgi.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-09-21 11:23:15 +02:00
Ed Wildgoose
d4f3e35017 x86: geode: New PCEngines Alix system driver
This new driver replaces the old PCEngines Alix 2/3 LED driver with a
new driver that controls the LEDs through the leds-gpio driver. The
old driver accessed GPIOs directly, which created a conflict and
prevented also loading the cs5535-gpio driver to read other GPIOs on
the Alix board. With this new driver, we hook into leds-gpio which in
turn uses GPIO to control the LEDs and therefore it's possible to
control both the LEDs and access onboard GPIOs

Driver is moved to platform/geode as requested by Grant and any other
geode initialisation modules should move here also

This driver is inspired by leds-net5501.c by Alessandro Zummo.

Ideally, leds-net5501.c should also be moved to platform/geode. 
Additionally the driver relies on parts of the patch: 7f131cf3ed ("leds:
leds-alix2c - take port address from MSR) by Daniel Mack to perform
detection of the Alix board.

[akpm@linux-foundation.org: include module.h]

Signed-off-by: Ed Wildgoose <kernel@wildgooses.com>
Cc: git@wildgooses.com
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Daniel Mack <daniel@caiaq.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Reviewed-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-09-21 11:19:42 +02:00
David Henningsson
0b6c49b59f ALSA: hda: hdmi: Hint matching between input devices and pcm devices
Since modern HDMI cards often have more than one output pin and thus
input device, we need to know which one has actually been plugged in.

This patch adds a name hint that indicates which PCM device is connected
to which pin.

Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-09-21 10:31:00 +02:00
hank
cbbc719fcc time: Change jiffies_to_clock_t() argument type to unsigned long
The parameter's origin type is long. On an i386 architecture, it can
easily be larger than 0x80000000, causing this function to convert it
to a sign-extended u64 type.

Change the type to unsigned long so we get the correct result.

Signed-off-by: hank <pyu@redhat.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: <stable@kernel.org>
[ build fix ]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-09-21 10:28:51 +02:00
Suresh Siddha
c020570138 x86, ioapic: Consolidate the explicit EOI code
Consolidate the io-apic EOI code in clear_IO_APIC_pin() and
eoi_ioapic_irq().

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Thomas Renninger <trenn@suse.de>
Cc: Rafael Wysocki <rjw@novell.com>
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Cc: lchiquitto@novell.com
Cc: jbeulich@novell.com
Cc: yinghai@kernel.org
Link: http://lkml.kernel.org/r/20110825190657.259696697@sbsiddha-desk.sc.intel.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-09-21 10:26:28 +02:00
Suresh Siddha
e57253a81d x86, ioapic: Restore the mask bit correctly in eoi_ioapic_irq()
For older IO-APIC's, we were clearing the remote-IRR by changing
the RTE trigger mode to edge and then back to level. We wanted
to mask the RTE during this process, so we were essentially
doing mask+edge and then to unmask+level.

As part of the commit ca64c47cec,
we moved this EOI process earlier where the IO-APIC RTE is
masked. So we were wrongly unmasking it in the eoi_ioapic_irq().

So change the remote-IRR clear sequence in eoi_ioapic_irq() to
mask + edge and then restore the previous RTE entry which will
restore the mask status as well as the level trigger.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Thomas Renninger <trenn@suse.de>
Cc: Rafael Wysocki <rjw@novell.com>
Cc: lchiquitto@novell.com
Cc: jbeulich@novell.com
Cc: yinghai@kernel.org
Link: http://lkml.kernel.org/r/20110825190657.210286410@sbsiddha-desk.sc.intel.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-09-21 10:26:26 +02:00
Suresh Siddha
1e75b31d63 x86, kdump, ioapic: Reset remote-IRR in clear_IO_APIC
In the kdump scenario mentioned below, we can have a case where
the device using level triggered interrupt will not generate any
interrupts in the kdump kernel.

1. IO-APIC sends a level triggered interrupt to the CPU's local APIC.

2. Kernel crashed before the CPU services this interrupt, leaving
   the remote-IRR in the IO-APIC set.

3. kdump kernel boot sequence does clear_IO_APIC() as part of IO-APIC
   initialization. But this fails to reset remote-IRR bit of the
   IO-APIC RTE as the remote-IRR bit is read-only.

4. Device using that level triggered entry can't generate any
   more interrupts because of the remote-IRR bit.

In clear_IO_APIC_pin(), check if the remote-IRR bit is set and if
so do an explicit attempt to clear it (by doing EOI write on
modern io-apic's and changing trigger mode to edge/level on
older io-apic's). Also before doing the explicit EOI to the
io-apic, ensure that the trigger mode is indeed set to level.
This will enable the explicit EOI to the io-apic to reset the
remote-IRR bit.

Tested-by: Leonardo Chiquitto <lchiquitto@novell.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Fixes: https://bugzilla.novell.com/show_bug.cgi?id=701686
Cc: Rafael Wysocki <rjw@novell.com>
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Thomas Renninger <trenn@suse.de>
Cc: jbeulich@novell.com
Cc: yinghai@kernel.org
Link: http://lkml.kernel.org/r/20110825190657.157502602@sbsiddha-desk.sc.intel.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-09-21 10:26:25 +02:00
Carsten Emde
6c4867f646 floppy: use del_timer_sync() in init cleanup
When no floppy is found the module code can be released while a timer
function is pending or about to be executed.

CPU0                                  CPU1
				      floppy_init()
timer_softirq()
   spin_lock_irq(&base->lock);
   detach_timer();
   spin_unlock_irq(&base->lock);
   -> Interrupt
					del_timer();
				        return -ENODEV;
                                      module_cleanup();
   <- EOI
   call_timer_fn();
   OOPS

Use del_timer_sync() to prevent this.

Signed-off-by: Carsten Emde <C.Emde@osadl.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-09-21 10:22:11 +02:00
Wanlong Gao
d11bb4462c blk-cgroup: be able to remove the record of unplugged device
The bug is we're not able to remove the device from blkio cgroup's
per-device control files if it gets unplugged.

To reproduce the bug:

  # mount -t cgroup -o blkio xxx /cgroup
  # cd /cgroup
  # echo "8:0 1000" > blkio.throttle.read_bps_device
  # unplug the device
  # cat blkio.throttle.read_bps_device
  8:0	1000
  # echo "8:0 0" > blkio.throttle.read_bps_device
  -bash: echo: write error: No such device

After patching, the device removal will succeed.

Thanks for the comments of Paul, Zefan, and Vivek.

Signed-off-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Paul Menage <paul@paulmenage.org>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-09-21 10:22:10 +02:00
Suresh Siddha
d3f138106b iommu: Rename the DMAR and INTR_REMAP config options
Change the CONFIG_DMAR to CONFIG_INTEL_IOMMU to be consistent
with the other IOMMU options.

Rename the CONFIG_INTR_REMAP to CONFIG_IRQ_REMAP to match the
irq subsystem name.

And define the CONFIG_DMAR_TABLE for the common ACPI DMAR
routines shared by both CONFIG_INTEL_IOMMU and CONFIG_IRQ_REMAP.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: yinghai@kernel.org
Cc: youquan.song@intel.com
Cc: joerg.roedel@amd.com
Cc: tony.luck@intel.com
Cc: dwmw2@infradead.org
Link: http://lkml.kernel.org/r/20110824001456.558630224@sbsiddha-desk.sc.intel.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-09-21 10:22:03 +02:00
Suresh Siddha
c39d77ffa2 x86, ioapic: Define irq_remap_modify_chip_defaults()
Define irq_remap_modify_chip_defaults() and remove the duplicate
code, cleanup the unnecessary ifdefs.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: yinghai@kernel.org
Cc: youquan.song@intel.com
Cc: joerg.roedel@amd.com
Cc: tony.luck@intel.com
Cc: dwmw2@infradead.org
Link: http://lkml.kernel.org/r/20110824001456.499225692@sbsiddha-desk.sc.intel.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-09-21 10:22:01 +02:00
Suresh Siddha
13ea20f7a2 x86, msi, intr-remap: Use the ioapic set affinity routine
IRQ set affinity routine is same for the IO-APIC IRQ's aswell as
the MSI IRQ's in the presence of interrupt-remapping. This is
because we modify the interrupt-remapping table entry and
doesn't touch the IO-APIC RTE or the MSI entry.

So remove the ir_msi_set_affinity() and re-use the
ir_ioapic_set_affinity()

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: yinghai@kernel.org
Cc: youquan.song@intel.com
Cc: joerg.roedel@amd.com
Cc: tony.luck@intel.com
Cc: dwmw2@infradead.org
Link: http://lkml.kernel.org/r/20110824001456.452760446@sbsiddha-desk.sc.intel.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-09-21 10:21:59 +02:00
Suresh Siddha
f5d1b97bcd iommu: Cleanup ifdefs in detect_intel_iommu()
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: yinghai@kernel.org
Cc: youquan.song@intel.com
Cc: joerg.roedel@amd.com
Cc: tony.luck@intel.com
Cc: dwmw2@infradead.org
Link: http://lkml.kernel.org/r/20110824001456.386003047@sbsiddha-desk.sc.intel.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-09-21 10:21:57 +02:00
Suresh Siddha
80990c5ba6 iommu: No need to set dmar_disabled in check_zero_address()
Before the restructruing of the x86 IOMMU code,
intel_iommu_init() was getting called directly from
pci_iommu_init() and hence needed to explicitly set
dmar_disabled to 1 for the failure conditions of
check_zero_address().

Recent changes don't call intel_iommu_init() if the intel iommu
detection fails as a result of failure in check_zero_address().

So no need for this ifdef and the code inside it.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: yinghai@kernel.org
Cc: youquan.song@intel.com
Cc: joerg.roedel@amd.com
Cc: tony.luck@intel.com
Cc: dwmw2@infradead.org
Link: http://lkml.kernel.org/r/20110824001456.334878686@sbsiddha-desk.sc.intel.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-09-21 10:21:55 +02:00
Suresh Siddha
318fe7df9d iommu: Move IOMMU specific code to intel-iommu.c
Move the IOMMU specific routines to intel-iommu.c leaving the
dmar.c to the common ACPI dmar code shared between DMA-remapping
and Interrupt-remapping.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: yinghai@kernel.org
Cc: youquan.song@intel.com
Cc: joerg.roedel@amd.com
Cc: tony.luck@intel.com
Cc: dwmw2@infradead.org
Link: http://lkml.kernel.org/r/20110824001456.282401285@sbsiddha-desk.sc.intel.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-09-21 10:21:54 +02:00
Suresh Siddha
c2c7286ac6 intr_remap: Call dmar_dev_scope_init() explicitly
Both DMA-remapping aswell as Interrupt-remapping depend on the
dmar dev scope to be initialized. When both DMA and
IRQ-remapping are enabled, we depend on DMA-remapping init code
to call dmar_dev_scope_init(). This resulted in not doing this
init when DMA-remapping was turned off but interrupt-remapping
turned on in the kernel config.

This caused interrupt routing to break with CONFIG_INTR_REMAP=y
and CONFIG_DMAR=n.

This issue was introduced by this commit:

 | commit 9d5ce73a64
 | Author: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
 | Date:   Tue Nov 10 19:46:16 2009 +0900
 |
 |    x86: intel-iommu: Convert detect_intel_iommu to use iommu_init hook

Fix this by calling dmar_dev_scope_init() explicitly from the
interrupt remapping code too.

Reported-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: yinghai@kernel.org
Cc: youquan.song@intel.com
Cc: joerg.roedel@amd.com
Cc: tony.luck@intel.com
Cc: dwmw2@infradead.org
Link: http://lkml.kernel.org/r/20110824001456.229207526@sbsiddha-desk.sc.intel.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-09-21 10:21:52 +02:00
Suresh Siddha
41750d31fc x86, x2apic: Enable the bios request for x2apic optout
On the platforms which are x2apic and interrupt-remapping
capable, Linux kernel is enabling x2apic even if the BIOS
doesn't. This is to take advantage of the features that x2apic
brings in.

Some of the OEM platforms are running into issues because of
this, as their bios is not x2apic aware. For example, this was
resulting in interrupt migration issues on one of the platforms.
Also if the BIOS SMI handling uses APIC interface to send SMI's,
then the BIOS need to be aware of x2apic mode that OS has
enabled.

On some of these platforms, BIOS doesn't have a HW mechanism to
turnoff the x2apic feature to prevent OS from enabling it.

To resolve this mess, recent changes to the VT-d2 specification:

 http://download.intel.com/technology/computing/vptech/Intel(r)_VT_for_Direct_IO.pdf

includes a mechanism that provides BIOS a way to request system
software to opt out of enabling x2apic mode.

Look at the x2apic optout flag in the DMAR tables before
enabling the x2apic mode in the platform. Also print a warning
that we have disabled x2apic based on the BIOS request.

Kernel boot parameter "intremap=no_x2apic_optout" can be used to
override the BIOS x2apic optout request.

Signed-off-by: Youquan Song <youquan.song@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: yinghai@kernel.org
Cc: joerg.roedel@amd.com
Cc: tony.luck@intel.com
Cc: dwmw2@infradead.org
Link: http://lkml.kernel.org/r/20110824001456.171766616@sbsiddha-desk.sc.intel.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-09-21 10:21:50 +02:00
Ayan George
4c823cc3d5 drivers/block/loop.c: remove unnecessary bdev argument from loop_clr_fd()
If the loop device is associated (lo->lo_state == Lo_bound), it will have
a valid bdev pointed to by lo->lo_device.  There is no reason to ever pass
an additional block_device pointer.

Signed-off-by: Ayan George <ayan.george@canonical.com>
Cc: Phillip Susi <psusi@cfl.rr.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@google.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-09-21 10:02:13 +02:00
Phillip Susi
8a9c594422 drivers/block/loop.c: emit uevent on auto release
The loopback driver failed to emit the change uevent when auto releasing
the device.  Fixed lo_release() to pass the bdev to loop_clr_fd() so it
can emit the event.

Signed-off-by: Phillip Susi <psusi@cfl.rr.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Ayan George <ayan@ayan.net>
Signed-off-by: Andrew Morton <akpm@google.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-09-21 10:02:13 +02:00
Sergei Shtylyov
5a3a76e6c3 drivers/block/cpqarray.c: use pci_dev->revision
This driver uses PCI_CLASS_REVISION instead of PCI_REVISION_ID, so it
wasn't converted by commit 44c10138fd ("PCI: Change all drivers to
use pci_device->revision").

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Acked-by: Mike Miller <mike.miller@hp.com>
Cc: Chirag Kantharia <chirag.kantharia@hp.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@google.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-09-21 10:02:13 +02:00
Andrew Morton
499337bb65 block/blk-sysfs.c: fix kerneldoc references
The kerneldoc for blk_release_queue() is referring to blk_cleanup_queue().

Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@google.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-09-21 10:01:22 +02:00
Suresh Jayaraman
75df713627 block: document blk-plug
Thus spake Andrew Morton:

"And I have the usual maintainability whine.  If someone comes up to
vmscan.c and sees it calling blk_start_plug(), how are they supposed to
work out why that call is there?  They go look at the blk_start_plug()
definition and it is undocumented.  I think we can do better than this?"

Adapted from the LWN article - http://lwn.net/Articles/438256/ by Jens
Axboe and from an earlier attempt by Shaohua Li to document blk-plug.

[akpm@linux-foundation.org: grammatical and spelling tweaks]
Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de>
Cc: Shaohua Li <shaohua.li@intel.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@google.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-09-21 10:00:16 +02:00
Russell King
f70cac8d9c Merge branch 'kprobes-test' of git://git.yxit.co.uk/linux into devel-stable 2011-09-21 08:48:33 +01:00
Wolfgang Grandegger
38034518c0 can/sja1000: driver for PEAK PCAN PCI/PCIe cards
This patch add the peak_pci driver for the PCAN PCI/PCIe cards (1, 2, 3
or 4 channels) from PEAK Systems (http://www.peak-system.com).

Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Tested-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-21 02:29:02 -04:00