Commit graph

299,176 commits

Author SHA1 Message Date
Clemens Ladisch
dba8b46992 ALSA: mpu401: clean up interrupt specification
The semantics of snd_mpu401_uart_new()'s interrupt parameters are
somewhat counterintuitive:  To prevent the function from allocating its
own interrupt, either the irq number must be invalid, or the irq_flags
parameter must be zero.  At the same time, the irq parameter being
invalid specifies that the mpu401 code has to work without an interrupt
allocated by the caller.  This implies that, if there is an interrupt
and it is allocated by the caller, the irq parameter must be set to
a valid-looking number which then isn't actually used.

With the removal of IRQF_DISABLED, zero becomes a valid irq_flags value,
which forces us to handle the parameters differently.

This patch introduces a new flag MPU401_INFO_IRQ_HOOK for when the
device interrupt is handled by the caller, and makes the allocation of
the interrupt to depend only on the irq parameter.  As suggested by
Takashi, the irq_flags parameter was dropped because, when used, it had
the constant value IRQF_DISABLED.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-09-14 11:00:51 +02:00
Thomas Gleixner
4523f6ada8 alarmtimers: Fix error handling
commit 8bc0daf (alarmtimers: Rework RTC device selection using class
interface) did not implement required error checks. Add them.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-09-14 10:54:29 +02:00
Eliad Peller
b6883582a8 wl12xx: use kstrtoul_from_user
simplify code by calling kstrtoul_from_user() (instead of
copy_from_user() + kstrtoul())

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-09-14 11:47:43 +03:00
Luciano Coelho
04907011d5 wl12xx: remove deprecated CONFIG_WL12XX_HT flag
The driver now support HT properly, so we can always have HT enabled.

Remove the WL12XX_HT configuration.

Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-09-14 11:47:34 +03:00
Arik Nemtsov
14623787ab wl12xx: don't queue a new dummy packet if one is already pending
The firmware only asks for one dummy packet at a time, but sometimes we
are unable to provide it before a FW timer expires. When this happens,
the FW will re-request the dummy packet. If a packet is still queued in
the driver queues, do nothing in this case.

This prevents spurious dummy packets from clogging up the VO AC.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-09-14 11:47:26 +03:00
Eliad Peller
9487775c5b wl12xx: add config_hangover command
Add wl12xx_acx_config_hangover() and respective conf values.
This command configures how long the chip will stay awake
after it was configured to enter psm.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-09-14 11:47:26 +03:00
Eliad Peller
e0b38265b0 wl12xx: check for ROC on scan_complete
When scan completes, and we are not associated, we should start
the dev role and ROC. however, we might already be in this situation
(e.g. if we got disconnected during scan). check for it.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-09-14 11:47:26 +03:00
Eliad Peller
2ec7da254c wl12xx: don't use WL1271_SCAN_OPT_PRIORITY_HIGH flag
When setting the WL1271_SCAN_OPT_PRIORITY_HIGH flag, the
driver requests a scan *now*, and the fw doesn't enter psm
before scanning, which in turn might cause packets loss.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-09-14 11:47:26 +03:00
Eliad Peller
87579550b2 wl12xx: don't disconnect on recovery
allow full connection recovery by dropping the
beacon_loss notification.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-09-14 11:47:26 +03:00
Eliad Peller
a0a521560a wl12xx: add beacon_filtering debugfs file
Allow enabling/disabling beacon_filtering by debugfs,
in order to reduce the log size while debugging (beacon
filtering is disabled by default in AP mode, as beacons
are needed for ERP configuration).

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-09-14 11:47:18 +03:00
Eliad Peller
2a5bff091f wl12xx: add module_param to trigger BUG() on recovery
Crashing on recovery is useful for debugging, as a JTAG
can be connected in order to investigate the current fw state.
(otherwise, a reconfiguration will occur)

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-09-14 11:47:18 +03:00
Eliad Peller
5c472148b0 wl12xx: print the seq_num of rx packet
Make it easier to match the driver log against
a sniffer log.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-09-14 11:47:18 +03:00
Eliad Peller
c91d06006d wl12xx: print acx id
Add id param to the acx debug print (on wl1271_cmd_configure)

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-09-14 11:47:17 +03:00
Luciano Coelho
c6ceb8726f Merge branch 'wl12xx-next' into for-linville 2011-09-14 11:32:15 +03:00
Tao Ma
8ad6a56f56 block: Don't check QUEUE_FLAG_SAME_COMP in __blk_complete_request
In __blk_complete_request, we check both QUEUE_FLAG_SAME_COMP and req->cpu
to decide whether we should use req->cpu. Actually the user can also
select the complete cpu by either setting BIO_CPU_AFFINE or by calling
bio_set_completion_cpu. Current solution makes these 2 ways don't work
any more. So we'd better just check req->cpu.

Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-09-14 09:31:01 +02:00
Boojin Kim
51ddf31da1 ARM: SAMSUNG: Remove Samsung specific enum type for dma direction
This patch removes the samsung specific enum type 's3c2410_dmasrc'
and uses 'dma_data_direction' instead.

Signed-off-by: Boojin Kim <boojin.kim@samsung.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-09-14 11:10:04 +05:30
Boojin Kim
344b4c4888 ASoC: Samsung: Update DMA interface
This patch adds to support the DMA PL330 driver that uses
DMA generic API. Samsung sound driver uses DMA generic API
if architecture supports it. Otherwise, use samsung specific
S3C-PL330 API driver to transfer PCM data.

Signed-off-by: Boojin Kim <boojin.kim@samsung.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Cc: Jassi Brar <jassisinghbrar@gmail.com>
Cc: Liam Girdwood <lrg@ti.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
[kgene.kim@samsung.com: removed useless variable]
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-09-14 11:10:04 +05:30
Boojin Kim
82ab8cd7ec spi/s3c64xx: Merge dma control code
This patch modifies to merge the dma control code. Original
s3c64xx spi driver has each dma control code for rx and tx
channel. This patch merges these dma control codes into one.
With this patch, a dma setup function and callback function
handle for both rx and tx channel.

Signed-off-by: Boojin Kim <boojin.kim@samsung.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-09-14 11:10:03 +05:30
Boojin Kim
39d3e8074e spi/s3c64xx: Add support DMA engine API
This patch adds to support DMA generic API to transfer raw
SPI data. Basiclly the spi driver uses DMA generic API if
architecture supports it. Otherwise, uses Samsung specific
S3C-PL330 APIs.

Signed-off-by: Boojin Kim <boojin.kim@samsung.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-09-14 11:10:03 +05:30
Boojin Kim
978ce50dd5 ARM: SAMSUNG: Remove S3C-PL330-DMA driver
Since DMA generic APIs can be used for Samsung DMA now so that
the s3c-pl330 which includes Samsung specific DMA APIs can be
removed.

Signed-off-by: Boojin Kim <boojin.kim@samsung.com>
Cc: Jassi Brar <jassisinghbrar@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-09-14 11:10:03 +05:30
Boojin Kim
3091e61173 ARM: S5P64X0: Use generic DMA PL330 driver
This patch makes Samsung S5P64X0 to use DMA PL330 driver
on DMADEVICE. The S5P64X0 uses DMA generic APIs instead of
SAMSUNG specific S3C-PL330 APIs.

Signed-off-by: Boojin Kim <boojin.kim@samsung.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-09-14 11:10:03 +05:30
Boojin Kim
a422bd0f6d ARM: S5PC100: Use generic DMA PL330 driver
This patch makes Samsung S5PC100 to use DMA PL330 driver
on DMADEVICE. The S5PC100 uses DMA generic APIs instead of
SAMSUNG specific S3C-PL330 APIs.

Signed-off-by: Boojin Kim <boojin.kim@samsung.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-09-14 11:10:03 +05:30
Boojin Kim
dafc954304 ARM: S5PV210: Use generic DMA PL330 driver
This patch makes Samsung S5PV210 to use DMA PL330 driver
on DMADEVICE. The S5PV210 uses DMA generic APIs instead of
SAMSUNG specific S3C-PL330 APIs.

Signed-off-by: Boojin Kim <boojin.kim@samsung.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-09-14 11:10:02 +05:30
Boojin Kim
bf856fbb5e ARM: EXYNOS4: Use generic DMA PL330 driver
This patch makes Samsung EXYNOS4 to use DMA PL330 driver
on DMADEVICE. The EXYNOS4 uses DMA generic APIs instead of
SAMSUNG specific S3C-PL330 APIs.

Signed-off-by: Boojin Kim <boojin.kim@samsung.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-09-14 11:10:02 +05:30
Boojin Kim
c4e1662550 ARM: SAMSUNG: Add common DMA operations
This patch adds common DMA operations which are used for Samsung DMA
drivers. Currently there are two types of DMA driver for Samsung SoCs.
The one is S3C-DMA for S3C SoCs and the other is PL330-DMA for S5P SoCs.
This patch provides funcion pointers for common DMA operations to DMA
client driver like SPI and Audio. It makes DMA client drivers support
multi-platform.
In addition, this common DMA operations implement the shared actions
that are needed for DMA client driver. For example shared actions are
filter() function for dma_request_channel() and parameter passing for
device_prep_slave_sg().

Signed-off-by: Boojin Kim <boojin.kim@samsung.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-09-14 11:10:02 +05:30
Boojin Kim
aa0de00e4b ARM: SAMSUNG: Update to use PL330-DMA driver
This patch adds to support PL330-DMA driver on DMADEVICE for S5P SoCs.

Signed-off-by: Boojin Kim <boojin.kim@samsung.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-09-14 11:10:01 +05:30
Boojin Kim
42bc9cf459 DMA: PL330: Add DMA_CYCLIC capability
This patch adds DMA_CYCLIC capability that is used for audio driver.
DMA driver activated with it reuses the dma requests that were submitted
through tx_submit().

Signed-off-by: Boojin Kim <boojin.kim@samsung.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-09-14 11:10:01 +05:30
Boojin Kim
ae43b886f1 DMA: PL330: Remove the start operation for handling DMA_TERMINATE_ALL command
Original code carries out the start operation after flush operation.
But start operation is not required for DMA_TERMINATE_ALL command.
So, this patch removes the unnecessary start operation and only carries out
the flush operation for handling DMA_TERMINATE_ALL command.

Signed-off-by: Boojin Kim <boojin.kim@samsung.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
[Fixed typos in changelog]
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-09-14 11:10:01 +05:30
Boojin Kim
1d0c1d606d DMA: PL330: Support DMA_SLAVE_CONFIG command
Signed-off-by: Boojin Kim <boojin.kim@samsung.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-09-14 11:10:01 +05:30
Boojin Kim
1b9bb715e7 DMA: PL330: Update PL330 DMA API driver
This patch updates following 3 items.
1. Removes unneccessary code.
2. Add AMBA, PL330 configuration
3. Change the meaning of 'peri_id' variable
   from PL330 event number to specific dma id by user.

Signed-off-by: Boojin Kim <boojin.kim@samsung.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-09-14 11:10:01 +05:30
Boojin Kim
a2f5203fec DMA: PL330: Add support runtime PM for PL330 DMAC
Signed-off-by: Boojin Kim <boojin.kim@samsung.com>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-09-14 11:10:00 +05:30
Trond Myklebust
11fcee0293 NFSD: Add a cache for fs_locations information
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
[ cel: since this is server-side, use nfsd4_ prefix instead of nfs4_ prefix. ]
[ cel: implement S_ISVTX filter in bfields-normal form ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-09-13 22:44:17 -04:00
Trond Myklebust
2f1ddda174 NFSD: Remove the ex_pathname field from struct svc_export
There are no more users...

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-09-13 22:44:10 -04:00
Trond Myklebust
ed748aacb8 NFSD: Cleanup for nfsd4_path()
The current code is sort of hackish in that it assumes a referral is always
matched to an export. When we add support for junctions that may not be the
case.
We can replace nfsd4_path() with a function that encodes the components
directly from the dentries. Since nfsd4_path is currently the only user of
the 'ex_pathname' field in struct svc_export, this has the added benefit
of allowing us to get rid of that.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-09-13 22:43:42 -04:00
Paul Walmsley
1f1b0353aa OMAP3: id: remove identification codes that only correspond to marketing names
The OMAP3505/AM3505 appears to be based on the same silicon as the
OMAP3517/AM3517, with some features disabled via eFuse bits.  Follow
the same practice as OMAP3430 and identify these devices internally as
part of the OMAP3517/AM3517 family.

The OMAP3503/3515/3525/3530 chips appear to be based on the same silicon
as the OMAP3430, with some features disabled via eFuse bits.  Identify
these devices internally as part of the OMAP3430 family.

Remove the old OMAP35XX_CLASS, which actually covered two very different
chip families.  The OMAP3503/3515/3525/3530 chips will now be covered by
OMAP343X_CLASS, since the silicon appears to be identical.  For the
OMAP3517/AM3517 family, create a new class, OMAP3517_CLASS.

Thanks to Tony Lindgren <tony@atomide.com> for some help with the second
revision of this patch.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Sanjeev Premi <premi@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Tested-by: Igor Grinberg <grinberg@compulab.co.il>
Tested-by: Abhilash Koyamangalath <abhilash.kv@ti.com>
2011-09-13 19:52:13 -06:00
H Hartley Sweeten
003f6c9df5 lib/sha1.c: quiet sparse noise about symbol not declared
Include <linux/cryptohash.h> to pickup the declarations for sha_transform
and sha_init to quite the sparse noise:

  warning: symbol 'sha_transform' was not declared. Should it be static?
  warning: symbol 'sha_init' was not declared. Should it be static?

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Mandeep Singh Baines <msb@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-09-13 16:09:41 -07:00
Benjamin Herrenschmidt
1a4b1a41b8 pci: Don't crash when reading mpss from root complex
In pcie_find_smpss(), we have the following statement:

 	if (dev->is_hotplug_bridge && (!list_is_singular(&dev->bus->devices) ||
	    dev->bus->self->pcie_type != PCI_EXP_TYPE_ROOT_PORT))

The problem is that at least on my machine, this gets called for the
root complex (virtual P2P bridge), and dev->bus->self is NULL since
the parent bus for this is not itself anchor to a PCI device.

This adds the necessary NULL check.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Jon Mason <mason@myri.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-09-13 16:08:31 -07:00
J. Bruce Fields
ee626a77d3 nfsd4: better stateid hashing
First, we shouldn't care here about the structure of the opaque part of
the stateid.  Second, this hash is really dumb.  (I'm not sure the
replacement is much better, though--to look at it another patch.)

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-09-13 18:30:36 -04:00
J. Bruce Fields
69064a2764 nfsd4: use deleg changes to cleanup preprocess_stateid_op
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-09-13 18:30:36 -04:00
J. Bruce Fields
97b7e3b6d4 nfsd4: fix test_stateid for delegation stateid's
Test_stateid should handle delegation stateid's as well.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-09-13 18:30:35 -04:00
J. Bruce Fields
f459e45359 nfsd4: hash deleg stateid's like any other
It's simpler to look up delegation stateid's in the same hash table as
any other stateid.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-09-13 18:30:34 -04:00
J. Bruce Fields
36d44c6038 nfsd4: share common stid-hashing helper function
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-09-13 18:30:33 -04:00
J. Bruce Fields
d5477a8db8 nfsd4: add common dl_stid field to delegation
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-09-13 18:30:32 -04:00
J. Bruce Fields
dcef0413da nfsd4: move some of nfs4_stateid into a separate structure
We want delegations to share more with open/lock stateid's, so first
we'll pull out some of the common stuff we want to share.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-09-13 18:29:58 -04:00
J. Bruce Fields
91a8c04031 nfsd4: remove redundant stateid initialization
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-09-13 18:29:04 -04:00
J. Bruce Fields
881ea2b11e nfsd4: rename init_stateid
Note this is actually open-stateid specific.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-09-13 18:29:03 -04:00
J. Bruce Fields
2288d0e395 nfsd4: pass around typemask instead of flags
We're only using those flags to choose lock or open stateid's at this
point.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-09-13 18:29:00 -04:00
J. Bruce Fields
c0a5d93efb nfsd4: split preprocess_seqid, cleanup
Move most of this into helper functions.  Also move the non-CONFIRM case
into caller, providing a helper function for that purpose.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-09-13 18:27:35 -04:00
J. Bruce Fields
4d71ab8751 nfsd4: split up find_stateid
Minor cleanup.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-09-13 18:27:31 -04:00
Tetsuo Handa
a8f7640963 TOMOYO: Avoid race when retrying "file execute" permission check.
There was a race window that the pathname which is subjected to "file execute"
permission check when retrying via supervisor's decision because the pathname
was recalculated upon retry. Though, there is an inevitable race window even
without supervisor, for we have to calculate the symbolic link's pathname from
"struct linux_binprm"->filename rather than from "struct linux_binprm"->file
because we cannot back calculate the symbolic link's pathname from the
dereferenced pathname.

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: James Morris <jmorris@namei.org>
2011-09-14 08:27:07 +10:00