Commit graph

299,176 commits

Author SHA1 Message Date
Amit Kumar Salecha
fef0c0600b qlcnic: define error code for loopback test
o Defined error code such as fw not responding, test already running and
  cable not connected.
o Check Fw capability before performing loopback test.

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-14 08:49:44 -07:00
Sucheta Chakraborty
f127f4727f qlcnic: fix race in skb->len access.
As soon as skb is given to hardware, TX completion can free skb under us.
Therefore, we should update dev stats before kicking the device.

Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-14 08:49:44 -07:00
Sucheta Chakraborty
e5dcf6dcde qlcnic: enable mac-learning in promiscous mode.
MAC learning is required in bridge mode.
During bridge mode device will be put in promiscous mode.

Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-14 08:49:44 -07:00
Sritej Velaga
a941fef81b qlcnic: updated supported cards information
Added QME8242-k 10GbE Dual Port Mezzanine Card to supported card info.

Signed-off-by: Sritej Velaga <sritej.velaga@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-14 08:49:44 -07:00
Sritej Velaga
7b749ff4df qlcnic: fix chip reset logic
Chip reset logic (IDC logic) has changed with fw dump support.
This broked compatibility with driver using older IDC logic.
Changes to make it compatible with drivers using older IDC logic.

Signed-off-by: Sritej Velaga <sritej.velaga@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-14 08:49:44 -07:00
Michael Chan
41c2178adc bnx2: Read iSCSI config from shared memory during ->probe()
The scratchpad location that we were reading from has not been
initialized yet during ->probe(), so we were getting inaccurate
information.

Update version to 2.1.10.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Reviewed-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-14 08:46:08 -07:00
Jeffrey Huang
ecdbf6e0d5 bnx2: Add MCP dump
to help debug issues related to management firmware.

Signed-off-by: Jeffrey Huang <huangjw@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Reviewed-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-14 08:46:08 -07:00
Michael Chan
558e4c758c cnic: Return proper error code if we fail to send netlink message
to allow iSCSI connection to fail faster instead of waiting for the
long timeout.

Update version to 2.5.6.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Reviewed-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-14 08:46:07 -07:00
Michael Chan
e1dd883cb1 cnic: Fix ring setup/shutdown code
Latest bnx2x driver uses different CID for the iSCSI rings, so
we need to pass it in the ring init data.  The rx ring is also
zeroed out to prevent stale DMA addresses from being used after
shutdown.

The same cp local variable redefined inside the else branch is
also eliminated.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-14 08:46:07 -07:00
Michael Chan
b7d40315c9 cnic: Fix port_mode setting
CHIP_2_PORT_MODE was not set correctly.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Reviewed-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-14 08:46:07 -07:00
Michael Chan
973e574e26 cnic: Replace get_random_bytes() with random32()
Suggested by Stephen Hemminger <shemminger@vyatta.com>

Signed-off-by: Michael Chan <mchan@broadcom.com>
Reviewed-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-14 08:46:07 -07:00
David S. Miller
10d1e8ca8d Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/bwh/sfc-next 2011-07-14 08:43:32 -07:00
Matt Carlson
cd0d7228b4 tg3: Match power source to driver state
Now that the driver state (and power source) is being more intensely
scrutinized, we need to make sure it is correct 100% of the time.  This
patch finds and fixes all dangling power state transitions.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-14 08:41:59 -07:00
Matt Carlson
3a1e19d383 tg3: Add function status reporting
This patch adds code to update the status of the function to a common
location to the critical section added in the previous patch.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-14 08:41:59 -07:00
Matt Carlson
6f5c8f8317 tg3: Create critical section around GPIO toggling
The code that performs the power source switching will need to consider
the status of the other devices before making any switches.  The status
updates and power source switching will need to be an atomic operation,
so a critical section will be needed.  This patch establishes the
critical section through a CPMU mutex.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-14 08:41:59 -07:00
Matt Carlson
69f11c9936 tg3: Determine PCI function number in one place
tg3 devices will need to know exactly what function number they are so
that they can communicate their status to the other functions.  In a KVM
environment, the function number of a device presented by the kernel
might not be the true function number, so an alternative method to
determine the function number is needed.

This patch used to contain an implementation for the alternative method,
but recently we discovered a hardware bug that renders it incorrect.
While new method is not yet known, it is still useful to consolidate the
code that determines the PCI function to one location and use the
results throughout the code.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-14 08:41:59 -07:00
Matt Carlson
bed9829f3e tg3: Check transitions to D0 power state
Currently pci_set_power_state() does not return useful return codes for
transitions to the D0 power state.  If a device refuses to go into D0,
the PCI layer issues a warning but returns success.

Entering into D0 is a requirement for correct operation of tg3 devices
though.  If the PCI layer should be changed to return an error code for
this type of failure, the tg3 driver would be interested in catching it
and reacting to it.  This patch makes the necessary modifications.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-14 08:41:59 -07:00
Matt Carlson
1682128587 tg3: Move power state transitions to init_one
The tg3 driver is going to require memory mapped register access much
sooner than before.  This patch makes sure the device is in the D0 power
state as soon as possible, and moves the code that enables the memory
arbiter outside tg3_get_eeprom_hw_cfg() where it can be more easily
monitored.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-14 08:41:59 -07:00
Matt Carlson
c9cab24e95 tg3: Detect APE enabled devs earlier
The following patch will require the driver to communicate with the APE
much sooner than before.  This patch make sure the APE registers are
memory mapped and that the ENABLE_APE bit is set before the first use.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-14 08:41:58 -07:00
Chetan Loke
cc9f01b246 af-packet: fix - avoid reading stale data
Currently we flush tp_status and then flush the remainder of the header+payload.
tp_status should be flushed in the end to avoid stale data being read by user-space.

Incorrectly re-ordered barriers in v1.

Signed-off-by: Chetan Loke <loke.chetan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-14 08:36:33 -07:00
David S. Miller
6a7ebdf2fd Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
	net/bluetooth/l2cap_core.c
2011-07-14 07:56:40 -07:00
David S. Miller
f6b72b6217 net: Embed hh_cache inside of struct neighbour.
Now that there is a one-to-one correspondance between neighbour
and hh_cache entries, we no longer need:

1) dynamic allocation
2) attachment to dst->hh
3) refcounting

Initialization of the hh_cache entry is indicated by hh_len
being non-zero, and such initialization is always done with
the neighbour's lock held as a writer.

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-14 07:53:20 -07:00
Takashi Iwai
00ef9610ac ALSA: hda - Fix krealloc() replacement in hda_codec.c
It was obviously wrong, grr....

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-14 15:58:02 +02:00
Takashi Iwai
7b1655f5f2 ALSA: hda - Re-add need_dac_fix check for multi-io jacks of Realtek codecs
During the rewrite, the check of spec->need_dac_fix and the corresponding
num_dacs change was dropped from the channel-mode control.

This patch re-adds it, and also enables need_dac_fix for ALC880 as default,
as this feature was originally introduced to fix h/w bugs of this chip.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-14 15:33:59 +02:00
Grant Likely
5d10302f46 dt: remove extra xsysace platform_driver registration
After commit 1c48a5c93, "dt: Eliminate
of_platform_{,un}register_driver", the xsysace driver attempts to
register two platform_drivers with the same name, which a) doesn't
work, and b) isn't necessary.  This patch merges the two
platform_drivers.

Reported-by: Daniel Hellstrom <daniel@gaisler.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-14 05:33:52 -06:00
Axel Lin
58499906c8 ASoC: wm8900: fix a memory leak if wm8900_set_fll fails
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-14 20:04:26 +09:00
Glauber Costa
095c0aa83e sched: adjust scheduler cpu power for stolen time
This patch makes update_rq_clock() aware of steal time.
The mechanism of operation is not different from irq_time,
and follows the same principles. This lives in a CONFIG
option itself, and can be compiled out independently of
the rest of steal time reporting. The effect of disabling it
is that the scheduler will still report steal time (that cannot be
disabled), but won't use this information for cpu power adjustments.

Everytime update_rq_clock_task() is invoked, we query information
about how much time was stolen since last call, and feed it into
sched_rt_avg_update().

Although steal time reporting in account_process_tick() keeps
track of the last time we read the steal clock, in prev_steal_time,
this patch do it independently using another field,
prev_steal_time_rq. This is because otherwise, information about time
accounted in update_process_tick() would never reach us in update_rq_clock().

Signed-off-by: Glauber Costa <glommer@redhat.com>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Tested-by: Eric B Munson <emunson@mgebm.net>
CC: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
CC: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-07-14 12:59:47 +03:00
Glauber Costa
e6e6685acc KVM guest: Steal time accounting
This patch accounts steal time time in account_process_tick.
If one or more tick is considered stolen in the current
accounting cycle, user/system accounting is skipped. Idle is fine,
since the hypervisor does not report steal time if the guest
is halted.

Accounting steal time from the core scheduler give us the
advantage of direct acess to the runqueue data. In a later
opportunity, it can be used to tweak cpu power and make
the scheduler aware of the time it lost.

[avi: <asm/paravirt.h> doesn't exist on many archs]

Signed-off-by: Glauber Costa <glommer@redhat.com>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Tested-by: Eric B Munson <emunson@mgebm.net>
CC: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
CC: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-07-14 12:59:46 +03:00
Glauber Costa
747f292583 ia64: add jump labels for paravirt
Since in a later patch I intend to call jump labels inside
CONFIG_PARAVIRT, IA64 would fail to compile if they are not
provided. This patch provides those jump labels for the IA64
architecture.

Signed-off-by: Glauber Costa <glommer@redhat.com>
Acked-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Rik van Riel <riel@redhat.com>
CC: Tony Luck <tony.luck@intel.com>
CC: Eddie Dong <eddie.dong@intel.com>
CC: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
CC: Peter Zijlstra <peterz@infradead.org>
CC: Anthony Liguori <aliguori@us.ibm.com>
CC: Eric B Munson <emunson@mgebm.net>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-07-14 12:59:45 +03:00
Glauber Costa
3c404b578f KVM guest: Add a pv_ops stub for steal time
This patch adds a function pointer in one of the many paravirt_ops
structs, to allow guests to register a steal time function. Besides
a steal time function, we also declare two jump_labels. They will be
used to allow the steal time code to be easily bypassed when not
in use.

Signed-off-by: Glauber Costa <glommer@redhat.com>
Acked-by: Rik van Riel <riel@redhat.com>
Tested-by: Eric B Munson <emunson@mgebm.net>
CC: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
CC: Peter Zijlstra <peterz@infradead.org>
CC: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-07-14 12:59:44 +03:00
Glauber Costa
c9aaa8957f KVM: Steal time implementation
To implement steal time, we need the hypervisor to pass the guest
information about how much time was spent running other processes
outside the VM, while the vcpu had meaningful work to do - halt
time does not count.

This information is acquired through the run_delay field of
delayacct/schedstats infrastructure, that counts time spent in a
runqueue but not running.

Steal time is a per-cpu information, so the traditional MSR-based
infrastructure is used. A new msr, KVM_MSR_STEAL_TIME, holds the
memory area address containing information about steal time

This patch contains the hypervisor part of the steal time infrasructure,
and can be backported independently of the guest portion.

[avi, yongjie: export delayacct_on, to avoid build failures in some configs]

Signed-off-by: Glauber Costa <glommer@redhat.com>
Tested-by: Eric B Munson <emunson@mgebm.net>
CC: Rik van Riel <riel@redhat.com>
CC: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
CC: Peter Zijlstra <peterz@infradead.org>
CC: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Yongjie Ren <yongjie.ren@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-07-14 12:59:14 +03:00
Axel Lin
b30d89d105 HID: ACRUX - add missing hid_hw_stop() in ax_probe() error path
hid_hw_stop() must be called in ax_probe() error path if hid_hw_start()
was successful.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-14 11:42:53 +02:00
Mark Brown
3b1af3f8c8 ASoC: Log WM8994 FIFO errors from the interrupt
We should spot them anyway on state changes but logging them gives us
better time information about when the misconfiguration happened.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-14 17:17:23 +09:00
Steven Whitehouse
380f7c65a7 GFS2: Resolve inode eviction and ail list interaction bug
This patch contains a few misc fixes which resolve a recently
reported issue. This patch has been a real team effort and has
received a lot of testing.

The first issue is that the ail lock needs to be held over a few
more operations. The lock thats added into gfs2_releasepage() may
possibly be a candidate for replacing with RCU at some future
point, but at this stage we've gone for the obvious fix.

The second issue is that gfs2_write_inode() can end up calling
a glock recursively when called from gfs2_evict_inode() via the
syncing code, so it needs a guard added.

The third issue is that we either need to not truncate the metadata
pages of inodes which have zero link count, but which we cannot
deallocate due to them still being in use by other nodes, or we need
to ensure that those pages have all made it through the journal and
ail lists first. This patch takes the former approach, but the
latter has also been tested and there is nothing to choose between
them performance-wise. So again, we could revise that decision
in the future.

Also, the inode eviction process is now better documented.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Tested-by: Bob Peterson <rpeterso@redhat.com>
Tested-by: Abhijith Das <adas@redhat.com>
Reported-by: Barry J. Marson <bmarson@redhat.com>
Reported-by: David Teigland <teigland@redhat.com>
2011-07-14 08:59:44 +01:00
Tetsuo Handa
0f2a55d5bb TOMOYO: Update kernel-doc.
Update comments for scripts/kernel-doc and fix some of errors reported by
scripts/checkpatch.pl .

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: James Morris <jmorris@namei.org>
2011-07-14 17:50:03 +10:00
Keith Packard
435793dfb8 drm/i915: Add quirk to disable SSC on Lenovo U160 LVDS
We've tried several times to make this machine 'just work', but every
patch that does causes many other machines to fail. This adds a quirk
which special cases this hardware and forces ssc to be
disabled. There's no way to override this from the command line; that
would be a significantly more invasive change.

This patch fixes #36656 on fdo bugzilla:
https://bugs.freedesktop.org/show_bug.cgi?id=36656

Signed-off-by: Keith Packard <keithp@keithp.com>
References: https://bugs.freedesktop.org/show_bug.cgi?id=36656
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
2011-07-13 23:53:41 -07:00
Michel Dänzer
d0254d56c7 drm/radeon: Don't clobber error return value in page flipping cleanup paths.
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-07-14 07:15:16 +01:00
Michel Dänzer
fcc485d667 drm/radeon: Don't generate new fence for page flip.
Use the fence of the new frontbuffer, if any.

Generating a new fence could cause us to wait for completely unrelated
rendering to finish before performing the flip.

Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-07-14 07:14:42 +01:00
Dave Airlie
5762a179b6 Merge branch 'drm-intel-next' of ssh://master.kernel.org/pub/scm/linux/kernel/git/keithp/linux-2.6 into drm-core-next
* 'drm-intel-next' of ssh://master.kernel.org/pub/scm/linux/kernel/git/keithp/linux-2.6: (52 commits)
  drm/i915: provide module parameter description
  drm/i915: add module parameter compiler hints
  drm/i915/bios: Avoid temporary allocation whilst searching for downclock
  drm/i915: Cache GT fifo count for SandyBridge
  i915: Fix opregion notifications
  drm/i915: TVDAC_STATE_CHG does not indicate successful load-detect
  drm/i915: Select correct pipe during TV detect
  drm/i915/ringbuffer: Idling requires waiting for the ring to be empty
  Revert "drm/i915: enable rc6 by default"
  drm/i915: Clean up i915_driver_load failure path
  drm/i915: Enable i915 frame buffer compression by default
  drm/i915: Share the common work of disabling active FBC before updating
  drm/i915: Perform intel_enable_fbc() from a delayed task
  drm/i915: Disable FBC across page-flipping
  drm/i915: Set persistent-mode for ILK/SNB framebuffer compression
  drm/i915: Use of a CPU fence is mandatory to update FBC regions upon CPU writes
  drm/i915: Remove vestigial pitch from post-gen2 FBC control routines
  drm/i915: Replace direct calls to vfunc.disable_fbc with intel_disable_fbc()
  drm/i915: Only export the generic intel_disable_fbc() interface
  drm/i915: Enable GPU reset on Ivybridge.
  ...
2011-07-14 06:45:23 +01:00
Len Brown
7fb574a97f Merge branches 'd3cold', 'bugzilla-37412' and 'bugzilla-38152' into release 2011-07-14 00:16:38 -04:00
Jon Mason
e545b55a1e ACPI: fix 80 char overflow
Trivial fix for 80 char line overflow in drivers/acpi/pci_root.c

Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Len Brown <len.brown@intel.com>
2011-07-14 00:14:05 -04:00
Lan Tianyu
9c921c22a7 ACPI / Battery: Resolve the race condition in the sysfs_remove_battery()
Use battery->lock in sysfs_remove_battery() to make
checking, removing, and clearing bat.dev atomic.
This is necessary because sysfs_remove_battery() may
be invoked concurrently from different paths.

    https://bugzilla.kernel.org/show_bug.cgi?id=35642

Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2011-07-14 00:06:19 -04:00
Lan Tianyu
6e17fb6aa1 ACPI / Battery: Add the check before refresh sysfs in the battery_notify()
In the commit 25be5821, add the refresh sysfs when system resumes
from suspending. But it didn't check that the battery exists. This
will cause battery sysfs files added when the battery doesn't exist.
This patch add the check before refreshing.

	https://bugzilla.kernel.org/show_bug.cgi?id=35642

Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2011-07-14 00:05:45 -04:00
Lan Tianyu
d5a5911b32 ACPI / Battery: Add the hibernation process in the battery_notify()
The Commit 25be58215 has added a PM notifier to refresh the sys in order
to deal with the unit change of the Battery Present Rate. But it just
consided the suspend situation. The problem also will happen during the
hibernation according the bug 28192.

    https://bugzilla.kernel.org/show_bug.cgi?id=28192

This patch adds the hibernation process and fix the bug.

Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2011-07-14 00:05:27 -04:00
Lan Tianyu
7b78622d0f ACPI / Battery: Rename acpi_battery_quirks2 with acpi_battery_quirks
This patch is cosmetic only, and makes no functional change.
Since the acpi_battery_quirks has been deleted, rename
acpi_battery_quirks2 with acpi_battery_quirks to clean the code.

Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2011-07-14 00:04:57 -04:00
Lan Tianyu
55003b2105 ACPI / Battery: Change 16-bit signed negative battery current into correct value
This patch is for some machines which report the battery current
as a 16-bit signed negative when it is charging. This is caused
by DSDT bug. The commit bc76f90b8a
has resolved the problem for Acer laptops. But some other machines
also have such problem.

    https://bugzilla.kernel.org/show_bug.cgi?id=33722

Since it is improper that the current is above 32A on laptops
whether on AC or on battery, this patch is to check the current and
 take its absolute value as current and producing a message when it
is negative in s16.

Remove Acer quirk, as this workaround handles Acer too.

Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2011-07-14 00:04:41 -04:00
Lan Tianyu
ae6f618704 ACPI / Battery: Add the power unit macro
This patch is cosmetic only, and makes no functional change.

Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2011-07-14 00:04:12 -04:00
Lan Tianyu
e4108292cc ACPI / SBS: Correct the value of power_now and power_avg in the sysfs
https://bugzilla.kernel.org/show_bug.cgi?id=24492

Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2011-07-14 00:01:34 -04:00
Lan Tianyu
1dd5c715e5 ACPI / SBS: Add getting state operation in the acpi_sbs_battery_get_property()
https://bugzilla.kernel.org/show_bug.cgi?id=24492

Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2011-07-14 00:01:26 -04:00
Lin Ming
b4a03b9aa9 ACPI: Fixes device power states array overflow
Commit 28c2103 added new state ACPI_STATE_D3_COLD, so the device power
states array must be expanded by one also.

v2: Use ACPI_D_STATE_COUNT instead of number 5 for the array size.

Reported-by: Dan Carpenter <error27@gmail.com>
Suggested-by: Oldřich Jedlička <oldium.pro@seznam.cz>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2011-07-13 23:53:22 -04:00