Commit graph

299,176 commits

Author SHA1 Message Date
Uwe Kleine-König
4daca0e017 ARM: mxs/tx28: convert to new leds-gpio registration helper
This allows to move the led definition to .init.rodata.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07 09:59:57 +02:00
Uwe Kleine-König
5b8d628ca4 ARM: mx5: convert to new leds-gpio registration helper
This gets rid of per machine struct platform_device definitions and allows
to move the platform data and led definition to .init.rodata.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07 09:59:57 +02:00
Uwe Kleine-König
47e837b54c ARM: imx: convert to new leds-gpio registration helper
This gets rid of per machine struct platform_device definitions and allows
to move the platform data and led definition to .init.rodata.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07 09:59:57 +02:00
Fabio Estevam
72370a5cc2 ARM: mx5/mx51_babbage: Use gpio_request_array for USBH1 pins
Instead of using gpio_request followed by gpio_direction_output use gpio_request_array
when requesting multiple pins.

Also fixed the location of the delay for the reset and make the BABBAGE_USB_PHY_RESET to toggle.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07 09:59:56 +02:00
Fabio Estevam
2e7b1bfcb9 ARM: mx5/mx51_babbage: Move GPIO initialization for USB PHY Reset line to common place
The USB PHY Reset GPIO can be configured in the same place as the other GPIOs.

While at it rename the pin as BABBAGE_USB_PHY_RESET to make clearer its purpose.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07 09:59:56 +02:00
Troy Kisky
58f45e3c6f ARM: i.MX53: Fix IOMUX type o's
", o" was used for ", 0"

", 17" was used for ", 7 | 0x10"

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07 09:59:42 +02:00
Sascha Hauer
6584cb8825 ARM i.MX dma: Fix burstsize settings
dmaengine expects the maxburst parameter in words, not bytes.
The imxdma driver and its users do this wrong. Fix this.

As a side note the imx-pcm-dma-mx2 driver was 'fixed' to work
with imx-dma. This broke the driver with imx-sdma support which
correctly takes the maxburst parameter in words. This patch
puts the sdma based sound back to work.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07 09:55:50 +02:00
Ben Skeggs
d61a06862b drm/kms: allow drm_mode_group with no objects
Sometimes we could be controlling a device (such as an NVIDIA Tesla) that
has no crtcs/encoders/connectors.

One could argue that the driver should unset DRIVER_MODESET in this case,
but that changes a whole heap of the DRM's other behaviours, and it's much
easier to just be a modesetting driver without any outputs.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-07-07 17:49:00 +10:00
Jerome Glisse
ccd6895d40 drm/radeon/kms: free ib pool on module unloading
ib pool weren't free for various newer asic on module unload.
This doesn't cause much arm but still could be candidate for
stable.

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
cc: stable@kernel.org
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-07-07 17:48:27 +10:00
Alex Deucher
37cba6c6f4 drm/radeon/kms: fix typo in evergreen disp int status register
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-07-07 17:47:44 +10:00
Alex Deucher
fcb857abc4 drm/radeon/kms: fix typo in IH_CNTL swap bitfield
Only affects BE systems.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-07-07 17:47:12 +10:00
Takashi Iwai
c2d986b0d2 ALSA: hda - Clean-up PCM assignments in patch_realtek.c
Instead of assigning each default hda_pcm_stream pointers, do NULL-checks
and assign default values in alc_build_pcms().

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 09:35:17 +02:00
Takashi Iwai
f970de2555 ALSA: hda - Unify alc*_auto_init_input_src() in patch_realtek.c
The only different implmentation was alc880_auto_init_input_src(),
and now it covers this variant, and we can use the single function
for all codecs.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 09:35:14 +02:00
Takashi Iwai
d6cc9fabd5 ALSA: hda - Parse ADCs and CAPSRCs dynamically for Realtek auto-parser
Now with the new code for looking for ADCs and MUXs, we can replace
the whole ADC assignment with the parsed results.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 09:34:46 +02:00
Takashi Iwai
0a7f532090 ALSA: hda - Unify alc_auto_init_analog_input() calls
All alc*_auto_init_analog_input() calls are identical, so let's use
the same function more clearly without aliases.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 09:31:25 +02:00
Takashi Iwai
b78217096b ALSA: hda - Parse ADCs in alc_auto_create_input_ctls()
Parse ADCs and cap-srcs in alc_auto_create_input_ctls() by itself
instead of passing explicitly from the caller.  By this change, all
alc*_auto_create_input_ctls() can be unified to the same calls.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 09:31:21 +02:00
Takashi Iwai
343a04be37 ALSA: hda - Code consolidation for ALC88x and ALC662 auto-parsers
Use the same common code for auto-parsing the output paths and their
initializations, based on the existing ALC662 code, which is smarter
than the old ALC880/2 code.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 09:31:18 +02:00
Takashi Iwai
97aaab7b49 ALSA: hda - Create bind-mutes appropriately for ALC662 auto-parser
When multiple inputs are present on the mixer widget (typically a DAC
and a loopback), mute/unmute both inputs with the corresponding mixer
element.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 09:31:15 +02:00
Takashi Iwai
cd51155676 ALSA: hda - Initialize DACs in ALC662 auto-parser mode
The initialization of DACs was missing in ALC662 parser code.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 09:31:13 +02:00
Takashi Iwai
bb8bf4d40c ALSA: hda - Parse HP and speaker DACs even for multi connections for ALC662
In alc662_auto_fill_dac_nids(), the HP and speaker DACs aren't parsed
when the corresponding pins aren't fixed with single DACs.
Now check these DACs even for non-fixed pins.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 09:31:09 +02:00
stephen hemminger
5a9d69179f skge: update version
Update version number, and take "New" off the config information
since old sk98lin has been gone for a couple years.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-07 00:30:09 -07:00
stephen hemminger
57d6fa37f5 skge: make support for old Genesis chips optional
The GENESIS boards are really old PCI-X boards that are rare.
Marvell has dropped support for this hardware and there is no reason
for most users to have to have this code.

Rather than riddling code with ifdef's make one macro and let
the compiler do the dead code elimination.  This saves about 15%
of the text size.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-07 00:30:04 -07:00
stephen hemminger
c074304c2b add pci-id for DGE-530T
See also: https://bugzilla.kernel.org/show_bug.cgi?id=38862

Reported-by: jameshenderson@ruggedcom.com

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-07 00:29:32 -07:00
stephen hemminger
6f7d32f41e skge: cleanup pci id table
The PCI table was using mix of defines for device id and hard coded
hex values. This patch change it to all hex values. It also adds
comments based on the names provided in the vendor driver table.

There is NO CHANGE to the actual resulting table.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-07 00:29:31 -07:00
Takashi Iwai
8e89995c58 Merge branch 'fix/hda' into topic/hda 2011-07-07 09:28:47 +02:00
Shan Wei
d804c6f212 net: doc: fix compile warning of no format arguments in ifenslave.c
Fix following warning in ifenslave.c with gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu4).

Documentation/networking/ifenslave.c:263:4: warning: format not a string literal and no format arguments
Documentation/networking/ifenslave.c:271:3: warning: format not a string literal and no format arguments
Documentation/networking/ifenslave.c:277:3: warning: format not a string literal and no format arguments
Documentation/networking/ifenslave.c:285:3: warning: format not a string literal and no format arguments
Documentation/networking/ifenslave.c:291:3: warning: format not a string literal and no format arguments
Documentation/networking/ifenslave.c:292:3: warning: format not a string literal and no format arguments
Documentation/networking/ifenslave.c:312:4: warning: format not a string literal and no format arguments
Documentation/networking/ifenslave.c:323:3: warning: format not a string literal and no format arguments
Documentation/networking/ifenslave.c:342:4: warning: format not a string literal and no format arguments


Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-07 00:27:49 -07:00
Eric Dumazet
f03d78db65 net: refine {udp|tcp|sctp}_mem limits
Current tcp/udp/sctp global memory limits are not taking into account
hugepages allocations, and allow 50% of ram to be used by buffers of a
single protocol [ not counting space used by sockets / inodes ...]

Lets use nr_free_buffer_pages() and allow a default of 1/8 of kernel ram
per protocol, and a minimum of 128 pages.
Heavy duty machines sysadmins probably need to tweak limits anyway.


References: https://bugzilla.stlinux.com/show_bug.cgi?id=38032
Reported-by: starlight <starlight@binnacle.cx>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-07 00:27:05 -07:00
Shan Wei
fa917ff739 net: fix warning of versioncheck
net-next-2.6/drivers/net/bnx2x/bnx2x_sp.c: 19 linux/version.h not needed.
net-next-2.6/drivers/net/caif/caif_hsi.c: 9 linux/version.h not needed.

Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-07 00:26:31 -07:00
Takashi Iwai
9c7a083d94 ALSA: hda - Change all ADCs for dual-adc switching mode for Realtek
When the dual-adc switching mode is active in Realtek auto-parser,
we need to couple all ADCs as a single capture-volume.  Currently, the
volume control changes only the first ADC, thus others may remain silent.
This patch fixes the problem.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 09:25:54 +02:00
Shreyas Bhatewara
eebb02b1f0 vmxnet3: round down # of queues to power of two
vmxnet3 device supports only power-of-two number of queues. The driver
therefore needs to check this and rounds down the number of queues to the
nearest power of two.

Signed-off-by: Yong Wang <yongwang@vmware.com>
Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com>
Reviewed-by: Dmitry Torokhov <dtor@vmware.com>
2011-07-07 00:25:52 -07:00
Lothar Waßmann
9d73242458 mach-mx5: fix the I2C clock parents
The clock from which the I2C timing is derived is the ipg_perclk not ipg_clk.

I2C bus frequency was lower by a factor of ~8 due to the clock divider
calculation being based on 66.5MHz IPG clock while the bus actually
uses 8MHz ipg_perclk.

Kernel version: 3.0.0-rc2 branch 'imx-for-next' of git://git.pengutronix.de/git/imx/linux-2.6

Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07 09:07:46 +02:00
Uwe Kleine-König
23e99d4cae ARM: mxs/tx28: according to the TX28's datasheet D4-D7 are not used for MMC0
The pins are actually used (not in mainline yet):

	D4 -> SSP2_D0
	D5 -> GPIO
	D6 -> GPIO
	D7 -> GPIO for owire

so their pinmapping for SSP0 is wrong.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07 09:07:45 +02:00
Axel Lin
b9b65860e7 ARM i.MX23/28: platform-mxsfb: Add missing include of linux/dma-mapping.h
Fix below build error:
  CC      arch/arm/mach-mxs/devices/platform-mxsfb.o
arch/arm/mach-mxs/devices/platform-mxsfb.c: In function 'mx23_add_mxsfb':
arch/arm/mach-mxs/devices/platform-mxsfb.c:27: error: implicit declaration of function 'DMA_BIT_MASK'
make[2]: *** [arch/arm/mach-mxs/devices/platform-mxsfb.o] Error 1
make[1]: *** [arch/arm/mach-mxs/devices] Error 2
make: *** [arch/arm/mach-mxs] Error 2

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07 09:07:43 +02:00
Fabio Estevam
d7336b837f ARM: mx53: Fix some interrupts marked as reserved.
Mark the actual interrupt source for some interrupts currently marked as reserved.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07 09:07:42 +02:00
Troy Kisky
425933b30b MXC: iomux-v3: correct NO_PAD_CTRL definition
iomux-v3.c uses NO_PAD_CTRL as a 32 bit value
so it should not be shifted left by MUX_PAD_CTRL_SHIFT(41)

Previously, anything requesting NO_PAD_CTRL would get
their pad control register set to 0.

Since it is a pad control mask, place it with the other mask values.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Acked-by: Lothar Waßmann <LW@KARO-electronics.de>
Tested-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07 09:07:41 +02:00
Fabio Estevam
429a035d1d ARM: mx51: Fix the address space length for SSI
On MX51 the address space length for SSI is 16KB.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07 09:07:39 +02:00
Shawn Guo
187e5f26a8 ARM: mxc: imx-dma on imx25 has no other TO version but TO1
The imx25 sdma script only gets TO1 version, so there is no need
to encode "to1" in the variable name.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07 09:07:38 +02:00
Shawn Guo
ee8814db96 ARM: mxc: change imx-dma default to_version to 1
The value 0 is not a valid TO version number.  With the current
code, imx-sdma driver will try to load firmware sdma-imx25-to0.bin,
which is obviously not a good name.  Instead, sdma-imx25-to1.bin
makes much more sense.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07 09:07:37 +02:00
Shawn Guo
aa5f380cb0 ARM: mxc: sdma on imx25 is a V2 block
The sdma on soc imx25 is not a V1 but V2 block.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07 09:07:36 +02:00
Shawn Guo
420766a97a ARM: mxc: imx-sdma device gets 16K iosize than 4K
The sdma on all imx soc gets 16K IO space not 4K.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07 09:07:34 +02:00
Fabio Estevam
6cecabb391 ARM: mxc: iomux-v1: Fix build warning
Fix the following warning:

CC      arch/arm/plat-mxc/iomux-v1.o
arch/arm/plat-mxc/iomux-v1.c: In function 'mxc_gpio_setup_multiple_pins':
arch/arm/plat-mxc/iomux-v1.c:160: warning: 'ret' may be used uninitialized in this function
arch/arm/plat-mxc/iomux-v1.c:160: note: 'ret' was declared here

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07 09:07:33 +02:00
Fabio Estevam
aec250dc12 ARM: mach-imx/mx27_3ds: Fix regulator support
Fix the 2.8V (VMMC1) and 1.8V (VGEN) voltage generation on mx27_3ds.

Also configure the IOMUX for the PMIC interrupt pin and for the CSPI chip select that is connected
to the MC13783 PMIC.

In order to get the voltage for the LCD (2.8V and 1.8V) it is also necessary to turn on GPO1 and GPO3
supplies because they are connected to switches that enable these two voltages.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07 09:07:30 +02:00
Fabio Estevam
581f84e24b mxc: iomuxv1: Do not use gpio_request when setting the pin as GPIO
When setting the IOMUX of multiple pins via mxc_gpio_setup_multiple_pins, gpio_request
is called and this prevents subsequent calls of gpio_request done by drivers to succeed.

Remove gpio_request call from mxc_gpio_setup_multiple_pins function.

As gpio_request is removed from mxc_gpio_setup_multiple_pins, there is no need to have
mxc_gpio_release_multiple_pins anymore, so remove this function.

Tested on a mx27_3ds board and after applying this patch it is possible to define all the
IOMUX setup in a static array

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07 09:06:58 +02:00
Fabio Estevam
b2a08e3e46 ARM: mach-imx/mx31_3ds: Fix IOMUX for SPI1 signals
Original code was assuming that the CSPI1 pins on the
MX31PDK were the primary pin function, which is incorrect.

On MX31PDK board these are the pins that provide CSPI1 functionality:

DSR_DCE1 (ALT mode 1) --> CSPI1_CLK
RI_DCE1 (ALT mode 1) --> CSPI1_RDY

DTR_DTE1  -->CSI1_MOSI
DSR_DTE1 --> CSPI1_MISO
DTR_DCE2 ---> CSPI1_SS2

The 3 IOMUX settings above are done via GPR as per Table A-1 of the MX31RM.

This patch fixes the CSPI1 IOMUX and makes the LCD to be functional.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07 09:06:57 +02:00
Fabio Estevam
98618cfe22 ARM: mach-imx/mx27_3ds: Use the standard i.MX macro for GPIO numbering
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07 09:06:53 +02:00
Marc Kleine-Budde
9333d8731f ARM: mx53: Fix the base addresses for the DDR memory regions
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07 08:45:04 +02:00
Fabio Estevam
2aee401e03 ARM: mx53: Fix the chip select addresses
MX53 has 4 chip selects (CS0 - CS3) and the valid combinations are:

- CS0 (128MB)
- CS0 (64MB), CS1 (64MB)
- CS0 (64MB), CS1 (32MB), CS2 (32MB)
- CS0 (32MB), CS1 (32MB), CS2 (32MB) , CS3 (32MB)

Fix these addresses and also take into account all the four possibilities.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07 08:45:03 +02:00
Fabio Estevam
f2abaae42e ARM: mx53: Fix alternate modes for MX53_PAD_PATA_DATA6
MX53_PAD_PATA_DATA6 can have the following alternate modes:

PATA_DATA_6:  		mode 0
GPIO2_6:		mode 1
EMI_NANDF_D_6:		mode 3
ESDHC4_DAT6		mode 4
GPU3d_GPU_DEBUG_OUT_6	mode 5
IPU_DIAG_BUS_6		mode 6

Fix the modes accordingly.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Dinh Nguyen <dinh.nguyen@freescale.com>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07 08:45:01 +02:00
Fabio Estevam
38c7364917 mx51: Let USB Storage be built by default
Let USB Storage be built by default.

Also select NLS_ISO8859 so that the USB device can be mounted.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07 08:45:00 +02:00
Shawn Guo
9bb7fa1e65 ARM: mxs_defconfig: Change CONFIG_RTC_CLASS 'm' to 'y'
The patch fixes the warning below.

arch/arm/configs/mxs_defconfig:92:warning: symbol value 'm' invalid for RTC_CLASS

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07 08:44:58 +02:00