Commit graph

299,176 commits

Author SHA1 Message Date
Peter Korsgaard
c25ded1fbc mach-s3c2410: remove unused spi-gpio.h file
Not used anymore as the spi_s3c24xx_gpio driver is gone (replaced by
the generic spi-gpio).

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Acked-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-04 10:53:04 -06:00
Peter Korsgaard
45fae7def6 spi: remove obsolete spi-s3c24xx-gpio driver
It was equivalent to spi-gpio, and there's no longer any in-tree users
of it, so get rid of it.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Acked-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-04 10:52:58 -06:00
Peter Korsgaard
947b35d52d mach-gta2: remove unused spi-gpio.h include
Not needed, and the file is going away.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Acked-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-04 10:52:54 -06:00
Peter Korsgaard
aa35316922 mach-qt2410: convert to spi_gpio
Rather than the deprecated spi_s3c24xx_gpio driver.

Only compile tested. Notice that the board support seems quite broken
as the spi_s3c24xx_gpio platform device name was misspelled and there
is no struct spi_board_info defined, but this atleast didn't make it
any worse.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Acked-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-04 10:52:49 -06:00
Peter Korsgaard
932036ce03 mach-jive: convert to spi_gpio
Rather than the deprecated spi_s3c24xx_gpio driver. Compile tested only.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Acked-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-04 10:51:58 -06:00
Misael Lopez Cruz
1a4cdecec7 OMAP4: SDP4430: Add twl6040 codec platform support
Configure, and enable the twl6040 codec on SDP4430.

Signed-off-by: Misael Lopez Cruz <misael.lopez@ti.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
2011-07-04 19:36:30 +03:00
Axel Castaneda Gonzalez
1fbe99529d ASoC: twl6040: Configure ramp step based on platform
Enable ramp down/up step to be configured based on
platform.

Signed-off-by: Axel Castaneda Gonzalez <x0055901@ti.com>
Signed-off-by: Misael Lopez Cruz <misael.lopez@ti.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-04 19:36:29 +03:00
Liam Girdwood
f7026c9996 ASoC: twl6040: set default constraints.
Set default sysclk constraints to high performance mode.

Signed-off-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-04 19:36:28 +03:00
Misael Lopez Cruz
6bba63b68d ASoC: twl6040: Remove pll and headset mode dependency
Remove dependency between pll (hppll, lppll) and headset power
mode (low-power, high-performance), as headset power mode can
be used with any pll.

A new control is created to allow headset power mode configuration
from userspace. Changing headset power mode during earpiece related
usecases is not propagated down to the codec as earpiece requires
HS DAC in HP mode.

Signed-off-by: Misael Lopez Cruz <misael.lopez@ti.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-04 19:36:27 +03:00
Liam Girdwood
e17e4ab801 ASoC: twl6040: Support other sample rates in constraints.
Add other supported sample rates to LP and HP modes.

Signed-off-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-04 19:36:26 +03:00
Liam Girdwood
6510bdc3f4 ASoC: twl6040: add all ABE DAIs
Add all DAIs to fully support OMAP4 ABE.

Signed-off-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-04 19:36:25 +03:00
Peter Ujfalusi
87b25c1bab OMAP4: SDP4430: Add twl6040 vibrator platform support
Add twl4030_vibra platform data, and the needed regulators
for twl6040 vibrator.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
2011-07-04 19:36:24 +03:00
Misael Lopez Cruz
cc697d3839 input: Add initial support for TWL6040 vibrator
Add twl6040_vibra as a child of MFD device twl6040_codec. This
implementation covers the PCM-to-PWM mode of TWL6040 vibrator
module.

Signed-off-by: Misael Lopez Cruz <misael.lopez@ti.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
CC: Tejun Heo <tj@kernel.org>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-04 19:36:18 +03:00
Peter Ujfalusi
6c44863763 MFD: twl6040: Change platform data for soc codec driver
Pass twl4030_codec_data instead of the twl4030_audio_data
for the ASoC codec driver.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-04 19:35:07 +03:00
Misael Lopez Cruz
fb34d3d505 ASoC: twl6040: Convert into TWL6040 MFD child
Convert TWL6040 CODEC driver into a TWL6040 MFD child, it implies
that MFD-level operations like register accesses, clock setting
and power management are done through MFD APIs, not directly by
CODEC driver anymore. To avoid conflicts with the other MFD child,
vibrator registers are skipped in CODEC driver.

Signed-off-by: Misael Lopez Cruz <misael.lopez@ti.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-04 19:35:06 +03:00
Misael Lopez Cruz
f19b2823f8 mfd: twl6040: Add initial support
TWL6040 IC provides analog high-end audio codec functions for
handset applications. It contains several audio analog inputs
and outputs as well as vibrator support. It's connected to the
host processor via PDM interface for audio data communication.
The audio modules are controlled by internal registers that
can be accessed by I2C and PDM interface.

TWL6040 MFD will be registered as a child of TWL-CORE, and will
have two children of its own: twl6040-codec and twl6040-vibra.

This driver is based on TWL4030 and WM8350 MFD drivers.

Signed-off-by: Misael Lopez Cruz <misael.lopez@ti.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-04 19:34:37 +03:00
Mark Brown
5de705194e regulator: Add basic per consumer debugfs
Report the requested load and voltage for each consumer in debugfs when it
is enabled.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-07-04 17:09:28 +01:00
Mark Brown
469bb638dc Merge branch 'for-3.0' into for-3.1 2011-07-04 08:54:40 -07:00
Mark Brown
8e9ddf811b ASoC: Ensure we delay long enough for WM8994 FLL to lock when starting
This delay is very conservative.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Cc: stable@kernel.org
2011-07-04 08:51:44 -07:00
Stephen Warren
b5f9cfed12 ASoC: Tegra: I2S: s/clk_get_sys/clk_get/
The clock needed by the I2S driver is associated with the I2S device name
in the standard fashion. Hence, use clk_get(dev) instead of clk_get_sys(clk_name).

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-04 08:49:24 -07:00
Stephen Warren
713d136978 ASoC: Tegra: I2S: Ensure clock is enabled when writing regs
The I2S controller needs a clock to respond to register writes. Without
this, register writes will at worst hang the CPU. In practice, I've only
observed writes being dropped.

Luckily, the dropped register writes historically had no effect:

TEGRA_I2S_TIMING: The value we wrote was the reset default.

TEGRA_I2S_FIFO_SCR: The default was for the FIFOs to request more data
when one slot was empty. The requested value was for the FIFOs to request
when four slots were empty. The DMA controller in the mainline kernel is
configured to burst a single entry at a time into the FIFO, hence there
was no issue. The only negative effect was on bus efficiency losses due
to an increased number of arbitration attempts.

However, in various non-upstream changes, the DMA controller now bursts
four entries at a time into the FIFO. If there is only space for one
entry, the data is simply dropped. In practice, this resulted in 3/4 of
samples being dropped, and playback at 4x the expected rate and pitch.
By fixing the clocking issue, this is solved.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-04 08:49:05 -07:00
Peter Ujfalusi
4ae6df5e10 MFD: twl4030-audio: Rename platform data
Allign the platform data names for twl4030 audio submodule:
twl4030_audio_data: for the core MFD driver
twl4030_codec_data: for ASoC codec driver
twl4030_vibra_data: for the input/ForceFeedback driver

To avoid breakage, change all depending drivers, files
to use the new types.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-04 18:44:02 +03:00
Peter Ujfalusi
57fe7251f5 MFD: twl4030-codec -> twl4030-audio: Rename the driver
Rename the driver, and header file from twl4030-codec to
twl4030-audio.
To avoid breakage change depending drivers at the same time.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
CC: Misael Lopez Cruz <misael.lopez@ti.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-04 18:43:56 +03:00
Peter Ujfalusi
4fe5668b73 MFD: twl4030-codec: Rename internals from codec to audio
In preparation of renaming the driver from twl4030-codec
to twl4030-audio, first do some clean ups in the driver,
which does not cause any problems outside.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-04 18:43:51 +03:00
Peter Ujfalusi
b252b0efb6 OMAP3: Move common regulator configuration to twl-common
Some regulator config can be moved out from board files,
since they are close to identical.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
2011-07-04 18:43:43 +03:00
Peter Ujfalusi
827ed9aef2 OMAP3: Move common twl configuration to twl-common
Reduce the amount of duplicated code by moving the common
configuration for twl4030/5030/tpsxx to the twl-common file.
Use the omap3_pmic_get_config function from board files to
properly configure the PMIC with the common fields.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
2011-07-04 18:43:38 +03:00
Peter Ujfalusi
b22f954bae OMAP4: Move common twl6030 configuration to twl-common
Reduce the amount of duplicated code by moving the common
configuration for TWL6030 (on OMAP4 platform) to the
twl-common file.
Use the omap4_pmic_get_config function from board files to
properly configure the PMIC with the common fields.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
2011-07-04 18:43:33 +03:00
Peter Ujfalusi
a53b8e3b99 OMAP: New twl-common for common TWL configuration
Introduce a new file, which will be used to configure
common pmic (TWL) devices, regulators, and TWL audio.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
2011-07-04 18:43:27 +03:00
Takashi Iwai
bac4b92cf7 ALSA: hda - Don't add aa-mix for VIA surrounds
Since we now route the front DAC via aa-mix widget, adding the aa-mix
to surrounds will result in a mix-up of both front and surround PCM
signals.  For avoiding this, the aa-mix routes have to be disabled
for surround paths.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-04 17:37:57 +02:00
Tony Lindgren
fdcc205fb9 Merge branch 'iommu-for-tony' of git://github.com/ohadbc/omap-iommu into devel-fixes 2011-07-04 07:40:05 -07:00
Dmitry Torokhov
cca8edfd2e Input: sh_keysc - fix compile warning
The "#if" above should really be an "#ifdef" to avoid this warning:

  CC      drivers/input/keyboard/sh_keysc.o
drivers/input/keyboard/sh_keysc.c:294:5: warning: "CONFIG_PM_SLEEP" is
not defined

Reported-by: Magnus Damm <magnus.damm@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-04 07:12:26 -07:00
Takashi Iwai
18bd2c44b9 ALSA: hda - Create HP-vol control properly for VIA codecs
When the individual DAC is available for the headphone output, the driver
should create the DAC for its volume control.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-04 15:55:44 +02:00
Takashi Iwai
de6c74f3e3 ALSA: hda - Define some constants in patch_via.c
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-04 14:53:30 +02:00
Lydia Wang
b89596a160 ALSA: hda - Fix invalid multi-channel amplifiers for VT1718S
For VT1718S, the multi-channel path should be like following:
DAC 0-->Mixer 9(index 5)-->Mixer 0(index 1)-->Front Pin;
DAC 1-->Mixer 1(index 0)-->Surround Pin;
DAC 2-->C/LFE Pin;
DAC 3-->Mixer 2(index 0)-->Side Pin;

But current code built Surround and Side path through index 1 of
Mixer 1 and 2. So Adjusting Surround and Side channel amplifier is
invalid. This patch fixes the issue.

Signed-off-by: Lydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-04 14:53:25 +02:00
Lydia Wang
c4394f5b80 ALSA: hda - Fix issue that front can't output sound for VT1718S
For VT1718S, Mixer 9 doesn't expose the connection to DAC 0. So when
building up a 'PCM Playback' amplifier control, it will fail since
getting DAC 0 index of Mixer 9 returned -1. So I added a dac_mixer_idx
to indicated the actual index of DAC 0 to Mixer 9. Following is the
patch and next mail is another.

Signed-off-by: Lydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-04 14:33:23 +02:00
Ohad Ben-Cohen
fee17d4fdf OMAP4: iommu: fix clock name
0e43327 "OMAP4: clock: Fix clock names and align with hwmod names"
renamed ducati_ick to ipu_fck.

Update OMAP4's iommu_device accordingly, so that omap_iommu_probe
doesn't break when calling clk_get.

Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2011-07-04 15:08:06 +03:00
Ohad Ben-Cohen
66cf402bd9 omap: iovmm: s/sg_dma_len(sg)/sg->length/
iovmm is erroneously using sg_dma_len with unmapped (DMA API-wise)
SG entries, and will break if CONFIG_NEED_SG_DMA_LENGTH is enabled.

Fix that by using sg->length instead.

Reported-by: Russell King <linux@arm.linux.org.uk>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2011-07-04 15:07:58 +03:00
Suman Anna
7e20b6f39a omap: iommu: fix pte programming
Fix the pte programming to set the page attributes correctly
by replacing the bitwise check with an explicit values check.

Otherwise, 16MB entries will be erroneously programmed like
4KB entries, which is not what the hardware expects.

Signed-off-by: Suman Anna <s-anna@ti.com>
Acked-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2011-07-04 15:07:45 +03:00
Jan Glauber
e3b4f515c4 crypto: s390 - support hardware accelerated SHA-224
On recent s390 machines hardware acceleration is available for SHA-256.
SHA-224 is based on SHA-256 so it can also be accelerated by hardware.
Do this by adding the proper algorithm description and initialization.

Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-07-04 20:06:01 +08:00
Igor Grinberg
be741de16f arm: omap3: cm-t35: fix slow path warning
Fix warning issued by gpio_set_value() call with TPS gpios.

Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-07-04 04:15:29 -07:00
Igor Grinberg
d12c2e2890 arm: omap3: cm-t35: minor comments fixes
Update authors and copyright, remove Free S/W Foundation postal address,
fix offsets of NAND partitions in comments.

Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-07-04 04:15:29 -07:00
Charulatha V
4e9642528c omap: ZOOM: QUART: Request reset GPIO
Reset GPIO (OMAP_GPIO_152) for QUART in zoom2/zoom3 debug-board is
not requested at all. This would lead to problems if this GPIO is
wrongly requested. Hence request OMAP GPIO 152 for QUART RESET but
do not apply a reset pulse as it would reset QUART and
disturb the QUART settings.

Signed-off-by: Charulatha V <charu@ti.com>
Acked-by: Kevin Hilman <khilman@ti.com>
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-07-04 04:11:08 -07:00
Daniel Mack
e47c3c0c10 omap: Overo: remove duplicate call to overo_ads7846_init()
overo_ads7846_init() is already called from overo_spi_init(), and
calling it twice is not only unnecessary but causes a warning as
"reg-fixed-voltage.1" is already added to the device tree.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Tested-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-07-04 04:11:08 -07:00
Silesh C V
5e4698fc44 omap: HSMMC: Fix GPIO muxing
Use generic gpio call to check the validity of the gpio. Note that
this includes gpio 0 also which was missing before.

Signed-off-by: Silesh C V <silesh@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-07-04 04:11:08 -07:00
Ambresh K
ba50348434 OMAP4: DMTIMER: enable autoidle mode
Currently autoidle is only enabled for OMAP2/3; by enabling autoidle,
the automatic L4 clock gating strategy is applied based on L4 activity,
otherwise L4 clock to module will be a free running.

Signed-off-by: Ambresh K <ambresh@ti.com>
[tony@atomide.com: updated for timer init changes]
Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-07-04 04:11:08 -07:00
Julia Lawall
f6281f6684 arch/arm/mach-omap2/clock.c: add missing clk_put
Add missing call to clk_put.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@r exists@
expression e1,e2;
statement S;
@@

e1 = clk_get@p1(...);
... when != e1 = e2
    when != clk_put(e1)
    when any
if (...) { ... when != clk_put(e1)
               when != if (...) { ... clk_put(e1) ... }
* return@p3 ...;
 } else S
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Acked-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-07-04 04:08:10 -07:00
Janusz Krzysztofik
07ad6ab3d7 omap: drop __initdata tags from static struct platform_device declarations
Pointers to statically declared platform device structures which are
registered with platform_device_register() are then used during run time
to access these structure members, for example from platform_uevent()
and much more. Therefore, these structures should never be placed inside
sections which are dropped after boot. Fix platform devices incorrectly
tagged with __initdata which happen to exist inside OMAP sub-trees.

This bug has exhibited itself on my ARM/OMAP1 based Amstrad Delta
videophone after commit 6d3163ce86, "mm:
check if any page in a pageblock is reserved before marking it
MIGRATE_RESERVE", resulting in reading from several
/sys/device/platform/*/uevent files always ending up with segmentation
faults.

Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Acked-by: Felipe Balbi <balbi@ti.com>
Cc: Varadarajan, Charulatha <charu@ti.com>
Cc: Jarkko Nikula <jhnikula@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-07-04 03:56:15 -07:00
Ingo Molnar
9f8b6a6cf0 Merge branch 'core' of git://git.kernel.org/pub/scm/linux/kernel/git/rric/oprofile into perf/core 2011-07-04 12:27:28 +02:00
Iiro Valkonen
a93d4f2d02 Input: atmel_mxt_ts - handle objects with multiple instances correctly
Handle the objects with multiple instances correctly when the configuration
data is loaded.

Signed-off-by: Iiro Valkonen <iiro.valkonen@atmel.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-04 03:19:20 -07:00
Iiro Valkonen
81c88a711a Input: atmel_mxt_ts - update object list
Update the object list to include new objects, and add unique identifiers
so we can distinguish between old & new generation of the same object.

Signed-off-by: Iiro Valkonen <iiro.valkonen@atmel.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-04 03:19:11 -07:00