lx_state must be used to reflect controller power state only and not
bus state. Thus add a flag to track state during bus suspend.
Signed-off-by: Gregory Herrero <gregory.herrero@intel.com>
Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com>
Tested-by: Robert Baldyga <r.baldyga@samsung.com>
Tested-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Tested-by: John Youn <johnyoun@synopsys.com>
Acked-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
port resume sequence may be used in different places. Create a
function to handle it. Make hprt0 read-modify-write atomic and
clear HPRT0_SUSP for both writes as it is a "read, write-set,
and self-clear (R_WS_SC)" bit. Since the lock is released
between the writes, read hprt0 again.
Since the phy clock is stopped in dwc2_port_suspend(), enable it
here and remove the PCGCTL write from dwc2_hcd_hub_control()
Signed-off-by: Gregory Herrero <gregory.herrero@intel.com>
Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com>
Tested-by: Robert Baldyga <r.baldyga@samsung.com>
Tested-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Tested-by: John Youn <johnyoun@synopsys.com>
Acked-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
When entering hibernation hprt0 must be read using dwc2_read_hprt0().
Otherwise, any set hprt0 status bits will be cleared when restoring
hprt0 on exit from hibernation.
Signed-off-by: Gregory Herrero <gregory.herrero@intel.com>
Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com>
Tested-by: Robert Baldyga <r.baldyga@samsung.com>
Tested-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Tested-by: John Youn <johnyoun@synopsys.com>
Acked-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
There's no need to document to_foo() macros, and the macro is
badly documented anyway. That removes this warning:
include/media/videobuf2-v4l2.h:43: warning: No description found for parameter 'vb'
While here, remove the parenthesis for container_of(). The
countainer_of() already have parenthesis inside it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The ->init_size() hook was introduced to let NAND controller drivers
support NAND devices that could not be described in the nand_ids table.
Since then, the core has added support for extended-id parsing and
full-id description, thus allowing to describe pretty much all existing
NANDs.
Moreover, this hook is not used by any mainline driver, and should not be
used by new drivers, because detecting the NAND chip is not something
controller specific.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
6910fa1 ("arm64: enable PTE type bit in the mask for pte_modify") fixes
a problem whereby a large block of PROT_NONE mapped memory is
incorrectly mapped as block descriptors when mprotect is called.
Unfortunately, a subtle bug was introduced by this fix to the THP logic.
If one mmaps a large block of memory, then faults it such that it is
collapsed into THPs; resulting calls to mprotect on this area of memory
will lead to incorrect table descriptors being written instead of block
descriptors. This is because pmd_modify calls pte_modify which is now
allowed to modify the type of the page table entry.
This patch reverts commit 6910fa16db, and
fixes the problem it was trying to address by adjusting PAGE_NONE to
represent a table entry. Thus no change in pte type is required when
moving from PROT_NONE to a different protection.
Fixes: 6910fa16db ("arm64: enable PTE type bit in the mask for pte_modify")
Cc: <stable@vger.kernel.org> # 4.0+
Cc: Feng Kan <fkan@apm.com>
Reported-by: Ganapatrao Kulkarni <Ganapatrao.Kulkarni@caviumnetworks.com>
Tested-by: Ganapatrao Kulkarni <gkulkarni@caviumnetworks.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Steve Capper <steve.capper@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
This patch fixes a timing window that causes a segfault.
The problem is that bd can remain NULL throughout the function
and then reference that NULL pointer if the bh->b_private starts
out NULL, then someone sets it to non-NULL inside the locking.
In that case, bd still needs to be set.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
include/media/videobuf2-core.h:112: warning: No description found for parameter 'get_dmabuf'
include/media/videobuf2-core.h:146: warning: No description found for parameter 'm'
include/media/videobuf2-core.h:146: warning: Excess struct/union/enum/typedef member 'mem_offset' description in 'vb2_plane'
There are still several warnings, but those are hard to fix,
as they're actually a bug at DocBook. Those should be fixed on
separate patches.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The sfc driver internally uses a time format based on 32-bit (unsigned)
seconds and 32-bit nanoseconds. This means it will overflow in 2106,
but the value we pass into it is a signed 32-bit tv_sec that already
overflows in 2038 to a negative value.
This patch changes the logic to use the lower 32 bits of the timespec64
tv_sec in efx_ptp_ns_to_s_ns, which will have the correct value beyond the overflow.
While this does not change any of the register values, it lets us
keep using the driver after we deprecate the use of the timespec type
in the kernel.
In the efx_ptp_process_times function, the change to use timespec64
is similar, in that the tv_sec portion is ignored anyway and we only
care about the nanosecond portion that remains unchanged.
Acked-by: Richard Cochran <richardcochran@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: John Stultz <john.stultz@linaro.org>
The pps_event_time uses two 'timespec' structures internally, which
suffer from the y2038 problem. The uses of this structure are
fairly self-contained in the pps code, so this replaces them all at
once.
Unfortunately, this includes the sfc ethernet driver aside from the
pps subsystem, so we change that one as well. Both touch the
same data structure, and there probably is no good way to split
the patch into smaller units.
Acked-by: Richard Cochran <richardcochran@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: John Stultz <john.stultz@linaro.org>
The sync_cmos_clock has one use of struct timespec, which we want to
eventually replace with timespec64 or similar in the kernel. There
is no way this one can overflow, but the conversion to timespec64
is trivial and has no other dependencies.
Acked-by: Richard Cochran <richardcochran@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: John Stultz <john.stultz@linaro.org>
There is exactly one caller of getnstime_raw_and_real in the kernel,
which is the pps_get_ts function. This changes the caller and
the implementation to work on timespec64 types rather than timespec,
to avoid the time_t overflow on 32-bit architectures.
For consistency with the other new functions (ktime_get_seconds,
ktime_get_real_*, ...), I'm renaming the function to
ktime_get_raw_and_real_ts64.
We still need to convert from the internal 64-bit type to 32 bit
types in the caller, but this conversion is now pushed out from
getnstime_raw_and_real to pps_get_ts. A follow-up patch changes
the remaining pps code to completely avoid the conversion.
Acked-by: Richard Cochran <richardcochran@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: John Stultz <john.stultz@linaro.org>
There is only one user of the hardpps function in the kernel, so
it makes sense to atomically change it over to using 64-bit
timestamps for y2038 safety. In the hardpps implementation,
we also need to change the pps_normtime structure, which is
similar to struct timespec and also requires a 64-bit
seconds portion.
This introduces two temporary variables in pps_kc_event() to
do the conversion, they will be removed again in the next step,
which seemed preferable to having a larger patch changing it
all at the same time.
Acked-by: Richard Cochran <richardcochran@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: John Stultz <john.stultz@linaro.org>
This was leftover from the legacy pxa2xx DMA implementation and not needed
anymore so remove it.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
There are some allocations that must be only referenced by 32-bit
offsets. To limit the chances of having the first 4GB already full,
objects not requiring this workaround use DRM_MM_SEARCH_BELOW/
DRM_MM_CREATE_TOP flags
In specific, any resource used with flat/heapless (0x00000000-0xfffff000)
General State Heap (GSH) or Instruction State Heap (ISH) must be in a
32-bit range, because the General State Offset and Instruction State
Offset are limited to 32-bits.
Objects must have EXEC_OBJECT_SUPPORTS_48B_ADDRESS flag to indicate if
they can be allocated above the 32-bit address range. To limit the
chances of having the first 4GB already full, objects will use
DRM_MM_SEARCH_BELOW + DRM_MM_CREATE_TOP flags when possible.
The libdrm user of the EXEC_OBJECT_SUPPORTS_48B_ADDRESS flag is here:
http://lists.freedesktop.org/archives/intel-gfx/2015-September/075836.html
v2: Changed flag logic from neeeds_32b, to supports_48b.
v3: Moved 48-bit support flag back to exec_object. (Chris, Daniel)
v4: Split pin flags into PIN_ZONE_4G and PIN_HIGH; update PIN_OFFSET_MASK
to use last PIN_ defined instead of hard-coded value; use correct limit
check in eb_vma_misplaced. (Chris)
v5: Don't touch PIN_OFFSET_MASK and update workaround comment (Chris)
v6: Apply pin-high for ggtt too (Chris)
v7: Handle simultaneous pin-high and pin-mappable end correctly (Akash)
Fix check for entries currently using +4GB addresses, use min_t and
other polish in object_bind_to_vm (Chris)
v8: Commit message updated to point to libdrm patch.
v9: vmas are allocated in the correct ozone, so only check flag when the
vma has not been allocated. (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v4)
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Due to flip interrupts GuC stays awake always and GT does not enter
RC6. Do not route those interrupts to GuC for now. Driver won't touch
DE_GUCRMR register and leave it as what default value.
Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Signed-off-by: Alex Dai <yu.dai@intel.com>
Reviewed-by: Tom O'Rourke <Tom.O'Rourke@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
v2: Use SKL_DPLLx symbolic names instead of raw numbers
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
To avoid deadlock described in commit 084b6e7c76 ("btrfs: Fix a
lockdep warning when running xfstest."), we should move kobj stuff out
of dev_replace lock range.
"It is because the btrfs_kobj_{add/rm}_device() will call memory
allocation with GFP_KERNEL,
which may flush fs page cache to free space, waiting for it self to do
the commit, causing the deadlock.
To solve the problem, move btrfs_kobj_{add/rm}_device() out of the
dev_replace lock range, also involing split the
btrfs_rm_dev_replace_srcdev() function into remove and free parts.
Now only btrfs_rm_dev_replace_remove_srcdev() is called in dev_replace
lock range, and kobj_{add/rm} and btrfs_rm_dev_replace_free_srcdev() are
called out of the lock range."
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
[added lockup description]
Signed-off-by: David Sterba <dsterba@suse.com>
Originally the message was not in a helper but ended up there. We should
print error messages from callers instead.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
[reworded subject and changelog]
Signed-off-by: David Sterba <dsterba@suse.com>
By general rule of thumb there shouldn't be any way that user land
could trigger a kernel operation just by sending wrong arguments.
Here do commit cleanups after user input has been verified.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This patch updates and renames btrfs_scratch_superblocks, (which is used
by the replace device thread), with those fixes from the scratch
superblock code section of btrfs_rm_device(). The fixes are:
Scratch all copies of superblock
Notify kobject that superblock has been changed
Update time on the device
So that btrfs_rm_device() can use the function
btrfs_scratch_superblocks() instead of its own scratch code. And further
replace deivce code which similarly releases device back to the system,
will have the fixes from the btrfs device delete.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
[renamed to btrfs_scratch_superblock]
Signed-off-by: David Sterba <dsterba@suse.com>
If i2c_new_dummy() fails in max77843_chg_init(), an PTR_ERR(NULL) is
returned which is 0. So the function was wrongly returning a success
value instead of an error code.
Cc: stable@vger.kernel.org # 4.1
Fixes: c7f585fe46 ("mfd: max77843: Add max77843 MFD driver core driver")
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Jim Davis reported the compilation error with a random configuration which
apparently has CONFIG_PM=y and CONFIG_PM_SLEEP=n. With that conditions we have
missed definition of INTEL_LPSS_SLEEP_PM_OPS macro. Add it here.
Reported-by: Jim Davis <jim.epost@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
This uses a chunk of code from btrfs_read_dev_super() and creates
a function called btrfs_read_dev_one_super() so that next patch
can use it for scratch superblock.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
[renamed bufhead to bh]
Signed-off-by: David Sterba <dsterba@suse.com>
Use btrfs specific error code BTRFS_ERROR_DEV_MISSING_NOT_FOUND instead
of -ENOENT. Next this removes the logging when user specifies "missing"
and we don't find it in the kernel device list. Logging are for system
events not for user input errors.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
__dm_destroy() takes io_barrier SRCU lock (dm_get_live_table) and
suspend_lock in reverse order. Doing so can cause AB-BA deadlock:
__dm_destroy dm_swap_table
---------------------------------------------------
mutex_lock(suspend_lock)
dm_get_live_table()
srcu_read_lock(io_barrier)
dm_sync_table()
synchronize_srcu(io_barrier)
.. waiting for dm_put_live_table()
mutex_lock(suspend_lock)
.. waiting for suspend_lock
Fix this by taking the locks in proper order.
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Fixes: ab7c7bb6f4 ("dm: hold suspend_lock while suspending device during device deletion")
Acked-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org
Chained irq handlers usually set up handler data as well. We now have
a function to set both under irq_desc->lock. Replace the two calls
with one.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Link: http://lkml.kernel.org/r/1443709604.12993.0.camel@ingics.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Remove unneeded variable val_indx.
Issue found by a static analyzer.
Reported-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support for ctr and xts encryption modes.
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fixes the following sparse warnings:
crypto/skcipher.c:94:5:
warning: symbol 'crypto_init_skcipher_ops_blkcipher'
was not declared. Should it be static?
crypto/skcipher.c:185:5:
warning: symbol 'crypto_init_skcipher_ops_ablkcipher'
was not declared. Should it be static?
Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
No authenc() ciphers are FIPS approved, nor is ecb(des).
After the end of 2015, ansi_cprng will also be non-approved.
Signed-off-by: John Haxby <john.haxby@oracle.com>
Acked-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The sahara driver use two dma_map_sg path according to SG are chained
or not.
Since dma_map_sg can handle both case, clean the code with all
references to sg chained.
Thus removing the sahara_sha_unmap_sg function.
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The caam driver use two dma_map_sg path according to SG are chained
or not.
Since dma_map_sg can handle both case, clean the code with all
references to sg chained.
Thus removing dma_map_sg_chained, dma_unmap_sg_chained
and __sg_count functions.
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The talitos driver use two dma_map_sg path
according to SG are chained or not.
Since dma_map_sg can handle both case, clean the code with all
references to sg chained.
Thus removing talitos_map_sg, talitos_unmap_sg_chain
and sg_count functions.
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Some code cleanups after crypto API changes:
- Change qat_algs_unregister to a void function to keep it consistent
with qat_asym_algs_unregister.
- Remove empty functions qat_algs_init & qat_algs_exit.
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
FEXPORT also marks the symbol as code using .type symbol, @function.
Without objdump -d will output only a hexdump for code following the
affected symbols.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Move the wakeup for the frame wait into the armada plane work, to
ensure that it is woken up every time we run a work.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Convert the overlay plane to use the generic armada plane worker
infrastructure which is shared with the primary plane.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Add a plane work implementation, and move the CRTC framebuffer flip
work to it for the primary plane. The idea is to have a common
plane work implementation for both the primary and overlay planes.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Both the CRTC and overlay frames have their own wait queues. It would
make more sense if these were part of the plane - the primary plane for
the CRTC and overlay plane for the overlay.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Move the locking for armada_drm_vbl_event_remove() into itself, which
makes this function symmetrical with armada_drm_vbl_event_add().
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
It is not necessary to write dplane->ctrl0 under the CRTC spinlock, as
this is only accessed under process context where the DRM locks will
protect us instead.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Move the write to clear the DMA enable bit, and augment it with clearing
the graphics enable bit for the primary plane.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
