Commit graph

563,629 commits

Author SHA1 Message Date
Thierry Reding
a33ee95f8f drm/bridge: Put Kconfig entries in a separate menu
Put the Kconfig entries for bridge drivers into a separate menu so that
they are automatically grouped and don't clutter up the top-level menu.

While at it, move the bridge menu towards the end of the top-level menu
where the panel menu is already located.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-08-14 21:35:36 +02:00
Heiko Schocher
58c467ece4 drm/panel: Add support for LG LG4573 480x800 4.3" panel
The LG4573 is used on the LG LCD LB043WV2-SD01, an industrial 4.3" TFT
panel with SPI control interface.

Signed-off-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-08-14 21:35:35 +02:00
Gary Bisson
a99fb6269d drm/panel: Add display timing for Okaya RS800480T-7X0GP
Add support for the Okaya RS800480T-7X0GP to the DRM simple panel
driver.

The RS800480T-7X0GP is a WVGA (800x480) panel with an 18-bit parallel
LCD interface. It supports pixel clocks in the range of 30-40 MHz.

This panel details can be found at:
http://boundarydevices.com/product/7-800x480-display/

Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-08-14 21:35:35 +02:00
Gary Bisson
58c948d8c4 of: Add Okaya Electric America vendor prefix
This patch adds vendor prefix for Okaya Electronic America, a provider
of LCD modules and display technologies.

Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-08-14 21:35:34 +02:00
jianwei wang
c6e87f91f0 drm/panel: simple: Add support for NEC NL4827HC19-05B 480x272 panel
This adds support for the NEC NL4827HC19-05B 480x272 panel to the DRM
simple panel driver.

Signed-off-by: Alison Wang <b18965@freescale.com>
Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com>
Signed-off-by: Jianwei Wang <jianwei.wang.chn@gmail.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
[treding@nvidia.com: add .bpc field for panel]
Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-08-14 21:35:33 +02:00
Thierry Reding
d718d79e57 drm/panel: simple: Add support for AUO B080UAN01
The AUO B080UAN01 is an 8.0" WUXGA TFT LCD panel connected using four
DSI lanes. It can be supported by the simple-panel driver.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-08-14 21:35:33 +02:00
Philipp Zabel
d901d2ba8a drm/panel: simple: Correct minimum hsync length of the HannStar HSD070PWW1 panel
According to the data sheet, the minimum horizontal blanking interval
is 54 clocks (1 + 52 + 1), but tests with a Nitrogen6X have shown the
minimum working horizontal blanking interval to be 60 clocks.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-08-14 21:35:32 +02:00
Philipp Zabel
58d6a7bc4f drm/panel: simple: Add bus format for HannStar HSD070PWW1 LVDS panel
The bus format both specifies the bpc and the way the individual bits get
serialized into the 7 LVDS timeslots.

While the is only one standard mapping for 6 bpc and so the driver could
infer the bit mapping from the bpc alone, there are more options for the
8 bpc case which makes specifiying the bus format mandatory.
To keep things consistent across panels and to set a precedent for new
panel additions add the proper bus format.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-08-14 21:35:31 +02:00
Franklin S Cooper Jr
1b0838b5a7 ARM: davinci: Set proper SPI prescale limit value
SPI Davinci driver has been updated to allow SOCs to specify their minimum
prescale value. Update the various SOCs board files that use this driver with
their proper prescaler limit.

Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-14 20:34:47 +01:00
Thierry Reding
330b48bd70 drm/bridge: Add vendor prefixes
Use vendor prefixes for Kconfig symbols and filenames. This should make
it easier to identify the various bridge drivers and to organize the
directory.

v2: fix object name for dw-hdmi (Fabio Estevam)

Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-08-14 21:34:24 +02:00
Stephen Boyd
ad3a942bd2 regulator: core: Print at debug level on debugfs creation failure
Failure to create a debugfs node is not an error, but we print a
warning upon failure to create the node. Downgrade this to a
debug printk so that we're quiet here. This allows multiple
drivers to request a CPU's regulator so that CPUfreq and AVSish
drivers can coexist.

The downside of this approach is that whoever gets to debugfs first
the others who come later to not have any debugfs attributes associated
with them.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-14 20:25:50 +01:00
Maciej S. Szmigiero
dce0332c85 ASoC: fsl_ssi: adjust set DAI format in AC'97 mode
Adjust set DAI format function in fsl_ssi driver
so it doesn't fail and clears RXDIR in AC'97 mode.

Signed-off-by: Maciej Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-14 20:22:27 +01:00
Maciej S. Szmigiero
8ed0c84215 ASoC: fsl_ssi: instantiate AC'97 CODEC
Instantiate AC'97 CODEC in fsl_ssi driver AC'97 mode.

Signed-off-by: Maciej Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-14 20:22:26 +01:00
Maciej S. Szmigiero
04143d614f ASoC: fsl_ssi: add AC'97 ops setting check and cleanup
Check whether setting AC'97 ops succeeded and clean them
on removal so the fsl_ssi driver can be reloaded.

Signed-off-by: Maciej Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-14 20:20:56 +01:00
Maciej S. Szmigiero
06cb373692 ASoC: fsl_ssi: enable AC'97 asymmetric rates
AC'97 bus can support asymmetric playback/capture rates
so enable them in this case in fsl_ssi driver.

Signed-off-by: Maciej Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-14 20:20:56 +01:00
Maciej S. Szmigiero
793e3e9eef ASoC: fsl_ssi: AC'97 DAI driver needs probe method too
AC'97 DAI driver struct need the same probe method as
I2S one to setup DMA params in fsl_ssi driver.

Signed-off-by: Maciej Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-14 20:20:56 +01:00
Maciej S. Szmigiero
8277df3c66 ASoC: fsl_ssi: enable IPG clock during AC'97 reg access
IPG clock have to be enabled during AC'97 CODEC register
access in fsl_ssi driver.

Signed-off-by: Maciej Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-14 20:20:56 +01:00
Antony Pavlov
b4d97f022a mtd: spi-nor: add Spansion S25FL204K support
Spansion S25FL204K is a 4-Mbit 3.0V Serial Flash Memory
with Uniform 4 kB Sectors.

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Acked-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-08-14 11:22:56 -07:00
Fabio Estevam
842c12ddb4 mtd: spi-nor: Improve Kconfig help text for SPI_FSL_QUADSPI
The current "We only connect the NOR to this controller now." text
is not very clear, so explain it better by saying that generic SPI
is not supported by SPI_FSL_QUADSPI and only SPI NOR is.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-08-14 11:22:56 -07:00
Joachim Eastwood
f617b9587c mtd: spi-nor: add driver for NXP SPI Flash Interface (SPIFI)
Add SPI-NOR driver for the SPI Flash Interface (SPIFI)
controller that is found on newer NXP MCU devices.

The controller supports serial SPI Flash devices with 1-, 2-
and 4-bit width in either SPI mode 0 or 3. The controller
can operate in either command or memory mode. In memory mode
the Flash is exposed as normal memory and can be directly
accessed by the CPU.

Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-08-14 11:22:55 -07:00
Joachim Eastwood
89f271c4d0 doc: dt: add documentation for nxp,lpc1773-spifi
Add device tree binding documentation for the SPI Flash Interface
(SPIFI) found on NXP LPC18xx and LPC43xx devies.

Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-08-14 11:22:54 -07:00
Ezequiel Garcia
c16340973f nand: pxa3xx: Increase initial buffer size
The initial buffer is used for the initial commands used to detect
a flash device (STATUS, READID and PARAM).

ONFI param page is 256 bytes, and there are three redundant copies
to be read. JEDEC param page is 512 bytes, and there are also three
redundant copies to be read. Hence this buffer should be at least
512 x 3. This commits rounds the buffer size to 2048.

Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-08-14 11:22:54 -07:00
Martin Sperl
ca861dd0c5 spi: bcm2835: set up spi-mode before asserting cs-gpio
When using reverse polarity for clock (spi-cpol) on a device
the clock line gets altered after chip-select has been asserted
resulting in an additional clock beat, which confuses hardware.

This did not show when using native-CS, as the same register
is used to control cs as well as polarity, so the changes came
into effect at the same time. Unfortunately this is not true
with gpio-cs.

To avoid this situation this patch moves the setup of polarity
(spi-cpol and spi-cpha) outside of the chip-select into
prepare_message, which is run prior to asserting chip-select.

Also fixes resetting 3-wire mode after use of rx-mode, so that
a 3-Wire sequence TX, RX, TX works as well (right now it runs
TX, RX, RX instead)

Reported-by: Noralf Tronnes <noralf@tronnes.org>
Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-14 19:09:09 +01:00
Markus Pargmann
07ea400e1b regmap: Fix regmap_can_raw_write check
This function is missing a check if map->bus->write is implemented. If
it is not implemented arbitrary raw writes are not possible.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-14 19:07:39 +01:00
Linus Torvalds
3670901f73 Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Ingo Molnar:
 "A single clocksource driver suspend/resume fix"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clockevents/drivers/sh_cmt: Only perform clocksource suspend/resume if enabled
2015-08-14 11:06:43 -07:00
Kishon Vijay Abraham I
c329061be5 regulator: pbias: Fix broken pbias disable functionality
regulator_disable of pbias always writes '0' to the enable_reg.
However actual disable value of pbias regulator is not always '0'.
Fix it by populating the disable_val in pbias_reg_info for the
various platforms and assign it to the disable_val of
pbias regulator descriptor. This will be used by
regulator_disable_regmap while disabling pbias regulator.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: <stable@vger.kernel.org>
2015-08-14 19:01:58 +01:00
Linus Torvalds
b25c6cee55 Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
 "Misc fixes: PMU driver corner cases, tooling fixes, and an 'AUX'
  (Intel PT) race related core fix"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/intel/cqm: Do not access cpu_data() from CPU_UP_PREPARE handler
  perf/x86/intel: Fix memory leak on hot-plug allocation fail
  perf: Fix PERF_EVENT_IOC_PERIOD migration race
  perf: Fix double-free of the AUX buffer
  perf: Fix fasync handling on inherited events
  perf tools: Fix test build error when bindir contains double slash
  perf stat: Fix transaction lenght metrics
  perf: Fix running time accounting
2015-08-14 10:57:16 -07:00
Linus Torvalds
5e5013c6b5 Merge branch 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fix from Ingo Molnar:
 "A single fix for a locking self-test crash"

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/pvqspinlock: Fix kernel panic in locking-selftest
2015-08-14 10:45:23 -07:00
Vishal Verma
6ec689542b libnvdimm, btt: write and validate parent_uuid
When a BTT is instantiated on a namespace it must validate the namespace
uuid matches the 'parent_uuid' stored in the btt superblock. This
property enforces that changing the namespace UUID invalidates all
former BTT instances on that storage. For "IO namespaces" that don't
have a label or UUID, the parent_uuid is set to zero, and this
validation is skipped. For such cases, old BTTs have to be invalidated
by forcing the namespace to raw mode, and overwriting the BTT info
blocks.

Based on a patch by Dan Williams <dan.j.williams@intel.com>

Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-08-14 13:43:04 -04:00
Vishal Verma
ab45e76327 libnvdimm, btt: consolidate arena validation
Use arena_is_valid as a common routine for checking the validity of an
info block from both discover_arenas, and nd_btt_probe.

As a result, don't check for validity of the BTT's UUID, and lbasize.
The checksum in the BTT info block guarantees self-consistency, and when
we're called from nd_btt_probe, we don't have a valid uuid or lbasize
available to check against.

Also cleanup to return a bool instead of an int.

Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-08-14 13:43:04 -04:00
Vishal Verma
fbde1414ac libnvdimm, btt: clean up internal interfaces
Consolidate the parameters passed to arena_is_valid into just nd_btt,
and an info block to increase re-usability.

Similarly, btt_arena_write_layout doesn't need to be passed a uuid, as
it can be obtained from arena->nd_btt.

Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-08-14 13:43:04 -04:00
Linus Torvalds
c679765416 Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
 "Back from holidays, found these in the cracks: one nouveau revert, one
  vmwgfx locking fix and a bunch of exynos fixes"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  Revert "drm/nouveau/fifo/gk104: kick channels when deactivating them"
  drm/vmwgfx: Fix execbuf locking issues
  drm/exynos/fimc: fix runtime pm support
  drm/exynos/mixer: always update INT_EN cache
  drm/exynos/mixer: correct vsync configuration sequence
  drm/exynos/mixer: fix interrupt clearing
  drm/exynos/hdmi: fix edid memory leak
  drm/exynos: gsc: fix wrong bitwise operation for swap detection
2015-08-14 10:39:32 -07:00
Dan Williams
e836a256e8 pmem: convert to generic memremap
Kill arch_memremap_pmem() and just let the architecture specify the
flags to be passed to memremap().  Default to writethrough by default.

Suggested-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-08-14 13:23:28 -04:00
Dan Williams
3103dc0304 visorbus: switch from ioremap_cache to memremap
In preparation for deprecating ioremap_cache() convert its usage in
visorbus to memremap.

Cc: Benjamin Romer <benjamin.romer@unisys.com>
Cc: David Kershner <david.kershner@unisys.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-08-14 13:23:28 -04:00
Dan Williams
92281dee82 arch: introduce memremap()
Existing users of ioremap_cache() are mapping memory that is known in
advance to not have i/o side effects.  These users are forced to cast
away the __iomem annotation, or otherwise neglect to fix the sparse
errors thrown when dereferencing pointers to this memory.  Provide
memremap() as a non __iomem annotated ioremap_*() in the case when
ioremap is otherwise a pointer to cacheable memory. Empirically,
ioremap_<cacheable-type>() call sites are seeking memory-like semantics
(e.g.  speculative reads, and prefetching permitted).

memremap() is a break from the ioremap implementation pattern of adding
a new memremap_<type>() for each mapping type and having silent
compatibility fall backs.  Instead, the implementation defines flags
that are passed to the central memremap() and if a mapping type is not
supported by an arch memremap returns NULL.

We introduce a memremap prototype as a trivial wrapper of
ioremap_cache() and ioremap_wt().  Later, once all ioremap_cache() and
ioremap_wt() usage has been removed from drivers we teach archs to
implement arch_memremap() with the ability to strictly enforce the
mapping type.

Cc: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-08-14 13:23:28 -04:00
Ben Hutchings
9ed71e7ad9 DocBook: Fix non-determinstic installation of duplicate man pages
Some kernel-doc sections are included in multiple DocBook files.  This
means the mandocs target will generate the same manual page multiple
times with different metadata (author name/address and manual title,
taken from the including DocBook file).  If it's invoked in a parallel
build, the output is non-determinstic.

Build the manual pages in a separate subdirectory per DocBook file,
then sort and de-duplicate when installing them (which is serialised).

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
[jc: fixed conflicts with the docs tree]
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2015-08-14 11:07:34 -06:00
Junjie Mao
e1d46d30d1 ASoC: Intel: fix runtime pm imbalance on error
pm_runtime_get_sync() increments the runtime PM usage counter even the
call returns an error code. Thus a pairing decrement is needed on the
error handling path to keep the counter balanced.

Signed-off-by: Junjie Mao <junjie.mao@enight.me>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-14 17:41:21 +01:00
Axel Lin
fbf917e14e ASoC: cs42l73: Use case range at appropriate place
The readable registers are in continuous ranges: 0x01 ~ 0x03, 0x05 ~ 0x5f.
Use case range syntax makes the code shorter with better readability when
we have a large number of continuous switch cases.
No functional change with this patch.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Brian Austin <brian.austin@cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-14 17:31:19 +01:00
Axel Lin
7f325bfc93 ASoC: cs42l56: Use case range at appropriate place
The readable registers are in continuous range: 0x01 ~ 0x2e.
Use case range syntax makes the code shorter with better readability when
we have a large number of continuous switch cases.
No functional change with this patch.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Brian Austin <brian.austin@cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-14 17:30:52 +01:00
Axel Lin
4caae9546d ASoC: cs42l52: Use case range at appropriate place
The readable registers are in continuous range: 0x01 ~ 0x34.
Use case range syntax makes the code shorter with better readability when
we have a large number of continuous switch cases.
No functional change with this patch.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Brian Austin <brian.austin@cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-14 17:30:33 +01:00
Axel Lin
c17633081a ASoC: cs35l32: Use case range at appropriate places
Use case range syntax makes the code shorter with better readability when
we have a large number of continuous switch cases.

Below are the summary of readable/volatile/precious registers.

The readable registers:
        0x01 ~  0x0D, 0x0F ~ 0x1C
The volatile registers:
        0x01 ~ 0x05, 0x15 ~ 0x18
The precious registers:
        0x15 ~ 0x18

No functional change with this patch.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Brian Austin <brian.austin@cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-14 17:30:02 +01:00
Vaishali Thakkar
470805eb9f ASoC: tegra: Convert to managed resources
Use managed resource functions devm_clk_put and
devm_snd_soc_register_component to simplify error handling.

To be compatible with the change various gotos are replaced
with direct returns, and unneeded labels are dropped.

Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-14 17:29:32 +01:00
Lars-Peter Clausen
dbe71b9d86 ASoC: ssm4567: Add sense support
The ssm4567 has sensing circuitry that can be used to monitor the current
and voltage on the speaker amplifier output has well as the VBAT input.
This data can be output over the I2S interface so it can be processed by a
DSP or similar.

This patch adds the sense capture output stream to the CODEC DAI as well as
DAPM widgets that ensure that the sensing circuitry is powered up when the
capture stream is active.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-14 17:29:15 +01:00
Jani Nikula
66e2806656 drm/i915: remove excessive scaler debugging messages
There's so much scaler debugging messages that it makes other debugging
hard. Remove them.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-08-14 18:16:45 +02:00
Dave Gordon
8b417c266b drm/i915: Debugfs interface for GuC submission statistics
This provides a means of reading status and counts relating
to GuC actions and submissions.

v2:
    Remove surplus blank line in output [Chris Wilson]

v5:
    Added GuC per-engine submission & seqno statistics

v6:
    Add per-ring statistics to client, refactor client-dumper.

Signed-off-by: Dave Gordon <david.s.gordon@intel.com>
Signed-off-by: Alex Dai <yu.dai@intel.com>
Reviewed-by: Tom O'Rourke <Tom.O'Rourke@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-08-14 18:16:45 +02:00
Alex Dai
d1675198ed drm/i915: Integrate GuC-based command submission
GuC-based submission is mostly the same as execlist mode, up to
intel_logical_ring_advance_and_submit(), where the context being
dispatched would be added to the execlist queue; at this point
we submit the context to the GuC backend instead.

There are, however, a few other changes also required, notably:
1.  Contexts must be pinned at GGTT addresses accessible by the GuC
    i.e. NOT in the range [0..WOPCM_SIZE), so we have to add the
    PIN_OFFSET_BIAS flag to the relevant GGTT-pinning calls.

2.  The GuC's TLB must be invalidated after a context is pinned at
    a new GGTT address.

3.  GuC firmware uses the one page before Ring Context as shared data.
    Therefore, whenever driver wants to get base address of LRC, we
    will offset one page for it. LRC_PPHWSP_PN is defined as the page
    number of LRCA.

4.  In the work queue used to pass requests to the GuC, the GuC
    firmware requires the ring-tail-offset to be represented as an
    11-bit value, expressed in QWords. Therefore, the ringbuffer
    size must be reduced to the representable range (4 pages).

v2:
    Defer adding #defines until needed [Chris Wilson]
    Rationalise type declarations [Chris Wilson]

v4:
    Squashed kerneldoc patch into here [Daniel Vetter]

v5:
    Update request->tail in code common to both GuC and execlist modes.
    Add a private version of lr_context_update(), as sharing the
        execlist version leads to race conditions when the CPU and
        the GuC both update TAIL in the context image.
    Conversion of error-captured HWS page to string must account
        for offset from start of object to actual HWS (LRC_PPHWSP_PN).

Issue: VIZ-4884
Signed-off-by: Alex Dai <yu.dai@intel.com>
Signed-off-by: Dave Gordon <david.s.gordon@intel.com>
Reviewed-by: Tom O'Rourke <Tom.O'Rourke@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-08-14 18:16:44 +02:00
Dave Gordon
4df001d398 drm/i915: Interrupt routing for GuC submission
Turn on interrupt steering to route necessary interrupts to GuC.

v6:
    Rebased

Issue: VIZ-4884
Signed-off-by: Alex Dai <yu.dai@intel.com>
Signed-off-by: Dave Gordon <david.s.gordon@intel.com>
Reviewed-by: Tom O'Rourke <Tom.O'Rourke@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-08-14 18:16:43 +02:00
Dave Gordon
44a28b1d36 drm/i915: Implementation of GuC submission client
A GuC client has its own doorbell and workqueue. It maintains the
doorbell cache line, process description object and work queue item.

A default guc_client is created for the i915 driver to use for
normal-priority in-order submission.

Note that the created client is not yet ready for use; doorbell
allocation will fail as we haven't yet linked the GuC's context
descriptor to the default contexts for each ring (see later patch).

v2:
    Defer adding structure members until needed [Chris Wilson]
    Rationalise type declarations [Chris Wilson]

v5:
    Add GuC per-engine submission & seqno statistics.
    Move wq locking to encompass both get_space() and add_item().
    Take forcewake lock in host2guc_action() [Tom O'Rourke]

v6:
    Fix GuC doorbell cacheline selection code (the
        cacheline-within-page calculation was wrong).
    Rename GuC priorities to make them closer to the names used in
        the GuC firmware source, matching what the autogenerated
        versions will (probably) be.
    Add per-ring statistics to client.

Issue: VIZ-4884
Signed-off-by: Alex Dai <yu.dai@intel.com>
Signed-off-by: Dave Gordon <david.s.gordon@intel.com>
Reviewed-by: Tom O'Rourke <Tom.O'Rourke@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-08-14 18:16:42 +02:00
Alex Dai
4c7e77fc10 drm/i915: Enable GuC firmware log
Allocate a GEM object to hold GuC log data. A debugfs interface
(i915_guc_log_dump) is provided to print out the log content.

v2:
    Add struct members at point of use [Chris Wilson]

v6:
    Rebased

Issue: VIZ-4884
Signed-off-by: Alex Dai <yu.dai@intel.com>
Signed-off-by: Dave Gordon <david.s.gordon@intel.com>
Reviewed-by: Tom O'Rourke <Tom.O'Rourke@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-08-14 18:16:42 +02:00
Alex Dai
bac427f8ab drm/i915: Prepare for GuC-based command submission
This adds the first of the data structures used to communicate with the
GuC (the pool of guc_context structures).

We create a GuC-specific wrapper round the GEM object allocator as all
GEM objects shared with the GuC must be pinned into GGTT space at an
address that is NOT in the range [0..WOPCM_TOP), as that range of GGTT
addresses is not accessible to the GuC (from the GuC's point of view,
it's permanently reserved for other objects such as the BootROM & SRAM).

Later, we will need to allocate additional GuC-sharable objects for the
submission client(s) and the GuC's debug log.

v2:
    Remove redundant initialisation [Chris Wilson]
    Defer adding struct members until needed [Chris Wilson]
    Local functions should pass dev_priv rather than dev [Chris Wilson]

v5:
    Invalidate GuC TLB after allocating and pinning a new object

v6:
    Rebased

Issue: VIZ-4884
Signed-off-by: Alex Dai <yu.dai@intel.com>
Signed-off-by: Dave Gordon <david.s.gordon@intel.com>
Reviewed-by: Tom O'Rourke <Tom.O'Rourke@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-08-14 18:16:41 +02:00