mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/
synced 2026-10-28 20:03:05 +00:00
91,367 commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Mel Gorman
|
f169c62ff7 |
sched/numa: Complete scanning of inactive VMAs when there is no alternative
VMAs are skipped if there is no recent fault activity but this represents
a chicken-and-egg problem as there may be no fault activity if the PTEs
are never updated to trap NUMA hints. There is an indirect reliance on
scanning to be forced early in the lifetime of a task but this may fail
to detect changes in phase behaviour. Force inactive VMAs to be scanned
when all other eligible VMAs have been updated within the same scan
sequence.
Test results in general look good with some changes in performance, both
negative and positive, depending on whether the additional scanning and
faulting was beneficial or not to the workload. The autonuma benchmark
workload NUMA01_THREADLOCAL was picked for closer examination. The workload
creates two processes with numerous threads and thread-local storage that
is zero-filled in a loop. It exercises the corner case where unrelated
threads may skip VMAs that are thread-local to another thread and still
has some VMAs that inactive while the workload executes.
The VMA skipping activity frequency with and without the patch:
6.6.0-rc2-sched-numabtrace-v1
=============================
649 reason=scan_delay
9,094 reason=unsuitable
48,915 reason=shared_ro
143,919 reason=inaccessible
193,050 reason=pid_inactive
6.6.0-rc2-sched-numabselective-v1
=============================
146 reason=seq_completed
622 reason=ignore_pid_inactive
624 reason=scan_delay
6,570 reason=unsuitable
16,101 reason=shared_ro
27,608 reason=inaccessible
41,939 reason=pid_inactive
Note that with the patch applied, the PID activity is ignored
(ignore_pid_inactive) to ensure a VMA with some activity is completely
scanned. In addition, a small number of VMAs are scanned when no other
eligible VMA is available during a single scan window (seq_completed).
The number of times a VMA is skipped due to no PID activity from the
scanning task (pid_inactive) drops dramatically. It is expected that
this will increase the number of PTEs updated for NUMA hinting faults
as well as hinting faults but these represent PTEs that would otherwise
have been missed. The tradeoff is scan+fault overhead versus improving
locality due to migration.
On a 2-socket Cascade Lake test machine, the time to complete the
workload is as follows;
6.6.0-rc2 6.6.0-rc2
sched-numabtrace-v1 sched-numabselective-v1
Min elsp-NUMA01_THREADLOCAL 174.22 ( 0.00%) 117.64 ( 32.48%)
Amean elsp-NUMA01_THREADLOCAL 175.68 ( 0.00%) 123.34 * 29.79%*
Stddev elsp-NUMA01_THREADLOCAL 1.20 ( 0.00%) 4.06 (-238.20%)
CoeffVar elsp-NUMA01_THREADLOCAL 0.68 ( 0.00%) 3.29 (-381.70%)
Max elsp-NUMA01_THREADLOCAL 177.18 ( 0.00%) 128.03 ( 27.74%)
The time to complete the workload is reduced by almost 30%:
6.6.0-rc2 6.6.0-rc2
sched-numabtrace-v1 sched-numabselective-v1 /
Duration User 91201.80 63506.64
Duration System 2015.53 1819.78
Duration Elapsed 1234.77 868.37
In this specific case, system CPU time was not increased but it's not
universally true.
From vmstat, the NUMA scanning and fault activity is as follows;
6.6.0-rc2 6.6.0-rc2
sched-numabtrace-v1 sched-numabselective-v1
Ops NUMA base-page range updates 64272.00 26374386.00
Ops NUMA PTE updates 36624.00 55538.00
Ops NUMA PMD updates 54.00 51404.00
Ops NUMA hint faults 15504.00 75786.00
Ops NUMA hint local faults % 14860.00 56763.00
Ops NUMA hint local percent 95.85 74.90
Ops NUMA pages migrated 1629.00 6469222.00
Both the number of PTE updates and hint faults is dramatically
increased. While this is superficially unfortunate, it represents
ranges that were simply skipped without the patch. As a result
of the scanning and hinting faults, many more pages were also
migrated but as the time to completion is reduced, the overhead
is offset by the gain.
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Raghavendra K T <raghavendra.kt@amd.com>
Link: https://lore.kernel.org/r/20231010083143.19593-7-mgorman@techsingularity.net
|
||
|
Mel Gorman
|
b7a5b537c5 |
sched/numa: Complete scanning of partial VMAs regardless of PID activity
NUMA Balancing skips VMAs when the current task has not trapped a NUMA fault within the VMA. If the VMA is skipped then mm->numa_scan_offset advances and a task that is trapping faults within the VMA may never fully update PTEs within the VMA. Force tasks to update PTEs for partially scanned PTEs. The VMA will be tagged for NUMA hints by some task but this removes some of the benefit of tracking PID activity within a VMA. A follow-on patch will mitigate this problem. The test cases and machines evaluated did not trigger the corner case so the performance results are neutral with only small changes within the noise from normal test-to-test variance. However, the next patch makes the corner case easier to trigger. Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Ingo Molnar <mingo@kernel.org> Tested-by: Raghavendra K T <raghavendra.kt@amd.com> Link: https://lore.kernel.org/r/20231010083143.19593-6-mgorman@techsingularity.net |
||
|
Mel Gorman
|
ed2da8b725 |
sched/numa: Trace decisions related to skipping VMAs
NUMA balancing skips or scans VMAs for a variety of reasons. In preparation for completing scans of VMAs regardless of PID access, trace the reasons why a VMA was skipped. In a later patch, the tracing will be used to track if a VMA was forcibly scanned. Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20231010083143.19593-4-mgorman@techsingularity.net |
||
|
Mel Gorman
|
f3a6c97940 |
sched/numa: Rename vma_numab_state::access_pids[] => ::pids_active[], ::next_pid_reset => ::pids_active_reset
The access_pids[] field name is somewhat ambiguous as no PIDs are accessed. Similarly, it's not clear that next_pid_reset is related to access_pids[]. Rename the fields to more accurately reflect their purpose. [ mingo: Rename in the comments too. ] Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20231010083143.19593-3-mgorman@techsingularity.net |
||
|
Mel Gorman
|
9ae5c00ea2 |
sched/numa: Document vma_numab_state fields
Document the intended usage of the fields. [ mingo: Reformatted to take less vertical space & tidied it up. ] Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20231010083143.19593-2-mgorman@techsingularity.net |
||
Ingo Molnar
|
8db30574db |
Merge branch 'sched/urgent' into sched/core, to pick up fixes and refresh the branch
Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
Kir Kolyshkin
|
d844fe65f0 |
sched/headers: Move 'struct sched_param' out of uapi, to work around glibc/musl breakage
Both glibc and musl define 'struct sched_param' in sched.h, while kernel
has it in uapi/linux/sched/types.h, making it cumbersome to use
sched_getattr(2) or sched_setattr(2) from userspace.
For example, something like this:
#include <sched.h>
#include <linux/sched/types.h>
struct sched_attr sa;
will result in "error: redefinition of ‘struct sched_param’" (note the
code doesn't need sched_param at all -- it needs struct sched_attr
plus some stuff from sched.h).
The situation is, glibc is not going to provide a wrapper for
sched_{get,set}attr, thus the need to include linux/sched_types.h
directly, which leads to the above problem.
Thus, the userspace is left with a few sub-par choices when it wants to
use e.g. sched_setattr(2), such as maintaining a copy of struct
sched_attr definition, or using some other ugly tricks.
OTOH, 'struct sched_param' is well known, defined in POSIX, and it won't
be ever changed (as that would break backward compatibility).
So, while 'struct sched_param' is indeed part of the kernel uapi,
exposing it the way it's done now creates an issue, and hiding it
(like this patch does) fixes that issue, hopefully without creating
another one: common userspace software rely on libc headers, and as
for "special" software (like libc), it looks like glibc and musl
do not rely on kernel headers for 'struct sched_param' definition
(but let's Cc their mailing lists in case it's otherwise).
The alternative to this patch would be to move struct sched_attr to,
say, linux/sched.h, or linux/sched/attr.h (the new file).
Oh, and here is the previous attempt to fix the issue:
https://lore.kernel.org/all/20200528135552.GA87103@google.com/
While I support Linus arguments, the issue is still here
and needs to be fixed.
[ mingo: Linus is right, this shouldn't be needed - but on the other
hand I agree that this header is not really helpful to
user-space as-is. So let's pretend that
<uapi/linux/sched/types.h> is only about sched_attr, and
call this commit a workaround for user-space breakage
that it in reality is ... Also, remove the Fixes tag. ]
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230808030357.1213829-1-kolyshkin@gmail.com
|
||
Linus Torvalds
|
d2c5231581 |
Fourteen hotfixes, eleven of which are cc:stable. The remainder pertain
to issues which were introduced after 6.5. -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZRmSDAAKCRDdBJ7gKXxA jlSaAQCe3SnBdjRmuzbp5iIfNJOY7GXLN4NwMsArRUxRGY27IwD+KWhXZP/ydVnt ZgS4x9rmarHuh5Pxds+6SRGhihRz/Ak= =sf/5 -----END PGP SIGNATURE----- Merge tag 'mm-hotfixes-stable-2023-10-01-08-34' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc fixes from Andrew Morton: "Fourteen hotfixes, eleven of which are cc:stable. The remainder pertain to issues which were introduced after 6.5" * tag 'mm-hotfixes-stable-2023-10-01-08-34' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: Crash: add lock to serialize crash hotplug handling selftests/mm: fix awk usage in charge_reserved_hugetlb.sh and hugetlb_reparenting_test.sh that may cause error mm: mempolicy: keep VMA walk if both MPOL_MF_STRICT and MPOL_MF_MOVE are specified mm/damon/vaddr-test: fix memory leak in damon_do_test_apply_three_regions() mm, memcg: reconsider kmem.limit_in_bytes deprecation mm: zswap: fix potential memory corruption on duplicate store arm64: hugetlb: fix set_huge_pte_at() to work with all swap entries mm: hugetlb: add huge page size param to set_huge_pte_at() maple_tree: add MAS_UNDERFLOW and MAS_OVERFLOW states maple_tree: add mas_is_active() to detect in-tree walks nilfs2: fix potential use after free in nilfs_gccache_submit_read_data() mm: abstract moving to the next PFN mm: report success more often from filemap_map_folio_range() fs: binfmt_elf_efpic: fix personality for ELF-FDPIC |
||
|
Linus Torvalds
|
373ceff28e |
Fix a spurious kernel warning during CPU hotplug events that
may trigger when timer/hrtimer softirqs are pending, which are otherwise hotplug-safe and don't merit a warning. Signed-off-by: Ingo Molnar <mingo@kernel.org> -----BEGIN PGP SIGNATURE----- iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmUZMnoRHG1pbmdvQGtl cm5lbC5vcmcACgkQEnMQ0APhK1ik9Q/+NR+Uq+hJUYMg00FF6f78SBwEXQ0vnfhs fGxnJMCRAfX4zEnCl4gNkIHy9k0n5/NY30YTkHlrLWktS4glSAUHCMDCr5FhyNGF IHwShR6bw2D2JJP6hOuM5MXOw5XewJRv95QC4mzzS2+loy7Vtte9WtJc9E07el/n 6bH5HyJKY/oR/r1kQTMpNoPzbNSGe8wDGZesjBeKBfgp7ZZ5ZTf/cwnJxL+C4nG0 VTZ2pawgT8+pWuEp3WpWE35dYcYWkpxw0wOXMxV1rymmA7+X1NJ+aH7DHp4e3o00 dHih13GrZek4FKzSeH0nGGW/jrO6ap942yNhlsLzJXI8UiaAt+T3j83020d7zlAx 1j2KSwWggBbolL+vzDtOaDJ7rx/xLWeN9ofAlnBmOmYwaWeR31ZtDqPq2ObN5eJ1 T/ALFQ9SNCn5khfYLKJQzZJSGCJ+1N6Wvl5huVil16WG88BzVc5WkxdC1LhJ5cEZ EwnaDwk0R9iQjok+7zxsIrD/CBe3ugsfOQb18i2xoP2MC1ivOo5HYAvVeT7Oy6nw f1zWd3VuLg+/iieoNnHSIZGsnmpJlpF3piNGCt65P0W0qZlSekOlK68ExB/npriO lCpKI50ATmup+FVa2riJZ3EhODEdlx8umb7gOaxjQSrMgkAIItrK02BQ6I5iAWKh JC+yQa8SN/g= =Ms07 -----END PGP SIGNATURE----- Merge tag 'timers-urgent-2023-10-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fix from Ingo Molnar: "Fix a spurious kernel warning during CPU hotplug events that may trigger when timer/hrtimer softirqs are pending, which are otherwise hotplug-safe and don't merit a warning" * tag 'timers-urgent-2023-10-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timers: Tag (hr)timer softirq as hotplug safe |
||
|
Linus Torvalds
|
3b517966c5 |
dma-mapping fixes for Linux 6.6
- fix the narea calculation in swiotlb initialization (Ross Lagerwall) - fix the check whether a device has used swiotlb (Petr Tesarik) -----BEGIN PGP SIGNATURE----- iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAmUYWTULHGhjaEBsc3Qu ZGUACgkQD55TZVIEUYMilA/8DomLRCrDy792MoRvBCThWaY6auW4bCUoY7S6VZe7 LVECKAJRwFH7b+dk1mNjPhWTyq8/wB7kr/OLuU9HDcVIeiP9zxks4BMQ4RGc/ZuK rSZ5ZHPVVCC4EOI3ncjQXrODwgGkGUvtdriByCtX2r4NLBjO1T0vUQB4bLyBTZf+ GnTCLxCkSrIxaqniRvM0K34yO/0rq0ci5840MNneR7MKQkVqPUDY83sHwL1KcQPf s16lwclQdjZdOVpFMPxFin5NpvPIrjdrvhoaxdnz+8ZuwSACqRUZDQuNlZ3+Zep6 iaynNR04o0c2p0PTT5l3ZRD5vsyCjvc+/3kB3KlM33XbBArWi6XV+694QQn59JnZ 5MmHoIulwZGLsIlTG188QreZBlLrmxylUX311Kot5ood/HW8DsYbTo/krbiiUgEk MXKWq9k6cQOdhgriS4zxvUl+xkjby12jvSFxv9tN3HHvFsFB8+veVrTuLZzEDXpX a5PrmI/dcQmlVpCZllzVzeTgL2KeE1Jo0uRZ1vXhuoX8IBys4/TstIXOB4jnyVb4 kzrHbLIoVqLSN42eVMRKBrqGXGlZSWETBpkdSQ41St6t/3MurhKAWZ/1SFPXlI06 SnatIdOU7nSZRofK8/Xe1CnWia5NUpyUQpb+tLUHTgo4kZzGV330bf34iJ+BvC1h aks= =bhgc -----END PGP SIGNATURE----- Merge tag 'dma-mapping-6.6-2023-09-30' of git://git.infradead.org/users/hch/dma-mapping Pull dma-mapping fixes from Christoph Hellwig: - fix the narea calculation in swiotlb initialization (Ross Lagerwall) - fix the check whether a device has used swiotlb (Petr Tesarik) * tag 'dma-mapping-6.6-2023-09-30' of git://git.infradead.org/users/hch/dma-mapping: swiotlb: fix the check whether a device has used software IO TLB swiotlb: use the calculated number of areas |
||
Ryan Roberts
|
935d4f0c6d |
mm: hugetlb: add huge page size param to set_huge_pte_at()
Patch series "Fix set_huge_pte_at() panic on arm64", v2. This series fixes a bug in arm64's implementation of set_huge_pte_at(), which can result in an unprivileged user causing a kernel panic. The problem was triggered when running the new uffd poison mm selftest for HUGETLB memory. This test (and the uffd poison feature) was merged for v6.5-rc7. Ideally, I'd like to get this fix in for v6.6 and I've cc'ed stable (correctly this time) to get it backported to v6.5, where the issue first showed up. Description of Bug ================== arm64's huge pte implementation supports multiple huge page sizes, some of which are implemented in the page table with multiple contiguous entries. So set_huge_pte_at() needs to work out how big the logical pte is, so that it can also work out how many physical ptes (or pmds) need to be written. It previously did this by grabbing the folio out of the pte and querying its size. However, there are cases when the pte being set is actually a swap entry. But this also used to work fine, because for huge ptes, we only ever saw migration entries and hwpoison entries. And both of these types of swap entries have a PFN embedded, so the code would grab that and everything still worked out. But over time, more calls to set_huge_pte_at() have been added that set swap entry types that do not embed a PFN. And this causes the code to go bang. The triggering case is for the uffd poison test, commit |
||
Liam R. Howlett
|
a8091f039c |
maple_tree: add MAS_UNDERFLOW and MAS_OVERFLOW states
When updating the maple tree iterator to avoid rewalks, an issue was
introduced when shifting beyond the limits. This can be seen by trying to
go to the previous address of 0, which would set the maple node to
MAS_NONE and keep the range as the last entry.
Subsequent calls to mas_find() would then search upwards from mas->last
and skip the value at mas->index/mas->last. This showed up as a bug in
mprotect which skips the actual VMA at the current range after attempting
to go to the previous VMA from 0.
Since MAS_NONE may already be set when searching for a value that isn't
contained within a node, changing the handling of MAS_NONE in mas_find()
would make the code more complicated and error prone. Furthermore, there
was no way to tell which limit was hit, and thus which action to take
(next or the entry at the current range).
This solution is to add two states to track what happened with the
previous iterator action. This allows for the expected behaviour of the
next command to return the correct item (either the item at the range
requested, or the next/previous).
Tests are also added and updated accordingly.
Link: https://lkml.kernel.org/r/20230921181236.509072-3-Liam.Howlett@oracle.com
Link: https://gist.github.com/heatd/85d2971fae1501b55b6ea401fbbe485b
Link: https://lore.kernel.org/linux-mm/20230921181236.509072-1-Liam.Howlett@oracle.com/
Fixes:
|
||
|
Liam R. Howlett
|
5c590804b6 |
maple_tree: add mas_is_active() to detect in-tree walks
Patch series "maple_tree: Fix mas_prev() state regression". Pedro Falcato retported an mprotect regression [1] which was bisected back to the iterator changes for maple tree. Root cause analysis showed the mas_prev() running off the end of the VMA space (previous from 0) followed by mas_find(), would skip the first value. This patchset introduces maple state underflow/overflow so the sequence of calls on the maple state will return what the user expects. Users who encounter this bug may see mprotect(), userfaultfd_register(), and mlock() fail on VMAs mapped with address 0. This patch (of 2): Instead of constantly checking each possibility of the maple state, create a fast path that will skip over checking unlikely states. Link: https://lkml.kernel.org/r/20230921181236.509072-1-Liam.Howlett@oracle.com Link: https://lkml.kernel.org/r/20230921181236.509072-2-Liam.Howlett@oracle.com Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com> Cc: Pedro Falcato <pedro.falcato@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Matthew Wilcox (Oracle)
|
ce60f27bb6 |
mm: abstract moving to the next PFN
In order to fix the L1TF vulnerability, x86 can invert the PTE bits for
PROT_NONE VMAs, which means we cannot move from one PTE to the next by
adding 1 to the PFN field of the PTE. This results in the BUG reported at
[1].
Abstract advancing the PTE to the next PFN through a pte_next_pfn()
function/macro.
Link: https://lkml.kernel.org/r/20230920040958.866520-1-willy@infradead.org
Fixes:
|
||
|
Linus Torvalds
|
14c06b913d |
A series that fixes an involved "double watch error" deadlock in RBD
marked for stable and two cleanups. -----BEGIN PGP SIGNATURE----- iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAmUW5QwTHGlkcnlvbW92 QGdtYWlsLmNvbQAKCRBKf944AhHziw7+B/99D/BRIJUaCz8hm2xMZC3Yu6Cvi2de YlgHZBuHm5lmihzITEdoHTmWlIpgGchqjTaikCvVooKEe1w4sNr7nYFiXUFVw9sf W/I06dtlJlj2f4oyK91i4sIzpQKbXZznFDpTHThjRJt+uyUp3RYVbrCDMmGAnJv3 foppstycm5fe2Y2e/RgNyYOHY+EAjvS5UrpvT3lAX+iw5KXR1pyMBrFo8iICLPlZ TIPP4mwlVwb/WB1rGnxaK65RJxGuXLwuMWdLF9kq1ZeCld6owPH3x2RDax2+vMvA bZxI6gQymU2SquKiNseYF3kQ+2KdC5mfjmkoncOH79Je4JPHf7xa4LYZ =7/Ez -----END PGP SIGNATURE----- Merge tag 'ceph-for-6.6-rc4' of https://github.com/ceph/ceph-client Pull ceph fixes from Ilya Dryomov: "A series that fixes an involved 'double watch error' deadlock in RBD marked for stable and two cleanups" * tag 'ceph-for-6.6-rc4' of https://github.com/ceph/ceph-client: rbd: take header_rwsem in rbd_dev_refresh() only when updating rbd: decouple parent info read-in from updating rbd_dev rbd: decouple header read-in from updating rbd_dev->header rbd: move rbd_dev_refresh() definition Revert "ceph: make members in struct ceph_mds_request_args_ext a union" ceph: remove unnecessary check for NULL in parse_longname() |
||
Damien Le Moal
|
aa3998dbeb |
ata: libata-scsi: Disable scsi device manage_system_start_stop
The introduction of a device link to create a consumer/supplier relationship between the scsi device of an ATA device and the ATA port of that ATA device fixes the ordering of system suspend and resume operations. For suspend, the scsi device is suspended first and the ata port after it. This is fine as this allows the synchronize cache and START STOP UNIT commands issued by the scsi disk driver to be executed before the ata port is disabled. For resume operations, the ata port is resumed first, followed by the scsi device. This allows having the request queue of the scsi device to be unfrozen after the ata port resume is scheduled in EH, thus avoiding to see new requests prematurely issued to the ATA device. Since libata sets manage_system_start_stop to 1, the scsi disk resume operation also results in issuing a START STOP UNIT command to the device being resumed so that the device exits standby power mode. However, restoring the ATA device to the active power mode must be synchronized with libata EH processing of the port resume operation to avoid either 1) seeing the start stop unit command being received too early when the port is not yet resumed and ready to accept commands, or after the port resume process issues commands such as IDENTIFY to revalidate the device. In this last case, the risk is that the device revalidation fails with timeout errors as the drive is still spun down. Commit |
||
|
Damien Le Moal
|
fb99ef1786 |
ata: libata-scsi: link ata port and scsi device
There is no direct device ancestry defined between an ata_device and
its scsi device which prevents the power management code from correctly
ordering suspend and resume operations. Create such ancestry with the
ata device as the parent to ensure that the scsi device (child) is
suspended before the ata device and that resume handles the ata device
before the scsi device.
The parent-child (supplier-consumer) relationship is established between
the ata_port (parent) and the scsi device (child) with the function
device_add_link(). The parent used is not the ata_device as the PM
operations are defined per port and the status of all devices connected
through that port is controlled from the port operations.
The device link is established with the new function
ata_scsi_slave_alloc(), and this function is used to define the
->slave_alloc callback of the scsi host template of all ata drivers.
Fixes:
|
||
Frederic Weisbecker
|
1a6a464774 |
timers: Tag (hr)timer softirq as hotplug safe
Specific stress involving frequent CPU-hotplug operations, such as
running rcutorture for example, may trigger the following message:
NOHZ tick-stop error: local softirq work is pending, handler #02!!!"
This happens in the CPU-down hotplug process, after
CPUHP_AP_SMPBOOT_THREADS whose teardown callback parks ksoftirqd, and
before the target CPU shuts down through CPUHP_AP_IDLE_DEAD. In this
fragile intermediate state, softirqs waiting for threaded handling may be
forever ignored and eventually reported by the idle task as in the above
example.
However some vectors are known to be safe as long as the corresponding
subsystems have teardown callbacks handling the migration of their
events. The above error message reports pending timers softirq although
this vector can be considered as hotplug safe because the
CPUHP_TIMERS_PREPARE teardown callback performs the necessary migration
of timers after the death of the CPU. Hrtimers also have a similar
hotplug handling.
Therefore this error message, as far as (hr-)timers are concerned, can
be considered spurious and the relevant softirq vectors can be marked as
hotplug safe.
Fixes:
|
||
Petr Tesarik
|
2d5780bbef |
swiotlb: fix the check whether a device has used software IO TLB
When CONFIG_SWIOTLB_DYNAMIC=y, devices which do not use the software IO TLB can avoid swiotlb lookup. A flag is added by commit |
||
Matthias Schiffer
|
753a4d531b |
ata: libata-sata: increase PMP SRST timeout to 10s
On certain SATA controllers, softreset fails after wakeup from S2RAM with
the message "softreset failed (1st FIS failed)", sometimes resulting in
drives not being detected again. With the increased timeout, this issue
is avoided. Instead, "softreset failed (device not ready)" is now
logged 1-2 times; this later failure seems to cause fewer problems
however, and the drives are detected reliably once they've spun up and
the probe is retried.
The issue was observed with the primary SATA controller of the QNAP
TS-453B, which is an "Intel Corporation Celeron/Pentium Silver Processor
SATA Controller [8086:31e3] (rev 06)" integrated in the Celeron J4125 CPU,
and the following drives:
- Seagate IronWolf ST12000VN0008
- Seagate IronWolf ST8000NE0004
The SATA controller seems to be more relevant to this issue than the
drives, as the same drives are always detected reliably on the secondary
SATA controller on the same board (an ASMedia 106x) without any "softreset
failed" errors even without the increased timeout.
Fixes:
|
||
|
Linus Torvalds
|
8a511e7efc |
ARM:
* Fix EL2 Stage-1 MMIO mappings where a random address was used
* Fix SMCCC function number comparison when the SVE hint is set
RISC-V:
* Fix KVM_GET_REG_LIST API for ISA_EXT registers
* Fix reading ISA_EXT register of a missing extension
* Fix ISA_EXT register handling in get-reg-list test
* Fix filtering of AIA registers in get-reg-list test
x86:
* Fixes for TSC_AUX virtualization
* Stop zapping page tables asynchronously, since we don't
zap them as often as before
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmUQU5YUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNcdwf/X8eHQ5yfAE0J70xs4VZ1z7B8i77q
P54401z/q0FyQ4yyTHwbUv/FgVYscZ0efYogrkd3uuoPNtLmN2xKj1tM95A2ncP/
v318ljevZ0FWZ6J471Xu9MM3u15QmjC3Wai9z6IP4tz0S2rUhOYTJdFqlNf6gQSu
P8n9l2j3ZLAiUNizXa8M7350gCUFCBi37dvLLVTYOxbu17hZtmNjhNpz5G7YNc9y
zmJIJh30ZnMGUgMylLfcW0ZoqQFNIkNg3yyr9YjY68bTW5aspXdhp9u0zI+01xYF
sT+tOXBPPLi9MBuckX+oLMsvNXEZWxos2oMow3qziMo83neG+jU+WhjLHg==
=+sqe
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Fix EL2 Stage-1 MMIO mappings where a random address was used
- Fix SMCCC function number comparison when the SVE hint is set
RISC-V:
- Fix KVM_GET_REG_LIST API for ISA_EXT registers
- Fix reading ISA_EXT register of a missing extension
- Fix ISA_EXT register handling in get-reg-list test
- Fix filtering of AIA registers in get-reg-list test
x86:
- Fixes for TSC_AUX virtualization
- Stop zapping page tables asynchronously, since we don't zap them as
often as before"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: SVM: Do not use user return MSR support for virtualized TSC_AUX
KVM: SVM: Fix TSC_AUX virtualization setup
KVM: SVM: INTERCEPT_RDTSCP is never intercepted anyway
KVM: x86/mmu: Stop zapping invalidated TDP MMU roots asynchronously
KVM: x86/mmu: Do not filter address spaces in for_each_tdp_mmu_root_yield_safe()
KVM: x86/mmu: Open code leaf invalidation from mmu_notifier
KVM: riscv: selftests: Selectively filter-out AIA registers
KVM: riscv: selftests: Fix ISA_EXT register handling in get-reg-list
RISC-V: KVM: Fix riscv_vcpu_get_isa_ext_single() for missing extensions
RISC-V: KVM: Fix KVM_GET_REG_LIST API for ISA_EXT registers
KVM: selftests: Assert that vasprintf() is successful
KVM: arm64: nvhe: Ignore SVE hint in SMCCC function ID
KVM: arm64: Properly return allocated EL2 VA from hyp_alloc_private_va_range()
|
||
|
Linus Torvalds
|
2ad78f8cee |
cxl fixes for v6.6-rc3
- Fix multiple scenarios where platform firmware defined regions fail to
be assembled by the CXL core.
- Fix a spurious driver-load failure on platforms that enable OS native
AER, but not OS native CXL error handling.
- Fix a regression detecting "poison" commands when "security" commands
are also defined.
- Fix a cxl_test regression with the move to centralize CXL port
register enumeration in the CXL core.
- Miscellaneous small fixes and cleanups
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCZQ9ZeAAKCRDfioYZHlFs
Z2b6AQDCNGMZdvJXwXW8LY/GHzJvuIWzvzSf0/Zy050Q1s4qrQEAqmmKCXtzjtMV
PQLm9o3a96Wb/zSzRZJwMVCTyXClVwg=
=sSix
-----END PGP SIGNATURE-----
Merge tag 'cxl-fixes-6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl fixes from Dan Williams:
"A collection of regression fixes, bug fixes, and some small cleanups
to the Compute Express Link code.
The regressions arrived in the v6.5 dev cycle and missed the v6.6
merge window due to my personal absences this cycle. The most
important fixes are for scenarios where the CXL subsystem fails to
parse valid region configurations established by platform firmware.
This is important because agreement between OS and BIOS on the CXL
configuration is fundamental to implementing "OS native" error
handling, i.e. address translation and component failure
identification.
Other important fixes are a driver load error when the BIOS lets the
Linux PCI core handle AER events, but not CXL memory errors.
The other fixex might have end user impact, but for now are only known
to trigger in our test/emulation environment.
Summary:
- Fix multiple scenarios where platform firmware defined regions fail
to be assembled by the CXL core.
- Fix a spurious driver-load failure on platforms that enable OS
native AER, but not OS native CXL error handling.
- Fix a regression detecting "poison" commands when "security"
commands are also defined.
- Fix a cxl_test regression with the move to centralize CXL port
register enumeration in the CXL core.
- Miscellaneous small fixes and cleanups"
* tag 'cxl-fixes-6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/acpi: Annotate struct cxl_cxims_data with __counted_by
cxl/port: Fix cxl_test register enumeration regression
cxl/region: Refactor granularity select in cxl_port_setup_targets()
cxl/region: Match auto-discovered region decoders by HPA range
cxl/mbox: Fix CEL logic for poison and security commands
cxl/pci: Replace host_bridge->native_aer with pcie_aer_is_native()
PCI/AER: Export pcie_aer_is_native()
cxl/pci: Fix appropriate checking for _OSC while handling CXL RAS registers
|
||
|
Linus Torvalds
|
85eba5f175 |
13 hotfixes, 10 of which pertain to post-6.5 issues. The other 3 are
cc:stable. -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZQ8hRwAKCRDdBJ7gKXxA jlK9AQDzT/FUQV3kIshsV1IwAKFcg7gtcFSN0vs+pV+e1+4tbQD/Z2OgfGFFsCSP X6uc2cYHc9DG5/o44iFgadW8byMssQs= =w+St -----END PGP SIGNATURE----- Merge tag 'mm-hotfixes-stable-2023-09-23-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc fixes from Andrew Morton: "13 hotfixes, 10 of which pertain to post-6.5 issues. The other three are cc:stable" * tag 'mm-hotfixes-stable-2023-09-23-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: proc: nommu: fix empty /proc/<pid>/maps filemap: add filemap_map_order0_folio() to handle order0 folio proc: nommu: /proc/<pid>/maps: release mmap read lock mm: memcontrol: fix GFP_NOFS recursion in memory.high enforcement pidfd: prevent a kernel-doc warning argv_split: fix kernel-doc warnings scatterlist: add missing function params to kernel-doc selftests/proc: fixup proc-empty-vm test after KSM changes revert "scripts/gdb/symbols: add specific ko module load command" selftests: link libasan statically for tests with -fsanitize=address task_work: add kerneldoc annotation for 'data' argument mm: page_alloc: fix CMA and HIGHATOMIC landing on the wrong buddy list sh: mm: re-add lost __ref to ioremap_prot() to fix modpost warning |
||
|
Linus Torvalds
|
93397d3a2f |
LoongArch fixes for v6.6-rc3
-----BEGIN PGP SIGNATURE----- iQJKBAABCAA0FiEEzOlt8mkP+tbeiYy5AoYrw/LiJnoFAmUKki4WHGNoZW5odWFj YWlAa2VybmVsLm9yZwAKCRAChivD8uImepsVEACcMAw3/Gg3ldIDlV6mWSYGn6kA eF2Cc89q4C53CYYlYHalBqVdOObonR0g4roz385UjlGXeVtOuYzKB2DMy8GE3V7s 63Q82jpkGtgpJ9/md+2FnOoaT6CiN+kbcwdbSmEsz+9yht9IzRlO5R0urH92jwsU wpnFzGtn1kHgGv+yC8XQDvk5ZvYiiA9bWrXiaLl+aEF0qeQBhgI+f7+Jew/VWBNR ykH0TcOp0cjt7AqYlOHb3YXqwIO6U5sVLIfrHzCxKkrfeV/DE8J0FU3/YQ/okMr7 tjBJxS4o1UsNyT+9ItXjqYClOAy1IaW+2UmC8r2k79hZKEyicHu3/o7xpBCvoQoa 9OAKFAtO1UyX3h3uUynouaSXCuQ48GAetnkGMFuhuUVlF9Aq9OdA6lAWeuolkace VYs3djjkAvsWq6HH2tm5lpcq8jXsbc2QRbHl+f4BGgyoXtEk7NXsqfPcvJeFDMFF /PKYFQnPWebv4LoqxSNjN7S7S23N0k9tH+lITX8WvMJzRQaUTt4S19e7YHotNMty UXDBIW6mjVIOT11zzNcsEzkMXA/8Q4VvZbQy67nfweg8KMLMChBdkRphK+4pOLN/ 0Pvge3SAAVI/cdNWOxwqzvHvQbqVsjb4p4GmghPSLOojFPKW47ueWm8xeq/Hd05r ssZZGOC8/H1AqDvOIw== =EKBZ -----END PGP SIGNATURE----- Merge tag 'loongarch-fixes-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson Pull LoongArch fixes from Huacai Chen: "Fix lockdep, fix a boot failure, fix some build warnings, fix document links, and some cleanups" * tag 'loongarch-fixes-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: docs/zh_CN/LoongArch: Update the links of ABI docs/LoongArch: Update the links of ABI LoongArch: Don't inline kasan_mem_to_shadow()/kasan_shadow_to_mem() kasan: Cleanup the __HAVE_ARCH_SHADOW_MAP usage LoongArch: Set all reserved memblocks on Node#0 at initialization LoongArch: Remove dead code in relocate_new_kernel LoongArch: Use _UL() and _ULL() LoongArch: Fix some build warnings with W=1 LoongArch: Fix lockdep static memory detection |
||
Paolo Bonzini
|
5804c19b80 |
KVM/riscv fixes for 6.6, take #1
- Fix KVM_GET_REG_LIST API for ISA_EXT registers - Fix reading ISA_EXT register of a missing extension - Fix ISA_EXT register handling in get-reg-list test - Fix filtering of AIA registers in get-reg-list test -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEZdn75s5e6LHDQ+f/rUjsVaLHLAcFAmUMDssACgkQrUjsVaLH LAckSg/+IZ5DPvPs81rUpL3i1Z5SrK4jXWL2zyvMIksBEYmFD2NPNvinVZ4Sxv6u IzWNKJcAp4nA/+qPGPLXCURDe1W6PCDvO4SShjYm2UkPtNIfiskmFr3MunXZysgm I7USJgj9ev+46yfOnwlYrwpZ8sQk7Z6nLTI/6Osk4Q7Sm0Vjoobh6krub7LNjeKQ y6p+vxrXj+Owc5H9bgl0wAi6GOmOJKAM+cZU5DygQxjOgiUgNbOzsVgbLDTvExNq gISUU4PoAO7/U1NKEaaopbe7C0KNQHTnegedtXsDzg7WTBah77/MNBt4snbfiR27 6rODklZlG/kAGIHdVtYC+zf8AfPqvGTIT8SLGmzQlyVlHujFBGn0L41NmMzW+EeA 7UpfUk8vPiiGhefBE+Ml3yqiReogo+aRhL1mZoI39rPusd7DMnwx97KpBlAcYuTI PTgqycIMRmq2dSCHya+nrOVpwwV3Qx4G8Alpq1jOa7XDMeGMj4h521NQHjWckIK2 IJ2a0RtzB10+Z91nLV+amdAno326AnxJC7dR26O6uqVSPJy/nHE2GAc49gFKeWq6 QmzgzY1sU2Y02/TM8miyKSl3i+bpZSIPzXCKlOm1TowBKO+sfJzn/yMon9sVaVhb 4Wjgg3vgE74y9FVsL4JXR/PfrZH5Aq77J1R+/pMtsNTtVYrt1Sk= =ytFs -----END PGP SIGNATURE----- Merge tag 'kvm-riscv-fixes-6.6-1' of https://github.com/kvm-riscv/linux into HEAD KVM/riscv fixes for 6.6, take #1 - Fix KVM_GET_REG_LIST API for ISA_EXT registers - Fix reading ISA_EXT register of a missing extension - Fix ISA_EXT register handling in get-reg-list test - Fix filtering of AIA registers in get-reg-list test |
||
|
Linus Torvalds
|
3abc79dce6 |
Bug fixes for 6.6-rc3:
* Fix an integer overflow bug when processing an fsmap call.
* Fix crash due to CPU hot remove event racing with filesystem mount
operation.
* During read-only mount, XFS does not allow the contents of the log to be
recovered when there are one or more unrecognized rcompat features in the
primary superblock, since the log might have intent items which the kernel
does not know how to process.
* During recovery of log intent items, XFS now reserves log space sufficient
for one cycle of a permanent transaction to execute. Otherwise, this could
lead to livelocks due to non-availability of log space.
* On an fs which has an ondisk unlinked inode list, trying to delete a file
or allocating an O_TMPFILE file can cause the fs to the shutdown if the
first inode in the ondisk inode list is not present in the inode cache.
The bug is solved by explicitly loading the first inode in the ondisk
unlinked inode list into the inode cache if it is not already cached.
A similar problem arises when the uncached inode is present in the middle
of the ondisk unlinked inode list. This second bug is triggered when
executing operations like quotacheck and bulkstat. In this case, XFS now
reads in the entire ondisk unlinked inode list.
* Enable LARP mode only on recent v5 filesystems.
* Fix a out of bounds memory access in scrub.
* Fix a performance bug when locating the tail of the log during mounting a
filesystem.
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQjMC4mbgVeU7MxEIYH7y4RirJu9AUCZQkx4QAKCRAH7y4RirJu
9HrTAQD6QhvHkS43vueGOb4WISZPG/jMKJ/FjvwLZrIZ0erbJwEAtRWhClwFv3NZ
exJFtsmxrKC6Vifuo0pvfoCiK5mUvQ8=
=SrJR
-----END PGP SIGNATURE-----
Merge tag 'xfs-6.6-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Chandan Babu:
- Fix an integer overflow bug when processing an fsmap call
- Fix crash due to CPU hot remove event racing with filesystem mount
operation
- During read-only mount, XFS does not allow the contents of the log to
be recovered when there are one or more unrecognized rcompat features
in the primary superblock, since the log might have intent items
which the kernel does not know how to process
- During recovery of log intent items, XFS now reserves log space
sufficient for one cycle of a permanent transaction to execute.
Otherwise, this could lead to livelocks due to non-availability of
log space
- On an fs which has an ondisk unlinked inode list, trying to delete a
file or allocating an O_TMPFILE file can cause the fs to the shutdown
if the first inode in the ondisk inode list is not present in the
inode cache. The bug is solved by explicitly loading the first inode
in the ondisk unlinked inode list into the inode cache if it is not
already cached
A similar problem arises when the uncached inode is present in the
middle of the ondisk unlinked inode list. This second bug is
triggered when executing operations like quotacheck and bulkstat. In
this case, XFS now reads in the entire ondisk unlinked inode list
- Enable LARP mode only on recent v5 filesystems
- Fix a out of bounds memory access in scrub
- Fix a performance bug when locating the tail of the log during
mounting a filesystem
* tag 'xfs-6.6-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: use roundup_pow_of_two instead of ffs during xlog_find_tail
xfs: only call xchk_stats_merge after validating scrub inputs
xfs: require a relatively recent V5 filesystem for LARP mode
xfs: make inode unlinked bucket recovery work with quotacheck
xfs: load uncached unlinked inodes into memory on demand
xfs: reserve less log space when recovering log intent items
xfs: fix log recovery when unknown rocompat bits are set
xfs: reload entire unlinked bucket lists
xfs: allow inode inactivation during a ro mount log recovery
xfs: use i_prev_unlinked to distinguish inodes that are not on the unlinked list
xfs: remove CPU hotplug infrastructure
xfs: remove the all-mounts list
xfs: use per-mount cpumask to track nonempty percpu inodegc lists
xfs: fix an agbno overflow in __xfs_getfsmap_datadev
xfs: fix per-cpu CIL structure aggregation racing with dying cpus
xfs: fix select in config XFS_ONLINE_SCRUB_STATS
|
||
|
Linus Torvalds
|
725e2d7ec8 |
Fix a include/linux/atomic/atomic-arch-fallback.h breakage that generated
incorrect code, and fix a lockdep reporting race that may result in lockups. Signed-off-by: Ingo Molnar <mingo@kernel.org> -----BEGIN PGP SIGNATURE----- iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmUNZ+wRHG1pbmdvQGtl cm5lbC5vcmcACgkQEnMQ0APhK1iK+Q//XxvpwiSPOC6NI53bTmFtvbJCkGJr5taK a1C+4xql1/E8pc/ZQBYMziK824s03ybs1edktC21B5pRpjJZ7h2tPOyxmw8/FLP/ Qq1GouuneVq9GBcqG+ctjY6hnAt8rScGAPNHReyP6VzGD6/j1zvBI78MfNcfJzLV GEy8z+PsqJdyTfZ/eVf2eKLQMsH3zvRbWYOqk7uA//ld+hof8ZelxDLH7NeH5ZcU NrG/nP5qRToJFYddK548kmwsPsg9qPxd5Ke4S5t4+nGpBpVXerMN66Bopnn79dSa YP9wzPzimJHZEatJg//VmTMAsz4/OHhJC8LSN++QIFx/HXG8+QwjhwNkIYy8deGS hrC72LvxwTqRto3QWQ+Y/3MDKYDIRX8IKYSFGKqwLkvNmQ5mVcvLod3cCMinTlgg GDYEMStR4QoreeGiVZzqus+9QnZehwNYxrfd6KqRpGgqPjJbY6lK7KFzFLY4R5bg feYCdWYlQrb+pIxYZqjf7A4Xj7GeYrv99ggmvwRvL7RiWrDiUHjmnXyEgr9WaKSb NgfD4nnWQ2DSdPk+jL/TM9hRMI1vy8cGGoevsmFbJOuj2aQbStyGRp6GSMYU1UVP FkTurL7hPUanmqc1s+p5Rz1xYdoe/AfEOK53a0NljvaR+q5K6to4QyIL3el7xeMj 1jPiKV2CRJo= =hkE1 -----END PGP SIGNATURE----- Merge tag 'locking-urgent-2023-09-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fixes from Ingo Molnar: "Fix a include/linux/atomic/atomic-arch-fallback.h breakage that generated incorrect code, and fix a lockdep reporting race that may result in lockups" * tag 'locking-urgent-2023-09-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/seqlock: Do the lockdep annotation before locking in do_write_seqcount_begin_nested() locking/atomic: scripts: fix fallback ifdeffery |
||
|
Ingo Molnar
|
8bf0cdfac7 |
<linux/list.h>: Introduce the list_for_each_reverse() method
The list_head counterpart of list_for_each_entry_reverse() was missing, add it to complete the list handling APIs in <linux/list.h>. [ This new API is also relied on by a WIP scheduler patch, so this variant is not a theoretical possibility only. ] Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: linux-kernel@vger.kernel.org |
||
|
Linus Torvalds
|
27bbf45eae |
Networking fixes for 6.6-rc2, including fixes from netfilter and bpf
Current release - regressions:
- bpf: adjust size_index according to the value of KMALLOC_MIN_SIZE
- netfilter: fix entries val in rule reset audit log
- eth: stmmac: fix incorrect rxq|txq_stats reference
Previous releases - regressions:
- ipv4: fix null-deref in ipv4_link_failure
- netfilter:
- fix several GC related issues
- fix race between IPSET_CMD_CREATE and IPSET_CMD_SWAP
- eth: team: fix null-ptr-deref when team device type is changed
- eth: i40e: fix VF VLAN offloading when port VLAN is configured
- eth: ionic: fix 16bit math issue when PAGE_SIZE >= 64KB
Previous releases - always broken:
- core: fix ETH_P_1588 flow dissector
- mptcp: fix several connection hang-up conditions
- bpf:
- avoid deadlock when using queue and stack maps from NMI
- add override check to kprobe multi link attach
- hsr: properly parse HSRv1 supervisor frames.
- eth: igc: fix infinite initialization loop with early XDP redirect
- eth: octeon_ep: fix tx dma unmap len values in SG
- eth: hns3: fix GRE checksum offload issue
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEEg1AjqC77wbdLX2LbKSR5jcyPE6QFAmUMFG8SHHBhYmVuaUBy
ZWRoYXQuY29tAAoJECkkeY3MjxOksHAP+QE2eNf5yxo86dIS+3RQnOQ8kFBnNbEn
04lrheGnzG7PpNnGoCoTZna+xYQPYVLgbmmip2/CFnQvnQIsKyLQfCui85sfV2V9
KjUeE/kTgeC+jUQOWNDyz3zDP/MPC2LmiK8Gwyggvm9vFYn5tVZXC36aPZBZ7Vok
/DUW6iXyl31SeVGOOEKakcwn0GIYJSABhVFNsjrDe4tV+leUwvf8obAq3ZWxOGaU
D94ez28lSXgfOSWfQQ/l1rHI/yC0fr8HYyWJ60dNG2uS3fNEqT8LyqZfAUK24kVz
XbAGZa+GA7CDq3cVsU7vCWNWbB5fO+kXtmGOwPtuKtJQM5LPo4X77CuSHlpzdyvq
TuW0vxeVfdzAYVb3Zg+2QgWxDJjY0B8ujwdDWrnnKTPu4Ylhn6HLISXIlkMBoGwT
1/47TCnmn9t+lGagkMADppRRnJotHWObQG5wkzksqVa2CUB0HTESgbrm4rsxe6Ku
JiZhHbTiiPWy7LgY6EFtj/YGPvLs0CSltvh4QUsd+QtDTM/EN7y3HcHqkv88ropG
bSvJIh6WXdEJkwfSUdA0LECXSC6dizzZW2Y1glnT+7FMlhE1jVY4gruNJ37mCYMb
0gh9Zr76c2KYLA5vljGp6uo3j3A7wARJTdLfRFVcaFoz6NQmuFf9ZdBfDNDcymxs
AGvO3j55JAZf
=AoVg
-----END PGP SIGNATURE-----
Merge tag 'net-6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter and bpf.
Current release - regressions:
- bpf: adjust size_index according to the value of KMALLOC_MIN_SIZE
- netfilter: fix entries val in rule reset audit log
- eth: stmmac: fix incorrect rxq|txq_stats reference
Previous releases - regressions:
- ipv4: fix null-deref in ipv4_link_failure
- netfilter:
- fix several GC related issues
- fix race between IPSET_CMD_CREATE and IPSET_CMD_SWAP
- eth: team: fix null-ptr-deref when team device type is changed
- eth: i40e: fix VF VLAN offloading when port VLAN is configured
- eth: ionic: fix 16bit math issue when PAGE_SIZE >= 64KB
Previous releases - always broken:
- core: fix ETH_P_1588 flow dissector
- mptcp: fix several connection hang-up conditions
- bpf:
- avoid deadlock when using queue and stack maps from NMI
- add override check to kprobe multi link attach
- hsr: properly parse HSRv1 supervisor frames.
- eth: igc: fix infinite initialization loop with early XDP redirect
- eth: octeon_ep: fix tx dma unmap len values in SG
- eth: hns3: fix GRE checksum offload issue"
* tag 'net-6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (87 commits)
sfc: handle error pointers returned by rhashtable_lookup_get_insert_fast()
igc: Expose tx-usecs coalesce setting to user
octeontx2-pf: Do xdp_do_flush() after redirects.
bnxt_en: Flush XDP for bnxt_poll_nitroa0()'s NAPI
net: ena: Flush XDP packets on error.
net/handshake: Fix memory leak in __sock_create() and sock_alloc_file()
net: hinic: Fix warning-hinic_set_vlan_fliter() warn: variable dereferenced before check 'hwdev'
netfilter: ipset: Fix race between IPSET_CMD_CREATE and IPSET_CMD_SWAP
netfilter: nf_tables: fix memleak when more than 255 elements expired
netfilter: nf_tables: disable toggling dormant table state more than once
vxlan: Add missing entries to vxlan_get_size()
net: rds: Fix possible NULL-pointer dereference
team: fix null-ptr-deref when team device type is changed
net: bridge: use DEV_STATS_INC()
net: hns3: add 5ms delay before clear firmware reset irq source
net: hns3: fix fail to delete tc flower rules during reset issue
net: hns3: only enable unicast promisc when mac table full
net: hns3: fix GRE checksum offload issue
net: hns3: add cmdq check for vf periodic service task
net: stmmac: fix incorrect rxq|txq_stats reference
...
|
||
|
Linus Torvalds
|
b5cbe7c00a |
v6.6-rc3.vfs.ctime.revert
-----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZQsZLQAKCRCRxhvAZXjc op0vAP96hkSUnmXmxTr8GHId3yfElN8ZZ3aSfePeBdljjKEZVAEA2+cbHLy4GqRi TpjP1HNIdmtbVSC2ZnrgqkbwGageQgg= =s92y -----END PGP SIGNATURE----- Merge tag 'v6.6-rc3.vfs.ctime.revert' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs Pull finegrained timestamp reverts from Christian Brauner: "Earlier this week we sent a few minor fixes for the multi-grained timestamp work in [1]. While we were polishing those up after Linus realized that there might be a nicer way to fix them we received a regression report in [2] that fine grained timestamps break gnulib tests and thus possibly other tools. The kernel will elide fine-grain timestamp updates when no one is actively querying for them to avoid performance impacts. So a sequence like write(f1) stat(f2) write(f2) stat(f2) write(f1) stat(f1) may result in timestamp f1 to be older than the final f2 timestamp even though f1 was last written too but the second write didn't update the timestamp. Such plotholes can lead to subtle bugs when programs compare timestamps. For example, the nap() function in [2] will estimate that it needs to wait one ns on a fine-grain timestamp enabled filesytem between subsequent calls to observe a timestamp change. But in general we don't update timestamps with more than one jiffie if we think that no one is actively querying for fine-grain timestamps to avoid performance impacts. While discussing various fixes the decision was to go back to the drawing board and ultimately to explore a solution that involves only exposing such fine-grained timestamps to nfs internally and never to userspace. As there are multiple solutions discussed the honest thing to do here is not to fix this up or disable it but to cleanly revert. The general infrastructure will probably come back but there is no reason to keep this code in mainline. The general changes to timestamp handling are valid and a good cleanup that will stay. The revert is fully bisectable" Link: https://lore.kernel.org/all/20230918-hirte-neuzugang-4c2324e7bae3@brauner [1] Link: https://lore.kernel.org/all/bf0524debb976627693e12ad23690094e4514303.camel@linuxfromscratch.org [2] * tag 'v6.6-rc3.vfs.ctime.revert' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: Revert "fs: add infrastructure for multigrain timestamps" Revert "btrfs: convert to multigrain timestamps" Revert "ext4: switch to multigrain timestamps" Revert "xfs: switch to multigrain timestamps" Revert "tmpfs: add support for multigrain timestamps" |
||
|
Ingo Molnar
|
1632d47fae |
sched/headers: Standardize the <linux/sched/smt.h> header guard #endif
Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Ingo Molnar
|
0f9a1a4d23 |
sched/headers: Standardize the <linux/sched/type.h> header guard #endif
Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Ingo Molnar
|
6eddb116dd |
sched/headers: Standardize the <linux/sched/vhost_task.h> header guard name
Use the same _LINUX_SCHED_ prefix nomenclature as the other 29 header guards in include/linux/sched/ do. Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Ingo Molnar
|
3ba78da711 |
sched/headers: Add header guard to <linux/sched/deadline.h>
It's the only non-trivial header in include/linux/sched/ missing a header guard. Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
Finn Thain
|
87c3a5893e |
sched/core: Optimize in_task() and in_interrupt() a bit
Except on x86, preempt_count is always accessed with READ_ONCE().
Repeated invocations in macros like irq_count() produce repeated loads.
These redundant instructions appear in various fast paths. In the one
shown below, for example, irq_count() is evaluated during kernel entry
if !tick_nohz_full_cpu(smp_processor_id()).
0001ed0a <irq_enter_rcu>:
1ed0a: 4e56 0000 linkw %fp,#0
1ed0e: 200f movel %sp,%d0
1ed10: 0280 ffff e000 andil #-8192,%d0
1ed16: 2040 moveal %d0,%a0
1ed18: 2028 0008 movel %a0@(8),%d0
1ed1c: 0680 0001 0000 addil #65536,%d0
1ed22: 2140 0008 movel %d0,%a0@(8)
1ed26: 082a 0001 000f btst #1,%a2@(15)
1ed2c: 670c beqs 1ed3a <irq_enter_rcu+0x30>
1ed2e: 2028 0008 movel %a0@(8),%d0
1ed32: 2028 0008 movel %a0@(8),%d0
1ed36: 2028 0008 movel %a0@(8),%d0
1ed3a: 4e5e unlk %fp
1ed3c: 4e75 rts
This patch doesn't prevent the pointless btst and beqs instructions
above, but it does eliminate 2 of the 3 pointless move instructions
here and elsewhere.
On x86, preempt_count is per-cpu data and the problem does not arise
presumably because the compiler is free to optimize more effectively.
This patch was tested on m68k and x86. I was expecting no changes
to object code for x86 and mostly that's what I saw. However, there
were a few places where code generation was perturbed for some reason.
The performance issue addressed here is minor on uniprocessor m68k. I
got a 0.01% improvement from this patch for a simple "find /sys -false"
benchmark. For architectures and workloads susceptible to cache line bounce
the improvement is expected to be larger. The only SMP architecture I have
is x86, and as x86 unaffected I have not done any further measurements.
Fixes:
|
||
Sebastian Andrzej Siewior
|
41b43b6c6e |
locking/seqlock: Do the lockdep annotation before locking in do_write_seqcount_begin_nested()
It was brought up by Tetsuo that the following sequence:
write_seqlock_irqsave()
printk_deferred_enter()
could lead to a deadlock if the lockdep annotation within
write_seqlock_irqsave() triggers.
The problem is that the sequence counter is incremented before the lockdep
annotation is performed. The lockdep splat would then attempt to invoke
printk() but the reader side, of the same seqcount, could have a
tty_port::lock acquired waiting for the sequence number to become even again.
The other lockdep annotations come before the actual locking because "we
want to see the locking error before it happens". There is no reason why
seqcount should be different here.
Do the lockdep annotation first then perform the locking operation (the
sequence increment).
Fixes:
|
||
Christian Brauner
|
647aa76828 |
Revert "fs: add infrastructure for multigrain timestamps"
This reverts commit
|
||
Mark Rutland
|
6d2779ecae |
locking/atomic: scripts: fix fallback ifdeffery
Since commit: |
||
Huacai Chen
|
2a86f1b56a |
kasan: Cleanup the __HAVE_ARCH_SHADOW_MAP usage
As Linus suggested, __HAVE_ARCH_XYZ is "stupid" and "having historical uses of it doesn't make it good". So migrate __HAVE_ARCH_SHADOW_MAP to separate macros named after the respective functions. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
Johannes Weiner
|
9ea9cb00a8 |
mm: memcontrol: fix GFP_NOFS recursion in memory.high enforcement
Breno and Josef report a deadlock scenario from cgroup reclaim re-entering the filesystem: [ 361.546690] ====================================================== [ 361.559210] WARNING: possible circular locking dependency detected [ 361.571703] 6.5.0-0_fbk700_debug_rc0_kbuilder_13159_gbf787a128001 #1 Tainted: G S E [ 361.589704] ------------------------------------------------------ [ 361.602277] find/9315 is trying to acquire lock: [ 361.611625] ffff88837ba140c0 (&delayed_node->mutex){+.+.}-{4:4}, at: __btrfs_release_delayed_node+0x68/0x4f0 [ 361.631437] [ 361.631437] but task is already holding lock: [ 361.643243] ffff8881765b8678 (btrfs-tree-01){++++}-{4:4}, at: btrfs_tree_read_lock+0x1e/0x40 [ 362.904457] mutex_lock_nested+0x1c/0x30 [ 362.912414] __btrfs_release_delayed_node+0x68/0x4f0 [ 362.922460] btrfs_evict_inode+0x301/0x770 [ 362.982726] evict+0x17c/0x380 [ 362.988944] prune_icache_sb+0x100/0x1d0 [ 363.005559] super_cache_scan+0x1f8/0x260 [ 363.013695] do_shrink_slab+0x2a2/0x540 [ 363.021489] shrink_slab_memcg+0x237/0x3d0 [ 363.050606] shrink_slab+0xa7/0x240 [ 363.083382] shrink_node_memcgs+0x262/0x3b0 [ 363.091870] shrink_node+0x1a4/0x720 [ 363.099150] shrink_zones+0x1f6/0x5d0 [ 363.148798] do_try_to_free_pages+0x19b/0x5e0 [ 363.157633] try_to_free_mem_cgroup_pages+0x266/0x370 [ 363.190575] reclaim_high+0x16f/0x1f0 [ 363.208409] mem_cgroup_handle_over_high+0x10b/0x270 [ 363.246678] try_charge_memcg+0xaf2/0xc70 [ 363.304151] charge_memcg+0xf0/0x350 [ 363.320070] __mem_cgroup_charge+0x28/0x40 [ 363.328371] __filemap_add_folio+0x870/0xd50 [ 363.371303] filemap_add_folio+0xdd/0x310 [ 363.399696] __filemap_get_folio+0x2fc/0x7d0 [ 363.419086] pagecache_get_page+0xe/0x30 [ 363.427048] alloc_extent_buffer+0x1cd/0x6a0 [ 363.435704] read_tree_block+0x43/0xc0 [ 363.443316] read_block_for_search+0x361/0x510 [ 363.466690] btrfs_search_slot+0xc8c/0x1520 This is caused by the mem_cgroup_handle_over_high() not respecting the gfp_mask of the allocation context. We used to only call this function on resume to userspace, where no locks were held. But |
||
Ziyang Xuan
|
4920327601 |
team: fix null-ptr-deref when team device type is changed
Get a null-ptr-deref bug as follows with reproducer [1].
BUG: kernel NULL pointer dereference, address: 0000000000000228
...
RIP: 0010:vlan_dev_hard_header+0x35/0x140 [8021q]
...
Call Trace:
<TASK>
? __die+0x24/0x70
? page_fault_oops+0x82/0x150
? exc_page_fault+0x69/0x150
? asm_exc_page_fault+0x26/0x30
? vlan_dev_hard_header+0x35/0x140 [8021q]
? vlan_dev_hard_header+0x8e/0x140 [8021q]
neigh_connected_output+0xb2/0x100
ip6_finish_output2+0x1cb/0x520
? nf_hook_slow+0x43/0xc0
? ip6_mtu+0x46/0x80
ip6_finish_output+0x2a/0xb0
mld_sendpack+0x18f/0x250
mld_ifc_work+0x39/0x160
process_one_work+0x1e6/0x3f0
worker_thread+0x4d/0x2f0
? __pfx_worker_thread+0x10/0x10
kthread+0xe5/0x120
? __pfx_kthread+0x10/0x10
ret_from_fork+0x34/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1b/0x30
[1]
$ teamd -t team0 -d -c '{"runner": {"name": "loadbalance"}}'
$ ip link add name t-dummy type dummy
$ ip link add link t-dummy name t-dummy.100 type vlan id 100
$ ip link add name t-nlmon type nlmon
$ ip link set t-nlmon master team0
$ ip link set t-nlmon nomaster
$ ip link set t-dummy up
$ ip link set team0 up
$ ip link set t-dummy.100 down
$ ip link set t-dummy.100 master team0
When enslave a vlan device to team device and team device type is changed
from non-ether to ether, header_ops of team device is changed to
vlan_header_ops. That is incorrect and will trigger null-ptr-deref
for vlan->real_dev in vlan_dev_hard_header() because team device is not
a vlan device.
Cache eth_header_ops in team_setup(), then assign cached header_ops to
header_ops of team net device when its type is changed from non-ether
to ether to fix the bug.
Fixes:
|
||
|
Linus Torvalds
|
2cf0f71562 |
NFS Client Bugfixes for Linux 6.6
Bugfixes:
* Various O_DIRECT related fixes from Trond
* Error handling
* Locking issues
* Use the correct commit infor for joining page groups
* Fixes for rescheduling IO
* Sunrpc bad verifier fixes
* Report EINVAL errors from connect()
* Revalidate creds that the server has rejected
* Revert "SUNRPC: Fail faster on bad verifier"
* Fix pNFS session trunking when MDS=DS
* Fix zero-value filehandles for post-open getattr operations
* Fix compiler warning about tautological comparisons
* Revert "SUNRPC: clean up integer overflow check" before Trond's fix
-----BEGIN PGP SIGNATURE-----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=M6aI
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-6.6-2' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client fixes from Anna Schumaker:
"Various O_DIRECT related fixes from Trond:
- Error handling
- Locking issues
- Use the correct commit info for joining page groups
- Fixes for rescheduling IO
Sunrpc bad verifier fixes:
- Report EINVAL errors from connect()
- Revalidate creds that the server has rejected
- Revert "SUNRPC: Fail faster on bad verifier"
Misc:
- Fix pNFS session trunking when MDS=DS
- Fix zero-value filehandles for post-open getattr operations
- Fix compiler warning about tautological comparisons
- Revert 'SUNRPC: clean up integer overflow check' before Trond's fix"
* tag 'nfs-for-6.6-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
SUNRPC: Silence compiler complaints about tautological comparisons
Revert "SUNRPC: clean up integer overflow check"
NFSv4.1: fix zero value filehandle in post open getattr
NFSv4.1: fix pnfs MDS=DS session trunking
Revert "SUNRPC: Fail faster on bad verifier"
SUNRPC: Mark the cred for revalidation if the server rejects it
NFS/pNFS: Report EINVAL errors from connect() to the server
NFS: More fixes for nfs_direct_write_reschedule_io()
NFS: Use the correct commit info in nfs_join_page_group()
NFS: More O_DIRECT accounting fixes for error paths
NFS: Fix O_DIRECT locking issues
NFS: Fix error handling for O_DIRECT write scheduling
|
||
Ilya Dryomov
|
d57125b55a |
Revert "ceph: make members in struct ceph_mds_request_args_ext a union"
This reverts commit
|
||
Elliot Berman
|
fbaa6a181a |
sched/core: Remove ifdeffery for saved_state
In preparation for freezer to also use saved_state, remove the CONFIG_PREEMPT_RT compilation guard around saved_state. On the arm64 platform I tested which did not have CONFIG_PREEMPT_RT, there was no statistically significant deviation by applying this patch. Test methodology: perf bench sched message -g 40 -l 40 Signed-off-by: Elliot Berman <quic_eberman@quicinc.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Linus Torvalds
|
e789286468 |
Misc fixes:
- Fix an UV boot crash, - Skip spurious ENDBR generation on _THIS_IP_, - Fix ENDBR use in putuser() asm methods, - Fix corner case boot crashes on 5-level paging, - and fix a false positive WARNING on LTO kernels. Signed-off-by: Ingo Molnar <mingo@kernel.org> -----BEGIN PGP SIGNATURE----- iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmUHOrwRHG1pbmdvQGtl cm5lbC5vcmcACgkQEnMQ0APhK1j6Jw/+PjUfh/4+KM/Z8VzcBy2UhY3NMF2ptGCN 47FPLy+8ADqOvIfgsPsBEO9VXwdvkHfH64YWRUlULjvPNOSs+37drBYMe9AI9xKE u6NhoBHmsnOtoLkBFIQYlJys9GyAeoMlwSSHxzRwQS+3VztRjoH636jiBcg/h7DR zhakfnJD1SSOZuEyyDPnO0uIUarrcqC2jdZwucSqZnvZFdA/pexUHQEe2RtMXLln EIA5kuEo7UdADcSr/Lbty7MKO+6xpRTjxF0yNItPtwPWsnxrSAC7P+dQ37uB975U Z0CJ/kw54XG5Sdoech7XCWYmJzDxSPhiziA1USKpZJMo5phAG/apTJK6NG4TG94r U+3QhLopUoSd8N74/VtZn0FjOrMsk7YKD5o8twlTbpCd2VaiJk4X5oBIns6Tvq05 0Vmsx15XO3mEzg1wWbbdjhjHW0czRgBpikS9QyexZKVkukYcW8QT6bk1gK1ypg94 do4PHKB53QIt31dedy/ddpQj4u1sJ4+a9/+IG29kjUB33M4+uFedtw11vfe+CDN0 XLRc6HfPblogIIEO/figJgwSq/TPCOsNHTwKkejq+D1Ey6DsrnX9Gg4BWVz/3dDW 84SW7TaO2FGEDh4NkR2ijkZlbpofFnCvhCh/uohodPlqDrTVTuRKCZW9I5plmGVa qeXUpNDFs1E= =BMjT -----END PGP SIGNATURE----- Merge tag 'x86-urgent-2023-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Misc fixes: - Fix an UV boot crash - Skip spurious ENDBR generation on _THIS_IP_ - Fix ENDBR use in putuser() asm methods - Fix corner case boot crashes on 5-level paging - and fix a false positive WARNING on LTO kernels" * tag 'x86-urgent-2023-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/purgatory: Remove LTO flags x86/boot/compressed: Reserve more memory for page tables x86/ibt: Avoid duplicate ENDBR in __put_user_nocheck*() x86/ibt: Suppress spurious ENDBR x86/platform/uv: Use alternate source for socket to node data |
||
|
Linus Torvalds
|
3fde3003ca |
Regression and bug fixes for ext4.
-----BEGIN PGP SIGNATURE----- iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmUGh1YACgkQ8vlZVpUN gaN9lQgAqmMWu3xLwOERgVbK3CYT8WMcv0m9/by+vSwghCoPVDWWENgEgAzo4YpK Lsp4q62wHaWs6AzvJEaJ8ryedo7e4FUHxcvp2f6dCuOPadOEZZZTa4G5fAr0kYXS TIoaFtv6F2QVnGU6Y5lhtfYzmgLRdLL0B6MfSTYGO2MSREqxapvfxyGBQdkOuXfO UEtrUUEqQ2GdDcKp+FRRnaUvNaTPEESY8d5eVwrMmyUhQWUQL/N2BPbFkk1TP6RG MLDNsUZpdhZvLs6qLuR7dvO5wa2fshvRJIXlPINM0R0as5LmHqVL/ifCNkCn4W+k ZNvdSPhqew68KHHq3sYFtm9rbZ3YOA== =DopS -----END PGP SIGNATURE----- Merge tag 'ext4_for_linus-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 fixes from Ted Ts'o: "Regression and bug fixes for ext4" * tag 'ext4_for_linus-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: fix rec_len verify error ext4: do not let fstrim block system suspend ext4: move setting of trimmed bit into ext4_try_to_trim_range() jbd2: Fix memory leak in journal_init_common() jbd2: Remove page size assumptions buffer: Make bh_offset() work for compound pages |
||
|
Linus Torvalds
|
ad8a69f361 |
SCSI fixes on 20230916
16 small(ish) fixes all in drivers. The major fixes are in pm8001 (fixes MSI-X issue going back to its origin), the qla2xxx endianness fix, which fixes a bug on big endian and the lpfc ones which can cause an oops on module removal without them. Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com> -----BEGIN PGP SIGNATURE----- iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZQXNvyYcamFtZXMuYm90 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishRKxAP4kCOBR UOGLJJdhmotofj9GX0Rr1qAFheJmTSAT6ctAOgD+IWucKDqKfbRLbmzqiSvmWmul P0STz4VnUKs9LqdLyok= =3wre -----END PGP SIGNATURE----- Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "16 small(ish) fixes all in drivers. The major fixes are in pm8001 (fixes MSI-X issue going back to its origin), the qla2xxx endianness fix, which fixes a bug on big endian and the lpfc ones which can cause an oops on module removal without them" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: lpfc: Prevent use-after-free during rmmod with mapped NVMe rports scsi: lpfc: Early return after marking final NLP_DROPPED flag in dev_loss_tmo scsi: lpfc: Fix the NULL vs IS_ERR() bug for debugfs_create_file() scsi: target: core: Fix target_cmd_counter leak scsi: pm8001: Setup IRQs on resume scsi: pm80xx: Avoid leaking tags when processing OPC_INB_SET_CONTROLLER_CONFIG command scsi: pm80xx: Use phy-specific SAS address when sending PHY_START command scsi: ufs: core: Poll HCS.UCRDY before issuing a UIC command scsi: ufs: core: Move __ufshcd_send_uic_cmd() outside host_lock scsi: qedf: Add synchronization between I/O completions and abort scsi: target: Replace strlcpy() with strscpy() scsi: qla2xxx: Fix NULL vs IS_ERR() bug for debugfs_create_dir() scsi: qla2xxx: Use raw_smp_processor_id() instead of smp_processor_id() scsi: qla2xxx: Correct endianness for rqstlen and rsplen scsi: ppa: Fix accidentally reversed conditions for 16-bit and 32-bit EPP scsi: megaraid_sas: Fix deadlock on firmware crashdump |
||
|
Linus Torvalds
|
cc3e5afc6a |
ata changes for 6.6-rc2
- Fix link power management transitions to disallow unsupported
states (Niklas).
- A small string handling fix for the sata_mv driver (Christophe).
- Clear port pending interrupts before reset, as per AHCI
specifications (Szuying). Followup fixes for this one are to not
clear ATA_PFLAG_EH_PENDING in ata_eh_reset() to allow EH to
continue on with other actions recorded with error interrupts
triggered before EH completes. A~Nd an additional fix to avoid
thawing a port twice in EH (Niklas).
- Small code style fixes in the pata_parport driver to silence the
build bot as it keeps complaining about bad indentation (me).
- A fix for the recent CDL code to avoid fetching sense data for
successful commands when not necessary for correct operation
(Niklas).
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCZQWcYAAKCRDdoc3SxdoY
dg0HAQDxkfzueH5T00LSsg9+jI73eMScmC7asR3cbwmEiTRATgEAxpWUgaR7e7YP
ZM9XWTyfcCYTfAEaJduS5a6ThHl3pAI=
=gTtf
-----END PGP SIGNATURE-----
Merge tag 'ata-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ata fixes from Damien Le Moal:
- Fix link power management transitions to disallow unsupported states
(Niklas)
- A small string handling fix for the sata_mv driver (Christophe)
- Clear port pending interrupts before reset, as per AHCI
specifications (Szuying).
Followup fixes for this one are to not clear ATA_PFLAG_EH_PENDING in
ata_eh_reset() to allow EH to continue on with other actions recorded
with error interrupts triggered before EH completes. And an
additional fix to avoid thawing a port twice in EH (Niklas)
- Small code style fixes in the pata_parport driver to silence the
build bot as it keeps complaining about bad indentation (me)
- A fix for the recent CDL code to avoid fetching sense data for
successful commands when not necessary for correct operation (Niklas)
* tag 'ata-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: libata-core: fetch sense data for successful commands iff CDL enabled
ata: libata-eh: do not thaw the port twice in ata_eh_reset()
ata: libata-eh: do not clear ATA_PFLAG_EH_PENDING in ata_eh_reset()
ata: pata_parport: Fix code style issues
ata: libahci: clear pending interrupt status
ata: sata_mv: Fix incorrect string length computation in mv_dump_mem()
ata: libata: disallow dev-initiated LPM transitions to unsupported states
|
||
|
Linus Torvalds
|
c37f8efcbc |
Main thing is the removal of 'probe_new' because all i2c client drivers
are converted now. Thanks Uwe, this marks the end of a long conversion process. Other than that, we have a few Kconfig updates and driver bugfixes. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEOZGx6rniZ1Gk92RdFA3kzBSgKbYFAmUFekwACgkQFA3kzBSg Kbbuag//WWvlEdixGIHwjiToGm4zvpVdV5txr2L1p1xWdXSrXtCVUifgvg6tTFj8 04hyuEP0c8ml90ZpBb6AMSggNGN09UdaMqb+dj52XBFbqsFOyCjXjy8bHOWZjJ5C /3N9/qUpDW4aJ3IBSQgLp+tcW+r6ulGa7KmZGazKkKSLiDIsqS4UicgEzLCA0Wig Zidy7Eaq6oo+nGtZH8UOava+o4P9nIrKRf/ILyXK8amFat0rTD1eT+fc7TvI5iC7 cZ5oFCAsaL1Jz7LNQxiCEQmQWBZOpyUbQlOfT2MCMNhWJG0x6FpF1cYqHHarNEJh UDxGQHG0Dj+AHtuZ4D4qAMxFlEYTVVNVNhSea02mxlqcOfbvvC73YfHAZIUsNdPt wStg+eSJjHAt/omqzOTTLEJAYnCWvjxc6+7/PN0HjLAipaR/KH1p67mCPKx5y/lt +OhvOS2eOpHWwiE9OZZCARqX5HlDJpGpK4TFy2rMOJvKnvYSzkHOd7Zy6Q9gRCW7 vVeJb1h1tI10RAufk8Rxfp3g8UiAFF8F1rxjDAgmMpGVTqM+TIM5Z2/b2vZdNU1R g1mta5OtDzVILs1uwkzS/opSsGvm0e4kDDREyb0spZusi6GZbni89+u93AXhCnkl UVmnz65CvQ7eiE9RGLXnsAIIgDdiO7JOAS2ALzK8/lPs8eXs3fU= =hFC5 -----END PGP SIGNATURE----- Merge tag 'i2c-for-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "The main thing is the removal of 'probe_new' because all i2c client drivers are converted now. Thanks Uwe, this marks the end of a long conversion process. Other than that, we have a few Kconfig updates and driver bugfixes" * tag 'i2c-for-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: cadence: Fix the kernel-doc warnings i2c: aspeed: Reset the i2c controller when timeout occurs i2c: I2C_MLXCPLD on ARM64 should depend on ACPI i2c: Make I2C_ATR invisible i2c: Drop legacy callback .probe_new() w1: ds2482: Switch back to use struct i2c_driver's .probe() |
||
David S. Miller
|
1612cc4b14 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Alexei Starovoitov says: ==================== The following pull-request contains BPF updates for your *net* tree. We've added 21 non-merge commits during the last 8 day(s) which contain a total of 21 files changed, 450 insertions(+), 36 deletions(-). The main changes are: 1) Adjust bpf_mem_alloc buckets to match ksize(), from Hou Tao. 2) Check whether override is allowed in kprobe mult, from Jiri Olsa. 3) Fix btf_id symbol generation with ld.lld, from Jiri and Nick. 4) Fix potential deadlock when using queue and stack maps from NMI, from Toke Høiland-Jørgensen. Please consider pulling these changes from: git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf.git Thanks a lot! Also thanks to reporters, reviewers and testers of commits in this pull-request: Alan Maguire, Biju Das, Björn Töpel, Dan Carpenter, Daniel Borkmann, Eduard Zingerman, Hsin-Wei Hung, Marcus Seyfarth, Nathan Chancellor, Satya Durga Srinivasu Prabhala, Song Liu, Stephen Rothwell ==================== Signed-off-by: David S. Miller <davem@davemloft.net> |