Commit graph

766,468 commits

Author SHA1 Message Date
Tonghao Zhang
7e878b605f bonding: introduce link change helper
Introduce an new common helper to avoid redundancy.

Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-17 15:51:13 -04:00
William Tu
02f99df187 erspan: fix invalid erspan version.
ERSPAN only support version 1 and 2.  When packets send to an
erspan device which does not have proper version number set,
drop the packet.  In real case, we observe multicast packets
sent to the erspan pernet device, erspan0, which does not have
erspan version configured.

Reported-by: Greg Rose <gvrose8192@gmail.com>
Signed-off-by: William Tu <u9012063@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-17 15:48:49 -04:00
David S. Miller
10e361e100 Merge branch 'tcp-default-RACK-loss-recovery'
Yuchung Cheng says:

====================
tcp: default RACK loss recovery

This patch set implements the features correspond to the
draft-ietf-tcpm-rack-03 version of the RACK draft.
https://datatracker.ietf.org/meeting/101/materials/slides-101-tcpm-update-on-tcp-rack-00

1. SACK: implement equivalent DUPACK threshold heuristic in RACK to
   replace existing RFC6675 recovery (tcp_mark_head_lost).

2. Non-SACK: simplify RFC6582 NewReno implementation

3. RTO: apply RACK's time-based approach to avoid spuriouly
   marking very recently sent packets lost.

4. with (1)(2)(3), make RACK the exclusive fast recovery mechanism to
   mark losses based on time on S/ACK. Tail loss probe and F-RTO remain
   enabled by default as complementary mechanisms to send probes in
   CA_Open and CA_Loss states. The probes would solicit S/ACKs to trigger
   RACK time-based loss detection.

All Google web and internal servers have been running RACK-only mode
(4) for a while now. a/b experiments indicate RACK/TLP on average
reduces recovery latency by 10% compared to RFC6675. RFC6675
is default-off now but can be enabled by disabling RACK (sysctl
net.ipv4.tcp_recovery=0) for unseen issues.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-17 15:41:30 -04:00
Yuchung Cheng
56f8c5d78f tcp: don't mark recently sent packets lost on RTO
An RTO event indicates the head has not been acked for a long time
after its last (re)transmission. But the other packets are not
necessarily lost if they have been only sent recently (for example
due to application limit). This patch would prohibit marking packets
sent within an RTT to be lost on RTO event, using similar logic in
TCP RACK detection.

Normally the head (SND.UNA) would be marked lost since RTO should
fire strictly after the head was sent. An exception is when the
most recent RACK RTT measurement is larger than the (previous)
RTO. To address this exception the head is always marked lost.

Congestion control interaction: since we may not mark every packet
lost, the congestion window may be more than 1 (inflight plus 1).
But only one packet will be retransmitted after RTO, since
tcp_retransmit_timer() calls tcp_retransmit_skb(...,segs=1). The
connection still performs slow start from one packet (with Cubic
congestion control).

This commit was tested in an A/B test with Google web servers,
and showed a reduction of 2% in (spurious) retransmits post
timeout (SlowStartRetrans), and correspondingly reduced DSACKs
(DSACKIgnoredOld) by 7%.

Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: Priyaranjan Jha <priyarjha@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-17 15:41:29 -04:00
Yuchung Cheng
b8fef65a8a tcp: new helper tcp_rack_skb_timeout
Create and export a new helper tcp_rack_skb_timeout and move tcp_is_rack
to prepare the final RTO change.

Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: Priyaranjan Jha <priyarjha@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-17 15:41:29 -04:00
Yuchung Cheng
c77d62ffae tcp: separate loss marking and state update on RTO
Previously when TCP times out, it first updates cwnd and ssthresh,
marks packets lost, and then updates congestion state again. This
was fine because everything not yet delivered is marked lost,
so the inflight is always 0 and cwnd can be safely set to 1 to
retransmit one packet on timeout.

But the inflight may not always be 0 on timeout if TCP changes to
mark packets lost based on packet sent time. Therefore we must
first mark the packet lost, then set the cwnd based on the
(updated) inflight.

This is not a pure refactor. Congestion control may potentially
break if it uses (not yet updated) inflight to compute ssthresh.
Fortunately all existing congestion control modules does not do that.
Also it changes the inflight when CA_LOSS_EVENT is called, and only
westwood processes such an event but does not use inflight.

This change has two other minor side benefits:
1) consistent with Fast Recovery s.t. the inflight is updated
   first before tcp_enter_recovery flips state to CA_Recovery.

2) avoid intertwining loss marking with state update, making the
   code more readable.

Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: Priyaranjan Jha <priyarjha@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-17 15:41:29 -04:00
Yuchung Cheng
2ad55f5660 tcp: new helper tcp_timeout_mark_lost
Refactor using a new helper, tcp_timeout_mark_loss(), that marks packets
lost upon RTO.

Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: Priyaranjan Jha <priyarjha@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-17 15:41:29 -04:00
Yuchung Cheng
d716bfdb10 tcp: account lost retransmit after timeout
The previous approach for the lost and retransmit bits was to
wipe the slate clean: zero all the lost and retransmit bits,
correspondingly zero the lost_out and retrans_out counters, and
then add back the lost bits (and correspondingly increment lost_out).

The new approach is to treat this very much like marking packets
lost in fast recovery. We don’t wipe the slate clean. We just say
that for all packets that were not yet marked sacked or lost, we now
mark them as lost in exactly the same way we do for fast recovery.

This fixes the lost retransmit accounting at RTO time and greatly
simplifies the RTO code by sharing much of the logic with Fast
Recovery.

Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: Priyaranjan Jha <priyarjha@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-17 15:41:29 -04:00
Yuchung Cheng
6ac06ecd3a tcp: simpler NewReno implementation
This is a rewrite of NewReno loss recovery implementation that is
simpler and standalone for readability and better performance by
using less states.

Note that NewReno refers to RFC6582 as a modification to the fast
recovery algorithm. It is used only if the connection does not
support SACK in Linux. It should not to be confused with the Reno
(AIMD) congestion control.

Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: Priyaranjan Jha <priyarjha@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-17 15:41:28 -04:00
Yuchung Cheng
b38a51fec1 tcp: disable RFC6675 loss detection
This patch disables RFC6675 loss detection and make sysctl
net.ipv4.tcp_recovery = 1 controls a binary choice between RACK
(1) or RFC6675 (0).

Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: Priyaranjan Jha <priyarjha@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-17 15:41:28 -04:00
Yuchung Cheng
20b654dfe1 tcp: support DUPACK threshold in RACK
This patch adds support for the classic DUPACK threshold rule
(#DupThresh) in RACK.

When the number of packets SACKed is greater or equal to the
threshold, RACK sets the reordering window to zero which would
immediately mark all the unsacked packets below the highest SACKed
sequence lost. Since this approach is known to not work well with
reordering, RACK only uses it if no reordering has been observed.

The DUPACK threshold rule is a particularly useful extension to the
fast recoveries triggered by RACK reordering timer. For example
data-center transfers where the RTT is much smaller than a timer
tick, or high RTT path where the default RTT/4 may take too long.

Note that this patch differs slightly from RFC6675. RFC6675
considers a packet lost when at least #DupThresh higher-sequence
packets are SACKed.

With RACK, for connections that have seen reordering, RACK
continues to use a dynamically-adaptive time-based reordering
window to detect losses. But for connections on which we have not
yet seen reordering, this patch considers a packet lost when at
least one higher sequence packet is SACKed and the total number
of SACKed packets is at least DupThresh. For example, suppose a
connection has not seen reordering, and sends 10 packets, and
packets 3, 5, 7 are SACKed. RFC6675 considers packets 1 and 2
lost. RACK considers packets 1, 2, 4, 6 lost.

There is some small risk of spurious retransmits here due to
reordering. However, this is mostly limited to the first flight of
a connection on which the sender receives SACKs from reordering.
And RFC 6675 and FACK loss detection have a similar risk on the
first flight with reordering (it's just that the risk of spurious
retransmits from reordering was slightly narrower for those older
algorithms due to the margin of 3*MSS).

Also the minimum reordering window is reduced from 1 msec to 0
to recover quicker on short RTT transfers. Therefore RACK is more
aggressive in marking packets lost during recovery to reduce the
reordering window timeouts.

Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: Priyaranjan Jha <priyarjha@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-17 15:41:28 -04:00
Arnaldo Carvalho de Melo
029c75e5cf perf tools: No need to unconditionally read the max_stack sysctls
Let tools that need to have those variables with the sysctl current
values use a function that will read them.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-1ljj3oeo5kpt2n1icfd9vowe@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-05-17 16:31:32 -03:00
Ivan Khoronzhuk
9611d6d6e2 net: ethernet: ti: cpsw: disable mq feature for "AM33xx ES1.0" devices
The early versions of am33xx devices, related to ES1.0 SoC revision
have errata limiting mq support. That's the same errata as
commit 7da1160002 ("drivers: net: cpsw: add am335x errata workarround for
interrutps")

AM33xx Errata [1] Advisory 1.0.9
http://www.ti.com/lit/er/sprz360f/sprz360f.pdf

After additional investigation were found that drivers w/a is
propagated on all AM33xx SoCs and on DM814x. But the errata exists
only for ES1.0 of AM33xx family, limiting mq support for revisions
after ES1.0. So, disable mq support only for related SoCs and use
separate polls for revisions allowing mq.

Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-17 15:11:55 -04:00
Arnaldo Carvalho de Melo
9ac94e31ca perf tools: Read the cache line size lazily
It is not read as commonly as 'page_size', so it makes sense to read it
lazily, caching its value when it is first read.

Less files open unconditionally at startup.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-35xhrq91u94uc1djtclek1ie@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-05-17 16:03:34 -03:00
Thomas Gleixner
fed71f7d98 x86/apic/x2apic: Initialize cluster ID properly
Rick bisected a regression on large systems which use the x2apic cluster
mode for interrupt delivery to the commit wich reworked the cluster
management.

The problem is caused by a missing initialization of the clusterid field
in the shared cluster data structures. So all structures end up with
cluster ID 0 which only allows sharing between all CPUs which belong to
cluster 0. All other CPUs with a cluster ID > 0 cannot share the data
structure because they cannot find existing data with their cluster
ID. This causes malfunction with IPIs because IPIs are sent to the wrong
cluster and the caller waits for ever that the target CPU handles the IPI.

Add the missing initialization when a upcoming CPU is the first in a
cluster so that the later booting CPUs can find the data and share it for
proper operation.

Fixes: 023a611748 ("x86/apic/x2apic: Simplify cluster management")
Reported-by: Rick Warner <rick@microway.com>
Bisected-by: Rick Warner <rick@microway.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Rick Warner <rick@microway.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1805171418210.1947@nanos.tec.linutronix.de
2018-05-17 21:00:12 +02:00
David S. Miller
d13d170cba Merge branch 'ibmvnic-Fix-bugs-and-memory-leaks'
Thomas Falcon says:

====================
ibmvnic: Fix bugs and memory leaks

This is a small patch series fixing up some bugs and memory leaks
in the ibmvnic driver. The first fix frees up previously allocated
memory that should be freed in case of an error. The second fixes
a reset case that was failing due to TX/RX queue IRQ's being
erroneously disabled without being enabled again. The final patch
fixes incorrect reallocated of statistics buffers during a device
reset, resulting in loss of statistics information and a memory leak.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-17 14:57:20 -04:00
Thomas Falcon
0718421389 ibmvnic: Fix statistics buffers memory leak
Move initialization of statistics buffers from ibmvnic_init function
into ibmvnic_probe. In the current state, ibmvnic_init will be called
again during a device reset, resulting in the allocation of new
buffers without freeing the old ones.

Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-17 14:57:19 -04:00
Thomas Falcon
134bbe7f21 ibmvnic: Fix non-fatal firmware error reset
It is not necessary to disable interrupt lines here during a reset
to handle a non-fatal firmware error. Move that call within the code
block that handles the other cases that do require interrupts to be
disabled and re-enabled.

Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-17 14:57:19 -04:00
Thomas Falcon
4cf2ddf3e3 ibmvnic: Free coherent DMA memory if FW map failed
If the firmware map fails for whatever reason, remember to free
up the memory after.

Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-17 14:57:19 -04:00
David Ahern
5a847a6e14 net/ipv4: Initialize proto and ports in flow struct
Updating the FIB tracepoint for the recent change to allow rules using
the protocol and ports exposed a few places where the entries in the flow
struct are not initialized.

For __fib_validate_source add the call to fib4_rules_early_flow_dissect
since it is invoked for the input path. For netfilter, add the memset on
the flow struct to avoid future problems like this. In ip_route_input_slow
need to set the fields if the skb dissection does not happen.

Fixes: bfff486265 ("net: fib_rules: support for match on ip_proto, sport and dport")
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-17 14:55:21 -04:00
Matt Mullins
8ab6ffba14 tls: don't use stack memory in a scatterlist
scatterlist code expects virt_to_page() to work, which fails with
CONFIG_VMAP_STACK=y.

Fixes: c46234ebb4 ("tls: RX path for ktls")
Signed-off-by: Matt Mullins <mmullins@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-17 14:49:38 -04:00
Arnaldo Carvalho de Melo
6e1690c4c0 tools include compiler-gcc: Add __pure attribute helper
Adopt it from the kernel sources, will be used soon.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-oubheiqj8edo5rzewt11cbn0@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-05-17 15:17:21 -03:00
Takashi Iwai
11d42c8103 ALSA: emu10k1: Rate-limit error messages about page errors
The error messages at sanity checks of memory pages tend to repeat too
many times once when it hits, and without the rate limit, it may flood
and become unreadable.  Replace such messages with the *_ratelimited()
variant.

Bugzilla: http://bugzilla.opensuse.org/show_bug.cgi?id=1093027
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-05-17 20:02:23 +02:00
Arnaldo Carvalho de Melo
789e465058 tools lib api fs tracing_path: Make tracing_events_path private
Not anymore accessed outside this library, keep it private.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-wg1m07flfrg1rm06jjzie8si@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-05-17 14:51:23 -03:00
Arnaldo Carvalho de Melo
7014e0e3bf tools lib api fs tracing_path: Introduce opendir() method
That takes care of using the right call to get the tracing_path
directory, the one that will end up calling tracing_path_set() to figure
out where tracefs is mounted.

One more step in doing just lazy reading of system structures to reduce
the number of operations done unconditionaly at 'perf' start.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-42zzi0f274909bg9mxzl81bu@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-05-17 14:50:38 -03:00
Arnaldo Carvalho de Melo
25a7d91427 perf parse-events: Use get/put_events_file()
Instead of accessing the trace_events_path variable directly, that may
not have been properly initialized wrt detecting where tracefs is
mounted.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-id7hzn1ydgkxbumeve5wapqz@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-05-17 14:49:36 -03:00
Arnaldo Carvalho de Melo
c02cab228e perf tools: Reuse the path to the tracepoint /events/ directory
When using for_each_event() we needlessly rebuild the whole path to
the tracepoint directory, reuse the dir_path instead, saving some cycles
and reducing the size of the next patch.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-54bcs15n0cp6gwcgpc4hptyc@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-05-17 14:25:07 -03:00
Linus Torvalds
58ddfe6c3a * ARM/ARM64 locking fixes
* x86 fixes: PCID, UMIP, locking
 * Improved support for recent Windows version that have a 2048 Hz
 APIC timer.
 * Rename KVM_HINTS_DEDICATED CPUID bit to KVM_HINTS_REALTIME
 * Better behaved selftests.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQEcBAABAgAGBQJa/bkTAAoJEL/70l94x66Dzf8IAJ1GqtXi0CNbq8MvU4QIqw0L
 HLIRoe/QgkTeTUa2fwirEuu5I+/wUyPvy5sAIsn/F5eiZM7nciLm+fYzw6F2uPIm
 lSCqKpVwmh8dPl1SBaqPnTcB1HPVwcCgc2SF9Ph7yZCUwFUtoeUuPj8v6Qy6y21g
 jfobHFZa3MrFgi7kPxOXSrC1qxuNJL9yLB5mwCvCK/K7jj2nrGJkLLDuzgReCqvz
 isOdpof3hz8whXDQG5cTtybBgE9veym4YqJY8R5ANXBKqbFlhaNF1T3xXrdPMISZ
 7bsGgkhYEOqeQsPrFwzAIiFxe2DogFwkn1BcvJ1B+duXrayt5CBnDPRB6Yxg00M=
 =H0d0
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull kvm fixes from Paolo Bonzini:

 - ARM/ARM64 locking fixes

 - x86 fixes: PCID, UMIP, locking

 - improved support for recent Windows version that have a 2048 Hz APIC
   timer

 - rename KVM_HINTS_DEDICATED CPUID bit to KVM_HINTS_REALTIME

 - better behaved selftests

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  kvm: rename KVM_HINTS_DEDICATED to KVM_HINTS_REALTIME
  KVM: arm/arm64: VGIC/ITS save/restore: protect kvm_read_guest() calls
  KVM: arm/arm64: VGIC/ITS: protect kvm_read_guest() calls with SRCU lock
  KVM: arm/arm64: VGIC/ITS: Promote irq_lock() in update_affinity
  KVM: arm/arm64: Properly protect VGIC locks from IRQs
  KVM: X86: Lower the default timer frequency limit to 200us
  KVM: vmx: update sec exec controls for UMIP iff emulating UMIP
  kvm: x86: Suppress CR3_PCID_INVD bit only when PCIDs are enabled
  KVM: selftests: exit with 0 status code when tests cannot be run
  KVM: hyperv: idr_find needs RCU protection
  x86: Delay skip of emulated hypercall instruction
  KVM: Extend MAX_IRQ_ROUTES to 4096 for all archs
2018-05-17 10:23:36 -07:00
Paolo Bonzini
e20ac8b11b KVM: s390: Fix vsie handling for transactional diagnostic block
vsie (nested KVM) might reject a valid input. Fix it.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJa/VnoAAoJEBF7vIC1phx8N+oP/jIiCdMaAoQtYj2KJvdO9LdJ
 cp5jxlZwhuVSkqnJ6rMRHT8cz+2EM3Ra98p7z+KjScD+XrLuNq3PzyhvjauiEJEl
 /ts0M/YhtY9OUrW40gCpUYQ4GKNHh+c4WX97DiOC1C64JoHUmQwh/qcKkCVXNh7k
 IUCnoQhNxXNlARIpL+h55TGKc8wefvYpdcBJLiUmiyDQ7H7f9jZmG/NMzh+/kWfy
 4i3zmzEmkqKqnSa5Fj+83Z7JqiWMcWJzJuBmaHFsSooHiXO7qKqM+vCWnqupsuTI
 6ucD6p4uThAqRKwVjiCzAjJslvtXB8UMrU+WA4dJKIY3/tFz9u7XTixPsVNe5L7H
 d9JaZ8szptD225oMcXaWrL1xEYcs+sKKFeBKxnNQZycp/b3mN8nQ2A0VM5rZIQ8u
 YTGjYzf2FbS5puBWFIodcJUvvACm9esoTxN6Ro2XQroPxfhpmOHxbAd/O9kPjbLf
 RG4T0b36QYrlBoPFg8pYIK0hG3z0aEAVQfrPKLi9NFblG47ysF9nhHU+RA9cdeD0
 W0gpf/AjJ2D2pcB/1oTSAoBKm1Vlk5lLiABuOmW9+PETM8IDshOnY2P9HXMCgUt+
 EmBd2rEK0u9OGfq6kO1GsiPsAya1LDqgmGScPFc3TPZBRmIL5jqBpDyF1feSfeDW
 EmTh00tTEWvDHIC1hok+
 =4Got
 -----END PGP SIGNATURE-----

Merge tag 'kvm-s390-master-4.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into kvm-master

KVM: s390: Fix vsie handling for transactional diagnostic block

vsie (nested KVM) might reject a valid input. Fix it.
2018-05-17 19:22:59 +02:00
Dave Martin
159fd7b8d3 arm64/sve: Write ZCR_EL1 on context switch only if changed
Writes to ZCR_EL1 are self-synchronising, and so may be expensive
in typical implementations.

This patch adopts the approach used for costly system register
writes elsewhere in the kernel: the system register write is
suppressed if it would not change the stored value.

Since the common case will be that of switching between tasks that
use the same vector length as one another, prediction hit rates on
the conditional branch should be reasonably good, with lower
expected amortised cost than the unconditional execution of a
heavyweight self-synchronising instruction.

Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-05-17 18:19:53 +01:00
Linus Torvalds
7c9a0fc79f sound fixes for 4.17-rc6
We have a core fix in the compat code for covering a potential race
 (double references), but it's a very minor change.
 The rest are all small device-specific quirks, as well as a correction
 of the new UAC3 support code.
 -----BEGIN PGP SIGNATURE-----
 
 iQJCBAABCAAsFiEEIXTw5fNLNI7mMiVaLtJE4w1nLE8FAlr8J4oOHHRpd2FpQHN1
 c2UuZGUACgkQLtJE4w1nLE/u9BAAonj61ZwTiKYQS6Zgv/yXnhGeaqMgnu1AG/pf
 c3MI9mjR1E+WZy8CehCgNuvd9b6rc5PwrNgmTP58nu/DMZB1DeQkWJgv2fNm3y1c
 byuBHG+xH2AdH+mpjIWcMU857T75oaDaj3Gu36ORacCDGOHsdL0OyynT0y/C0LUd
 SwEegucAFc9Ft2vb4WfRprm9RiohT7WEyU/G+nACderaIDE12B4/CtC3l64QPWxN
 uJydQ4io92qkCMOCXBupGmwUvCCkwB+acTSLRUgKd/IEbp8cTrnOgNpgJmB6TLXY
 fj1UO6pi+fp9yXdyWwrDCqsvlrXbmDu25Sqy1CVEA/iApC5mFwFaEvLl5eEhldSV
 +o2r6O7N3IOGsMjlAov7lp1wqUgqSaeOWRjFAeNxs5lc+G4Cts27x9XMvpKPNUON
 pCAs9C+hdpcIS/ZAdpdO0JVashK6rVIP0oaUBRkTT4kKz5E6TUXbhJ1tUPpzJT0j
 98jYQOJmBhQfAfTuN54rpciv5NUA1b/KpV17BothpL6Npe0WYjS037fcwfj8u1DH
 T+2NjqZLYUkhzwzU3sDokRJcjCm/Wq2qv2aON/6CQR9LCdIJFKoWc5i7a5/v3Rm5
 xXUQgCEPzJ9kzqQguZjn/fQnnMxgK++sYiJP+TKPNxyYn4LlJ+UQBk0/dazLKQtd
 dEN+zzo=
 =lBzh
 -----END PGP SIGNATURE-----

Merge tag 'sound-4.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
 "We have a core fix in the compat code for covering a potential race
  (double references), but it's a very minor change.

  The rest are all small device-specific quirks, as well as a correction
  of the new UAC3 support code"

* tag 'sound-4.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: usb-audio: Use Class Specific EP for UAC3 devices.
  ALSA: hda/realtek - Clevo P950ER ALC1220 Fixup
  ALSA: usb: mixer: volume quirk for CM102-A+/102S+
  ALSA: hda: Add Lenovo C50 All in one to the power_save blacklist
  ALSA: control: fix a redundant-copy issue
2018-05-17 10:13:44 -07:00
Michael S. Tsirkin
633711e828 kvm: rename KVM_HINTS_DEDICATED to KVM_HINTS_REALTIME
KVM_HINTS_DEDICATED seems to be somewhat confusing:

Guest doesn't really care whether it's the only task running on a host
CPU as long as it's not preempted.

And there are more reasons for Guest to be preempted than host CPU
sharing, for example, with memory overcommit it can get preempted on a
memory access, post copy migration can cause preemption, etc.

Let's call it KVM_HINTS_REALTIME which seems to better
match what guests expect.

Also, the flag most be set on all vCPUs - current guests assume this.
Note so in the documentation.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-05-17 19:12:13 +02:00
Anson Huang
0b01fd3d40
regulator: pfuze100: add .is_enable() for pfuze100_swb_regulator_ops
If is_enabled() is not defined, regulator core will assume
this regulator is already enabled, then it can NOT be really
enabled after disabled.

Based on Li Jun's patch from the NXP kernel tree.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-05-17 18:12:08 +01:00
Anson Huang
5fe156f1ca
regulator: pfuze100: add enable/disable for switch
Add enable/disable support for switch regulator on pfuze100.

Based on Robin Gong's patch from the NXP kernel tree.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-05-17 18:12:07 +01:00
Linus Torvalds
3e9245c5fa Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Martin Schwidefsky:

 - a fix for the vfio ccw translation code

 - update an incorrect email address in the MAINTAINERS file

 - fix a division by zero oops in the cpum_sf code found by trinity

 - two fixes for the error handling of the qdio code

 - several spectre related patches to convert all left-over indirect
   branches in the kernel to expoline branches

 - update defconfigs to avoid warnings due to the netfilter Kconfig
   changes

 - avoid several compiler warnings in the kexec_file code for s390

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/qdio: don't release memory in qdio_setup_irq()
  s390/qdio: fix access to uninitialized qdio_q fields
  s390/cpum_sf: ensure sample frequency of perf event attributes is non-zero
  s390: use expoline thunks in the BPF JIT
  s390: extend expoline to BC instructions
  s390: remove indirect branch from do_softirq_own_stack
  s390: move spectre sysfs attribute code
  s390/kernel: use expoline for indirect branches
  s390/ftrace: use expoline for indirect branches
  s390/lib: use expoline for indirect branches
  s390/crc32-vx: use expoline for indirect branches
  s390: move expoline assembler macros to a header
  vfio: ccw: fix cleanup if cp_prefetch fails
  s390/kexec_file: add declaration of purgatory related globals
  s390: update defconfigs
  MAINTAINERS: update s390 zcrypt maintainers email address
2018-05-17 10:11:44 -07:00
Srinivas Kandagatla
e744619d05
soc: qcom: apr: fix invalid msg_type check
Removed invalid msg_type check.
This also fixes below static checker warning:
apr.c:95:35: warning: comparison is always true due to limited range of
 data type [-Wtype-limits]
warn: always true condition '(msg_type != 69864) => (0-u16max != 69864)'

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-05-17 18:11:23 +01:00
Bard Liao
81dd1c5dcf
ASoC: rt5670: improve PLL function's stability
Set PR-38 register to 0x1fe1 will make PLL function more stable.

Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-05-17 18:10:41 +01:00
Marco Felsch
74f24d8728
ASoC: ssm2305: Add amplifier driver
The ssm2305 is a simple Class-D audio amplifier. A application can
turn on/off the device by a gpio. It's also possible to hardwire the
shutdown pin.

Tested on a i.MX6 based custom board.

Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-05-17 18:09:44 +01:00
Linus Torvalds
305bb55212 selinux/stable-4.17 PR 20180516
-----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCAAyFiEEcQCq365ubpQNLgrWVeRaWujKfIoFAlr8kO8UHHBhdWxAcGF1
 bC1tb29yZS5jb20ACgkQVeRaWujKfIrEtg/5AWIHjkXWgUnwtG+zswaZmzXRCIHi
 Ixz/R7gDLBstLDORr0mZ19sllo9iQfiFfeKQL+8ewn5CM7vGViASBDrbscsU9QDI
 imy5PLcJ4iVRcLhpgKCQWrz2kE3lIkK1UlpMTnsHR7wXeLrTKF4bSI/Rdyu6jApB
 VnyOaeTp3BUKpY5mKURVP+N8jG/MF/kCx94lNlsBnVmPkbI8A8wALyZPZt9D7YRu
 3FGRQQ9FM0HTGTplnfvDLoEH97Dk4MRTGaKpHj/kKuqviQDpf/JH6/fk1nQDgHkW
 Mzj6YbMZddee7TDbhmmyvymaYNqcjbRiOiPBEodoDMHcN9Cba7gvtGA0J4/WSLaz
 ZdVUdqG1E0P3qsda4/pf1FLDTXOtwmxk0J/fwOixnfnVIvb/mUGzJrxb2HqXQBjH
 Mycd260b4LmZg1XSkAiBvF6XLanOx3VZHTMg5rsMgM2lZ8o7mH3nWwbEhy9qIuHp
 gSq63NU/X43pB8dfGVxWvVKild2uA2wKO4Kl6hZ0DW4VdM5423qz67aYy38EIguk
 cEvTGrFBqZy5ib1XzXSYjMsmHRZQAU2SDI4g6gjSTjK+WnzaUgliFN0EyS7IIK1c
 us1gYIPa3LrQ7giUsCqyKAcp08tHSAHYw6z1vHS1tlu447EkTX6QzO99dMPtMzWd
 69zSUhOtbYamaiA=
 =SSWK
 -----END PGP SIGNATURE-----

Merge tag 'selinux-pr-20180516' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux

Pull SELinux fixes from Paul Moore:
 "A small pull request to fix a few regressions in the SELinux/SCTP code
  with applications that call bind() with AF_UNSPEC/INADDR_ANY.

  The individual commit descriptions have more information, but the
  commits themselves should be self explanatory"

* tag 'selinux-pr-20180516' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
  selinux: correctly handle sa_family cases in selinux_sctp_bind_connect()
  selinux: fix address family in bind() and connect() to match address/port
  selinux: add AF_UNSPEC and INADDR_ANY checks to selinux_socket_bind()
2018-05-17 10:02:19 -07:00
Amy Chiang
448ec638c6 md/raid5: Assigning NULL to sh->batch_head before testing bit R5_Overlap of a stripe
In add_stripe_bio(), if the stripe_head is in batch list, the incoming
bio is regarded as overlapping, and the bit R5_Overlap on this stripe_head
is set. break_stripe_batch_list() checks bit R5_Overlap on each stripe_head
first then assigns NULL to sh->batch_head.

If break_stripe_batch_list() checks bit R5_Overlap on stripe_head A
after add_stripe_bio() finds stripe_head A is in batch list and before
add_stripe_bio() sets bit R5_Overlapt of stripe_head A,
break_stripe_batch_list() would not know there's a process in
wait_for_overlap and needs to call wake_up(). There's a huge chance a
process never returns from schedule() if add_stripe_bio() is called
from raid5_make_request().

In break_stripe_batch_list(), assigning NULL to sh->batch_head should
be done before it checks bit R5_Overlap of a stripe_head.

Signed-off-by: Amy Chiang <amychiang@qnap.com>
Signed-off-by: Shaohua Li <shli@fb.com>
2018-05-17 09:56:00 -07:00
Gioh Kim
b33d10624f md/raid1: add error handling of read error from FailFast device
Current handle_read_error() function calls fix_read_error()
only if md device is RW and rdev does not include FailFast flag.
It does not handle a read error from a RW device including
FailFast flag.

I am not sure it is intended. But I found that write IO error
sets rdev faulty. The md module should handle the read IO error and
write IO error equally. So I think read IO error should set rdev faulty.

Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Reviewed-by: Jack Wang <jinpu.wang@profitbricks.com>
Signed-off-by: Shaohua Li <shli@fb.com>
2018-05-17 09:55:59 -07:00
Yufen Yu
c42a0e2675 md: fix NULL dereference of mddev->pers in remove_and_add_spares()
We met NULL pointer BUG as follow:

[  151.760358] BUG: unable to handle kernel NULL pointer dereference at 0000000000000060
[  151.761340] PGD 80000001011eb067 P4D 80000001011eb067 PUD 1011ea067 PMD 0
[  151.762039] Oops: 0000 [#1] SMP PTI
[  151.762406] Modules linked in:
[  151.762723] CPU: 2 PID: 3561 Comm: mdadm-test Kdump: loaded Not tainted 4.17.0-rc1+ #238
[  151.763542] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1.fc26 04/01/2014
[  151.764432] RIP: 0010:remove_and_add_spares.part.56+0x13c/0x3a0
[  151.765061] RSP: 0018:ffffc90001d7fcd8 EFLAGS: 00010246
[  151.765590] RAX: 0000000000000000 RBX: ffff88013601d600 RCX: 0000000000000000
[  151.766306] RDX: 0000000000000000 RSI: ffff88013601d600 RDI: ffff880136187000
[  151.767014] RBP: ffff880136187018 R08: 0000000000000003 R09: 0000000000000051
[  151.767728] R10: ffffc90001d7fed8 R11: 0000000000000000 R12: ffff88013601d600
[  151.768447] R13: ffff8801298b1300 R14: ffff880136187000 R15: 0000000000000000
[  151.769160] FS:  00007f2624276700(0000) GS:ffff88013ae80000(0000) knlGS:0000000000000000
[  151.769971] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  151.770554] CR2: 0000000000000060 CR3: 0000000111aac000 CR4: 00000000000006e0
[  151.771272] Call Trace:
[  151.771542]  md_ioctl+0x1df2/0x1e10
[  151.771906]  ? __switch_to+0x129/0x440
[  151.772295]  ? __schedule+0x244/0x850
[  151.772672]  blkdev_ioctl+0x4bd/0x970
[  151.773048]  block_ioctl+0x39/0x40
[  151.773402]  do_vfs_ioctl+0xa4/0x610
[  151.773770]  ? dput.part.23+0x87/0x100
[  151.774151]  ksys_ioctl+0x70/0x80
[  151.774493]  __x64_sys_ioctl+0x16/0x20
[  151.774877]  do_syscall_64+0x5b/0x180
[  151.775258]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

For raid6, when two disk of the array are offline, two spare disks can
be added into the array. Before spare disks recovery completing,
system reboot and mdadm thinks it is ok to restart the degraded
array by md_ioctl(). Since disks in raid6 is not only_parity(),
raid5_run() will abort, when there is no PPL feature or not setting
'start_dirty_degraded' parameter. Therefore, mddev->pers is NULL.

But, mddev->raid_disks has been set and it will not be cleared when
raid5_run abort. md_ioctl() can execute cmd 'HOT_REMOVE_DISK' to
remove a disk by mdadm, which will cause NULL pointer dereference
in remove_and_add_spares() finally.

Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Shaohua Li <shli@fb.com>
2018-05-17 09:55:59 -07:00
Mariusz Dabrowski
2cd259a77d raid5: copy write hint from origin bio to stripe
Store write hint from original bio in stripe head so it can be assigned
to bio sent to each RAID device.

Signed-off-by: Mariusz Dabrowski <mariusz.dabrowski@intel.com>
Reviewed-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Reviewed-by: Pawel Baldysiak <pawel.baldysiak@intel.com>
Signed-off-by: Shaohua Li <shli@fb.com>
2018-05-17 09:55:58 -07:00
David S. Miller
4b9c776803 Merge branch 'sched-refactor-NOLOCK-qdiscs'
Paolo Abeni says:

====================
sched: refactor NOLOCK qdiscs

With the introduction of NOLOCK qdiscs, pfifo_fast performances in the
uncontended scenario degraded measurably, especially after the commit
eb82a99447 ("net: sched, fix OOO packets with pfifo_fast").

This series restore the pfifo_fast performances in such scenario back the
previous level, mainly reducing the number of atomic operations required to
perform the qdisc_run() call. Even performances in the contended scenario
increase measurably.

Note: This series is on top of:

sched: manipulate __QDISC_STATE_RUNNING in qdisc_run_* helpers
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-17 12:46:55 -04:00
Paolo Abeni
021a17ed79 pfifo_fast: drop unneeded additional lock on dequeue
After the previous patch, for NOLOCK qdiscs, q->seqlock is
always held when the dequeue() is invoked, we can drop
any additional locking to protect such operation.

Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-17 12:46:54 -04:00
Paolo Abeni
96009c7d50 sched: replace __QDISC_STATE_RUNNING bit with a spin lock
So that we can use lockdep on it.
The newly introduced sequence lock has the same scope of busylock,
so it shares the same lockdep annotation, but it's only used for
NOLOCK qdiscs.

With this changeset we acquire such lock in the control path around
flushing operation (qdisc reset), to allow more NOLOCK qdisc perf
improvement in the next patch.

Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-17 12:46:54 -04:00
Jeremy Linton
37c3ec2d81 arm64: topology: divorce MC scheduling domain from core_siblings
Now that we have an accurate view of the physical topology
we need to represent it correctly to the scheduler. Generally MC
should equal the LLC in the system, but there are a number of
special cases that need to be dealt with.

In the case of NUMA in socket, we need to assure that the sched
domain we build for the MC layer isn't larger than the DIE above it.
Similarly for LLC's that might exist in cross socket interconnect or
directory hardware we need to assure that MC is shrunk to the socket
or NUMA node.

This patch builds a sibling mask for the LLC, and then picks the
smallest of LLC, socket siblings, or NUMA node siblings, which
gives us the behavior described above. This is ever so slightly
different than the similar alternative where we look for a cache
layer less than or equal to the socket/NUMA siblings.

The logic to pick the MC layer affects all arm64 machines, but
only changes the behavior for DT/MPIDR systems if the NUMA domain
is smaller than the core siblings (generally set to the cluster).
Potentially this fixes a possible bug in DT systems, but really
it only affects ACPI systems where the core siblings is correctly
set to the socket siblings. Thus all currently available ACPI
systems should have MC equal to LLC, including the NUMA in socket
machines where the LLC is partitioned between the NUMA nodes.

Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Vijaya Kumar K <vkilari@codeaurora.org>
Tested-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Tested-by: Tomasz Nowicki <Tomasz.Nowicki@cavium.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Morten Rasmussen <morten.rasmussen@arm.com>
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-05-17 17:28:09 +01:00
Jeremy Linton
bce1a65172 ACPI: Add PPTT to injectable table list
Add ACPI_SIG_PPTT to the table so initrd's can override the
system topology.

Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Vijaya Kumar K <vkilari@codeaurora.org>
Tested-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Tested-by: Tomasz Nowicki <Tomasz.Nowicki@cavium.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Geoffrey Blake <geoffrey.blake@arm.com>
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-05-17 17:28:09 +01:00
Jeremy Linton
2f0a5d107e arm64: topology: enable ACPI/PPTT based CPU topology
Propagate the topology information from the PPTT tree to the
cpu_topology array. We can get the thread id and core_id by assuming
certain levels of the PPTT tree correspond to those concepts.
The package_id is flagged in the tree and can be found by calling
find_acpi_cpu_topology_package() which terminates
its search when it finds an ACPI node flagged as the physical
package. If the tree doesn't contain enough levels to represent
all of the requested levels then the root node will be returned
for all subsequent levels.

Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Vijaya Kumar K <vkilari@codeaurora.org>
Tested-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Tested-by: Tomasz Nowicki <Tomasz.Nowicki@cavium.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Morten Rasmussen <morten.rasmussen@arm.com>
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-05-17 17:28:09 +01:00
Jeremy Linton
868abc0768 arm64: topology: rename cluster_id
The cluster concept isn't architecturally defined for arm64.
Lets match the name of the arm64 topology field to the kernel macro
that uses it.

Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Vijaya Kumar K <vkilari@codeaurora.org>
Tested-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Tested-by: Tomasz Nowicki <Tomasz.Nowicki@cavium.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Morten Rasmussen <morten.rasmussen@arm.com>
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-05-17 17:28:09 +01:00