Commit graph

766,468 commits

Author SHA1 Message Date
Rahul Lakkireddy
8e725f7caa cxgb4: update LE-TCAM collection for T6
For T6, clip table is separated from main TCAM. So, update LE-TCAM
collection logic to collect clip table TCAM as well. IPv6 takes
4 entries in clip table TCAM compared to 2 entries in main TCAM.

Also, in case of errors, keep LE-TCAM collected so far and set the
status to partial dump.

Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-16 15:01:30 -04:00
Josef Bacik
76aa1d3412 nbd: call nbd_bdev_reset instead of bd_set_size on disconnect
We need to make sure we don't just set the size of the bdev to 0 while
it's being used by a file system.  We have the appropriate check in
nbd_bdev_reset, simply use that helper instead.

Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-16 12:54:13 -06:00
Josef Bacik
fe1f9e6659 nbd: fix how we set bd_invalidated
bd_invalidated is kind of a pain wrt partitions as it really only
triggers the partition rescan if it is set after bd_ops->open() runs, so
setting it when we reset the device isn't useful.  We also sporadically
would still have partitions left over in some disconnect cases, so fix
this by always setting bd_invalidated on open if there's no
configuration or if we've had a disconnect action happen, that way the
partition table gets invalidated and rescanned properly.

Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-16 12:54:12 -06:00
Josef Bacik
96d97e1782 nbd: clear_sock on netlink disconnect
This is what the ioctl based nbd disconnect does as well.  Without this
the device will just sit there and wait for the connection to go away
(or IO to occur) before the device gets torn down.  Instead clear
everything up on our end so the configuration goes away as quickly as
possible.

Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-16 12:54:10 -06:00
Josef Bacik
9e2b19675d nbd: use bd_set_size when updating disk size
When we stopped relying on the bdev everywhere I broke updating the
block device size on the fly, which ceph relies on.  We can't just do
set_capacity, we also have to do bd_set_size so things like parted will
notice the device size change.

Fixes: 29eaadc ("nbd: stop using the bdev everywhere")
cc: stable@vger.kernel.org
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-16 12:54:09 -06:00
Josef Bacik
c3f7c93976 nbd: update size when connected
I messed up changing the size of an NBD device while it was connected by
not actually updating the device or doing the uevent.  Fix this by
updating everything if we're connected and we change the size.

cc: stable@vger.kernel.org
Fixes: 639812a ("nbd: don't set the device size until we're connected")
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-16 12:54:07 -06:00
Josef Bacik
8364da4751 nbd: fix nbd device deletion
This fixes a use after free bug, we shouldn't be doing disk->queue right
after we do del_gendisk(disk).  Save the queue and do the cleanup after
the del_gendisk.

Fixes: c6a4759ea0 ("nbd: add device refcounting")
cc: stable@vger.kernel.org
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-16 12:54:06 -06:00
Jason Wang
7063efd33b tuntap: fix use after free during release
After commit b196d88aba ("tun: fix use after free for ptr_ring") we
need clean up tx ring during release(). But unfortunately, it tries to
do the cleanup blindly after socket were destroyed which will lead
another use-after-free. Fix this by doing the cleanup before dropping
the last reference of the socket in __tun_detach().

Reported-by: Andrei Vagin <avagin@virtuozzo.com>
Acked-by: Andrei Vagin <avagin@virtuozzo.com>
Fixes: b196d88aba ("tun: fix use after free for ptr_ring")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-16 14:53:10 -04:00
David S. Miller
fee8fb952d Merge branch 'qed-LL2-fixes'
Michal Kalderon says:

====================
qed: LL2 fixes

This series fixes some issues in ll2 related to synchronization
and resource freeing
====================

Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-16 14:52:30 -04:00
Michal Kalderon
490068deae qed: Fix LL2 race during connection terminate
Stress on qedi/qedr load unload lead to list_del corruption.
This is due to ll2 connection terminate freeing resources without
verifying that no more ll2 processing will occur.

This patch unregisters the ll2 status block before terminating
the connection to assure this race does not occur.

Fixes: 1d6cff4fca ("qed: Add iSCSI out of order packet handling")
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-16 14:52:23 -04:00
Michal Kalderon
ffd2c0d127 qed: Fix possibility of list corruption during rmmod flows
The ll2 flows of flushing the txq/rxq need to be synchronized with the
regular fp processing. Caused list corruption during load/unload stress
tests.

Fixes: 0a7fb11c23 ("qed: Add Light L2 support")
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-16 14:52:23 -04:00
Michal Kalderon
f9bcd60274 qed: LL2 flush isles when connection is closed
Driver should free all pending isles once it gets a FLUSH cqe from FW.
Part of iSCSI out of order flow.

Fixes: 1d6cff4fca ("qed: Add iSCSI out of order packet handling")
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-16 14:52:23 -04:00
David S. Miller
7e360d9d31 Merge branch 'qed-LL2-fixes'
Michal Kalderon says:

====================
qed: LL2 fixes

This series fixes some issues in ll2 related to synchronization
and resource freeing
====================

Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
2018-05-16 14:49:01 -04:00
Michal Kalderon
fc16f56b7b qed: Fix LL2 race during connection terminate
Stress on qedi/qedr load unload lead to list_del corruption.
This is due to ll2 connection terminate freeing resources without
verifying that no more ll2 processing will occur.

This patch unregisters the ll2 status block before terminating
the connection to assure this race does not occur.

Fixes: 1d6cff4fca ("qed: Add iSCSI out of order packet handling")
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-16 14:49:01 -04:00
Michal Kalderon
6291c608a9 qed: Fix possibility of list corruption during rmmod flows
The ll2 flows of flushing the txq/rxq need to be synchronized with the
regular fp processing. Caused list corruption during load/unload stress
tests.

Fixes: 0a7fb11c23 ("qed: Add Light L2 support")
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-16 14:49:01 -04:00
Michal Kalderon
974f6c046a qed: LL2 flush isles when connection is closed
Driver should free all pending isles once it gets a FLUSH cqe from FW.
Part of iSCSI out of order flow.

Fixes: 1d6cff4fca ("qed: Add iSCSI out of order packet handling")
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-16 14:49:00 -04:00
YueHaibing
76e597eb15 net: ethoc: Remove useless test before clk_disable_unprepare
clk_disable_unprepare() already checks that the clock pointer is valid.
No need to test it before calling it.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-16 14:44:29 -04:00
YueHaibing
93120eba48 net: stmmac: Remove useless test before clk_disable_unprepare
clk_disable_unprepare() already checks that the clock pointer is valid.
No need to test it before calling it.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-16 14:43:54 -04:00
Davide Caratti
5a4931ae01 net/sched: fix refcnt leak in the error path of tcf_vlan_init()
Similarly to what was done with commit a52956dfc5 ("net sched actions:
fix refcnt leak in skbmod"), fix the error path of tcf_vlan_init() to avoid
refcnt leaks when wrong value of TCA_VLAN_PUSH_VLAN_PROTOCOL is given.

Fixes: 5026c9b1ba ("net sched: vlan action fix late binding")
CC: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-16 14:41:44 -04:00
Josef Bacik
3de9beeeb4 block: fix MAINTAINERS email for nbd
I've been missing stuff because it's been going into my work email which
is a black hole.  Update to the email I actually use so I stop missing
patches and bug reports.

Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-16 12:40:06 -06:00
Geert Uytterhoeven
e49ac9679e net: 8390: ne: Fix accidentally removed RBTX4927 support
The configuration settings for RBTX4927 were accidentally removed,
leading to a silently broken network interface.

Re-add the missing settings to fix this.

Fixes: 8eb97ff5a4 ("net: 8390: remove m32r specific bits")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-16 14:38:54 -04:00
Hemanth Puranik
9e6881d366 net: qcom/emac: Encapsulate sgmii ops under one structure
This patch introduces ops structure for sgmii, This by ensures that
we do not need dummy functions in case of emulation platforms.

Signed-off-by: Hemanth Puranik <hpuranik@codeaurora.org>
Acked-by: Timur Tabi <timur@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-16 14:33:27 -04:00
David S. Miller
cfb3e08968 Merge branch 'rmnet-next'
Subash Abhinov Kasiviswanathan says:

====================
net: qualcomm: rmnet: Updates 2018-05-14

Patch 1 adds tx_drops counter to more places.
Patch 2 adds ethtool private stats support to make it easy to debug
the checksum offload path.
Patch 3 is a cleanup in command packet processing path.

v1->v2: Fix the incorrect if / else statement in
rmnet_map_checksum_downlink_packet() and define rmnet_ethtool_ops
as static as mentioned by kbuild test robot.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-16 14:23:05 -04:00
Subash Abhinov Kasiviswanathan
721ce0f644 net: qualcomm: rmnet: Remove redundant command check
The command packet size is already checked once in
rmnet_map_deaggregate() for the header, packet and trailer size, so
this additional check is not needed.

Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-16 14:23:04 -04:00
Subash Abhinov Kasiviswanathan
bbde32d38b net: qualcomm: rmnet: Add support for ethtool private stats
Add ethtool private stats handler to debug the handling of packets
with checksum offload header / trailer. This allows to keep track of
the number of packets for which hardware computes the checksum and
counts and reasons where checksum computation was skipped in hardware
and was done in the network stack.

Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-16 14:23:04 -04:00
Subash Abhinov Kasiviswanathan
1eece799d3 net: qualcomm: rmnet: Capture all drops in transmit path
Packets in transmit path could potentially be dropped if there were
errors while adding the MAP header or the checksum header.
Increment the tx_drops stats in these cases.

Additionally, refactor the code to free the packet and increment
the tx_drops stat under a single label.

Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-16 14:23:04 -04:00
David S. Miller
b0ec758510 Merge branch 'of-mdio-Fall-back-to-mdiobus_register-with-NULL-device_node'
Florian Fainelli says:

====================
of: mdio: Fall back to mdiobus_register() with NULL device_node

This patch series updates of_mdiobus_register() such that when the device_node
argument is NULL, it calls mdiobus_register() directly. This is consistent with
the behavior of of_mdiobus_register() when CONFIG_OF=n.

I only converted the most obvious drivers, there are others that have a much
less obvious behavior and specifically attempt to deal with CONFIG_ACPI.

Changes in v2:

- fixed build error in davincin_mdio.c (Grygorii)
- reworked first patch a bit: commit message, subject and removed useless
  code comment
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-16 14:20:36 -04:00
Florian Fainelli
00e798c7d1 drivers: net: Remove device_node checks with of_mdiobus_register()
A number of drivers have the following pattern:

if (np)
	of_mdiobus_register()
else
	mdiobus_register()

which the implementation of of_mdiobus_register() now takes care of.
Remove that pattern in drivers that strictly adhere to it.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Fugang Duan <fugang.duan@nxp.com>
Reviewed-by: Antoine Tenart <antoine.tenart@bootlin.com>
Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-16 14:20:36 -04:00
Florian Fainelli
6d07a68a59 of: mdio: Fall back to mdiobus_register() with NULL device_node
When the device_node specified is NULL, fall back to mdiobus_register().
We have a number of drivers having a similar pattern which is:

if (np)
	of_mdiobus_register()
else
	mdiobus_register()

so incorporate that behavior within the core of_mdiobus_register()
function. This is also consistent with the stub version that we defined
when CONFIG_OF=n.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-16 14:20:35 -04:00
Omar Sandoval
ec601924df iomap: provide more useful errors for invalid swap files
Currently, for an invalid swap file, we print the same error message
regardless of the reason. This isn't very useful for an admin, who will
likely want to know why exactly they can't use their swap file. So,
let's add specific error messages for each reason, and also move the
bdev check after the flags checks, since the latter are more
fundamental.

Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-05-16 11:13:34 -07:00
Grygorii Strashko
c6213eb1ae net: ethernet: ti: cpsw-phy-sel: check bus_find_device() ret value
This fixes klockworks warnings: Pointer 'dev' returned from call to
function 'bus_find_device' at line 179 may be NULL and will be dereferenced
at line 181.

    cpsw-phy-sel.c:179: 'dev' is assigned the return value from function 'bus_find_device'.
    bus.c:342: 'bus_find_device' explicitly returns a NULL value.
    cpsw-phy-sel.c:181: 'dev' is dereferenced by passing argument 1 to function 'dev_get_drvdata'.
    device.h:1024: 'dev' is passed to function 'dev_get_drvdata'.
    device.h:1026: 'dev' is explicitly dereferenced.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
[nsekhar@ti.com: add an error message, fix return path]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-16 14:13:13 -04:00
David S. Miller
ac22bfb15c Merge branch 'dsa-bcm_sf2-CFP-fixes'
Florian Fainelli says:

====================
net: dsa: bcm_sf2: CFP fixes

This patch series fixes a number of usability issues with the SF2 Compact Field
Processor code:

- we would not be properly bound checking the location when we let the kernel
  automatically place rules with RX_CLS_LOC_ANY

- when using IPv6 rules and user space specifies a location identifier we
  would be off by one in what the chain ID (within the Broadcom tag) indicates

- it would be possible to delete one of the two slices of an IPv6 while leaving
  the other one programming leading to various problems
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-16 14:11:23 -04:00
Florian Fainelli
1942adf642 net: dsa: bcm_sf2: Fix IPv6 rule half deletion
It was possible to delete only one half of an IPv6, which would leave
the second half still programmed and possibly in use. Instead of
checking for the unused bitmap, we need to check the unique bitmap, and
refuse any deletion that does not match that criteria. We also need to
move that check from bcm_sf2_cfp_rule_del_one() into its caller:
bcm_sf2_cfp_rule_del() otherwise we would not be able to delete second
halves anymore that would not pass the first test.

Fixes: ba0696c22e ("net: dsa: bcm_sf2: Add support for IPv6 CFP rules")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-16 14:11:22 -04:00
Florian Fainelli
6c05561c54 net: dsa: bcm_sf2: Fix IPv6 rules and chain ID
We had several issues that would make the programming of IPv6 rules both
inconsistent and error prone:

- the chain ID that we would be asking the hardware to put in the
  packet's Broadcom tag would be off by one, it would return one of the
  two indexes, but not the one user-space specified

- when an user specified a particular location to insert a CFP rule at,
  we would not be returning the same index, which would be confusing if
  nothing else

- finally, like IPv4, it would be possible to overflow the last entry by
  re-programming it

Fix this by swapping the usage of rule_index[0] and rule_index[1] where
relevant in order to return a consistent and correct user-space
experience.

Fixes: ba0696c22e ("net: dsa: bcm_sf2: Add support for IPv6 CFP rules")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-16 14:11:22 -04:00
Florian Fainelli
43a5e00f38 net: dsa: bcm_sf2: Fix RX_CLS_LOC_ANY overwrite for last rule
When we let the kernel pick up a rule location with RX_CLS_LOC_ANY, we
would be able to overwrite the last rules because of a number of issues.

The IPv4 code path would not be checking that rule_index is within
bounds, and it would also only be allowed to pick up rules from range
0..126 instead of the full 0..127 range. This would lead us to allow
overwriting the last rule when we let the kernel pick-up the location.

Fixes: 3306145866 ("net: dsa: bcm_sf2: Move IPv4 CFP processing to specific functions")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-16 14:11:22 -04:00
Antoine Tenart
3eb0a48af4 arm64: defconfig: enable the Armada thermal driver
This patch enables the Armada thermal driver to support thermal
management on Marvell EBU Armada SoCs (7K,8K).

Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2018-05-16 20:08:31 +02:00
Takashi Iwai
377a879d98 ALSA: usb-audio: Apply rate limit to warning messages in URB complete callback
retire_capture_urb() may print warning messages when the given URB
doesn't align, and this may flood the system log easily.
Put the rate limit to the message for avoiding it.

Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1093485
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-05-16 20:07:18 +02:00
Debabrata Banerjee
b3c898e20b Revert "bonding: allow carrier and link status to determine link state"
This reverts commit 1386c36b30.

We don't want to encourage drivers to not report carrier status
correctly, therefore remove this commit.

Signed-off-by: Debabrata Banerjee <dbanerje@akamai.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-16 14:03:50 -04:00
Roman Mashak
55df3e9754 tc-testing: updated mirred and vlan with more tests
Added extra test cases for different control actions (reclassify, pipe
etc.), cookies, max values & exceeding maximum, and replace existing
actions unit tests.

Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-16 14:03:15 -04:00
Linus Torvalds
9d38cd06c3 The memory barrier usage in updating the random ptr hash for %p in
vsprintf is incorrect. Instead of adding the read memory barrier
 into vsprintf() which will cause a slight degradation to a commonly
 used function in the kernel just to solve a very unlikely race
 condition that can only happen at boot up, change the code from
 using a variable branch to a static_branch. Not only does this solve
 the race condition, it actually will improve the performance of
 vsprintf() by removing the conditional branch that is only needed
 at boot.
 -----BEGIN PGP SIGNATURE-----
 
 iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCWvwtURQccm9zdGVkdEBn
 b29kbWlzLm9yZwAKCRAp5XQQmuv6ql1NAP4g19xnu23+fPADOLWj8CShIGroIPvC
 vNkg8UMNW6qWyAEA32aPJyRAC/hqqEgYbBBUHFNVyqdwZ38os7gnqzfBRwQ=
 =Vw/o
 -----END PGP SIGNATURE-----

Merge tag 'trace-v4.17-rc5-vsprintf' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull memory barrier for from Steven Rostedt:
 "The memory barrier usage in updating the random ptr hash for %p in
  vsprintf is incorrect.

  Instead of adding the read memory barrier into vsprintf() which will
  cause a slight degradation to a commonly used function in the kernel
  just to solve a very unlikely race condition that can only happen at
  boot up, change the code from using a variable branch to a
  static_branch.

  Not only does this solve the race condition, it actually will improve
  the performance of vsprintf() by removing the conditional branch that
  is only needed at boot"

* tag 'trace-v4.17-rc5-vsprintf' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  vsprintf: Replace memory barrier with static_key for random_ptr_key update
2018-05-16 11:02:54 -07:00
Roman Mashak
2f42a12832 tc-testing: fixed copy-pasting error in police tests
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-16 13:27:32 -04:00
Shuah Khan (Samsung OSG)
c171654caa usbip: usbip_host: fix bad unlock balance during stub_probe()
stub_probe() calls put_busid_priv() in an error path when device isn't
found in the busid_table. Fix it by making put_busid_priv() safe to be
called with null struct bus_id_priv pointer.

This problem happens when "usbip bind" is run without loading usbip_host
driver and then running modprobe. The first failed bind attempt unbinds
the device from the original driver and when usbip_host is modprobed,
stub_probe() runs and doesn't find the device in its busid table and calls
put_busid_priv(0 with null bus_id_priv pointer.

usbip-host 3-10.2: 3-10.2 is not in match_busid table...  skip!

[  367.359679] =====================================
[  367.359681] WARNING: bad unlock balance detected!
[  367.359683] 4.17.0-rc4+ #5 Not tainted
[  367.359685] -------------------------------------
[  367.359688] modprobe/2768 is trying to release lock (
[  367.359689]
==================================================================
[  367.359696] BUG: KASAN: null-ptr-deref in print_unlock_imbalance_bug+0x99/0x110
[  367.359699] Read of size 8 at addr 0000000000000058 by task modprobe/2768

[  367.359705] CPU: 4 PID: 2768 Comm: modprobe Not tainted 4.17.0-rc4+ #5

Fixes: 22076557b0 ("usbip: usbip_host: fix NULL-ptr deref and use-after-free errors") in usb-linus
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-16 18:52:13 +02:00
Paolo Abeni
32f7b44d0f sched: manipulate __QDISC_STATE_RUNNING in qdisc_run_* helpers
Currently NOLOCK qdiscs pay a measurable overhead to atomically
manipulate the __QDISC_STATE_RUNNING. Such bit is flipped twice per
packet in the uncontended scenario with packet rate below the
line rate: on packed dequeue and on the next, failing dequeue attempt.

This changeset moves the bit manipulation into the qdisc_run_{begin,end}
helpers, so that the bit is now flipped only once per packet, with
measurable performance improvement in the uncontended scenario.

This also allows simplifying the qdisc teardown code path - since
qdisc_is_running() is now effective for each qdisc type - and avoid a
possible race between qdisc_run() and dev_deactivate_many(), as now
the some_qdisc_is_busy() can properly detect NOLOCK qdiscs being busy
dequeuing packets.

Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-16 12:26:25 -04:00
Markus Niebel
e1b505a603 net: phy: micrel: add 125MHz reference clock workaround
The micrel KSZ9031 phy has a optional clock pin (CLK125_NDO) which can be
used as reference clock for the MAC unit. The clock signal must meet the
RGMII requirements to ensure the correct data transmission between the
MAC and the PHY. The KSZ9031 phy does not fulfill the duty cycle
requirement if the phy is configured as slave. For a complete
describtion look at the errata sheets: DS80000691D or DS80000692D.

The errata sheet recommends to force the phy into master mode whenever
there is a 1000Base-T link-up as work around. Only set the
"micrel,force-master" property if you use the phy reference clock provided
by CLK125_NDO pin as MAC reference clock in your application.

Attenation, this workaround is only usable if the link partner can
be configured to slave mode for 1000Base-T.

Signed-off-by: Markus Niebel <Markus.Niebel@tqs.de>
[m.felsch@pengutronix.de: fix dt-binding documentation]
[m.felsch@pengutronix.de: use already existing result var for read/write]
[m.felsch@pengutronix.de: add error handling]
[m.felsch@pengutronix.de: add more comments]
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-16 12:20:03 -04:00
Eric Dumazet
7f582b248d tcp: purge write queue in tcp_connect_init()
syzkaller found a reliable way to crash the host, hitting a BUG()
in __tcp_retransmit_skb()

Malicous MSG_FASTOPEN is the root cause. We need to purge write queue
in tcp_connect_init() at the point we init snd_una/write_seq.

This patch also replaces the BUG() by a less intrusive WARN_ON_ONCE()

kernel BUG at net/ipv4/tcp_output.c:2837!
invalid opcode: 0000 [#1] SMP KASAN
Dumping ftrace buffer:
   (ftrace buffer empty)
Modules linked in:
CPU: 0 PID: 5276 Comm: syz-executor0 Not tainted 4.17.0-rc3+ #51
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:__tcp_retransmit_skb+0x2992/0x2eb0 net/ipv4/tcp_output.c:2837
RSP: 0000:ffff8801dae06ff8 EFLAGS: 00010206
RAX: ffff8801b9fe61c0 RBX: 00000000ffc18a16 RCX: ffffffff864e1a49
RDX: 0000000000000100 RSI: ffffffff864e2e12 RDI: 0000000000000005
RBP: ffff8801dae073a0 R08: ffff8801b9fe61c0 R09: ffffed0039c40dd2
R10: ffffed0039c40dd2 R11: ffff8801ce206e93 R12: 00000000421eeaad
R13: ffff8801ce206d4e R14: ffff8801ce206cc0 R15: ffff8801cd4f4a80
FS:  0000000000000000(0000) GS:ffff8801dae00000(0063) knlGS:00000000096bc900
CS:  0010 DS: 002b ES: 002b CR0: 0000000080050033
CR2: 0000000020000000 CR3: 00000001c47b6000 CR4: 00000000001406f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <IRQ>
 tcp_retransmit_skb+0x2e/0x250 net/ipv4/tcp_output.c:2923
 tcp_retransmit_timer+0xc50/0x3060 net/ipv4/tcp_timer.c:488
 tcp_write_timer_handler+0x339/0x960 net/ipv4/tcp_timer.c:573
 tcp_write_timer+0x111/0x1d0 net/ipv4/tcp_timer.c:593
 call_timer_fn+0x230/0x940 kernel/time/timer.c:1326
 expire_timers kernel/time/timer.c:1363 [inline]
 __run_timers+0x79e/0xc50 kernel/time/timer.c:1666
 run_timer_softirq+0x4c/0x70 kernel/time/timer.c:1692
 __do_softirq+0x2e0/0xaf5 kernel/softirq.c:285
 invoke_softirq kernel/softirq.c:365 [inline]
 irq_exit+0x1d1/0x200 kernel/softirq.c:405
 exiting_irq arch/x86/include/asm/apic.h:525 [inline]
 smp_apic_timer_interrupt+0x17e/0x710 arch/x86/kernel/apic/apic.c:1052
 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:863

Fixes: cf60af03ca ("net-tcp: Fast Open client - sendmsg(MSG_FASTOPEN)")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-16 12:18:00 -04:00
Saeed Mahameed
e3ca348806 net/mlx5: Fix build break when CONFIG_SMP=n
Avoid using the kernel's irq_descriptor and return IRQ vector affinity
directly from the driver.

This fixes the following build break when CONFIG_SMP=n

include/linux/mlx5/driver.h: In function ‘mlx5_get_vector_affinity_hint’:
include/linux/mlx5/driver.h:1299:13: error:
        ‘struct irq_desc’ has no member named ‘affinity_hint’

Fixes: 6082d9c9c9 ("net/mlx5: Fix mlx5_get_vector_affinity function")
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
CC: Randy Dunlap <rdunlap@infradead.org>
CC: Guenter Roeck <linux@roeck-us.net>
CC: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Israel Rukshin <israelr@mellanox.com>
Reported-by: kbuild test robot <lkp@intel.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-16 12:16:45 -04:00
David S. Miller
5a63f77af7 Merge branch 'bonding-performance-and-reliability'
Debabrata Banerjee says:

====================
bonding: performance and reliability

Series of fixes to how rlb updates are handled, code cleanup, allowing
higher performance tx hashing in balance-alb mode, and reliability of
link up/down monitoring.

v2: refactor bond_is_nondyn_tlb with inline fn, update log comment to
point out that multicast addresses will not get rlb updates.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-16 12:15:12 -04:00
Debabrata Banerjee
1386c36b30 bonding: allow carrier and link status to determine link state
In a mixed environment it may be difficult to tell if your hardware
support carrier, if it does not it can always report true. With a new
use_carrier option of 2, we can check both carrier and link status
sequentially, instead of one or the other

Signed-off-by: Debabrata Banerjee <dbanerje@akamai.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-16 12:15:11 -04:00
Debabrata Banerjee
e79c105574 bonding: allow use of tx hashing in balance-alb
The rx load balancing provided by balance-alb is not mutually
exclusive with using hashing for tx selection, and should provide a decent
speed increase because this eliminates spinlocks and cache contention.

Signed-off-by: Debabrata Banerjee <dbanerje@akamai.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-16 12:15:11 -04:00
Debabrata Banerjee
cbeeea70de bonding: use common mac addr checks
Replace homegrown mac addr checks with faster defs from etherdevice.h

Note that this will also prevent any rlb arp updates for multicast
addresses, however this should have been forbidden anyway.

Signed-off-by: Debabrata Banerjee <dbanerje@akamai.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-16 12:15:11 -04:00