Commit graph

766,468 commits

Author SHA1 Message Date
Harry Wentland
f287765680 drm/amd/display: Disallow enabling CRTC without primary plane with FB
The below commit

    "drm/atomic: Try to preserve the crtc enabled state in drm_atomic_remove_fb, v2"

introduces a slight behavioral change to rmfb. Instead of disabling a crtc
when the primary plane is disabled, it now preserves it.

Since DC is currently not equipped to handle this we need to fail such
a commit, otherwise we might see a corrupted screen.

This is based on Shirish's previous approach but avoids adding all
planes to the new atomic state which leads to a full update in DC for
any commit, and is not what we intend.

Theoretically DM should be able to deal with states with fully populated planes,
even for simple updates, such as cursor updates. This should still be
addressed in the future.

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-04-25 10:07:49 -05:00
Mikita Lipski
ad64dc0137 drm/amd/display: Fix deadlock when flushing irq
Lock irq table when reading a work in queue,
unlock to flush the work, lock again till all tasks
are cleared

Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2018-04-25 10:07:29 -05:00
Chris Wilson
f6f109155f drm/i915: Remove obsolete min/max freq setters from debugfs
A more complete, and more importantly stable, interface for controlling
the RPS frequency range is available in sysfs, obsoleting the unstable
debugfs.

It's presence seems to trick people into using it, forgetting it is not
ABI.

References: https://bugs.freedesktop.org/show_bug.cgi?id=106237
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180425142334.27113-1-chris@chris-wilson.co.uk
2018-04-25 16:06:01 +01:00
Takashi Iwai
4d31c6e41e Merge branch 'for-linus' into for-next
Back-merge 4.17-rc3 fixes for further development.
This will bump the base to 4.17-rc2, too.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-04-25 16:44:36 +02:00
Takashi Iwai
8a7d6003df ALSA: hda - Skip jack and others for non-existing PCM streams
When CONFIG_SND_DYNAMIC_MINORS isn't set, there are only limited
number of devices available, and HD-audio, especially with HDMI/DP
codec, will fail to create more than two devices.

The driver warns about the lack of such devices and skips the PCM
device creations, but the HDMI driver still tries to create the
corresponding JACK, SPDIF and ELD controls even for the non-existing
PCM substreams.  This results in confusion on user-space, and even may
break the operation.

Similarly, Intel HDMI/DP codec builds the ELD notification from i915
graphics driver, and this may be broken if a notification is sent for
the non-existing PCM stream.

This patch adds the check of the existence of the assigned PCM
substream in the both scenarios above, and skips the further operation
if the PCM substream is not assigned.

Fixes: 9152085def ("ALSA: hda - add DP MST audio support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-04-25 16:37:19 +02:00
Gianluca Borello
1612a981b7 bpf, x64: fix JIT emission for dead code
Commit 2a5418a13f ("bpf: improve dead code sanitizing") replaced dead
code with a series of ja-1 instructions, for safety. That made JIT
compilation much more complex for some BPF programs. One instance of such
programs is, for example:

bool flag = false
...
/* A bunch of other code */
...
if (flag)
        do_something()

In some cases llvm is not able to remove at compile time the code for
do_something(), so the generated BPF program ends up with a large amount
of dead instructions. In one specific real life example, there are two
series of ~500 and ~1000 dead instructions in the program. When the
verifier replaces them with a series of ja-1 instructions, it causes an
interesting behavior at JIT time.

During the first pass, since all the instructions are estimated at 64
bytes, the ja-1 instructions end up being translated as 5 bytes JMP
instructions (0xE9), since the jump offsets become increasingly large (>
127) as each instruction gets discovered to be 5 bytes instead of the
estimated 64.

Starting from the second pass, the first N instructions of the ja-1
sequence get translated into 2 bytes JMPs (0xEB) because the jump offsets
become <= 127 this time. In particular, N is defined as roughly 127 / (5
- 2) ~= 42. So, each further pass will make the subsequent N JMP
instructions shrink from 5 to 2 bytes, making the image shrink every time.
This means that in order to have the entire program converge, there need
to be, in the real example above, at least ~1000 / 42 ~= 24 passes just
for translating the dead code. If we add this number to the passes needed
to translate the other non dead code, it brings such program to 40+
passes, and JIT doesn't complete. Ultimately the userspace loader fails
because such BPF program was supposed to be part of a prog array owner
being JITed.

While it is certainly possible to try to refactor such programs to help
the compiler remove dead code, the behavior is not really intuitive and it
puts further burden on the BPF developer who is not expecting such
behavior. To make things worse, such programs are working just fine in all
the kernel releases prior to the ja-1 fix.

A possible approach to mitigate this behavior consists into noticing that
for ja-1 instructions we don't really need to rely on the estimated size
of the previous and current instructions, we know that a -1 BPF jump
offset can be safely translated into a 0xEB instruction with a jump offset
of -2.

Such fix brings the BPF program in the previous example to complete again
in ~9 passes.

Fixes: 2a5418a13f ("bpf: improve dead code sanitizing")
Signed-off-by: Gianluca Borello <g.borello@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-04-25 16:29:32 +02:00
Peter Xu
9a0fd67530 tracing: Fix missing tab for hwlat_detector print format
It's been missing for a while but no one is touching that up.  Fix it.

Link: http://lkml.kernel.org/r/20180315060639.9578-1-peterx@redhat.com

CC: Ingo Molnar <mingo@kernel.org>
Cc:stable@vger.kernel.org
Fixes: 7b2c862501 ("tracing: Add NMI tracing in hwlat detector")
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-04-25 10:28:46 -04:00
Masami Hiramatsu
25aa50e0ca selftests: ftrace: Add a testcase for multiple actions on trigger
Add a testcase for multiple actions with different
parameters on an event trigger, which has been fixed
by commit 192c283e93bd ("tracing: Add action comparisons
 when testing matching hist triggers").

Link: http://lkml.kernel.org/r/152292055227.15769.6327959816123227152.stgit@devbox

Reviewed-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Tested-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-04-25 10:28:36 -04:00
Masami Hiramatsu
ef39a01203 selftests: ftrace: Fix trigger extended error testcase
Previous testcase redirects echo-out into /dev/null
using "&>" as below

echo "trigger-command" >> trigger &> /dev/null

But this means redirecting both stdout and stderr into
/dev/null because it is same as below

echo "trigger-command" >> trigger > /dev/null 2>&1

So ">> trigger" redirects stdout to trigger file, but
next "> /dev/null" redirects stdout to /dev/null again
and the last "2>/&1" redirects stderr to stdout (/dev/null)

This fixes it by "2> /dev/null". And also, since it
must fail, add "!" to echo command.

Link: http://lkml.kernel.org/r/152292052250.15769.12565292689264162435.stgit@devbox

Fixes: f06eec4d0f ("selftests: ftrace: Add inter-event hist triggers testcases")
Reviewed-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Tested-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-04-25 10:28:01 -04:00
Thomas Richter
bcbd385b61 kprobes: Fix random address output of blacklist file
File /sys/kernel/debug/kprobes/blacklist displays random addresses:

[root@s8360046 linux]# cat /sys/kernel/debug/kprobes/blacklist
0x0000000047149a90-0x00000000bfcb099a	print_type_x8
....

This breaks 'perf probe' which uses the blacklist file to prohibit
probes on certain functions by checking the address range.

Fix this by printing the correct (unhashed) address.

The file mode is read all but this is not an issue as the file
hierarchy points out:
 # ls -ld /sys/ /sys/kernel/ /sys/kernel/debug/ /sys/kernel/debug/kprobes/
	/sys/kernel/debug/kprobes/blacklist
dr-xr-xr-x 12 root root 0 Apr 19 07:56 /sys/
drwxr-xr-x  8 root root 0 Apr 19 07:56 /sys/kernel/
drwx------ 16 root root 0 Apr 19 06:56 /sys/kernel/debug/
drwxr-xr-x  2 root root 0 Apr 19 06:56 /sys/kernel/debug/kprobes/
-r--r--r--  1 root root 0 Apr 19 06:56 /sys/kernel/debug/kprobes/blacklist

Everything in and below /sys/kernel/debug is rwx to root only,
no group or others have access.

Background:
Directory /sys/kernel/debug/kprobes is created by debugfs_create_dir()
which sets the mode bits to rwxr-xr-x. Maybe change that to use the
parent's directory mode bits instead?

Link: http://lkml.kernel.org/r/20180419105556.86664-1-tmricht@linux.ibm.com

Fixes: ad67b74d24 ("printk: hash addresses printed with %p")
Cc: stable@vger.kernel.org
Cc: <stable@vger.kernel.org> # v4.15+
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: David S Miller <davem@davemloft.net>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: acme@kernel.org

Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-04-25 10:27:56 -04:00
Ravi Bangoria
ba16293dad tracing: Fix kernel crash while using empty filter with perf
Kernel is crashing when user tries to record 'ftrace:function' event
with empty filter:

  # perf record -e ftrace:function --filter="" ls

  # dmesg
  BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
  Oops: 0000 [#1] SMP PTI
  ...
  RIP: 0010:ftrace_profile_set_filter+0x14b/0x2d0
  RSP: 0018:ffffa4a7c0da7d20 EFLAGS: 00010246
  RAX: ffffa4a7c0da7d64 RBX: 0000000000000000 RCX: 0000000000000006
  RDX: 0000000000000000 RSI: 0000000000000092 RDI: ffff8c48ffc968f0
  ...
  Call Trace:
   _perf_ioctl+0x54a/0x6b0
   ? rcu_all_qs+0x5/0x30
  ...

After patch:
  # perf record -e ftrace:function --filter="" ls
  failed to set filter "" on event ftrace:function with 22 (Invalid argument)

Also, if user tries to echo "" > filter, it used to throw an error.
This behavior got changed by commit 80765597bc ("tracing: Rewrite
filter logic to be simpler and faster"). This patch restores the
behavior as a side effect:

Before patch:
  # echo "" > filter
  #

After patch:
  # echo "" > filter
  bash: echo: write error: Invalid argument
  #

Link: http://lkml.kernel.org/r/20180420150758.19787-1-ravi.bangoria@linux.ibm.com

Fixes: 80765597bc ("tracing: Rewrite filter logic to be simpler and faster")
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-04-25 10:27:55 -04:00
Steven Rostedt (VMware)
1c758a2202 tracing/x86: Update syscall trace events to handle new prefixed syscall func names
Arnaldo noticed that the latest kernel is missing the syscall event system
directory in x86. I bisected it down to d5a00528b5 ("syscalls/core,
syscalls/x86: Rename struct pt_regs-based sys_*() to __x64_sys_*()").

The system call trace events are special, as there is only one trace event
for all system calls (the raw_syscalls). But a macro that wraps the system
calls creates meta data for them that copies the name to find the system
call that maps to the system call table (the number). At boot up, it does a
kallsyms lookup of the system call table to find the function that maps to
the meta data of the system call. If it does not find a function, then that
system call is ignored.

Because the x86 system calls had "__x64_", or "__ia32_" prefixed to the
"sys" for the names, they do not match the default compare algorithm. As
this was a problem for power pc, the algorithm can be overwritten by the
architecture. The solution is to have x86 have its own algorithm to do the
compare and this brings back the system call trace events.

Link: http://lkml.kernel.org/r/20180417174128.0f3457f0@gandalf.local.home

Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Dominik Brodowski <linux@dominikbrodowski.net>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Fixes: d5a00528b5 ("syscalls/core, syscalls/x86: Rename struct pt_regs-based sys_*() to __x64_sys_*()")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-04-25 10:27:55 -04:00
Chris Wilson
1f177a131b drm/i915: Use memset64() to align the ring with MI_NOOP
When filling the ring to align the emit pointer to the next cacheline,
use memset64() rather than open-coding it. As we know that we always
have an even number of dwords, we can replace the dword loop with the
qword equivalent.

v2: s/0/MI_NOOP<<32 | MI_NOOP/

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180425123718.16366-1-chris@chris-wilson.co.uk
2018-04-25 15:27:38 +01:00
Linus Walleij
fe644072df block: mq: Add some minor doc for core structs
As it came up in discussion on the mailing list that the semantic
meaning of 'blk_mq_ctx' and 'blk_mq_hw_ctx' isn't completely
obvious to everyone, let's add some minimal kerneldoc for a
starter.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-04-25 07:58:18 -06:00
Jens Axboe
e9938f552f bcache: mark Coly Li as bcache maintainer
Since Michael had to step back, Coly has agreed to be the new
maintainer. Mark him as such.

Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-04-25 07:58:18 -06:00
Michael Lyle
d88b6d0444 MAINTAINERS: Remove me as maintainer of bcache
Too much to do with other projects.  I've enjoyed working with everyone
here, and hope to occasionally contribute on bcache.

Signed-off-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-04-25 07:58:18 -06:00
Luc Van Oostenryck
2bbdd81567 staging: vboxvideo: fix mode_valid's return type
The method struct drm_connector_helper_funcs::mode_valid is defined
as returning an 'enum drm_mode_status' but the driver implementation
for this method uses an 'int' for it.

Fix this by using 'enum drm_mode_status' in the driver too.

Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-25 15:58:04 +02:00
Simon Sandström
5de3b09027 staging: pi433: break long lines in pi433_if.c
Breaks long lines in pi433_if.c, fixing checkpatch.pl warnings:
"WARNING: line over 80 characters"

Signed-off-by: Simon Sandström <simon@nikanor.nu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-25 15:58:04 +02:00
Luc Van Oostenryck
e71e17d3b6 staging: gdm724x: fix gdm_lte_tx()'s return type
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t',
which is a typedef for an enum type, but the implementation in this
driver returns an 'int'.

Fix this by returning 'netdev_tx_t' in this driver too.

Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-25 15:58:04 +02:00
Luc Van Oostenryck
955ad17103 staging: rtl8723bs: fix rtw_cfg80211_monitor_if_xmit_entry()'s return type
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t',
which is a typedef for an enum type, but the implementation in this
driver returns an 'int'.

Fix this by returning 'netdev_tx_t' in this driver too.

Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-25 15:58:04 +02:00
Luc Van Oostenryck
f42e2d6880 staging: visornic: fix visornic_xmit()'s return type
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t',
which is a typedef for an enum type, but the implementation in this
driver returns an 'int'.

Fix this by returning 'netdev_tx_t' in this driver too.

Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-25 15:58:04 +02:00
Luc Van Oostenryck
cae9bc7d7c staging: wlan-ng: fix p80211knetdev_hard_start_xmit()'s return type
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t',
which is a typedef for an enum type, but the implementation in this
driver returns an 'int'.

Fix this by returning 'netdev_tx_t' in this driver too.

Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-25 15:58:04 +02:00
Luc Van Oostenryck
ad8918077d staging/wilc1000: fix wilc_mac_xmit()'s return type
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t',
which is a typedef for an enum type, but the implementation in this
driver returns an 'int'.

Fix this by returning 'netdev_tx_t' in this driver too.

Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-25 15:55:49 +02:00
Ajay Singh
30ad32cd62 staging: wilc1000: updated TODO list
Removed the items from WILC1000 TODO list, which are already addressed
to keep it updated. The removed items are already taken care by
previously submitted patches.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-25 15:55:10 +02:00
Ajay Singh
f48a6c0622 staging: wilc1000: remove registering of ndo_do_ioctl callback
Remove registering of ndo_do_ioctl in wilc_netdev_ops structure.
As RSSI information is already avaliable through cfg80211, so remove
the IOCTL call use to fetch the same information. Wext support is not
present in the driver. Its also done to address the TODO list item
mentioned below:

"use wext-core handling instead of private SIOCSIWPRIV implementation"

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-25 15:55:10 +02:00
Ajay Singh
ac39f0beca staging: wilc1000: rename pu32InactiveTime to avoid camelCase issue
Avoid camelCase issues found by checkpatch.pl script.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-25 15:54:17 +02:00
Ajay Singh
a448f658b8 staging: wilc1000: remove the use of goto label in wilc_spi_clear_int_ext()
Remove goto label '_fail_' used in wilc_spi_clear_int_ext(), to avoid
the label name starting with '_'.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-25 15:54:16 +02:00
Ajay Singh
8eb658f109 staging: wilc1000: rename goto labels starting with '_' in wilc1000_wlan_init()
Rename goto labels starting with '_' in wilc1000_wlan_init() to follow
linux coding style.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-25 15:54:16 +02:00
Ajay Singh
5fe678b18e staging: wilc1000: rename goto label '_fail_' linux naming convension
Rename '_fail_' goto label to have name as per linux coding style.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-25 15:54:16 +02:00
Ajay Singh
4b255c6e38 staging: wilc1000: remove the use of goto label in wilc_init()
Added direct return in wilc_init() instead of goto label. Changes
are done to avoid the use of '_' in label name.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-25 15:54:16 +02:00
Ajay Singh
b2d26c8ccc staging: wilc1000: remove goto label '_done_' in handle_listen_state_expired()
Remove the use of goto label '_done_' in handle_listen_state_expired().
Changes are done to avoid the use of '_' in label name.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-25 15:54:16 +02:00
Ajay Singh
b417dcd75f staging: wilc1000: remove the use of goto label in wilc_spi_read_int()
In wilc_spi_read_int() remove the use of goto label '_fail_'. Changes
are done to avoid the use of '_' in label name.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-25 15:54:16 +02:00
Ajay Singh
a7d355f399 staging: wilc1000: remove the use of goto label in wilc_spi_read_size()
In wilc_spi_read_size() remove the use of goto label '_fail_'. Changes
are done to avoid the use of '_' in label name.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-25 15:54:16 +02:00
Ajay Singh
e0f2e9ce7e staging: wilc1000: remove the use of goto label in spi_cmd_complete()
In spi_cmd_complete() remove the use of goto label '_error_'. Changes
were done to avoid the use of '_' in label name.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-25 15:54:16 +02:00
Ajay Singh
a8e11a6a65 staging: wilc1000: remove multiple define for mac connect and disconnect
Cleanup patch to have commonly used macro in common header file to avoid
same defination in mulitple file. Removed MAC_CONNECTED &
MAC_DISCONNECTED macro from coreconfigurator.h header.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-25 15:54:15 +02:00
Ajay Singh
261521a81d staging: wilc1000: remove multiple define used for MAX_SSID_LEN
Cleanup patch to have commonly used macro in common header file to avoid
same defination in mulitple file. Removed MAX_SSID_LEN macro from
coreconfigurator.h header as its already defined in wilc_wlan_if.h.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-25 15:54:15 +02:00
Ajay Singh
f0fb6c11ac staging: wilc1000: remove unused macros in wilc module
Cleanup patch to remove the macros which are defined by not used.
Below mentioned macros are removed:
SCAN_DONE
SCAN_EVENT_DONE_ABORTED
WILC_WFI_RX_INTR
WILC_WFI_TX_INTR
WILC_WFI_TIMEOUT
WILC_WFI_DWELL_PASSIVE
WILC_WFI_DWELL_ACTIVE
MAX_SURVEY_RESULT_FRAG_SIZE
SURVEY_RESULT_LENGTH
NUM_BASIC_SWITCHES
NUM_FHSS_SWITCHES
NUM_11N_BASIC_SWITCHES
NUM_11N_HUT_SWITCHES
BA_SESSION_DEFAULT_BUFFER_SIZE
BA_SESSION_DEFAULT_TIMEOUT
BLOCK_ACK_REQ_SIZE

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-25 15:54:15 +02:00
Ajay Singh
d2b1943aaa staging: wilc1000: added identifiers name in function definations
Fix identifier names required for functions definition issues reported
by checkpatch.pl script.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-25 15:54:15 +02:00
Ajay Singh
168dbc5a69 staging: wilc1000: rename WID_LOGTerminal_Switch to avoid camelCase
Fix 'Avoid camelCase' issue found by checkpatch.pl script.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-25 15:54:15 +02:00
Ajay Singh
afa157b7b2 staging: wilc1000: fix line over 80 chars in change_station()
Fix 'line over 80 chars' issue found by checkpatch.pl script.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-25 15:54:15 +02:00
Ajay Singh
3f155eba93 staging: wilc1000: use sizeof(variable) for memory allocated to store key info
Changes to fix below checkpatch reported issues.

CHECK: Prefer kmalloc(sizeof(*priv->wilc_gtk[idx])...) over
kmalloc(sizeof(struct wilc_wfi_key)...)

CHECK: Prefer kmalloc(sizeof(*priv->wilc_ptk[idx])...) over
kmalloc(sizeof(struct wilc_wfi_key)...)

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-25 15:54:15 +02:00
Ajay Singh
35237fe4d4 staging: wilc1000: handle error condition in add_key() and remove auth_type variable
Added the code to return correct error code in add_key() and also removed
'auth_type' variable. Now passing diretly to function instead of using
the 'auth_type' variable.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-25 15:54:15 +02:00
Ajay Singh
9c3427fd45 staging: wilc1000: refactor add_key() to avoid duplicated code
Cleanup fixes by removing the duplicated code in actor add_key().

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-25 15:54:14 +02:00
Ajay Singh
d68331a2c7 staging: wilc1000: remove inner block {} and resetting of mode variable
Cleanup fixes to remove the uncessary inner block { /* */ } and setting
of 'mode' variable.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-25 15:54:14 +02:00
Ajay Singh
7cec84fdfd staging: wilc1000: split add_key() to avoid line over 80 chars
Cleanup changes to fix 'line over 80 chars' issue found by checkpatch.pl
script by spliting the function. Also make use of kzalloc() instead
kmalloc().

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-25 15:54:14 +02:00
Ajay Singh
e1f769c531 staging: wilc1000: rename variable using datatype in their name in add_key()
Cleanup changes to use variable name as per linux coding style.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-25 15:54:14 +02:00
Ajay Singh
96a3c871cd staging: wilc1000: rename WILC_WFI_wep_key & WILC_WFI_wep_key_len
Cleanup patch to use lower case for variable name as per linux coding
style.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-25 15:54:14 +02:00
Ajay Singh
e3b13cbfb2 staging: wilc1000: remove line over 80 char warning in few functions
Remove 'line over 80 characters' issues found by checkpatch.pl script
for following functions.

disconnect()
del_pmksa()
wilc_create_wiphy()
del_pmksa()

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-25 15:54:14 +02:00
Ajay Singh
8b10db6bdb staging: wilc1000: remove unused 'struct add_key_params'
Cleanup patch to remove unused struct data structure.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-25 15:54:14 +02:00
Ajay Singh
b79e5a89c2 staging: wilc1000: remove line over 80 char in cfg_connect_result()
Fix 'line over 80 characters' issues reported by checkpatch.pl script in
cfg_connect_result().

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-25 15:54:14 +02:00