Commit graph

766,468 commits

Author SHA1 Message Date
Colin Ian King
4405898da9 tty: nozomi: fix spelling mistake in macro NOZOMI_STATE_UKNOWN
Rename NOZOMI_STATE_UKNOWN to NOZOMI_STATE_UNKNOWN (add missing N)

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-23 10:57:06 +02:00
Jia-Ju Bai
13eac05b05 tty: ipwireless: Replace GFP_ATOMIC with GFP_KERNEL in ipwireless_network_create
ipwireless_network_create() is never called in atomic context.

The call chain ending up at ipwireless_network_create() is:
[1] ipwireless_network_create() <- config_ipwireless() <-
	ipwireless_attach()
ipwireless_attach() is only set as ".probe" in struct pcmcia_driver.

Despite never getting called from atomic context,
ipwireless_network_create() calls kzalloc() with GFP_ATOMIC,
which does not sleep for allocation.
GFP_ATOMIC is not necessary and can be replaced with GFP_KERNEL,
which can sleep and improve the possibility of sucessful allocation.

This is found by a static analysis tool named DCNS written by myself.
And I also manually check it.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-23 10:57:06 +02:00
Michal Simek
ece97f3a5f microblaze: Fix simpleImage format generation
simpleImage generation was broken for some time. This patch is fixing
steps how simpleImage.*.ub file is generated. Steps are objdump of
vmlinux and create .ub.
Also make sure that there is striped elf version with .strip suffix.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-23 10:53:35 +02:00
Razvan Stefanescu
593c9c7c90 staging: fsl-dpaa2/ethsw: Fix tag control information value overwrite
The tag control information (TCI) part of the VLAN header contains several
fields, including PCP (priority code point) and PVID (port VLAN id).

Current implementation uses function ethsw_port_set_tci() to set the PVID
value and mistakenly overwrites the rest of the TCI fields with 0,
including PCP which by default has a value of 7.

Fix this by adding support to retrieve TCI set in hardware. Read existing
value and only updated the PVID fields, leaving others unchanged.

Signed-off-by: Razvan Stefanescu <razvan.stefanescu@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-23 10:49:14 +02:00
Nguyen Phan Quang Minh
1494cb32bc staging: fsl-dpaa2/ethsw: Remove unused variable irq
Local variable irq is not used. Remove it.

Signed-off-by: Nguyen Phan Quang Minh<minhnpq16@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-23 10:49:14 +02:00
Lukasz Majewski
aa949fe731 ARM: dts: tpc: Device tree description of the iMX6Q TPC board
This commit adds device tree description of Kieback & Peter GmbH
iMX6Q TPC board.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-04-23 16:48:19 +08:00
Geert Uytterhoeven
3ba03cffc5 staging: emxx_udc: Change platform dependency to ARCH_RENESAS
Emma Mobile is a Renesas ARM SoC.  Since commit 9b5ba0df4e ("ARM:
shmobile: Introduce ARCH_RENESAS") is ARCH_RENESAS a more appropriate
platform dependency than the legacy ARCH_SHMOBILE, hence use the
former.

This will allow to drop ARCH_SHMOBILE on ARM in the near future.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-23 10:32:04 +02:00
Geert Uytterhoeven
17a16542b8 dt-bindings: mvebu-uart: DT fix s/interrupts-names/interrupt-names/
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-23 10:27:49 +02:00
Karthikeyan Ramasubramanian
066cd1c4e4 tty: serial: qcom_geni_serial: Use signed variable to get IRQ
The platform_get_irq can return error. Assigning the return value to an
unsigned variable and checking it for negative value will always return
false.

Use an intermediate signed variable to get IRQ information, check for any
error and then assign it to 'irq' variable inside uart_port structure.

Signed-off-by: Karthikeyan Ramasubramanian <kramasub@codeaurora.org>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-23 10:22:30 +02:00
Thomas Gleixner
7010adcdd2 x86/jailhouse: Fix incorrect SPDX identifier
GPL2.0 is not a valid SPDX identiier. Replace it with GPL-2.0.

Fixes: 4a362601ba ("x86/jailhouse: Add infrastructure for running in non-root cell")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Link: https://lkml.kernel.org/r/20180422220832.815346488@linutronix.de
2018-04-23 10:17:28 +02:00
Jeremy Kerr
5909c0bf9c serial/aspeed-vuart: Implement quick throttle mechanism
Although we populate the ->throttle and ->unthrottle UART operations,
these may not be called until the ldisc has had a chance to schedule and
check buffer space. This means that we may overflow the flip buffers
without ever hitting the ldisc's throttle threshold.

This change implements an interrupt-based throttle, where we check for
space in the flip buffers before reading characters from the UART's
FIFO. If there's no space available, we disable the RX interrupt and
schedule a timer to check for space later.

For this, we need an unlocked version of the set_throttle function to be
able to change throttle state from the irq_handler, which already holds
port->lock.

This prevents a case where we drop characters under heavy RX load.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Tested-by: Eddie James <eajames@linux.vnet.ibm.com>
Tested-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-23 10:16:50 +02:00
Jeremy Kerr
989983ea84 serial/aspeed-vuart: Implement rx throttling
The aspeed VUART runs at LPC bus frequency, rather than being restricted
to a typical UART baud rate. This means that the VUART can receive a lot
of data, which can overrun tty flip buffers, and/or cause a large amount
of interrupt traffic.

This change implements the uart_port->throttle & unthrottle callbacks,
implemented by disabling the receiver line status & received data
available IRQs.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Tested-by: Eddie James <eajames@linux.vnet.ibm.com>
Tested-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-23 10:16:50 +02:00
Jeremy Kerr
ebbaf9ab9e serial/8250: export serial8250_read_char
Currently, we export serial8250_rx_chars, which does a whole bunch of
reads from the 8250 data register, without any form of flow control
between reads.

An upcoming change to the aspeed vuart driver implements more
fine-grained flow control in the interrupt handler, requiring
character-at-a-time control over the rx path.

This change exports serial8250_read_char to allow this.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Tested-by: Eddie James <eajames@linux.vnet.ibm.com>
Tested-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-23 10:16:50 +02:00
Jeremy Kerr
c5f78b1fe4 serial: Introduce UPSTAT_SYNC_FIFO for synchronised FIFOs
This change adds a flag to indicate that a UART is has an external means
of synchronising its FIFO, without needing CTSRTS or XON/XOFF.

This allows us to use the throttle/unthrottle callbacks, without having
to claim other methods of flow control.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Tested-by: Eddie James <eajames@linux.vnet.ibm.com>
Tested-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-23 10:16:50 +02:00
Geert Uytterhoeven
d6810a82c7 serial: Remove depends on HAS_DMA in case of platform dependency
Remove dependencies on HAS_DMA where a Kconfig symbol depends on another
symbol that implies HAS_DMA, and, optionally, on "|| COMPILE_TEST".
In most cases this other symbol is an architecture or platform specific
symbol, or PCI.

Generic symbols and drivers without platform dependencies keep their
dependencies on HAS_DMA, to prevent compiling subsystems or drivers that
cannot work anyway.

This simplifies the dependencies, and allows to improve compile-testing.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-23 10:14:57 +02:00
Michal Simek
814453adea earlycon: Initialize port->uartclk based on clock-frequency property
On DT based platforms when current-speed property is present baudrate
is setup. Also port->uartclk is initialized to bogus BASE_BAUD * 16
value. Drivers like uartps/ns16550 contain logic when baudrate and
uartclk is used for baudrate calculation.

The patch is reading optional clock-frequency property to replace bogus
BASE_BAUD * 16 calculation to have proper baudrate calculation.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-23 10:14:57 +02:00
Kurt Kanzenbach
54e53b2e80 tty: serial: 8250: pass IRQ shared flag to UART ports
On some systems IRQ lines between multiple UARTs might be shared. If so, the
irqflags have to be configured accordingly. The reason is: The 8250 port startup
code performs IRQ tests *before* the IRQ handler for that particular port is
registered. This is performed in serial8250_do_startup(). This function checks
whether IRQF_SHARED is configured and only then disables the IRQ line while
testing.

This test is performed upon each open() of the UART device. Imagine two UARTs
share the same IRQ line: On is already opened and the IRQ is active. When the
second UART is opened, the IRQ line has to be disabled while performing IRQ
tests. Otherwise an IRQ might handler might be invoked, but the the IRQ itself
cannot be handled, because the corresponding handler isn't registered,
yet. That's because the 8250 code uses a chain-handler and invokes the
corresponding port's IRQ handling rountines himself.

Unfortunately this IRQF_SHARED flag isn't configured for UARTs probed via device
tree even if the IRQs are shared. This way, the actual and shared IRQ line isn't
disabled while performing tests and the kernel correctly detects a spurious
IRQ. So, adding this flag to the DT probe solves the issue.

Note: The UPF_SHARE_IRQ flag is configured unconditionally. Therefore, the
IRQF_SHARED flag can be set unconditionally as well.

Example stacktrace by performing echo 1 > /dev/ttyS2 on a non-patched system:

|irq 85: nobody cared (try booting with the "irqpoll" option)
| [...]
|handlers:
|[<ffff0000080fc628>] irq_default_primary_handler threaded [<ffff00000855fbb8>] serial8250_interrupt
|Disabling IRQ #85

Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-23 10:13:16 +02:00
Vignesh R
09d8b2bdbc serial: 8250: omap: Provide ability to enable/disable UART as wakeup source
Enable/Clear module level UART wakeup in UART_OMAP_WER register based on
return value of device_may_wakeup() in .suspend(). This allows
userspace to use sysfs to control the ability of UART to wakeup the
system from deep sleep state. Register is restored back in .startup()
call that happens as part of resume sequence.

With this patch, userspace can control UART wakeup capability via sysfs:
To enable wakeup capability:
echo enabled >  /sys/class/tty/ttyXX/device/power/wakeup
For disabling wakeup capability:
echo disabled > /sys/class/tty/ttyXX/device/power/wakeup

Note that the UART wakeup events configured in the 8250 hardware only
work for idle modes that do not cut off power for the UART. For deeper
idle states, dedicated padconf wakeirqs must be used. Or in some cases
the UART RX pin can be remuxed to GPIO input if the GPIO block stays
powered.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-23 10:12:14 +02:00
Joshua Scott
b7639b0b15 serial: 8250_dw: Limit dw8250_tx_wait_empty quirk to armada-38x devices
The previous implementation has had a detrimental effect on devices using
high bitrates (bluetooth), as the fifo being non-empty for a single check
would result in a 10 µs delay.

Limit the change to devices with the new "marvell,armada-38x-uart"
compatible string. Also update the code to allow the first 1000 retries
to not perform a delay.

The maximum duration of retries has been increased to cover a worst-case
seen on the Armada 385 SoC. "dmesg ; resize", will fill the buffer with
text to output before doing a resize. At 9600 baud this took up to 13 ms
to flush all characters and avoid some getting lost.

Signed-off-by: Joshua Scott <joshua.scott@alliedtelesis.co.nz>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-23 10:11:13 +02:00
Ulrich Hecht
63ba1e00f1 serial: sh-sci: Support for HSCIF RX sampling point adjustment
HSCIF has facilities that allow moving the RX sampling point by between
-8 and 7 sampling cycles (one sampling cycles equals 1/15 of a bit
by default) to improve the error margin in case of slightly mismatched
bit rates between sender and receiver.

This patch tries to determine if shifting the sampling point can improve
the error margin and will enable it if so.

Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-23 10:08:18 +02:00
Geert Uytterhoeven
7678f4c20f serial: sh-sci: Add support for dynamic instances
On DT platforms, the sh-sci driver requires the presence of "serialN"
aliases in DT, from which instance IDs are derived.  If a DT alias is
missing, the drivers fails to probe the corresponding serial port.

This becomes cumbersome when considering DT overlays, as currently
there is no upstream support for dynamically updating the /aliases node
in DT.  Furthermore, even in the presence of such support, hardcoded
instance IDs in independent overlays are prone to conflicts.

Hence add support for dynamic instance IDs, to be used in the absence of
a DT alias.  This makes serial ports behave similar to I2C and SPI
buses, which already support dynamic instances.

Ports in use are tracked using a simple bitmask of type unsigned long,
which is sufficient to handle all current hardware (max. 18 ports).
The maximum number of serial ports is still fixed, and configurable
through Kconfig.  Range validation is done through both Kconfig and a
compile-time check.

Due to the fixed maximum number of serial ports, dynamic and static
instances share the same ID space.  Static instances added later are
rejected when conflicting with dynamic instances registered earlier.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-23 10:08:18 +02:00
Daniel Kurtz
dd709e72cb earlycon: Use a pointer table to fix __earlycon_table stride
Commit 99492c39f3 ("earlycon: Fix __earlycon_table stride") tried to fix
__earlycon_table stride by forcing the earlycon_id struct alignment to 32
and asking the linker to 32-byte align the __earlycon_table symbol.  This
fix was based on commit 07fca0e57f ("tracing: Properly align linker
defined symbols") which tried a similar fix for the tracing subsystem.

However, this fix doesn't quite work because there is no guarantee that
gcc will place structures packed into an array format.  In fact, gcc 4.9
chooses to 64-byte align these structs by inserting additional padding
between the entries because it has no clue that they are supposed to be in
an array.  If we are unlucky, the linker will assign symbol
"__earlycon_table" to a 32-byte aligned address which does not correspond
to the 64-byte aligned contents of section "__earlycon_table".

To address this same problem, the fix to the tracing system was
subsequently re-implemented using a more robust table of pointers approach
by commits:
 3d56e331b6 ("tracing: Replace syscall_meta_data struct array with pointer array")
 6549864629 ("tracepoints: Fix section alignment using pointer array")
 e4a9ea5ee7 ("tracing: Replace trace_event struct array with pointer array")

Let's use this same "array of pointers to structs" approach for
EARLYCON_TABLE.

Fixes: 99492c39f3 ("earlycon: Fix __earlycon_table stride")
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Suggested-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Tested-by: Guenter Roeck <groeck@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-23 10:06:59 +02:00
Biju Das
ef9604b622 serial: sh-sci: Document r8a77470 bindings
RZ/G1C (R8A77470) SoC also has the R-Car gen2 compatible SCIF and HSCIF
ports, so document the SoC specific bindings.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-23 09:59:16 +02:00
Geert Uytterhoeven
34df2466b4 dt-bindings: meson-uart: DT fix s/clocks-names/clock-names/
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-23 09:55:49 +02:00
Stefan Agner
0aa821d846 serial: imx: fix cached UCR2 read on software reset
To reset the UART the SRST needs be cleared (low active). According
to the documentation the bit will remain active for 4 module clocks
until it is cleared (set to 1).

Hence the real register need to be read in case the cached register
indicates that the SRST bit is zero.

This bug lead to wrong baudrate because the baud rate register got
restored before reset completed in imx_flush_buffer.

Fixes: 3a0ab62f43 ("serial: imx: implement shadow registers for UCRx and UFCR")
Signed-off-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-23 09:53:36 +02:00
Stefan Agner
6d215f83e5 serial: imx: warn user when using unsupported configuration
When using half-duplex mode (which disables receiver during txing)
the RTS signal cannot be driven low during transmission when using
i.MX UART RTS/CTS control. This seems to be a limitation of the
i.MX UART IP: The RTS (CTS_B) signal is controlled by the receiver.
When the receiver is disabled, the signal stays in UART logic idle
state which is high...

If SER_RS485_RTS_ON_SEND is used, RTS needs to be high active during
transmission. Since this is the default state of the RTS (CTS_B)
signal when the receiver is off, half-duplex mode in this
configuration works fine.

However, a low-active RTS signal (flag SER_RS485_RTS_ON_SEND not set)
cannot be generated when the receiver is turned off.

Print an error if the user selects this unsupported configuration
(both SER_RS485_RTS_ON_SEND and SER_RS485_RX_DURING_TX unset) and
configure the closest working configuration (set the
SER_RS485_RX_DURING_TX flag).

Signed-off-by: Stefan Agner <stefan@agner.ch>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-23 09:53:36 +02:00
Dmitry Osipenko
ee30ec0cba usb: phy: Add Kconfig entry for Tegra PHY driver
Tegra's EHCI driver has a build dependency on Tegra's PHY driver and
currently Tegra's PHY driver is built only when Tegra's EHCI driver is
built. Add own Kconfig entry for the Tegra's PHY driver so that drivers
other than ehci-tegra (like ChipIdea UDC) could work with ehci-tegra
driver being disabled in kernels config by allowing user to manually
select the PHY driver.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-23 09:50:57 +02:00
Dmitry Osipenko
143470368e usb: tegra: Move utmi-pads reset from ehci-tegra to tegra-phy
UTMI pads are shared by USB controllers and reset of UTMI pads is shared
with the reset of USB1 controller. Currently reset of UTMI pads is done by
the EHCI driver and ChipIdea UDC works because EHCI driver always happen
to be probed first. Move reset controls from ehci-tegra to tegra-phy in
order to resolve the problem.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-23 09:50:57 +02:00
Dmitry Osipenko
f59cd94005 usb: phy: tegra: Cleanup error messages
Tegra's PHY driver has a mix of pr_err() and dev_err(), let's switch to
dev_err() and use common errors message formatting across the driver for
consistency.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-23 09:50:57 +02:00
Geert Uytterhoeven
d9be9ceb1f arm: shmobile: Change platform dependency to ARCH_RENESAS
Since commit 9b5ba0df4e ("ARM: shmobile: Introduce ARCH_RENESAS")
ARCH_RENESAS is a more appropriate platform dependency than the legacy
ARCH_SHMOBILE, hence use the former.

This will allow to drop ARCH_SHMOBILE on ARM in the near future.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-04-23 09:50:29 +02:00
Icenowy Zheng
95beb93d70 arm64: allwinner: h6: restore the usage of CCU slice macros
As the definition of CCU slice macros are already merged into the source
tree, restore the usage of the macros now.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-04-23 09:47:05 +02:00
Martin Blumenstingl
350f76dc06 usb: core: phy: add the SPDX-License-Identifier and include guard
This clarifies the license of the code. While here also add an include
guard to the header file.

Fixes: 07dbff0ddb ("usb: core: add a wrapper for the USB PHYs on the HCD")
Suggested-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-23 09:41:32 +02:00
Pascal Roeleven
590b0c0cfc ARM: dts: sun4i: Fix incorrect clocks for displays
Some displays on sun4i devices wouldn't properly stay on unless
'clk_ignore_unused' is used.

Change the duplicate clocks to the probably intended ones.

Cc: <stable@vger.kernel.org>
Signed-off-by: Pascal Roeleven <dev@pascalroeleven.nl>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-04-23 09:14:56 +02:00
Mika Westerberg
ae860a19f3 PCI / PM: Do not clear state_saved in pci_pm_freeze() when smart suspend is set
If a driver uses DPM_FLAG_SMART_SUSPEND and the device is already
runtime suspended when hibernate is started PCI core skips runtime
resuming the device but still clears pci_dev->state_saved. After the
hibernation image is written pci_pm_thaw_noirq() makes sure subsequent
thaw phases for the device are also skipped leaving it runtime suspended
with pci_dev->state_saved == false.

When the device is eventually runtime resumed pci_pm_runtime_resume()
restores config space by calling pci_restore_standard_config(), however
because pci_dev->state_saved == false pci_restore_state() never actually
restores the config space leaving the device in a state that is not what
the driver might expect.

For example here is what happens for intel-lpss I2C devices once the
hibernation snapshot is taken:

  intel-lpss 0000:00:15.0: power state changed by ACPI to D0
  intel-lpss 0000:00:1e.0: power state changed by ACPI to D3cold
  video LNXVIDEO:00: Restoring backlight state
  PM: hibernation exit
  i2c_designware i2c_designware.1: Unknown Synopsys component type: 0xffffffff
  i2c_designware i2c_designware.0: Unknown Synopsys component type: 0xffffffff
  i2c_designware i2c_designware.1: timeout in disabling adapter
  i2c_designware i2c_designware.0: timeout in disabling adapter

Since PCI config space is not restored the device is still in D3hot
making MMIO register reads return 0xffffffff.

Fix this by clearing pci_dev->state_saved only if we actually end up
runtime resuming the device.

Fixes: c4b65157ae (PCI / PM: Take SMART_SUSPEND driver flag into account)
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: 4.15+ <stable@vger.kernel.org> # 4.15+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-04-23 08:57:35 +02:00
Mika Westerberg
cc6a0e315a ACPI / scan: Initialize watchdog before PNP
At least on one Dell system the PNP motherboard resources device
includes resources used by WDAT table. Since PNP gets initialized before
WDAT it results following error and no watchdog:

  platform wdat_wdt: failed to claim resource 3: [io  0x046a-0x046c]
  ACPI: watchdog: Device creation failed: -16

Now, the PNP system driver is already accustomed with the situation that
it cannot reserve all those motherboard resources because drivers using
those might have reserved them already. In addition putting WDAT table
resources under motherboard resources device makes sense in general.

Fix this by initializing WDAT right before PNP. This allows WDAT to
reserve all its resources and still keeps PNP system driver happy.

Reported-by: Shubhrata.Priyadarsh@dell.com
Reported-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-04-23 08:56:38 +02:00
Fabio Estevam
ccaf509037 drm: dw-hdmi-i2s: Remove owner assignment from platform_driver
platform_driver does not need to set the owner field, as this will
be populated by the driver core.

Generated by scripts/coccinelle/api/platform_no_drv_owner.cocci.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1521137057-14773-1-git-send-email-festevam@gmail.com
2018-04-23 08:55:21 +02:00
Daniel Mack
f656891c66 ALSA: usb-audio: add more quirks for DSD interfaces
Based on a downstream patch from Harry ten Berge.

Signed-off-by: Daniel Mack <daniel@zonque.org>
Reported-and-tested-by: wenyi@tianyu-wool.com
Original-by: Harry ten Berge <htenberge@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-04-23 08:53:43 +02:00
Chen Yu
855c1c2fce ACPI / PM: Blacklist Low Power S0 Idle _DSM for ThinkPad X1 Tablet(2016)
ThinkPad X1 Tablet(2016) is reported to have issues with
the Low Power S0 Idle _DSM interface and since this machine
model generally can do ACPI S3 just fine, and user would
like to use S3 as default sleep model, add a blacklist
entry to disable that interface for ThinkPad X1 Tablet(2016).

Link: https://bugzilla.kernel.org/show_bug.cgi?id=199057
Reported-and-tested-by: Robin Lee <robinlee.sysu@gmail.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-04-23 08:53:17 +02:00
kbuild test robot
c4e4a8fb23 ALSA: cmi8328: array_find() can be static
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-04-23 08:48:54 +02:00
David Henningsson
f853dcaae2 ALSA: core: Report audio_tstamp in snd_pcm_sync_ptr
It looks like a simple mistake that this struct member
was forgotten.

Audio_tstamp isn't used much, and on some archs (such as x86) this
ioctl is not used by default, so that might be the reason why this
has slipped for so long.

Fixes: 4eeaaeaea1 ("ALSA: core: add hooks for audio timestamps")
Signed-off-by: David Henningsson <diwic@ubuntu.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Cc: <stable@vger.kernel.org> # v3.8+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-04-23 08:47:03 +02:00
Jeffery Miller
912e4c3320 ALSA: pcm: Return negative delays from SNDRV_PCM_IOCTL_DELAY.
The commit c2c86a9717 ("ALSA: pcm: Remove set_fs() in PCM core code")
changed SNDRV_PCM_IOCTL_DELAY to return an inconsistent error instead of a
negative delay.  Originally the call would succeed and return the negative
delay.  The Chromium OS Audio Server (CRAS) gets confused and hangs when
the error is returned instead of the negative delay.

Help CRAS avoid the issue by rolling back the behavior to return a
negative delay instead of an error.

Fixes: c2c86a9717 ("ALSA: pcm: Remove set_fs() in PCM core code")
Signed-off-by: Jeffery Miller <jmiller@neverware.com>
Cc: <stable@vger.kernel.org> # v4.13+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-04-23 08:41:35 +02:00
Martin Schwidefsky
6cf09958f3 s390: correct module section names for expoline code revert
The main linker script vmlinux.lds.S for the kernel image merges
the expoline code patch tables into two section ".nospec_call_table"
and ".nospec_return_table". This is *not* done for the modules,
there the sections retain their original names as generated by gcc:
".s390_indirect_call", ".s390_return_mem" and ".s390_return_reg".

The module_finalize code has to check for the compiler generated
section names, otherwise no code patching is done. This slows down
the module code in case of "spectre_v2=off".

Cc: stable@vger.kernel.org # 4.16
Fixes: f19fbd5ed6 ("s390: introduce execute-trampolines for branches")
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-04-23 07:57:17 +02:00
Cornelia Huck
3368e547c5 vfio: ccw: process ssch with interrupts disabled
When we call ssch, an interrupt might already be pending once we
return from the START SUBCHANNEL instruction. Therefore we need to
make sure interrupts are disabled while holding the subchannel lock
until after we're done with our processing.

Cc: stable@vger.kernel.org #v4.12+
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.ibm.com>
Acked-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Acked-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-04-23 07:57:17 +02:00
Martin Schwidefsky
2317b07d05 s390: update sampling tag after task pid change
In a multi-threaded program any thread can call execve(). If this
is not done by the thread group leader, the de_thread() function
replaces the pid of the task that calls execve() with the pid of
thread group leader. If the task reaches user space again without
going over __switch_to() the sampling tag is still set to the old
pid.

Define the arch_setup_new_exec function to verify the task pid
and udpate the tag with LPP if it has changed.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-04-23 07:57:17 +02:00
André Wild
5f3ba878e7 s390/cpum_cf: rename IBM z13/z14 counter names
Change the IBM z13/z14 counter names to be in sync with all other models.

Cc: stable@vger.kernel.org # v4.12+
Fixes: 3593eb944c ("s390/cpum_cf: add hardware counter support for IBM z14")
Fixes: 3fc7acebae ("s390/cpum_cf: add IBM z13 counter event names")
Signed-off-by: André Wild <wild@linux.ibm.com>
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-04-23 07:57:17 +02:00
Stefan Haberland
5d27a2bf6e s390/dasd: fix IO error for newly defined devices
When a new CKD storage volume is defined at the storage server, Linux
may be relying on outdated information about that volume, which leads to
the following errors:

1. Command Reject Errors for minidisk on z/VM:

dasd-eckd.b3193d: 0.0.XXXX: An error occurred in the DASD device driver,
		  reason=09
dasd(eckd): I/O status report for device 0.0.XXXX:
dasd(eckd): in req: 00000000XXXXXXXX CC:00 FC:04 AC:00 SC:17 DS:02 CS:00
	    RC:0
dasd(eckd): device 0.0.2046: Failing CCW: 00000000XXXXXXXX
dasd(eckd): Sense(hex)  0- 7: 80 00 00 00 00 00 00 00
dasd(eckd): Sense(hex)  8-15: 00 00 00 00 00 00 00 00
dasd(eckd): Sense(hex) 16-23: 00 00 00 00 e1 00 0f 00
dasd(eckd): Sense(hex) 24-31: 00 00 40 e2 00 00 00 00
dasd(eckd): 24 Byte: 0 MSG 0, no MSGb to SYSOP

2. Equipment Check errors on LPAR or for dedicated devices on z/VM:

dasd(eckd): I/O status report for device 0.0.XXXX:
dasd(eckd): in req: 00000000XXXXXXXX CC:00 FC:04 AC:00 SC:17 DS:0E CS:40
	    fcxs:01 schxs:00 RC:0
dasd(eckd): device 0.0.9713: Failing TCW: 00000000XXXXXXXX
dasd(eckd): Sense(hex)  0- 7: 10 00 00 00 13 58 4d 0f
dasd(eckd): Sense(hex)  8-15: 67 00 00 00 00 00 00 04
dasd(eckd): Sense(hex) 16-23: e5 18 05 33 97 01 0f 0f
dasd(eckd): Sense(hex) 24-31: 00 00 40 e2 00 04 58 0d
dasd(eckd): 24 Byte: 0 MSG f, no MSGb to SYSOP

Fix this problem by using the up-to-date information provided during
online processing via the device specific SNEQ to detect the case of
outdated LCU data. If there is a difference, perform a re-read of that
data.

Cc: stable@vger.kernel.org
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-04-23 07:57:16 +02:00
Heiko Carstens
783c3b53b9 s390/uprobes: implement arch_uretprobe_is_alive()
Implement s390 specific arch_uretprobe_is_alive() to avoid SIGSEGVs
observed with uretprobes in combination with setjmp/longjmp.

See commit 2dea1d9c38 ("powerpc/uprobes: Implement
arch_uretprobe_is_alive()") for more details.

With this implemented all test cases referenced in the above commit
pass.

Reported-by: Ziqian SUN <zsun@redhat.com>
Cc: <stable@vger.kernel.org> # v4.3+
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-04-23 07:57:16 +02:00
Sebastian Ott
af2e460ade s390/cio: update chpid descriptor after resource accessibility event
Channel path descriptors have been seen as something stable (as
long as the chpid is configured). Recent tests have shown that the
descriptor can also be altered when the link state of a channel path
changes. Thus it is necessary to update the descriptor during
handling of resource accessibility events.

Cc: <stable@vger.kernel.org>
Signed-off-by: Sebastian Ott <sebott@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-04-23 07:57:16 +02:00
Gustavo A. R. Silva
3eda0d22ea drm/i915/gvt: Mark expected switch fall-through in handle_g2v_notification
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.

Addresses-Coverity-ID: 1466154 ("Missing break in switch")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
2018-04-23 13:09:36 +08:00
Gustavo A. R. Silva
41e7ccc19c drm/i915/gvt/scheduler: Remove unnecessary NULL checks in sr_oa_regs
The checks are misleading and not required [1].

[1] https://lkml.org/lkml/2018/3/19/1792

Addresses-Coverity-ID: 1466017
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
2018-04-23 13:09:35 +08:00