Commit graph

766,468 commits

Author SHA1 Message Date
Sara Sharon
9b137866f9 iwlwifi: mvm: save low latency causes in an enum
Currently we have a boolean variable for each cause.

This costs space, and requires to check each separately
when determining low latency.

Since we have another cause incoming, convert it to an enum.

While at it, move the retrieval of the prev value and the
assignment of the new value to be inside iwl_mvm_update_low_latency
and save the need for each caller to do it separately.

Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-03-28 22:43:40 +03:00
Emmanuel Grumbach
8f27036a0e iwlwifi: bump the max API version for 9000 and 22000 devices
We are now ready to load 38.ucode

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-03-28 22:43:39 +03:00
Haim Dreyfuss
976ea7b2c6 iwlwifi: api: Add geographic profile information to MCC_UPDATE_CMD
Some geographic profiles require specific handling.  For example ETSI
profile requires special channel access handling.  Add geographic
profile information to MCC_UPDATE response to allow it.

Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-03-28 22:43:38 +03:00
Luca Coelho
9e5053ad9d iwlwifi: add a bunch of new 9000 PCI IDs
A lot of new PCI IDs were added for the 9000 series.  Add them to the
list of supported PCI IDs.

Cc: stable@vger.kernel.org # 4.13+
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-03-28 22:43:38 +03:00
Ayala Beker
66fa2424df iwlwifi: fw api: support the new scan request FW API version
Remove fragmented_dwell_time and add num_of_fragments to support
the new API version.

Signed-off-by: Ayala Beker <ayala.beker@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-03-28 22:43:37 +03:00
Ilan Peer
d270e7b8fa iwlwifi: mvm: Allow iwl_mvm_mac_mgd_prepare_tx() when associated
The FW does not allocate quota air time for the binding of a station
MAC before iwlmvm indicates that it is associated. Currently iwlmvm
indicates that the MAC is associated only after hearing a beacon from
the AP. In case a deauthentication frame is sent before the MAC is
associated, the frame might not be sent as the corresponding binding
is not scheduled.

To handle such cases, set IEEE80211_HW_DEAUTH_NEED_MGD_TX_PREP in the
HW flags, requesting mac80211 to call the mgd_prepare_tx() callback
before transmitting a deauthentication frame if associated but no
beacon was heard from the AP.

In addition, do not warn in iwl_mvm_mac_mgd_prepare_tx() when already
associated as now the callback can be called also when associated.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-03-28 22:43:37 +03:00
Michal Wajdeczko
0a015ff973 drm/i915/guc: Trace messages from CT while in debug
During debug we may want to investigate all communication
from the Guc. Add proper tracing macros in debug config.

v2: convert remaining DRM_DEBUG into new CT_DEBUG (Michal)
v3: use dedicated Kconfig (Daniele)
v4: checkpatch

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180326194829.58836-12-michal.wajdeczko@intel.com
2018-03-28 20:38:23 +01:00
Zamir, Roee
8f691af967 iwlwifi: mvm: add support for oce
Add support for Optimized Connectivity Experience (OCE).  Get
capabilities from the fw, expose them with nl80211, and enable them in
UMAC scan if the relevant nl80211 flags are set by the userspace.

Signed-off-by: Roee Zamir <roee.zamir@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-03-28 22:36:00 +03:00
Michal Wajdeczko
b6b0166d49 drm/i915/guc: Handle default action received over CT
When running on platform with CTB based GuC communication enabled,
GuC to Host event data will be delivered as CT request message.
However, content of the data[1] of this CT message follows format
of the scratch register used in MMIO based communication, so some
code reuse is still possible.

v2:  filter disabled messages (Daniele)

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com> #1
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180327214124.70680-1-michal.wajdeczko@intel.com
2018-03-28 20:35:18 +01:00
Michal Wajdeczko
6c77a2b058 drm/i915/guc: Prepare to process incoming requests from CT
Requests are read from CT in the irq handler, but actual processing
will be done in the work thread. Processing of specific actions will
be added in the upcoming patches.

v2: don't use GEM_BUG_ON (Chris)
    don't kmalloc too large buffer (Michal)
v3: rebased
v4: don't name it 'dispatch' (Michel) and fix checkpatch
    add some documentation (Michal)

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180326194829.58836-10-michal.wajdeczko@intel.com
2018-03-28 20:35:17 +01:00
Michal Wajdeczko
9ef4c75e06 drm/i915/guc: Implement response handling in send_ct()
Instead of returning small data in response status dword,
GuC may append longer data as response message payload.
If caller provides response buffer, we will copy received
data and use number of received data dwords as new success
return value. We will WARN if response from GuC does not
match caller expectation.

v2: fix timeout and checkpatch warnings (Michal)
v3: fix checkpatch again (Michel)
    update wait function name (Michal)
    no need for spinlock_irqsave (MichalWi)
    no magic numbers (MichalWi)
    must check before use (Jani)
    add some more documentation (Michal)
v4: update documentation (Michal)

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com> #2.5
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180327121439.70096-1-michal.wajdeczko@intel.com
2018-03-28 20:35:16 +01:00
Michal Wajdeczko
24827cd0dd drm/i915/guc: Use better name for helper wait function
In next patch we will introduce another way of waiting for the response
that will use RECV buffer. To avoid misleading names, rename old wait
function to reflect the fact that it is based on descriptor update.

v2: fix comment style (Michal)
v3: use more specific name (Michel)

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180326194829.58836-8-michal.wajdeczko@intel.com
2018-03-28 20:35:15 +01:00
Michal Wajdeczko
1d40709600 drm/i915/guc: Prepare to handle messages from CT RECV buffer
GuC can respond to our commands not only by updating SEND buffer
descriptor, but can also send a response message over RECV buffer.
Guc can also send unsolicited request messages over RECV buffer.
Let's start reading those messages and make placeholders
for actual response/request handlers.

v2: misc improvements (Michal)
v3: change response detection (Michal)
    invalid status is protocol error (Michal)
v4: rebase
v5: fix checkpatch (Michel)
    don't use fields before check (Jani)
    add some documentation (Michal)

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com> # 4.5
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180326194829.58836-7-michal.wajdeczko@intel.com
2018-03-28 20:35:14 +01:00
Michal Wajdeczko
769bfbf943 drm/i915/guc: Make event handler a virtual function
On platforms with CTB based GuC communications, we will handle
GuC events in a different way. Let's make event handler a virtual
function to allow easy switch between those variants.

Credits-to: Oscar Mateo <oscar.mateo@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180326194829.58836-6-michal.wajdeczko@intel.com
2018-03-28 20:35:13 +01:00
Michal Wajdeczko
f6a70b5970 drm/i915/guc: Implement response handling in send_mmio()
We're using data encoded in the status MMIO as return value from send
function, but GuC may also write more data in remaining MMIO regs.
Let's copy content of these registers to the buffer provided by caller.

v2: new line (Michel)
v3: updated commit message

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180326194829.58836-5-michal.wajdeczko@intel.com
2018-03-28 20:35:12 +01:00
Michal Wajdeczko
e09af3a6a6 drm/i915/guc: Prepare send() function to accept bigger response
This is a preparation step for the upcoming patches.
We already can return some small data decoded from the command
status, but we will need more in the future.

v2: add explicit response buf size
v3: squash with helper patch

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180326194829.58836-4-michal.wajdeczko@intel.com
2018-03-28 20:35:11 +01:00
Michal Wajdeczko
b839a869df drm/i915/guc: Add support for data reporting in GuC responses
GuC may return additional data in the response message.
Format and meaning of this data is action specific. We will
use this non-negative data as a new success return value.
Currently used actions don't return data that way yet.

v2: fix prohibited space after '~' (Michel)
    update commit message (Daniele)
v3: rebase

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180326194829.58836-3-michal.wajdeczko@intel.com
2018-03-28 20:35:10 +01:00
Michal Wajdeczko
4d82a17484 drm/i915/guc: Add documentation for MMIO based communication
As we are going to extend our use of MMIO based communication,
try to explain its mechanics and update corresponding definitions.

v2: fix checkpatch MACRO_ARG_REUSE

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Kelvin Gardiner <kelvin.gardiner@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com> #1
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180326194829.58836-2-michal.wajdeczko@intel.com
2018-03-28 20:35:09 +01:00
Zamir, Roee
c1a7515393 iwlwifi: mvm: add adaptive dwell support
Update the scan command API with support for adaptive dwell.  Adaptive
dwell is a type of scan that dynamically changes the time it remains
on each channel listening for beacons or probe responses.

Signed-off-by: Roee Zamir <roee.zamir@intel.com>
Signed-off-by: Beni Lev <beni.lev@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-03-28 22:34:51 +03:00
Chris Wilson
c216e90686 drm/i915/execlists: Reset ring registers on rebinding contexts
Tvrtko uncovered a fun issue with recovering from a wedge device. In his
tests, he wedged the driver by injecting an unrecoverable hang whilst a
batch was spinning. As we reset the gpu in the middle of the spinner,
when resumed it would continue on from the next instruction in the ring
and write it's breadcrumb. However, on wedging we updated our
bookkeeping to indicate that the GPU had completed executing and would
restart from after the breadcrumb; so the emission of the stale
breadcrumb from before the reset came as a bit of a surprise.

A simple fix is to when rebinding the context into the GPU, we update
the ring register state in the context image to match our bookkeeping.
We already have to update the RING_START and RING_TAIL, so updating
RING_HEAD as well is trivial. This works because whenever we unbind the
context, we keep the bookkeeping in check; and on wedging we unbind all
contexts.

Testcase: igt/gem_eio
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180327210136.16750-1-chris@chris-wilson.co.uk
Tested-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2018-03-28 20:26:03 +01:00
Nikita V. Shirokov
6f5c39fa5c bpf: Add sock_ops R/W access to ipv4 tos
Sample usage for tos ...

  bpf_getsockopt(skops, SOL_IP, IP_TOS, &v, sizeof(v))

... where skops is a pointer to the ctx (struct bpf_sock_ops).

Signed-off-by: Nikita V. Shirokov <tehnerd@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-03-28 21:05:35 +02:00
Yazen Ghannam
e2efacb6a5 Revert "x86/mce/AMD: Collect error info even if valid bits are not set"
This reverts commit 4b1e84276a.

Software uses the valid bits to decide if the values can be used for
further processing or other actions. So setting the valid bits will have
software act on values that it shouldn't be acting on.

The recommendation to save all the register values does not mean that
the values are always valid.

Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: tony.luck@intel.com
Cc: Yazen Ghannam <Yazen.Ghannam@amd.com>
Cc: bp@suse.de
Cc: linux-edac@vger.kernel.org
Link: https://lkml.kernel.org/r/20180326191526.64314-1-Yazen.Ghannam@amd.com
2018-03-28 20:34:59 +02:00
Stephen Rothwell
8ecd2953d0 ipc/shm: fix up for struct file no longer being available in shm.h
Stephen Rothewell <sfr@canb.auug.org.au> wrote:

> After merging the userns tree, today's linux-next build (powerpc
> ppc64_defconfig) produced this warning:
>
> In file included from include/linux/sched.h:16:0,
>                  from arch/powerpc/lib/xor_vmx_glue.c:14:
> include/linux/shm.h:17:35: error: 'struct file' declared inside parameter list will not be visible outside of this definition or declaration [-Werror]
>  bool is_file_shm_hugepages(struct file *file);
>                                    ^~~~
>
> and many, many more (most warnings, but some errors - arch/powerpc is
> mostly built with -Werror)

I dug through this and I discovered that the error was caused by the
removal of struct shmid_kernel from shm.h when building on powerpc.
Except for observing the existence of "struct file *shm_file" in
struct shmid_kernel I have no clue why the structure move would cause
such a failure.  I suspect shm.h always needed the forward declaration
and someting had been confusing gcc into not issuing the warning. --EWB

Fixes: a2e102cd3c ("shm: Move struct shmid_kernel into ipc/shm.c")
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2018-03-28 13:29:57 -05:00
mike.travis@hpe.com
bd47a85acd x86/platform/UV: Fix critical UV MMR address error
A critical error was found testing the fixed UV4 HUB in that an MMR address
was found to be incorrect.  This causes the virtual address space for
accessing the MMIOH1 region to be allocated with the incorrect size.

Fixes: 673aa20c55 ("x86/platform/UV: Update uv_mmrs.h to prepare for UV4A fixes")
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com>
Cc: Russ Anderson <russ.anderson@hpe.com>
Cc: Andrew Banman <andrew.banman@hpe.com>
Link: https://lkml.kernel.org/r/20180328174011.041801248@stormcage.americas.sgi.com
2018-03-28 20:19:45 +02:00
Paulo Zanoni
d775a7b184 drm/i915/gen11: add support for reading the timestamp frequency
The only thing that differs here is that the crystal clock freq now
has four possible values.

This patch gets rid of the "Unknown gen, unable to compute..." message
at boot for gen11.

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180109232835.11478-18-paulo.r.zanoni@intel.com
2018-03-28 11:14:29 -07:00
Dan Williams
466d1493ea acpi, nfit: rework NVDIMM leaf method detection
Some BIOSen do not handle 0-byte transfer lengths for the _LSR and _LSW
(label storage read/write) methods. This causes Linux to fallback to the
deprecated _DSM path, or otherwise disable label support.

Introduce acpi_nvdimm_has_method() to detect whether a method is
available rather than calling the method, require _LSI and _LSR to be
paired, and require read support before enabling write support.

Cc: <stable@vger.kernel.org>
Fixes: 4b27db7e26 ("acpi, nfit: add support for the _LS...")
Suggested-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-03-28 10:44:50 -07:00
Ville Syrjälä
e85d30060e drm/tinydrm: Make fb_dirty into a lower level hook
mipi_dbi_enable_flush() wants to call the fb->dirty() hook from the
bowels of the .atomic_enable() hook. That prevents us from taking the
plane mutex in fb->dirty() unless we also plumb down the acquire
context.

Instead it seems simpler to split the fb->dirty() into a tinydrm
specific lower level hook that can be called from
mipi_dbi_enable_flush() and from a generic higher level
tinydrm_fb_dirty() helper. As we don't have a tinydrm specific
vfuncs table we'll just stick it into tinydrm_device directly
for now.

v2: Deal with the fb->dirty() in tinydrm_display_pipe_update() as well (Noralf)

Cc: "Noralf Trønnes" <noralf@tronnes.org>
Cc: David Lechner <david@lechnology.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180323153509.15287-1-ville.syrjala@linux.intel.com
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Noralf Trønnes <noralf@tronnes.org>
2018-03-28 19:19:32 +03:00
Ville Syrjälä
0c9c7fd00e drm/simple-kms-helper: Plumb plane state to the enable hook
tinydrm enable hook wants to play around with the new fb in
.atomic_enable(), thus we'll need access to the plane state.

Performed with coccinelle:
@r1@
identifier F =~ ".*enable$";
identifier P, CS;
@@
F(
	struct drm_simple_display_pipe *P
	,struct drm_crtc_state *CS
+	,struct drm_plane_state *plane_state
	)
{
...
}

@@
struct drm_simple_display_pipe *P;
expression E;
@@
{
+ struct drm_plane *plane;
...
+ plane = &P->plane;
P->funcs->enable(P
		,E
+		,plane->state
	);
...
}

@@
identifier P, CS;
@@
struct drm_simple_display_pipe_funcs {
...
        void (*enable)(struct drm_simple_display_pipe *P
	     		,struct drm_crtc_state *CS
+			,struct drm_plane_state *plane_state
		);
...
};

v2: Pimp the commit message (David)

Cc: Marek Vasut <marex@denx.de>
Cc: Eric Anholt <eric@anholt.net>
Cc: David Lechner <david@lechnology.com>
Cc: "Noralf Trønnes" <noralf@tronnes.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180322202738.25817-1-ville.syrjala@linux.intel.com
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
2018-03-28 19:19:32 +03:00
Arnd Bergmann
5717cb89ed i.MX device tree updates for 4.17, round 2:
- Add missing property '#sound-dai-cells' for sgtl5000 codec node
    in imx6ul-isiot board to fix warning seen with DTC 1.4.6.
  - Use stdout-path instead of linux,stdout-path to fix DTC warning
    reported by DTC 1.4.6.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJaqysJAAoJEFBXWFqHsHzOz24H/j3Aa6ThJAmSi4XsCSa+xZtr
 8uqedh8EX+SEVXnkyhJ10g8A6qKZQ8boKAtva/7uJnIyMBDvLwIleLPRII3t1axj
 qp+VrLvWUw2MV0MXlj1D9vgRm9t8/Io79bzZJrdymU8LdldV3N1Gf6xJUM/AF40k
 4diFJSb4XvR1+gCp8jRKhOC65j6vPNYRLToDSqiMHMeAdVTo/CM0lp/T6Ei8BkJP
 snybLF0KPt84gGBFMcmwP7bFS9r92+yxtMeac2723peIHrCrY28ho1uIAV5kX/lf
 YpFpQk33ocRCV5iprF/qHgUF45Adj6IjP7EpSNnWdbcTr1FzU9mispdGZQ1MIQk=
 =+/7s
 -----END PGP SIGNATURE-----

Merge tag 'imx-dt-4.17-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt

Pull "i.MX device tree updates for 4.17, round 2" Shawn Guo:

 - Add missing property '#sound-dai-cells' for sgtl5000 codec node
   in imx6ul-isiot board to fix warning seen with DTC 1.4.6.
 - Use stdout-path instead of linux,stdout-path to fix DTC warning
   reported by DTC 1.4.6.

* tag 'imx-dt-4.17-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: dts: imx6ul-isiot: Pass the required '#sound-dai-cells'
  ARM: dts: imx6-phytec: Use the standard 'stdout-path' property
2018-03-28 18:09:29 +02:00
Alexander Shishkin
ebc57e399b intel_th: Add ACPI glue layer
The Trace Hub devices now can be enumerated as ACPI devices, which
translates into "Host Debugger mode". There are two IDs: one for
PCH Trace Hub, and one for the uncore Trace Hub. These are expected
to stay the same across all platforms.

Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
2018-03-28 18:47:23 +03:00
Alexander Shishkin
282ffec565 intel_th: Allow forcing host mode through drvdata
Some devices can only operate in host mode, so we need means of
communicating this to the core driver on per-device basis. This
adds a flag to drvdata to signal host-only capability to the core.

Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
2018-03-28 18:47:21 +03:00
Alexander Shishkin
661b0df848 intel_th: Pick up irq number from resources
Platform devices pass their IRQs around as resources, so as a convenience
for the glue layer code, allow them pass the IRQ to the core driver in
the resources array.

Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
2018-03-28 18:47:21 +03:00
Alexander Shishkin
c2d2c7de97 intel_th: Don't touch switch routing in host mode
When the Trace Hub is operating in Host Debugger mode, it is up to the
debugger to configure master routing even for the software sources. Do
not do this in the driver in this case.

Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
2018-03-28 18:47:20 +03:00
Alexander Shishkin
9ad5770871 intel_th: Use correct method of finding hub
Since commit 8edc514b01 ("intel_th: Make SOURCE devices children of the
root device") the hub is not the parent of SOURCE devices any more, so the
new helper function should be used for that instead of always using the
parent. The intel_th_set_output() path, however, still uses the old
logic, leading to the hub driver structure being aliased with something
else, like struct pci_driver or struct acpi_driver, and an incorrect call
to an address inferred from that, potentially resulting in a crash.

Fixes: 8edc514b01 ("intel_th: Make SOURCE devices children of the root device")
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
2018-03-28 18:47:19 +03:00
Alexander Shishkin
50352fa730 intel_th: Add SPDX GPL-2.0 header to replace GPLv2 boilerplate
This adds SPDX GPL-2.0 header to the Trace Hub driver and removes the
GPLv2 boilerplate text.

Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
2018-03-28 18:47:19 +03:00
Alexander Shishkin
4f0c7c6a12 stm class: Make dummy's master/channel ranges configurable
To allow for more flexible testing of the stm class, make it possible
to specify the ranges of masters and channels that the dummy_stm devices
cover. This is done via module parameters.

Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
2018-03-28 18:47:18 +03:00
Alexander Shishkin
9ea393d8d8 stm class: Add SPDX GPL-2.0 header to replace GPLv2 boilerplate
This adds SPDX GPL-2.0 header to to stm core files and removes the
GPLv2 boilerplate text.

Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
2018-03-28 18:47:17 +03:00
Linus Torvalds
f67b15037a perf/hwbp: Simplify the perf-hwbp code, fix documentation
Annoyingly, modify_user_hw_breakpoint() unnecessarily complicates the
modification of a breakpoint - simplify it and remove the pointless
local variables.

Also update the stale Docbook while at it.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@vger.kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-28 17:41:50 +02:00
Christoph Hellwig
e89f5b3701 dma-mapping: Don't clear GFP_ZERO in dma_alloc_attrs
Revert the clearing of __GFP_ZERO in dma_alloc_attrs and move it to
dma_direct_alloc for now.  While most common architectures always zero dma
cohereny allocations (and x86 did so since day one) this is not documented
and at least arc and s390 do not zero without the explicit __GFP_ZERO
argument.

Fixes: 57bf5a8963 ("dma-mapping: clear harmful GFP_* flags in common code")
Reported-by: Evgeniy Didin <Evgeniy.Didin@synopsys.com>
Reported-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Evgeniy Didin <Evgeniy.Didin@synopsys.com>
Cc: iommu@lists.linux-foundation.org
Link: https://lkml.kernel.org/r/20180328133535.17302-2-hch@lst.de
2018-03-28 17:34:23 +02:00
Arnd Bergmann
3ac3a2f9b2 UniPhier ARM SoC DT updates for v4.17 (2nd)
- add syscon property to sound nodes
 - add more ethernet pin groups
 - add ethernet support for PXs3 SoC
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJaum/TAAoJED2LAQed4NsG6awP/AnSPRIV7tCdbB2P4m3WdIh8
 TU3FCW5kZ4XzyIys/Kp5WMVjc0iPmTaZlxXRtz2jZC6zRAibNvqJmR3ebLG8aWqe
 3Hncqr3ZyhuqjSUsAE0wQ2dKR0lgQp48PY9b3Aiy0T0R2IavGZNfGkw89FiBEvb1
 yas7T/UyrONxw9EDfNFVKdKuCKRVKTGgWEJHWKzCrpz5SChJhUGKvFFPm4kC5K9Z
 1RMRYacXB20DRxB8zO6Xgl+EPGsclRf+B5gAp+Up9ssOCzWrIpxO+BrW416nt1Ao
 BMcUDKRi499lhCHlsMWLt1mWxb8JadSJalsPcc8MsoOBq95mt09OeuRiFvNeTZHd
 pnX3la6ntnIIbVYkEEWNZsNXBxOxeEqOcYXgEybm+mru4n+EJttzZaNotBuYwyd4
 2HzcceB6w1dzM4vgxvu1EE4Nu2lgglVIf4cv1kA6SYItg17EPjI/sSJcA5vQBKsF
 2+3tZNKyQHjtgzy+QZlSZ7AlexpZwJkes1vltJJnfYJTr55kzeRd0vj0B1qIX4Ka
 4D6AoPWbHWXIrUqGRnvlBuVvzRBXnuct8i7zBhXhn0eUYdm1E3igkQOdWpoUAlPh
 xSHv9aocFn/GJpKY3JDI3UmvUeRcy5m9QviQ0Q7MIeeAit4jyD0OKE9+wJEJHzvf
 othbtLBhqWu1dniwvCes
 =5fxa
 -----END PGP SIGNATURE-----

Merge tag 'uniphier-dt-v4.17-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into next/dt

Pull "UniPhier ARM SoC DT updates for v4.17 (2nd)" from Masahiro Yamada:

- add syscon property to sound nodes
- add more ethernet pin groups
- add ethernet support for PXs3 SoC

* tag 'uniphier-dt-v4.17-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier:
  arm64: dts: uniphier: add ethernet node for PXs3
  ARM: dts: uniphier: add pinctrl groups of ethernet for second instance
  ARM: dts: uniphier: add syscon property for UniPhier sound system
  arm64: dts: uniphier: add syscon property for UniPhier sound system
2018-03-28 17:17:49 +02:00
Arnd Bergmann
fd553821a9 The rk3399 gained support its Cadence displayport controller and some
minor additions like pins for 2ch i2s0 and the cif test clocks as well
 as a default rate for ACLK_VIO that should be 400MHz according to the TRM.
 
 The rk3328 got uart dmas fixed - a non-critical fix, as nobody was using
 that so far.
 
 New boards are the rk3328-based roc-rk3328-cc, the rk3368-based Lion-SOM
 + baseborad from Theobroma Systems and a standalone variant of the Sapphire
 board, as a lot of people where using that without the Exkavator baseboard.
 
 Sapphire also saw a lot of small cleanups of things that are not part
 of the actual Sapphire board, but the baseboard instead. The rk3399-puma
 board got i2s and tsadc support and Gru got its DP node enabled.
 -----BEGIN PGP SIGNATURE-----
 
 iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAlqpTQoQHGhlaWtvQHNu
 dGVjaC5kZQAKCRDzpnnJnNEdgZ0uCACl6GsROypjpCGLtCsxlaAXdjk0EuBI3rzy
 wW2AkmeJQHvMPYIAodVUTqEJW7w2M4V0LbF1YOzebSyLMckejKy2jQGNcjQeQ//p
 QAIilflqxqYHTzx9Abv1EpX9uYVsLA46TUnInHAlo+SyDcDAx5/D37oASS+EvlKS
 AHniQE5XfH/zf/0ASRqyzKXI+rxhovinUCeVxsJmWS5+jUchUy/PTgx3OBnTahd+
 JYjEOygTfPJoVXI3LBsQhuZdGZAVoCrDETsur8tMBBHwUHDQxy2rpLwzqv72C+SR
 kdO93Xgjz1+mML3qivJPKYPlc4OabFKgP9BzMnBsALJPXykX7cQw
 =Ay+8
 -----END PGP SIGNATURE-----

Merge tag 'v4.17-rockchip-dts64-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt

Pull "Rockchip dts64 changes for 4.17" from Heiko Stübner:

The rk3399 gained support its Cadence displayport controller and some
minor additions like pins for 2ch i2s0 and the cif test clocks as well
as a default rate for ACLK_VIO that should be 400MHz according to the TRM.

The rk3328 got uart dmas fixed - a non-critical fix, as nobody was using
that so far.

New boards are the rk3328-based roc-rk3328-cc, the rk3368-based Lion-SOM
+ baseborad from Theobroma Systems and a standalone variant of the Sapphire
board, as a lot of people where using that without the Exkavator baseboard.

Sapphire also saw a lot of small cleanups of things that are not part
of the actual Sapphire board, but the baseboard instead. The rk3399-puma
board got i2s and tsadc support and Gru got its DP node enabled.

* tag 'v4.17-rockchip-dts64-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  arm64: dts: rockchip: remove keep-power-in-suspend from sdhci of rk3399-sapphire
  arm64: dts: rockchip: assign clock rate for ACLK_VIO on rk3399
  arm64: dts: rockchip: add a standalone version of the rk3399 sapphire
  arm64: dts: rockchip: move rk3399-sapphire pwr_btn to daughterboard
  arm64: dts: rockchip: move rk3399-sapphire i2s2 to daughterboard
  arm64: dts: rockchip: move rk3399-sapphire sdio to excavator baseboard
  arm64: dts: rockchip: enable I2S codec on rk3399-puma-haikou
  arm64: dts: rockchip: move i2s0 node from baseboard to SoM on rk3399-puma
  arm64: dts: rockchip: vdd_log on rk3399-sapphire is not an i2c slave
  arm64: dts: rockchip: add Haikou baseboard with RK3368-uQ7 SoM
  arm64: dts: rockchip: add RK3368-uQ7 (Lion) SoM
  dt-bindings: add RK3368-uQ7 SoM and EVK base board
  arm64: dts: rockchip: Fix RK3328 UART DMAs
  arm64: dts: rockchip: enable DP for rk3399-gru
  arm64: dts: rockchip: add cdn-dp node for rk3399.
  arm64: dts: rockchip: add i2s0-2ch-bus pins on rk3399
  arm64: dts: rockchip: enable tsadc on rk3399-puma
  arm64: dts: rockchip: add roc-rk3328-cc board
  arm64: dts: rockchip: Add cif test clocks for rk3399
2018-03-28 17:17:00 +02:00
Arnd Bergmann
3eb8d21ac6 For general soc-specific changes the rk322x socs got their correct grf
compatible set. Other than that there are some board-specific changes
 like the Rock2 getting its otg port, recovery and power keys enabled.
 
 The vyasa board gained an enabled emmc node and the phyCORE boards
 got UHS speeds in their sd card and a fixed sd-card power supply.
 
 Finally the veyron boards dropped a nonstandard and unused property.
 -----BEGIN PGP SIGNATURE-----
 
 iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAlqpSxAQHGhlaWtvQHNu
 dGVjaC5kZQAKCRDzpnnJnNEdgTe4B/48XJWZy0NzXFKHDfpgvuBzyM4BdvqHaNcz
 6ADlLxt1r0f1EajUfuxBn3WhLAB2QniQV5gYqs5yjBucOQGHJ0OscZsfZIC7+Ee1
 xEYbA+2TJh+clZp6h+b6fW92fJnyb43c7AuW8DOVH+44oodd3xEbq0wBKm0e2elV
 fFgCAabo4AhtNSdl/yVBJOVkhPnC/23kphrDQh5Ky8d/GDBZDPg4KBuAiQrvS6qv
 T90pSQqwvqgnAZEf/zNgWwmty626KvnKExw7D5dtSNk+JxtYRuMdkUZhRSw2OLaW
 uThRyn78Tzie/5XqtX11gHR2HVY+Q4d/T3m5CfSDGtcJW4oc29gg
 =NuPe
 -----END PGP SIGNATURE-----

Merge tag 'v4.17-rockchip-dts32-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt

Pull "Rockchip dts32 changes for 4.17" from Heiko Stübner:

For general soc-specific changes the rk322x socs got their correct grf
compatible set. Other than that there are some board-specific changes
like the Rock2 getting its otg port, recovery and power keys enabled.

The vyasa board gained an enabled emmc node and the phyCORE boards
got UHS speeds in their sd card and a fixed sd-card power supply.

Finally the veyron boards dropped a nonstandard and unused property.

* tag 'v4.17-rockchip-dts32-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  ARM: dts: rockchip: enable USB-OTG port on Radxa Rock2 Square
  ARM: dts: rockchip: add recovery button for Rock2 Square
  ARM: dts: rockchip: add power key for Rock2 Square
  ARM: dts: rockchip: Add eMMC node for rk3288-vyasa
  ARM: dts: rockchip: Support UHS mode for SD card on phyCORE-RK3288 RDK
  ARM: dts: rockchip: Fix supply node for card's power on phycore som
  ARM: dts: rockchip: add "rockchip,rk3228-grf" compatible for rk322x grf node
  ARM: dts: rockchip: drop veyron's nonstandard 'backlight-boot-off'
2018-03-28 17:15:43 +02:00
Arnd Bergmann
8498546056 Fix for the legacy pmu-regmap in the smp-code to have a real name
and therefore not create a dummy* entry in debugfs.
 -----BEGIN PGP SIGNATURE-----
 
 iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAlqpSf4QHGhlaWtvQHNu
 dGVjaC5kZQAKCRDzpnnJnNEdgdQuB/9jPZLTwTJULBzf18vcOuReqarA6/51CadK
 y82vlT1wIrIkZbCGijLClw2DeDI7k81V7eXm8AFC5pxMJCFoTcpSjL9wRg/8tY9M
 dJXaeTP23clZAWzo9szccat8HcHJEltokZCRVRVyO3YzMK4RaWAx1I6NS33K4W7P
 pUPpRwPUK/EsUqdiNbnGzGGByJ/zEV3LPQW30hYe/bPXBjTewSrSPF0JsFNZ+q9S
 5S8chB37EJGf3y0VOz+pe4y1HSDLxJDOkruBW5/XCqUCrLhB+NAwMX7E2DwflJhY
 N2B8Y5jSxlHo+LIYDIp/NJG6K1ksSUh+oGRehB6crNOtokyXraRv
 =1fQp
 -----END PGP SIGNATURE-----

Merge tag 'v4.17-rockchip-soc32-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/soc

Pull "Rockchip soc32 changes for 4.17" from Heiko Stübner:

Fix for the legacy pmu-regmap in the smp-code to have a real name
and therefore not create a dummy* entry in debugfs.

* tag 'v4.17-rockchip-soc32-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  ARM: rockchip: Set name of pmu regmap_config in smp code
2018-03-28 17:14:29 +02:00
Arnd Bergmann
7df3f0bb5f Rockchip soc drivers containing conversion of the power-domain driver
to use the clk-bulk APIs and two more socs to disable jtag-switching.
 On the plus-side the issue we see with that are _supposed_ to be fixed
 in hardware in upcoming socs, so maybe this can be the last of those.
 -----BEGIN PGP SIGNATURE-----
 
 iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAlqpSUsQHGhlaWtvQHNu
 dGVjaC5kZQAKCRDzpnnJnNEdgdqIB/9UCXW7eLhVese5Htkd9OlBcBnWIovWSMf7
 TWj32YCqoMrIvRAbQ1/KCA8yQIeuyapLK8IpLVTRhX5G9GVd5Vk23o8seR2QYupN
 gjwzhEjrYYG6TeRNs89dzv2Nbl6UD8Nkw6TqxyVCa/wdNwNHkxvylrlca7RICGco
 Xi00qtbGBtp98MW/VQITiCCCRH8Htcn3Rn4uQMV/CRyukhUCQTy9hJyGXQembrF5
 fdYf9PhxJ07pEa4bZ3FHmfI/w3Qf/GIdWCflWV+0+vs2yQQ4qwXqbXCg5s3VIRB8
 Bd9uBx5lgxaF2cGH5zcQcwi+BWZTZwZKxSYdQZjDqk6eO/btmRBC
 =q5s4
 -----END PGP SIGNATURE-----

Merge tag 'v4.17-rockchip-drivers-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/drivers

Pull "Rockchip driver changes for 4.17" from Heiko Stübner:

Rockchip soc drivers containing conversion of the power-domain driver
to use the clk-bulk APIs and two more socs to disable jtag-switching.
On the plus-side the issue we see with that are _supposed_ to be fixed
in hardware in upcoming socs, so maybe this can be the last of those.

* tag 'v4.17-rockchip-drivers-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  soc: rockchip: power-domain: Add a sanity check on pd->num_clks
  soc: rockchip: power-domain: use clk_bulk APIs
  soc: rockchip: disable jtag switching for RK3128 SoCs
  soc: rockchip: disable jtag switching for RK3228/RK3229 SoCs
2018-03-28 17:08:34 +02:00
Daniel Vetter
ae358dacd2 drm/udl: Get rid of dev->struct_mutex usage
It's only used to protect our page list, and only when we know we have
a full reference. This means none of these code paths can ever race
with the final unref, and hence we do not need dev->struct_mutex
serialization and can simply switch to our own locking.

For more context the only magic the locked gem_free_object provides is
that it prevents concurrent final unref (and destruction) of gem
objects while anyone is holding dev->struct_mutex. This was used by
i915 (and other drivers) to implement eviction handling with less
headaches.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180327082356.24516-3-daniel.vetter@ffwll.ch
2018-03-28 17:07:36 +02:00
Daniel Vetter
fcb1e57f79 drm/rockchip: fixup comment for gem_free_object_unlocked
Just want to clean out all grep hits. gem_free_object is deprecated.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Sandy Huang <hjc@rock-chips.com>
Cc: "Heiko Stübner" <heiko@sntech.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-rockchip@lists.infradead.org
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180327082356.24516-2-daniel.vetter@ffwll.ch
2018-03-28 17:07:36 +02:00
Daniel Vetter
606f1fc5cf staging/vboxvideo: Use gem_free_object_unlocked
vboxvideo doesn't use dev->struct_mutex and therefore has no need to use
gem_free_object.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Michael Thayer <michael.thayer@oracle.com>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180327082356.24516-1-daniel.vetter@ffwll.ch
2018-03-28 17:07:36 +02:00
Arnd Bergmann
7f95de5e4a Reset controller changes for v4.17, part 2
This tag contains reset lookup support, similar to pwm lookups, for legacy
 non-DT platforms, a few new reset controls and a Kconfig fix for uniphier
 SoCs, as well as a new driver for the STM32MP1 peripheral reset controller.
 
 The reset lookups are merged from a separate, immutable branch, that may
 also be merged into the davinci tree.
 -----BEGIN PGP SIGNATURE-----
 
 iQJLBAABCAA1FiEEBsBxhV1FaKwXuCOBUMKIHHCeYOsFAlq6UAwXHHAuemFiZWxA
 cGVuZ3V0cm9uaXguZGUACgkQUMKIHHCeYOuXDBAA0rkV2QOjJQEhpL/jWEukmrAi
 NtNeREToKjUwfkfZFrgdCRQjm5adz+qrXUuTOK6SeqRWdW3chfeNhJoAdpPH7p54
 odAiqtAz/M5dwh6iy/VJZxFba6j9dJkTa29tKs93XKL0vjN4//AEYEuKF5HG70+E
 xm6V9ZnD4qPrCYuHZvQoiOeyrnxqaKWjRXLSAqHqv6hfg8OsJ9IRaC2SR1Asx/0A
 MkaAvLTEZj65xcA1WsOwKAtgcDDsyUt5VJcA3DW6v+YKoE59DVhlVR76dI2SijoG
 gkTOn/zCxHCVi3GjSpYRsE1ywey7XofCDiwtsV35FXIoGL3RkqcSWAwtWjrHsuHT
 2PQ3QLQzqinyPU72iu+4b1lMKzT8aJh6w03ENxVvRDQNIBS7P9xMvOd5Wj45++QG
 Z5Xt23kMKFamMGSa6eD67ul17bnfjY2IZrQjWgsuIPec0eAJ1FsraTJ/zW4cKmEa
 FhW172r5udAlypV7lFdwuzYtQXuU4LaGQNoDjVgrGqhaz/TWMFtsOFvhmww76/jU
 JcmJxuqAyh0l9Iwh7icJo6gsTdW7dvbwv5wCrBEW4W53mscUOLUiPpKaExXWnkOU
 4oi7D7dIWvV/rqMf5VBnQaZXYtPZegh97nRh9Etb5FcbhRCpDJjTp28ZagixqjiG
 4U0AvT4sahcktL3Y3lw=
 =LU35
 -----END PGP SIGNATURE-----

Merge tag 'reset-for-4.17-2' of git://git.pengutronix.de/git/pza/linux into next/drivers

Pull "Reset controller changes for v4.17, part 2" from Philipp Zabel:

This tag contains reset lookup support, similar to pwm lookups, for legacy
non-DT platforms, a few new reset controls and a Kconfig fix for uniphier
SoCs, as well as a new driver for the STM32MP1 peripheral reset controller.

The reset lookups are merged from a separate, immutable branch, that may
also be merged into the davinci tree.

* tag 'reset-for-4.17-2' of git://git.pengutronix.de/git/pza/linux:
  reset: uniphier: add ethernet reset control support for PXs3
  reset: stm32mp1: Enable stm32mp1 reset driver
  dt-bindings: reset: add STM32MP1 resets
  reset: uniphier: add Pro4/Pro5/PXs2 audio systems reset control
  reset: imx7: add 'depends on HAS_IOMEM' to fix unmet dependency
  reset: modify the way reset lookup works for board files
  reset: add support for non-DT systems
2018-03-28 17:02:22 +02:00
Wei Yongjun
ef1b204a70 drm/tegra: dc: Using NULL instead of plain integer
Fixes the following sparse warnings:

drivers/gpu/drm/tegra/dc.c:2181:69: warning:
  Using plain integer as NULL pointer

Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-03-28 17:01:13 +02:00
Dan Haab
2726412061
MIPS: BCM47XX: Add Luxul XAP1500/XWR1750 WiFi LEDs
Some Luxul devices use PCIe connected GPIO LEDs that are not available
until the PCI subsytem and its drivers load. Using the same array for
these LEDs would block registering any LEDs until all GPIOs become
available. This may be undesired behavior as some LEDs should be
available as early as possible (e.g. system status LED). This patch will
allow registering available LEDs while deferring these PCIe GPIO
connected 'extra' LEDs until they become available.

Signed-off-by: Dan Haab <dan.haab@luxul.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/18952/
Signed-off-by: James Hogan <jhogan@kernel.org>
2018-03-28 15:59:36 +01:00