Commit graph

766,468 commits

Author SHA1 Message Date
Alexandre Belloni
68981fd151 rtc: tx4939: switch to rtc_register_device
This allows for future improvement of the driver.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-03-01 10:49:34 +01:00
Alexandre Belloni
faec5f7bcc rtc: tx4939: extend test coverage
The rtc-tx4939 driver now compiles correctly on other architectures, add
COMPILE_TEST to improve code coverage.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-03-01 10:49:34 +01:00
Alexandre Belloni
a0151062ea rtc: tx4939: remove arch/mips dependency
Copy RTC definitions from arch/mips/include/asm/txx9/tx4939.h to the RTC
driver so it doesn't depend on arch/mips anymore.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-03-01 10:49:33 +01:00
Alexandre Belloni
d7ca4299d7 rtc: stk17ta8: use generic nvmem
Instead of adding a binary sysfs attribute from the driver, use the core to
register an nvmem device.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-03-01 10:49:33 +01:00
Alexandre Belloni
8d3e6b55ce rtc: stk17ta8: fix possible race condition
The probe function is not allowed to fail after registering the RTC. Call
rtc_register_device() at the end.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-03-01 10:49:32 +01:00
Alexandre Belloni
91cb6774f6 rtc: stk17ta8: switch to rtc_register_device
This allows for future improvement of the driver.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-03-01 10:49:32 +01:00
Alexandre Belloni
8f21092d65 rtc: stk17ta8: make alarms useful
Currently, the IRQs are disabled when the rtc driver is removed (e.g. when
shutting down the platform).
This means that the RTC will be unable to wakeup the platform.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-03-01 10:49:31 +01:00
Alexandre Belloni
7335fb9be3 rtc: rp5c01: use generic nvmem
Instead of adding a binary sysfs attribute from the driver, use the core to
register an nvmem device.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-03-01 10:49:31 +01:00
Alexandre Belloni
bcdd559268 rtc: rp5c01: fix possible race condition
The probe function is not allowed to fail after registering the RTC because
the following may happen:

CPU0:                                CPU1:
sys_load_module()
 do_init_module()
  do_one_initcall()
   cmos_do_probe()
    rtc_device_register()
     __register_chrdev()
     cdev->owner = struct module*
                                     open("/dev/rtc0")
    rtc_device_unregister()
  module_put()
  free_module()
   module_free(mod->module_core)
   /* struct module *module is now
      freed */
                                      chrdev_open()
                                       spin_lock(cdev_lock)
                                       cdev_get()
                                        try_module_get()
                                         module_is_live()
                                         /* dereferences already
                                            freed struct module* */

Switch to devm_rtc_allocate_device/rtc_register_device to register the rtc
as late as possible.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-03-01 10:49:30 +01:00
Alexandre Belloni
87c78d9512 rtc: ds1742: use generic nvmem
Instead of adding a binary sysfs attribute from the driver (which suffers
from a race condition as the attribute appears after the device), use the
core to register an nvmem device.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-03-01 10:49:30 +01:00
Alexandre Belloni
1358e7b2b3 rtc: ds1742: switch to rtc_register_device
This allows for future improvement of the driver.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-03-01 10:49:29 +01:00
Alexandre Belloni
8b5b7958fd rtc: cmos: use generic nvmem
Instead of adding a binary sysfs attribute from the driver, use the
core to register an nvmem device. This allows to use the in-kernel
interface to access the nvram.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-03-01 10:49:29 +01:00
Alexandre Belloni
53d29e0a3a rtc: cmos: fix possible race condition
The probe function is not allowed to fail after registering the RTC because
the following may happen:

CPU0:                                CPU1:
sys_load_module()
 do_init_module()
  do_one_initcall()
   cmos_do_probe()
    rtc_device_register()
     __register_chrdev()
     cdev->owner = struct module*
                                     open("/dev/rtc0")
    rtc_device_unregister()
  module_put()
  free_module()
   module_free(mod->module_core)
   /* struct module *module is now
      freed */
                                      chrdev_open()
                                       spin_lock(cdev_lock)
                                       cdev_get()
                                        try_module_get()
                                         module_is_live()
                                         /* dereferences already
                                            freed struct module* */

Switch to devm_rtc_allocate_device/rtc_register_device to register the rtc
as late as possible.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-03-01 10:49:29 +01:00
Alexandre Belloni
1af7068d2a rtc: ds1553: make alarms useful
Currently, the IRQs are disabled when the rtc driver is removed (e.g. when
shutting down the platform).
This means that the RTC will be unable to wakeup the platform.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-03-01 10:49:28 +01:00
Alexandre Belloni
3a9a06d44b rtc: ds1553: use generic nvmem
Instead of adding a binary sysfs attribute from the driver (which suffers
from a race condition as the attribute appears after the device), use the
core to register an nvmem device.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-03-01 10:49:28 +01:00
Alexandre Belloni
18c88cc9b0 rtc: ds1553: switch to rtc_register_device
This allows for future improvement of the driver.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-03-01 10:49:27 +01:00
Alexandre Belloni
11ad0b613d rtc: sirfsoc: remove useless sirfsoc_rtc_ioctl
sirfsoc_rtc_ioctl() doesn't implement any actual ioctl, remove it.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-03-01 10:49:27 +01:00
Alexandre Belloni
0ff3565d88 rtc: m48t59: use generic nvmem
Instead of adding a binary sysfs attribute from the driver (which suffers
from a race condition as the attribute appears after the device), use the
core to register an nvmem device.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-03-01 10:49:26 +01:00
Alexandre Belloni
affb842b84 rtc: m48t59: switch to rtc_register_device
This allows for future improvement of the driver.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-03-01 10:49:26 +01:00
Alexandre Belloni
d7501f7094 rtc: ds1343: use generic nvmem
Instead of adding a binary sysfs attribute from the driver (which suffers
from a race condition as the attribute appears after the device), use the
core to register an nvmem device.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-03-01 10:49:25 +01:00
Alexandre Belloni
ab39286403 rtc: ds1343: remove undocumented and useless sysfs files
A documented ABI already exists to get information about the alarm. It is
the only one that is used.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-03-01 10:49:25 +01:00
Alexandre Belloni
1536f6dc9d rtc: ds1343: switch to rtc_register_device
This allows for future improvement of the driver.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-03-01 10:49:24 +01:00
Alexandre Belloni
b5086150a6 rtc: ds1343: simplify regmap initialization
Avoid using memset as gcc can properly initialize structures.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-03-01 10:49:24 +01:00
Alexandre Belloni
0391df74a6 rtc: remove nvmem_config
Because nvmem_config is only used and copied at nvmem registration, remove
it from struct rtc_device.

All the rtc drivers using nvmem are now calling rtc_nvmem_register
directly.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-03-01 10:49:23 +01:00
Alexandre Belloni
ce1ae8eb83 rtc: rv8803: fix possible race condition
The probe function is not allowed to fail after registering the RTC. Call
rtc_register_device() at the end.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-03-01 10:49:23 +01:00
Alexandre Belloni
c07fd9dea2 rtc: rv8803: put struct nvmem_config on the stack
Avoid allocating memory for struct nvmem_config.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-03-01 10:49:22 +01:00
Alexandre Belloni
88d3aadea0 rtc: rv8803: call rtc_nvmem_register()
Call rtc_nvmem_register instead of letting the core do it and stop using
the nvmem_config member of struct rtc_device.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-03-01 10:49:22 +01:00
Alexandre Belloni
0e7a412fa2 rtc: pcf85363: put struct nvmem_config on the stack
Avoid allocating memory for struct nvmem_config.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-03-01 10:49:21 +01:00
Alexandre Belloni
24849d177c rtc: pcf85363: call rtc_nvmem_register()
Call rtc_nvmem_register instead of letting the core do it and stop using
the nvmem_config member of struct rtc_device.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-03-01 10:49:20 +01:00
Alexandre Belloni
ce603842c2 rtc: omap: call rtc_nvmem_register()
Call rtc_nvmem_register instead of letting the core do it and stop using
the nvmem_config member of struct rtc_device.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-03-01 10:49:20 +01:00
Alexandre Belloni
e3f51c0d29 rtc: m48t86: put m48t86_nvmem_cfg on the stack
Move m48t86_nvmem_cfg to the stack of m48t86_rtc_probe. This results in a
very small code size reduction and make it safer on systems with two
similar RTCs:

   text	   data	    bss	    dec	    hex	filename
   1733	    164	      0	   1897	    769	drivers/rtc/rtc-m48t86.o.before
   1793	    100	      0	   1893	    765	drivers/rtc/rtc-m48t86.o.after

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-03-01 10:49:19 +01:00
Alexandre Belloni
3c1bb61fad rtc: m48t86: call rtc_nvmem_register()
Call rtc_nvmem_register instead of letting the core do it and stop using
the nvmem_config member of struct rtc_device.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-03-01 10:49:18 +01:00
Alexandre Belloni
71e19c5e25 rtc: ds1511: put ds1511_nvmem_cfg on the stack
Move ds1511_nvmem_cfg to the stack of ds1511_rtc_probe. This results in a
very small code size reduction and make it safer on systems with two
similar RTCs:

   text	   data	    bss	    dec	    hex	filename
   2128	    164	      4	   2296	    8f8	drivers/rtc/rtc-ds1511.o.before
   2175	    100	      4	   2279	    8e7	drivers/rtc/rtc-ds1511.o.after

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-03-01 10:49:18 +01:00
Alexandre Belloni
16fef39142 rtc: ds1511: call rtc_nvmem_register()
Call rtc_nvmem_register instead of letting the core do it and stop using
the nvmem_config member of struct rtc_device.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-03-01 10:49:17 +01:00
Alexandre Belloni
409baf1785 rtc: ds1307: put struct nvmem_config on the stack
Avoid allocating memory for struct nvmem_config as it is only necessary at
the nvmem registration.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-03-01 10:49:17 +01:00
Alexandre Belloni
e9fb7682fa rtc: ds1307: call rtc_nvmem_register()
Call rtc_nvmem_register instead of letting the core do it and stop using
the nvmem_config member of struct rtc_device.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-03-01 10:49:16 +01:00
Alexandre Belloni
eed9d7a335 rtc: ds1305: put ds1305_nvmem_cfg on the stack
This makes to code safer on system using two similar RTCs.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-03-01 10:49:16 +01:00
Alexandre Belloni
6910614f1e rtc: ds1305: call rtc_nvmem_register()
Call rtc_nvmem_register instead of letting the core do it and stop using
the nvmem_config member of struct rtc_device.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-03-01 10:49:15 +01:00
Alexandre Belloni
fd5cd21d99 rtc: export rtc_nvmem_register() to drivers
Export rtc_nvmem_register() so it can be called from drivers instead of
only the core.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-03-01 10:49:15 +01:00
Alexandre Belloni
ac75779b72 rtc: nvmem: allow registering the nvmem device before the rtc
Switch the parent of the nvmem device to the parent of the rtc device so it
can be registered before the RTC.

This is a small change in the ABI as the nvmem moves out of the
/sys/class/rtc/rtcX folder to be under the parent device folder (that is
where the previous nvram files where registered).

However, it is still available under its correct location,
/sys/bus/nvmem/devices which is the one that should be used by userspace
applications.

The other benefit is that the nvmem device can stay registered even if the
rtc registration fails. Or it is possible to not register the rtc if the
nvmem registration failed.

Finally, it makes a lot of sense for devices that actually have different
i2c or spi addresses for the RTC and the EEPROM. That is basically how it
would end up when using MFD or even completely separate devices.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-03-01 10:49:14 +01:00
Giulio Benetti
e64b6afa98
drm/sun4i: Fix dclk_set_phase
Phase value is not shifted before writing.

Shift left of 28 bits to fit right bits

Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1519836413-35023-1-git-send-email-giulio.benetti@micronovasrl.com
2018-03-01 10:41:27 +01:00
Joonas Lahtinen
bba73071b6 Merge drm-next into drm-intel-next-queued (this time for real)
To pull in the HDCP changes, especially wait_for changes to drm/i915
that Chris wants to build on top of.

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-03-01 11:14:24 +02:00
Dou Liyang
8f1561680f x86/apic: Drop logical_smp_processor_id() inline
The logical_smp_processor_id() inline which is only called in
setup_local_APIC() on x86_32 systems has no real value.

Drop it and directly use GET_APIC_LOGICAL_ID() at the call site and use a
more suitable variable name for readability

Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: andy.shevchenko@gmail.com
Cc: bhe@redhat.com
Cc: ebiederm@xmission.com
Link: https://lkml.kernel.org/r/20180301055930.2396-4-douly.fnst@cn.fujitsu.com
2018-03-01 10:12:21 +01:00
Dou Liyang
3ea9e7ae1a x86/apic: Modernize the pending interrupt code
The pending interrupt check code is old, update the following:

  - Use for_each_set_bit() instead of open coding it
  - Replace printk() with pr_err()
  - Get rid of printk line breaks
  - Make curly braces balanced

Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: bhe@redhat.com
Cc: ebiederm@xmission.com
Link: https://lkml.kernel.org/r/20180301055930.2396-3-douly.fnst@cn.fujitsu.com
2018-03-01 10:12:20 +01:00
Dou Liyang
9b217f3301 x86/apic: Move pending interrupt check code into it's own function
The pending interrupt check code is mixed with the local APIC setup code,
that looks messy.

Extract the related code, move it into a new function named
apic_pending_intr_clear().

Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: bhe@redhat.com
Cc: ebiederm@xmission.com
Link: https://lkml.kernel.org/r/20180301055930.2396-2-douly.fnst@cn.fujitsu.com
2018-03-01 10:12:20 +01:00
Thomas Gleixner
945fd17ab6 x86/cpu_entry_area: Sync cpu_entry_area to initial_page_table
The separation of the cpu_entry_area from the fixmap missed the fact that
on 32bit non-PAE kernels the cpu_entry_area mapping might not be covered in
initial_page_table by the previous synchronizations.

This results in suspend/resume failures because 32bit utilizes initial page
table for resume. The absence of the cpu_entry_area mapping results in a
triple fault, aka. insta reboot.

With PAE enabled this works by chance because the PGD entry which covers
the fixmap and other parts incindentally provides the cpu_entry_area
mapping as well.

Synchronize the initial page table after setting up the cpu entry
area. Instead of adding yet another copy of the same code, move it to a
function and invoke it from the various places.

It needs to be investigated if the existing calls in setup_arch() and
setup_per_cpu_areas() can be replaced by the later invocation from
setup_cpu_entry_areas(), but that's beyond the scope of this fix.

Fixes: 92a0f81d89 ("x86/cpu_entry_area: Move it out of the fixmap")
Reported-by: Woody Suwalski <terraluna977@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Woody Suwalski <terraluna977@gmail.com>
Cc: William Grant <william.grant@canonical.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1802282137290.1392@nanos.tec.linutronix.de
2018-03-01 09:48:27 +01:00
Srinivas Kandagatla
5b4a68952a dmaengine: qcom: bam_dma: disable runtime pm on remote controlled
Remotely controlled BAM instance should not do any power management from
CPU side, as cpu can not reliably say if the BAM is busy or not.

Disable it for such instances.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2018-03-01 14:14:27 +05:30
Srinivas Kandagatla
54eb5e26cb dmaengine: qcom: bam_dma: do not write to global regs in remote mode
BAM_DESC_CNT_TRSHLD register is global register, which can only be written
when BAM is in master mode, So check the mode of operation before writing
it.

Without this check SOC's xPU would catch such access and crash the system.
First noticed on DB820c while testing SLIMBus BAM.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2018-03-01 14:14:27 +05:30
Srinivas Kandagatla
48d163b1aa dmaengine: qcom: bam_dma: get num-channels and num-ees from dt
When Linux is master of BAM, it can directly read registers to know number
of supported channels, however when its remotely controlled reading these
registers would trigger a crash if the BAM is not yet initialized or
powered up on the remote side.

This patch allows driver to read num-channels and num-ees from Device Tree
for remotely controlled BAM.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2018-03-01 14:14:27 +05:30
Srinivas Kandagatla
d545afc907 dt-bindings: dmaengine: bam_dma: add remote controlled bindings
This patch adds 2 new properties for remote controlled bam dt bindings.
1. num-channels to indicate number of dma channels.
2. qcom,num-ees to indicate number of Execution Environments.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2018-03-01 14:14:27 +05:30