Commit graph

766,468 commits

Author SHA1 Message Date
Kees Cook
cb097be703 x86/refcounts: Switch to UD2 for exceptions
As done in commit 3b3a371cc9 ("x86/debug: Use UD2 for WARN()"), this
switches to UD2 from UD0 to keep disassembly readable.

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20180225165056.GA11719@beast
2018-02-28 15:18:40 +01:00
Chris Wilson
367a35a6c6 drm/i915: Don't deref request->ctx inside unlocked print_request()
Although we protect the request itself, we don't lock inside
intel_engine_dump() and so the request maybe retired as we peek into it.
One consequence is that the request->ctx may be freed before we
dereference it, leading to a use-after-free. Replace the hw_id we are
peeking from inside request->ctx with the request->fence.context, with
which we can still track from which context the request originated
(although to tie to HW reports requires a little more legwork, but is
good enough to follow the GEM traces).

[52640.729670] general protection fault: 0000 [#2] SMP
[52640.729694] Dumping ftrace buffer:
[52640.729701]    (ftrace buffer empty)
[52640.729705] Modules linked in: vgem snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic x86_pkg_\
temp_thermal intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul snd_hda_intel snd_hda_codec snd_hwdep gha\
sh_clmulni_intel snd_hda_core snd_pcm mei_me mei i915 r8169 mii prime_numbers i2c_hid
[52640.729748] CPU: 2 PID: 4335 Comm: gem_exec_schedu Tainted: G     UD W        4.16.0-rc3+ #7
[52640.729759] Hardware name: Acer Aspire E5-575G/Ironman_SK  , BIOS V1.12 08/02/2016
[52640.729803] RIP: 0010:print_request+0x2b/0xb0 [i915]
[52640.729811] RSP: 0018:ffffc90001453c18 EFLAGS: 00010206
[52640.729820] RAX: 6b6b6b6b6b6b6b6b RBX: ffff8801e0292d40 RCX: 0000000000000006
[52640.729829] RDX: ffffc90001453c60 RSI: ffff8801e0292d40 RDI: 0000000000000003
[52640.729838] RBP: ffffc90001453d80 R08: 0000000000000000 R09: 0000000000000001
[52640.729847] R10: ffffc90001453bd0 R11: ffffc90001453c73 R12: ffffc90001453c60
[52640.729856] R13: ffffc90001453d80 R14: ffff8801d5a683c8 R15: ffff8801e0292d40
[52640.729866] FS:  00007f1ee50548c0(0000) GS:ffff8801e8200000(0000) knlGS:0000000000000000
[52640.729876] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[52640.729884] CR2: 00007f1ee5077000 CR3: 00000001d9411004 CR4: 00000000003606e0
[52640.729893] Call Trace:
[52640.729922]  intel_engine_print_registers+0x623/0x890 [i915]
[52640.729948]  intel_engine_dump+0x4a3/0x590 [i915]
[52640.729957]  ? seq_printf+0x3a/0x50
[52640.729977]  i915_engine_info+0xb8/0xe0 [i915]
[52640.729984]  ? drm_mode_gamma_get_ioctl+0xf0/0xf0
[52640.729990]  seq_read+0xd5/0x410
[52640.729997]  full_proxy_read+0x4b/0x70
[52640.730004]  __vfs_read+0x1e/0x120
[52640.730009]  ? do_sys_open+0x134/0x220
[52640.730015]  ? kmem_cache_free+0x174/0x2b0
[52640.730021]  vfs_read+0xa1/0x150
[52640.730026]  SyS_read+0x40/0xa0
[52640.730032]  do_syscall_64+0x65/0x1a0
[52640.730038]  entry_SYSCALL_64_after_hwframe+0x42/0xb7

Reported-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180228094732.28462-1-chris@chris-wilson.co.uk
2018-02-28 14:16:42 +00:00
Geert Uytterhoeven
60fc75bdf5 ARM: shmobile: rcar-gen2: Fix error check in regulator quirk
On systems with two regulators, a bogus error message is printed on
success:

    i2c 6-0058: i2c error 2

While adding support for Stout, the number of messages to send was
made variable, but the corresponding return value check of
i2c_transfer() wasn't updated.

Fixes: ff938cd14d ("ARM: shmobile: stout: enable R-Car Gen2 regulator quirk")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-02-28 14:25:49 +01:00
Ville Syrjälä
5857c0d425 drm/i915: Don't mangle the CTM on pre-HSW
On pre-HSW we have dedicated hardware for the RGB limited range
handling, and so we don't want to compress with the CSC matrix.

Toss in a FIXME about gamma LUT vs. limited range using the CSC.

Cc: Johnson Lin <johnson.lin@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180222214232.6064-4-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
2018-02-28 15:17:12 +02:00
Baolin Wang
27263e8dc0 clocksource: Use ATTRIBUTE_GROUPS
Use ATTRIBUTE_GROUPS instead of manually creating the individual device
files.

Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: arnd@arndb.de
Cc: sboyd@codeaurora.org
Cc: broonie@kernel.org
Cc: john.stultz@linaro.org
Link: https://lkml.kernel.org/r/d80dccb981dc2461781ebb8d71a32ccdc1b0e6f9.1516167691.git.baolin.wang@linaro.org
2018-02-28 14:05:07 +01:00
Baolin Wang
e87821d18c clocksource: Use DEVICE_ATTR_RW/RO/WO to define device attributes
Convert DEVICE_ATTR to DEVICE_ATTR_RW/RO/WO which is the preferred and
simpler way of implementation.

Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: arnd@arndb.de
Cc: sboyd@codeaurora.org
Cc: broonie@kernel.org
Cc: john.stultz@linaro.org
Link: https://lkml.kernel.org/r/8f35c77e753e957b61187e8e7b2e4a3d61e4a72b.1516167691.git.baolin.wang@linaro.org
2018-02-28 14:04:52 +01:00
Baolin Wang
7f852afe44 clocksource: Don't walk the clocksource list for empty override
If the override clocksource name is empty there is no point in walking the
clocksource list for a match.

Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: arnd@arndb.de
Cc: sboyd@codeaurora.org
Cc: broonie@kernel.org
Cc: john.stultz@linaro.org
Link: https://lkml.kernel.org/r/069ce2a605546bcad6552968cff755f0a03f9f10.1516167691.git.baolin.wang@linaro.org
2018-02-28 14:04:52 +01:00
Ville Syrjälä
c35e8a25df drm/i915: Rename pipe CSC to use ilk_ prefix
The pipe CSC was introduced by ILK, so change everything related
to use ilk_ as the prefix.

Cc: Johnson Lin <johnson.lin@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180222214232.6064-3-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
2018-02-28 15:00:08 +02:00
Ville Syrjälä
db61d160b3 drm/i915: Remove the pointless 1:1 matrix copy
If we don't have to frob with the user provided ctm matrix there's
no point in copying it over. Just point at the user ctm directly.

Also the matrix gets fully populated by ctm_mult_by_limited() so
no need to zero initialize it.

Cc: Johnson Lin <johnson.lin@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180222214232.6064-2-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
2018-02-28 14:58:23 +02:00
Vineet Gupta
a4f538573c clocksource/drivers/arc_timer: Update some comments
TIMER0 interrupt ACK is different for ARC700 and HS3x cores.

This came to light in some internal discussions and it is nice to have this
documented rather than digging up the PRM (Programmers Reference Manual).

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com>
Cc: linux-snps-arc@lists.infradead.org
Link: https://lkml.kernel.org/r/1519241491-12570-1-git-send-email-vgupta@synopsys.com
2018-02-28 13:55:14 +01:00
Felix Fietkau
5753405e27 clocksource/drivers/mips-gic-timer: Use correct shift count to extract data
__gic_clocksource_init() extracts the GIC_CONFIG_COUNTBITS field from
read_gic_config() by right shifting the register value. The shift count is
determined by the most significant bit (__fls) of the bitmask which is
wrong as it shifts out the complete bitfield.

Use the least significant bit (__ffs) instead to shift the bitfield down to
bit 0.

Fixes: e07127a077 ("clocksource: mips-gic-timer: Use new GIC accessor functions")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: daniel.lezcano@linaro.org
Cc: paul.burton@imgtec.com
Link: https://lkml.kernel.org/r/20180228095610.50341-1-nbd@nbd.name
2018-02-28 13:55:14 +01:00
phil eichinger
5d7f77ec72 serial: imx: fix bogus dev_err
Only one of the two is really required, not both:
* have_rtscts or
* have_rtsgpio

In imx_rs485_config() this is done correctly, so RS485 is working,
just the error message is false.

Signed-off-by: Phil Eichinger <phil@zankapfel.net>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Fixes: b8f3bff057 ("serial: imx: Support common rs485 binding for RTS polarity"
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-28 13:48:21 +01:00
Ulrich Hecht
7842055bfc serial: sh-sci: prevent lockup on full TTY buffers
When the TTY buffers fill up to the configured maximum, a system lockup
occurs:

[  598.820128] INFO: rcu_preempt detected stalls on CPUs/tasks:
[  598.825796]  0-...!: (1 GPs behind) idle=5a6/2/0 softirq=1974/1974 fqs=1
[  598.832577]  (detected by 3, t=62517 jiffies, g=296, c=295, q=126)
[  598.838755] Task dump for CPU 0:
[  598.841977] swapper/0       R  running task        0     0      0 0x00000022
[  598.849023] Call trace:
[  598.851476]  __switch_to+0x98/0xb0
[  598.854870]            (null)

This can be prevented by doing a dummy read of the RX data register.

This issue affects both HSCIF and SCIF ports. Reported for R-Car H3 ES2.0;
reproduced and fixed on H3 ES1.1. Probably affects other R-Car platforms
as well.

Reported-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: stable <stable@vger.kernel.org>
Tested-by: Nguyen Viet Dung <dung.nguyen.aj@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-28 13:48:21 +01:00
Nikola Ciprich
9f2068f357 serial: 8250_pci: Add Brainboxes UC-260 4 port serial device
Add PCI ids for two variants of Brainboxes UC-260 quad port
PCI serial cards.

Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Nikola Ciprich <nikola.ciprich@linuxbox.cz>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-28 13:48:21 +01:00
Greentime Hu
1f66dd36bb earlycon: add reg-offset to physical address before mapping
It will get the wrong virtual address because port->mapbase is not added
the correct reg-offset yet. We have to update it before earlycon_map()
is called

Signed-off-by: Greentime Hu <greentime@andestech.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: stable@vger.kernel.org
Fixes: 088da2a176 ("of: earlycon: Initialize port fields from DT properties")
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-28 13:48:21 +01:00
Sebastian Andrzej Siewior
714569064a serial: core: mark port as initialized in autoconfig
This is a followup on 44117a1d17 ("serial: core: mark port as
initialized after successful IRQ change").
Nikola has been using autoconfig via setserial and reported a crash
similar to what I fixed in the earlier mentioned commit. Here I do the
same fixup for the autoconfig. I wasn't sure that this is the right
approach. Nikola confirmed that it fixes his crash.

Fixes: b3b5764618 ("tty: serial_core: convert uart_open to use tty_port_open")
Link: http://lkml.kernel.org/r/20180131072000.GD1853@localhost.localdomain
Reported-by: Nikola Ciprich <nikola.ciprich@linuxbox.cz>
Tested-by: Nikola Ciprich <nikola.ciprich@linuxbox.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-by: Nikola Ciprich <nikola.ciprich@linuxbox.cz>
Acked-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-28 13:48:21 +01:00
Andy Shevchenko
e7f3e99cb1 serial: 8250_pci: Don't fail on multiport card class
Do not fail on multiport cards in serial_pci_is_class_communication().

It restores behaviour for SUNIX multiport cards, that enumerated by
class and have a custom board data.

Moreover it allows users to reenumerate port-by-port from user space.

Fixes: 7d8905d064 ("serial: 8250_pci: Enable device after we check black list")
Reported-by: Nikola Ciprich <nikola.ciprich@linuxbox.cz>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Nikola Ciprich <nikola.ciprich@linuxbox.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-28 13:48:21 +01:00
Jonas Danielsson
fd63a8903a tty/serial: atmel: add new version check for usart
On our at91sam9260 based board the usart0 and usart1 ports report
their versions (ATMEL_US_VERSION) as 0x10302. This version is not
included in the current checks in the driver.

Signed-off-by: Jonas Danielsson <jonas@orbital-systems.com>
Acked-by: Richard Genoud <richard.genoud@gmail.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-28 13:48:20 +01:00
Colin Ian King
0ef5a6e09b serial: mvebu-uart: remove duplicated bit-wise or of STAT_FRM_ERR
Bit pattern STAT_FRM_ERR is being bit-wise or'd twice; remove the
redundant 2nd STAT_FRM_ERR

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-28 13:46:03 +01:00
Troy Kisky
45ca673e81 tty: serial: imx: allow breaks to be received when using dma
This allows me to login after sending a break when service
serial-getty@ttymxc0.service is running

The "tty_insert_flip_char(port, 0, TTY_BREAK)" in clear_rx_errors
fixes this by allowing the higher layers to see a break.

Also, call uart_handle_break to handle possible
"secure attention key."

FYI: Martin said the ROM sdma firmware works with this patch,
but external sdma firmware still does not send breaks on a
i.mx6UL

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Tested-by: Martin Hicks <mort@bork.org>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-28 13:44:33 +01:00
Joshua Scott
914eaf935e serial: 8250_dw: Allow TX FIFO to drain before writing to UART_LCR
An issue has been observed on the Marvell Armada 38x serial port.

Writes to UART_LCR can result in characters that are currently held in the
TX FIFO being lost rather than sent, even if the userspace process has
attempted to flush them.

This is most visible when using the "resize" command (tested on Busybox),
where we have observed the escape code for restoring cursor position
becoming mangled.

Signed-off-by: Joshua Scott <joshua.scott@alliedtelesis.co.nz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-28 13:40:22 +01:00
Ulrich Hecht
b96408b474 serial: sh-sci: use hrtimer for receive timeout
High latencies of classic timers cause performance issues for high-
speed serial transmissions. This patch transforms rx_timer into an
hrtimer to reduce the minimum latency.

Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-28 13:40:22 +01:00
Vignesh R
08fb00c64f serial: 8250: 8250_omap: Fix throttling when DMA is enabled
omap_8250_throttle() is called when tty RX buffer is about to overflow
and can no longer keep up with the rate at which UART is receiving data.
So, the expectation of this callback, is that UART stops RX and asserts
HW flow control to signal the sender to stop sending more data.
omap_8250_throttle() disables RX FIFO interrupts thus FIFO is no longer
serviced, leading to assertion of flow control once RX FIFO is full.
But, this does not work when DMA is enabled as driver keeps queuing new
RX DMA request in completion handler without brothering about throttling
request made by the higher layer.
This patch introduces a flag that can be used to determine whether or
not to queue next RX DMA request based on throttling request.

Without this patch, tty buffer overflows are reported at higher
baudrates.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-28 13:40:22 +01:00
Vignesh R
2e9fe53910 serial: 8250: Don't service RX FIFO if interrupts are disabled
Currently, data in RX FIFO is read based on UART_LSR register state even
if RDI and RLSI interrupts are disabled in UART_IER register.
This is because when IRQ handler is called due to TX FIFO empty event,
RX FIFO is serviced based on UART_LSR register status instead of
UART_IIR status. This defeats the purpose of disabling UART RX
FIFO interrupts during throttling(see, omap_8250_throttle()) as IRQ
handler continues to drain UART RX FIFO resulting in overflow of buffer
at tty layer.
Fix this by making sure that driver drains UART RX FIFO only when
UART_IIR_RDI is set along with UART_LSR_BI or UART_LSR_DR bits.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-28 13:40:22 +01:00
Sergei Shtylyov
890fb16b4c DT: serial: renesas,sci-serial: document R8A77980 bindings
R-Car V3H (R8A77980) SoC has the R-Car gen3 compatible SCIF and HSCIF ports,
so document the SoC specific bindings.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-28 13:40:22 +01:00
Jan Kundrát
1a9ab351fb gpio: serial: max310x: Use HW type for gpio_chip's label
Some debugging tools (/sys/kernel/debug/gpio, `lsgpio`) use the
gpio_chip's label for displaying an additional context. Right now, the
information duplicates stuff which is already available from the
parent's device. This is how e.g. `lsgpio`'s output looks like:

  GPIO chip: gpiochip2, "spi1.2", 16 GPIO lines

Comparing the output of other GPIO expanders that I have available:

  gpiochip4: GPIOs 464-479, parent: spi/spi1.1, mcp23s17, can sleep:
  gpiochip5: GPIOs 448-463, parent: i2c/0-0020, pca9555, can sleep:
  gpiochip2: GPIOs 496-511, parent: spi/spi1.2, spi1.2, can sleep:

This patch ensures that the type of the real HW device is shown instead
of duplicating the SPI path:

  gpiochip2: GPIOs 496-511, parent: spi/spi1.2, MAX14830, can sleep:

Signed-off-by: Jan Kundrát <jan.kundrat@cesnet.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-28 13:40:22 +01:00
Uwe Kleine-König
eefadcbca7 serial: altera: set RRDY flag also without irq
The UART can be operated without an irq. In this case a timer is setup
that regularily calls altera_uart_interrupt(). The receiving part
depends on pp->imr having the bit ALTERA_UART_STATUS_RRDY_MSK set,
otherwise altera_uart_rx_chars() is never called. So ensure that the bit
gets set (disguised as ALTERA_UART_CONTROL_RRDY_MSK) by not returning
early from altera_uart_startup() if port->irq is 0.

This doesn't affect the hardware as the ALTERA_UART_CONTROL_RRDY_MSK bit
isn't actually written to the control register.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-28 13:30:09 +01:00
Uwe Kleine-König
2ea6ad8bc6 serial: altera: don't enable any irq if the device doesn't feature an irq
If the irq line of an altera UART device isn't used to report interrupts
for this device the driver better ensures that this device doesn't pull
this line to active state and so disturb the whatever might be connected
to this line.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-28 13:30:09 +01:00
Uwe Kleine-König
0e254963b6 serial: altera: ensure port->regshift is honored consistently
Most register accesses in the altera driver honor port->regshift by
using altera_uart_writel(). There are a few accesses however that were
missed when the driver was converted to use port->regshift and some
others were added later in commit 4d9d7d896d ("serial: altera_uart:
add earlycon support").

Fixes: 2780ad42f5 ("tty: serial: altera_uart: Use port->regshift to store bus shift")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-28 13:30:09 +01:00
Rafael J. Wysocki
356b57752c platform/x86: intel-hid: Reset wakeup capable flag on removal
The intel-hid device will not be able to wake up the system any more
after removing the notify handler provided by its driver, so make
its sysfs attributes reflect that.

Fixes: ef884112e5 (platform: x86: intel-hid: Wake up the system from suspend-to-idle)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-02-28 14:26:27 +02:00
Rafael J. Wysocki
250b044e1a platform/x86: intel-vbtn: Reset wakeup capable flag on removal
The intel-vbtn device will not be able to wake up the system any more
after removing the notify handler provided by its driver, so make
its sysfs attributes reflect that.

Fixes: 91f9e850d4 (platform: x86: intel-vbtn: Wake up the system from suspend-to-idle)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-02-28 14:26:27 +02:00
Tejun Heo
28b0f8a696 tty: make n_tty_read() always abort if hangup is in progress
A tty is hung up by __tty_hangup() setting file->f_op to
hung_up_tty_fops, which is skipped on ttys whose write operation isn't
tty_write().  This means that, for example, /dev/console whose write
op is redirected_tty_write() is never actually marked hung up.

Because n_tty_read() uses the hung up status to decide whether to
abort the waiting readers, the lack of hung-up marking can lead to the
following scenario.

 1. A session contains two processes.  The leader and its child.  The
    child ignores SIGHUP.

 2. The leader exits and starts disassociating from the controlling
    terminal (/dev/console).

 3. __tty_hangup() skips setting f_op to hung_up_tty_fops.

 4. SIGHUP is delivered and ignored.

 5. tty_ldisc_hangup() is invoked.  It wakes up the waits which should
    clear the read lockers of tty->ldisc_sem.

 6. The reader wakes up but because tty_hung_up_p() is false, it
    doesn't abort and goes back to sleep while read-holding
    tty->ldisc_sem.

 7. The leader progresses to tty_ldisc_lock() in tty_ldisc_hangup()
    and is now stuck in D sleep indefinitely waiting for
    tty->ldisc_sem.

The following is Alan's explanation on why some ttys aren't hung up.

 http://lkml.kernel.org/r/20171101170908.6ad08580@alans-desktop

 1. It broke the serial consoles because they would hang up and close
    down the hardware. With tty_port that *should* be fixable properly
    for any cases remaining.

 2. The console layer was (and still is) completely broken and doens't
    refcount properly. So if you turn on console hangups it breaks (as
    indeed does freeing consoles and half a dozen other things).

As neither can be fixed quickly, this patch works around the problem
by introducing a new flag, TTY_HUPPING, which is used solely to tell
n_tty_read() that hang-up is in progress for the console and the
readers should be aborted regardless of the hung-up status of the
device.

The following is a sample hung task warning caused by this issue.

  INFO: task agetty:2662 blocked for more than 120 seconds.
        Not tainted 4.11.3-dbg-tty-lockup-02478-gfd6c7ee-dirty #28
  "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
      0  2662      1 0x00000086
  Call Trace:
   __schedule+0x267/0x890
   schedule+0x36/0x80
   schedule_timeout+0x23c/0x2e0
   ldsem_down_write+0xce/0x1f6
   tty_ldisc_lock+0x16/0x30
   tty_ldisc_hangup+0xb3/0x1b0
   __tty_hangup+0x300/0x410
   disassociate_ctty+0x6c/0x290
   do_exit+0x7ef/0xb00
   do_group_exit+0x3f/0xa0
   get_signal+0x1b3/0x5d0
   do_signal+0x28/0x660
   exit_to_usermode_loop+0x46/0x86
   do_syscall_64+0x9c/0xb0
   entry_SYSCALL64_slow_path+0x25/0x25

The following is the repro.  Run "$PROG /dev/console".  The parent
process hangs in D state.

  #include <sys/types.h>
  #include <sys/stat.h>
  #include <sys/wait.h>
  #include <sys/ioctl.h>
  #include <fcntl.h>
  #include <unistd.h>
  #include <stdio.h>
  #include <stdlib.h>
  #include <errno.h>
  #include <signal.h>
  #include <time.h>
  #include <termios.h>

  int main(int argc, char **argv)
  {
	  struct sigaction sact = { .sa_handler = SIG_IGN };
	  struct timespec ts1s = { .tv_sec = 1 };
	  pid_t pid;
	  int fd;

	  if (argc < 2) {
		  fprintf(stderr, "test-hung-tty /dev/$TTY\n");
		  return 1;
	  }

	  /* fork a child to ensure that it isn't already the session leader */
	  pid = fork();
	  if (pid < 0) {
		  perror("fork");
		  return 1;
	  }

	  if (pid > 0) {
		  /* top parent, wait for everyone */
		  while (waitpid(-1, NULL, 0) >= 0)
			  ;
		  if (errno != ECHILD)
			  perror("waitpid");
		  return 0;
	  }

	  /* new session, start a new session and set the controlling tty */
	  if (setsid() < 0) {
		  perror("setsid");
		  return 1;
	  }

	  fd = open(argv[1], O_RDWR);
	  if (fd < 0) {
		  perror("open");
		  return 1;
	  }

	  if (ioctl(fd, TIOCSCTTY, 1) < 0) {
		  perror("ioctl");
		  return 1;
	  }

	  /* fork a child, sleep a bit and exit */
	  pid = fork();
	  if (pid < 0) {
		  perror("fork");
		  return 1;
	  }

	  if (pid > 0) {
		  nanosleep(&ts1s, NULL);
		  printf("Session leader exiting\n");
		  exit(0);
	  }

	  /*
	   * The child ignores SIGHUP and keeps reading from the controlling
	   * tty.  Because SIGHUP is ignored, the child doesn't get killed on
	   * parent exit and the bug in n_tty makes the read(2) block the
	   * parent's control terminal hangup attempt.  The parent ends up in
	   * D sleep until the child is explicitly killed.
	   */
	  sigaction(SIGHUP, &sact, NULL);
	  printf("Child reading tty\n");
	  while (1) {
		  char buf[1024];

		  if (read(fd, buf, sizeof(buf)) < 0) {
			  perror("read");
			  return 1;
		  }
	  }

	  return 0;
  }

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Alan Cox <alan@llwyncelyn.cymru>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-28 13:21:10 +01:00
Kees Cook
f54450ad19 console: Drop added "static" for newport_con
Commit 4fe505119778 ("console: Expand dummy functions for CFI") accidentally
added "static" to newport_con instance of struct consw, while trying to
normalize the declarations. This, however, needed to stay non-static as it
has an extern.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Fixes: 4fe505119778 ("console: Expand dummy functions for CFI")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-28 13:12:38 +01:00
Michael Ellerman
b7abbd5a35 selftests/powerpc: Fix missing clean of pmu/lib.o
The tm-resched-dscr test links against pmu/lib.o, but we don't have a
rule to clean pmu/lib.o. This can lead to a build break if you build
for big endian and then little, or vice versa.

Fix it by making tm-resched-dscr depend on pmu/lib.c, causing the code
to be built directly in, meaning no .o is generated.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-02-28 22:28:35 +11:00
Guenter Roeck
64c3f648c2 powerpc/boot: Fix random libfdt related build errors
Once in a while I see build errors similar to the following
when building images from a clean tree.

  Building powerpc:virtex-ml507:44x/virtex5_defconfig ... failed
  ------------
  Error log:
  arch/powerpc/boot/treeboot-akebono.c:37:20: fatal error:
  	libfdt.h: No such file or directory

  Building powerpc🎍smpdev:44x/bamboo_defconfig ... failed
  ------------
  Error log:
  arch/powerpc/boot/treeboot-akebono.c:37:20: fatal error:
  	libfdt.h: No such file or directory

  arch/powerpc/boot/treeboot-currituck.c:35:20: fatal error:
       libfdt.h: No such file or directory

Rebuilds will succeed.

Turns out that several source files in arch/powerpc/boot/ include
libfdt.h, but Makefile dependencies are incomplete. Let's fix that.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-02-28 22:28:34 +11:00
Ville Syrjälä
68824bb59d drm/uapi: The ctm matrix uses sign-magnitude representation
The documentation for the ctm matrix suggests a two's complement
format, but at least the i915 implementation is using sign-magnitude
instead. And looks like malidp is doing the same. Change the docs
to match the current implementation, and change the type from __s64
to __u64 to drive the point home.

Cc: dri-devel@lists.freedesktop.org
Cc: Mihail Atanassov <mihail.atanassov@arm.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Brian Starkey <brian.starkey@arm.com>
Cc: Mali DP Maintainers <malidp@foss.arm.com>
Cc: Johnson Lin <johnson.lin@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180222214232.6064-1-ville.syrjala@linux.intel.com
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
2018-02-28 13:27:37 +02:00
Richard Fitzgerald
d7789f5bcd
ASoC: wm_adsp: For TLV controls only register TLV get/set
Normal 512-byte get/set of a TLV isn't supported but we were
registering the normal get/set anyway and relying on omitting
the SNDRV_CTL_ELEM_ACCESS_[READ|WRITE] flags to prevent them
being called.

Trouble is if this gets broken in the core ALSA code - as it has
been since at least 4.14 - the standard get/set can be called
unexpectedly and corrupt memory.

There's no point providing functions that won't be called and
it's a trivial change. The benefit is that if the ALSA core gets
broken again we get a big fat immediate NULL dereference instead
of a memory corruption timebomb.

Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
2018-02-28 10:38:40 +00:00
Joonas Lahtinen
f074037a2e Merge drm-next into drm-intel-next-queued
To pull in the HDCP changes, especially wait_for changes to drm/i915
that Chris wants to build on top of.

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-02-28 12:12:03 +02:00
Jyri Sarha
7f78c3d69d drm/tilcdc: tilcdc_panel: Rename device from "panel" to "tilcdc-panel"
Rename the bundled tilcdc_panel driver from just "panel" to
"tilcdc-panel" to avoid noisy error messages from the driver trying to
probe all device nodes named "panel".

Signed-off-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2018-02-28 11:48:25 +02:00
Jyri Sarha
544f7377d9 drm/tilcdc: Add support for drm panels
Add support for drm panels to tilcdc. Adding the support on top of the
existing bridge support needs only couple of lines of code when using
using the drm panel bridge helpers.

Signed-off-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2018-02-28 11:48:16 +02:00
Baegjae Sung
9bd82b1a44 nvme-multipath: fix sysfs dangerously created links
If multipathing is enabled, each NVMe subsystem creates a head
namespace (e.g., nvme0n1) and multiple private namespaces
(e.g., nvme0c0n1 and nvme0c1n1) in sysfs. When creating links for
private namespaces, links of head namespace are used, so the
namespace creation order must be followed (e.g., nvme0n1 ->
nvme0c1n1). If the order is not followed, links of sysfs will be
incomplete or kernel panic will occur.

The kernel panic was:
  kernel BUG at fs/sysfs/symlink.c:27!
  Call Trace:
    nvme_mpath_add_disk_links+0x5d/0x80 [nvme_core]
    nvme_validate_ns+0x5c2/0x850 [nvme_core]
    nvme_scan_work+0x1af/0x2d0 [nvme_core]

Correct order
Context A     Context B
nvme0n1
nvme0c0n1     nvme0c1n1

Incorrect order
Context A     Context B
              nvme0c1n1
nvme0n1
nvme0c0n1

The nvme_mpath_add_disk (for creating head namespace) is called
just before the nvme_mpath_add_disk_links (for creating private
namespaces). In nvme_mpath_add_disk, the first context acquires
the lock of subsystem and creates a head namespace, and other
contexts do nothing by checking GENHD_FL_UP of a head namespace
after waiting to acquire the lock. We verified the code with or
without multipathing using three vendors of dual-port NVMe SSDs.

Signed-off-by: Baegjae Sung <baegjae@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <keith.busch@intel.com>
2018-02-28 02:46:48 -07:00
Mustamin B Mustaffa
73c0fcac97 drm/i915: Enable VBT based BL control for DP
Currently, BXT_PP is hardcoded with value '0'.
It practically disabled eDP backlight on MRB (BXT) platform.

This patch will tell which BXT_PP registers (there are two set of
PP_CONTROL in the spec) to be used as defined in VBT (Video Bios Timing
table) and this will enabled eDP backlight controller on MRB (BXT)
platform.

v2:
 - Remove unnecessary information in commit message.
 - Assign vbt.backlight.controller to a backlight_controller variable and
   return the variable value.
v3:
 - Rebased to latest code base.
 - updated commit title.

Signed-off-by: Mustamin B Mustaffa <mustamin.b.mustaffa@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180227030734.37901-1-mustamin.b.mustaffa@intel.com
2018-02-28 11:37:45 +02:00
Chris Wilson
128326a10c drm/i915: Repeat the GEM_BUG_ON message in the ftrace log
As the ftrace log is overflowing the pstore capture, we lose the last
gasps from dmesg which includes the GEM_BUG_ON function:line and condition
that failed. Vital information for tracking down the bug, so append it to
the frace log as well.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180227211816.5546-1-chris@chris-wilson.co.uk
2018-02-28 09:31:57 +00:00
Markus Elfring
b225e74254 drm/tilcdc: panel: Use common error handling code in of_get_panel_info()
Add a jump target so that a bit of exception handling can be better reused
at the end of this function.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Jyri Sarha <jsarha@ti.com>
2018-02-28 11:25:36 +02:00
Markus Elfring
3366ba38ca drm/tilcdc: Delete an error message for a failed memory allocation in seven functions
Omit an extra message for a memory allocation failure in these functions.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Jyri Sarha <jsarha@ti.com>
2018-02-28 11:25:35 +02:00
Peter Rosin
377999caf7 dt-bindings: at24: sort manufacturers alphabetically
Makes them easier to find.

Signed-off-by: Peter Rosin <peda@axentia.se>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2018-02-28 09:56:23 +01:00
Takeshi Kihara
a8ab4f2bd8 pinctrl: sh-pfc: r8a77965: Add support for INTC-EX IRQ pins
Most pins on the R8A77965 SoC can be configured in GPIO mode for
interrupt and GPIO functionality, while a couple of them can also
be routed to the INTC-EX hardware block (formerly known as IRQC).

On R8A77965 the INTC-EX hardware handles pins IRQ0 -> IRQ5 and
this patch adds support for them to the PFC driver as "intc_ex_irqN".

Based on a similar patch for the R8A7795 PFC driver by Magnus Damm
<damm+renesas@opensource.se>.

Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-02-28 09:17:54 +01:00
Roger Quadros
084a804e01 usb: dwc3: Fix lock-up on ID change during system suspend/resume
To reproduce the lock up do the following
- connect otg host adapter and a USB device to the dual-role port
so that it is in host mode.
- suspend to mem.
- disconnect otg adapter.
- resume the system.

If we call dwc3_host_exit() before tasks are thawed
xhci_plat_remove() seems to lock up at the second usb_remove_hcd() call.

To work around this we queue the _dwc3_set_mode() work on
the system_freezable_wq.

Fixes: 41ce1456e1 ("usb: dwc3: core: make dwc3_set_mode() work properly")
Cc: <stable@vger.kernel.org> # v4.12+
Suggested-by: Manu Gautam <mgautam@codeaurora.org>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-02-28 09:57:04 +02:00
Takashi Iwai
c77a6edb6d ALSA: x86: Fix potential crash at error path
When LPE audio driver gets some error at probing, it may lead to a
crash because of canceling the pending work in hdmi_lpe_audio_free(),
since some of ports might be still not initialized.

For assuring the proper free of each port, initialize all ports at the
beginning of the probe.

Fixes: b4eb0d522f ("ALSA: x86: Split snd_intelhad into card and PCM specific structures")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-02-28 08:46:00 +01:00
Takashi Iwai
350144069a ALSA: x86: Fix missing spinlock and mutex initializations
The commit change for supporting the multiple ports moved involved
some code shuffling, and there the initializations of spinlock and
mutex in snd_intelhad object were dropped mistakenly.

This patch adds the missing initializations again for each port.

Fixes: b4eb0d522f ("ALSA: x86: Split snd_intelhad into card and PCM specific structures")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-02-28 08:40:26 +01:00