The free_io_pgtable_ops() function tests whether its argument is NULL
and then returns immediately. Thus the test around the call is not needed.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Will Deacon <will.deacon@arm.com>
The ARM SMMUv3 driver uses dma_{alloc,free}_coherent to manage its
queues and configuration data structures.
This patch converts the driver to the managed (dmam_*) API, so that
resources are freed automatically on device teardown. This greatly
simplifies the failure paths and allows us to remove a bunch of
handcrafted freeing code.
Signed-off-by: Will Deacon <will.deacon@arm.com>
PRIQ_0_OF has been removed from the SMMUv3 architecture, so remove its
corresponding (and unused) #define from the driver.
Signed-off-by: Will Deacon <will.deacon@arm.com>
AZX_DCAPS_POSFIX_VIA is coupled always with AZX_DRIVER_VIA type, so we
don't have to keep this bit in dcaps. Save one more!
Signed-off-by: Takashi Iwai <tiwai@suse.de>
AZX_DCAPS_RIRB_DELAY is dedicated only for Nvidia and its purpose is
just to set a flag in bus. So it's better to be set in the toplevel
driver, either hda_intel.c or hda_tegra.c, instead of the common
hda_controller.c. This also allows us to strip this flag from dcaps,
so save one more bit there.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
By default DISPC asserts hsync and vsync sequentially, i.e. there's
first hsync and that is immediately followed by vsync. This is the only
available behaviour on OMAP2/3, and default behaviour on OMAP4+.
OMAP4+ has ALIGN bit in POL_FREQ register, which makes DISPC assert both
syncs at the same time.
It has been observed that some panels don't like sequential syncs (AM5
EVM's panel). After studying the datasheets for multiple panels and
encoders, and MIPI DPI spec, it looks like there is no standard way to
handle this.
Sometimes the datasheets don't mention the required syncs behaviour at
all, sometimes the datasheets have images that hint towards simultaneous
syncs, and sometimes it is explicitly mentioned that simultaneous syncs
are needed. No panels or encoders requiring sequential sync was found.
It thus seems to be safe to default to simultaneous syncs when the ALIGN
bit is available. This fixed AM5 EVM's panel, and no side effects have
been observed on other panels or encoders.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Update omapdss driver to set the state of the pins to:
- "default on resume
- "sleep" on suspend
By optionally putting the pins into sleep state in the suspend callback
we can accomplish two things.
- minimize current leakage from pins and thus save power,
- prevent the IP from driving pins output in an uncontrolled manner,
which may happen if the power domain drops the domain regulator.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Enable new kernel cpu hotplug functionality by allowing cpu dlpar requests
to be initiated from sysfs.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Add the ability to hotplug add cpus via rtas hotplug events by either
specifying the drc index of the CPU to add, or providing a count of the
number of CPUs to add.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Add the ability to dlpar remove CPUs via hotplug rtas events, either by
specifying the drc-index of the CPU to remove or providing a count of cpus
to remove.
To remove multiple cpus in a single request we create a list of possible
DR (Dynamic Reconfiguration) cpus and their drc indexes that can be
removed. We can then traverse the list remove each cpu and easily clean
up in any cases of failure.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Update the cpu dlpar add/remove paths to do better error recovery when
a failure occurs during the add/remove operation.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Re-factor the cpu hotplug code to support doing cpu hotplug completely in
the kernel and using the existing sysfs probe/release interfaces. This
patch pulls out pieces of existing cpu hotplug code into common routines,
dlpar_cpu_add() and dlpar_cpu_remove(), to be used by both interfaces.
There are no functional changes introduced.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
No functional changes, this patch is simply a move of the cpu hotplug
code from pseries/dlpar.c to pseries/hotplug-cpu.c. This is in an effort
to consolidate all of the cpu hotplug code in a common place.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When DLPAR adding a CPU we should verify that the CPU does not already
exist. Failure to do so can generate a kernel oops;
[ 9.465585] kernel BUG at arch/powerpc/platforms/pseries/dlpar.c:382!
[ 9.465796] Oops: Exception in kernel mode, sig: 5 [#1]
This oops can be generated by causing a probe to be performed on a cpu
by writing to the sysfs cpu probe file (/sys/devices/system/cpu/probe).
This patch adds a check for the existence of cpu prior to probing the cpu
so userspace doing the wrong thing won't trigger a BUG_ON().
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
PPC476FPE has a different PVR from previous PPC476 processors. The
kexec code checks the PVR in order to correctly setup the MMU. When
the initial support for 476FPE processors was added the corresponding
change in the kexec code was missed. This patch simply adds the check
and solves the following bug on kexec:
kexec: Starting new kernel
Bye!
Unable to handle kernel paging request for instruction fetch
Faulting instruction address: 0xee9a50f8
cpu 0x0: Vector: 400 (Instruction Access) at [ee9d7d20]
pc: ee9a50f8
lr: ee9a50e4
sp: ee9d7dd0
msr: 21020
current = 0xee40f000
pid = 960, comm = kexec
enter ? for help
[link register ] ee9a50e4
[ee9d7dd0] c0013748 default_machine_kexec+0x58/0x70 (unreliable)
[ee9d7df0] c0012f04 machine_kexec+0x34/0x40
[ee9d7e00] c00aa1ec kernel_kexec+0x9c/0xb0
[ee9d7e20] c005d704 SyS_reboot+0x1f4/0x220
[ee9d7f40] c000db68 ret_from_syscall+0x0/0x3c
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
NVLink is a high speed interconnect that is used in conjunction with a
PCI-E connection to create an interface between CPU and GPU that
provides very high data bandwidth. A PCI-E connection to a GPU is used
as the control path to initiate and report status of large data
transfers sent via the NVLink.
On IBM Power systems the NVLink processing unit (NPU) is similar to
the existing PHB3. This patch adds support for a new NPU PHB type. DMA
operations on the NPU are not supported as this patch sets the TCE
translation tables to be the same as the related GPU PCIe device for
each NVLink. Therefore all DMA operations are setup and controlled via
the PCIe device.
EEH is not presently supported for the NPU devices, although it may be
added in future.
Signed-off-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Move __raw_rm_writeq() from platforms/powernv/pci-ioda.c to
include/asm/io.h so that it can be used by other code.
Signed-off-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This commit removed the pcidev field from struct pci_dn as it was no
longer in use by the kernel. However to support finding the
association of Nvlink devices to GPU devices from the device-tree this
field is required.
This reverts commit 250c7b277c ("powerpc/pci: Remove unused struct
pci_dn.pcidev field").
Signed-off-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The name of PCI root bus's M64 resource isn't initialized properly.
When dumping "/proc/iomem", "<BAD>" is seen for those M64 resources
on PCI root buses.
~# cat /proc/iomem | grep -e "BAD"
3b0000000000-3b0fefffffff : <BAD>
3b1000000000-3b1fefffffff : <BAD>
3c0000000000-3c0fefffffff : <BAD>
3c1000000000-3c1fefffffff : <BAD>
3c2000000000-3c2fefffffff : <BAD>
This fixes the issue by setting the name of PCI root bus's M64
resource to that of PHB's device node full name. With the patch,
no "<BAD>" is seen from "/proc/iomem".
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
User space checkpoint and restart tool (CRIU) needs the page's change
to be soft tracked. This allows to do a pre checkpoint and then dump
only touched pages.
This is done by using a newly assigned PTE bit (_PAGE_SOFT_DIRTY) when
the page is backed in memory, and a new _PAGE_SWP_SOFT_DIRTY bit when
the page is swapped out.
To introduce a new PTE _PAGE_SOFT_DIRTY bit value common to hash 4k
and hash 64k pte, the bits already defined in hash-*4k.h should be
shifted left by one.
The _PAGE_SWP_SOFT_DIRTY bit is dynamically put after the swap type in
the swap pte. A check is added to ensure that the bit is not
overwritten by _PAGE_HPTEFLAGS.
Signed-off-by: Laurent Dufour <ldufour@linux.vnet.ibm.com>
CC: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The STD_EXCEPTION_PSERIES macro takes both a vector number, and a
location (memory address). However both are always identical, so combine
them to save repeating ourselves.
This does mean an exception handler must always exist at the location in
memory that matches its vector number. But that's OK because this is the
"STD" macro (standard), which does exactly that. We have other macros
for the other cases, eg. STD_EXCEPTION_PSERIES_OOL (out of line).
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
HMT_MEDIUM_PPR_DISCARD is a macro which is present at the start of most
of our first level exception handlers. It conditionally executes a
HMT_MEDIUM instruction, which sets the processor priority to medium.
On on modern systems, ie. Power7 and later, it is nop'ed out at boot.
All it does is make the exception vectors more cramped, and consume 4
bytes of icache.
On old systems it has the effect of boosting the processor priority at
the start of exception processing. If we were previously in the idle
loop for example, we may be at low or very low priority. This is
desirable as we want to process the exception as fast as possible.
However looking closely at the generated code, we see that in all cases
we execute another HMT_MEDIUM just four instructions later. With code
patching applied, the final code on an old (Power6) system will look
like, eg:
c000000000000300 <data_access_pSeries>:
c000000000000300: 7c 42 13 78 mr r2,r2 <-
c000000000000304: 7d b2 43 a6 mtsprg 2,r13
c000000000000308: 7d b1 42 a6 mfsprg r13,1
c00000000000030c: f9 2d 00 80 std r9,128(r13)
c000000000000310: 60 00 00 00 nop
c000000000000314: 7c 42 13 78 mr r2,r2 <-
So I suggest that the added code complexity of HMT_MEDIUM_PPR_DISCARD is
not justified by the benefit of boosting the processor priority for the
duration of four instructions, and therefore we drop it.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
There are no longer any users of enter_rtas() outside of rtas.c, so make
it "private", by moving the declaration inside rtas.c. Hopefully this
will encourage people to use one of the wrappers which takes the sharp
edges off the RTAS calling sequence.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Although call_rtas_display_status() does actually want to use the
regular RTAS locking, it doesn't want the extra logic that is in
rtas_call(), so currently it open codes the logic.
Instead we can use rtas_call_unlocked(), after taking the RTAS lock.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Most users of RTAS (Run-Time Abstraction Services) use rtas_call(),
which deals with locking as well as endian handling.
However we have two users outside of rtas.c that can't use rtas_call()
because they have different locking requirements.
The hotplug CPU code can't take the RTAS lock because the CPU would go
offline with the lock held and no other CPUs would be able to call RTAS
until the CPU came back online.
The xmon code doesn't want to take the lock because it would risk dead
locking when we are trying to recover from a crash.
Both sites required multiple patches when we added little endian
support, proving that programmers can't do endian right.
Although that ship has sailed, we can still clean the code up by
providing an unlocked version of rtas_call() which avoids the need to
open code the logic elsewhere.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Long ago, only in the lab, there was OPALv1 and OPALv2. Now there is
just OPALv3, with nobody ever expecting anything on pre-OPALv3 to
be cared about or supported by mainline kernels.
So, let's remove FW_FEATURE_OPALv3 and instead use FW_FEATURE_OPAL
exclusively.
Signed-off-by: Stewart Smith <stewart@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
OPALv2 only ever existed in the lab and didn't escape to the world.
All OPAL systems in the wild are OPALv3.
The probability of there being an OPALv2 system still powered on
anywhere inside IBM is approximately zero, let alone anyone
expecting to run mainline kernels.
So, start to remove references to OPALv2.
Signed-off-by: Stewart Smith <stewart@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The OpenPower Abstraction Layer firmware went through a couple
of iterations in the lab before being released. What we now know
as OPAL advertises itself as OPALv3.
OPALv2 and OPALv1 never made it outside the lab, and the possibility
of anyone at all ever building a mainline kernel today and expecting
it to boot on such hardware is zero.
Signed-off-by: Stewart Smith <stewart@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In systems with three levels of cache(PoU at L1 and PoC at L3),
PoC cache flush instructions flushes L2 and L3 caches which could affect
performance.
For cache flushes for I and D coherency, PoU should suffice.
So changing all I and D coherency related cache flushes to PoU.
Introduced a new __clean_dcache_area_pou API for dcache flush till PoU
and provided a common macro for __flush_dcache_area and
__clean_dcache_area_pou.
Also, now in __sync_icache_dcache, icache invalidation for non-aliasing
VIPT icache is done only for that particular page instead of the earlier
__flush_icache_all.
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Ashok Kumar <ashoks@broadcom.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
When doing a direct IO write, __blockdev_direct_IO() can call the
btrfs_get_blocks_direct() callback one or more times before it calls the
btrfs_submit_direct() callback. However it can fail after calling the
first callback and before calling the second callback, which is a problem
because the first one creates ordered extents and the second one is the
one that submits bios that cover the ordered extents created by the first
one. That means the ordered extents will never complete nor have any of
the flags BTRFS_ORDERED_IO_DONE / BTRFS_ORDERED_IOERR set, resulting in
subsequent operations (such as other direct IO writes, buffered writes or
hole punching) that lock the same IO range and lookup for ordered extents
in the range to hang forever waiting for those ordered extents because
they can not complete ever, since no bio was submitted.
Fix this by tracking a range of created ordered extents that don't have
yet corresponding bios submitted and completing the ordered extents in
the range if __blockdev_direct_IO() fails with an error.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
If readpages() (triggered by defrag or buffered reads) is called while a
direct IO write is in progress, we have a small time window where we can
deadlock, resulting in traces like the following being generated:
[84723.212993] INFO: task fio:2849 blocked for more than 120 seconds.
[84723.214310] Tainted: G W 4.3.0-rc5-btrfs-next-17+ #1
[84723.215640] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[84723.217313] fio D ffff88023ec75218 0 2849 2835 0x00000000
[84723.218778] ffff880122dfb6e8 0000000000000092 0000000000000000 ffff88023ec75200
[84723.220458] ffff88000e05d2c0 ffff880122dfc000 ffff88023ec75200 7fffffffffffffff
[84723.230597] 0000000000000002 ffffffff8147891a ffff880122dfb700 ffffffff8147856a
[84723.232085] Call Trace:
[84723.232625] [<ffffffff8147891a>] ? bit_wait+0x3c/0x3c
[84723.233529] [<ffffffff8147856a>] schedule+0x7d/0x95
[84723.234398] [<ffffffff8147baa3>] schedule_timeout+0x43/0x10b
[84723.235384] [<ffffffff810f82eb>] ? time_hardirqs_on+0x15/0x28
[84723.236426] [<ffffffff8108a23d>] ? trace_hardirqs_on+0xd/0xf
[84723.237502] [<ffffffff810af8a3>] ? read_seqcount_begin.constprop.20+0x57/0x6d
[84723.238807] [<ffffffff8108a09b>] ? trace_hardirqs_on_caller+0x16/0x1ab
[84723.242012] [<ffffffff8108a23d>] ? trace_hardirqs_on+0xd/0xf
[84723.243064] [<ffffffff810af2ad>] ? timekeeping_get_ns+0xe/0x33
[84723.244116] [<ffffffff810afa2e>] ? ktime_get+0x41/0x52
[84723.245029] [<ffffffff81477cff>] io_schedule_timeout+0xb7/0x12b
[84723.245942] [<ffffffff81477cff>] ? io_schedule_timeout+0xb7/0x12b
[84723.246596] [<ffffffff81478953>] bit_wait_io+0x39/0x45
[84723.247503] [<ffffffff81478b93>] __wait_on_bit_lock+0x49/0x8d
[84723.248540] [<ffffffff8111684f>] __lock_page+0x66/0x68
[84723.249558] [<ffffffff81081c9b>] ? autoremove_wake_function+0x3a/0x3a
[84723.250844] [<ffffffff81124a04>] lock_page+0x2c/0x2f
[84723.251871] [<ffffffff81124afc>] invalidate_inode_pages2_range+0xf5/0x2aa
[84723.253274] [<ffffffff81117c34>] ? filemap_fdatawait_range+0x12d/0x146
[84723.254757] [<ffffffff81118191>] ? filemap_fdatawrite_range+0x13/0x15
[84723.256378] [<ffffffffa05139a2>] btrfs_get_blocks_direct+0x1b0/0x664 [btrfs]
[84723.258556] [<ffffffff8119e3f9>] ? submit_page_section+0x7b/0x111
[84723.260064] [<ffffffff8119eb90>] do_blockdev_direct_IO+0x658/0xbdb
[84723.261479] [<ffffffffa05137f2>] ? btrfs_page_exists_in_range+0x1a9/0x1a9 [btrfs]
[84723.262961] [<ffffffffa050a8a6>] ? btrfs_writepage_start_hook+0xce/0xce [btrfs]
[84723.264449] [<ffffffff8119f144>] __blockdev_direct_IO+0x31/0x33
[84723.265614] [<ffffffff8119f144>] ? __blockdev_direct_IO+0x31/0x33
[84723.266769] [<ffffffffa050a8a6>] ? btrfs_writepage_start_hook+0xce/0xce [btrfs]
[84723.268264] [<ffffffffa050935d>] btrfs_direct_IO+0x1b9/0x259 [btrfs]
[84723.270954] [<ffffffffa050a8a6>] ? btrfs_writepage_start_hook+0xce/0xce [btrfs]
[84723.272465] [<ffffffff8111878c>] generic_file_direct_write+0xb3/0x128
[84723.273734] [<ffffffffa051955c>] btrfs_file_write_iter+0x228/0x404 [btrfs]
[84723.275101] [<ffffffff8116ca6f>] __vfs_write+0x7c/0xa5
[84723.276200] [<ffffffff8116cfab>] vfs_write+0xa0/0xe4
[84723.277298] [<ffffffff8116d79d>] SyS_write+0x50/0x7e
[84723.278327] [<ffffffff8147cd97>] entry_SYSCALL_64_fastpath+0x12/0x6f
[84723.279595] INFO: lockdep is turned off.
[84723.379035] INFO: task btrfs:2923 blocked for more than 120 seconds.
[84723.380323] Tainted: G W 4.3.0-rc5-btrfs-next-17+ #1
[84723.381608] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[84723.383003] btrfs D ffff88023ed75218 0 2923 2859 0x00000000
[84723.384277] ffff88001311f860 0000000000000082 ffff88001311f840 ffff88023ed75200
[84723.385748] ffff88012c6751c0 ffff880013120000 ffff88012042fe68 ffff88012042fe30
[84723.387152] ffff880221571c88 0000000000000001 ffff88001311f878 ffffffff8147856a
[84723.388620] Call Trace:
[84723.389105] [<ffffffff8147856a>] schedule+0x7d/0x95
[84723.391882] [<ffffffffa051da32>] btrfs_start_ordered_extent+0x161/0x1fa [btrfs]
[84723.393718] [<ffffffff81081c61>] ? signal_pending_state+0x31/0x31
[84723.395659] [<ffffffffa0522c5b>] __do_contiguous_readpages.constprop.21+0x81/0xdc [btrfs]
[84723.397383] [<ffffffffa050ac96>] ? btrfs_submit_direct+0x3f0/0x3f0 [btrfs]
[84723.398852] [<ffffffffa0522da3>] __extent_readpages.constprop.20+0xed/0x100 [btrfs]
[84723.400561] [<ffffffff81123f6c>] ? __lru_cache_add+0x5d/0x72
[84723.401787] [<ffffffffa0523896>] extent_readpages+0x111/0x1a7 [btrfs]
[84723.403121] [<ffffffffa050ac96>] ? btrfs_submit_direct+0x3f0/0x3f0 [btrfs]
[84723.404583] [<ffffffffa05088fa>] btrfs_readpages+0x1f/0x21 [btrfs]
[84723.406007] [<ffffffff811226df>] __do_page_cache_readahead+0x168/0x1f4
[84723.407502] [<ffffffff81122988>] ondemand_readahead+0x21d/0x22e
[84723.408937] [<ffffffff81122988>] ? ondemand_readahead+0x21d/0x22e
[84723.410487] [<ffffffff81122af1>] page_cache_sync_readahead+0x3d/0x3f
[84723.411710] [<ffffffffa0535388>] btrfs_defrag_file+0x419/0xaaf [btrfs]
[84723.413007] [<ffffffffa0531db0>] ? kzalloc+0xf/0x11 [btrfs]
[84723.414085] [<ffffffffa0535b43>] btrfs_ioctl_defrag+0x125/0x14e [btrfs]
[84723.415307] [<ffffffffa0536753>] btrfs_ioctl+0x746/0x24c6 [btrfs]
[84723.416532] [<ffffffff81087481>] ? arch_local_irq_save+0x9/0xc
[84723.417731] [<ffffffff8113ad61>] ? __might_fault+0x4c/0xa7
[84723.418699] [<ffffffff8113ad61>] ? __might_fault+0x4c/0xa7
[84723.421532] [<ffffffff8113adba>] ? __might_fault+0xa5/0xa7
[84723.422629] [<ffffffff81171139>] ? cp_new_stat+0x15d/0x174
[84723.423712] [<ffffffff8117c610>] do_vfs_ioctl+0x427/0x4e6
[84723.424801] [<ffffffff81171175>] ? SYSC_newfstat+0x25/0x2e
[84723.425968] [<ffffffff8118574d>] ? __fget_light+0x4d/0x71
[84723.427063] [<ffffffff8117c726>] SyS_ioctl+0x57/0x79
[84723.428138] [<ffffffff8147cd97>] entry_SYSCALL_64_fastpath+0x12/0x6f
Consider the following logical and physical file layout:
logical: ... [ prealloc extent A ] [ prealloc extent B ] [ extent C ] ...
4K 8K 16K
physical: ... 12853248 12857344 1103101952 ...
(= 12853248 + 4K)
Extents A and B are physically adjacent. The following diagram shows a
sequence of events that lead to the deadlock when we attempt to do a
direct IO write against the file range [4K, 16K[ and a defrag is triggered
simultaneously.
CPU 1 CPU 2
btrfs_direct_IO()
btrfs_get_blocks_direct()
creates ordered extent A, covering
the 4k prealloc extent A (range [4K, 8K[)
btrfs_defrag_file()
page_cache_sync_readahead([0K, 1M[)
btrfs_readpages()
extent_readpages()
locks all pages in the file
range [0K, 128K[ through calls
to add_to_page_cache_lru()
__do_contiguous_readpages()
finds ordered extent A
waits for it to complete
btrfs_get_blocks_direct() called again
lock_extent_direct(range [8K, 16K[)
finds a page in range [8K, 16K[ through
btrfs_page_exists_in_range()
invalidate_inode_pages2_range([8K, 16K[)
--> tries to lock pages that are already
locked by the task at CPU 2
--> our task, running __blockdev_direct_IO(),
hangs waiting to lock the pages and the
submit bio callback, btrfs_submit_direct(),
ends up never being called, resulting in the
ordered extent A never completing (because a
corresponding bio is never submitted) and
CPU 2 will wait for it forever while holding
the pages locked
---> deadlock!
Fix this by removing the page invalidation approach when attempting to
lock the range for IO from the callback btrfs_get_blocks_direct() and
falling back buffered IO. This was a rare case anyway and well behaved
applications do not mix concurrent direct IO writes with buffered reads
anyway, being a concurrent defrag the only normal case that could lead
to the deadlock.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Commit 61de718fce ("Btrfs: fix memory corruption on failure to submit
bio for direct IO") fixed problems with the error handling code after we
fail to submit a bio for direct IO. However there were 2 problems that it
did not address when the failure is due to memory allocation failures for
direct IO writes:
1) We considered that there could be only one ordered extent for the whole
IO range, which is not always true, as we can have multiple;
2) It did not set the bit BTRFS_ORDERED_IO_DONE in the ordered extent,
which can make other tasks running btrfs_wait_logged_extents() hang
forever, since they wait for that bit to be set. The general assumption
is that regardless of an error, the BTRFS_ORDERED_IO_DONE is always set
and it precedes setting the bit BTRFS_ORDERED_COMPLETE.
Fix these issues by moving part of the btrfs_endio_direct_write() handler
into a new helper function and having that new helper function called when
we fail to allocate memory to submit the bio (and its private object) for
a direct IO write.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
When a transaction is aborted, or its commit fails before writing the new
superblock and calling btrfs_finish_extent_commit(), we leak reference
counts on the block groups attached to the transaction's delete_bgs list,
because btrfs_finish_extent_commit() is never called for those two cases.
Fix this by dropping their references at btrfs_put_transaction(), which
is called when transactions are aborted (by making the transaction kthread
commit the transaction) or if their commits fail.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
During the final phase of a device replace operation, I ran into a
transaction abort that resulted in the following trace:
[23919.655368] WARNING: CPU: 10 PID: 30175 at fs/btrfs/extent-tree.c:9843 btrfs_create_pending_block_groups+0x15e/0x1ab [btrfs]()
[23919.664742] BTRFS: Transaction aborted (error -2)
[23919.665749] Modules linked in: btrfs crc32c_generic xor raid6_pq nfsd auth_rpcgss oid_registry nfs_acl nfs lockd grace fscache sunrpc loop fuse parport_pc i2c_piix4 parport psmouse acpi_cpufreq processor i2c_core evdev microcode pcspkr button serio_raw ext4 crc16 jbd2 mbcache sd_mod sg sr_mod cdrom virtio_scsi ata_generic ata_piix virtio_pci floppy virtio_ring libata e1000 virtio scsi_mod [last unloaded: btrfs]
[23919.679442] CPU: 10 PID: 30175 Comm: fsstress Not tainted 4.3.0-rc5-btrfs-next-17+ #1
[23919.682392] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.1-0-g4adadbd-20150316_085822-nilsson.home.kraxel.org 04/01/2014
[23919.689151] 0000000000000000 ffff8804020cbb50 ffffffff812566f4 ffff8804020cbb98
[23919.692604] ffff8804020cbb88 ffffffff8104d0a6 ffffffffa03eea69 ffff88041b678a48
[23919.694230] ffff88042ac38000 ffff88041b678930 00000000fffffffe ffff8804020cbbf0
[23919.696716] Call Trace:
[23919.698669] [<ffffffff812566f4>] dump_stack+0x4e/0x79
[23919.700597] [<ffffffff8104d0a6>] warn_slowpath_common+0x9f/0xb8
[23919.701958] [<ffffffffa03eea69>] ? btrfs_create_pending_block_groups+0x15e/0x1ab [btrfs]
[23919.703612] [<ffffffff8104d107>] warn_slowpath_fmt+0x48/0x50
[23919.705047] [<ffffffffa03eea69>] btrfs_create_pending_block_groups+0x15e/0x1ab [btrfs]
[23919.706967] [<ffffffffa0402097>] __btrfs_end_transaction+0x84/0x2dd [btrfs]
[23919.708611] [<ffffffffa0402300>] btrfs_end_transaction+0x10/0x12 [btrfs]
[23919.710099] [<ffffffffa03ef0b8>] btrfs_alloc_data_chunk_ondemand+0x121/0x28b [btrfs]
[23919.711970] [<ffffffffa0413025>] btrfs_fallocate+0x7d3/0xc6d [btrfs]
[23919.713602] [<ffffffff8108b78f>] ? lock_acquire+0x10d/0x194
[23919.714756] [<ffffffff81086dbc>] ? percpu_down_read+0x51/0x78
[23919.716155] [<ffffffff8116ef1d>] ? __sb_start_write+0x5f/0xb0
[23919.718918] [<ffffffff8116ef1d>] ? __sb_start_write+0x5f/0xb0
[23919.724170] [<ffffffff8116b579>] vfs_fallocate+0x170/0x1ff
[23919.725482] [<ffffffff8117c1d7>] ioctl_preallocate+0x89/0x9b
[23919.726790] [<ffffffff8117c5ef>] do_vfs_ioctl+0x406/0x4e6
[23919.728428] [<ffffffff81171175>] ? SYSC_newfstat+0x25/0x2e
[23919.729642] [<ffffffff8118574d>] ? __fget_light+0x4d/0x71
[23919.730782] [<ffffffff8117c726>] SyS_ioctl+0x57/0x79
[23919.731847] [<ffffffff8147cd97>] entry_SYSCALL_64_fastpath+0x12/0x6f
[23919.733330] ---[ end trace 166ef301a335832a ]---
This is due to a race between device replace and chunk allocation, which
the following diagram illustrates:
CPU 1 CPU 2
btrfs_dev_replace_finishing()
at this point
dev_replace->tgtdev->devid ==
BTRFS_DEV_REPLACE_DEVID (0ULL)
...
btrfs_start_transaction()
btrfs_commit_transaction()
btrfs_fallocate()
btrfs_alloc_data_chunk_ondemand()
btrfs_join_transaction()
--> starts a new transaction
do_chunk_alloc()
lock fs_info->chunk_mutex
btrfs_alloc_chunk()
--> creates extent map for
the new chunk with
em->bdev->map->stripes[i]->dev->devid
== X (X > 0)
--> extent map is added to
fs_info->mapping_tree
--> initial phase of bg A
allocation completes
unlock fs_info->chunk_mutex
lock fs_info->chunk_mutex
btrfs_dev_replace_update_device_in_mapping_tree()
--> iterates fs_info->mapping_tree and
replaces the device in every extent
map's map->stripes[] with
dev_replace->tgtdev, which still has
an id of 0ULL (BTRFS_DEV_REPLACE_DEVID)
btrfs_end_transaction()
btrfs_create_pending_block_groups()
--> starts final phase of
bg A creation (update device,
extent, and chunk trees, etc)
btrfs_finish_chunk_alloc()
btrfs_update_device()
--> attempts to update a device
item with ID == 0ULL
(BTRFS_DEV_REPLACE_DEVID)
which is the current ID of
bg A's
em->bdev->map->stripes[i]->dev->devid
--> doesn't find such item
returns -ENOENT
--> the device id should have been X
and not 0ULL
got -ENOENT from
btrfs_finish_chunk_alloc()
and aborts current transaction
finishes setting up the target device,
namely it sets tgtdev->devid to the value
of srcdev->devid, which is X (and X > 0)
frees the srcdev
unlock fs_info->chunk_mutex
So fix this by taking the device list mutex when processing the chunk's
extent map stripes to update the device items. This avoids getting the
wrong device id and use-after-free problems if the task finishing a
chunk allocation grabs the replaced device, which is freed while the
dev replace task is holding the device list mutex.
This happened while running fstest btrfs/071.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
The ARM compiler inserts calls to __aeabi_idiv() and
__aeabi_uidiv() when it needs to perform division on signed and
unsigned integers. If a processor has support for the sdiv and
udiv instructions, the kernel may overwrite the beginning of those
functions with those instructions and a "bx lr" to get better
performance.
To ensure that those functions are aligned to a 32-bit word for easier
patching (which might not always be the case in Thumb mode) and that
the two patched instructions end up in the same cache line, a 8-byte
alignment is enforced when ARM_PATCH_IDIV is selected.
This was heavily inspired by a previous patch from Stephen Boyd.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR
Signed-off-by: Prasanna Karthik <mkarthi3@visteon.com>
Signed-off-by: Nathan Lynch <nathan_lynch@mentor.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
The proc-v7.S code uses a small temporary stack to preserve register
content in its setup code. This stack is located in the .text section
which is normally meant to be read-only.
Move that temporary stack to the .bss section and get its address in
a position independent way, similarly to what we do in other parts
of the kernel.
While at it, one comments was updated to reflect reality, and the list
of saved registers in the proc-v7.S case is updated to match the comment
next to it for coherency.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
All platforms that used to define an sci_fck clock have now switched to
the fck name. Remove the fallback code.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The SCIF variant in the sh7734 SoC is not the common "SH-4(A)" variant,
but a derivative with added "Baud Rate Generator for External Clock"
(BRG). Correct the regtype value in platform data to fix this.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The sh-sci driver falls back to the peripheral clock if the sci_ick
clock doesn't exist. There's thus no need to create an alias for the
peripheral clock named sci_ick.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The SCI driver requires a functional clock named "fck" and falls back to
"sci_ick" or "sci_fck" when the "fck" clock doesn't exist. To allow
removal of the fallback code rename the sci_ick and sci_fck clocks to
fck for all SH platforms.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add support for using the Baud Rate Generator for External Clock (BRG), as
found on some SCIF and HSCIF variants, to provide the sampling clock.
This can improve baud rate range and accuracy.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for using the SCIx clock pin "(H)SCK" as an external clock
input on (H)SCI(F), providing the sampling clock.
Note that this feature is not yet supported on the select SCIFA variants
that also have it (e.g. sh7723, sh7724, and r8a7740).
On (H)SCIF variants with an External Baud Rate Generator (BRG), the
BRG Clock Select Register must be configured for the external clock.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Refactor the clock and baud rate parameter code to ease adding support
for multiple sampling clock sources.
sci_scbrr_calc() now returns the bit rate error, so it can be compared
to the bit rate error using other sampling clock sources.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
