Rather than crafting custom macros for reading/writing each system
register provide generics accessors, read_sysreg and write_sysreg, for
this purpose.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Suzuki Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
It would add guest exit statistics to debugfs, this can be helpful
while measuring KVM performance.
[ Renamed some of the field names - Christoffer ]
Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
vgic_io_ops is only referenced within vgic.c, so it can be declared
static.
Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
The Kconfig currently controlling compilation of this code is:
config QUOTA
bool "Quota support"
...meaning that it currently is not being built as a module by anyone.
Lets remove the couple traces of modularity so that when reading the
driver there is no doubt it is builtin-only.
Since module_init translates to device_initcall in the non-modular
case, the init ordering gets bumped to one level earlier when we
use the more appropriate fs_initcall here. However we've made similar
changes before without any fallout and none is expected here either.
We don't delete module.h because the code in turn tries to load other
modules as appropriate and so it still needs that header.
Cc: Jan Kara <jack@suse.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Jan Kara <jack@suse.cz>
The Kconfig currently controlling compilation of this code is:
config QUOTA_NETLINK_INTERFACE
bool "Report quota messages through netlink interface"
...meaning that it currently is not being built as a module by anyone.
Lets remove the couple traces of modularity so that when reading the
driver there is no doubt it is builtin-only.
Since module_init translates to device_initcall in the non-modular
case, the init ordering gets bumped to one level earlier when we
use the more appropriate fs_initcall here. However we've made similar
changes before without any fallout and none is expected here either.
Cc: Jan Kara <jack@suse.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Mesh Point requires peer security key install when running
in secured mode since it's a type of peer links, otherwise peer
link will be removed due to key install failure.
MFP feature set is required to run Mesh in secured mode and
QCA988X firmware, 10.2.4.70.14-2 and above, is the only one
supporting secured Mesh at this moment.
Signed-off-by: Peter Oh <poh@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
for_each_matching_node() performs an of_node_get() on each iteration, so
a break out of the loop requires an of_node_put().
A simplified version of the semantic patch that fixes this problem is as
follows (http://coccinelle.lip6.fr):
// <smpl>
@@
local idexpression n;
expression e;
@@
for_each_matching_node(n,...) {
...
(
of_node_put(n);
|
e = n
|
+ of_node_put(n);
? break;
)
...
}
... when != n
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Currently the provided initial value for bcm2835_gpio_direction_output
has no effect. So fix this issue by changing the value before
changing the GPIO direction. As a result we need to move the function below
bcm2835_gpio_set.
Suggested-by: Martin Sperl <kernel@martin.sperl.org>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Acked-by: Eric Anholt <eric@anholt.net>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Fixes: e1b2dc70cd ("pinctrl: add bcm2835 driver")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
There is code to divide by "bus_speed" some lines below.
To eliminate the possibility of division by zero, bail out if
"clock-frequency" is specified as zero.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
This input clock is used to generate the sampling clock for I2C bus.
If the clock rate is zero, there is something wrong with the clock
driver. Bail out with the appropriate error message in such a case.
It would make it easier to find the root cause of failure.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
There is code to divide by "bus_speed" some lines below.
To eliminate the possibility of division by zero, bail out if
"clock-frequency" is specified as zero.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
This input clock is used to generate the sampling clock for I2C bus.
If the clock rate is zero, there is something wrong with the clock
driver. Bail out with the appropriate error message in such a case.
It would make it easier to find the root cause of failure.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Switch to the new generic functions. Plain convert, no functionality
added yet.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
The probe function is a little bit messy, something here, something
there. Rework it so that there is some order: first init the private
structure, then the adapter, then do HW init. This also allows us to
remove the device argument of the clock calculation function, because it
now can be deduced from the private structure. Also, shorten some lines
where possible. This is a preparation for further refactoring.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Inspired from the i2c-rk3x driver (thanks guys!) but refactored and
extended. See built-in docs for further information.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Use the drm_atomic_helper_suspend() and drm_atomic_helper_resume()
helpers to implement subsystem-level suspend/resume.
v2: suspend framebuffer device to avoid concurrency issues
v3: resume fbdev on failure to suspend (Emil Velikov)
Signed-off-by: Thierry Reding <treding@nvidia.com>
Checking for sor->aux in eDP specific code is unnecessary because eDP
inherently requires a valid AUX channel.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Instead of getting a pointer to the driver-specific wrapper of AUX
channels, use the AUX channel objects directly to avoid hackish casting
between the two types.
Signed-off-by: Thierry Reding <treding@nvidia.com>
This only grabs the mutex when really needed, but still has a might-
acquire lockdep check to make sure that's always possible. With this
patch Tegra DRM is officially struct_mutex free, yay!
v2: refernce_unlocked doesn't exist as kbuild spotted.
Cc: Thierry Reding <thierry.reding@gmail.com>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
[treding@nvidia.com: remove unused variables]
Signed-off-by: Thierry Reding <treding@nvidia.com>
Since David Herrmann's mmap vma manager rework we don't need to grab
dev->struct_mutex any more to prevent races when looking up the mmap
offset. Drop it and instead don't forget to use the unref_unlocked
variant (since the drm core still cares).
v2: Finally get rid of the copypasta from another commit in this
commit message. And convert to _unlocked like we need to (Patrik).
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
For drm_gem_object_unreference callers are required to hold
dev->struct_mutex, which these paths don't. Enforcing this requirement
has become a bit more strict with
commit ef4c6270bf
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Thu Oct 15 09:36:25 2015 +0200
drm/gem: Check locking in drm_gem_object_unreference
Cc: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Use the new multi-driver module helpers to get rid of some boilerplate
in the module initialization and cleanup functions.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The host1x unit found in Tegra210 SoCs is very similar to the unit in
Tegra124, but it has 2 additional channels for a total of 14 channels.
Signed-off-by: Thierry Reding <treding@nvidia.com>
When unregistering a host1x driver, make sure to unregister the core
driver as well to prevent it from sticking around and oppose reloading
of the driver.
Signed-off-by: Thierry Reding <treding@nvidia.com>
These new helpers simplify implementing multi-driver modules and
properly handle failure to register one driver by unregistering all
previously registered drivers.
Signed-off-by: Thierry Reding <treding@nvidia.com>
When a transaction is aborted, VSR values should rollback to the
checkpointed values before the transaction began. VSRs used elsewhere in
the kernel during a transaction, or while the transaction is suspended
should not affect the checkpointed values.
Prior to the bug fix in commit d31626f70b ("powerpc: Don't corrupt
transactional state when using FP/VMX in kernel") when VMX was requested
by the kernel the .vr_state (which held the checkpointed state of VSRs
before the transaction) was overwritten with the current state from
outside the transation. Thus if the transaction did not complete, the
VSR values would be "rolled back" to potentially incorrect values.
Signed-off-by: Rashmica Gupta <rashmicy@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Currently if you are in xmon without an oops etc. to view the kernel
version you have to type "d $linux_banner" - not necessarily obvious. As
this is useful information, append to the output of "e" command.
Example output:
$mon> e
cpu 0x1: Vector: 0 at [c0000000f879ba80]
pc: c000000000081718: sysrq_handle_xmon+0x68/0x80
lr: c000000000081718: sysrq_handle_xmon+0x68/0x80
sp: c0000000f879bbe0
msr: 8000000000009033
current = 0xc0000000f604d5c0
paca = 0xc00000000fdc0480 softe: 0 irq_happened: 0x01
pid = 2467, comm = bash
Linux version 4.4.0-rc2-00008-gc51af91c3ab3-dirty (rashmica@circle) (gcc
version 5.1.1 20150629 (GCC) ) #45 SMP Wed Nov 25 10:25:12 AEDT 2015
Signed-off-by: Rashmica Gupta <rashmicy@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
All users of QPACE have upgraded to QPACE2 so remove the Cell QPACE code.
Signed-off-by: Rashmica Gupta <rashmicy@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Kernel prints respective warnings about various EPOW events for
user information/action after parsing EPOW interrupts. At times
below EPOW reset event warning is seen to be flooding kernel log
over a period of time.
May 25 03:46:34 alp kernel: Non critical power or cooling issue cleared
May 25 03:46:52 alp kernel: Non critical power or cooling issue cleared
May 25 03:53:48 alp kernel: Non critical power or cooling issue cleared
May 25 03:55:46 alp kernel: Non critical power or cooling issue cleared
May 25 03:56:34 alp kernel: Non critical power or cooling issue cleared
May 25 03:59:04 alp kernel: Non critical power or cooling issue cleared
May 25 04:02:01 alp kernel: Non critical power or cooling issue cleared
These EPOW reset events are spurious in nature and are triggered by
firmware without an actual EPOW event being reset. This patch avoids these
multiple EPOW reset warnings by using a counter variable. This variable
is incremented every time an EPOW event is reported. Upon receiving a EPOW
reset event the same variable is checked to filter out spurious events and
decremented accordingly.
This patch also improves log messages to better describe EPOW event being
reported. Merged adjacent log messages into single one to reduce number of
lines printed per event.
Signed-off-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Signed-off-by: Vipin K Parashar <vipin@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Test the kernels signal generation code to ensure it can handle an
invalid stack pointer when transactional.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Tested-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
[mpe: Skip if we don't have TM]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Test the kernel's signal return code to ensure that it doesn't crash
when both the transactional and suspend MSR bits are set in the signal
context.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Tested-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
[mpe: Skip if we don't have TM]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Move have_htm_nosc() into a new tm.h, and add a new helper, have_htm()
which we'll use in the next patch.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
- tm: Block signal return from setting invalid MSR state from Michael Neuling
- tm: Check for already reclaimed tasks from Michael Neuling
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=IL8A
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.4-3' into next
Merge the two TM fixes we merged in 4.4. We are about to merge selftests
for these, and without the fixes the selftests will oops.
powerpc fixes for 4.4 #2
- tm: Block signal return from setting invalid MSR state from Michael Neuling
- tm: Check for already reclaimed tasks from Michael Neuling
Print MSR TM bits in oops messages. This appends them to the end
like this:
MSR: 8000000502823031 <SF,VEC,VSX,FP,ME,IR,DR,LE,TM[TE]>
You get the TM[] only if at least one TM MSR bit is set. Inside the
TM[], E means Enabled (bit 32), S means Suspended (bit 33), and T
means Transactional (bit 34)
If no bits are set, you get no TM[] output.
Include rework of printbits() to handle this case.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Also, sort the properties alphabetically and make indentation
consistent. Wording largely taken from i2c-rk3x.txt, thanks guys!
Only "i2c-scl-internal-delay-ns" is new, the rest is used by two drivers
already and was documented in their driver binding documentation.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
According to memory-barriers.txt, xchg*, cmpxchg* and their atomic_
versions all need to be fully ordered, however they are now just
RELEASE+ACQUIRE, which are not fully ordered.
So also replace PPC_RELEASE_BARRIER and PPC_ACQUIRE_BARRIER with
PPC_ATOMIC_ENTRY_BARRIER and PPC_ATOMIC_EXIT_BARRIER in
__{cmp,}xchg_{u32,u64} respectively to guarantee fully ordered semantics
of atomic{,64}_{cmp,}xchg() and {cmp,}xchg(), as a complement of commit
b97021f855 ("powerpc: Fix atomic_xxx_return barrier semantics")
This patch depends on patch "powerpc: Make value-returning atomics fully
ordered" for PPC_ATOMIC_ENTRY_BARRIER definition.
Cc: stable@vger.kernel.org # 3.2+
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch adds EFI stub support for the ARM Linux kernel.
The EFI stub operates similarly to the x86 and arm64 stubs: it is a
shim between the EFI firmware and the normal zImage entry point, and
sets up the environment that the zImage is expecting. This includes
optionally loading the initrd and device tree from the system partition
based on the kernel command line.
Signed-off-by: Roy Franz <roy.franz@linaro.org>
Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Matt Fleming <matt@codeblueprint.co.uk>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
According to memory-barriers.txt:
> Any atomic operation that modifies some state in memory and returns
> information about the state (old or new) implies an SMP-conditional
> general memory barrier (smp_mb()) on each side of the actual
> operation ...
Which mean these operations should be fully ordered. However on PPC,
PPC_ATOMIC_ENTRY_BARRIER is the barrier before the actual operation,
which is currently "lwsync" if SMP=y. The leading "lwsync" can not
guarantee fully ordered atomics, according to Paul Mckenney:
https://lkml.org/lkml/2015/10/14/970
To fix this, we define PPC_ATOMIC_ENTRY_BARRIER as "sync" to guarantee
the fully-ordered semantics.
This also makes futex atomics fully ordered, which can avoid possible
memory ordering problems if userspace code relies on futex system call
for fully ordered semantics.
Fixes: b97021f855 ("powerpc: Fix atomic_xxx_return barrier semantics")
Cc: stable@vger.kernel.org # 3.2+
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Avoid getting sample rate on AudioQuest DragonFly as it is unsupported
and causes noisy "cannot get freq at ep 0x1" messages when playback
starts.
Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
AudioQuest DragonFly DAC reports a volume control range of 0..50
(0x0000..0x0032) which in USB Audio means a range of 0 .. 0.2dB, which
is obviously incorrect and would cause software using the dB information
in e.g. volume sliders to have a massive volume difference in 100..102%
range.
Commit 2d1cb7f658 ("ALSA: usb-audio: add dB range mapping for some
devices") added a dB range mapping for it with range 0..50 dB.
However, the actual volume mapping seems to be neither linear volume nor
linear dB scale, but instead quite close to the cubic mapping e.g.
alsamixer uses, with a range of approx. -53...0 dB.
Replace the previous quirk with a custom dB mapping based on some basic
output measurements, using a 10-item range TLV (which will still fit in
alsa-lib MAX_TLV_RANGE_SIZE).
Tested on AudioQuest DragonFly HW v1.2. The quirk is only applied if the
range is 0..50, so if this gets fixed/changed in later HW revisions it
will no longer be applied.
v2: incorporated Takashi Iwai's suggestion for the quirk application
method
Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The new VMD device driver needs to iterate over a list of
"demultiplexing" interrupts. Protecting that list with a lock is not
possible because the list is also required in code pathes which hold
irq descriptor lock. Therefor the demultiplexing interrupt handler
would create a lock inversion scenario if it calls a demux handler
with the list protection lock held.
A solution for this is to free the irq descriptor via RCU, so the
list can be walked with rcu read lock held.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Keith Busch <keith.busch@intel.com>
By adding labels to the cpu nodes in the dtsi, a dts that
includes it can change the OPPs by referencing the cpu0
through the label.
Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com>
Reviewed-by: Sören Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
The SLCR (System-Level Control Registers) block is an MFD (Multi
Function Device) rather than a bus.
"simple-mfd" seems a more suitable compatible string than "simple-bus".
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
GPIO can be used as interrupt-controller. Add the missing properties to
the GPIO node.
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
If a interrupt chip utilizes chip->buslock then free_irq() can
deadlock in the following way:
CPU0 CPU1
interrupt(X) (Shared or spurious)
free_irq(X) interrupt_thread(X)
chip_bus_lock(X)
irq_finalize_oneshot(X)
chip_bus_lock(X)
synchronize_irq(X)
synchronize_irq() waits for the interrupt thread to complete,
i.e. forever.
Solution is simple: Drop chip_bus_lock() before calling
synchronize_irq() as we do with the irq_desc lock. There is nothing to
be protected after the point where irq_desc lock has been released.
This adds chip_bus_lock/unlock() to the remove_irq() code path, but
that's actually correct in the case where remove_irq() is called on
such an interrupt. The current users of remove_irq() are not affected
as none of those interrupts is on a chip which requires buslock.
Reported-by: Fredrik Markström <fredrik.markstrom@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
