GPIO core:
- extend the gpio-regmap abstraction layer with more features allowing users
to override configuration setting, translate register values and masks and
enable/disable interrupts
- extend GPIO kunit tests with suites verifying probe ordering by software
node devlink support and software node hogs
- shrink GPIO kunit initialization code
- coding style updates (remove commas from sentinels where applicable)
- with all users now converted treewide to using real firmware node links for
software node GPIO lookup: remove the deprecated label-matching mechanism
from from GPIO core
- drop redundant return value check of nonseekable_open() in gpiolib-cdev
- use IRQ trigger helpers where applicable
Driver updates:
- refactor error paths and logging in gpio-nomadik
- use more modern interfaces for getting resources in gpio-rockchip,
gpio-bt8xx and gpio-pca9570
- add missing MODULE_DEVICE_TABLE() to gpio-sifive and gpio-vf610
- drop unused FILONOFF macro from gpio-rcar
- extend build coverage of ioport GPIO drivers with COMPILE_TEST=y
- only enable the gpio-rtd driver by default with ARCH_REALTEK=y to avoid
bloating the build
- refactor coding style in several drivers
- use correct endianess translation in gpio-pcf85x
- add wake-up interrupt support to gpio-mvebu
- apply initial value in direction output setter in gpio-by-pinctrl
Misc:
- replace linux/gpio.h inclusions treewide with linux/gpio/legacy.h which now
exports all the deprecated APIs
- select GPIOLIB_LEGACY in Kconfig where required treewide
- use software nodes for gpio-keys in MFD drivers
Devicetree bindings:
- describe the realtek rtd1625 GPIO controller
- document new models for gpio-pca95xx and gpio-cadence
- document new property in gpio-rockchip
-----BEGIN PGP SIGNATURE-----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=rUDt
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v7.3-rc1-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"GPIO core:
- extend the gpio-regmap abstraction layer with more features
allowing users to override configuration setting, translate
register values and masks and enable/disable interrupts
- extend GPIO kunit tests with suites verifying probe ordering by
software node devlink support and software node hogs
- shrink GPIO kunit initialization code
- coding style updates (remove commas from sentinels where
applicable)
- with all users now converted treewide to using real firmware node
links for software node GPIO lookup: remove the deprecated
label-matching mechanism from from GPIO core
- drop redundant return value check of nonseekable_open() in
gpiolib-cdev
- use IRQ trigger helpers where applicable
Driver updates:
- refactor error paths and logging in gpio-nomadik
- use more modern interfaces for getting resources in gpio-rockchip,
gpio-bt8xx and gpio-pca9570
- add missing MODULE_DEVICE_TABLE() to gpio-sifive and gpio-vf610
- drop unused FILONOFF macro from gpio-rcar
- extend build coverage of ioport GPIO drivers with COMPILE_TEST=y
- only enable the gpio-rtd driver by default with ARCH_REALTEK=y to
avoid bloating the build
- refactor coding style in several drivers
- use correct endianess translation in gpio-pcf85x
- add wake-up interrupt support to gpio-mvebu
- apply initial value in direction output setter in gpio-by-pinctrl
Misc:
- replace linux/gpio.h inclusions treewide with linux/gpio/legacy.h
which now exports all the deprecated APIs
- select GPIOLIB_LEGACY in Kconfig where required treewide
- use software nodes for gpio-keys in MFD drivers
Devicetree bindings:
- describe the realtek rtd1625 GPIO controller
- document new models for gpio-pca95xx and gpio-cadence
- document new property in gpio-rockchip"
* tag 'gpio-updates-for-v7.3-rc1-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (61 commits)
gpio: gpio-by-pinctrl: Apply initial value in direction output wrapper
dt-bindings: gpio: rockchip,gpio-bank: Add rockchip,grf property
gpio: Use IRQ trigger mask helpers
gpio: allow COMPILE_TEST for IOPORT drivers
gpio: realtek: Add driver for Realtek DHC RTD1625 SoC
gpio: regmap: Add IRQ enable/disable helpers
gpio: regmap: Add set_config callback
gpio: regmap: Add value_xlate callback
gpio: regmap: Add gpio_regmap_operation to extend reg_mask_xlate callback
gpio: regmap: Order kernel-doc descriptions with the actual appearance
gpio: regmap: Apply default resource callbacks for regmap IRQ chip
gpio: regmap: Provide default IRQ resource request and release callbacks
Revert "gpio: realtek: Add driver for Realtek DHC RTD1625 SoC"
gpib: gpio: replace linux/gpio.h inclusion
Input: matrix_keyboard - replace linux/gpio.h inclusion
phy: replace linux/gpio.h inclusions
pcmcia: replace linux/gpio.h inclusions
ASoC: replace linux/gpio.h inclusions
mfd: replace linux/gpio.h inclusions
sh: replace linux/gpio.h inclusions
...
- Fixes for information leaks and OOB accesses across several drivers,
including evdev, focaltech, edt-ft5x06, iforce, and cs40l50-vibra
- Improvements to the synaptics-rmi4 driver to properly handle F54
worker errors and prevent buffer overflows
- Input validation fixes in the hynitron_cstxxx touchscreen driver to
prevent issues with invalid finger IDs and touch counts
- Fixes for use-after-free and initialization bugs in the byd mouse
and psxpad-spi drivers
- New quirks for the atkbd driver to make keyboard work on HONOR and
Xiaomi laptops
- Support for the ZENAIM LEVERLESS controller in the xpad driver.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCana8zQAKCRBAj56VGEWX
nAIMAQCFKhBk3M4Q+625XmMMcb9AV+Bl0TTCxXBbdrA8bYJ+IQEA0C9AQXCmIGzC
lwr7jlgTET8vN/NrEVD+WN9jNzFmZgA=
=jcbm
-----END PGP SIGNATURE-----
Merge tag 'input-for-v7.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- Fixes for information leaks and OOB accesses across several drivers,
including evdev, focaltech, edt-ft5x06, iforce, and cs40l50-vibra
- Improvements to the synaptics-rmi4 driver to properly handle F54
worker errors and prevent buffer overflows
- Input validation fixes in the hynitron_cstxxx touchscreen driver to
prevent issues with invalid finger IDs and touch counts
- Fixes for use-after-free and initialization bugs in the byd mouse and
psxpad-spi drivers
- New quirks for the atkbd driver to make keyboard work on HONOR and
Xiaomi laptops
- Support for the ZENAIM LEVERLESS controller in the xpad driver.
* tag 'input-for-v7.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: evdev - sanitize event type index when fetching event masks
Input: synaptics-rmi4 - propagate F54 worker errors to V4L2 queue
Input: synaptics-rmi4 - block s_input when F54 queue is busy
Input: synaptics-rmi4 - bound the F54 report size to the allocated buffer
Input: synaptics-rmi4 - zero report size on F54 work error
Input: synaptics-rmi4 - fix F55 transmitter electrode count typo
Input: hynitron_cstxxx - validate touch count and finger IDs
Input: evdev - fix information leak in evdev_pass_values()
fixp-arith: convert comments to kernel-doc format
Input: focaltech - fix array out-of-bounds in focaltech_process_rel_packet
Input: atkbd - skip deactivate for HONOR ZQC-P
Input: atkbd - skip deactivate for Xiaomi Book Pro 14's internal keyboard
Input: iforce - validate input packet lengths
Input: psxpad-spi - set driver data before use
Input: cs40l50-vibra - validate custom data from user space
Input: xpad - add support for ZENAIM LEVERLESS
Input: edt-ft5x06 - ignore contacts with an out-of-range slot id
Input: byd - synchronize timer deletion before freeing private data
Instead of hardcoding PA-RISC specific keycode tables into atkbd via
compile-time inclusion, have the gscps2 PS/2 port driver attach a
linux,keymap software node device property to the serio device when
a keyboard port is registered. This allows atkbd to dynamically fetch
and apply the custom keymap when probing the port using generic
firmware property helpers, removing architecture-specific hacks from
generic keyboard driver code.
Co-locate the keymap definitions with the serio port driver by moving
hpps2atkbd.h from drivers/input/keyboard/ to drivers/input/serio/.
To handle the five conflicting keys on RDI PrecisionBook laptops without
runtime model string checks or duplicate keymap tables in memory, add
CONFIG_SERIO_GSCPS2_RDI_KEYCODES to drivers/input/serio/Kconfig and
resolve the conflicting keycodes at compile time via preprocessor
macros.
Link: https://patch.msgid.link/am_9BvmZu9g4RlUM@google.com
Acked-by: Helge Deller <deller@gmx.de>
Tested-by: Helge Deller <deller@gmx.de>
Assisted-by: Antigravity:gemini-3.5-flash
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Both branches of the check return the same value, so the check has no
effect. Remove it and return the value directly.
This is the result of running the Coccinelle script from
scripts/coccinelle/misc/cond_return_no_effect.cocci.
Signed-off-by: Sang-Heon Jeon <ekffu200098@gmail.com>
Link: https://patch.msgid.link/20260729171001.260698-2-ekffu200098@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Simplify the driver by using the block-scope guard(pm_runtime_active)
instead of manually invoking pm_runtime_get_sync() and
pm_runtime_put().
Assisted-by: Antigravity:gemini-3.5-flash
Link: https://patch.msgid.link/20260713-samsung-kp-irq-v2-3-acc84b6daf9a@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The driver requests the interrupt during probe, which by default enables
it. If the bootloader left the keypad interrupts enabled, or if a
spurious interrupt fires early before the driver is fully initialized
and clocks are enabled, the interrupt handler will attempt to read
registers and may cause a synchronous external abort.
Fix this by requesting the interrupt with IRQF_NO_AUTOEN, keeping it
disabled during probe. Enable the interrupt in samsung_keypad_start()
when the device is opened and ready, and disable it in
samsung_keypad_stop() when the device is closed. Remove the redundant
re-enabling of the interrupt at the end of samsung_keypad_stop().
Additionally, manually clear the pending interrupt status during system
resume when the device is closed to avoid immediate resume.
Fixes: 0fffed27f9 ("Input: samsung-keypad - Add samsung keypad driver")
Assisted-by: Antigravity:gemini-3.1-pro
Link: https://patch.msgid.link/20260713-samsung-kp-irq-v2-2-acc84b6daf9a@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
When checking if the device can wake the system, we should pull the
device_may_wakeup() check to the caller instead of repeating it inside
the toggle_wakeup() handler. Furthermore, when configuring the wakeup,
we should safely ensure we write to the registers in the correct order:
configure the interrupt receiver before enabling the peripheral's wake
functionality, and vice-versa.
Assisted-by: Antigravity:gemini-3.1-pro
Link: https://patch.msgid.link/20260713-samsung-kp-irq-v2-1-acc84b6daf9a@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The internal keyboard on the HONOR ZQC-P (HONOR MagicBook Pro 14 2026)
does not work after boot.
Using the kernel command line 'i8042.dumbkbd=1' makes the keyboard
functional, but the CapsLock LED does not work. Adding the
'atkbd_deactivate_fixup' quirk fixes the keyboard and CapsLock LED
natively without requiring boot parameters.
DMI: HONOR ZQC-P/ZQC-P-PCB, BIOS 1.09 03/19/2026
Fixes: 9cf6e24c9f ("Input: atkbd - do not skip atkbd_deactivate() when skipping ATKBD_CMD_GETID")
Signed-off-by: Donglin Lyu <donglin_lyu@outlook.com>
Tested-by: Ruslan Shevchenko <adefka@gmail.com>
Link: https://patch.msgid.link/20260801151115.52709-1-donglin_lyu@outlook.com
Cc: stable@vger.kernel.org
[dtor: keep all HONOR entries together]
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The internal keyboard of the Xiaomi Book Pro 14 does not work unless
atkbd skips deactivating it at the end of atkbd_probe().
Using 'i8042.dumbkbd=1' also makes the keyboard work, but then the driver
never writes to the keyboard at all, so the Caps Lock LED is lost. The
atkbd_deactivate_fixup quirk fixes both without a boot parameter.
DMI: XIAOMI Xiaomi Book Pro 14/TM2424, BIOS XMAPT4B0P0909 05/06/2026
Signed-off-by: Zhefu Zhang <a723356@gmail.com>
Reviewed-by: Andrew Zhou <zhoulol888@gmail.com>
Link: https://patch.msgid.link/20260802031559.19701-1-a723356@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
These are the remaining patches for legacy gpio interface
cleanup, ensuring that files referencing them are sure to
have CONFIG_GPIOLIB_LEGACY set, and use linux/gpio/legacy.h
instead of the old linux/gpio.h header.
There are a few more patches already merged in other
branches for 7.3, including soc, led, net and media. Once
everything is in, we can apply the final patches to turn
off CONFIG_GPIOLIB_LEGACY by default and remove the obsolete
header file.
This branch is based on the immutable ib-mfd-legacy-gpio-7.3
branch from mfd.git to avoid a conflict in the rohm drivers.
-----BEGIN PGP SIGNATURE-----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=Ybrr
-----END PGP SIGNATURE-----
Merge tag 'config-gpio-legacy-for-7.3' of https://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground into gpio/for-next
gpio: legacy interface cleanups for 7.3
These are the remaining patches for legacy gpio interface
cleanup, ensuring that files referencing them are sure to
have CONFIG_GPIOLIB_LEGACY set, and use linux/gpio/legacy.h
instead of the old linux/gpio.h header.
There are a few more patches already merged in other
branches for 7.3, including soc, led, net and media. Once
everything is in, we can apply the final patches to turn
off CONFIG_GPIOLIB_LEGACY by default and remove the obsolete
header file.
This branch is based on the immutable ib-mfd-legacy-gpio-7.3
branch from mfd.git to avoid a conflict in the rohm drivers.
charlieplex_keypad_scan_line() currently ignores the return value of
gpiod_direction_output() when setting the active output line for scanning.
If setting the GPIO direction fails (e.g. on I2C/SPI GPIO expanders or
hardware errors), the function continues to sleep and read input values
from an improperly configured GPIO line.
Fix this by capturing the return value of gpiod_direction_output() and
returning the error code immediately if it fails.
Fixes: 2ca45e57ea ("Input: charlieplex_keypad - add GPIO charlieplex keypad")
Signed-off-by: Surendra Singh Chouhan <kr494167@gmail.com>
Link: https://patch.msgid.link/20260723022943.9337-1-kr494167@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
linux/gpio.h is going away, so remove that since the driver already
includes linux/gpio/consumer.h.
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The driver implements debounce protection using a timer-based mechanism:
when a key interrupt occurs, a timer is scheduled to verify the key state
after DEBOUNCE_TIME before reporting the event. This works well during
normal operation.
However, key press events can be lost during system resume on platforms
like i.MX8MQ-EVK because:
1. During the no_irq resume phase, PCIe driver restoration can take up to
200ms with IRQs disabled.
2. The power key interrupt remains pending during the no_irq phase.
3. If the key is released before IRQs are re-enabled, the timer eventually
runs but sees the key as released and skips reporting the event.
To prevent event loss during system suspend, set a pending_press flag in
the interrupt handler and report the press event from the timer callback
when the flag is set. This avoids out-of-order event delivery and keeps
the existing timer-based debounce mechanism for normal operation.
Signed-off-by: Joy Zou <joy.zou@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260715-b4-pwrkey-v5-4-07e7353c319e@oss.nxp.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Use local struct device pointer to avoid reference the platform_device
pointer every time.
No functional change.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Joy Zou <joy.zou@nxp.com>
Link: https://patch.msgid.link/20260715-b4-pwrkey-v5-3-07e7353c319e@oss.nxp.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Hardcoding -EINVAL discards the actual error code, which breaks probe
deferral (-EPROBE_DEFER) and loses critical diagnostic information
needed for proper kernel error handling.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Joy Zou <joy.zou@nxp.com>
Link: https://patch.msgid.link/20260715-b4-pwrkey-v5-2-07e7353c319e@oss.nxp.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Add dev_err_probe() at return path of probe() to support users to
identify issues easier.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Joy Zou <joy.zou@nxp.com>
Link: https://patch.msgid.link/20260715-b4-pwrkey-v5-1-07e7353c319e@oss.nxp.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The driver currently sets only the overflow interrupt enable bit
(OVR_FLOW_IEN) in the configuration register, leaving the overflow
mode bit (OVR_FLOW_M) at its default value of 0.
According to the TCA8418 datasheet (SCPS215G, Section 8.6.4.1
"Overflow Errata - Description"), both OVR_FLOW_M (Bit_5) and
OVR_FLOW_IEN (Bit_3) must be set high for the overflow interrupt
to be generated. If only OVR_FLOW_IEN is set, FIFO overflow events
are silently lost without notifying the host.
Fix this by setting OVR_FLOW_M alongside OVR_FLOW_IEN in the
configuration register.
Signed-off-by: Zhian Liang <liangzhan5dev@gmail.com>
Link: https://patch.msgid.link/20260529013900.43854-1-liangzhan5dev@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmpUBDceHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGgyoH/ivB80eG0N5qxekB
0w6Xwa5EXEcZrWOXFgYs+ur2D+KMIy8c1Q540ysYmu9OGjZjL+rtNE/czWsBtD57
9gv4Cxs1Ak+V3pfxXdwjeXzGZwtL0ysAmfbQAo5LeYbcwEmjCm26giU5pYlwqTf5
oggkS13GuDEtF/+2bTUFbBVPTMFd6xgZFAOLJkZrfNm3bGOWtqJRDVweVz0IR5Bv
ZVq1WvgrTpsf34ORrYXqyDtxIBxBRM9Dz5O2H5srOnG9yGtk691j1Ud6u8oftDBx
w0UYd1WQDaKYRM/A/mVGHgvwuk5dOThdN5IBXq6R9JC4QgBqFOk0srmJ6JtMWGw7
q8B/WiE=
=IBMl
-----END PGP SIGNATURE-----
Merge tag 'v7.2-rc3' into next
Sync up with mainline to pull in stable fixes to avoid merge conflicts.
- A fix for MELFAS MMS114 touchscreen driver to reject invalid touch IDs
and avoid multi-touch slot corruption
- A fix for a crash in Sega Dreamcast (Maple) mouse driver when opening
the device, caused by missing driver data
- Fixes for Maple drivers (keyboard, mouse, joystick) to properly order
setting driver data and device registration to avoid races.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCalLC2QAKCRBAj56VGEWX
nLLwAQDExlB/cWm2Hpmim13SIetpNbnRNDDUBXZqlx26U6tCUgD9Ek85LvbRiWOJ
dTqs7ieSn2iPQxHFvHOAZD5ohSGj/wI=
=g2px
-----END PGP SIGNATURE-----
Merge tag 'input-for-v7.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- fix MELFAS MMS114 touchscreen driver to reject invalid touch IDs and
avoid multi-touch slot corruption
- fix a crash in the Sega Dreamcast (Maple) mouse driver when opening
the device, caused by missing driver data
- fixes for Maple drivers (keyboard, mouse, joystick) to properly order
setting driver data and device registration to avoid races
* tag 'input-for-v7.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: mms114 - fix multi-touch slot corruption
Input: maple_keyb - set driver data before registering input device
Input: maplecontrol - set driver data before registering input device
Input: maplemouse - set driver data before registering input device
Input: maplemouse - fix NULL pointer dereference in open()
linux/gpio.h is going away, so remove that since the driver already
includes linux/gpio/consumer.h.
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260710211954.1373336-10-arnd@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Set maple driver data before calling input_register_device() to
ensure that it is available if the device is opened immediately and
the callback is triggered.
Cc: stable@vger.kernel.org
Assisted-by: Antigravity:gemini-3.5-flash
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Replace the #include of <linux/mod_devicetable.h> by the more specific
<linux/device-id/*.h> where applicable. For most cases the include
can be dropped completely, only a few drivers need one or two headers
added.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/1a3f2007c5c5dcf555c09a4035ce3ae8ef1b6c49.1782808461.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
CAP1114 is a 14-channel capacitive touch sensor with 11 LED outputs
and hardware reset support.
The CAP1114 uses two control registers for LED output management and
requires two button status registers for touch input state reporting.
By default, channels CS8~CS14 operate as a single grouped block.
Set the corresponding register enable bit to enable these channels as
independent touch inputs. Note these channels share the input threshold
of the eighth entry, causing num_sensor_thresholds to differ from
num_channels.
Signed-off-by: Jun Yan <jerrysteve1101@gmail.com>
Link: https://patch.msgid.link/20260617150318.753148-11-jerrysteve1101@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Check of_property_present() before parsing microchip,calib-sensitivity
and microchip,signal-guard, so that models which do not support these
properties (e.g. CAP1114) skip the parsing entirely.
This prevents a potential buffer overflow in calib_sensitivities[8] and
signal_guard_inputs_mask when a model with more than 8 channels
(CAP1114 has 14) would otherwise call of_property_read_u32_array()
with num_channels as the element count.
Signed-off-by: Jun Yan <jerrysteve1101@gmail.com>
Link: https://patch.msgid.link/20260617150318.753148-9-jerrysteve1101@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Extend cap11xx_hw_model structure to support CAP1114 with
different register offsets and hardware characteristics:
- led_output_control_reg_base: different address on CAP1114
- sensor_input_reg_base: different address on CAP1114
- num_sensor_thresholds: separate value from num_channels for CAP1114
- has_repeat_en: repeat enable support, disabled by default on CAP1114
Include linux/bits.h, update the register operations related to LEDs.
Signed-off-by: Jun Yan <jerrysteve1101@gmail.com>
Link: https://patch.msgid.link/20260617150318.753148-8-jerrysteve1101@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Some CAP11xx devices (CAP1126/CAP1188) have a dedicated RESET pin.
Add hardware reset operation to improve device reliability and
ensure proper initialization on probe.
Signed-off-by: Jun Yan <jerrysteve1101@gmail.com>
Link: https://patch.msgid.link/20260617150318.753148-7-jerrysteve1101@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Remove unused register address macros and their corresponding
definitions in the cap11xx_reg_defaults array.
This cleanup reduces code clutter and makes the driver easier to
maintain without affecting functionality.
Signed-off-by: Jun Yan <jerrysteve1101@gmail.com>
Link: https://patch.msgid.link/20260617150318.753148-3-jerrysteve1101@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Duplicated device detection log exists at line 537 and line 542,
which brings redundant kernel print messages. Drop one redundant
log entry to clean up dmesg output.
Meanwhile add missing error logs when I2C communication fails
during driver probe(), helping debug.
Signed-off-by: Jun Yan <jerrysteve1101@gmail.com>
Link: https://patch.msgid.link/20260617150318.753148-2-jerrysteve1101@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The driver accesses the message payload (msg[0]) without checking if
the length is greater than zero. The parent MFD driver can produce a
payload with a length of 0, in which case msg[0] would be uninitialized
or stale.
Add a check to return early if len is less than 1.
Reported-by: sashiko-bot@kernel.org
Assisted-by: Antigravity:gemini-3.5-flash
Link: https://patch.msgid.link/aintAvTyw4CVb5hG@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The driver acquires the micro->lock spinlock in process context (in
micro_key_start() and micro_key_stop()) without disabling interrupts.
However, this lock is also acquired in hardirq context by the MFD core
rx handler (micro_rx_msg()) which is called from the serial ISR.
This can lead to a lock inversion deadlock if the interrupt fires on the
same CPU while the process context holds the lock.
Fix this by using guard(spinlock_irq) instead of guard(spinlock) in
micro_key_start() and micro_key_stop() to disable interrupts while
holding the lock.
Reported-by: sashiko-bot@kernel.org
Assisted-by: Antigravity:gemini-3.5-flash
Link: https://patch.msgid.link/aij-pfaKK-Nna7wf@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The Lenovo Yoga Air 14 (83QK) laptop keyboard becomes unresponsive
after the standard atkbd init sequence. Controlled testing on the
actual hardware shows the F5 (ATKBD_CMD_RESET_DIS / deactivate)
command specifically corrupts the EC state, causing zero IRQ1
interrupts after init.
Skipping only the deactivate command (while keeping F4 ENABLE)
resolves the issue completely: both keystroke input and CapsLock
LED toggle work correctly. The reverse test - skipping only F4
while keeping F5 - makes the problem worse (zero keystroke
interrupts), confirming F5 is the sole culprit.
Add a DMI quirk entry for LENOVO/83QK using the existing
atkbd_deactivate_fixup callback, consistent with the existing
entries for LG Electronics and HONOR FMB-P that address the
same EC F5 deactivate issue.
Signed-off-by: Zeyu WANG <zeyu.thomas.wang@gmail.com>
Link: https://patch.msgid.link/20260602170909.14725-1-zeyu.thomas.wang@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.
The mentioned robustness is relevant for a planned change to struct
i2c_device_id that replaces .driver_data by an anonymous union.
This patch doesn't modify the compiled arrays, only their representation
in source form benefits. The former was confirmed with x86 and arm64
builds.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20260515164848.497608-2-u.kleine-koenig@baylibre.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Add support for GPIO-based charlieplex keypad, allowing to control
N^2-N keys using N GPIO lines.
Reuse matrix keypad keymap to simplify, even if there is no concept
of rows and columns in this type of keyboard.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Link: https://patch.msgid.link/20260312180304.3865850-5-hugo@hugovil.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Inline the i2c_check_functionality() check, since the function returns a
boolean status rather than an error code.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20260408141926.1181389-4-thorsten.blum@linux.dev
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Inline the i2c_check_functionality() check, since the function returns a
boolean status rather than an error code.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20260408141926.1181389-3-thorsten.blum@linux.dev
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmmuDMYeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGLO4IAJ5kpRUi1STiqseb
bLawF3gehuZp8VPAYnJsACYXN7kMx9OQJ2SE4Y0Y16ZlHtS1TTvsEAhwSTyYH7Jc
hb1iSfoN1kxgDh2U3yZZJz9+DzQh6/YCDXJjyhpSgWOejhaYe7r7er5xqdKpGgVx
6hlvN92/c1m7aqMjKNXeD7YKoXn35FzwPYQAyksJdwMWbq27HE1Vb42PHht21yUX
1ndEUw0UMYH3IrDON+7QtE/aXW1PlLLeQWPDpG9y5FhoseZFEcNkm5NVYshuZ8L4
WZj3Q5IvQ/zj9DuwagW4Gab9XwzKIWSXuuSLRyQzv+OcAyITiC+Uo3z55TFmvXs7
2DOHBkY=
=depW
-----END PGP SIGNATURE-----
Merge tag 'v7.0-rc3' into next
Sync up with the mainline to brig up the latest changes, specifically
changes to ALPS driver.
The driver currently calls device_init_wakeup() and manually toggles
IRQ wake in suspend and resume paths. This is unnecessary since the
I2C core already handles wakeup configuration when the device is
described in Device Tree with the "wakeup-source" property.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Link: https://patch.msgid.link/20260309071413.92709-1-phucduc.bui@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Instead of using "unsigned short" and "unsigned char" for holding 16-bit
and 8-bit data, switch to using common in kernel u16 and u8.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Annotating the temporary keymap pointer as __free(kfree) ensures that it
will get released when exiting the function and explicit freeing in all
the return paths can be removed.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The SCANCODE() macro extracts a 16-bit value (0..65535) from firmware
device property data, but atkbd_get_keymap_from_fwnode() uses it
directly to index atkbd->keycode[], which only has ATKBD_KEYMAP_SIZE
(512) elements. A firmware-supplied scancode >= 512 causes a heap
out-of-bounds write that can corrupt adjacent struct atkbd fields and
neighboring slab objects.
Add a bounds check that rejects the entire firmware keymap if any entry
contains an out-of-range scancode, consistent with the validation
performed by matrix_keypad_parse_keymap() in drivers/input/matrix-keymap.c
for the same "linux,keymap" property format. When rejected, the driver
falls back to the default keycode table.
Fixes: 9d17ad2369 ("Input: atkbd - receive and use physcode->keycode mapping from FW")
Signed-off-by: Ariel Silver <arielsilver77@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
