There may be a potential integer overflow issue in
_dpu_core_perf_calc_clk(). crtc_clk is defined as u64, while
mode->vtotal, mode->hdisplay, and drm_mode_vrefresh(mode) are defined as
a smaller data type. The result of the calculation will be limited to
"int" in this case without correct casting. In screen with high
resolution and high refresh rate, integer overflow may happen.
So, we recommend adding an extra cast to prevent potential
integer overflow.
Fixes: c33b7c0389 ("drm/msm/dpu: add support for clk and bw scaling for display")
Signed-off-by: Zichen Xie <zichenxie0106@gmail.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/622206/
Link: https://lore.kernel.org/r/20241029194209.23684-1-zichenxie0106@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
For historical reasons a lot of symbols in the MSM DisplayPort driver
used the generic dp_ prefix. Perform a mass-rename of those symbols to
use msm_dp prefix.
Basically this is a result of the following script:
sed drivers/gpu/drm/msm/dp/* -i -e 's/\<dp_/msm_dp_/g'
sed drivers/gpu/drm/msm/dp/* -i -e 's/"msm_dp_/"dp_/g'
sed drivers/gpu/drm/msm/dp/* -i -e 's/msm_\(dp_sdp_header\|dp_sdp\)\>/\1/g'
Yes, this also results in renaming of several struct fields in addition
to renaming the structs and functions, but I think the simple solution
is better than the more complex one.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202410250305.UHKDhtxy-lkp@intel.com/
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/622211/
Link: https://lore.kernel.org/r/20241029-msm-dp-rename-v2-1-13c5c03fad44@linaro.org
Function drm_gem_shmem_create_with_mnt() creates an object
without using the mountpoint if gemfs is NULL.
Drop the else branch calling drm_gem_shmem_create().
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241029-v3d-v2-1-c0d3dd328d1b@gmail.com
drm_kms_helper_poll_init needs to be called after zynqmp_dpsub_kms_init.
zynqmp_dpsub_kms_init creates the connector and without it we don't
enable hotplug detection.
Fixes: eb2d64bfcc ("drm: xlnx: zynqmp_dpsub: Report HPD through the bridge")
Cc: stable@vger.kernel.org
Signed-off-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241028134218.54727-1-lists@steffen.cc
layer->info can be null if we have an error on the first layer in
zynqmp_disp_create_layers
Fixes: 1836fd5ed9 ("drm: xlnx: zynqmp_dpsub: Minimize usage of global flag")
Signed-off-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241028133941.54264-1-lists@steffen.cc
Add a debugfs interface for exercising the various test modes supported
by the DisplayPort controller. This allows performing compliance
testing, or performing signal integrity measurements on a failing link.
At the moment, we do not support sink-driven link quality testing,
although such support would be fairly easy to add.
Additionally, add some debugfs files for ignoring AUX errors and HPD
events, as this can allow testing with equipment that cannot emulate a
DPRX.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
[Tomi: fixed a few minor formatting issues]
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240809193600.3360015-9-sean.anderson@linux.dev
Add a non-locking version of zynqmp_dp_bridge_detect and use it in
zynqmp_dp_hpd_work_func so we can take the lock explicitly. This will
make it easier to check for hpd_ignore when we add debugfs support.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240809193600.3360015-8-sean.anderson@linux.dev
In preparation for supporting compliance testing, split off several
helper functions. No functional change intended.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240809193600.3360015-7-sean.anderson@linux.dev
Now that all of the sleeping work is done outside of the IRQ, we can
convert it to a hard IRQ. Shared IRQs may be triggered even after
calling disable_irq, so use free_irq instead which removes our callback
altogether.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240809193600.3360015-5-sean.anderson@linux.dev
Retraining the link can take a while, and might involve waiting for
DPCD reads/writes to complete. In preparation for unthreading the IRQ
handler, move this into its own work function.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240809193600.3360015-4-sean.anderson@linux.dev
Add some locking to prevent the IRQ/workers/bridge API calls from stepping
on each other's toes. This lock protects:
- Non-atomic registers configuring the link. That is, everything but the
IRQ registers (since these are accessed in an atomic fashion), and the DP
AUX registers (since these don't affect the link). We also access AUX
while holding this lock, so it would be very tricky to support.
- Link configuration. This is effectively everything in zynqmp_dp which
isn't read-only after probe time. So from next_bridge onward.
This lock is designed to protect configuration changes so we don't have to
do anything tricky. Configuration should never be in the hot path, so I'm
not worried about performance.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240809193600.3360015-3-sean.anderson@linux.dev
When the call to gf100_grctx_generate() fails, unlock gr->fecs.mutex
before returning the error.
Fixes smatch warning:
drivers/gpu/drm/nouveau/nvkm/engine/gr/gf100.c:480 gf100_gr_chan_new() warn: inconsistent returns '&gr->fecs.mutex'.
Fixes: ca081fff6e ("drm/nouveau/gr/gf100-: generate golden context during first object alloc")
Signed-off-by: Li Huafei <lihuafei1@huawei.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241026173844.2392679-1-lihuafei1@huawei.com
Add job that executes the IGT test suite for sm8350-hdk.
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Vignesh Raman <vignesh.raman@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241022094509.85510-3-vignesh.raman@collabora.com
Add job that executes the IGT test suite for acer-cb317-1h-c3z6-dedede.
dedede boards use 64 bit Intel Jasper Lake processors.
Signed-off-by: Vignesh Raman <vignesh.raman@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241022094509.85510-2-vignesh.raman@collabora.com
Clang-19 and above sometimes end up with multiple copies of the large
a6xx_hfi_msg_bw_table structure on the stack. The problem is that
a6xx_hfi_send_bw_table() calls a number of device specific functions to
fill the structure, but these create another copy of the structure on
the stack which gets copied to the first.
If the functions get inlined, that busts the warning limit:
drivers/gpu/drm/msm/adreno/a6xx_hfi.c:631:12: error: stack frame size (1032) exceeds limit (1024) in 'a6xx_hfi_send_bw_table' [-Werror,-Wframe-larger-than]
Fix this by kmalloc-ating struct a6xx_hfi_msg_bw_table instead of using
the stack. Also, use this opportunity to skip re-initializing this table
to optimize gpu wake up latency.
Cc: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/621814/
Signed-off-by: Rob Clark <robdclark@chromium.org>
The driver configures mostly Pixel PLL from the clock cached in
local copy of the mode. Make sure the driver uses adjusted mode
which contains the updated Pixel PLL settings negotiated in
tc_dpi_atomic_check()/tc_edp_atomic_check().
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241026041057.247640-1-marex@denx.de
dispc_enable_fifomerge() last use was removed by 2012's
commit 85099f11bd ("Revert "OMAPDSS: APPLY: add fifo merge support
funcs"")
dispc_has_writeback(), dispc_wb_get_framedone_irq(), dispc_wb_go(),
dispc_wb_go_busy() and dispc_wb_setup() were changed from statics
to public symbols and unwired from a structure by 2020's
commit dac62bcafe ("drm/omap: remove dispc_ops")
but didn't have any users.
dispc_mgr_get_clock_div() got renamed from dispc_get_clock_div()
and it's last use was removed in 2011 by commit
42c9dee821 ("OMAP: DSS2: Remove FB_OMAP_BOOTLOADER_INIT support")
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241026220010.93773-1-linux@treblig.org
There is a need to check the returned value of the registration function.
In case of returned error, print that and stop the init process.
Fixes: 7c0ffcd40b ("drm/msm/gpu: Respect PM QoS constraints")
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Patchwork: https://patchwork.freedesktop.org/patch/620336/
Signed-off-by: Rob Clark <robdclark@chromium.org>
disable_irq() after request_irq() still has a time gap in which
interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will
disable IRQ auto-enable when request IRQ.
Fixes: 4b565ca5a2 ("drm/msm: Add A6XX device support")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Patchwork: https://patchwork.freedesktop.org/patch/614075/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Fixed some spelling errors, the details are as follows:
-in the code comments:
collpase->collapse
firwmare->firmware
everwhere->everywhere
Fixes: 2401a00846 ("drm/msm: gpu: Add support for the GPMU")
Fixes: 5a903a44a9 ("drm/msm/a6xx: Introduce GMU wrapper support")
Fixes: f97decac5f ("drm/msm: Support multiple ringbuffers")
Signed-off-by: Shen Lichuan <shenlichuan@vivo.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/614109/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Add support for Adreno 663 found on sa8775p based platforms.
Signed-off-by: Puranam V G Tejaswi <quic_pvgtejas@quicinc.com>
Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/620768/
Signed-off-by: Rob Clark <robdclark@chromium.org>
The ternary operator never returns -1 as `ring` will never be NULL.
Thus, the ternary operator is not needed.
Fix this by removing the ternary operation and only including the
value it will return when the `ring` is not NULL.
This was reported by Coverity Scan.
https://scan7.scan.coverity.com/#/project-view/51525/11354?selectedIssue=1600286
Fixes: 35d36dc169 ("drm/msm/a6xx: Add traces for preemption")
Signed-off-by: Everest K.C. <everestkc@everestkc.com.np>
Patchwork: https://patchwork.freedesktop.org/patch/619349/
Signed-off-by: Rob Clark <robdclark@chromium.org>
The msm_disp_state_dump_regs():
- Doesn't allocate if the caller already allocated. ...but there's one
caller and it doesn't allocate so we don't need this check.
- Checks for allocation failure over and over even though it could
just do it once right after the allocation.
Clean this up.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/619660/
Link: https://lore.kernel.org/r/20241014093605.3.I66049c2c17bd82767661f0ecd741b20453da02b2@changeid
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
drm_sched_job_init()'s name suggests that after the function succeeded,
parameter "job" will be fully initialized. This is not the case; some
members are only later set, notably drm_sched_job.sched by
drm_sched_job_arm().
Document that drm_sched_job_init() does not set all struct members.
Document the lifetime of drm_sched_job.sched.
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241023141530.113370-2-pstanner@redhat.com
Allow imx/dcss to be built with COMPILE_TEST=y for greater
coverage. Builds fine on x86/x86_64 at least.
Cc: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241003111851.10453-8-ville.syrjala@linux.intel.com
Reviewed-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Use the appropriate 64bit division helpers to make the code
build on 32bit architectures.
Cc: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241003111851.10453-7-ville.syrjala@linux.intel.com
Reviewed-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Set the drm_bridge's ycbcr_420_allowed flag if the YCbCr 420 output is
supported by the hardware.
Cc: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241019-bridge-yuv420-v1-6-d74efac9e4e6@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Instead of forcing the ycbcr_420_allowed flag to be set on the created
drm_connector, set it on the drm_bridge instance and allow
drm_bridge_connecgtor to propagate it to the drm_connector.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241019-bridge-yuv420-v1-5-d74efac9e4e6@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
As both aux bridges are merely passthrough bridges, mark them as
supporting interlaced and YCbCr 420 data. Other bridges in the chain
still might limit interlaced and YCbCr 420 data support on the
corresponding connector.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241019-bridge-yuv420-v1-4-d74efac9e4e6@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Allow YCbCr 420 output for HDMI and DisplayPort connectors. Other
bridges in the chain still might limit YCbCr 420 support on the
corresponding connector.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241019-bridge-yuv420-v1-3-d74efac9e4e6@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Although the interlace_allowed and ycbcr_420_allowed flags are a part of
the struct drm_connector rather than struct drm_connector_state, still
include them into state dump in order to ease debugging of the setup
issues.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241019-bridge-yuv420-v1-2-d74efac9e4e6@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Follow the interlace_allowed example and calculate drm_connector's
ycbcr_420_allowed flag as AND of all drm_bridge's ycbcr_420_allowed
flags in a chain. This is one of the gaps between several
bridge-specific connector implementations and drm_bridge_connector.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241019-bridge-yuv420-v1-1-d74efac9e4e6@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
drm_sched_job_init() has no control over how users allocate struct
drm_sched_job. Unfortunately, the function can also not set some struct
members such as job->sched.
This could theoretically lead to UB by users dereferencing the struct's
pointer members too early.
It is easier to debug such issues if these pointers are initialized to
NULL, so dereferencing them causes a NULL pointer exception.
Accordingly, drm_sched_entity_init() does precisely that and initializes
its struct with memset().
Initialize parameter "job" to 0 in drm_sched_job_init().
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241021105028.19794-2-pstanner@redhat.com
Reviewed-by: Christian König <christian.koenig@amd.com>
Every module should have a description, without this we get a
build time warning.
Fixes: cc3e8a216d ("drm/imx: add internal bridge handling display-timings DT node")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241015073004.4066457-2-arnd@kernel.org
The driver now uses the legacy bridge helper code but can be configured
to get built without it:
ERROR: modpost: "devm_imx_drm_legacy_bridge" [drivers/gpu/drm/imx/ipuv3/parallel-display.ko] undefined!
Add the required dependency, same as in the ldb driver.
Fixes: f94b9707a1 ("drm/imx: parallel-display: switch to imx_legacy_bridge / drm_bridge_connector")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241015073004.4066457-1-arnd@kernel.org
The drm_fb_helper_deferred_io() uses struct fb_deferred_io_pageref,
which isn't available without CONFIG_FB_DEFERRED_IO. Put the function
under corresponding #ifdef to fix build failure if deferred I/O isn't
enabled.
Fixes: 8058944f52 ("drm/fbdev: Select fbdev I/O helpers from modules that require them")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20241021-fix-drm-deferred-v2-1-db1de4c6b042@linaro.org