Commit graph

360,964 commits

Author SHA1 Message Date
Trond Myklebust
2b2fa71723 NFSv4.1: Simplify struct nfs4_sequence_args too
Replace the session pointer + slotid with a pointer to the
allocated slot.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-11-26 17:49:52 -05:00
Trond Myklebust
df2fabffba NFSv4.1: Label each entry in the session slot tables with its slot number
Instead of doing slot table pointer gymnastics every time we want to
know which slot we're using.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-11-26 17:49:51 -05:00
Trond Myklebust
e3725ec015 NFSv4.1: Shrink struct nfs4_sequence_res by moving the session pointer
Move the session pointer into the slot table, then have struct nfs4_slot
point to that slot table.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-11-26 17:49:04 -05:00
Sachin Kamat
4401e48737 leds: lp3944: Fix return value
Return the value obtained from i2c_smbus_read_byte_data() instead of
-EINVAL. Silences the following smatch warning:
drivers/leds/leds-lp3944.c:89 lp3944_reg_read() info:
why not propagate 'tmp' from i2c_smbus_read_byte_data() instead of -22?

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
2012-11-26 14:43:55 -08:00
Sachin Kamat
5ebab74a71 leds: lp5523: Fix return value
Return the value obtained from i2c_smbus_read_byte_data() instead of
-EIO. Silences the following smatch warning:
drivers/leds/leds-lp5523.c:174 lp5523_read() info:
why not propagate 'ret' from i2c_smbus_read_byte_data() instead of -5?

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
2012-11-26 14:43:55 -08:00
Sachin Kamat
313e8b50c8 leds: lp5521: Fix return value
Return the value obtained from i2c_smbus_read_byte_data() instead of
-EIO. Silences the following smatch warning:
drivers/leds/leds-lp5521.c:155 lp5521_read() info:
why not propagate 'ret' from i2c_smbus_read_byte_data() instead of -5?

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
2012-11-26 14:43:54 -08:00
Eric Dumazet
b49d3c1e1c net: ipmr: limit MRT_TABLE identifiers
Name of pimreg devices are built from following format :

char name[IFNAMSIZ]; // IFNAMSIZ == 16

sprintf(name, "pimreg%u", mrt->id);

We must therefore limit mrt->id to 9 decimal digits
or risk a buffer overflow and a crash.

Restrict table identifiers in [0 ... 999999999] interval.

Reported-by: Chen Gang <gang.chen@asianux.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-26 17:36:59 -05:00
Joe Perches
03f52a0a55 ip6mr: Add sizeof verification to MRT6_ASSERT and MT6_PIM
Verify the length of the user-space arguments.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-26 17:35:58 -05:00
Jingoo Han
eef4aa652c leds: leds-lp5523: replace strict_strtoul() with kstrtoul()
The usage of strict_strtoul() is not preferred, because
strict_strtoul() is obsolete. Thus, kstrtoul() should be
used.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
2012-11-26 14:28:51 -08:00
Jingoo Han
69b44c1630 leds: leds-lp5521: replace strict_strtoul() with kstrtoul()
The usage of strict_strtoul() is not preferred, because
strict_strtoul() is obsolete. Thus, kstrtoul() should be
used.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
2012-11-26 14:28:51 -08:00
Jingoo Han
057407c732 led: Add dependency on CONFIG_LEDS_TRIGGERS to led_trigger_rename_static()
This patch fixes build warnings when CONFIG_LEDS_TRIGGERS is
disabled as below:
include/linux/leds.h:158:18: warning: 'struct led_trigger' declared inside parameter list [enabled by default]
include/linux/leds.h:158:18: warning: its scope is only this definition or declaration, which is probably not what you want [enabled
by default]

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Fabio Baltieri <fabio.baltieri@gmail.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
2012-11-26 14:28:51 -08:00
Fabio Baltieri
a8df7b1ab7 leds: add led_trigger_rename function
Implements a "led_trigger_rename" function to rename a trigger with
proper locking.

This assumes that led name was originally allocated in non-constant
storage.

Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
Cc: Kurt Van Dijck <kurt.van.dijck@eia.be>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
2012-11-26 14:28:50 -08:00
Axel Lin
5cce0105c8 leds: lm3642: Fix up world writable sysfs files
We don't need these sysfs files to be world writable or group writable.
These files are write-only, change them to S_IWUSR (0200).

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: G.Shark Jeong <gshark.jeong@gmail.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
2012-11-26 14:28:50 -08:00
Axel Lin
5bbf150cca leds: lm355x: Fix up world writable sysfs file
We don't need the sysfs file to be world writable or group writable.
This file is write-only, change it to S_IWUSR (0200).

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: G.Shark Jeong <gshark.jeong@gmail.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
2012-11-26 14:28:49 -08:00
Jingoo Han
3651c4b904 leds: leds-88pm860x: drop devm_kfree of devm_kzalloc'd data
The devm_kfree function allocates memory that is released
when a driver detaches. Thus, there is no reason to explicitly
call devm_kfree in probe or remove functions.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
2012-11-26 14:28:49 -08:00
Jingoo Han
1b21ec5a28 leds: leds-lp5523: fix build warnings
This patch fixes build warnings as below:

drivers/leds/leds-lp5523.c: In function 'lp5523_selftest':
drivers/leds/leds-lp5523.c:496:18: warning: 'adc' may be used uninitialized in this function [-Wuninitialized]
drivers/leds/leds-lp5523.c:471:5: warning: 'vdd' may be used uninitialized in this function [-Wuninitialized]
drivers/leds/leds-lp5523.c: In function 'lp5523_probe':
drivers/leds/leds-lp5523.c:252:9: warning: 'status' may be used uninitialized in this function [-Wuninitialized]
drivers/leds/leds-lp5523.c:201:5: note: 'status' was declared here

If lp5523_read() returns an error, problems will happen. Thus,
when lp5523_read() returns an error, it should be handled.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
2012-11-26 14:28:49 -08:00
Roland Stigge
04553e925b leds: leds-gpio: Defer probing in case of deferred gpio probing
This patch makes leds-gpio's probe() return -EPROBE_DEFER if any of the gpios
to register are deferred themselves. This makes a change of
gpio_leds_create_of()'s return value necessary: Instead of returning NULL on
error, we now use ERR_PTR() error coding.

Signed-off-by: Roland Stigge <stigge@antcom.de>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
2012-11-26 14:28:49 -08:00
Jingoo Han
e8941928fa leds: ledtrig-gpio: replace strict_strtoul() with kstrtoul()
The usage of strict_strtoul() is not preferred, because
strict_strtoul() is obsolete. Thus, kstrtoul() should be
used.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
2012-11-26 14:28:49 -08:00
Jingoo Han
75253b3cff leds: ledtrig-backlight: replace strict_strtoul() with kstrtoul()
The usage of strict_strtoul() is not preferred, because
strict_strtoul() is obsolete. Thus, kstrtoul() should be
used.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
2012-11-26 14:28:48 -08:00
Jingoo Han
d3b6492afa leds: leds-ss4200: replace strict_strtoul() with kstrtoul()
The usage of strict_strtoul() is not preferred, because
strict_strtoul() is obsolete. Thus, kstrtoul() should be
used.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
2012-11-26 14:28:48 -08:00
Jingoo Han
3874350c59 leds: leds-ns2: replace strict_strtoul() with kstrtoul()
The usage of strict_strtoul() is not preferred, because
strict_strtoul() is obsolete. Thus, kstrtoul() should be
used.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
2012-11-26 14:28:48 -08:00
Jingoo Han
7517611a4c leds: leds-netxbig: replace strict_strtoul() with kstrtoul()
The usage of strict_strtoul() is not preferred, because
strict_strtoul() is obsolete. Thus, kstrtoul() should be
used.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
2012-11-26 14:28:47 -08:00
Jingoo Han
fd80fc762c leds: leds-bd2802: replace strict_strtoul() with kstrtoul()
The usage of strict_strtoul() is not preferred, because
strict_strtoul() is obsolete. Thus, kstrtoul() should be
used.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
2012-11-26 14:28:47 -08:00
Jingoo Han
f9e007fffd leds: renesas: use devm_ functions
The devm_ functions allocate memory that is released when a driver
detaches. This makes the code smaller and a bit simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
2012-11-26 14:28:46 -08:00
Jingoo Han
f87ef10105 leds: leds-cobalt-qube: use devm_ioremap
The devm_ functions allocate memory that is released when a driver
detaches. This patch uses devm_ioremap() for these functions.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
2012-11-26 14:28:46 -08:00
Jingoo Han
50e5194385 leds: leds-cobalt-raq: use devm_ioremap
The devm_ functions allocate memory that is released when a driver
detaches. This patch uses devm_ioremap() for these functions.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
2012-11-26 14:28:45 -08:00
Jingoo Han
aa2dcf9dc1 leds: leds-fsg: use devm_ioremap
The devm_ functions allocate memory that is released when a driver
detaches. This patch uses devm_ioremap() for these functions.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
2012-11-26 14:28:45 -08:00
Jingoo Han
b0053aaa23 leds: renesas: use gpio_request_one
Using gpio_request_one can make the code simpler because it can
set the direction and initial value in one shot.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
2012-11-26 14:28:44 -08:00
Jingoo Han
31c3dc7488 leds: leds-ns2: use gpio_request_one
Using gpio_request_one can make the code simpler because it can
set the direction and initial value in one shot.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
2012-11-26 14:28:44 -08:00
Jingoo Han
507d967bc1 leds: leds-lt3593: use gpio_request_one
Using gpio_request_one can make the code simpler because it can
set the direction and initial value in one shot.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
2012-11-26 14:28:43 -08:00
Jingoo Han
a99d76f9eb leds: leds-gpio: use gpio_request_one
Using gpio_request_one can make the code simpler because it can
set the direction and initial value in one shot.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
2012-11-26 14:28:43 -08:00
Axel Lin
14ce82e536 leds: lm355x: Return proper error for lm3556_indicator_pattern_store error path
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: G.Shark Jeong <gshark.jeong@gmail.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
2012-11-26 14:28:42 -08:00
Axel Lin
eccb663856 leds: lm3642: Return proper error in lm3642_[torch|strobe]_pin_store error paths
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: G.Shark Jeong <gshark.jeong@gmail.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
2012-11-26 14:28:42 -08:00
Neal Cardwell
e1a676424c ipv4: avoid passing NULL to inet_putpeer() in icmpv4_xrlim_allow()
inet_getpeer_v4() can return NULL under OOM conditions, and while
inet_peer_xrlim_allow() is OK with a NULL peer, inet_putpeer() will
crash.

This code path now uses the same idiom as the others from:
1d861aa4b3 ("inet: Minimize use of
cached route inetpeer.").

Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-26 17:24:41 -05:00
Brian Haley
c91f6df2db sockopt: Change getsockopt() of SO_BINDTODEVICE to return an interface name
Instead of having the getsockopt() of SO_BINDTODEVICE return an index, which
will then require another call like if_indextoname() to get the actual interface
name, have it return the name directly.

This also matches the existing man page description on socket(7) which mentions
the argument being an interface name.

If the value has not been set, zero is returned and optlen will be set to zero
to indicate there is no interface name present.

Added a seqlock to protect this code path, and dev_ifname(), from someone
changing the device name via dev_change_name().

v2: Added seqlock protection while copying device name.

v3: Fixed word wrap in patch.

Signed-off-by: Brian Haley <brian.haley@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-26 17:22:14 -05:00
Richard Cochran
513777b243 cpts: add missing kconfig dependency
The Common Platform Time Sync function of the CPSW does not depend the
CPSW configuration option as it should. This patch fixes the issue by
adding the dependency.

Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-26 17:22:14 -05:00
Richard Cochran
c3484c275d ptp: reduce stack usage when measuring the system time offset
This patch removes the large buffer from the stack of the system
offset ioctl and replaces it with a kmalloced buffer.

Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-26 17:22:14 -05:00
Richard Cochran
c7ec0badcc ptp: reduce stack usage when reading external time stamps
This patch removes the large buffer from the stack of the read file
operation and replaces it with a kmalloced buffer.

Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-26 17:22:14 -05:00
Giuseppe CAVALLARO
cfd1979e81 stmmac: update the driver version to Nov_2012
Many new feauture have been introduced in the driver:
ethtool coalesce options, Rx HW watchdog... so this patch updates the
driver's version.

Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-26 17:22:13 -05:00
Giuseppe CAVALLARO
f9e01b5565 stmmac: update the doc with new IRQ mitigation
This patch updates the stmmac.txt adding some information
about the new rx/tx mitigation schema adopted in the driver.

Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-26 17:22:12 -05:00
Giuseppe CAVALLARO
48f44da454 stmmac: get/set coalesce parameters via ethtool
This patch is to get/set the tx/rx coalesce parameters
via ethtool interface.

Tests have been done on several platform with different GMAC chips w/o and w/
RX watchdog feature.

V2: reject coalesce settings that are not supported.

Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Reviewed-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-26 17:22:12 -05:00
Giuseppe CAVALLARO
62a2ab935c stmmac: add Rx watchdog support to mitigate the DMA irqs
GMAC devices newer than databook 3.40 has an embedded timer
that can be used for mitigating the number of interrupts.
So this patch adds this optimizations.

At any rate, the Rx watchdog can be disable (on bugged HW) by
passing from the platform the riwt_off field.

In this implementation the rx timer stored in the Reg9 is fixed
to the max value. This will be tuned by using ethtool.

V2: added a platform parameter to force to disable the rx-watchdog
for example on new core where it is bugged.

V3: do not disable NAPI when Rx watchdog is used.

V4: a new extra statistic field has been added to show the early
receive status in the interrupt handler.
This patch also adds an extra check to avoid to call
napi_schedule when the DMA_INTR_ENA_RIE bit is disabled in the
Interrupt Mask register.

Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-26 17:22:12 -05:00
Giuseppe CAVALLARO
9125cdd1be stmmac: add the initial tx coalesce schema
This patch adds a new schema used for mitigating the
number of transmit interrupts.
It is based on a SW timer and a threshold value.
The timer is used to periodically call the stmmac_tx_clean
function; the threshold is used for setting the IC (Interrupt
on Completion bit). The ISR will then invoke the poll method.
Also the patch improves some ethtool stat fields.

V2: review the logic to manage the IC bit in the TDESC
that was bugged because it didn't take care about the
fragments. Also fix the tx_count_frames that has not to be
limited to TX DMA ring. Thanks to Ben Hutchings.

V3: removed the spin_lock irqsave/restore as D. Miller suggested.

Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-26 17:22:10 -05:00
Giuseppe CAVALLARO
7284a3f1ad stmmac: remove dead code for STMMAC_TIMER support
The TIMER option is not longer supported and this
code can be considered dead for this driver in
the new kernel series.
In fact, It was not updated at all and never used.

Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-26 17:22:10 -05:00
Rami Rosen
3872baf618 tun: put correct method name in a debug message.
This patch puts the correct method name, tun_do_read, in a debug message.

Signed-off-by: Rami Rosen <ramirose@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-26 17:22:10 -05:00
Rami Rosen
36fe8c0973 vtun: fix typos.
This patch fixes four typos in drivers/net/vtun.c.

Signed-off-by: Rami Rosen <ramirose@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-26 17:22:09 -05:00
David Woodhouse
ae088d663b atm: br2684: Fix excessive queue bloat
There's really no excuse for an additional wmem_default of buffering
between the netdev queue and the ATM device. Two packets (one in-flight,
and one ready to send) ought to be fine. It's not as if it should take
long to get another from the netdev queue when we need it.

If necessary we can make the queue space configurable later, but I don't
think it's likely to be necessary.

cf. commit 9d02daf754 (pppoatm: Fix
excessive queue bloat) which did something very similar for PPPoATM.

Note that there is a tremendously unlikely race condition which may
result in qspace temporarily going negative. If a CPU running the
br2684_pop() function goes off into the weeds for a long period of time
after incrementing qspace to 1, but before calling netdev_wake_queue()...
and another CPU ends up calling br2684_start_xmit() and *stopping* the
queue again before the first CPU comes back, the netdev queue could
end up being woken when qspace has already reached zero.

An alternative approach to coping with this race would be to check in
br2684_start_xmit() for qspace==0 and return NETDEV_TX_BUSY, but just
using '> 0' and '< 1' for comparison instead of '== 0' and '!= 0' is
simpler. It just warranted a mention of *why* we do it that way...

Move the call to atmvcc->send() to happen *after* the accounting and
potentially stopping the netdev queue, in br2684_xmit_vcc(). This matters
if the ->send() call suffers an immediate failure, because it'll call
br2684_pop() with the offending skb before returning. We want that to
happen *after* we've done the initial accounting for the packet in
question. Also make it return an appropriate success/failure indication
while we're at it.

Tested by running 'ping -l 1000 bottomless.aaisp.net.uk' from within my
network, with only a single PPPoE-over-BR2684 link running. And after
setting txqueuelen on the nas0 interface to something low (5, in fact).
Before the patch, we'd see about 15 packets being queued and a resulting
latency of ~56ms being reached. After the patch, we see only about 8,
which is fairly much what we expect. And a max latency of ~36ms. On this
OpenWRT box, wmem_default is 163840.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Reviewed-by: Krzysztof Mazur <krzysiek@podlesie.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-26 17:13:56 -05:00
Ben Hutchings
b3422a314c dsa: Hide core config options; make drivers select what they need
Commit 82167cb8c6 ('net: dsa/slave: Fix
compilation warnings') fixed one possible invalid configuration
(NET_DSA enabled with no trailer formats) but added others: drivers
can select NET_DSA without its dependencies being met.

It's not very useful to make either the DSA core or the tagging
formats manually selectable without a driver to use them, so:

1. Define a hidden HAVE_NET_DSA option and move the dependencies of
   NET_DSA to that.  While we're at it, drop the deprecated
   EXPERIMENTAL dependency.
2. Make NET_DSA and the drivers dependent on HAVE_NET_DSA.
3. Hide the tagging format options again.
4. Make drivers select both NET_DSA and the appropriate tagging format
   option.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-26 17:10:44 -05:00
Dave Chinner
7c4cebe8e0 xfs: inode allocation should use unmapped buffers.
Inode buffers do not need to be mapped as inodes are read or written
directly from/to the pages underlying the buffer. This fixes a
regression introduced by commit 611c994 ("xfs: make XBF_MAPPED the
default behaviour").

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-11-26 16:01:31 -06:00
Satoru Takeuchi
0acba3cd01 xfs: Remove the description of nodelaylog mount option from xfs.txt
nodelaylog mount option is removed by commit 93b8a585. But there still be
the description about it in the xfs document. This patch removes it.

Signed-off-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-11-26 16:00:51 -06:00