Commit graph

360,964 commits

Author SHA1 Message Date
Johannes Berg
0172bb7507 cfg80211: use DS or HT operation IEs to determine BSS channel
Currently, mac80211 checks the DS params IE if present and
uses it for the (primary) BSS channel, instead of the one
that the frame was received on. This is particularly useful
in the 2.4 GHz band since a frame is often received on one
of the adjacent channels due to overlap.

Move this code to cfg80211 so other drivers also do this.

Additionally, on 5 GHz, in particular with some (possibly)
upcoming changes in 802.11ai and duplicate transmissions
when wider channels are used, something similar happens.
So if present, also use the (primary) channel information
contained in the HT operation IE.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-23 14:23:30 +01:00
Dave Martin
5010192d5a ARM: 7583/1: decompressor: Enable unaligned memory access for v6 and above
Modern GCC can generate code which makes use of the CPU's native
unaligned memory access capabilities.  This is useful for the C
decompressor implementations used for unpacking compressed kernels.

This patch disables alignment faults and enables the v6 unaligned
access model on CPUs which support these features (i.e., v6 and
later), allowing full unaligned access support for C code in the
decompressor.

The decompressor C code must not be built to assume that unaligned
access works if support for v5 or older platforms is included in
the kernel.

For correct code generation, C decompressor code must always use
the get_unaligned and put_unaligned accessors when dealing with
unaligned pointers, regardless of this patch.

Signed-off-by: Dave Martin <dave.martin@linaro.org>
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-11-23 13:02:03 +00:00
Lorenzo Pieralisi
ce7b175656 ARM: 7585/1: kernel: fix nr_cpu_ids check in DT logical map init
If a kernel is configured with a DT containing more /cpu nodes than
nr_cpu_ids, the number of cpus must be capped in the DT parsing
code. Current code carries out the check, but fails to cap the
value and the check is executed after the cpu logical index is used,
which can lead to memory corruption due to index overflow.

This patch refactors the check against nr_cpu_ids and move it before
any computed index is used in the parsing code.

Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Reported-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-11-23 13:01:31 +00:00
Marc Zyngier
c7cc504bc3 ARM: 7584/1: perf: fix link error when CONFIG_HW_PERF_EVENTS is not selected
Commit e50c541 (ARM: perf: add guest vs host discrimination) broken the
link as perf_instruction_pointer and perf_misc_flags are not defined
when CONFIG_HW_PERF_EVENTS is not selected.

As it make little sense to try and profile a guest without any HW event,
just fallback to the original code when this config option is not selected.

Reported-by: Russell King <linux@arm.linux.org.uk>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-11-23 13:01:30 +00:00
Scott Ling
68e1969ea7 ASoC: wm0010: Add checking for .dfw info record version.
The info record at the start of the dsp firmware file has been
expanded to incorporate additional version information. We need
to check the version to make sure we understand the layout of
the information in the record. The srec2image tool is currently
used to create this record during creation of the .dfw file.

Signed-off-by: Scott Ling <sl@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-23 21:44:15 +09:00
Laxman Dewangan
56968658ff regulator: max8973: provide enable/disable if external control disabled
If external control is enabled then do not provide regulator
enable/disable apis.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-23 21:16:35 +09:00
Guennadi Liakhovetski
f1e64f9026 regulator: add a regulator driver for the AS3711 PMIC
This driver supports the 4 DCDC and 8 LDO regulators on the AS3711 PMIC.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-23 21:14:40 +09:00
Axel Lin
bf0caae303 regulator: tps80031: Implement list_voltage and set n_voltages = 1 for fixed regulators
Implement list_voltage for fixed regulators, otherwise
regulator_is_supported_voltage() returns 0.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-23 21:13:01 +09:00
Axel Lin
1a7ae58e2c regulator: tps80031: Trivial cleanups
This patch includes below cleanups:

- Fix typo in comment
- Fix showing wrong register in dev_err
- Remove unnecessary rinfo variable
- Add TPS80032 to MODULE_DESCRIPTION

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-23 21:12:57 +09:00
Mark Brown
a8a8fc287d mfd: wm8994: Store platform data in device
This is better style as platform data is supposed to be discardable after
init (though hotplug usually prevents this) and will ease implementation
of device tree property bindings.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-23 21:10:13 +09:00
Mika Westerberg
907ddf89d0 i2c / ACPI: add ACPI enumeration support
ACPI 5 introduced I2cSerialBus resource that makes it possible to enumerate
and configure the I2C slave devices behind the I2C controller. This patch
adds helper functions to support I2C slave enumeration.

An ACPI enabled I2C controller driver only needs to call acpi_i2c_register_devices()
in order to get its slave devices enumerated, created and bound to the
corresponding ACPI handle.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-23 12:23:40 +01:00
Mark Brown
fee546ce8c mfd: wm8994: Add support for WM1811 rev E
This is supported identically to the previous revisions.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@vger.kernel.org
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-23 12:22:06 +01:00
Lee Jones
cc899bc3dc Documentation: Fix historical inconsistency in STMPE DT doc
Previously a generic binding 'i2c-client-wake' was created which
enabled I2C devices to register themselves as wake-up devices.
This binding was later over-thrown by 'wakeup-source'. The STMPE
driver was fixed-up, but the document was neglected. This patch
aims to rectify that.

Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: devicetree-discuss@lists.ozlabs.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-23 12:18:08 +01:00
Ulf Hansson
916a871c48 mfd: ab8500-core: Add abx500-clk as an mfd child device
Hierarchically, the abx500-clk shall be considered as a child of the
ab8500 core. The abx500-clk is intiated at arch init and thus the clks
will be available when clients needs them.

Cc: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-23 12:17:01 +01:00
Guennadi Liakhovetski
acad189b08 mfd: Add an AS3711 PMIC MFD driver
AS3711 is a PMIC with multiple DCDC and LDO power supplies, GPIOs, an RTC,
a battery charger and a general purpose ADC. This patch adds support for
the MFD with support for a regulator driver and a backlight driver.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-23 12:09:19 +01:00
Viresh Kumar
cb5faba951 mfd: stmpe: Use devm_*() routines
This patch frees stmpe driver from tension of freeing resources.
devm_* derivatives of multiple routines are used while allocating resources,
which would be freed automatically by kernel.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-23 12:03:17 +01:00
Sebastian Ott
683c3dcef4 s390/ccwgroup: allow drivers to call set_{on,off}line
Allow drivers to enable/disable ccwgroup devices.

Acked-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-11-23 11:14:35 +01:00
Sebastian Ott
cff971026d s390/ccwgroup: set_online return error when already online
Return -EINVAL if set_{on,off}line is called for already {on,off}line
devices. Also return -EINVAL for drivers which do not provide a callback
for set_{on,off}line. This behaviour is now consistent with the one for
ccw devices.

Reported-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Acked-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-11-23 11:14:34 +01:00
Christian Borntraeger
ce6a04ac1b s390/kvm: Fix address space mixup
I was chasing down a bug of random validity intercepts on s390.
(guest prefix page not mapped in the host virtual aspace). Turns out
that the problem was a wrong address space control element. The
cause was quite complex:

During paging activity a DAT protection during SIE caused a program
interrupt. Normally, the sie retry loop tries to catch all
interrupts during and shortly before sie to rerun the setup. The
problem is now that protection causes a suppressing program interrupt,
causing the PSW to point to the instruction AFTER SIE in case of DAT
protection. This confused the logic of the retry loop to not trigger,
instead we jumped directly back to SIE after return from
the program  interrupt. (the protection fault handler itself did
a rewind of the psw). This usually works quite well, but:

If now the protection fault handler has to wait, another program
might be scheduled in. Later on the sie process will be schedules
in again. In that case the content of CR1 (primary address space)
will be wrong because switch_to will put the user space ASCE into CR1
and not the guest ASCE.

In addition the program parameter is also wrong for every protection
fault of a guest, since we dont issue the SPP instruction.

So lets also check for PSW == instruction after SIE in the program
check handler. Instead of expensively checking all program
interruption codes that might be suppressing we assume that a program
interrupt pointing after SIE was always a program interrupt in SIE.
(Otherwise we have a kernel bug anyway).

We also have to compensate the rewinding, since the C-level handlers
will do that. Therefore we need to add a nop with the same length
as SIE before the sie_loop.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
CC: stable@vger.kernel.org
CC: Heiko Carstens <heiko.carstens@de.ibm.com>
2012-11-23 11:14:34 +01:00
Martin Schwidefsky
39efd4ec9a s390/ptrace: race of single stepping vs signal delivery
The current single step code is racy in regard to concurrent delivery
of signals. If a signal is delivered after a PER program check occurred
but before the TIF_PER_TRAP bit has been checked in entry[64].S the code
clears TIF_PER_TRAP and then calls do_signal. This is wrong, if the
instruction completed (or has been suppressed) a SIGTRAP should be
delivered to the debugger in any case. Only if the instruction has been
nullified the SIGTRAP may not be send.

The new logic always sets TIF_PER_TRAP if the program check indicates PER
tracing but removes it again for all program checks that are nullifying.
The effect is that for each change in the PSW address we now get a
single SIGTRAP.

Reported-by: Andreas Arnez <arnez@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-11-23 11:14:33 +01:00
Heiko Carstens
c68dba202f s390/disassembler: add new instructions
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2012-11-23 11:14:33 +01:00
Heiko Carstens
991c15053a s390: add zEC12 code generation support
Allow to generate code that only runs on zEC12 machines.

Also add a check which prevents the kernel to run on machines which
do not have any of the following new facilities installed:

- (48) decimal-floating-point zoned-conversion
- (49) execution-hint
- (49) load-and-trap
- (49) miscellaneous-instruction-extensions
- (49) processor-assist
- (50) constrained transactional-execution
- (73) transactional-execution

48, 49, 50 and 73 are the bit numbers of the facility indications for
each of the required facilities.

Note that we assume that user-space gets compiled with the same
compiler options, therefore we also test for a dfp facility even
if the kernel doesn't make use of it.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2012-11-23 11:14:31 +01:00
Heiko Carstens
d1e57508fb s390/topology: cleanup topology code
Mainly merge all different per-cpu arrays into a single array which
holds all topology information per logical cpu.
Also fix the broken core vs socket variable naming and simplify the
locking a bit.
When running in environments without topology information also
invent book, socket and core ids, so that not all ids are zero.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-11-23 11:14:31 +01:00
Heiko Carstens
0a4ccc9929 s390/mm: move kernel_page_present/kernel_map_pages to page_attr.c
Keep related functions together and move to appropriate file.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-11-23 11:14:31 +01:00
Heiko Carstens
6b70a92080 s390/memory hotplug: use pfmf instruction to initialize storage keys
Move and rename init_storage_keys() to pageattr.c, so it can also be
used from the sclp memory hotplug code in order to initialize
storage keys.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-11-23 11:14:30 +01:00
Ingo Tuchscherer
1e466fcf38 s390/zcrypt: msgType50 (RSA-CRT) fix
The message request handling (type50 - clear key) for RSA operations
(in CRT format) are now handled correctly with respect to the crb
format container.

Signed-off-by: Ingo Tuchscherer <ingo.tuchscherer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-11-23 11:14:30 +01:00
Heiko Carstens
a4f32bdbd9 s390/mm: keep fault_init() private to fault.c
Just convert fault_init() to an early initcall. That's still early
enough since it only needs be called before user space processes get
executed. No reason to externalize it.
Also add the function to the init section and move the store_indication
variable to the read_mostly section.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-11-23 11:14:29 +01:00
Sebastian Ott
287a093323 s390: use ccw_device_get_schid
Let the dasd driver and qdio use ccw_device_get_schid and
get rid of other similar functions.

Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-11-23 11:14:28 +01:00
Cornelia Huck
9368dac436 s390: Add a mechanism to get the subchannel id.
This will be needed by the new virtio-ccw transport.

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-11-23 11:14:28 +01:00
Jan Glauber
36eb2caa7b s390/crypto: Don't panic after crypto instruction failures
Remove the BUG_ON's that check for failure or incomplete
results of the s390 hardware crypto instructions.
Rather report the errors as -EIO to the crypto layer.

Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-11-23 11:14:27 +01:00
Jan Glauber
ce1d801462 s390/qdio: rework BUG's and WARN_ON's
Remove or replace BUG/BUG_ON where possible and convert WARN_ON
to WARN_ON_ONCE if they can occur freqeuently as pointed out by:
https://lkml.org/lkml/2012/9/27/461

Checks have been removed if:
- the error condition leads to a hardware error which gets logged
  and in most cases stops the device
- the error condition is a null pointer access
- the error condition is just pointless or already handled at
  another location

Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-11-23 11:14:27 +01:00
Sebastian Ott
773bab4a46 s390/dasd: fix multi-line printks with multiple KERN_<level>s
Do not use more than one KERN_<level> per printk.

Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Acked-by: Stefan Haberland <stefan.haberland@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-11-23 11:14:26 +01:00
Heiko Carstens
b01a37a749 s390/traps: preinitialize program check table
Preinitialize the program check table, so we can put it into the
read-only data section.
Also use only four byte entries for the table, since each program
check handler resides within the first 2GB. Therefore this reduces
the size of the table by 50% on 64 bit builds.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-11-23 11:14:25 +01:00
Heiko Carstens
f7817968d0 s390/mm,vmemmap: use 1MB frames for vmemmap
Use 1MB frames for vmemmap if EDAT1 is available in order to
reduce TLB pressure
Always use a 1MB frame even if its only partially needed for
struct pages. Otherwise we would end up with a mix of large
frame and page mappings, because vmemmap_populate gets called
for each section (256MB -> 3.5MB memmap) separately.
Worst case is that we would waste 512KB.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-11-23 11:14:25 +01:00
Heiko Carstens
18da236908 s390/mm,vmem: use 2GB frames for identity mapping
Use 2GB frames for indentity mapping if EDAT2 is
available to reduce TLB pressure.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-11-23 11:14:24 +01:00
Phil Edworthy
ce32930586 spi/sh-hspi: add CS manual control support
The current HSPI driver used automatic CS control, leading to CS
active for each byte transmitted. This patch changes the driver
to manual CS control, and ensures CS is active thoughout a whole
message. Additionally, it uses the cs_change field to determine
if CS is disabled between transfers in the message.

Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-11-23 09:52:43 +00:00
Andrea Adami
d90cb69ddd ARM: pxa: add dummy SA1100 rtc clock in pxa25x
* fix failure seen on Zaurus corgi:
* sa1100-rtc sa1100-rtc: failed to find rtc clock source
* sa1100-rtc: probe of sa1100-rtc failed with error -2

Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com>
2012-11-23 17:27:41 +08:00
Tomi Valkeinen
9b76c9cdec OMAPFB: fix compilation error
omapfb compilation fails on x86 (but not on omap):

drivers/video/omap2/omapfb/omapfb-ioctl.c: In function ‘omapfb_ioctl’:
drivers/video/omap2/omapfb/omapfb-ioctl.c:861:23: error: ‘SZ_1M’ undeclared (first use in this function)
drivers/video/omap2/omapfb/omapfb-ioctl.c:861:23: note: each undeclared identifier is reported only once for each function it appears in

Fix this by including linux/sizes.h.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-11-23 10:50:32 +02:00
Vipul Kumar Samar
037db524a2 Input: stmpe-ts - add DT support for stmpe touchscreen
This patch allows the STMPE Touchscreen driver to be successfully probed and
initialised when Device Tree support is enabled. Bindings are mentioned in
Documentation too.

Signed-off-by: Vipul Kumar Samar <vipulkumar.samar@st.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-22 23:47:09 -08:00
Linus Torvalds
26d29d06ea Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
 "This fixes recent regression where /dev/input/mice got assigned wrong
  device node which messed up setups with static /dev, and a regression
  in ads7846 GPIO debounce setup."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  ARM - OMAP: ads7846: fix pendown debounce setting
  Input: ads7846 - enable pendown GPIO debounce time setting
  Input: mousedev - move /dev/input/mice to the correct minor
  Input: MT - document new 'flags' argument of input_mt_init_slots()
2012-11-22 21:45:34 -10:00
Johannes Berg
03ae834faa mac80211: disable HT advertising unless AP supports it
If the AP doesn't support HT, or more importantly if
it does but we have to disable it because its IEs are
broken, don't advertise HT support in our association
request. Otherwise, we configure our channel to be a
20 MHz non-HT channel but the AP might still think we
support HT, or even 40 MHz.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-23 08:43:27 +01:00
Johannes Berg
a8243b7245 mac80211: rename IEEE80211_STA_DISABLE_11N to HT
Since the 11n spec amendment was rolled into the
2012 version, "11n" no longer makes sense. Use
"HT" instead.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-23 08:43:26 +01:00
Johannes Berg
76c5fa0fb9 mac80211: fix RX chains configuration
If the driver doesn't support 40 MHz channels, then
mac80211 erroneously sets number of RX chains to one
although the number of chains is independent of the
support for 40 MHz channels.

Fix this by checking the 40 MHz support only for the
code that sets the 40 MHz channel not the complete
HT code block.

This also means the HT20 channel type will always be
set in the changed code block so there's no need to
set it in case we override the AP due to invalid IEs
in the probe response/beacon.

The indentation is a bit quirky, but I'm rewriting
this code for VHT support so this will change again
very soon.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-23 08:43:26 +01:00
Sachin Kamat
00e79d1272 pinctrl: pinctrl-single: Fix error check condition
*map should be tested for NULL instead of map.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-23 08:43:09 +01:00
Johannes Berg
605f1a5b5e mac80211: fix radiotap vendor area skipping
The radiotap vendor area in the skb head must be skipped
and accounted for in a few functions until it is removed.
I missed this in my patch, so a few places use this data
as though it was the 802.11 header, fix these places.

Reported-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com>
Tested-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-23 08:41:25 +01:00
Takashi Iwai
ffe4d12b15 ALSA: hda - Add a fixup for internal mic on MacBook Pro 8,1
The internal mic on MBP81 gives only the right channel, and the left
channel is static.  Add a verb to fix the ADC2 channel mode to expand
mono right to stereo.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=50781
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-23 08:37:32 +01:00
Takashi Iwai
98415eacb3 ALSA: hda - Add missing verb applications in patch_cirrus.c
We forgot to apply the fixup verbs in cs_init().

But adding the fixup verbs will break mbp101 fixup that has been fixed
recently again, since the mbp101 fixup contains the wrong verbs to
override.  So these bogus verbs must be removed, too.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-23 08:37:32 +01:00
Takashi Iwai
829e87e04c ALSA: hda - Move static ADC setup for CS4206 to init verbs
It's constant, so better to be put in the static init array.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-23 08:37:31 +01:00
Tushar Behera
7d8dd20e56 pinctrl: SPEAr: Update error check for unsigned variables
Checking '< 0' for unsigned variables always returns false. For error
codes, use IS_ERR_VALUE() instead.

Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-23 08:33:41 +01:00
Olof Johansson
c667f757f3 Merge branch 'v3.7-samsung-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes
From Kukjin Kim:

Here is Samsung fixes for v3.7 and it is for fixing of mdma1 address
for exynos4210 rev0 SoC.

* 'v3.7-samsung-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: EXYNOS: PL330 MDMA1 fix for revision 0 of Exynos4210 SOC

Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-22 20:43:37 -08:00