Commit graph

360,964 commits

Author SHA1 Message Date
Benjamin Herrenschmidt
de1bb03af7 Merge branch 'dt' into next 2012-11-15 15:02:44 +11:00
Anton Blanchard
11ee7e99f3 powerpc: Fix CONFIG_RELOCATABLE=y CONFIG_CRASH_DUMP=n build
If we build a kernel with CONFIG_RELOCATABLE=y CONFIG_CRASH_DUMP=n,
the kernel fails when we run at a non zero offset. It turns out
we were incorrectly wrapping some of the relocatable kernel code
with CONFIG_CRASH_DUMP.

Signed-off-by: Anton Blanchard <anton@samba.org>
Cc: <stable@kernel.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15 15:02:03 +11:00
Michael Neuling
c674e703cb powerpc: Add POWER8 architected mode to cputable
A PVR of 0x0F000004 means we are arch v2.07 complicate ie, POWER8.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15 15:02:00 +11:00
Michael Neuling
df77c79920 powerpc/pseries: Update ibm,architecture.vec for PAPR 2.7/POWER8
Update ibm,architecture.vec for POWER8 and allows us to support more
than one parition per core.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15 15:01:39 +11:00
H Hartley Sweeten
dba2939c8d staging: comedi: cb_pcidas64: use cfc_check_trigger_arg_*() helpers
Use the new helpers in the step 3 tests of {ai,ao}_cmdtest().

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-14 19:42:37 -08:00
David S. Miller
80d11788fb Revert "drivers/net/phy/mdio-bitbang.c: Call mdiobus_unregister before mdiobus_free"
This reverts commit aa731872f7.

As pointed out by Ben Hutchings, this change is not correct.

mdiobus_unregister() can't be called if the bus isn't registered yet,
however this change can result in situations which cause that to
happen.

Part of the confusion here revolves around the fact that the
callers of this module control registration/unregistration,
rather than the module itself.

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-14 22:32:15 -05:00
Eric Sandeen
66bea92c69 ext4: init pagevec in ext4_da_block_invalidatepages
ext4_da_block_invalidatepages is missing a pagevec_init(),
which means that pvec->cold contains random garbage.

This affects whether the page goes to the front or
back of the LRU when ->cold makes it to
free_hot_cold_page()

Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
2012-11-14 22:22:05 -05:00
David S. Miller
702ed3c1a9 Included changes:
- hash computation improvements
 - Bridge Loop Avoidance set-up phase optimisations
 - Roaming handling code redesign
 - some code cleanups
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iEYEABECAAYFAlCj+LkACgkQpGgxIkP9cwdrJwCdF4IscHc1bVWCYdUZ39jPwM82
 3IcAn0BlPsO7cUXsNIGz3ZJZnK+ccnfq
 =a5hZ
 -----END PGP SIGNATURE-----

Merge tag 'batman-adv-for-davem' of git://git.open-mesh.org/linux-merge

Included changes:
- hash computation improvements
- Bridge Loop Avoidance set-up phase optimisations
- Roaming handling code redesign
- some code cleanups

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-14 22:10:50 -05:00
Mugunthan V N
1a39a65cba arm/dts: am33xx: Add CPSW and MDIO module nodes for AM33XX
Add CPSW and MDIO related device tree data for AM33XX.
Also enable them into board/evm dts files by providing
respective phy-id.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Cc: Benoit Cousson <b-cousson@ti.com>
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-14 22:09:07 -05:00
Mugunthan V N
e38c112d7f ARM: OMAP2+: omap2plus_defconfig: Enable CPSW support
Enable CPSW support in defconfig which is present in AM33xx SoC

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-14 22:09:07 -05:00
Mugunthan V N
70384a6af0 ARM: OMAP3+: hwmod: Add AM33XX HWMOD data for davinci_mdio module
This patch adds hwmod entry for davinci MDIO module,
creating parent<->child relationship between CPSW and MDIO module.

This Parent-child relation is required in order to use common resources
like, clock, but still maintaining the logical separation between them.

CPGMAC SubSystem consist of various sub-modules, like, mdio, cpdma,
cpsw, etc... These sub-modules are also used in some of Davinci
family of devices, so separate and independent platform devices &
drivers for CPSW and MDIO is implemented.
In case of AM33XX, the resources are shared and common register
bit-field is provided to control module/clock enable/disable,
makes it difficult to handle common resources from both drivers.

So the solution is, create parent<->child relationship between
CPGMAC & MDIO modules.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-14 22:09:06 -05:00
Mugunthan V N
71380f9bb1 net: cpsw: halt network stack before halting the device during suspend
Move network stack halt APIs before halting the hardware to ensure no
packets are queued to hardware during closing the device during
suspend sequence.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-14 22:09:06 -05:00
Richard Cochran
549985ee9c cpsw: simplify the setup of the register pointers
Instead of having a host of different register offsets in the device tree,
this patch simplifies the CPSW code by letting the driver set the proper
register offsets automatically, based on the CPSW version.

Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-14 22:09:06 -05:00
Vaibhav Hiremath
1fb19aa730 net: cpsw: Add parent<->child relation support between cpsw and mdio
CPGMAC SubSystem consist of various sub-modules, like, mdio, cpdma,
cpsw, etc... These sub-modules are also used in some of Davinci family
of devices. Now based on requirement, use-case and available technology
nodes the integration of these sub-modules varies across devices.

So coming back to Linux net driver, currently separate and independent
platform devices & drivers for CPSW and MDIO is implemented. In case of
Davinci they both has separate control, from resources perspective,
like clock.

In case of AM33XX, the resources are shared and only one register
bit-field is provided to control module/clock enable/disable, makes it
difficult to handle common resource.

So the solution here implemented in this patch is,

Create parent<->child relationship between both the drivers, making
CPSW as a parent and MDIO as its child and enumerate all the child nodes
under CPSW module.
Both the drivers will function exactly the way it was operating before,
including runtime-pm functionality. No change is required in MDIO driver
(for that matter to any child driver).

As this is only supported during DT boot, the parent<->child relationship
is created and populated in DT execution flow. The only required change
is inside DTS file, making MDIO as a child to CPSW node.

Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-14 22:09:06 -05:00
Vaibhav Hiremath
d1df50f438 net: davinci_mdio: Fix typo mistake in calling runtime-pm api
By mistake (most likely a copy-paste), instead of pm_runtime_get_sync()
api, driver is calling pm_runtime_put_sync() api in resume callback
function. The bug was introduced by commit id (ae2c07aaf74:
davinci_mdio: runtime PM support).

Now, the reason why it didn't impact functionality is, the patch has
been tested on AM335x-EVM and BeagleBone platform while submitting;
and in case of AM335x the MDIO driver doesn't control the module
enable/disable part, which is handled by CPSW driver.

Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-14 22:09:06 -05:00
David S. Miller
b092d92a68 Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next
John W. Linville says:

====================
Included is a Bluetooth pull -- Gustavo says:

"These are the Bluetooth bits for inclusion in 3.8, there is basically one big
thing here which is the High Speed patches from Andrei, he did a lot of work on
A2MP and management of AMP devices. The rest are mostly clean up and bug
fixes."

Also included is an NFC pull -- Samuel says:

"With this one we have:

- pn544 p2p support.
- pn544 physical and HCI layers separation. We are getting the pn544 driver
  ready to support non i2c physical layers.
- LLCP SNL (Service Name Lookup). This is the NFC p2p service discovery
  protocol.
- LLCP datagram sockets (connection less) support.
- IDR library usage for NFC devices indexes assignement.
- NFC netlink extension for setting and getting LLCP link characteristics.
- Various code style fixes and cleanups spread over the pn533, LLCP, HCI and
  pn544 code."

There are a couple of mac80211 pulls as well -- Johannes says:

"Please pull my mac80211-next tree to get the first round of new features
for 3.8. We have:
 * finally, the mac80211 multi-channel work
 * scan improvements:
   - bg scan
   - scan flush
   - forced AP scan
 * cfg80211 tracing
 * a bit of new code to allow implementing SAE (secure authentication of
   equals) in managed mode

Along with a few random improvements, features and fixes."

and...

"Please pull from mac80211-next (per below pull request) to get a few
updates. Most important is probably the fix for the WDS regression that
my previous pull request introduced. Other than that, I have some
tracing code, two mesh updates and a change to allow drivers to
calculate the AES CMAC subkeys without having to implement the GF_mulx
operation themselves."

On top of that are the usual updates to iwlwifi, ath9k, rt2x00,
brcmfmac, mwifiex, and a few others here and there.  Of note is the
addition of the ar5523 driver, ported from an original FreeBSD driver.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-14 22:06:57 -05:00
Michael Chan
0b3ba0553a tg3: Use tp->rxq_cnt when checking RSS tables.
irq_cnt is no longer reliable since rxq_cnt can be independently configured.

Update version to 3.127.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-14 22:04:29 -05:00
Nithin Nayak Sujir
93df8b8f46 tg3: Cleanup hardcoded ethtool test array indexes
Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-14 22:04:28 -05:00
Nithin Nayak Sujir
f4a46d1f46 tg3: Prevent spurious tx timeout by setting carrier off before tx disable.
The watchdog will not trigger when the carrier is off when reconfiguring
the device.  Because carrier state is now off during reset, we need to
introduce a link_up flag to keep track of link state during PHY setup.

Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-14 22:04:28 -05:00
Nithin Nayak Sujir
3d567e0e29 tg3: Set 10_100_ONLY flag for additional 10/100 Mbps devices
- Also refactor the conditional to use the existing tg3_pci_tbl array.
- Set flags in the driver_data field of the pci_device_id structure to
identify these devices.
- Add PCI_DEVICE_SUB() to pci.h to declare PCI 4-part IDs to match these
devices.

Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-14 22:04:28 -05:00
Nicolas Dichtel
f372341602 sit: add support of link creation via rtnl
This patch add the support of 'ip link .. type sit'.

Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-14 22:02:39 -05:00
Nicolas Dichtel
e4c94a9cdc sit: rename rtnl functions for consistency
Functions in this file start with ipip6_.

Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-14 22:02:38 -05:00
Nicolas Dichtel
a12c9a8581 sit/rtnl: add missing parameters on dump
IFLA_IPTUN_FLAGS and IFLA_IPTUN_PMTUDISC were missing.
There is only one possible flag in i_flag: SIT_ISATAP.

Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-14 22:02:38 -05:00
Nicolas Dichtel
f9cd5a5536 sit: always notify change when params are updated
netdev_state_change() was called only when end points or link was updated. Now
that all parameters are advertised via netlink, we must advertise any change.

This patch also prepares the support of sit tunnels management via rtnl. The
code which update tunnels will be put in a new function.

Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-14 22:02:38 -05:00
Nicolas Dichtel
be42da0e10 ipip: add support of link creation via rtnl
This patch add the support of 'ip link .. type ipip'.

Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-14 22:02:38 -05:00
Nicolas Dichtel
befe2aa1b2 ipip/rtnl: add IFLA_IPTUN_PMTUDISC on dump
This parameter was missing in the dump.

Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-14 22:02:38 -05:00
Nicolas Dichtel
c38cc4b599 ipip: always notify change when params are updated
netdev_state_change() was called only when end points or link was updated. Now
that all parameters are advertised via netlink, we must advertise any change.

This patch also prepares the support of ipip tunnels management via rtnl. The
code which update tunnels will be put in a new function.

Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-14 22:02:38 -05:00
Nicolas Dichtel
0b11245722 ip6tnl: add support of link creation via rtnl
This patch add the support of 'ip link .. type ip6tnl'.

Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-14 22:02:37 -05:00
Nicolas Dichtel
b58d731acc ip6tnl: rename rtnl functions for consistency
Functions in this file start with ip6_tnl_.

Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-14 22:02:37 -05:00
Nicolas Dichtel
cfa323b6b9 ip6tnl/rtnl: add IFLA_IPTUN_PROTO on dump
IPv6 tunnels can have three mode: 4in6, 6in6 and xin6.
This information was missing in the netlink message.

Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-14 22:02:37 -05:00
Kamlakant Patel
769ce4c95e net/smsc911x: Fix ready check in cases where WORD_SWAP is needed
The chip ready check added by the commit 3ac3546e [Always wait for
the chip to be ready] does not work when the register read/write
is word swapped. This check has been added before the WORD_SWAP
register is programmed, so we need to check for swapped register
value as well.

Bit 16 is marked as RESERVED in SMSC datasheet, Steve Glendinning
<steve@shawell.net> checked with SMSC and wrote:

  The chip architects have concluded we should be reading PMT_CTRL
  until we see any of bits 0, 8, 16 or 24 set.  Then we should read
  BYTE_TEST to check the byte order is correct (as we already do).

  The rationale behind this is that some of the chip variants have
  word order swapping features too, so the READY bit could actually
  be in any of the 4 possible locations.  The architects have confirmed
  that if any of these 4 positions is set the chip is ready.  The other
  3 locations will either never be set or can only go high after READY
  does (so also indicate the device is ready).

This change will check for the READY bit at the 16th position. We do
not check the other two cases (bit 8 and 24) since the driver does not
support byte-swapped register read/write.

Signed-off-by: Kamlakant Patel <kamlakant.patel@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-14 21:50:10 -05:00
Xiaotian Feng
71c6c837a0 drivers/net: fix tasklet misuse issue
In commit 175c0dff, drivers uses tasklet_kill to avoid put disabled tasklet
on the tasklet vec. But some of the drivers uses tasklet_init & tasklet_disable
in the driver init code, then tasklet_enable when it is opened. This makes
tasklet_enable on a killed tasklet and make ksoftirqd crazy then. Normally,
drivers should use tasklet_init/tasklet_kill on device open/remove, and use
tasklet_disable/tasklet_enable on device suspend/resume.

Reported-by: Peter Wu <lekensteyn@gmail.com>
Tested-by: Peter Wu <lekensteyn@gmail.com>
Signed-off-by: Xiaotian Feng <dannyfeng@tencent.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-14 21:50:10 -05:00
stephen hemminger
96800ee73c vmxnet3: fix indentation
Minor indentation out of alignment.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-14 21:48:16 -05:00
Saurabh Mohan
b2942004fb ipv4/ip_vti.c: VTI fix post-decryption forwarding
With the latest kernel there are two things that must be done post decryption
 so that the packet are forwarded.
 1. Remove the mark from the packet. This will cause the packet to not match
 the ipsec-policy again. However doing this causes the post-decryption check to
 fail also and the packet will get dropped. (cat /proc/net/xfrm_stat).
 2. Remove the sp association in the skbuff so that no policy check is done on
 the packet for VTI tunnels.

Due to #2 above we must now do a security-policy check in the vti rcv path
prior to resetting the mark in the skbuff.

Signed-off-by: Saurabh Mohan <saurabh.mohan@vyatta.com>
Reported-by: Ruben Herold <ruben@puettmann.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-14 21:40:21 -05:00
Colin Ian King
70a6f46d7b pstore: Fix NULL pointer dereference in console writes
Passing a NULL id causes a NULL pointer deference in writers such as
erst_writer and efi_pstore_write because they expect to update this id.
Pass a dummy id instead.

This avoids a cascade of oopses caused when the initial
pstore_console_write passes a null which in turn causes writes to the
console causing further oopses in subsequent pstore_console_write calls.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: stable@vger.kernel.org
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-11-14 18:30:21 -08:00
Mark Brown
ecb48c337b Merge remote-tracking branches 'regulator/fix/gpio', 'regulator/fix/put' and 'regulator/fix/supp-volt' into tmp 2012-11-15 11:16:02 +09:00
Marek Szyprowski
f0f98b19e2 regulator: fix voltage check in regulator_is_supported_voltage()
regulator_is_supported_voltage() should return true only if the voltage
of fixed/constant regulator is between min_uV and max_uV.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@vger.kernel.org
2012-11-15 11:14:18 +09:00
JoonSoo Kim
03737439d8 powerpc: Change free_bootmem() to kfree()
commit ea96025a('Don't use alloc_bootmem() in init_IRQ() path')
changed alloc_bootmem() to kzalloc(),
but missed to change free_bootmem() to kfree().
So correct it.

Signed-off-by: Joonsoo Kim <js1304@gmail.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15 13:01:16 +11:00
Aravinda Prasad
a53fd61ac2 powerpc/ptrace: Enable hardware breakpoint upon re-registering
On powerpc, ptrace will disable hardware breakpoint request once the
breakpoint is hit. It is the responsibility of the caller to set it
again. However, when the caller sets the hardware breakpoint again
using ptrace(PTRACE_SET_DEBUGREG, child_pid, 0, addr), the hardware
breakpoint is not enabled.

While gdb's approach is to unregister and re-register the hardware
breakpoint every time the breakpoint is hit - which is working fine,
this could affect other programs trying to re-register hardware
breakpoint without unregistering.

This patch enables hardware breakpoint if the caller is re-registering.

Signed-off-by: Aravinda Prasad <aravinda@linux.vnet.ibm.com>
Acked-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15 13:01:13 +11:00
Akinobu Mita
79597be99a powerpc: Use asm-generic/bitops/le.h
The only difference between powerpc and asm-generic le-bitops is
test_bit_le().  Usually all bitops require a long aligned bitmap.
But powerpc test_bit_le() can take an unaligned address.

There is no special callsite of test_bit_le() that needs unaligned
access in powerpc as far as I can see.  So convert to use
asm-generic/bitops/le.h for powerpc.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15 13:01:10 +11:00
Akinobu Mita
2237f4f40a powerpc: Remove BITOP_MASK and BITOP_WORD from asm/bitops.h
Replace BITOP_MASK and BITOP_WORD with BIT_MASK and BIT_WORD defined
in linux/bitops.h and remove BITOP_* which are not used anymore.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15 13:01:07 +11:00
Akinobu Mita
c5a0809a24 powerpc/iommu: Use bitmap library
- Caluculate the bitmap size with BITS_TO_LONGS()
 - Use bitmap_empty() to verify that all bits are cleared

This also includes a printk to pr_warn() conversion.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15 13:01:04 +11:00
Sukadev Bhattiprolu
d7a1ed163a powerpc/perf: Use uapi/unistd.h to fix build error
Use the 'unistd.h' from arch/powerpc/include/uapi to build the perf tool.

Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15 13:01:01 +11:00
Yang Li
8a56e1ee92 powerpc: Fix typos in Freescale copyright claims
There are many cases that Semiconductor is misspelled.  The patch
fix these typos.

Signed-off-by: Li Yang <leoli@freescale.com>
Acked-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15 13:00:58 +11:00
Anton Blanchard
5e0f9ea784 powerpc: Remove stale function prototypes from setup.h
I noticed a couple of function prototypes for functions that
no longer exist. Remove them.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15 13:00:54 +11:00
Anton Blanchard
560285cd2c powerpc: Move most of setup.h out of uapi
Most of setup.h should not be exported to userspace, so move it
back. All we are left with is the asm-generic include to pick
up the COMMAND_LINE_SIZE define.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15 13:00:51 +11:00
Michael Neuling
51cf2b30a5 powerpc: Fix denorm symbol name
Fix global symbol name to match actual denorm_exception_hv label.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15 13:00:48 +11:00
Michael Neuling
71e1849724 powerpc: POWER8 cputable entry
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15 13:00:45 +11:00
Michael Neuling
aec937b1ee powerpc: Add POWER8 setup code
Just a copy of POWER7 for now.  Will update with new code later.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15 13:00:42 +11:00
Michael Neuling
cd5daaf713 powerpc: make POWER7 setup code name generic
We are going to reuse this in POWER8 so make the name generic.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15 13:00:39 +11:00