Commit graph

360,964 commits

Author SHA1 Message Date
Viresh Kumar
da58445570 cpufreq: Fix sparse warning by making local function static
cpufreq_disabled() is a local function, so should be marked static.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:33:08 +01:00
Viresh Kumar
1e7586a18a cpufreq: Fix sparse warnings by updating cputime64_t to u64
There were few sparse warnings due to mismatch of type on function arguments.
Two types were used u64 and cputime64_t. Both are actually u64, so use u64 only.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:33:08 +01:00
Viresh Kumar
4471a34f9a cpufreq: governors: remove redundant code
Initially ondemand governor was written and then using its code conservative
governor is written. It used a lot of code from ondemand governor, but copy of
code was created instead of using the same routines from both governors. Which
increased code redundancy, which is difficult to manage.

This patch is an attempt to move common part of both the governors to
cpufreq_governor.c file to come over above mentioned issues.

This shouldn't change anything from functionality point of view.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:33:07 +01:00
Viresh Kumar
0676f7f2e7 cpufreq: return early from __cpufreq_driver_getavg()
There is no need to do cpufreq_get_cpu() and cpufreq_put_cpu() for drivers that
don't support getavg() routine.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:33:07 +01:00
Andreas Schwab
8636fd280e cpufreq: fix jiffies/cputime mixup in conservative/ondemand governors
The function get_cpu_idle_time_jiffy in both the conservative and
ondemand governors use jiffies_to_usecs to convert a cputime value to
usecs which gives the wrong value on architectures where cputime and
jiffies use different units.  Only matters if NO_HZ is disabled, since
otherwise get_cpu_idle_time_us should already return a valid value, and
get_cpu_idle_time_jiffy isn't actually called.

Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:33:07 +01:00
Viresh Kumar
db7011516c cpufreq: Improve debug prints
With debug options on, it is difficult to locate cpufreq core's debug prints.
Fix this by prefixing debug prints with KBUILD_MODNAME.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:33:06 +01:00
viresh kumar
2aacdfff9c cpufreq: Move common part from governors to separate file, v2
Multiple cpufreq governers have defined similar get_cpu_idle_time_***()
routines. These routines must be moved to some common place, so that all
governors can use them.

So moving them to cpufreq_governor.c, which seems to be a better place for
keeping these routines.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:33:06 +01:00
viresh kumar
4b972f0b04 cpufreq / core: Fix printing of governor and driver name
Arrays for governer and driver name are of size CPUFREQ_NAME_LEN or 16.
i.e. 15 bytes for name and 1 for trailing '\0'.

When cpufreq driver print these names (for sysfs), it includes '\n' or ' ' in
the fmt string and still passes length as CPUFREQ_NAME_LEN. If the driver or
governor names are using all 15 fields allocated to them, then the trailing '\n'
or ' ' will never be printed. And so commands like:

root@linaro-developer# cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_driver

will print something like:

cpufreq_foodrvroot@linaro-developer#

Fix this by increasing print length by one character.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:33:06 +01:00
viresh kumar
8bf1ac7236 cpufreq / core: Fix typo in comment describing show_bios_limit()
show_bios_limit is mistakenly written as show_scaling_driver in a comment
describing purpose of show_bios_limit() routine.

Fix it.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:33:05 +01:00
Bob Moore
a19ec8a607 ACPICA: Update version to 20121018
Version 20121018.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:31:30 +01:00
Bob Moore
413fc3f592 ACPICA: AcpiGetObjectInfo: Add support for ACPI 5 _SUB method
Now calls _SUB in addition to the other ID methods: _HID, _CID,
and _UID.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:31:30 +01:00
Bob Moore
17b1f45a68 ACPICA: Update for 64-bit generation of recent error message changes
Fix for errors on printf changes on 64-bit platforms and gcc.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:31:30 +01:00
Bob Moore
47abd13ccf ACPICA: Fix externalize name to complete migration to ACPI_MOVE_NAME
Fix for name segment copy and validation.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:31:29 +01:00
Bob Moore
97171c6be3 ACPICA: Add starting offset parameter to common dump buffer routine
Rename the dump buffer routines. Offset parameter can specify the
buffer starting offset that is used when displaying each line of
the buffer.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:31:29 +01:00
Bob Moore
eed9525ac4 ACPICA: Deploy ACPI_MOVE_NAME across ACPICA source base
Replaces instances of strncpy(...,4) for ACPI_NAMEs.
ACPI_MOVE_NAME optimizes these to a single 32-bit copy on machines
that support misaligned transfers.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:31:29 +01:00
Bob Moore
2d2dd50880 ACPICA: Update support for ACPI 5 MPST table
Fixes some problems introduced by late changes to the table as it
was added to the ACPI 5.0 specification.  Both the table compiler
and the disassembler and the main header support for the table.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:31:28 +01:00
Bob Moore
00eb32550f ACPICA: Enhance error reporting for invalid opcodes and bad ACPI_NAMEs
For disassembler, dump the 48 bytes surrounding the invalid
opcode.  Fix incorrect table offset reported for invalid opcodes.
Report original 32-bit value for bad ACPI_NAMEs.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:31:28 +01:00
Bob Moore
ff60027174 ACPICA: Add ACPI_MOVE_NAME macro to optimize 4-byte ACPI_NAME copies
Resolves to a 32-bit move for the normal case, strncpy on machines
that do not support misaligned transfers.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:31:28 +01:00
Bob Moore
d8da9151bb ACPICA: AcpiExec: Improve algorithm for tracking memory leaks
Add some intelligence to the code that maintains the global
list of allocated memory. The list is now ordered by allocated
memory address, significantly improving performance.  When running
AcpiExec on the ASLTS test suite, speed improvements of 3X to 5X
are seen, depending on the platform and/or the environment.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:31:27 +01:00
Bob Moore
2489ef0184 ACPICA: Add debug print message for mutex objects that are force-released
At control method termination, any currently acquired mutex
objects are force-released. Add a new message for each one that
is released.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:31:27 +01:00
Feng Tang
bee6dc39cf ACPICA: Resource Mgr: Small fix for buffer size calculation
Fixes a one byte error in the output buffer calculation.
Feng Tang - ACPICA BZ 849:
https://www.acpica.org/bugzilla/show_bug.cgi?id=849

Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:31:26 +01:00
Bob Moore
abf95c3629 ACPICA: Remove extra spaces after periods in the Intel license
For consistency with the rest of the source code.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:31:26 +01:00
Bob Moore
73a3090a21 ACPICA: Remove extra spaces after periods within comments
This makes all comments consistent.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:31:26 +01:00
Bob Moore
b9e1769357 ACPICA: Update local C library module comments for ASCII table
Improve the commenting of the table.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:31:25 +01:00
Robert Moore
267d672ab3 ACPICA: Fix for predefined name loop during ACPICA initialization
If a name cannot be created, simply continue on to the next name.
Do not attempt to use the name, do not abort.  With assistance
from Colin Ian King.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:31:25 +01:00
Bob Moore
691fda5058 ACPICA: Fix some typos in comments
No functional changes.  Some small fixes within commments. Colin
Ian King.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:31:25 +01:00
Bob Moore
4f3ca640e9 ACPICA: ACPICA core: Cleanup empty lines at file start and end
Maintenance for source code consistency.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:31:24 +01:00
Bob Moore
68aafc3516 ACPICA: Audit/update for ACPICA return macros and debug depth counter
1) Ensure that all functions that use the various TRACE macros
   also use the appropriate ACPICA return macros.
2) Ensure that all normal return statements surround the return
   expression (value) with parens.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:31:24 +01:00
Lv Zheng
86ff0e508f ACPICA: Fix unmerged acmacros.h divergences.
The 20121018 release depends on some unmerged acmaros.h fixes.
This patch includes the fixes made on acmaros.h that will not affect
the generated vmlinux binary.

This patch will not affect the generated vmlinux binary.
This will decrease 157 lines of 20120913 divergence.diff.

Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:31:23 +01:00
Lv Zheng
1f86e8c1c9 ACPICA: Fix indent caused divergences.
New version of "indent" program will generate different outputs that
will lead to the divergences between the Linux and the ACPICA.
This patch fixes such divergences caused by the "indent" program.
The version of the "indent" used for this patch is "GNU indent 2.2.11".

This patch will not affect the generated vmlinux binary.
This will decrease 581 lines of 20120913 divergence.diff.

Signed-off-by: Robert Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:31:23 +01:00
Lv Zheng
644ef74e6d ACPICA: Fix AcpiSrc caused divergences.
There are definitions that can been converted into new styles by
the recent AcpiSrc while they remain the old styles in the Linux.
This patch fixes those definitions that will be converted by the
AcpiSrc.

This patch will not affect the generated vmlinux binary.
This will decrease 97 lines of 20120913 divergence.diff.

Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:31:23 +01:00
Lv Zheng
78e25fef27 ACPICA: Fix divergences of definition conflicts.
There are conflicts in the "acpi_device_id*" definitions between the
Linux and the ACPICA.  The definitions of acpi_device_id* in ACPICA
have been changed to the "acpi_pnp_device_id*".  This patch changes
the corresponding "acpica_device_id*" definitiions in the Linux.

This patch will not affect the generated vmlinx binary.
This will decrease 298 lines of 20120913 divergence.diff.

Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:31:22 +01:00
Lv Zheng
f540fadf29 ACPICA: Fix unmerged debugger divergences.
Debugger improvements in ACPICA are always ignored by ACPICA Linux
release.  This will lead to divergences between Linux and ACPICA.
This patch fixes such unmerged debugger updates.

Following patches are included:
1. Fixed a couple compiler warnings for extra extern
   Wed, 14 Mar 2007 21:12:19 +0000
2. Cleanup for internal Reference Object.
   Wed, 27 Aug 2008 10:11:30 -0700
3. Debugger: Lock method args for multithread command.
   Fri, 24 Apr 2009 12:28:49 -0700
4. Debugger: Add max count argument for Batch command.
   Tue, 29 Sep 2009 12:31:58 -0700
5. Add new host interfaces for _OSI support.
   Thu, 5 Aug 2010 14:18:28 -0700
6. Increase debugger buffer size for method return objects.
   Wed, 17 Nov 2010 13:48:30 -0800
7. Debugger: Add command to display status of global handlers.
   Tue, 25 Jan 2011 13:47:58 -0800
8. Debugger: Split large dbcmds.c file.
   Wed, 26 Jan 2011 13:03:41 -0800
9. Debugger/AcpiExec: Add support to pass complex args to methods.
   Tue, 17 May 2011 13:33:39 -0700
10.Debugger: Add Template command to dump resource templates.
   Fri, 28 Oct 2011 14:18:51 -0700
11.Support for custom ACPICA build for ACPI 5.0 reduced hardware.
   Wed, 1 Feb 2012 13:18:17 -0800
12.Debugger: Improve command help support.
   Wed, 15 Feb 2012 07:59:26 -0800
13.Update ACPI_HW_DEPENDENT* macro invocations.
   Wed, 15 Feb 2012 08:14:08 -0800
14.Debugger: Rename function to simplify source code conversion.
   Wed, 13 Jun 2012 14:23:06 -0700
15.Debugger: Enhance "Tables" and "Unload" commands.
   Fri, 29 Jun 2012 13:10:58 -0700
16.Debugger: update prototype for AcpiDbSleep function.
   Fri, 17 Aug 2012 13:43:02 -0700

This patch will not affect the generated vmlinx binary.
This will decrease 264 lines of 20120913 divergence.diff.

Signed-off-by: Robert Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:31:22 +01:00
Lv Zheng
6d33b6be17 ACPICA: Fix unmerged utility divergences.
Utility improvements in ACPICA are partial ignored by ACPICA Linux
release.  This will lead to divergences between Linux and ACPICA.
This patch ports the entire "utility" into Linux and makes them
igored in the compilation stage by "ACPI_FUTURE_USAGE".
The following "Utility" files have been ported into the Linux:
  drivers/acpi/uttrack.c
  drivers/acpi/utcache.c
  drivers/acpi/utids.c

This patch will not affect the generated vmlinx binary.
This will decrease 274 lines of 20120913 divergence.diff.

Signed-off-by: Robert Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:31:21 +01:00
Bob Moore
45dcd31547 Cleanup of invalid ACPI name handling and repair
Implemented a change/cleanup for the handling of invalid ACPI names.
 Names are now validated and repaired only when
 1) entering a new name into the namespace and
 2) disassembling a named AML opcode. A warning is only displayed in
    debug mode or when the interpreter is in "strict" mode, since some
    working machines do in fact contain invalid ACPI names.

Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:31:21 +01:00
Rafael J. Wysocki
8e345c991c ACPI: Centralized processing of ACPI device resources
Currently, whoever wants to use ACPI device resources has to call
acpi_walk_resources() to browse the buffer returned by the _CRS
method for the given device and create filters passed to that
routine to apply to the individual resource items.  This generally
is cumbersome, time-consuming and inefficient.  Moreover, it may
be problematic if resource conflicts need to be resolved, because
the different users of _CRS will need to do that in a consistent
way.  However, if there are resource conflicts, the ACPI core
should be able to resolve them centrally instead of relying on
various users of acpi_walk_resources() to handle them correctly
together.

For this reason, introduce a new function, acpi_dev_get_resources(),
that can be used by subsystems to obtain a list of struct resource
objects corresponding to the ACPI device resources returned by
_CRS and, if necessary, to apply additional preprocessing routine
to the ACPI resources before converting them to the struct resource
format.

Make the ACPI code that creates platform device objects use
acpi_dev_get_resources() for resource processing instead of executing
acpi_walk_resources() twice by itself, which causes it to be much
more straightforward and easier to follow.

In the future, acpi_dev_get_resources() can be extended to meet
the needs of the ACPI PNP subsystem and other users of _CRS in
the kernel.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2012-11-15 00:30:21 +01:00
Rafael J. Wysocki
97d69dc061 ACPI / platform: Use common ACPI device resource parsing routines
Use common routines in drivers/acpi/resource.c to parse ACPI device
resources while creating platform device objects.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2012-11-15 00:30:12 +01:00
Rafael J. Wysocki
046d9ce682 ACPI: Move device resources interpretation code from PNP to ACPI core
Move some code used for parsing ACPI device resources from the PNP
subsystem to the ACPI core, so that other bus types (platform, SPI,
I2C) can use the same routines for parsing resources in a consistent
way, without duplicating code.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2012-11-15 00:30:01 +01:00
Fenghua Yu
a71c8bc5df x86, topology: Debug CPU0 hotplug
CONFIG_DEBUG_HOTPLUG_CPU0 is for debugging the CPU0 hotplug feature. The switch
offlines CPU0 as soon as possible and boots userspace up with CPU0 offlined.
User can online CPU0 back after boot time. The default value of the switch is
off.

To debug CPU0 hotplug, you need to enable CPU0 offline/online feature by either
turning on CONFIG_BOOTPARAM_HOTPLUG_CPU0 during compilation or giving
cpu0_hotplug kernel parameter at boot.

It's safe and early place to take down CPU0 after all hotplug notifiers
are installed and SMP is booted.

Please note that some applications or drivers, e.g. some versions of udevd,
during boot time may put CPU0 online again in this CPU0 hotplug debug mode.

In this debug mode, setup_local_APIC() may report a warning on max_loops<=0
when CPU0 is onlined back after boot time. This is because pending interrupt in
IRR can not move to ISR. The warning is not CPU0 specfic and it can happen on
other CPUs as well. It is harmless except the first CPU0 online takes a bit
longer time. And so this debug mode is useful to expose this issue. I'll send
a seperate patch to fix this generic warning issue.

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: http://lkml.kernel.org/r/1352835171-3958-15-git-send-email-fenghua.yu@intel.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-11-14 15:28:11 -08:00
Fenghua Yu
6f5298c213 x86/i387.c: Initialize thread xstate only on CPU0 only once
init_thread_xstate() is only called once to avoid overriding xstate_size during
boot time or during CPU hotplug.

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: http://lkml.kernel.org/r/1352835171-3958-14-git-send-email-fenghua.yu@intel.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-11-14 15:28:11 -08:00
Fenghua Yu
8d966a0410 x86, hotplug: Handle retrigger irq by the first available CPU
The first cpu in irq cfg->domain is likely to be CPU 0 and may not be available
when CPU 0 is offline. Instead of using CPU 0 to handle retriggered irq, we use
first available CPU which is online and in this irq's domain.

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: http://lkml.kernel.org/r/1352835171-3958-13-git-send-email-fenghua.yu@intel.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-11-14 15:28:11 -08:00
Fenghua Yu
30242aa602 x86, hotplug: The first online processor saves the MTRR state
Ask the first online CPU to save mtrr instead of asking BSP. BSP could be
offline when mtrr_save_state() is called.

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: http://lkml.kernel.org/r/1352835171-3958-12-git-send-email-fenghua.yu@intel.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-11-14 15:28:10 -08:00
Fenghua Yu
27fd185f3d x86, hotplug: During CPU0 online, enable x2apic, set_numa_node.
Previously these functions were not run on the BSP (CPU 0, the boot processor)
since the boot processor init would only be executed before this functionality
was initialized.

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: http://lkml.kernel.org/r/1352835171-3958-11-git-send-email-fenghua.yu@intel.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-11-14 15:28:10 -08:00
Fenghua Yu
e1c467e690 x86, hotplug: Wake up CPU0 via NMI instead of INIT, SIPI, SIPI
Instead of waiting for STARTUP after INITs, BSP will execute the BIOS boot-strap
code which is not a desired behavior for waking up BSP. To avoid the boot-strap
code, wake up CPU0 by NMI instead.

This works to wake up soft offlined CPU0 only. If CPU0 is hard offlined (i.e.
physically hot removed and then hot added), NMI won't wake it up. We'll change
this code in the future to wake up hard offlined CPU0 if real platform and
request are available.

AP is still waken up as before by INIT, SIPI, SIPI sequence.

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: http://lkml.kernel.org/r/1352896613-25957-1-git-send-email-fenghua.yu@intel.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-11-14 15:28:03 -08:00
Mika Westerberg
b4b6cae2f3 ACPI / platform: use ACPI device name instead of _HID._UID
Using _UID makes the ACPI platform bus code depend on BIOS to get it
right. If it doesn't we fail to create the platform device as the name
should be unique.

The ACPI core already makes a unique name when it first creates the ACPI
device so we can use that same name as the platform device name instead of
trusting that the BIOS sets the _UIDs correctly.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:28:02 +01:00
Mika Westerberg
91e5687805 ACPI: Add support for platform bus type
With ACPI 5 it is now possible to enumerate traditional SoC
peripherals, like serial bus controllers and slave devices behind
them.  These devices are typically based on IP-blocks used in many
existing SoC platforms and platform drivers for them may already
be present in the kernel tree.

To make driver "porting" more straightforward, add ACPI support to
the platform bus type.  Instead of writing ACPI "glue" drivers for
the existing platform drivers, register the platform bus type with
ACPI to create platform device objects for the drivers and bind the
corresponding ACPI handles to those platform devices.

This should allow us to reuse the existing platform drivers for the
devices in question with the minimum amount of modifications.

This changeset is based on Mika Westerberg's and Mathias Nyman's
work.

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Acked-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:28:01 +01:00
Mika Westerberg
a42b9bfe95 ACPI / ia64: Export acpi_[un]register_gsi()
These functions might be called from modules as well so make sure
they are exported.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Acked-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:28:01 +01:00
Andy Shevchenko
35e92b78c1 ACPI / x86: Export acpi_[un]register_gsi()
These functions might be called from modules as well so make sure
they are exported.

In addition, implement empty version of acpi_unregister_gsi() and
remove the one from pci_irq.c.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Acked-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:28:00 +01:00
Mika Westerberg
cf761af9ee ACPI: Provide generic functions for matching ACPI device nodes
Introduce function acpi_match_device() allowing callers to match
struct device objects with populated acpi_handle fields against
arrays of ACPI device IDs.  Also introduce function
acpi_driver_match_device() using acpi_match_device() internally and
allowing callers to match a struct device object against an array of
ACPI device IDs provided by a device driver.

Additionally, introduce macro ACPI_PTR() that may be used by device
drivers to escape pointers to data structures whose definitions
depend on CONFIG_ACPI.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Acked-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:28:00 +01:00
Mika Westerberg
06f64c8f23 driver core / ACPI: Move ACPI support to core device and driver types
With ACPI 5 we are starting to see devices that don't natively support
discovery but can be enumerated with the help of the ACPI namespace.
Typically, these devices can be represented in the Linux device driver
model as platform devices or some serial bus devices, like SPI or I2C
devices.

Since we want to re-use existing drivers for those devices, we need a
way for drivers to specify the ACPI IDs of supported devices, so that
they can be matched against device nodes in the ACPI namespace.  To
this end, it is sufficient to add a pointer to an array of supported
ACPI device IDs, that can be provided by the driver, to struct device.

Moreover, things like ACPI power management need to have access to
the ACPI handle of each supported device, because that handle is used
to invoke AML methods associated with the corresponding ACPI device
node.  The ACPI handles of devices are now stored in the archdata
member structure of struct device whose definition depends on the
architecture and includes the ACPI handle only on x86 and ia64. Since
the pointer to an array of supported ACPI IDs is added to struct
device_driver in an architecture-independent way, it is logical to
move the ACPI handle from archdata to struct device itself at the same
time.  This also makes code more straightforward in some places and
follows the example of Device Trees that have a poiter to struct
device_node in there too.

This changeset is based on Mika Westerberg's work.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Acked-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:28:00 +01:00