Commit graph

360,964 commits

Author SHA1 Message Date
Axel Lin
03019759b9 extcon: adc-jack: Fix checking return value of request_any_context_irq
On failure, request_any_context_irq() returns a negative value.
On success, it returns either IRQC_IS_HARDIRQ or IRQC_IS_NESTED.

Also ensure adc_jack_probe() return 0 on success.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2012-10-23 16:32:13 +09:00
Sachin Kamat
5cd3c277eb extcon: Fix return value in extcon_register_interest()
Propagate the value returned from extcon_find_cable_index()
instead of -ENODEV. For readability, -EINVAL is returned in place of
the variable.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2012-10-23 16:32:13 +09:00
Peter Huewe
824a1bc045 extcon: unregister compat link on cleanup
Since extcon registers this compat link at device registration
(extcon_dev_register), we should probably remove them at deregistration/cleanup.

Cc: stable@vger.kernel.org
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2012-10-23 16:32:12 +09:00
Peter Huewe
0dc77b6dab extcon: Unregister compat class at module unload to fix oops
If you compile extcon with CONFIG_ANDROID and then load and unload the
module you get a simple oops as the driver does not unregister its
compat class and thus cannot register it again.

Full trace:

root@(none):~# modprobe extcon_class
root@(none):~# rmmod extcon_class
root@(none):~# modprobe extcon_class
------------[ cut here ]------------
WARNING: at fs/sysfs/dir.c:536 sysfs_add_one+0xde/0x100()
sysfs: cannot create duplicate filename '/class/switch'
Modules linked in: extcon_class(+) [last unloaded: extcon_class]
Call Trace:
9f451a00:  [<602a58bc>] printk+0x0/0xa8
9f451a18:  [<60039b43>] warn_slowpath_common+0x93/0xd0
9f451a28:  [<6012c6de>] sysfs_add_one+0xde/0x100
9f451a50:  [<601d3d90>] strcat+0x0/0x40
9f451a68:  [<60039cdc>] warn_slowpath_fmt+0x9c/0xa0
9f451a90:  [<6002fe32>] unblock_signals+0x0/0x84
9f451ab0:  [<60039c40>] warn_slowpath_fmt+0x0/0xa0
9f451ac0:  [<6002fe32>] unblock_signals+0x0/0x84
9f451ae8:  [<6012bd97>] sysfs_pathname.isra.10+0x57/0x70
9f451b00:  [<601d3d90>] strcat+0x0/0x40
9f451b18:  [<6012bd97>] sysfs_pathname.isra.10+0x57/0x70
9f451b48:  [<6012c6de>] sysfs_add_one+0xde/0x100
9f451b78:  [<6012c96f>] create_dir+0x8f/0x100
9f451bc0:  [<a0861000>] extcon_class_init+0x0/0x12 [extcon_class]
9f451bd8:  [<6012cda6>] sysfs_create_dir+0xa6/0x1c0
9f451be8:  [<601d89f1>] kvasprintf+0x81/0xa0
9f451bf8:  [<601cf0f0>] kobject_get+0x0/0x50
9f451c18:  [<601cf396>] kobject_add_internal+0x96/0x280
9f451c60:  [<a0861000>] extcon_class_init+0x0/0x12 [extcon_class]
9f451c78:  [<601cfb93>] kobject_add+0xd3/0x140
9f451cc0:  [<601cfac0>] kobject_add+0x0/0x140
9f451cd0:  [<6002fe32>] unblock_signals+0x0/0x84
9f451cf8:  [<6002fffc>] set_signals+0x29/0x3f
9f451d28:  [<600c1de1>] kmem_cache_alloc+0xe1/0x100
9f451d78:  [<601cffa0>] kobject_create_and_add+0x50/0xa0
9f451da8:  [<601fbe76>] class_compat_register+0x56/0x80
9f451dc8:  [<a085d118>] create_extcon_class+0x88/0xd0 [extcon_class]
9f451de8:  [<a0861010>] extcon_class_init+0x10/0x12 [extcon_class]
9f451df8:  [<600189a8>] do_one_initcall+0x48/0x1f0
9f451e20:  [<60061920>] blocking_notifier_call_chain+0x0/0x20
9f451e30:  [<60061920>] blocking_notifier_call_chain+0x0/0x20
9f451e58:  [<6007e3c3>] sys_init_module+0xa3/0x280
9f451e88:  [<6001e2ad>] handle_syscall+0x8d/0x90
9f451ea8:  [<60033370>] userspace+0x405/0x531
9f451ee8:  [<6001e380>] copy_chunk_to_user+0x0/0x40
9f451ef8:  [<6001e5cd>] do_op_one_page+0x14d/0x220
9f451fd8:  [<6001a355>] fork_handler+0x95/0xa0

---[ end trace dd512cc03fe1c367 ]---
------------[ cut here ]------------
WARNING: at lib/kobject.c:196 kobject_add_internal+0x26e/0x280()
kobject_add_internal failed for switch with -EEXIST, don't try to
register things with the same name in the same directory.
Modules linked in: extcon_class(+) [last unloaded: extcon_class]
Call Trace:
9f451ad0:  [<602a58bc>] printk+0x0/0xa8
9f451ae8:  [<60039b43>] warn_slowpath_common+0x93/0xd0
9f451af8:  [<601cf56e>] kobject_add_internal+0x26e/0x280
9f451b18:  [<601cf140>] kobject_put+0x0/0x70
9f451b20:  [<a0861000>] extcon_class_init+0x0/0x12 [extcon_class]
9f451b38:  [<60039cdc>] warn_slowpath_fmt+0x9c/0xa0
9f451b88:  [<60039c40>] warn_slowpath_fmt+0x0/0xa0
9f451bc0:  [<a0861000>] extcon_class_init+0x0/0x12 [extcon_class]
9f451bd8:  [<6012cda6>] sysfs_create_dir+0xa6/0x1c0
9f451be8:  [<601d89f1>] kvasprintf+0x81/0xa0
9f451bf8:  [<601cf0f0>] kobject_get+0x0/0x50
9f451c18:  [<601cf56e>] kobject_add_internal+0x26e/0x280
9f451c60:  [<a0861000>] extcon_class_init+0x0/0x12 [extcon_class]
9f451c78:  [<601cfb93>] kobject_add+0xd3/0x140
9f451cc0:  [<601cfac0>] kobject_add+0x0/0x140
9f451cd0:  [<6002fe32>] unblock_signals+0x0/0x84
9f451cf8:  [<6002fffc>] set_signals+0x29/0x3f
9f451d28:  [<600c1de1>] kmem_cache_alloc+0xe1/0x100
9f451d78:  [<601cffa0>] kobject_create_and_add+0x50/0xa0
9f451da8:  [<601fbe76>] class_compat_register+0x56/0x80
9f451dc8:  [<a085d118>] create_extcon_class+0x88/0xd0 [extcon_class]
9f451de8:  [<a0861010>] extcon_class_init+0x10/0x12 [extcon_class]
9f451df8:  [<600189a8>] do_one_initcall+0x48/0x1f0
9f451e20:  [<60061920>] blocking_notifier_call_chain+0x0/0x20
9f451e30:  [<60061920>] blocking_notifier_call_chain+0x0/0x20
9f451e58:  [<6007e3c3>] sys_init_module+0xa3/0x280
9f451e88:  [<6001e2ad>] handle_syscall+0x8d/0x90
9f451ea8:  [<60033370>] userspace+0x405/0x531
9f451ee8:  [<6001e380>] copy_chunk_to_user+0x0/0x40
9f451ef8:  [<6001e5cd>] do_op_one_page+0x14d/0x220
9f451fd8:  [<6001a355>] fork_handler+0x95/0xa0

---[ end trace dd512cc03fe1c368 ]---
kobject_create_and_add: kobject_add error: -17
------------[ cut here ]------------
WARNING: at drivers/extcon/extcon_class.c:545
create_extcon_class+0xbc/0xd0 [extcon_class]()
cannot allocate
Modules linked in: extcon_class(+) [last unloaded: extcon_class]
Call Trace:
9f451c80:  [<602a58bc>] printk+0x0/0xa8
9f451c98:  [<60039b43>] warn_slowpath_common+0x93/0xd0
9f451ca0:  [<6002fe32>] unblock_signals+0x0/0x84
9f451ca8:  [<a085d14c>] create_extcon_class+0xbc/0xd0 [extcon_class]
9f451cd0:  [<a0861000>] extcon_class_init+0x0/0x12 [extcon_class]
9f451ce8:  [<60039cdc>] warn_slowpath_fmt+0x9c/0xa0
9f451d20:  [<6002fe32>] unblock_signals+0x0/0x84
9f451d28:  [<60039c40>] warn_slowpath_fmt+0x0/0xa0
9f451d48:  [<6002fffc>] set_signals+0x29/0x3f
9f451d58:  [<601cf172>] kobject_put+0x32/0x70
9f451d78:  [<600c22c3>] kfree+0xb3/0x100
9f451da8:  [<601fbe9a>] class_compat_register+0x7a/0x80
9f451dc8:  [<a085d14c>] create_extcon_class+0xbc/0xd0 [extcon_class]
9f451de8:  [<a0861010>] extcon_class_init+0x10/0x12 [extcon_class]
9f451df8:  [<600189a8>] do_one_initcall+0x48/0x1f0
9f451e20:  [<60061920>] blocking_notifier_call_chain+0x0/0x20
9f451e30:  [<60061920>] blocking_notifier_call_chain+0x0/0x20
9f451e58:  [<6007e3c3>] sys_init_module+0xa3/0x280
9f451e88:  [<6001e2ad>] handle_syscall+0x8d/0x90
9f451ea8:  [<60033370>] userspace+0x405/0x531
9f451ee8:  [<6001e380>] copy_chunk_to_user+0x0/0x40
9f451ef8:  [<6001e5cd>] do_op_one_page+0x14d/0x220
9f451fd8:  [<6001a355>] fork_handler+0x95/0xa0

---[ end trace dd512cc03fe1c369 ]---
FATAL: Error inserting extcon_class
(/lib/modules/3.6.0-rc6-00178-g811315f/kernel/drivers/extcon/extcon_class.ko):
Cannot allocate memory

This patch fixes this.

Cc: stable@vger.kernel.org
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2012-10-23 16:32:11 +09:00
David S. Miller
598e74f32c Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next
Jeff Kirsher says:

====================
This series contains updates to ixgbe only.  Only change to this series
is I dropped the "ixgbe: Add support for pipeline reset" due to
change requested by Martin Josefsson.

Alexander Duyck (7):
  ixgbe: Add support for IPv6 and UDP to ixgbe_get_headlen
  ixgbe: Add support for tracking the default user priority to SR-IOV
  ixgbe: Add support for GET_QUEUES message to get DCB configuration
  ixgbe: Enable support for VF API version 1.1 in the PF.
  ixgbevf: Add VF DCB + SR-IOV support
  ixgbe: Drop unnecessary addition from ixgbe_set_rx_buffer_len
  ixgbe: Fix possible memory leak in ixgbe_set_ringparam

Don Skidmore (1):
  ixgbe: Add function ixgbe_reset_pipeline_82599

Emil Tantilov (1):
  ixgbe: add WOL support for new subdevice id

Jacob Keller (1):
  ixgbe: (PTP) refactor init, cyclecounter and reset

Tushar Dave (1):
  ixgbe: Correcting small packet padding

Wei Yongjun (1):
  ixgbe: using is_zero_ether_addr() to simplify the code
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-23 02:51:00 -04:00
Kuninori Morimoto
1cb60156de usb: renesas_usbhs: fixup dma transfer stall
renesas_usbhs driver can switch DMA/PIO transfer by using handler,
and each handler have push/pop direction.
But unfortunately, current dma push handler didn't a path
which calls usbhs_pipe_enable(). Thus, dma transfer never happened.
this patch fixes it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-10-23 09:44:37 +03:00
Kuninori Morimoto
4f053a24ec usb: renesas_usbhs: fixup: avoid NULL access on error case pipe detach
If renesas_usbhs or DMAEngine interrupt didn't happen by a certain cause,
urb->ep will be NULL by usb time out.
Then, host mode will access to it and crash kernel.
This patch fixes it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-10-23 09:44:08 +03:00
Jerry Chu
37561f68bd tcp: Reject invalid ack_seq to Fast Open sockets
A packet with an invalid ack_seq may cause a TCP Fast Open socket to switch
to the unexpected TCP_CLOSING state, triggering a BUG_ON kernel panic.

When a FIN packet with an invalid ack_seq# arrives at a socket in
the TCP_FIN_WAIT1 state, rather than discarding the packet, the current
code will accept the FIN, causing state transition to TCP_CLOSING.

This may be a small deviation from RFC793, which seems to say that the
packet should be dropped. Unfortunately I did not expect this case for
Fast Open hence it will trigger a BUG_ON panic.

It turns out there is really nothing bad about a TFO socket going into
TCP_CLOSING state so I could just remove the BUG_ON statements. But after
some thought I think it's better to treat this case like TCP_SYN_RECV
and return a RST to the confused peer who caused the unacceptable ack_seq
to be generated in the first place.

Signed-off-by: H.K. Jerry Chu <hkchu@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-23 02:42:56 -04:00
Wei Yongjun
000b7f5127 usb: gadget: net2272: fix missing unlock on error in net2272_irq()
Add the missing unlock on the error handle path in function
net2272_irq().

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-10-23 09:42:50 +03:00
Daniel Mack
ca749b2a2e usb: musb: dsps: fix res_name length
The res_name is used for the name construction of a DT property as
follows:

  sprintf(res_name, "port%d-mode", id);

Hence, res_name must be at least 11 characters long in order to store
the name including the terminating '\0'.

While at it, use to snprintf() rather than sprintf() when accessing this
buffer.

Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-10-23 09:42:29 +03:00
Bjørn Mork
9f651cace3 net: cdc_mbim: Device Service Stream support
MBIM devices can support up to 256 generic streams called
Device Service Streams (DSS). The MBIM spec says

   The format of the Device Service Stream payload depends
   on the device service (as identified by the corresponding
   UUID) that is used when opening the data stream.

Example use cases are serial AT command interfaces and NMEA
data streams. We cannot make any assumptions about these
device services.

Adding support for Device Service Stream by extending
the MBIM session to VLAN mapping scheme, allocating
VLAN IDs 256 to 511 for DSS, using the DSS SessionID
as the lower 8bit of the VLAN ID.

Using a netdev for DSS keeps the device framing intact and
allows userspace to do whatever it want with the streams.
For example, exporting an AT command interface using DSS
session #0 to a PTY for use with a terminal application like
minicom:

  vconfig add wwan0 256
  ip link set dev wwan0 up
  ip link set dev wwan0.256 up
  socat INTERFACE:wwan0.256,type=2 PTY:,echo=0,link=/tmp/modem

Device configuration must be done using MBIM control commands
over the /dev/cdc-wdmx device. The userspace management
application should coordinate host VLAN configuration and the
device MBIM configuration using the device capabilities to
find out if it needs to set up PTY mappings etc.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-23 02:40:11 -04:00
Bjørn Mork
a82c7ce5bc net: cdc_ncm: map MBIM IPS SessionID to VLAN ID
MBIM devices can support up to 256 independent IP Streams.
The main network device will only handle SessionID 0. Mapping
SessionIDs 1 to 255 to VLANs using the SessionID as VLAN ID
allow userspace to use these streams with traditional tools
like vconfig.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-23 02:40:11 -04:00
Bjørn Mork
bd329e1284 net: cdc_ncm: do not bind to NCM compatible MBIM devices
The MBIM specification allows a MBIM device to disguise
itself as NCM for backwards compatibility, using additional
altsettings with different subclass (control) or protocol
(data):

C:* #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0d Prot=00 Driver=cdc_mbim
E:  Ad=81(I) Atr=03(Int.) MxPS=  64 Ivl=7ms
I:* If#= 0 Alt= 1 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim
E:  Ad=81(I) Atr=03(Int.) MxPS=  64 Ivl=7ms
I:  If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=01 Driver=cdc_mbim
I:  If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=01 Driver=cdc_mbim
E:  Ad=81(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 2 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E:  Ad=81(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms

If the MBIM driver is enabled then that should have priority
for devices providing such a NCM 1.0 backward compatibility
mode.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Suarez <gsuarez@smithmicro.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-23 02:40:11 -04:00
Bjørn Mork
9084ccf9f7 net: cdc_mbim: build the MBIM driver
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-23 02:40:11 -04:00
Greg Suarez
9bf211a30b net: cdc_mbim: adding MBIM driver
The CDC Mobile Broadband Interface Model (MBIM) specification
extends CDC NCM by
 - removing the redundant ethernet header from the point-to-point
   USB channel
 - adding support for multiple IP (v4 and/or v6) sessions multiplexed
   on the same USB channel
 - adding a MBIM control channel encapsulated in CDC
 - adding Device Service Streams (DSS), which are non IP generic data
   streams multiplexed on the same USB channel as the IP sessions

MBIM devices are managed using the dedicated control channel, and no
data will flow on the data channel until a control session has been
established.  This driver has no knowledge of MBIM control messages.
It just exports the control channel to a /dev/cdc-wdmX character
device for userspace management applications. Such an application is
therefore required to use this driver.

This patch implements basic MBIM support, reusing the NCM and WDM driver
APIs, currently limited to IP sessions with SessionID 0. DSS and
multiplexed IP sessions are not yet supported.

Signed-off-by: Greg Suarez <gsuarez@smithmicro.com>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-23 02:40:11 -04:00
Bjørn Mork
c91ce3b6bf net: cdc_ncm: export shared symbols and definitions
Move symbols and definitons which can be shared with a
MBIM driver in a new header.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-23 02:40:11 -04:00
Bjørn Mork
c78b7c5866 net: cdc_ncm: refactoring for tx multiplexing
Adding multiplexed NDP support to cdc_ncm_fill_tx_frame, allowing
transmissions of multiple independent sessions within the same NTB.

Refactoring the code quite a bit to avoid having to store copies
of multiple NDPs being prepared for tx. The old code would still
reserve enough room for a maximum sized NDP in the skb so we might
as well keep them in the skb while they are being prepared.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-23 02:40:11 -04:00
Bjørn Mork
ff06ab13a4 net: cdc_ncm: splitting rx_fixup for code reuse
Verifying and handling received MBIM and NCM frames will need
to be different in three areas:
 - verifying the NDP signature
 - checking valid datagram length
 - datagram header manipulation

This makes it inconvenient to share rx_fixup in whole.  But
some verification parts are common.  Split these out in separate
functions.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-23 02:40:10 -04:00
Bjørn Mork
75d67d354f net: cdc_ncm: process chained NDPs
The NCM 1.0 spefication makes provisions for linking more than
one NDP into a single NTB. This is important for MBIM support,
where these NDPs might be of different types.

Following the chain of NDPs is also correct for NCM, and will
not change anything in the common case where there is only
one NDP

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-23 02:40:10 -04:00
Greg Suarez
38396e4c29 net: cdc_ncm: refactor bind preparing for MBIM support
NCM and MBIM can share most of the bind function.  Split
out the shareable part and add MBIM functional descriptor
parsing.

Signed-off-by: Greg Suarez <gsuarez@smithmicro.com>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-23 02:40:10 -04:00
Greg Suarez
2d1c431077 net: cdc_ncm: adding MBIM support to ncm_setup
MBIM and NCM are very similar, so we can reuse most of the
setup and bind logic in cdc_ncm for CDC MBIM devices.  Handle
a few minor differences in ncm_setup.

Signed-off-by: Greg Suarez <gsuarez@smithmicro.com>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-23 02:40:10 -04:00
Greg Suarez
51615edd0a USB: cdc: add MBIM constants and structures
Based on revision 1.0 of "Universal Serial Bus Communications
Class Subclass Specification for Mobile Broadband Interface
Model" available from www.usb.org

Signed-off-by: Greg Suarez <gsuarez@smithmicro.com>
[bmork: added DSS defines]
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-23 02:40:10 -04:00
Bjørn Mork
dad957d738 net: cdc_ncm: workaround NTB input size firmware bug
Some devices do not support the 8 byte variants of the NTB input
size control messages despite announcing such support in their
NCM or MBIM functional descriptor.

According to the NCM specification, all devices must support the
4 byte variant regardless of whether or not the flag is set:

  If bit D5 is set in the bmNetworkCapabilities field of
  function’s NCM Functional Descriptor, the host may
  set wLength either to 4 or to 8. If wLength is 4, the
  function shall assume that wNtbInMaxDatagrams is to be
  set to zero. If wLength is 8, then the function shall
  use the provided value as the limit. The function shall
  return an error response (a STALL PID) if wLength is set
  to any other value.

We do not set wNtbInMaxDatagrams in any case, so we can just as
well unconditionally use the 4 byte variant without losing any
functionality.  This works around the known firmware bug, and
simplifies the code considerably.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-23 02:40:10 -04:00
Joachim Eastwood
0668744f79 net/at91_ether: add pdata flag for reverse Eth addr
This will allow us to remove the last mach include from at91_ether
and also make it easier to share address setup with macb.

Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-23 02:40:10 -04:00
Joachim Eastwood
f4a15e1b29 net/at91_ether: select MACB in Kconfig
Now that HAVE_NET_MACB is gone let's just select MACB to
satisfy the dependecies in at91_ether.

Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-23 02:40:09 -04:00
Joachim Eastwood
84222e20c1 net/cadence: get rid of HAVE_NET_MACB
macb is a platform driver and there is nothing that prevents
this driver from being built on non-ARM/AVR32 platforms.

Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-23 02:40:09 -04:00
Joachim Eastwood
95ebcea69c net/macb: fix truncate warnings
When building macb on x86_64 the following warnings show up:
  drivers/net/ethernet/cadence/macb.c: In function macb_interrupt:
  drivers/net/ethernet/cadence/macb.c:556:4: warning: large integer implicitly truncated to unsigned type [-Woverflow]
  drivers/net/ethernet/cadence/macb.c: In function macb_reset_hw:
  drivers/net/ethernet/cadence/macb.c:792:2: warning: large integer implicitly truncated to unsigned type [-Woverflow]
  drivers/net/ethernet/cadence/macb.c:793:2: warning: large integer implicitly truncated to unsigned type [-Woverflow]
  drivers/net/ethernet/cadence/macb.c:796:2: warning: large integer implicitly truncated to unsigned type [-Woverflow]

Use -1 insted of ~0UL, as done in other places in the driver,
to silence these warnings.

Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-23 02:40:09 -04:00
Nicolas Dichtel
51ebd31815 ipv6: add support of equal cost multipath (ECMP)
Each nexthop is added like a single route in the routing table. All routes
that have the same metric/weight and destination but not the same gateway
are considering as ECMP routes. They are linked together, through a list called
rt6i_siblings.

ECMP routes can be added in one shot, with RTA_MULTIPATH attribute or one after
the other (in both case, the flag NLM_F_EXCL should not be set).

The patch is based on a previous work from
Luc Saillard <luc.saillard@6wind.com>.

Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-23 02:38:32 -04:00
Jean Delvare
0b63bf1fe6 MAINTAINERS: NETWORKING DRIVERS matches too much
File pattern include/linux/*device.h matches too much, including
completely unrelated files. Replace it with an explicit list of
network device-related header files.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Joe Perches <joe@perches.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-23 02:33:11 -04:00
Veaceslav Falico
a35279f002 pch_gbe: don't reset MAC_RX on FIFO overflow
Currently, when FIFO_ERR happens, we stop the dma, wait for it to become
idle and then reset the whole MAC_RX logic (and after that we must re-set
multicast addresses and also re-enable MAC_RX when we're finally ready to
accept new packets). This leads to CRC errors on high number of incoming
packets and is not needed according to the datasheet.

This patch fixes it by the following steps:

1) remove this reset in pch_gbe_stop_receive(), which causes some functions
to not be used anywhere
2) remove already unused functions pch_gbe_wait_clr_bit_irq() and
pch_gbe_mac_reset_rx() to correctly build
3) move pch_gbe_enable_mac_rx() out of pch_gbe_start_receive() to
pch_gbe_up() where it's only needed after we've removed the MAC_RX reset
4) rename pch_gbe_start/stop_receive() to pch_gbe_enable/disable_dma_rx()
to more precisely reflect what the functions are now doing.

After these changes we already don't see the CRC errors and gain some
increase in RX processing speed.

Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-23 02:31:15 -04:00
Veaceslav Falico
9c0314e111 pch_gbe: don't re-set RX_FIFO_ERR flag in napi_poll
If we were in RX_FIFO_ERR state and entered pch_gbe_napi_poll(), we'll
anyway clean some rx space and thus can continue to receive more packets.
Currently, we re-set the RX_FIFO_ERR in situations when we've exhausted our
budget for RX cleaning or cleaned some TX packets. Removing it gives us
+20%-40% speed increase and a lot less of RX_FIFO_ERRors reported.

Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-23 02:31:15 -04:00
Veaceslav Falico
e408a9ff3c pch_gbe: create functions for MAC_RX {en,dis}able
Move MAC_RX-related bits into separate functions.

Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-23 02:31:15 -04:00
Linus Torvalds
2d1f4c8e09 Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
 "Fixes for intel and nouveau mainly.

   - intel: disable HSW by default, sdvo fixes, link train regression
     fix
   - nouveau: acpi rom loading regression fix, with a few other fixes
     from the rework
   -core: just other minor fixes and race fixes for ttm."

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (24 commits)
  drm/ttm: Fix a theoretical race in ttm_bo_cleanup_refs()
  drm/ttm: Fix a theoretical race
  drm: platform: Don't initialize driver-private data
  drm/debugfs: remove redundant info from gem_names
  drm: fb: cma: Fail gracefully on allocation failure
  drm: fb: cma: Fix typo in debug message
  drm/nouveau/clock: fix missing pll type/addr when matching default entry
  drm/nouveau/fb: fix reporting of memory type on GF8+ IGPs
  drm/nv41/vm: don't init hw pciegart on boards with agp bridge
  drm/nouveau/bios: fetch full 4KiB block to determine ACPI ROM image size
  drm/nouveau: validate vbios size
  drm/nouveau: warn when trying to free mm which is still in use
  drm/nouveau: fix nouveau_mm/nouveau_mm_node leak
  drm/nouveau/bios: improve error handling when reading the vbios from ACPI
  drm/nouveau: handle same-fb page flips
  drm/i915: Initialize obj->pages before use by i915_gem_object_do_bit17_swizzle()
  drm/i915: Add no-lvds quirk for Supermicro X7SPA-H
  drm/i915: Insert i915_preliminary_hw_support variable.
  drm/i915: shut up spurious WARN in the gtt fault handler
  Revert "drm/i915: Try harder to complete DP training pattern 1"
  ...
2012-10-23 08:51:07 +03:00
Linus Torvalds
d888af9654 Bug fix: Fix FITRIM argument handling
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQIcBAABAgAGBQJQhZDSAAoJEDaohF61QIxkwgkP/0j/ygUXo50k7EkdwFsC0mHw
 lQ5iirP7oUJ1p1v2PeaBqBulql5yseqTj6keLTTrYSBG/Ocp8qir9z0pyqWjN112
 DU8o/CPSVXnAj64d7Nu/YZBGdUHWQu+1Wex+nDyh2QXdJx94G3SoE3ZZ86BiXJ01
 1rVvHB+FuyzbKFCEk8hslKyJ8WHv1flu+9ulxQXDATrxJxqqTvBkRdT21h3Ds+d8
 HQhxj2RHT7yVHWvyQumTNLLVWOtuT+Svd3Mglzl4bbfAQ49THJFHaxGp1ufGZlR/
 iZ2+yoTU9ze+2JZ8FuCCkSfhv55iugLS8FRHUT6VdErOKnHum4aZgkHCz3oA0c5B
 FI/8pVUqEkf3wENxaM96O+XEIxF4ChMeF+fm3niMb0nL3Fiv7Sx97XExTqMhVhlv
 Xn+t71oNaU2xhus2A9Nd95oGEg9qQ2L0fvDWDV7/p+PvRRkCd0oKBVILZhVCMJ/V
 hvhbhNObUNWAb8x1pmrgWyk2H+dn4tX5SbyrbxnEAmX3oifw7CCfmZGDF+nanmMt
 cnqIjQ3qZxvQ/io6Edye0NX21K0HQcS2Bdh09uuWT+C3UNjwqGceyZdeay2gdWpP
 R7DgiaSm7+590InRweuREttVFigzOVDhN3zZTwlPGLUZ3q9EwdOcnhrPMD8ThT48
 mVWzYaPwGax3Ro3IjWsJ
 =M5iC
 -----END PGP SIGNATURE-----

Merge tag 'jfs-3.7-2' of git://github.com/kleikamp/linux-shaggy

Pull jfs fix from Dave Kleikamp:
 "Bug fix: Fix FITRIM argument handling"

* tag 'jfs-3.7-2' of git://github.com/kleikamp/linux-shaggy:
  jfs: Fix FITRIM argument handling
2012-10-23 08:49:34 +03:00
Mischa Jonker
e4b2900946 Input: serio - add ARC PS/2 driver
This adds support for the PS/2 block that is used in various ARC FPGA
platforms.

Signed-off-by: Mischa Jonker <mischa.jonker@synopsys.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-10-22 22:48:32 -07:00
Linus Torvalds
e589db7a6a Various bug fixes for ext4. The most serious of them fixes a security
bug (CVE-2012-4508) which leads to stale data exposure when we have
 fallocate racing against writes to files undergoing delayed
 allocation.  We also have two fixes for the metadata checksum feature,
 the most serious of which can cause the superblock to have a invalid
 checksum after a power failure.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABCAAGBQJQhcJVAAoJENNvdpvBGATwlc0QAJ5eRVSXoQ9DL/rpycZtWsiR
 1HofZCBbeVJq7JkazypYZPV+ncm2Nxljx61EBMpReDgx+hgJS8VD7BcjxblXT1gK
 cvIk7tYXS1E5++TWZzQd0v3GMDoMJsfzb0Ao6vefaVgqh07MKE9Zvx0L8JR4tsH1
 YlRs2/ZALFqqMficemXpDuWRRoBTEcYkvaW9PtUIpeuk9i71iSCDiHvi0mRy4dYe
 nLftjBOjcsIuK0I7DfUYrbZNQuYacFcFTM5foE6lhdT+tlL1/od2M00IpopSSjF8
 7RoqV351FqL74Stu71wDp+q9n8t8bR9gnvEuDisHXXH6PKIYo83vawvuDKtP05lt
 lF0l2nKy/QorQtUNRnrWiRshPNEplmKM1yfRXwzfq5CX4Mjox1PM9g1AfMT/Pzbq
 wNPMqtiaNnVzfcSP94MTExKMR5axFgeFsIwuCtPVNDAUEbEFuwKARIeFjCGxYYsr
 81rIKD4lgvJjaHChtE/NzslQysMmr6qiZa17s+NteCwNRJX7U4xN99SO2BXSW7lW
 xGb1ZjdESiBZGzsmuOXqAQw7KWIRS7bQ+s4dewEbqQJomPD3NQUKsRVo1wdWeUqI
 6SI1YsBYEDPiViiohsFyn1Zl3BHgIvypWMW/ChhKtYsmEJapTnJ3SR3a+eafFZ99
 HgCMCF1i0KN1tvMDrLRn
 =qL29
 -----END PGP SIGNATURE-----

Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4

Pull ext4 fixes from Ted Ts'o:
 "Various bug fixes for ext4.  The most serious of them fixes a security
  bug (CVE-2012-4508) which leads to stale data exposure when we have
  fallocate racing against writes to files undergoing delayed
  allocation.  We also have two fixes for the metadata checksum feature,
  the most serious of which can cause the superblock to have a invalid
  checksum after a power failure."

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: Avoid underflow in ext4_trim_fs()
  ext4: Checksum the block bitmap properly with bigalloc enabled
  ext4: fix undefined bit shift result in ext4_fill_flex_info
  ext4: fix metadata checksum calculation for the superblock
  ext4: race-condition protection for ext4_convert_unwritten_extents_endio
  ext4: serialize fallocate with ext4_convert_unwritten_extents
2012-10-23 08:48:26 +03:00
Linus Torvalds
344ba37bdc NFS client bugfixes for Linux 3.7
- Do not call pnfs_return_layout() from an rpciod context
 - nfs4_ds_disconnect can cause Oopses. Kill it...
 - Fix the return value for nfs_callback_start_svc
 - Fix a number of compile warnings
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJQhYQSAAoJEGcL54qWCgDyX7UP/0u2lexD08QtE+rMO4+9PHeI
 6vpTqd6LURhbjZ5JGkThBHU3H8LwGb588SBMzeU6ULk5WituoBki6WCBTEw9TxCN
 4nBr9/7FEyzM/6JKSICeTs/x4ZGS+lHE2M6Q77auUj8nclykNs+oVmYCAyc1k/2J
 bL7Hz+MDLvpPLqcVthMpaSEfuPHOaawkHOD3Iqh7ZqtqcePm6K+GadD9s/pSY8RA
 8sslffyw4oEfSThaHyCuX3kcq3IL1rCez4QL986f/c1Owi8zud1c/63sSBFHpX3h
 cmQSR3R1tWNllIrwU8XD2ypVHM8RK3DFgO+KWyv9c55CCIAMeaviou9YNeWZ40d3
 iptigAjQNNzx9pMCEKtC0G/B4XLkByF9iL0/xEQzCFeX4z34mLYGpw9CpEv6bpKl
 RABPRzvJGyuodZEMxfzFKEr13M4LBV7XG6HjRt+r0ytlHOlkMil6q4sY5OhX62lG
 EwpiWx/52Lf2P7YPgkjEZeaPRq92uIX9oEGUYL1cEmXb7pVNRuPfXYtxyKy1FHXr
 xyBtbCOg/HwhYZdsHeT0C56Id0rFRP5Z+fQKdKNxyLQ9CPhpSZwAgdk/QLVeWedt
 IE5IDQpehq2v8rKyhLu08ny4YHSrUwopw6s9mZLDDFxOW9R1p23u28t50PjRSMao
 tWq7F03fspqbKeNXeB9I
 =bDBm
 -----END PGP SIGNATURE-----

Merge tag 'nfs-for-3.7-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs

Pull NFS client bugfixes from Trond Myklebust:
 - Do not call pnfs_return_layout() from an rpciod context
 - nfs4_ds_disconnect can cause Oopses.  Kill it...
 - Fix the return value for nfs_callback_start_svc
 - Fix a number of compile warnings

* tag 'nfs-for-3.7-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  NFSv4: Fix the return value for nfs_callback_start_svc
  NFSv4.1: Declare osd_pri_2_pnfs_err(), objio_init_read/write to be static
  NFSv4: fs/nfs/nfs4getroot.c needs to include "internal.h"
  NFSv4.1: Use kcalloc() to allocate zeroed arrays instead of kzalloc()
  NFSv4.1: Do not call pnfs_return_layout() from an rpciod context
  NFSv4.1: Kill nfs4_ds_disconnect()
2012-10-23 08:47:38 +03:00
Linus Torvalds
c52f1dd529 regmap: Fix for dependencies for MMIO
Trivial dependency issue, not noticed before as the only user of MMIO
 also needs I2C.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJQfq6dAAoJELSic+t+oim9KJMP/jp9p8GD6VDnZDXJ2BLLk1Kg
 RflVff/rwBlM8mTCK8CFbtpvEYHEMWjWP4i3cEAr8lsJmIe+fEl407SV8cW8CRpO
 iJ97JU/Vf0Juuh5ga03dRdiaaewr/uFWugU1YBKe/FWFRJD7e9L5s+P1s0axhe3N
 n5wDfYuIY6+bqxrkdrzrzSBqRf800jrR9hAsBrnlIi+f5YKvuo3QXi8zkYE/W9et
 U2uHI2ft49EIPJPNszfxn6mF193tbNABXJhn9xFluhEPl368PJCx7Q1zznrYK0va
 RyotNVIn+SLo/k9OeBVzDIX5sMoQMINCazpb3eDlJH+NMZ905KmxL/5J7ESBFSxa
 NKLAlWSNX6c9vfiGXG95P5DxoK1lY1POoDI6PI70Qf1O82e8U5qSZrE2TTcAUjdi
 3MyUDh8Mq2MEYRjjHkrtOJewY1Khz1QsA744o3Gvz9fEsSXOx8VkYdgZdUt+PHCj
 sn+2DWQA6zSK1gZqVWym6Y8nIN1e+ALYnZSGAmnfJcsHdGf3FrUbgUp1CqPmQ1Xz
 t+zscl/lQdypOk3wXkwq/lScRxRRgomeS9lHt3qpGbjuip+QKhJsJTGjcjvmnHFt
 qJOiBoPdK2Gp2hbKRRZlHx1fdt931d2ZHD2jzpZGyZz0wJE09vFhzm4V8NUH3EXu
 HX7i4ibN4DLCCoZ7Z1Im
 =DPiU
 -----END PGP SIGNATURE-----

Merge tag 'regmap-fix-mmio' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap

Pull regmap fix from Mark Brown:
 "regmap: Fix for dependencies for MMIO

  Trivial dependency issue, not noticed before as the only user of MMIO
  also needs I2C."

* tag 'regmap-fix-mmio' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: select REGMAP if REGMAP_MMIO and REGMAP_IRQ enabled
2012-10-23 08:39:38 +03:00
Alexander Duyck
1f4702aa25 ixgbe: Fix possible memory leak in ixgbe_set_ringparam
We were not correctly freeing the temporary rings on error in
ixgbe_set_ring_param.  In order to correct this I am unwinding a number of
changes that were made in order to get things back to the original working
form with modification for the current ring layouts.

This approach has multiple advantages including a smaller memory footprint,
and the fact that the interface is stopped while we are allocating the rings
meaning that there is less potential for some sort of memory corruption on the
ring.

The only disadvantage I see with this approach is that on a Rx allocation
failure we will report an error and only update the Tx rings.  However the
adapter should be fully functional in this state and the likelihood of such
an error is very low.  In addition it is not unreasonable to expect the
user to need to recheck the ring configuration should they experience an
error setting the ring sizes.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-10-22 21:17:19 -07:00
Don Skidmore
de52a12c29 ixgbe: Add function ixgbe_reset_pipeline_82599
This patch adds a function that forces a full pipeline reset.  This
function will be used in following patches to completely reset the PHY
during resets.

Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-10-22 21:17:05 -07:00
Alexander Duyck
505e371808 ixgbe: Drop unnecessary addition from ixgbe_set_rx_buffer_len
We still had some code floating around from the old single buffer receive
path.  As a result we were adding VLAN_HLEN to max_frame although the
resultant value was never used.  Since that is the case we can drop this from
the function.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-10-22 21:16:52 -07:00
Tushar Dave
71a49f777d ixgbe: Correcting small packet padding
Driver pad skb up to 17 bytes because of the HW requirement. However, that code
implementation mess up the skb tail pointer after padding. This patch sets
skb->tail correctly.

Signed-off-by: Tushar Dave <tushar.n.dave@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-10-22 21:16:39 -07:00
Wei Yongjun
51a1f721e2 ixgbe: using is_zero_ether_addr() to simplify the code
Using is_zero_ether_addr() to simplify the code.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-10-22 21:16:26 -07:00
Jacob Keller
1a71ab2491 ixgbe: (PTP) refactor init, cyclecounter and reset
This patch modifies when and where PTP registers and data are set. Previously
a work-around was used inside cyclecounter_start in order to reset some of the
time registers. This patch creates a new ixgbe_ptp_reset specifically for this
purpose. The cyclecounter configuration has trimmed down to only modify what
is necessary. Due to hardware conditions after probe and before open, PTP init
has now moved into the ixgbe_open call. This allows the ptp device name in the
sysfs to be the ethernet device name instead of the MAC address.

The cyclecounter check flag is renamed to PTP_ENABLED and is used to prevent
PTP init from happening when PTP has not been enabled.

CC: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-10-22 21:16:13 -07:00
Emil Tantilov
f8a06c2ceb ixgbe: add WOL support for new subdevice id
This patch adds a subdevice id for new 82599 device. The define is needed
to allow enabling WOL support.

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-10-22 21:15:57 -07:00
Alexander Duyck
56e94095ef ixgbevf: Add VF DCB + SR-IOV support
This change adds support for DCB and SR-IOV from the VF.  With this change
in place the VF will correctly use a traffic class other than 0 in the case
that the PF is configured with the default user priority belonging to a
traffic class other than 0.

Cc: Greg Rose <gregory.v.rose@intel.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-10-22 21:15:35 -07:00
Alexander Duyck
bffb3bc958 ixgbe: Enable support for VF API version 1.1 in the PF.
This change switches on the last few bits for us enabling version 1.1 VF
support in the PF.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Tested-by: Robert Garrett <RobertX.Garrett@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-10-22 21:15:17 -07:00
Alexander Duyck
f591cd9def ixgbe: Add support for GET_QUEUES message to get DCB configuration
This patch addresses several issues in regards to the combination of DCB
and SR-IOV. Specifically it allows us to send information to the VF on
which queues it should be using.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-10-22 21:14:54 -07:00
Alexander Duyck
107d3018ab ixgbe: Add support for tracking the default user priority to SR-IOV
It is necessary to track the default user priority in the PF so that we can
force it upon the VFs.  The motivation behind this is to keep the VFs from
getting access to user priorities meant for things like storage.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-10-22 21:14:32 -07:00
Alexander Duyck
a048b40e0f ixgbe: Add support for IPv6 and UDP to ixgbe_get_headlen
This change adds support for IPv6 and UDP to ixgbe_get_headlen. The
advantage to this is that we can now handle ipv4/UDP, ipv6/TCP, and
ipv6/UDP with a single memcpy instead of having to do them in multiple
pskb_may_pull calls.

A quick bit of testing shows that we increase throughput for a single
session of netperf from 8800Mpbs to about 9300Mpbs in the case of ipv6/TCP.
As such overall ipv6 performance should improve with this change.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Stephen Ko  <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-10-22 21:13:48 -07:00