Commit graph

360,964 commits

Author SHA1 Message Date
Minchan Kim
55dcbbb1bf staging: zram: correct obsolete comment on max_zpage_size
Zram doesn't use xv_malloc any more so it doesn't have
limitation about zobj_header.

Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-22 13:43:46 -07:00
Wei Yongjun
1055d62790 staging: ste_rmi4: use module_i2c_driver to simplify the code
Use the module_i2c_driver() macro to make the code smaller
and a bit simpler.

dpatch engine is used to auto generate this patch.
(https://github.com/weiyj/dpatch)

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-22 13:43:46 -07:00
Bernard Blackham
9e1b6cb9dc staging: usbip: Avoid superfluous set HC_STATE_RUNNING in vhci_start
HC_STATE_RUNNING is already set by the usb core.

Signed-off-by: Bernard Blackham <b-linuxgit@largestprime.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-22 13:38:40 -07:00
Bernard Blackham
3d0a2a22c9 staging: usbip: Don't leak struct file.
usbip takes a reference on a struct file which is passed in via
sysfs.  Previously, this reference was never cleaned up, although
the socket it referred to was.

This patch drops the corresponding reference (found with the
socket's ->file backpointer) instead of just closing the socket.

Signed-off-by: Bernard Blackham <b-linuxgit@largestprime.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-22 13:38:04 -07:00
Tony Lindgren
1d8643dd05 ARM: OMAP3: Fix 3430 legacy mux names for ssi1 signals.
On n900 uart1 pins are not not used for uart, instead they are
used to connect to a cell modem over ssi. Looks like we're
currently missing these signal names for 3430 for some reason,
and only have some of them listed for 3630. Obviously the signals
are there for 3430 if n900 is using them and they are documented
in some TRMs.

Note that these will eventually be replaced by device tree
based pinctrl-single.c driver. But for now these are needed
to verify the SSI pins for devices like Nokia N900.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-10-22 13:37:37 -07:00
Tony Lindgren
24942e8af1 ARM: OMAP2+: Fix location of select PINCTRL
Commit 8f31cefe (ARM: OMAP2+: select PINCTRL in Kconfig)
added select PINCTRL, but accdentally added it to a wrong
location.

We want to select if for ARCH_OMAP2PLUS, not for
ARCH_OMAP2PLUS_TYPICAL.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-10-22 13:37:34 -07:00
Peter Ujfalusi
eef6fcaa42 ARM/dts: omap3: Fix mcbsp2/3 hwmods to be able to probe the drivers for audio
Fixes the following errors:
[    2.318084] omap-mcbsp 49022000.mcbsp: invalid rx DMA channel
[    2.324432] omap-mcbsp 49024000.mcbsp: invalid rx DMA channel

Which is because we failed to link the sidetone hwmod for McBSP2/3. The
missing sidetone hwmod link will prevent omap_device_alloc() to append the
DMA resources since we - accidentally - end up having the same number of
resources provided from DT (IO/IRQ) as we have in hwmod for the McBSP ports
without the ST resources.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Benoit Cousson <b-cousson@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-10-22 13:36:53 -07:00
Bart Westgeest
c7f0089931 staging: usbip: cleanup of comments
Removed commented-out code, obsolete comments, and fixed comment typos.

Signed-off-by: Bart Westgeest <bart@elbrys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-22 13:36:29 -07:00
Bart Westgeest
20960faca5 staging: usbip: make rh_port_disconnect static
Signed-off-by: Bart Westgeest <bart@elbrys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-22 13:36:28 -07:00
Bart Westgeest
36ac9b055f staging: usbip: replaced pointer arithmetic, and strongly type function return.
Replaced pointer arithmetic by using array indexing, and changed
function return type for usbip_alloc_iso_desc_pdu from 'void*' to
'struct usbip_iso_packet_descriptor'.

Signed-off-by: Bart Westgeest <bart@elbrys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-22 13:36:28 -07:00
Devendra Naga
a297ad936e staging: crystalhd: fix a style warning
we dont need braces around a single statement blocks

style WARNINGS:
drivers/staging/crystalhd/crystalhd_cmds.c:311: WARNING: braces {} are not necessary for any arm of this statement

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-22 13:35:37 -07:00
Kevin Hilman
44b1d42a60 ARM: OMAP2: UART: fix console UART mismatched runtime PM status
The runtime PM framework assumes that the hardware state of devices
when initialized is disabled.  For all omap_devices, we idle/disable
device by default.  However, the console uart uses a "no idle" option
during omap_device init in order to allow earlyprintk usage to work
seamlessly during boot.

Because the hardware is left partially enabled after init (whatever
the bootloader settings were), the omap_device should later be fully
initialized (including mux) and the runtime PM framework should be
told that the device is active, and not disabled so that the hardware
state is in sync with runtime PM state.

To fix, after the device has been created/registered, call
omap_device_enable() to finialize init and use pm_runtime_set_active()
to tell the runtime PM core the device is enabled.

Tested on 2420/n810, 3530/Overo, 3530/Beagle, 3730/OveroSTORM,
3730/Beagle-xM, 4460/PandaES.

Suggested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Sourav Poddar <sourav.poddar@ti.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>
2012-10-22 13:35:17 -07:00
Paul Walmsley
856c3c5b28 ARM: OMAP3: PM: apply part of the erratum i582 workaround
On OMAP34xx/35xx, and OMAP36xx chips with ES < 1.2, if the PER
powerdomain goes to OSWR or OFF while CORE stays at CSWR or ON, or if,
upon chip wakeup from OSWR or OFF, the CORE powerdomain goes ON before
PER, the UART3/4 FIFOs and McBSP2/3 SIDETONE memories will be
unusable.  This is erratum i582 in the OMAP36xx Silicon Errata
document.

This patch implements one of several parts of the workaround: the
addition of the wakeup dependency between the PER and WKUP
clockdomains, such that PER will wake up at the same time CORE_L3
does.

This is not a complete workaround.  For it to be complete:

1. the PER powerdomain's next power state must not be set to OSWR or
   OFF if the CORE powerdomain's next power state is set to CSWR or
   ON;

2. the UART3/4 FIFO and McBSP2/3 SIDETONE loopback tests should be run
   if the LASTPOWERSTATEENTERED bits for PER and CORE indicate that
   PER went OFF while CORE stayed on.  If loopback tests fail, then
   those devices will be unusable until PER and CORE can undergo a
   transition from ON to OSWR/OFF and back ON.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Tero Kristo <t-kristo@ti.com>
Cc: Kevin Hilman <khilman@ti.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>
2012-10-22 13:35:17 -07:00
Daniel Vetter
3b5c662e8f drm: extract dp link bw helpers
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-10-22 22:34:47 +02:00
Daniel Vetter
a7c9655fdd drm/i915: use the new dp train delay helpers
Only really required for dp 1.2. I've hoped this would help with some
link training woes I'm fighting, but alas those are only dp 1.1
devices.

Also move a comment that went misplaced in the recent refactorings to
the right spot again.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-10-22 22:34:46 +02:00
Daniel Vetter
1a644cd47c drm: extract dp link train delay functions from radeon
This requires a few changes since that dpcd value is above the
range currently cached by radeon. I've check the dp specs, and
above 0xf there's a big gap and nothing that looks like we should
cache it while a given device is plugged in. It's also the same value
that i915.ko uses.

Hence extend the various dpcd arrays in the radeon driver, use
proper symbolic constants where applicable (one place overallocated
the dpcd array to 25 bytes). Then also drop the rd_interval cache -
radeon_dp_link_train_init re-reads the dpcd block, so the values we'll
consume in train_cr and train_ce will always be fresh.

To avoid needless diff-churn, #define the old size of dpcd as the new
one and keep it around.

v2: Alex Deucher noticed one place where I've forgotten to replace 8
with DP_RECEIVER_CAP_SIZE.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-10-22 22:34:46 +02:00
Daniel Vetter
0f037bdee1 drm: extract helpers to compute new training values from sink request
Safe for the minor difference that the intel versions get an offset
into the link_status as an argument, both are the same again.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-10-22 22:34:45 +02:00
Daniel Vetter
01916270b8 drm: dp helper: extract drm_dp_clock_recovery_ok
radeon and intel use the exact same definition.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Dave Airlie <airlied@gmail.com>

v2: Kill 2 more helpers in intel_dp.c that I've missed.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-10-22 22:34:37 +02:00
Wei Yongjun
605fba82a2 staging: r8712u: fix potential NULL pointer dereference in r871x_wps_start()
The dereference should be moved below the NULL test.

dpatch engine is used to auto generate this patch.
(https://github.com/weiyj/dpatch)

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-22 13:30:01 -07:00
Wei Yongjun
a5e0f69c98 Staging: ced1401: fix missing unlock on error in FreeCircBlock()
Add the missing unlock on the error handle path in function
FreeCircBlock().

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-22 13:28:43 -07:00
Devendra Naga
7d82c65f04 staging: ced1401: remove kernel version ifdef 's
We dont need these kernel versioning checks anyways.

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-22 13:28:13 -07:00
Devendra Naga
0965be3964 staging: ced1401: fix some style warnings
this fixes:

comments to in kernel comment style
the opening brace of if statement must be beside the if not below
to it

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-22 13:28:13 -07:00
Devendra Naga
ff549e4772 staging: ced1401: remove an obvious commit about the minor number
in disconnect we assign the device minor number from the interface
pointer to the localvarible minor, and then print it at the end,

this code seems self explanatory so remove the comment of assigning
the minor number to a local variable.

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-22 13:28:12 -07:00
Lan Tianyu
27c411c95a usb/xhci: Remove (__force__ __u16) before assigning DeviceRemovable and assign directly.
Struct usb_hub_descriptor.ss.DeviceRemovable has been defined as __le16
and (__force__ __u16) doesn't need.

Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2012-10-22 13:26:48 -07:00
Lan Tianyu
170ed80734 usb/xhci: release xhci->lock during turning on/off usb port's acpi power resource and checking the existence of port's power resource
When setting usb port's acpi power resource, there will be some xhci hub requests.
This will cause dead lock since xhci->lock has been held before setting acpi power
resource in the xhci_hub_control(). The usb_acpi_power_manageable() function might
fall into sleep so release xhci->lock before invoking it.

Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2012-10-22 13:26:48 -07:00
Wei Yongjun
96a031a2da Staging: vt6655: fix missing unlock on error in vCommandTimer()
Add the missing unlock on the error handle path in function
vCommandTimer.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-22 13:26:41 -07:00
Malcolm Priestley
02560efe69 staging: vt6656: [BUG] PIPEnsSendBulkOut free bBoolInUse
Eventually, when there is enough errors we run out of free TX urbs and
connection stalls.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-22 13:26:41 -07:00
Dan Carpenter
c25015c118 Staging: vt6655-6: shift wrap in hostap_set_encryption()
abySeq is an unsigned char so shifting more than 31 bits will lead to a
shift wrapping bug.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-22 13:26:40 -07:00
Dan Carpenter
ff4573a7af Staging: vt6655-6: shift wrap buf in s_vFillTxKey()
byKeyIndex is an unsigned char between 0 and 0xf.  If it is any value
higher than 1, then we will hit an integer wrap issue here.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-22 13:26:40 -07:00
Malcolm Priestley
f20fbdf829 staging: vt6656: Keep firmware loading local and release firware.
Firmware is retained unreleased for the entire duration of the
driver.

When done release firmware and if the need be request firmware again.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-22 13:26:40 -07:00
Malcolm Priestley
ab1dd99631 staging: vt6656: [BUG] out of bound array reference in RFbSetPower.
Calling RFbSetPower with uCH zero value will cause out of bound array reference.

This causes 64 bit kernels to oops on boot.

Note: Driver does not function on 64 bit kernels and should be
blacklisted on them.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-22 13:26:40 -07:00
Daniel Vetter
1ffdff134e drm: dp helper: extract drm_dp_channel_eq_ok
radeon and intel use the exact same definition.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-10-22 22:23:36 +02:00
Arve Hjønnevåg
585650dcec Staging: android: binder: Allow using highmem for binder buffers
The default kernel mapping for the pages allocated for the binder
buffers is never used. Set the __GFP_HIGHMEM flag when allocating
these pages so we don't needlessly use low memory pages that may
be required elsewhere.

Signed-off-by: Arve Hjønnevåg <arve@android.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-22 13:23:19 -07:00
Arve Hjønnevåg
675d66b0ed Staging: android: binder: Fix memory leak on thread/process exit
If a thread or process exited while a reply, one-way transaction or
death notification was pending, the struct holding the pending work
was leaked.

Signed-off-by: Arve Hjønnevåg <arve@android.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-22 13:23:19 -07:00
Daniel Vetter
00ae9a456d drm: rename drm_dp_i2c_helper.c to drm_dp_helper.c
I want to move some dp link training helpers into this place, so in
the future this won't be just about i2c any longer.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-10-22 22:20:31 +02:00
Arve Hjønnevåg
975a1ac9a9 Staging: android: binder: Add some tracepoints
Add tracepoints:
- ioctl entry and exit
- Main binder lock: lock, locked and unlock
- Command and return buffer opcodes
- Transaction: create and receive
- Transaction buffer: create and free
- Object and file descriptor transfer
- binder_update_page_range

Signed-off-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-22 13:04:29 -07:00
Arve Hjønnevåg
89334ab4d3 Staging: android: binder: Add some missing binder_stat_br calls
Cached thread return errors, death notifications and new looper
requests were not included in the stats.

Signed-off-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-22 13:04:29 -07:00
Anna Leuschner
386bc35a2d vfs: fix: don't increase bio_slab_max if krealloc() fails
Without the patch, bio_slab_max, representing bio_slabs capacity, is increased before krealloc() of bio_slabs. If krealloc() fails, bio_slab_max is too high. Fix that by only updating bio_slab_max if krealloc() is successful.

Signed-off-by: Anna Leuschner <anna.m.leuschner@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-10-22 22:00:26 +02:00
Jun'ichi Nomura
65c77fd9e8 blkcg: stop iteration early if root_rl is the only request list
__blk_queue_next_rl() finds next request list based on blkg_list
while skipping root_blkg in the list.
OTOH, root_rl is special as it may exist even without root_blkg.

Though the later part of the function handles such a case correctly,
exiting early is good for readability of the code.

Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Cc: Tejun Heo <tj@kernel.org>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-10-22 22:00:26 +02:00
Jun'ichi Nomura
65635cbc37 blkcg: Fix use-after-free of q->root_blkg and q->root_rl.blkg
blk_put_rl() does not call blkg_put() for q->root_rl because we
don't take request list reference on q->root_blkg.
However, if root_blkg is once attached then detached (freed),
blk_put_rl() is confused by the bogus pointer in q->root_blkg.

For example, with !CONFIG_BLK_DEV_THROTTLING &&
CONFIG_CFQ_GROUP_IOSCHED,
switching IO scheduler from cfq to deadline will cause system stall
after the following warning with 3.6:

> WARNING: at /work/build/linux/block/blk-cgroup.h:250
> blk_put_rl+0x4d/0x95()
> Modules linked in: bridge stp llc sunrpc acpi_cpufreq freq_table mperf
> ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4
> Pid: 0, comm: swapper/0 Not tainted 3.6.0 #1
> Call Trace:
>  <IRQ>  [<ffffffff810453bd>] warn_slowpath_common+0x85/0x9d
>  [<ffffffff810453ef>] warn_slowpath_null+0x1a/0x1c
>  [<ffffffff811d5f8d>] blk_put_rl+0x4d/0x95
>  [<ffffffff811d614a>] __blk_put_request+0xc3/0xcb
>  [<ffffffff811d71a3>] blk_finish_request+0x232/0x23f
>  [<ffffffff811d76c3>] ? blk_end_bidi_request+0x34/0x5d
>  [<ffffffff811d76d1>] blk_end_bidi_request+0x42/0x5d
>  [<ffffffff811d7728>] blk_end_request+0x10/0x12
>  [<ffffffff812cdf16>] scsi_io_completion+0x207/0x4d5
>  [<ffffffff812c6fcf>] scsi_finish_command+0xfa/0x103
>  [<ffffffff812ce2f8>] scsi_softirq_done+0xff/0x108
>  [<ffffffff811dcea5>] blk_done_softirq+0x8d/0xa1
>  [<ffffffff810915d5>] ?
>  generic_smp_call_function_single_interrupt+0x9f/0xd7
>  [<ffffffff8104cf5b>] __do_softirq+0x102/0x213
>  [<ffffffff8108a5ec>] ? lock_release_holdtime+0xb6/0xbb
>  [<ffffffff8104d2b4>] ? raise_softirq_irqoff+0x9/0x3d
>  [<ffffffff81424dfc>] call_softirq+0x1c/0x30
>  [<ffffffff81011beb>] do_softirq+0x4b/0xa3
>  [<ffffffff8104cdb0>] irq_exit+0x53/0xd5
>  [<ffffffff8102d865>] smp_call_function_single_interrupt+0x34/0x36
>  [<ffffffff8142486f>] call_function_single_interrupt+0x6f/0x80
>  <EOI>  [<ffffffff8101800b>] ? mwait_idle+0x94/0xcd
>  [<ffffffff81018002>] ? mwait_idle+0x8b/0xcd
>  [<ffffffff81017811>] cpu_idle+0xbb/0x114
>  [<ffffffff81401fbd>] rest_init+0xc1/0xc8
>  [<ffffffff81401efc>] ? csum_partial_copy_generic+0x16c/0x16c
>  [<ffffffff81cdbd3d>] start_kernel+0x3d4/0x3e1
>  [<ffffffff81cdb79e>] ? kernel_init+0x1f7/0x1f7
>  [<ffffffff81cdb2dd>] x86_64_start_reservations+0xb8/0xbd
>  [<ffffffff81cdb3e3>] x86_64_start_kernel+0x101/0x110

This patch clears q->root_blkg and q->root_rl.blkg when root blkg
is destroyed.

Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-10-22 22:00:26 +02:00
YAMANE Toshiaki
509f3f78c9 staging/comedi: Use pr_ or dev_ printks in drivers/dt9812.c
fixed below checkpatch warnings.
- WARNING: Prefer netdev_err(netdev, ... then dev_err(dev, ... then pr_err(...  to printk(KERN_ERR ...
- WARNING: Prefer netdev_info(netdev, ... then dev_info(dev, ... then pr_info(...  to printk(KERN_INFO ...

and added pr_fmt.

Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-22 12:53:03 -07:00
YAMANE Toshiaki
e209939f31 staging/comedi: Use dev_ printks in drivers/ii_pci20kc.c
fixed below checkpatch warnings.
- WARNING: Prefer netdev_warn(netdev, ... then dev_warn(dev, ... then pr_warn(...  to printk(KERN_WARNING ...
- WARNING: Prefer netdev_info(netdev, ... then dev_info(dev, ... then pr_info(...  to printk(KERN_INFO ...

Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-22 12:47:58 -07:00
YAMANE Toshiaki
66ae18fa13 staging/comedi: Use dev_ printks in drivers/ni_pcimio.c
fixed below checkpatch warning.
- WARNING: Prefer netdev_warn(netdev, ... then dev_warn(dev, ... then pr_warn(...  to printk(KERN_WARNING ...

Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-22 12:47:57 -07:00
YAMANE Toshiaki
351be7c9fa staging/comedi: Use dev_ printks in drivers/ni_daq_dio24.c
fixed below checkpatch warning.
- WARNING: Prefer netdev_info(netdev, ... then dev_info(dev, ... then pr_info(...  to printk(KERN_INFO ...

Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-22 12:47:57 -07:00
YAMANE Toshiaki
3818a14271 staging/comedi: Use dev_ printks in drivers/usbdux.c
fixed below checkpatch warning.
- WARNING: Prefer netdev_err(netdev, ... then dev_err(dev, ... then pr_err(...  to printk(KERN_ERR ...

Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-22 12:47:57 -07:00
YAMANE Toshiaki
4370e80f4d staging/comedi: Use dev_ printks in rtd520.c
fixed below checkpatch warning.
-Prefer netdev_info(netdev, ... then dev_info(dev, ... then pr_info(...  to printk(KERN_INFO ...

Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-22 12:47:57 -07:00
YAMANE Toshiaki
ce3ed9f0ce staging/comedi: Use dev_ printks in drivers/quatech_daqp_cs.c
fixed below checkpatch warnings.
- WARNING: Prefer netdev_info(netdev, ... then dev_info(dev, ... then pr_info(...  to printk(KERN_INFO ...
- WARNING: Prefer netdev_warn(netdev, ... then dev_warn(dev, ... then pr_warn(...  to printk(KERN_WARNING ...
- WARNING: Prefer netdev_err(netdev, ... then dev_err(dev, ... then pr_err(...  to printk(KERN_ERR ...
- WARNING: Prefer netdev_info(netdev, ... then dev_info(dev, ... then pr_info(...  to printk(KERN_INFO ...
- WARNING: Prefer netdev_notice(netdev, ... then dev_notice(dev, ... then pr_notice(...  to printk(KERN_NOTICE ...

and added pr_fmt.

Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-22 12:47:57 -07:00
YAMANE Toshiaki
89a3f111a0 staging/comedi: Use dev_ printks in drivers/adl_pci8164.c
fixed below checkpatch warning.
- WARNING: Prefer netdev_dbg(netdev, ... then dev_dbg(dev, ... then pr_debug(...  to printk(KERN_DEBUG ...

Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-22 12:47:57 -07:00
YAMANE Toshiaki
a74b5c515c staging/comedi: Use dev_ printks in drivers/me_daq.c
fixed below checkpatch warnings.
- WARNING: Prefer netdev_err(netdev, ... then dev_err(dev, ... then pr_err(...  to printk(KERN_ERR ...
- WARNING: quoted string split across lines

Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-22 12:47:57 -07:00
YAMANE Toshiaki
49e8e44bcf staging/comedi: Use dev_ printks in kcomedilib/kcomedilib_main.c
fixed below checkpatch warning.
- WARNING: Prefer netdev_err(netdev, ... then dev_err(dev, ... then pr_err(...  to printk(KERN_ERR ...

Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-22 12:47:56 -07:00