With the proliferation of large folios for file-backed memory, and more
recently the introduction of multi-size THP for anonymous memory, it is
becoming useful to be able to see exactly how large folios are mapped into
processes. For some architectures (e.g. arm64), if most memory is mapped
using contpte-sized and -aligned blocks, TLB usage can be optimized so
it's useful to see where these requirements are and are not being met.
thpmaps is a Python utility that reads /proc/<pid>/smaps,
/proc/<pid>/pagemap and /proc/kpageflags to print information about how
transparent huge pages (both file and anon) are mapped to a specified
process or cgroup. It aims to help users debug and optimize their
workloads. In future we may wish to introduce stats directly into the
kernel (e.g. smaps or similar), but for now this provides a short term
solution without the need to introduce any new ABI.
Run with help option for a full listing of the arguments:
# ./thpmaps --help
--8<--
usage: thpmaps [-h] [--pid pid | --cgroup path] [--rollup]
[--cont size[KMG]] [--inc-smaps] [--inc-empty]
[--periodic sleep_ms]
Prints information about how transparent huge pages are mapped, either
system-wide, or for a specified process or cgroup.
When run with --pid, the user explicitly specifies the set of pids to
scan. e.g. "--pid 10 [--pid 134 ...]". When run with --cgroup, the user
passes either a v1 or v2 cgroup and all pids that belong to the cgroup
subtree are scanned. When run with neither --pid nor --cgroup, the full
set of pids on the system is gathered from /proc and scanned as if the
user had provided "--pid 1 --pid 2 ...".
A default set of statistics is always generated for THP mappings.
However, it is also possible to generate additional statistics for
"contiguous block mappings" where the block size is user-defined.
Statistics are maintained independently for anonymous and file-backed
(pagecache) memory and are shown both in kB and as a percentage of either
total anonymous or total file-backed memory as appropriate.
THP Statistics
--------------
Statistics are always generated for fully- and contiguously-mapped THPs
whose mapping address is aligned to their size, for each <size> supported
by the system. Separate counters describe THPs mapped by PTE vs those
mapped by PMD. (Although note a THP can only be mapped by PMD if it is
PMD-sized):
- anon-thp-pte-aligned-<size>kB
- file-thp-pte-aligned-<size>kB
- anon-thp-pmd-aligned-<size>kB
- file-thp-pmd-aligned-<size>kB
Similarly, statistics are always generated for fully- and contiguously-
mapped THPs whose mapping address is *not* aligned to their size, for each
<size> supported by the system. Due to the unaligned mapping, it is
impossible to map by PMD, so there are only PTE counters for this case:
- anon-thp-pte-unaligned-<size>kB
- file-thp-pte-unaligned-<size>kB
Statistics are also always generated for mapped pages that belong to a THP
but where the is THP is *not* fully- and contiguously- mapped. These
"partial" mappings are all counted in the same counter regardless of the
size of the THP that is partially mapped:
- anon-thp-pte-partial
- file-thp-pte-partial
Contiguous Block Statistics
---------------------------
An optional, additional set of statistics is generated for every
contiguous block size specified with `--cont <size>`. These statistics
show how much memory is mapped in contiguous blocks of <size> and also
aligned to <size>. A given contiguous block must all belong to the same
THP, but there is no requirement for it to be the *whole* THP. Separate
counters describe contiguous blocks mapped by PTE vs those mapped by PMD:
- anon-cont-pte-aligned-<size>kB
- file-cont-pte-aligned-<size>kB
- anon-cont-pmd-aligned-<size>kB
- file-cont-pmd-aligned-<size>kB
As an example, if monitoring 64K contiguous blocks (--cont 64K), there are
a number of sources that could provide such blocks: a fully- and
contiguously-mapped 64K THP that is aligned to a 64K boundary would
provide 1 block. A fully- and contiguously-mapped 128K THP that is
aligned to at least a 64K boundary would provide 2 blocks. Or a 128K THP
that maps its first 100K, but contiguously and starting at a 64K boundary
would provide 1 block. A fully- and contiguously-mapped 2M THP would
provide 32 blocks. There are many other possible permutations.
options:
-h, --help show this help message and exit
--pid pid Process id of the target process. Maybe issued
multiple times to scan multiple processes. --pid
and --cgroup are mutually exclusive. If neither
are provided, all processes are scanned to
provide system-wide information.
--cgroup path Path to the target cgroup in sysfs. Iterates
over every pid in the cgroup and its children.
--pid and --cgroup are mutually exclusive. If
neither are provided, all processes are scanned
to provide system-wide information.
--rollup Sum the per-vma statistics to provide a summary
over the whole system, process or cgroup.
--cont size[KMG] Adds stats for memory that is mapped in
contiguous blocks of <size> and also aligned to
<size>. May be issued multiple times to track
multiple sized blocks. Useful to infer e.g.
arm64 contpte and hpa mappings. Size must be a
power-of-2 number of pages.
--inc-smaps Include all numerical, additive
/proc/<pid>/smaps stats in the output.
--inc-empty Show all statistics including those whose value
is 0.
--periodic sleep_ms Run in a loop, polling every sleep_ms
milliseconds.
Requires root privilege to access pagemap and kpageflags.
--8<--
Example command to summarise fully and partially mapped THPs and 64K
contiguous blocks over all VMAs in all processes in the system
(--inc-empty forces printing stats that are 0):
# ./thpmaps --cont 64K --rollup --inc-empty
--8<--
anon-thp-pmd-aligned-2048kB: 139264 kB ( 6%)
file-thp-pmd-aligned-2048kB: 0 kB ( 0%)
anon-thp-pte-aligned-16kB: 0 kB ( 0%)
anon-thp-pte-aligned-32kB: 0 kB ( 0%)
anon-thp-pte-aligned-64kB: 72256 kB ( 3%)
anon-thp-pte-aligned-128kB: 0 kB ( 0%)
anon-thp-pte-aligned-256kB: 0 kB ( 0%)
anon-thp-pte-aligned-512kB: 0 kB ( 0%)
anon-thp-pte-aligned-1024kB: 0 kB ( 0%)
anon-thp-pte-aligned-2048kB: 0 kB ( 0%)
anon-thp-pte-unaligned-16kB: 0 kB ( 0%)
anon-thp-pte-unaligned-32kB: 0 kB ( 0%)
anon-thp-pte-unaligned-64kB: 0 kB ( 0%)
anon-thp-pte-unaligned-128kB: 0 kB ( 0%)
anon-thp-pte-unaligned-256kB: 0 kB ( 0%)
anon-thp-pte-unaligned-512kB: 0 kB ( 0%)
anon-thp-pte-unaligned-1024kB: 0 kB ( 0%)
anon-thp-pte-unaligned-2048kB: 0 kB ( 0%)
anon-thp-pte-partial: 63232 kB ( 3%)
file-thp-pte-aligned-16kB: 809024 kB (47%)
file-thp-pte-aligned-32kB: 43168 kB ( 3%)
file-thp-pte-aligned-64kB: 98496 kB ( 6%)
file-thp-pte-aligned-128kB: 17536 kB ( 1%)
file-thp-pte-aligned-256kB: 0 kB ( 0%)
file-thp-pte-aligned-512kB: 0 kB ( 0%)
file-thp-pte-aligned-1024kB: 0 kB ( 0%)
file-thp-pte-aligned-2048kB: 0 kB ( 0%)
file-thp-pte-unaligned-16kB: 21712 kB ( 1%)
file-thp-pte-unaligned-32kB: 704 kB ( 0%)
file-thp-pte-unaligned-64kB: 896 kB ( 0%)
file-thp-pte-unaligned-128kB: 44928 kB ( 3%)
file-thp-pte-unaligned-256kB: 0 kB ( 0%)
file-thp-pte-unaligned-512kB: 0 kB ( 0%)
file-thp-pte-unaligned-1024kB: 0 kB ( 0%)
file-thp-pte-unaligned-2048kB: 0 kB ( 0%)
file-thp-pte-partial: 9252 kB ( 1%)
anon-cont-pmd-aligned-64kB: 139264 kB ( 6%)
file-cont-pmd-aligned-64kB: 0 kB ( 0%)
anon-cont-pte-aligned-64kB: 100672 kB ( 4%)
file-cont-pte-aligned-64kB: 161856 kB ( 9%)
--8<--
Link: https://lkml.kernel.org/r/20240116141235.960842-1-ryan.roberts@arm.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Tested-by: Barry Song <v-songbaohua@oppo.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: William Kucharski <william.kucharski@oracle.com>
Cc: Zenghui Yu <yuzenghui@huawei.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The core-api create_workqueue is deprecated, this patch replaces the
create_workqueue with alloc_workqueue. The previous implementation
workqueue of zswap was a bounded workqueue, this patch uses
alloc_workqueue() to create an unbounded workqueue. The WQ_UNBOUND
attribute is desirable making the workqueue not localized to a specific
cpu so that the scheduler is free to exercise improvisations in any
demanding scenarios for offloading cpu time slices for workqueues. For
example if any other workqueues of the same primary cpu had to be served
which are WQ_HIGHPRI and WQ_CPU_INTENSIVE. Also Unbound workqueue happens
to be more efficient in a system during memory pressure scenarios in
comparison to a bounded workqueue.
shrink_wq = alloc_workqueue("zswap-shrink",
WQ_UNBOUND|WQ_MEM_RECLAIM, 1);
Overall the change suggested in this patch should be seamless and does not
alter the existing behavior, other than the improvisation to be an
unbounded workqueue.
Link: https://lkml.kernel.org/r/20240116133145.12454-1-debug.penguin32@gmail.com
Signed-off-by: Ronald Monthero <debug.penguin32@gmail.com>
Acked-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Chris Li <chrisl@kernel.org>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
A while loop is used to adjust the new_order to be lower than the
ra->size. ilog2 could be used to do the same instead of using a loop.
ilog2 typically resolves to a bit scan reverse instruction. This is
particularly useful when ra->size is smaller than the 2^new_order as it
resolves in one instruction instead of looping to find the new_order.
No functional changes.
Link: https://lkml.kernel.org/r/20240115102523.2336742-1-kernel@pankajraghav.com
Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In order to ease the transition towards a state of absolute
paranoia where all RES0/RES1 bits gets checked against what
KVM know of them, make the checks optional and guarded by a
config symbol (CONFIG_KVM_ARM64_RES_BITS_PARANOIA) default to n.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/kvm/87frxka7ud.wl-maz@kernel.org/
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZddOmwAKCRCRxhvAZXjc
oq1lAQDus0SGgwuwArdHtbbVj+gTs4s5XKvuGI6mqRiLvgvTzwD/TTNnOqJjWacS
on7XxDHgnjbMR2r90W/MuyPPjtAPkgA=
=i2E/
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.8-rc6.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Fix a memory leak in cachefiles
- Restrict aio cancellations to I/O submitted through the aio
interfaces as this is otherwise causing issues for I/O submitted
via io_uring
- Increase buffer for afs volume status to avoid overflow
- Fix a missing zero-length check in unbuffered writes in the
netfs library. If generic_write_checks() returns zero make
netfs_unbuffered_write_iter() return right away
- Prevent a leak in i_dio_count caused by netfs_begin_read() operating
past i_size. It will return early and leave i_dio_count incremented
- Account for ipv4 addresses as well as ipv6 addresses when processing
incoming callbacks in afs
* tag 'vfs-6.8-rc6.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs/aio: Restrict kiocb_set_cancel_fn() to I/O submitted via libaio
afs: Increase buffer size in afs_update_volume_status()
afs: Fix ignored callbacks over ipv4
cachefiles: fix memory leak in cachefiles_add_cache()
netfs: Fix missing zero-length check in unbuffered write
netfs: Fix i_dio_count leak on DIO read past i_size
The 'if' condition for the SM8[45]50 GPU SMMU is too large,
add the other compatible strings to the condition to only
allow the clocks for the GPU SMMU nodes.
Fixes: 4fff78dc24 ("dt-bindings: arm-smmu: Document SM8[45]50 GPU SMMU")
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240216-topic-sm8650-gpu-v3-2-eb1f4b86d8d3@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
Current release - regressions:
- af_unix: fix another unix GC hangup
Previous releases - regressions:
- core: fix a possible AF_UNIX deadlock
- bpf: fix NULL pointer dereference in sk_psock_verdict_data_ready()
- netfilter: nft_flow_offload: release dst in case direct xmit path is used
- bridge: switchdev: ensure MDB events are delivered exactly once
- l2tp: pass correct message length to ip6_append_data
- dccp/tcp: unhash sk from ehash for tb2 alloc failure after check_estalblished()
- tls: fixes for record type handling with PEEK
- devlink: fix possible use-after-free and memory leaks in devlink_init()
Previous releases - always broken:
- bpf: fix an oops when attempting to read the vsyscall
page through bpf_probe_read_kernel
- sched: act_mirred: use the backlog for mirred ingress
- netfilter: nft_flow_offload: fix dst refcount underflow
- ipv6: sr: fix possible use-after-free and null-ptr-deref
- mptcp: fix several data races
- phonet: take correct lock to peek at the RX queue
Misc:
- handful of fixes and reliability improvements for selftests
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=eUOc
-----END PGP SIGNATURE-----
Merge tag 'net-6.8.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bpf and netfilter.
Current release - regressions:
- af_unix: fix another unix GC hangup
Previous releases - regressions:
- core: fix a possible AF_UNIX deadlock
- bpf: fix NULL pointer dereference in sk_psock_verdict_data_ready()
- netfilter: nft_flow_offload: release dst in case direct xmit path
is used
- bridge: switchdev: ensure MDB events are delivered exactly once
- l2tp: pass correct message length to ip6_append_data
- dccp/tcp: unhash sk from ehash for tb2 alloc failure after
check_estalblished()
- tls: fixes for record type handling with PEEK
- devlink: fix possible use-after-free and memory leaks in
devlink_init()
Previous releases - always broken:
- bpf: fix an oops when attempting to read the vsyscall page through
bpf_probe_read_kernel
- sched: act_mirred: use the backlog for mirred ingress
- netfilter: nft_flow_offload: fix dst refcount underflow
- ipv6: sr: fix possible use-after-free and null-ptr-deref
- mptcp: fix several data races
- phonet: take correct lock to peek at the RX queue
Misc:
- handful of fixes and reliability improvements for selftests"
* tag 'net-6.8.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (72 commits)
l2tp: pass correct message length to ip6_append_data
net: phy: realtek: Fix rtl8211f_config_init() for RTL8211F(D)(I)-VD-CG PHY
selftests: ioam: refactoring to align with the fix
Fix write to cloned skb in ipv6_hop_ioam()
phonet/pep: fix racy skb_queue_empty() use
phonet: take correct lock to peek at the RX queue
net: sparx5: Add spinlock for frame transmission from CPU
net/sched: flower: Add lock protection when remove filter handle
devlink: fix port dump cmd type
net: stmmac: Fix EST offset for dwmac 5.10
tools: ynl: don't leak mcast_groups on init error
tools: ynl: make sure we always pass yarg to mnl_cb_run
net: mctp: put sock on tag allocation failure
netfilter: nf_tables: use kzalloc for hook allocation
netfilter: nf_tables: register hooks last when adding new chain/flowtable
netfilter: nft_flow_offload: release dst in case direct xmit path is used
netfilter: nft_flow_offload: reset dst in route object after setting up flow
netfilter: nf_tables: set dormant flag on hook register failure
selftests: tls: add test for peeking past a record of a different type
selftests: tls: add test for merging of same-type control messages
...
When CONFIG_WQ_CPU_INTENSIVE_REPORT is set, the kernel will report
the work functions which violate the intensive_threshold_us repeatedly.
And now, only when the violate times exceed 4 and is a power of 2,
the kernel warning could be triggered.
However, sometimes, even if a long work execution time occurs only once,
it may cause other work to be delayed for a long time. This may also
cause some problems sometimes.
In order to freely control the threshold of warninging, a boot argument
is added so that the user can control the warning threshold to be printed.
At the same time, keep the exponential backoff to prevent reporting too much.
By default, the warning threshold is 4.
tj: Updated kernel-parameters.txt description.
Signed-off-by: Xuewen Yan <xuewen.yan@unisoc.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Request can be NULL if no guilty request was identified so simply use
engine->i915 instead.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: d50892a955 ("drm/i915: switch from drm_debug_printer() to device specific drm_dbg_printer()")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Luca Coelho <luciano.coelho@intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20240219131423.1854991-1-tvrtko.ursulin@linux.intel.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
On Tegra186, secure world applications may need to access host1x
during suspend/resume, and rely on the kernel to keep Host1x out
of reset during the suspend cycle. As such, as a quirk,
skip asserting Host1x's reset on Tegra186.
We don't need to keep the clocks enabled, as BPMP ensures the clock
stays on while Host1x is being used. On newer SoC's, the reset line
is inaccessible, so there is no need for the quirk.
Fixes: b7c00cdf6d ("gpu: host1x: Enable system suspend callbacks")
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240222010517.1573931-1-cyndis@kapsi.fi
The block zone code does not use RB-tree. So remove the include of
linux/rbtree.h as it is not needed.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240222131724.1803520-2-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Device mapper may create a non-zoned mapped device out of a zoned device
(e.g., the dm-zoned target). In such case, some queue limit such as the
max_zone_append_sectors and zone_write_granularity endup being non zero
values for a block device that is not zoned. Avoid this by clearing
these limits in blk_stack_limits() when the stacked zoned limit is
false.
Fixes: 3093a47972 ("block: inherit the zoned characteristics in blk_stack_limits")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240222131724.1803520-1-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Inside tegra_fb_create(), drm_gem_object_lookup() increments ref count of
the found object. But if the following size check fails then the last
found object's ref count should be put there as the unreferencing loop
can't detect this situation.
Found by Linux Verification Center (linuxtesting.org).
Fixes: de2ba664c3 ("gpu: host1x: drm: Add memory manager and fb")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231215093356.12067-1-pchelkin@ispras.ru
Don't set power state flag when system enter runtime suspend,
or it may cause runtime resume failure issue.
Fixes: 3a9626c816 ("drm/amd: Stop evicting resources on APUs in suspend")
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[Why]
Currently there is an error while translating input clock sates into
output clock states. The highest fclk setting from output sates is
being dropped because of this error.
[How]
For dcn35 and dcn351, make output_states equal to input states.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Swapnil Patel <swapnil.patel@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes potential null pointer dereference warnings in the
dc_dmub_srv_cmd_list_queue_execute() and dc_dmub_srv_is_hw_pwr_up()
functions.
In both functions, the 'dc_dmub_srv' variable was being dereferenced
before it was checked for null. This could lead to a null pointer
dereference if 'dc_dmub_srv' is null. The fix is to check if
'dc_dmub_srv' is null before dereferencing it.
Thus moving the null checks for 'dc_dmub_srv' to the beginning of the
functions to ensure that 'dc_dmub_srv' is not null when it is
dereferenced.
Found by smatch & thus fixing the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/dc_dmub_srv.c:133 dc_dmub_srv_cmd_list_queue_execute() warn: variable dereferenced before check 'dc_dmub_srv' (see line 128)
drivers/gpu/drm/amd/amdgpu/../display/dc/dc_dmub_srv.c:1167 dc_dmub_srv_is_hw_pwr_up() warn: variable dereferenced before check 'dc_dmub_srv' (see line 1164)
Fixes: 028bac5834 ("drm/amd/display: decouple dmcub execution to reduce lock granularity")
Fixes: 65138eb72e ("drm/amd/display: Add DCN35 DMUB")
Cc: JinZe.Xu <jinze.xu@amd.com>
Cc: Hersen Wu <hersenxs.wu@amd.com>
Cc: Josip Pavic <josip.pavic@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Qingqing Zhuo <Qingqing.Zhuo@amd.com>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- While working on the ring buffer I noticed that the counter used
for knowing where the end of the data is on a sub-buffer was not
a full "int" but just 20 bits. It was masked out to 0xfffff.
With the new code that allows the user to change the size of the
sub-buffer, it is theoretically possible to ask for a size
bigger than 2^20. If that happens, unexpected results may
occur as there's no code checking if the counter overflowed the
20 bits of the write mask. There are other checks to make sure
events fit in the sub-buffer, but if the sub-buffer itself is
too big, that is not checked.
Add a check in the resize of the sub-buffer to make sure that it
never goes beyond the size of the counter that holds how much
data is on it.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZdaf+RQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qjEIAQDpsvHqUFNoG5fkRlWr2U0hNl5M6zLI
xTf2mWoG/h8bwQD+NfiRC2UrD5EaubO15z0z6MxScOl1H9X+iI7WVwZkqQ8=
=txOr
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fix from Steven Rostedt:
- While working on the ring buffer I noticed that the counter used for
knowing where the end of the data is on a sub-buffer was not a full
"int" but just 20 bits. It was masked out to 0xfffff.
With the new code that allows the user to change the size of the
sub-buffer, it is theoretically possible to ask for a size bigger
than 2^20. If that happens, unexpected results may occur as there's
no code checking if the counter overflowed the 20 bits of the write
mask. There are other checks to make sure events fit in the
sub-buffer, but if the sub-buffer itself is too big, that is not
checked.
Add a check in the resize of the sub-buffer to make sure that it
never goes beyond the size of the counter that holds how much data is
on it.
* tag 'trace-v6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ring-buffer: Do not let subbuf be bigger than write mask
[Why]
The old asic only have 1 pwrseq hw.
We don't need to map the diginst to pwrseq inst in old asic.
[How]
1. Only mapping dig to pwrseq for new asic.
2. Move mapping function into dcn specific panel control component
Cc: Stable <stable@vger.kernel.org> # v6.6+
Cc: Mario Limonciello <mario.limonciello@amd.com>
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3122
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Lewis Huang <lewis.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Observe error message "Can't retrieve aconnector in hpd_rx_irq_offload_work"
when boot up with a mst tbt4 dock connected. After analyzing, there are few
parts needed to be adjusted:
1. hpd_rx_offload_wq[].aconnector is not initialzed before the dmub outbox
hpd_irq handler get registered which causes the error message.
2. registeration of hpd and hpd_rx_irq event for usb4 dp tunneling is not
aligned with legacy interface sequence
[How]
Put DMUB_NOTIFICATION_HPD and DMUB_NOTIFICATION_HPD_IRQ handler
registration into register_hpd_handlers() to align other interfaces and
get hpd_rx_offload_wq[].aconnector initialized earlier than that.
Leave DMUB_NOTIFICATION_AUX_REPLY registered as it was since we need that
while calling dc_link_detect(). USB4 connection status will be proactively
detected by dc_link_detect_connection_type() in amdgpu_dm_initialize_drm_device()
Cc: Stable <stable@vger.kernel.org>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add device-tree for LG Optimus 4X HD P880, which is a NVIDIA
Tegra30-based smartphone, originally running Android.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add device-tree for LG Optimus Vu P895, which is a NVIDIA
Tegra30-based smartphone, originally running Android.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
A recent rt5640 codec update requires mclk definition in the
device tree. Without mclk defined sound will not work.
Signed-off-by: Robert Eckelmann <longnoserob@gmail.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add a compatible for the LG Optimus Vu P895 and Optimus 4X P880.
Signed-off-by: Maxim Schwalm <maxim.schwalm@gmail.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
By default tests are forked, add an option (-p or --parallel) so that
the forked tests are all started in parallel and then their output
gathered serially. This is opt-in as running in parallel can cause
test flakes.
Rather than fork within the code, the start_command/finish_command
from libsubcmd are used. This changes how stderr and stdout are
handled. The child stderr and stdout are always read to avoid the
child blocking. If verbose is 1 (-v) then if the test fails the child
stdout and stderr are displayed. If the verbose is >1 (e.g. -vv) then
the stdout and stderr from the child are immediately displayed.
An unscientific test on my laptop shows the wall clock time for perf
test without parallel being 5 minutes 21 seconds and with parallel
(-p) being 1 minute 50 seconds.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: llvm@lists.linux.dev
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240221034155.1500118-9-irogers@google.com
Rather than special shell test logic, do a single pass to create an
array of test suites. Hold the shell test file name in the test suite
priv field. This makes the special shell test logic in builtin-test.c
redundant so remove it.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: llvm@lists.linux.dev
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240221034155.1500118-8-irogers@google.com
Avoid filename appending buffers by using openat, faccessat and
scandirat more widely. Turn the script's path back to a file name
using readlink from /proc/<pid>/fd/<fd>.
Read the script's description using api/io.h to avoid fdopen
conversions. Whilst reading perform additional sanity checks on the
script's contents.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: llvm@lists.linux.dev
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240221034155.1500118-7-irogers@google.com
builtin-test-list is primarily concerned with shell script
tests. Rename the file to better reflect this and add a missed header
guard.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: llvm@lists.linux.dev
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240221034155.1500118-6-irogers@google.com
Tools like perf fork tests in case they crash, but they don't want to
exec a full binary. Add an option to call a function rather than do an
exec. The child process exits with the result of the function call and
is passed the struct of the run_command, things like container_of can
then allow the child process function to determine additional
arguments.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: llvm@lists.linux.dev
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240221034155.1500118-5-irogers@google.com
perf test -vv Symbols is used to indentify symbols within the perf
binary. Add the -F flag so that the test command doesn't fork the test
before running. This removes a little overhead.
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: llvm@lists.linux.dev
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240221034155.1500118-4-irogers@google.com
Specifying which fields were unused allows IANA to only list as deprecated
instructions that were actually used, leaving the rest as unassigned and
possibly available for future use for something else.
Signed-off-by: Dave Thaler <dthaler1968@gmail.com>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20240221175419.16843-1-dthaler1968@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
scandirat is used during the printing of tracepoint events but may be
missing from certain libcs. Add a compatibility implementation that
uses the symlink of an fd in /proc as a path for the reliably present
scandir.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: llvm@lists.linux.dev
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240221034155.1500118-3-irogers@google.com
Scanning /proc is inherently racy. Scanning /proc/pid/task within that
is also racy as the pid can terminate. Rather than failing in
__thread_map__new_all_cpus, skip pids for such failures.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: llvm@lists.linux.dev
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240221034155.1500118-2-irogers@google.com
Since commit 8b631f9cf0 ("null_blk: remove the bio based I/O path"),
struct nullb members queue_depth and nr_queues are only ever written, so
delete them.
With that, null_exit_hctx() can also be deleted.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240222083420.6026-1-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The two users can get the private data from the gendisk with one less
pointer dereference, and we can drop the useless q parameter from
pkt_make_request_write.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240222073647.3776769-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
* "BPF ADD" should be "BPF_ADD".
* "src" should be "src_reg" in several places. The latter is the field name
in the instruction. The former refers to the value of the register, or the
immediate.
* Add '' around field names in one sentence, for consistency with the rest
of the document.
Signed-off-by: Dave Thaler <dthaler1968@gmail.com>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20240221173535.16601-1-dthaler1968@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch is to add vcn 4.0.6 support
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Convert open coded RMW accesses for LNKCTL2 to use
pcie_capability_clear_and_set_word() which makes its easier to
understand what the code tries to do.
LNKCTL2 is not really owned by any driver because it is a collection of
control bits that PCI core might need to touch. RMW accessors already
have support for proper locking for a selected set of registers
(LNKCTL2 is not yet among them but likely will be in the future) to
avoid losing concurrent updates.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Suggested-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use the new KMEM_CACHE() macro instead of direct kmem_cache_create
to simplify the creation of SLAB caches.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enabled the VCN Power Gating and Clock Gating flags for VCN 4.0.6.
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Veerabadhran Gopalakrishnan <veerabadhran.gopalakrishnan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The Amlogic-T7 SoCs support 12 GPIO IRQ lines compared with previous
serial chips and have something different, details are as below.
IRQ Number:
- 156 1 pin on bank TESTN
- 155:148 8 pins on bank H
- 147:129 19 pins on bank Y
- 128:115 14 pins on bank M
- 114:91 24 pins on bank T
- 90:77 14 pins on bank Z
- 76:70 7 pins on bank E
- 69:57 13 pins on bank D
- 56:40 17 pins on bank W
- 39:20 20 pins on bank X
- 19:13 7 pins on bank C
- 12:0 13 pins on bank B
Signed-off-by: Huqiang Qin <huqiang.qin@amlogic.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240222074640.1866284-3-huqiang.qin@amlogic.com
Correct the short description of the following events:
DCW_REQ, DCW_REQ_CHIP_HIT, DCW_REQ_DRAWER_HIT, DCW_REQ_IV,
DCW_ON_CHIP, DCW_ON_CHIP_IV, DCW_ON_CHIP_CHIP_HIT,
DCW_ON_CHIP_DRAWER_HIT, CW_ON_MODULE, DCW_ON_DRAWER,
DCW_OFF_DRAWER, IDCW_ON_MODULE_IV, IDCW_ON_MODULE_CHIP_HIT,
IDCW_ON_MODULE_DRAWER_HIT, IDCW_ON_DRAWER_IV, IDCW_ON_DRAWER_CHIP_HIT,
IDCW_ON_DRAWER_DRAWER_HIT, IDCW_OFF_DRAWER_IV, IDCW_OFF_DRAWER_CHIP_HIT,
IDCW_OFF_DRAWER_DRAWER_HIT, ICW_REQ, ICW_REQ_IV, CW_REQ_CHIP_HIT,
ICW_REQ_DRAWER_HIT, ICW_ON_CHIP, ICW_ON_CHIP_IV, ICW_ON_CHIP_CHIP_HIT,
ICW_ON_CHIP_DRAWER_HIT, ICW_ON_MODULE and ICW_OFF_DRAWER.
The second Cache should be L2-Cache.
Output before (display diff of the first four events)
# perf list -d
DCW_REQ
[Directory Write Level 1 Data Cache from Cache. Unit: cpum_cf]
DCW_REQ_CHIP_HIT
[Directory Write Level 1 Data Cache from Cache with Chip HP \
Hit. Unit: cpum_cf]
DCW_REQ_DRAWER_HIT
[Directory Write Level 1 Data Cache from Cache with Drawer \
HP Hit. Unit: cpum_cf]
DCW_REQ_IV
[Directory Write Level 1 Data Cache from Cache with Intervention. \
Unit: cpum_cf]
Output after:
# perf list -d
DCW_REQ
[Directory Write Level 1 Data Cache from L2-Cache. Unit: cpum_cf]
DCW_REQ_CHIP_HIT
[Directory Write Level 1 Data Cache from L2-Cache with Chip HP \
Hit. Unit: cpum_cf]
DCW_REQ_DRAWER_HIT
[Directory Write Level 1 Data Cache from L2-Cache with Drawer \
HP Hit. Unit: cpum_cf]
DCW_REQ_IV
[Directory Write Level 1 Data Cache from L2-Cache with \
Intervention. Unit: cpum_cf]
Fixes: 7f76b31130 ("perf list: Add IBM z16 event description for s390")
Reported-by: Andreas Krebbel <krebbel@linux.ibm.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Andreas Krebbel <krebbel@linux.ibm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: gor@linux.ibm.com
Cc: hca@linux.ibm.com
Cc: sumanthk@linux.ibm.com
Cc: svens@linux.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240221091908.1759083-1-tmricht@linux.ibm.com
The MGBE power-domains on Tegra234 are mapped to the MGBE controllers as
follows:
MGBE0 (0x68000000) --> Power-Domain MGBEB
MGBE1 (0x69000000) --> Power-Domain MGBEC
MGBE2 (0x6a000000) --> Power-Domain MGBED
Update the device-tree nodes for Tegra234 to correct this.
Fixes: 610cdf3186 ("arm64: tegra: Add MGBE nodes on Tegra234")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>