Commit graph

1,309,163 commits

Author SHA1 Message Date
Paolo Abeni
d440a4e27a mptcp: annotate lockless access for the tx path
The mptcp-level TX path info (write_seq, bytes_sent, snd_nxt) are under
the msk socket lock protection, and are accessed lockless in a few spots.

Always mark the write operations with WRITE_ONCE, read operations
outside the lock with READ_ONCE and drop the annotation for read
under such lock.

To simplify the annotations move mptcp_pending_data_fin_ack() from
__mptcp_data_acked() to __mptcp_clean_una(), under the msk socket
lock, where such call would belong.

Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-05 11:18:09 +00:00
Paolo Abeni
1c09d7cbb5 mptcp: annotate access for msk keys
Both the local and the remote key follow the same locking
schema, put in place the proper ONCE accessors.

Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-05 11:18:09 +00:00
Lucas Stach
059c53e877 drm/bridge: imx: add driver for HDMI TX Parallel Video Interface
This IP block is found in the HDMI subsystem of the i.MX8MP SoC. It has a
full timing generator and can switch between different video sources. On
the i.MX8MP however the only supported source is the LCDIF. The block
just needs to be powered up and told about the polarity of the video
sync signals to act in bypass mode.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Marek Vasut <marex@denx.de>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Richard Leitner <richard.leitner@skidata.com>
Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Adam Ford <aford173@gmail.com>
Link: https://lore.kernel.org/r/20240203165307.7806-9-aford173@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240203165307.7806-9-aford173@gmail.com
2024-02-05 12:16:44 +01:00
Lucas Stach
f490d0cb93 dt-bindings: display: imx: add binding for i.MX8MP HDMI PVI
Add binding for the i.MX8MP HDMI parallel video interface block.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Adam Ford <aford173@gmail.com>
Link: https://lore.kernel.org/r/20240203165307.7806-8-aford173@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240203165307.7806-8-aford173@gmail.com
2024-02-05 12:16:43 +01:00
Gerhard Engleder
1e08223272 tsnep: Add helper for RX XDP_RING_NEED_WAKEUP flag
Similar chunk of code is used in tsnep_rx_poll_zc() and
tsnep_rx_reopen_xsk() to maintain the RX XDP_RING_NEED_WAKEUP flag.
Consolidate the code to common helper function.

Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-05 11:15:19 +00:00
David S. Miller
fdeba0b57d Merge branch 'nfp-fixes'
Louis Peens says:

====================
nfp: a few simple driver fixes

This is combining a few unrelated one-liner fixes which have been
floating around internally into a single series. I'm not sure what is
the least amount of overhead for reviewers, this or a separate
submission per-patch? I guess it probably depends on personal
preference, but please let me know if there is a strong preference to
rather split these in the future.

Summary:

Patch1: Fixes an old issue which was hidden because 0 just so happens to
        be the correct value.
Patch2: Fixes a corner case for flower offloading with bond ports
Patch3: Re-enables the 'NETDEV_XDP_ACT_REDIRECT', which was accidentally
        disabled after a previous refactor.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-05 11:11:09 +00:00
James Hershaw
0f4d6f011b nfp: enable NETDEV_XDP_ACT_REDIRECT feature flag
Enable previously excluded xdp feature flag for NFD3 devices. This
feature flag is required in order to bind nfp interfaces to an xdp
socket and the nfp driver does in fact support the feature.

Fixes: 66c0e13ad2 ("drivers: net: turn on XDP features")
Cc: stable@vger.kernel.org # 6.3+
Signed-off-by: James Hershaw <james.hershaw@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-05 11:11:09 +00:00
Daniel de Villiers
1a1c13303f nfp: flower: prevent re-adding mac index for bonded port
When physical ports are reset (either through link failure or manually
toggled down and up again) that are slaved to a Linux bond with a tunnel
endpoint IP address on the bond device, not all tunnel packets arriving
on the bond port are decapped as expected.

The bond dev assigns the same MAC address to itself and each of its
slaves. When toggling a slave device, the same MAC address is therefore
offloaded to the NFP multiple times with different indexes.

The issue only occurs when re-adding the shared mac. The
nfp_tunnel_add_shared_mac() function has a conditional check early on
that checks if a mac entry already exists and if that mac entry is
global: (entry && nfp_tunnel_is_mac_idx_global(entry->index)). In the
case of a bonded device (For example br-ex), the mac index is obtained,
and no new index is assigned.

We therefore modify the conditional in nfp_tunnel_add_shared_mac() to
check if the port belongs to the LAG along with the existing checks to
prevent a new global mac index from being re-assigned to the slave port.

Fixes: 20cce88650 ("nfp: flower: enable MAC address sharing for offloadable devs")
CC: stable@vger.kernel.org # 5.1+
Signed-off-by: Daniel de Villiers <daniel.devilliers@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-05 11:11:09 +00:00
Daniel Basilio
b3d4f7f228 nfp: use correct macro for LengthSelect in BAR config
The 1st and 2nd expansion BAR configuration registers are configured,
when the driver starts up, in variables 'barcfg_msix_general' and
'barcfg_msix_xpb', respectively. The 'LengthSelect' field is ORed in
from bit 0, which is incorrect. The 'LengthSelect' field should
start from bit 27.

This has largely gone un-noticed because
NFP_PCIE_BAR_PCIE2CPP_LengthSelect_32BIT happens to be 0.

Fixes: 4cb584e0ee ("nfp: add CPP access core")
Cc: stable@vger.kernel.org # 4.11+
Signed-off-by: Daniel Basilio <daniel.basilio@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-05 11:11:09 +00:00
Eric Dumazet
89304f91bf sctp: preserve const qualifier in sctp_sk()
We can change sctp_sk() to propagate its argument const qualifier,
thanks to container_of_const().

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Cc: Xin Long <lucien.xin@gmail.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-05 11:08:06 +00:00
Han Xu
59950610c0 mtd: spinand: gigadevice: Fix the get ecc status issue
Some GigaDevice ecc_get_status functions use on-stack buffer for
spi_mem_op causes spi_mem_check_op failing, fix the issue by using
spinand scratchbuf.

Fixes: c40c7a990a ("mtd: spinand: Add support for GigaDevice GD5F1GQ4UExxG")
Signed-off-by: Han Xu <han.xu@nxp.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20231108150701.593912-1-han.xu@nxp.com
2024-02-05 11:50:31 +01:00
Ard Biesheuvel
1ad55cecf2 x86/efistub: Use 1:1 file:memory mapping for PE/COFF .compat section
The .compat section is a dummy PE section that contains the address of
the 32-bit entrypoint of the 64-bit kernel image if it is bootable from
32-bit firmware (i.e., CONFIG_EFI_MIXED=y)

This section is only 8 bytes in size and is only referenced from the
loader, and so it is placed at the end of the memory view of the image,
to avoid the need for padding it to 4k, which is required for sections
appearing in the middle of the image.

Unfortunately, this violates the PE/COFF spec, and even if most EFI
loaders will work correctly (including the Tianocore reference
implementation), PE loaders do exist that reject such images, on the
basis that both the file and memory views of the file contents should be
described by the section headers in a monotonically increasing manner
without leaving any gaps.

So reorganize the sections to avoid this issue. This results in a slight
padding overhead (< 4k) which can be avoided if desired by disabling
CONFIG_EFI_MIXED (which is only needed in rare cases these days)

Fixes: 3e3eabe26d ("x86/boot: Increase section and file alignment to 4k/512")
Reported-by: Mike Beaton <mjsbeaton@gmail.com>
Link: https://lkml.kernel.org/r/CAHzAAWQ6srV6LVNdmfbJhOwhBw5ZzxxZZ07aHt9oKkfYAdvuQQ%40mail.gmail.com
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2024-02-05 10:24:51 +00:00
Jessica Zhang
bb3bc3eac3 drm/panel: visionox-r66451: Set prepare_prev_first flag
The DSI host needs to be enabled for the panel to be initialized in
prepare(). Ensure this happens by setting prepare_prev_first.

Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240202-visionox-r66451-prev-first-v1-1-c267dc889284@quicinc.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240202-visionox-r66451-prev-first-v1-1-c267dc889284@quicinc.com
2024-02-05 11:03:35 +01:00
Randy Dunlap
311d0fad2a drm/rect: fix kernel-doc typos
Correct typos of "translated".

Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patchwork.freedesktop.org/patch/msgid/20240205054101.27929-1-rdunlap@infradead.org
2024-02-05 11:02:07 +01:00
Josua Mayer
2a33952350 ARM: dts: imx6qdl-hummingboard: Add rtc0 and rtc1 aliases to fix hctosys
HummingBoard has two RTCs, first integrated within SoC that can be used to
wake up from sleep - and a second on the carrier board including back-up
battery which is intended for keeping time during power-off.

Add aliases for both, ensuring that the battery-backed clock is primary
rtc and used by default during boot for restoring system time.

Fixes keeping time across power-cycle observed on Debian,
which sets RTC_HCTOSYS_DEVICE="rtc0".

Signed-off-by: Josua Mayer <josua@solid-run.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-02-05 17:56:01 +08:00
Krzysztof Kozlowski
2aea2edd88 arm64: dts: imx93: drop "master" I3C node name suffix
Following change in the I3C bindings, the "master" suffix in I3C
controller node name is discouraged (it is "controller" now) and not
accurate (if device supports also target mode).

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-02-05 17:49:54 +08:00
Frieder Schrempf
8458002b76 ARM: dts: imx6dl: Add support for Sielaff i.MX6 Solo board
The Sielaff i.MX6 Solo board is used as controller and user interface
in vending machines. It is based on the i.MX6 Solo SoC and features
the following peripherals and interfaces:

* 512 MB DDR3 RAM
* 512 MB NAND Flash
* 1 MB NOR Flash
* SD card
* Debug LED
* Debug UART
* Key Inputs
* RTC
* RS232
* 100 MBit Ethernet
* USB Hub
* USB OTG
* HDMI
* 7" LVDS IPS panel
* PWM Backlight
* Optional Extension Board with USB Ethernet NIC

Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-02-05 17:37:23 +08:00
Frieder Schrempf
6e489bd5aa dt-bindings: arm: fsl: Add Sielaff i.MX6 Solo board
Add compatible for the Sielaff i.MX6 Solo board.

Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-02-05 17:36:49 +08:00
Fabio Estevam
690085d866 Revert "arm64: dts: imx8mn-var-som-symphony: Describe the USB-C connector"
This reverts commit 095b96b2b8.

Marek reported the similar change in imx8mp-dhcom-pdk3.dts
caused a regression:

"This patch breaks USB-C port on this board.

If I plug in USB-C storage device, it is not detected. If I revert this
patch, it is detected.

Please drop this patch for now."

Revert it here as well.

Fixes: 095b96b2b8 ("arm64: dts: imx8mn-var-som-symphony: Describe the USB-C connector")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-02-05 17:27:45 +08:00
Fabio Estevam
f954785a12 Revert "arm64: dts: imx8mp-dhcom-pdk3: Describe the USB-C connector"
This reverts commit a4dca89fe8.

Marek reported:

"This patch breaks USB-C port on this board.

If I plug in USB-C storage device, it is not detected. If I revert this
patch, it is detected.

Please drop this patch for now."

Revert it to avoid the regression.

Reported-by: Marek Vasut <marex@denx.de>
Closes: https://lore.kernel.org/linux-arm-kernel/623c294a-5c53-4e01-acbf-104acc180e14@denx.de/T/#u
Fixes: a4dca89fe8 ("arm64: dts: imx8mp-dhcom-pdk3: Describe the USB-C connector")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-02-05 17:27:35 +08:00
Ricardo B. Marliere
a6a789165b x86/mce: Make mce_subsys const
Now that the driver core can properly handle constant struct bus_type,
make mce_subsys a constant structure.

Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240204-bus_cleanup-x86-v1-1-4e7171be88e8@marliere.net
2024-02-05 10:26:51 +01:00
Christophe JAILLET
0d04e84db7 ARM: imx: Remove usage of the deprecated ida_simple_xx() API
ida_alloc() and ida_free() should be preferred to the deprecated
ida_simple_get() and ida_simple_remove().

This is less verbose.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-02-05 17:23:28 +08:00
Alexander Stein
b7528796f9 arm64: dts: freescale: tqma9352: Update I2C eeprom compatible
Now that there is a dedicated compatible for the idendification page use
that instead. This also allows the removal the size and pagesize
properties.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-02-05 17:19:02 +08:00
Alexander Stein
f78835d1e6 arm64: dts: imx8mp: reparent MEDIA_MIPI_PHY1_REF to CLK_24M
This is already done in dsi node, introduced in commit eda09fe149
("arm64: dts: imx8mp: Add display pipeline components").
This needs to be applied to csi nodes as well or the clock might be busy
if both csi and dsi nodes are enabled.
Fixes error:
 clk: failed to reparent media_mipi_phy1_ref to osc_24m: -16

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-02-05 17:18:03 +08:00
Alexander Stein
a620a7f2ae arm64: dts: tqma8mpql: fix audio codec iov-supply
IOVDD is supplied by 1.8V, fix the referenced regulator.

Fixes: d8f9d81265 ("arm64: dts: imx8mp: Add analog audio output on i.MX8MP TQMa8MPxL/MBa8MPxL")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-02-05 17:16:01 +08:00
Igor Prusov
ba535bce57 clk: meson: Add missing clocks to axg_clk_regmaps
Some clocks were missing from axg_clk_regmaps, which caused kernel panic
during cat /sys/kernel/debug/clk/clk_summary

[   57.349402] Unable to handle kernel NULL pointer dereference at virtual address 00000000000001fc
...
[   57.430002] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[   57.436900] pc : regmap_read+0x1c/0x88
[   57.440608] lr : clk_regmap_gate_is_enabled+0x3c/0xb0
[   57.445611] sp : ffff800082f1b690
[   57.448888] x29: ffff800082f1b690 x28: 0000000000000000 x27: ffff800080eb9a70
[   57.455961] x26: 0000000000000007 x25: 0000000000000016 x24: 0000000000000000
[   57.463033] x23: ffff800080e8b488 x22: 0000000000000015 x21: ffff00000e7e7000
[   57.470106] x20: ffff00000400ec00 x19: 0000000000000000 x18: ffffffffffffffff
[   57.477178] x17: 0000000000000000 x16: 0000000000000000 x15: ffff0000042a3000
[   57.484251] x14: 0000000000000000 x13: ffff0000042a2fec x12: 0000000005f5e100
[   57.491323] x11: abcc77118461cefd x10: 0000000000000020 x9 : ffff8000805e4b24
[   57.498396] x8 : ffff0000028063c0 x7 : ffff800082f1b710 x6 : ffff800082f1b710
[   57.505468] x5 : 00000000ffffffd0 x4 : ffff800082f1b6e0 x3 : 0000000000001000
[   57.512541] x2 : ffff800082f1b6e4 x1 : 000000000000012c x0 : 0000000000000000
[   57.519615] Call trace:
[   57.522030]  regmap_read+0x1c/0x88
[   57.525393]  clk_regmap_gate_is_enabled+0x3c/0xb0
[   57.530050]  clk_core_is_enabled+0x44/0x120
[   57.534190]  clk_summary_show_subtree+0x154/0x2f0
[   57.538847]  clk_summary_show_subtree+0x220/0x2f0
[   57.543505]  clk_summary_show_subtree+0x220/0x2f0
[   57.548162]  clk_summary_show_subtree+0x220/0x2f0
[   57.552820]  clk_summary_show_subtree+0x220/0x2f0
[   57.557477]  clk_summary_show_subtree+0x220/0x2f0
[   57.562135]  clk_summary_show_subtree+0x220/0x2f0
[   57.566792]  clk_summary_show_subtree+0x220/0x2f0
[   57.571450]  clk_summary_show+0x84/0xb8
[   57.575245]  seq_read_iter+0x1bc/0x4b8
[   57.578954]  seq_read+0x8c/0xd0
[   57.582059]  full_proxy_read+0x68/0xc8
[   57.585767]  vfs_read+0xb0/0x268
[   57.588959]  ksys_read+0x70/0x108
[   57.592236]  __arm64_sys_read+0x24/0x38
[   57.596031]  invoke_syscall+0x50/0x128
[   57.599740]  el0_svc_common.constprop.0+0x48/0xf8
[   57.604397]  do_el0_svc+0x28/0x40
[   57.607675]  el0_svc+0x34/0xb8
[   57.610694]  el0t_64_sync_handler+0x13c/0x158
[   57.615006]  el0t_64_sync+0x190/0x198
[   57.618635] Code: a9bd7bfd 910003fd a90153f3 aa0003f3 (b941fc00)
[   57.624668] ---[ end trace 0000000000000000 ]---

[jbrunet: add missing Fixes tag]
Signed-off-by: Igor Prusov <ivprusov@salutedevices.com>
Link: https://lore.kernel.org/r/20240202172537.1.I64656c75d84284bc91e6126b50b33c502be7c42a@changeid
Fixes: 14ebb3154b ("clk: meson: axg: add Video Clocks")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2024-02-05 10:06:21 +01:00
Ricardo B. Marliere
a875746f60 gpio: gpiolib: make gpio_bus_type const
Now that the driver core can properly handle constant struct bus_type,
move the gpio_bus_type variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2024-02-05 09:42:21 +01:00
Michal Simek
fc449cefe6 dt-bindings: gpio: pca9570: Add label property
Add a label property to allow a custom name to be used for identifying
a device on the board. This is useful when multiple devices are present on
the same board. Similar change was done by commit ffae65fb1a
("dt-bindings: spi: spi-cadence: Add label property") or by commit
a53faa6bfa3b ("dt-bindings: hwmon: ina2xx: Add label property").

Signed-off-by: Michal Simek <michal.simek@amd.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2024-02-05 09:29:20 +01:00
Rob Herring
868206f1eb dt-bindings: gpio: mvebu: Fix "unevaluatedProperties" to be false
Schemas need "unevaluatedProperties" or "additionalProperties" to be
false in order to disallow undefined properties. Only common or
otherwise incomplete schemas should allow undefined properties.

Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2024-02-05 09:27:49 +01:00
Bart Van Assche
fdfa083549 RDMA/srpt: Support specifying the srpt_service_guid parameter
Make loading ib_srpt with this parameter set work. The current behavior is
that setting that parameter while loading the ib_srpt kernel module
triggers the following kernel crash:

BUG: kernel NULL pointer dereference, address: 0000000000000000
Call Trace:
 <TASK>
 parse_one+0x18c/0x1d0
 parse_args+0xe1/0x230
 load_module+0x8de/0xa60
 init_module_from_file+0x8b/0xd0
 idempotent_init_module+0x181/0x240
 __x64_sys_finit_module+0x5a/0xb0
 do_syscall_64+0x5f/0xe0
 entry_SYSCALL_64_after_hwframe+0x6e/0x76

Cc: LiHonggang <honggangli@163.com>
Reported-by: LiHonggang <honggangli@163.com>
Fixes: a42d985bd5 ("ib_srpt: Initial SRP Target merge for v3.3-rc1")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240205004207.17031-1-bvanassche@acm.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
2024-02-05 09:57:53 +02:00
Shuming Fan
fddab35fd0 ALSA: hda/realtek: add IDs for Dell dual spk platform
This patch adds another two IDs for the Dell dual speaker platform.

Signed-off-by: Shuming Fan <shumingf@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240205072252.3791500-1-shumingf@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-02-05 08:25:40 +01:00
Alexander Stein
e2eae2e329 ARM: dts: imx6ul: Add missing #thermal-sensor-cells to tempmon
Fixes the dtbs_check warning:
  tempmon: '#thermal-sensor-cells' is a required property

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-02-05 15:25:32 +08:00
bo liu
4639c50210 ALSA: hda/conexant: Add quirk for SWS JS201D
The SWS JS201D need a different pinconfig from windows driver.
Add a quirk to use a specific pinconfig to SWS JS201D.

Signed-off-by: bo liu <bo.liu@senarytech.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240205013802.51907-1-bo.liu@senarytech.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-02-05 08:24:50 +01:00
Philippe Schenker
c8d29601fe arm64: dts: imx8mp-verdin: Label ldo5 and link to usdhc2
This commit labels LDO5 as `reg_vdd_sdio` in `imx8mp-verdin.dtsi` to
facilitate changing its voltage to 1.8V, necessary for an SDIO
peripheral that requires 1.8V at default and high-speed modes.

Additionally, it links `reg_vdd_sdio` to `&usdhc2`, aligning with the
hardware configuration specified in the datasheet.

Signed-off-by: Philippe Schenker <philippe.schenker@impulsing.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-02-05 15:24:29 +08:00
Mathieu Othacehe
4ce623d9f1 arm64: dts: imx93-var-som: Add Variscite VAR-SOM-MX93
Add DTSI for Variscite VAR-SOM-MX93 System on Module and DTS for Variscite
VAR-SOM-MX93 on Symphony evaluation board.

This version comes with:
- NXP i.MX 93 Dual, 1.7GHz, Cortex-A55 + Cortex-M33
- 2 GB of RAM
- 16GB eMMC
- 802.11ax/ac/a/b/g/n WiFi with 5.3 Bluetooth
- CAN bus
- Audio codec

Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-02-05 15:18:35 +08:00
Mathieu Othacehe
2ca8377bf2 dt-bindings: arm: fsl: Add VAR-SOM-MX93 with Symphony
Add support for Variscite i.MX93 VAR-SOM-MX93 SoM with Symphony board.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-02-05 15:17:39 +08:00
Fabio Estevam
2cc2363cc7 arm64: dts: ls1046a: Remove big-endian from thermal
Per qoriq-thermal.yaml, 'big-endian' is not a valid property.

When the 'little-endian' property is absent, the default is big endian.

Remove it to fix the following schema warning:

tmu@1f00000: 'big-endian' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/thermal/qoriq-thermal.yaml#

Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-02-05 15:02:09 +08:00
Andreas Kemnade
a2921599ec ARM: dts: imx6sl-tolino-shine2hd: fix touchscreen rotation
The display is in landscape orientation, but the touchscreen is in portrait
orientation. Specify that properly in the devicetree.

Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-02-05 14:30:10 +08:00
Kent Overstreet
7b508b323b bcachefs: time_stats: Check for last_event == 0 when updating freq stats
This fixes spurious outliers in the frequency stats.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-02-05 01:16:31 -05:00
Mathias Krause
dd839f31d7 bcachefs: install fd later to avoid race with close
Calling fd_install() makes a file reachable for userland, including the
possibility to close the file descriptor, which leads to calling its
'release' hook. If that happens before the code had a chance to bump the
reference of the newly created task struct, the release callback will
call put_task_struct() too early, leading to the premature destruction
of the kernel thread.

Avoid that race by calling fd_install() later, after all the setup is
done.

Fixes: 1c6fdbd8f2 ("bcachefs: Initial commit")
Signed-off-by: Mathias Krause <minipli@grsecurity.net>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-02-05 01:16:15 -05:00
Nathan Lynch
8ded03ae48 powerpc/pseries/papr-sysparm: use u8 arrays for payloads
Some PAPR system parameter values are formatted by firmware as
nul-terminated strings (e.g. LPAR name, shared processor attributes).
But the values returned for other parameters, such as processor module
info and TLB block invalidate characteristics, are binary data with
parameter-specific layouts. So char[] isn't the appropriate type for
the general case. Use u8/__u8.

Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Fixes: 905b9e4878 ("powerpc/pseries/papr-sysparm: Expose character device to user space")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240202-papr-sysparm-ioblock-data-use-u8-v1-1-f5c6c89f65ec@linux.ibm.com
2024-02-05 17:01:25 +11:00
Christoph Niedermaier
38c0483d08 ARM: dts: imx6ull-dhcor: Remove 900MHz operating point
Due to CPU lifetime consideration of the SoC manufacturer [1] and
the preferred area of operation in the industrial related
environment, set the maximum frequency for each DHCOM i.MX6ULL to
792MHz, as with the industrial type. This is done by removing the
operating point at 900MHz and set the clock-frequency to 792000000.

[1] https://www.nxp.com/docs/en/application-note/AN5337.pdf

Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-02-05 13:48:56 +08:00
Dave Airlie
f8e4806e0d drm-misc-next for v6.9:
UAPI Changes:
 
 virtio:
 - add Venus capset defines
 
 Cross-subsystem Changes:
 
 Core Changes:
 
 - fix drm_fixp2int_ceil()
 - documentation fixes
 - clean ups
 - allow DRM_MM_DEBUG with DRM=m
 - build fixes for debugfs support
 - EDID cleanups
 - sched: error-handling fixes
 - ttm: add tests
 
 Driver Changes:
 
 bridge:
 - ite-6505: fix DP link-training bug
 - samsung-dsim: fix error checking in probe
 - tc358767: fix regmap usage
 
 efifb:
 - use copy of global screen_info state
 
 hisilicon:
 - fix EDID includes
 
 mgag200:
 - improve ioremap usage
 - convert to struct drm_edid
 
 nouveau:
 - disp: use kmemdup()
 - fix EDID includes
 - documentation fixes
 
 panel:
 - ltk050h3146w: error-handling fixes
 - panel-edp: support delay between power-on and enable; use put_sync in
   unprepare; support Mediatek MT8173 Chromebooks, BOE NV116WHM-N49 V8.0,
   BOE NV122WUM-N41, CSO MNC207QS1-1 plus DT bindings
 - panel-lvds: support EDT ETML0700Z9NDHA plus DT bindings
 - panel-novatek: FRIDA FRD400B25025-A-CTK plus DT bindings
 
 qaic:
 - fixes to BO handling
 - make use of DRM managed release
 - fix order of remove operations
 
 rockchip:
 - analogix_dp: get encoder port from DT
 - inno_hdmi: support HDMI for RK3128
 - lvds: error-handling fixes
 
 simplefb:
 - fix logging
 
 ssd130x:
 - support SSD133x plus DT bindings
 
 tegra:
 - fix error handling
 
 tilcdc:
 - make use of DRM managed release
 
 v3d:
 - show memory stats in debugfs
 
 vc4:
 - fix error handling in plane prepare_fb
 - fix framebuffer test in plane helpers
 
 vesafb:
 - use copy of global screen_info state
 
 virtio:
 - cleanups
 
 vkms:
 - fix OOB access when programming the LUT
 - Kconfig improvements
 
 vmwgfx:
 - unmap surface before changing plane state
 - fix memory leak in error handling
 - documentation fixes
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEchf7rIzpz2NEoWjlaA3BHVMLeiMFAmWgDSsACgkQaA3BHVML
 eiPG5AgAjK42pY25OezV/wmUiffhfDluTbjw+Cjwg/IzZ+RyAMcf1q7R8Oid6G6o
 kG64WfUmBURwdOQ2nvtJGum8YoBx70uvmKyFzhu20v+e9HT/EFizRi7Qvg71Il/0
 l8WQ5BJ1W6PvJKgEU4io+OWWhDyZ1B3GpCvkd30wF2Vfi0CPeeVAvwmeKC5Rj4lE
 lbYa93sAS/neNkTBvhEEUGoz/t9+5FqAMarygM6hYzDVgnhs8Mbm/pRKCUgPvYvp
 871oibBPenQGP6jkWU1h1UWIa5CACvHgkebSGUGy6b5e9jPBRrSmlnRhiviJEY1/
 6x7kGnB69r6I40CdY/1cnTqyhJ25cA==
 =GX2h
 -----END PGP SIGNATURE-----

Merge tag 'drm-misc-next-2024-01-11' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for v6.9:

UAPI Changes:

virtio:
- add Venus capset defines

Cross-subsystem Changes:

Core Changes:

- fix drm_fixp2int_ceil()
- documentation fixes
- clean ups
- allow DRM_MM_DEBUG with DRM=m
- build fixes for debugfs support
- EDID cleanups
- sched: error-handling fixes
- ttm: add tests

Driver Changes:

bridge:
- ite-6505: fix DP link-training bug
- samsung-dsim: fix error checking in probe
- tc358767: fix regmap usage

efifb:
- use copy of global screen_info state

hisilicon:
- fix EDID includes

mgag200:
- improve ioremap usage
- convert to struct drm_edid

nouveau:
- disp: use kmemdup()
- fix EDID includes
- documentation fixes

panel:
- ltk050h3146w: error-handling fixes
- panel-edp: support delay between power-on and enable; use put_sync in
  unprepare; support Mediatek MT8173 Chromebooks, BOE NV116WHM-N49 V8.0,
  BOE NV122WUM-N41, CSO MNC207QS1-1 plus DT bindings
- panel-lvds: support EDT ETML0700Z9NDHA plus DT bindings
- panel-novatek: FRIDA FRD400B25025-A-CTK plus DT bindings

qaic:
- fixes to BO handling
- make use of DRM managed release
- fix order of remove operations

rockchip:
- analogix_dp: get encoder port from DT
- inno_hdmi: support HDMI for RK3128
- lvds: error-handling fixes

simplefb:
- fix logging

ssd130x:
- support SSD133x plus DT bindings

tegra:
- fix error handling

tilcdc:
- make use of DRM managed release

v3d:
- show memory stats in debugfs

vc4:
- fix error handling in plane prepare_fb
- fix framebuffer test in plane helpers

vesafb:
- use copy of global screen_info state

virtio:
- cleanups

vkms:
- fix OOB access when programming the LUT
- Kconfig improvements

vmwgfx:
- unmap surface before changing plane state
- fix memory leak in error handling
- documentation fixes

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240111154902.GA8448@linux-uq9g
2024-02-05 13:50:15 +10:00
Zhi Wang
44e4192f88 MAINTAINERS: Update Zhi Wang's email address
Update my email address to zhi.wang.linux@gmail.com.

CC: Zhenyu Wang <zhenyuw@linux.intel.com>
Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhi Wang <zhi.wang.linux@gmail.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20240130212743.7727-1-zhi.wang.linux@gmail.com
2024-02-05 11:16:26 +08:00
Dan Carpenter
47caa96478 drm/i915/gvt: Fix uninitialized variable in handle_mmio()
This code prints the wrong variable in the warning message.  It should
print "i" instead of "info->offset".  On the first iteration "info" is
uninitialized leading to a crash and on subsequent iterations it prints
the previous offset instead of the current one.

Fixes: e0f74ed463 ("i915/gvt: Separate the MMIO tracking table from GVT-g")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/11957c20-b178-4027-9b0a-e32e9591dd7c@moroto.mountain
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2024-02-05 11:16:26 +08:00
Zhenyu Wang
1a00897e5e drm/i915: Replace dead 01.org link
01.org is dead so replace old gvt link with current wiki page.

Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Zhi Wang <zhi.wang.linux@gmail.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20230804040544.1972958-1-zhenyuw@linux.intel.com
2024-02-05 11:15:26 +08:00
Dragan Cvetic
d4d8fbcef0 dt-bindings: misc: xlnx,sd-fec: convert bindings to yaml
Convert AMD (Xilinx) sd-fec bindings to yaml format, so it can validate
dt-entries as well as any future additions to yaml.
Change in clocks is due to IP is itself configurable and
only the first two clocks are in all combinations. The last
6 clocks can be present in some of them. It means order is
not really fixed and any combination is possible.
Interrupt may or may not be present.
The documentation for sd-fec bindings is now YAML, so update the
MAINTAINERS file.
Update the link to the new yaml file in xilinx_sdfec.rst.

Signed-off-by: Dragan Cvetic <dragan.cvetic@amd.com>
Link: https://lore.kernel.org/r/20240131170650.530079-1-dragan.cvetic@amd.com
Signed-off-by: Rob Herring <robh@kernel.org>
2024-02-04 19:49:51 -06:00
Andrew Morton
c8bdef1560 Merge branch 'master' into mm-hotfixes-stable 2024-02-04 14:09:33 -08:00
Mike Tipton
5464e7acea interconnect: qcom: x1e80100: Add missing ACV enable_mask
The ACV BCM is voted using bitmasks. Add the proper mask for this
target.

Fixes: 9f19677284 ("interconnect: qcom: Add X1E80100 interconnect provider driver")
Signed-off-by: Mike Tipton <quic_mdtipton@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240202014806.7876-3-quic_mdtipton@quicinc.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
2024-02-04 23:36:06 +02:00
Mike Tipton
a40f93e928 interconnect: qcom: sm8650: Use correct ACV enable_mask
The ACV enable_mask is historically BIT(3), but it's BIT(0) on this
target. Fix it.

Fixes: c062bcab59 ("interconnect: qcom: introduce RPMh Network-On-Chip Interconnect on SM8650 SoC")
Signed-off-by: Mike Tipton <quic_mdtipton@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240202014806.7876-2-quic_mdtipton@quicinc.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
2024-02-04 23:35:50 +02:00