Commit graph

1,309,163 commits

Author SHA1 Message Date
Alexander Stein
cf22d87969 ARM: dts: imx7-tqma7: Add missing vcc supply to i2c eeproms
Fixes the warnings:
at24 0-0050: supply vcc not found, using dummy regulator
at24 0-0056: supply vcc not found, using dummy regulator

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-02-03 12:41:03 +08:00
Alexander Stein
b669a87ed3 ARM: dts: imx7d-mba7: Remove USB OTG related properties on USB node
These properties are only used on USB OTG/DR devices, remove them from
a host only device.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-02-03 12:41:01 +08:00
Alexander Stein
5ec4722f49 ARM: dts: imx7-tqma7: rename node for SE97BTP
temperature-sensor is the recommended node name and its main purpose.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-02-03 12:40:59 +08:00
Alexander Stein
c3daa6513e ARM: dts: imx7-tqma7: mark system data eeprom as read-only
This is manufacturer data and shall not be modified.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-02-03 12:40:57 +08:00
Alexander Stein
10a5682904 ARM: dts: imx7-tqma7: remove superfluous status property
SDMA is enabled by default, so remove the status property.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-02-03 12:40:55 +08:00
Alexander Stein
e498d366c2 ARM: dts: imx7-tqma7: restrict usdhc interface modes
USDHC3 is directly connected to an eMMC, so disable other interface modes.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-02-03 12:40:53 +08:00
Alexander Stein
d430a7e0e1 ARM: dts: imx7-mba7: restrict usdhc interface modes
USDHC1 is directly connected to an SD card, so disable other interface modes.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-02-03 12:40:51 +08:00
Alexander Stein
e7073f96f1 ARM: dts: imx7-tqma7: Fix iomuxc node names
The node name must end with 'grp'

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-02-03 12:40:49 +08:00
Alexander Stein
cfda4a44e6 ARM: dts: imx7-mba7: Fix iomuxc node names
The node name must end with 'grp'

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-02-03 12:40:47 +08:00
Alexander Stein
c4d9a26b08 ARM: dts: imx7-tqma7: fix EEPROM compatible for SE97BTP
0x56 is the EEPROM component of SE97BTP.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-02-03 12:40:46 +08:00
Alexander Stein
8dc2bd4822 ARM: dts: imx7-mba7: Add i2c bus recovery
Add the pin muxing and GPIO settings for SCL/SDA for i2c2 & i2c3.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-02-03 12:40:44 +08:00
Alexander Stein
908bfeb6a7 ARM: dts: imx7-tqma7: Add i2c bus recovery
Add the pin muxing and GPIO settings for SCL/SDA for i2c1.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-02-03 12:40:42 +08:00
Alexander Stein
1c8b4df70c ARM: dts: imx7-mba7: Add SPI1_SS0 as chip select 3
ECSPI1.SS0 was missing in the list.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-02-03 12:40:40 +08:00
Alexander Stein
123098a15d ARM: dts: imx7-mba7: Add RTC aliases
Ensure the RTC devices are numbered correctly.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-02-03 12:40:38 +08:00
Alexander Stein
f8d998b00e ARM: dts: imx7-mba7: Enable SNVS power key
This allows using S10 for power down / shutdown.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-02-03 12:40:36 +08:00
Alexander Stein
d78dd8472e ARM: dts: imx7-mba7: Mark gpio-buttons as wakeup-source
I2C expander is capable of generating an IRQ during powersave, so the
attached buttons can be used for waking up the system.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-02-03 12:40:33 +08:00
Alexander Stein
90ca55dc13 ARM: dts: imx7[d]-mba7: hog Mini PCIe signals
PCIE_DIS & PCIE_RST (correctly named W_DISABLE# & PERST#) affect USB
devices as well. So hog them to make USB devices attached to Mini PCIe
connector available, despite PCIe being disabled.
Supply voltages are enabled unconditionally.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-02-03 12:40:31 +08:00
Alexander Stein
ad3af29578 ARM: dts: imx7[d]-mba7: disable PCIe interface
Using internal PHY refclk is not supported yet.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-02-03 12:40:29 +08:00
Alexander Stein
7d37d9df42 ARM: dts: imx7[d]-mba7: disable USB OC on USB host and USB OTG2
USB host is an HSIC interface directly connected to a USB hub. USB OTG2
is a direct connection to Mini PCIe interface without any OC signaling.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-02-03 12:40:27 +08:00
Alexander Stein
d32fb60fc4 ARM: dts: imx7[d]-mba7: Move ethernet PHY reset into PHY node
Split pinctrl as well. 'reset-deassert-us' is added with a small safe
margin.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-02-03 12:40:25 +08:00
Alexander Stein
e67e40cff8 ARM: dts: imx7-tqma7/mba7: convert fsl,pins to uint32-matrix
make dtbs_check does not warn about this anymore, but bindings mandate
a uint32-matrix.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-02-03 12:40:21 +08:00
Alexei Starovoitov
2a79690eae Merge branch 'two-small-fixes-for-global-subprog-tagging'
Andrii Nakryiko says:

====================
Two small fixes for global subprog tagging

Fix a bug with passing trusted PTR_TO_BTF_ID_OR_NULL register into global
subprog that expects `__arg_trusted __arg_nullable` arguments, which was
discovered when adopting production BPF application.

Also fix annoying warnings that are irrelevant for static subprogs, which are
just an artifact of using btf_prepare_func_args() for both static and global
subprogs.
====================

Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240202190529.2374377-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-02-02 18:09:06 -08:00
Andrii Nakryiko
1eb986746a bpf: don't emit warnings intended for global subprogs for static subprogs
When btf_prepare_func_args() was generalized to handle both static and
global subprogs, a few warnings/errors that are meant only for global
subprog cases started to be emitted for static subprogs, where they are
sort of expected and irrelavant.

Stop polutting verifier logs with irrelevant scary-looking messages.

Fixes: e26080d0da ("bpf: prepare btf_prepare_func_args() for handling static subprogs")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240202190529.2374377-4-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-02-02 18:08:59 -08:00
Andrii Nakryiko
e2e70535dd selftests/bpf: add more cases for __arg_trusted __arg_nullable args
Add extra layer of global functions to ensure that passing around
(trusted) PTR_TO_BTF_ID_OR_NULL registers works as expected. We also
extend trusted_task_arg_nullable subtest to check three possible valid
argumements: known NULL, known non-NULL, and maybe NULL cases.

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240202190529.2374377-3-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-02-02 18:08:58 -08:00
Andrii Nakryiko
8f13c34087 bpf: handle trusted PTR_TO_BTF_ID_OR_NULL in argument check logic
Add PTR_TRUSTED | PTR_MAYBE_NULL modifiers for PTR_TO_BTF_ID to
check_reg_type() to support passing trusted nullable PTR_TO_BTF_ID
registers into global functions accepting `__arg_trusted __arg_nullable`
arguments. This hasn't been caught earlier because tests were either
passing known non-NULL PTR_TO_BTF_ID registers or known NULL (SCALAR)
registers.

When utilizing this functionality in complicated real-world BPF
application that passes around PTR_TO_BTF_ID_OR_NULL, it became apparent
that verifier rejects valid case because check_reg_type() doesn't handle
this case explicitly. Existing check_reg_type() logic is already
anticipating this combination, so we just need to explicitly list this
combo in the switch statement.

Fixes: e2b3c4ff5d ("bpf: add __arg_trusted global func arg tag")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240202190529.2374377-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-02-02 18:08:58 -08:00
Ben Gainey
acfd65c894 tools: perf: Expose sample ID / stream ID to python scripts
perf script exposes the evsel_name to python scripts as part of the data
passed to the sample or tracepoint handler function, and it passes the id and
stream_id to the throttled/unthrottled handler functions. This makes matching
throttle events and samples difficult.

To make this possible, this change exposes the sample id and stream_id values
to the script.

Signed-off-by: Ben Gainey <ben.gainey@arm.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: will@kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240123103137.1890779-2-ben.gainey@arm.com
2024-02-02 18:05:40 -08:00
Arnaldo Carvalho de Melo
ffd856537b perf bpf: Clean up the generated/copied vmlinux.h
When building perf with BPF skels we either copy the minimalistic
tools/perf/util/bpf_skel/vmlinux/vmlinux.h or use bpftool to generate a
vmlinux from BTF, storing the result in $(SKEL_OUT)/vmlinux.h.

We need to remove that when doing a 'make -C tools/perf clean', fix it.

Fixes: b7a2d774c9 ("perf build: Add ability to build with a generated vmlinux.h")
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: bpf@vger.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/Zbz89KK5wHfZ82jv@x1
2024-02-02 18:03:57 -08:00
Matthew Brost
72f86ed3c8 drm/xe: Map both mem.kernel_bb_pool and usm.bb_pool
For integrated devices we need to map both mem.kernel_bb_pool and
usm.bb_pool to be able to run batches from both pools.

Fixes: a682b6a42d ("drm/xe: Support device page faults on integrated platforms")
Tested-by: Brian Welty <brian.welty@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Brian Welty <brian.welty@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240202033440.2351862-1-matthew.brost@intel.com
2024-02-02 17:37:58 -08:00
Umang Chheda
d967cc9cf3 arm64: dts: qcom: qcm6490-idp: Include PM7250B
Include PM7250B PMIC for qcm6490-idp.

Signed-off-by: Umang Chheda <quic_uchheda@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240125115300.3496783-1-quic_uchheda@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-02-02 18:36:53 -06:00
Neil Armstrong
a33a532b3b arm64: dts: qcom: sm8650: Use GIC-ITS for PCIe0 and PCIe1
Both PCIe0 and PCIe1 controllers are capable of signalling the MSIs
received from endpoint devices to the CPU using GIC-ITS MSI controller.
Add support for it.

The GIC-ITS MSI implementation provides an advantage over internal MSI
implementation using Locality-specific Peripheral Interrupts (LPI) that
would allow MSIs to be targeted for each CPU core.

Like SM8450 & SM8550, the IDs are swapped, but works fine on PCIe0 and PCIe1.

WiFi PCIe Device on SM8650-QRD using GIC-ITS:
159:          0          0          0          0          0          0          0          0   ITS-MSI   0 Edge      PCIe PME, aerdrv
167:          0          4          0          0          0          0          0          0   ITS-MSI 524288 Edge      bhi
168:          0          0          4          0          0          0          0          0   ITS-MSI 524289 Edge      mhi
169:          0          0          0         34          0          0          0          0   ITS-MSI 524290 Edge      mhi
170:          0          0          0          0          3          0          0          0   ITS-MSI 524291 Edge      ce0
171:          0          0          0          0          0          2          0          0   ITS-MSI 524292 Edge      ce1
172:          0          0          0          0          0          0        806          0   ITS-MSI 524293 Edge      ce2
173:          0          0          0          0          0          0          0         76   ITS-MSI 524294 Edge      ce3
174:          0          0          0          0          0          0          0          0   ITS-MSI 524295 Edge      ce5
175:          0         13          0          0          0          0          0          0   ITS-MSI 524296 Edge      DP_EXT_IRQ
176:          0          0          0          0          0          0          0          0   ITS-MSI 524297 Edge      DP_EXT_IRQ
177:          0          0          0       5493          0          0          0          0   ITS-MSI 524298 Edge      DP_EXT_IRQ
178:          0          0          0          0         82          0          0          0   ITS-MSI 524299 Edge      DP_EXT_IRQ
179:          0          0          0          0          0       7204          0          0   ITS-MSI 524300 Edge      DP_EXT_IRQ
180:          0          0          0          0          0          0        672          0   ITS-MSI 524301 Edge      DP_EXT_IRQ
181:          0          0          0          0          0          0          0         30   ITS-MSI 524302 Edge      DP_EXT_IRQ

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240125-topic-sm8650-upstream-pcie-its-v1-1-cb506deeb43e@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-02-02 18:35:20 -06:00
Hui Liu
8385383cc2 arm64: dts: qcom: qcm6490-idp: Add definition for three LEDs
Add definition for three LEDs to make sure they can
be enabled base on QCOM LPG LED driver.

Signed-off-by: Hui Liu <quic_huliu@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240126-lpg-v6-1-f879cecbce69@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-02-02 18:31:38 -06:00
Neil Armstrong
63b78ca1a7 arm64: dts: qcom: sm8650-qrd: add USB-C Altmode Support
Add the necessary nodes to support the USB-C Altmode path by
adding the following
- WCD939x USBSS Mux I2C device
- nb7vpq904m Redriver I2C device
- Port/Endpoint graph links bettween PMIC-Glink, Mux, Redriver and USB PHY nodes.

WCD939x USBSS port 2 Path to Codec will be added later when Audio support
is added.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240123-topic-sm8650-upstream-altmode-v3-1-300a5ac80e1e@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-02-02 18:10:34 -06:00
Neil Armstrong
555a218d6e arm64: defconfig: enable WCD939x USBSS driver as module
Enable the Qualcomm WCD939x USBSS Type-C mux as module as
is now used on the SM8650 QRD platform.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240123-topic-sm8650-upstream-altmode-v3-2-300a5ac80e1e@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-02-02 18:10:00 -06:00
Neil Armstrong
07dd9c7b3c arm64: defconfig: enable audio drivers for SM8650 QRD board
Enable the SM8650 LPASS driver and the WCD939x codec driver
as module which are used to support Audio on the SM8650 QRD board.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240125-topic-sm8650-upstream-audio-dt-v1-3-c24d23ae5763@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-02-02 18:09:54 -06:00
Bjorn Andersson
f2eace2b4d arm64: defconfig: Enable Qualcomm interconnect providers
With interconnect providers built as modules Qualcomm SM8250 and QCM2290
platforms launches init without /dev/console being backed by the debug
UART.

Build there drivers into the kernel, to make sure the dependencies for
the UART driver are available and thereby give userspace access to the
UART without having to re-open the console, once the deferred UART
driver has probed.

Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240201-enable-icc-8250-2290-v1-1-8ded02750521@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-02-02 18:09:34 -06:00
Neil Armstrong
f6afb821e0 arm64: dts: qcom: sm8550-qrd: enable Touchscreen
Add Goodix Berlin touchscreen controller node for the SM8550 QRD
connected to the SPI4 controller.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240131-topic-sm8550-upstream-qrd8550-touch-v1-1-007f61158aa8@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-02-02 18:05:23 -06:00
Linus Torvalds
56897d5188 Tracing and eventfs fixes for v6.8:
- Fix the return code for ring_buffer_poll_wait()
   It was returing a -EINVAL instead of EPOLLERR.
 
 - Zero out the tracefs_inode so that all fields are initialized.
   The ti->private could have had stale data, but instead of
   just initializing it to NULL, clear out the entire structure
   when it is allocated.
 
 - Fix a crash in timerlat
   The hrtimer was initialized at read and not open, but is
   canceled at close. If the file was opened and never read
   the close will pass a NULL pointer to hrtime_cancel().
 
 - Rewrite of eventfs.
   Linus wrote a patch series to remove the dentry references in the
   eventfs_inode and to use ref counting and more of proper VFS
   interfaces to make it work.
 
 - Add warning to put_ei() if ei is not set to free. That means
   something is about to free it when it shouldn't.
 
 - Restructure the eventfs_inode to make it more compact, and remove
   the unused llist field.
 
 - Remove the fsnotify*() funtions for when the inodes were being created
   in the lookup code. It doesn't make sense to notify about creation
   just because something is being looked up.
 
 - The inode hard link count was not accurate. It was being updated
   when a file was looked up. The inodes of directories were updating
   their parent inode hard link count every time the inode was created.
   That means if memory reclaim cleaned a stale directory inode and
   the inode was lookup up again, it would increment the parent inode
   again as well. Al Viro said to just have all eventfs directories
   have a hard link count of 1. That tells user space not to trust it.
 -----BEGIN PGP SIGNATURE-----
 
 iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZb1l/RQccm9zdGVkdEBn
 b29kbWlzLm9yZwAKCRAp5XQQmuv6qk6jAQDmecDOnx+j/Rm5krbX/meVPYXFj2CU
 1wO7w1HBzopsBwEA5AjTKm9IGrl/eVG/+jViS165b+sJfwEcblHEFPWcIwo=
 =uUzb
 -----END PGP SIGNATURE-----

Merge tag 'trace-v6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace

Pull tracing and eventfs fixes from Steven Rostedt:

 - Fix the return code for ring_buffer_poll_wait()

   It was returing a -EINVAL instead of EPOLLERR.

 - Zero out the tracefs_inode so that all fields are initialized.

   The ti->private could have had stale data, but instead of just
   initializing it to NULL, clear out the entire structure when it is
   allocated.

 - Fix a crash in timerlat

   The hrtimer was initialized at read and not open, but is canceled at
   close. If the file was opened and never read the close will pass a
   NULL pointer to hrtime_cancel().

 - Rewrite of eventfs.

   Linus wrote a patch series to remove the dentry references in the
   eventfs_inode and to use ref counting and more of proper VFS
   interfaces to make it work.

 - Add warning to put_ei() if ei is not set to free. That means
   something is about to free it when it shouldn't.

 - Restructure the eventfs_inode to make it more compact, and remove the
   unused llist field.

 - Remove the fsnotify*() funtions for when the inodes were being
   created in the lookup code. It doesn't make sense to notify about
   creation just because something is being looked up.

 - The inode hard link count was not accurate.

   It was being updated when a file was looked up. The inodes of
   directories were updating their parent inode hard link count every
   time the inode was created. That means if memory reclaim cleaned a
   stale directory inode and the inode was lookup up again, it would
   increment the parent inode again as well. Al Viro said to just have
   all eventfs directories have a hard link count of 1. That tells user
   space not to trust it.

* tag 'trace-v6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  eventfs: Keep all directory links at 1
  eventfs: Remove fsnotify*() functions from lookup()
  eventfs: Restructure eventfs_inode structure to be more condensed
  eventfs: Warn if an eventfs_inode is freed without is_freed being set
  tracing/timerlat: Move hrtimer_init to timerlat_fd open()
  eventfs: Get rid of dentry pointers without refcounts
  eventfs: Clean up dentry ops and add revalidate function
  eventfs: Remove unused d_parent pointer field
  tracefs: dentry lookup crapectomy
  tracefs: Avoid using the ei->dentry pointer unnecessarily
  eventfs: Initialize the tracefs inode properly
  tracefs: Zero out the tracefs_inode when allocating it
  ring-buffer: Clean ring_buffer_poll_wait() error return
2024-02-02 15:32:58 -08:00
Linus Torvalds
6b89b6af45 gfs2: revert this broken commit
-----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCAAyFiEEJZs3krPW0xkhLMTc1b+f6wMTZToFAmW9FuAUHGFncnVlbmJh
 QHJlZGhhdC5jb20ACgkQ1b+f6wMTZTpX2A//ZE1Tb/YHSqiVHvUSH0YFyKc50H24
 Q3KqNH7LHRKBBIyIUJxZ2QaYsmmGPQqaB3RDAAQoItYb6mXaJQR0qIAxfKmcaUec
 genFrJNuaICIq/U+cQeAypnRSvOhnMfsY9c/jFPCZI72bS8mMDcGC1vvJW+R1N1V
 c5VAGuI/W1hkYOaVba3CkQ7sKcV/P+qbCI6dHB7DuCMr8L0foftItz0NIQ7tL9VM
 PMRtcUSehgsiDSH7HthvmHvC2bfBXgjgXTde9f5aqMoBkJE/QuCl4W3FCChcAFLg
 bxy1Ke6z4SF6N70BiKj+enSBDUVljOZOd/5IZOUPd6BuDcKDK/vKX6Vva5xYjnJ2
 iZOBdGFoPVAmevt9iXPehMdoWcEZOZeHzBV82+k9My5wjWdLWp6ZtFQ/zhvt42YN
 Z0EWPIKqxN4xSpQFEjczlKA1IWPv6YJTJJBPaCS86rBduU/cMvSwVFGnk3XnES2o
 k4fyBF6UUYUe3tCD0E6NfBJCgHiq4V1ZjMMXiXKAUUe6L5zSIucjws27l3VZofFo
 abjE/wxR5ad+3T0rt0sx+gFD8aiCzqKYaHgHHYAbofUXiTpEt7gMNhtNGlzUudO9
 KpkAiWGHtYUlDP1qIWR8lHTdf8Vj6KpCrcuyPVDIjWb9im6rC+6fh63PE9ddrLfI
 CqjwSoFOXRGEjm0=
 =Qv1t
 -----END PGP SIGNATURE-----

Merge tag 'gfs2-v6.8-rc2-revert' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2

Pull gfs2 revert from Andreas Gruenbacher:
 "It turns out that the commit to use GL_NOBLOCK flag for non-blocking
  lookups has several issues, and not all of them have a simple fix"

* tag 'gfs2-v6.8-rc2-revert' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
  Revert "gfs2: Use GL_NOBLOCK flag for non-blocking lookups"
2024-02-02 15:30:33 -08:00
Johan Hovold
96ed79791b PCI/AER: Clean up version indentation in ABI docs
The 'KernelVersion' lines use a single space as separator instead of a tab
so the values are not aligned with the other AER attribute fields.

Link: https://lore.kernel.org/r/20240202131635.11405-3-johan+linaro@kernel.org
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2024-02-02 17:21:40 -06:00
Johan Hovold
0e7d29a39a PCI/AER: Fix rootport attribute paths in ABI docs
The 'aer_stats' directory never made it into the sixth and final revision
of the series adding the sysfs AER attributes.

Link: https://lore.kernel.org/r/20240202131635.11405-2-johan+linaro@kernel.org
Link: https://lore.kernel.org/lkml/20180621184822.GB14136@bhelgaas-glaptop.roam.corp.google.com/
Fixes: 12833017e5 ("PCI/AER: Add sysfs attributes for rootport cumulative stats")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2024-02-02 17:21:10 -06:00
Jeffrey Hugo
d22118f005 dt-bindings: clock: qcom: Fix @codeaurora email in Q6SSTOP
The servers for the @codeaurora domain are long retired and any messages
addressed there will bounce.  Govind Singh has left the company which
appears to leave the Q6SSTOP clock controller binding unmaintained.

Move maintenance of the binding to the Qualcomm Clock Drivers maintainer
as suggested by Bjorn Andersson.

Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://lore.kernel.org/r/20240202171915.4101842-1-quic_jhugo@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-02-02 17:15:13 -06:00
Aren Moynihan
aa08a0d10f power: supply: axp20x_usb_power: enable usb_type reporting
The axp803 and axp813 chips can report the detected USB BC mode. SDP,
CDP, and DCP are supported.

Signed-off-by: Aren Moynihan <aren@peacevolution.org>
Link: https://lore.kernel.org/r/20240130203714.3020464-5-aren@peacevolution.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2024-02-02 23:21:53 +01:00
Aren Moynihan
06a807e6e5 power: supply: axp20x_usb_power: fix race condition with usb bc
When input_current_limit is set while USB BC is in progress, the BC
module will overwrite the value that was set when it finishes detection.

Signed-off-by: Aren Moynihan <aren@peacevolution.org>
Link: https://lore.kernel.org/r/20240130203714.3020464-4-aren@peacevolution.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2024-02-02 23:21:53 +01:00
Aren Moynihan
b02fbd830e power: supply: axp20x_usb_power: use correct register for input current limit
On the axp803 and axp813 chips register 0x30 bits 0-1 is the default
current limit that gets applied after the pmic detects a CDP or DCP
port. The correct field to set is 0x35 bits 4-7.

This field only has nine values (out of the 16 possible if it used all
the bits), so introduce a field size variable to take that into account.

Signed-off-by: Aren Moynihan <aren@peacevolution.org>
Link: https://lore.kernel.org/r/20240130203714.3020464-3-aren@peacevolution.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2024-02-02 23:21:53 +01:00
Aren Moynihan
bec924d27a power: supply: axp20x_usb_power: replace current_max with input_current_limit
The current_max property is supposed to be read-only, and represent the
maximum current the supply can provide. input_current_limit is the
limit that is currently set, which is what we have here.

When determining what value to write to the register, we need to pick a
reasonable value if the requested limit doesn't exactly match one
supported by the hardware. If the requested limit is less than the
lowest value we can set, round up to the lowest value. Otherwise round
down to the nearest value supported by hardware.

Also add a dev field to the axp20x_usb_power struct, so we can use
dev_dbg and dev_err in more places.

Signed-off-by: Aren Moynihan <aren@peacevolution.org>
Link: https://lore.kernel.org/r/20240130203714.3020464-2-aren@peacevolution.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2024-02-02 23:21:53 +01:00
Shung-Hsi Yu
a68b50f47b selftests/bpf: trace_helpers.c: do not use poisoned type
After commit c698eaebdf ("selftests/bpf: trace_helpers.c: Optimize
kallsyms cache") trace_helpers.c now includes libbpf_internal.h, and
thus can no longer use the u32 type (among others) since they are poison
in libbpf_internal.h. Replace u32 with __u32 to fix the following error
when building trace_helpers.c on powerpc:

  error: attempt to use poisoned "u32"

Fixes: c698eaebdf ("selftests/bpf: trace_helpers.c: Optimize kallsyms cache")
Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20240202095559.12900-1-shung-hsi.yu@suse.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2024-02-02 14:14:03 -08:00
Mingwei Zhang
05519c86d6 KVM: x86/pmu: Fix type length error when reading pmu->fixed_ctr_ctrl
Use a u64 instead of a u8 when taking a snapshot of pmu->fixed_ctr_ctrl
when reprogramming fixed counters, as truncating the value results in KVM
thinking fixed counter 2 is already disabled (the bug also affects fixed
counters 3+, but KVM doesn't yet support those).  As a result, if the
guest disables fixed counter 2, KVM will get a false negative and fail to
reprogram/disable emulation of the counter, which can leads to incorrect
counts and spurious PMIs in the guest.

Fixes: 76d287b234 ("KVM: x86/pmu: Drop "u8 ctrl, int idx" for reprogram_fixed_counter()")
Cc: stable@vger.kernel.org
Signed-off-by: Mingwei Zhang <mizhang@google.com>
Link: https://lore.kernel.org/r/20240123221220.3911317-1-mizhang@google.com
[sean: rewrite changelog to call out the effects of the bug]
Signed-off-by: Sean Christopherson <seanjc@google.com>
2024-02-02 14:07:27 -08:00
Arnd Bergmann
774ef5dfc9 drm/xe: circumvent bogus stringop-overflow warning
gcc-13 warns about an array overflow that it sees but that is
prevented by the "asid % NUM_PF_QUEUE" calculation:

drivers/gpu/drm/xe/xe_gt_pagefault.c: In function 'xe_guc_pagefault_handler':
include/linux/fortify-string.h:57:33: error: writing 16 bytes into a region of size 0 [-Werror=stringop-overflow=]
include/linux/fortify-string.h:689:26: note: in expansion of macro '__fortify_memcpy_chk'
  689 | #define memcpy(p, q, s)  __fortify_memcpy_chk(p, q, s,                  \
      |                          ^~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/xe/xe_gt_pagefault.c:341:17: note: in expansion of macro 'memcpy'
  341 |                 memcpy(pf_queue->data + pf_queue->tail, msg, len * sizeof(u32));
      |                 ^~~~~~
drivers/gpu/drm/xe/xe_gt_types.h:102:25: note: at offset [1144, 265324] into destination object 'tile' of size 8

I found that rewriting the assignment using pointer addition rather than the
equivalent array index calculation prevents the warning, so use that instead.

I sent a bug report against gcc for the false positive warning.

Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=113214
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240103114819.2913937-1-arnd@kernel.org
2024-02-02 14:01:12 -08:00
Ville Syrjälä
35396cd3ef drm/i915/fbc: Allow FBC with CCS modifiers on SKL+
Only display workarounds 0391 and 0475 call for disabling
FBC with render compression, and those are listed only for
pre-prod SKL steppings. So it should be safe to enable
FB+CCS on production hardware.

AFAIK CCS is limited to 50% bandwidth reduction (perhaps
clear color can do better?). FBC can exceed that number
by quite a bit, given the right kind of framebuffer
contents. So piling on both kinds of compressions could
still make sense.

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/10125
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240123090244.30025-1-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-02-02 23:56:52 +02:00
Jessica Zhang
3d94e75844 dt-bindings: visionox-rm69299: Update maintainers
The current maintainer (Harigovindan P) is no longer reachable through
the listed email. Update maintainers list to be Abhinav and I.

Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240202-rm69299-maintainers-v1-1-423aa40f344f@quicinc.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240202-rm69299-maintainers-v1-1-423aa40f344f@quicinc.com
2024-02-02 22:31:25 +01:00