Christoph Hellwig <hch@lst.de> says:
I've recently been looking at the XFS fallocate implementation and got
upset about the messing parsing of the mode argument, which mixes modes
and an optional flag in a really confusing way.
This series tries to clean this up by better defining what is the
operation mode and what is an optional flag, so that both the core
code and file systems can use switch statements to switch on the mode.
* patches from https://lore.kernel.org/r/20240827065123.1762168-1-hch@lst.de:
xfs: refactor xfs_file_fallocate
xfs: move the xfs_is_always_cow_inode check into xfs_alloc_file_space
xfs: call xfs_flush_unmap_range from xfs_free_file_space
fs: sort out the fallocate mode vs flag mess
ext4: remove tracing for FALLOC_FL_NO_HIDE_STALE
block: remove checks for FALLOC_FL_NO_HIDE_STALE
Link: https://lore.kernel.org/r/20240827065123.1762168-1-hch@lst.de
Signed-off-by: Christian Brauner <brauner@kernel.org>
Refactor xfs_file_fallocate into separate helpers for each mode,
two factors for i_size handling and a single switch statement over the
supported modes.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240827065123.1762168-7-hch@lst.de
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Move the xfs_is_always_cow_inode check from the caller into
xfs_alloc_file_space to prepare for refactoring of xfs_file_fallocate.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240827065123.1762168-6-hch@lst.de
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Call xfs_flush_unmap_range from xfs_free_file_space so that
xfs_file_fallocate doesn't have to predict which mode will call it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240827065123.1762168-5-hch@lst.de
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
The fallocate system call takes a mode argument, but that argument
contains a wild mix of exclusive modes and an optional flags.
Replace FALLOC_FL_SUPPORTED_MASK with FALLOC_FL_MODE_MASK, which excludes
the optional flag bit, so that we can use switch statement on the value
to easily enumerate the cases while getting the check for duplicate modes
for free.
To make this (and in the future the file system implementations) more
readable also add a symbolic name for the 0 mode used to allocate blocks.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240827065123.1762168-4-hch@lst.de
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
FALLOC_FL_NO_HIDE_STALE can't make it past vfs_fallocate (and if the
flag does what the name implies that's a good thing as it would be
highly dangerous). Remove the dead tracing code for it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240827065123.1762168-3-hch@lst.de
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
While the FALLOC_FL_NO_HIDE_STALE value has been registered, it has
always been rejected by vfs_fallocate before making it into
blkdev_fallocate because it isn't in the supported mask.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240827065123.1762168-2-hch@lst.de
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
The bio->bi_iter.bi_size is updated when bio_add_page() is called. So we
do not need to assign msg->bi_size again to it, since its redudant and
can also be harmful. Instead we can use it to add a sanity check, which
checks the locally calculated bi_size, with the one sent in msg.
Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Grzegorz Prajsner <grzegorz.prajsner@ionos.com>
Link: https://lore.kernel.org/r/20240809135346.978320-1-haris.iqbal@ionos.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
On error, blkdev_issue_write_zeroes used to recheck the block device's
WRITE SAME queue limits after submitting WRITE SAME bios. As stated in
the comment, the purpose of this was to collapse all IO errors to
EOPNOTSUPP if the effect of issuing bios was that WRITE SAME got turned
off in the queue limits. Therefore, it does not make sense to reuse the
zeroes limit that was read earlier in the function because we only care
about the queue limit *now*, not what it was at the start of the
function.
Found by running generic/351 from fstests.
Fixes: 64b582ca88 ("block: Read max write zeroes once for __blkdev_issue_write_zeroes()")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240827175340.GB1977952@frogsfrogsfrogs
Signed-off-by: Jens Axboe <axboe@kernel.dk>
I haven't been able to follow or review the work on the driver for some
time now and I don't see the situation improving anytime soon. I'd like
to continue being listed as a reviewer.
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Acked-by: Maíra Canal <mcanal@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240525142637.82586-1-melissa.srw@gmail.com
For non-d3cold-capable devices we'd like to be able to wake up the
device from reclaim. In particular, for Lunar Lake we'd like to be
able to blit CCS metadata to system at shrink time; at least from
kswapd where it's reasonable OK to wait for rpm resume and a
preceding rpm suspend.
Therefore use a separate lockdep map for such devices and prime it
reclaim-tainted.
v2:
- Rename lockmap acquire- and release functions. (Rodrigo Vivi).
- Reinstate the old xe_pm_runtime_lockdep_prime() function and
rename it to xe_rpm_might_enter_cb(). (Matthew Auld).
- Introduce a separate xe_pm_runtime_lockdep_prime function
called from module init for known required locking orders.
v3:
- Actually hook up the prime function at module init.
v4:
- Rebase.
v5:
- Don't use reclaim-safe RPM with sriov.
Cc: "Vivi, Rodrigo" <rodrigo.vivi@intel.com>
Cc: "Auld, Matthew" <matthew.auld@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240826143450.92511-1-thomas.hellstrom@linux.intel.com
The SoM board has reserved HDMI output, while the Radxa E25
is not connected. So disable the display subsystem only for
Radxa E25.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/20240820120020.469375-1-amadeus@jmu.edu.cn
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Drop unsupported features on smu v14_0_2.
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3376f922bf)
Enable pcie2x1l2 and related combphy/regulator routed to M.2 E key
connector on Radxa ROCK 5A.
Tested with Radxa Wireless Module A8:
$ lspci
0004:40:00.0 PCI bridge: Rockchip Electronics Co., Ltd RK3588 (rev 01)
0004:41:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8852BE PCIe 802.11ax Wireless Network Controller
$ ip l
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: end0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000
link/ether c2:58:fc:70:55:86 brd ff:ff:ff:ff:ff:ff
3: wlP4p65s0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 2c:05:47:65:5b:ed brd ff:ff:ff:ff:ff:ff
$ lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 1a40:0101 Terminus Technology Inc. Hub
Bus 001 Device 003: ID 0bda:b85b Realtek Semiconductor Corp. Bluetooth Radio
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 006 Device 002: ID 0789:0336 Logitec Corp. LMD USB Device
Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
$ hciconfig
hci0: Type: Primary Bus: USB
BD Address: 2C:05:47:65:5B:EE ACL MTU: 1021:6 SCO MTU: 255:12
UP RUNNING
RX bytes:2698 acl:0 sco:0 events:329 errors:0
TX bytes:69393 acl:0 sco:0 commands:329 errors:0
Signed-off-by: FUKAUMI Naoki <naoki@radxa.com>
Link: https://lore.kernel.org/r/20240826080456.525-1-naoki@radxa.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add p2s table support for a new revision of SMUv13.0.6.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 010cc730ac)
Instead of using state->fb->obj[0] directly, get object from framebuffer
by calling drm_gem_fb_get_obj() and return error code when object is
null to avoid using null object of framebuffer.
Fixes: 5d945cbcd4 ("drm/amd/display: Create a file dedicated to planes")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 73dd0ad9e5)
There is no "on-board WLAN/BT chip" on Radxa ROCK 5A. remove related
properties.
Fixes: 1642bf66e2 ("arm64: dts: rockchip: add USB2 to rk3588s-rock5a")
Signed-off-by: FUKAUMI Naoki <naoki@radxa.com>
Link: https://lore.kernel.org/r/20240826075130.546-1-naoki@radxa.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This needs to be set to 1 to avoid a potential deadlock in
the GC 10.x and newer. On GC 9.x and older, this needs
to be set to 0. This can lead to hangs in some mixed
graphics and compute workloads.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3575
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 40318a2406)
update message interface for smu v14.0.2/3
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 01bfabc2d1)
Always reprogram the hardware state on init. This ensures
the PMFW state is explicitly programmed and we are not relying
on the default PMFW state.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3131
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit c50fe289ed)
Cc: stable@vger.kernel.org
The kernel doc says you need to select manual mode to
adjust this, but the code only allows you to adjust it when
manual mode is not selected. Remove the manual mode check.
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit bbb05f8a9c)
Cc: stable@vger.kernel.org
This adds GENMASK_U128() tests although currently only 64 bit wide masks
are being tested.
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
This adds GENMASK_U128() and __GENMASK_U128() macros using __BITS_PER_U128
and __int128 data types. These macros will be used in providing support for
generating 128 bit masks.
The macros wouldn't work in all assembler flavors for reasons described
in the comments on top of declarations. Enforce it for more by adding
!__ASSEMBLY__ guard.
Cc: Yury Norov <yury.norov@gmail.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Arnd Bergmann <arnd@arndb.de>>
Cc: linux-kernel@vger.kernel.org
Cc: linux-arch@vger.kernel.org
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
This documents LCKFB Taishan Pi which is a SBC based on the RK3566 SoC.
Signed-off-by: Junhao Xie <bigfoot@classfun.cn>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240826044530.726458-3-bigfoot@classfun.cn
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Remove TTM_TT_FLAG_CLEARED_ON_FREE now that XE stopped using this
flag.
This reverts commit decbfaf06d.
Cc: Christian König <christian.koenig@amd.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240828083635.23601-2-nirmoy.das@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
This optimization relied on having to clear CCS on allocations.
If there is no need to clear CCS on allocations then this would mostly
help in reducing CPU utilization.
Revert this patch at this moment because of:
1 Currently Xe can't do clear on free and using a invalid ttm flag,
TTM_TT_FLAG_CLEARED_ON_FREE which could poison global ttm pool on
multi-device setup.
2 Also for LNL CPU:WB doesn't require clearing CCS as such BO will
not be allowed to bind with compression PTE. Subsequent patch will
disable clearing CCS for CPU:WB BOs for LNL.
This reverts commit 2368306180.
Cc: Christian König <christian.koenig@amd.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240828083635.23601-1-nirmoy.das@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
The Hardkernel ODROID-M1S is a single-board computer based on Rockchip
RK3566 SoC. It features e.g. 4/8 GB LPDDR4 RAM, 64 GB eMMC, SD-card,
GbE LAN, HDMI 2.0, M.2 NVMe and USB 2.0/3.0.
Add initial support for eMMC, SD-card, Ethernet, HDMI, PCIe and USB.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20240827211825.1419820-5-jonas@kwiboo.se
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The Hardkernel ODROID-M1S is a single-board computer based on Rockchip
RK3566 SoC. It features e.g. 4/8 GB LPDDR4 RAM, 64 GB eMMC, SD-card,
GbE LAN, HDMI 2.0, M.2 NVMe and USB 2.0/3.0.
Add devicetree binding documentation for the Hardkernel ODROID-M1S board.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240827211825.1419820-4-jonas@kwiboo.se
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The vendor prefix for Hardkernel ODROID-M1 is incorrectly listed as
rockchip. Use the proper hardkernel vendor prefix for this board, while
at it also drop the redundant soc prefix.
Fixes: fd35832677 ("arm64: dts: rockchip: Add Hardkernel ODROID-M1 board")
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20240827211825.1419820-3-jonas@kwiboo.se
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The vendor prefix for Hardkernel ODROID-M1 is incorrectly listed as
rockchip. Use the proper hardkernel vendor prefix for this board, while
at it also drop the redundant soc prefix.
Fixes: 19cc53eb2c ("dt-bindings: rockchip: Add Hardkernel ODROID-M1 board")
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240827211825.1419820-2-jonas@kwiboo.se
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
DW_HDMA_V0_LIE and DW_HDMA_V0_RIE are initialized as BIT(3) and BIT(4)
respectively in dw_hdma_control enum. But as per HDMA register these
bits are corresponds to LWIE and RWIE bit i.e local watermark interrupt
enable and remote watermarek interrupt enable. In linked list mode LWIE
and RWIE bits only enable the local and remote watermark interrupt.
Since the watermark interrupts are not used but enabled, this leads to
spurious interrupts getting generated. So remove the code that enables
them to avoid generating spurious watermark interrupts.
And also rename DW_HDMA_V0_LIE to DW_HDMA_V0_LWIE and DW_HDMA_V0_RIE to
DW_HDMA_V0_RWIE as there is no LIE and RIE bits in HDMA and those bits
are corresponds to LWIE and RWIE bits.
Fixes: e74c39573d ("dmaengine: dw-edma: Add support for native HDMA")
cc: stable@vger.kernel.org
Signed-off-by: Mrinmay Sarkar <quic_msarkar@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/1724674261-3144-3-git-send-email-quic_msarkar@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The current logic is enabling both STOP_INT_MASK and ABORT_INT_MASK
bit. This is apparently masking those particular interrupts rather than
unmasking the same. If the interrupts are masked, they would never get
triggered.
So fix the issue by unmasking the STOP and ABORT interrupts properly.
Fixes: e74c39573d ("dmaengine: dw-edma: Add support for native HDMA")
cc: stable@vger.kernel.org
Signed-off-by: Mrinmay Sarkar <quic_msarkar@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/1724674261-3144-2-git-send-email-quic_msarkar@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add compatible string "fsl,imx8qxp-dma-apbh". It requires power-domains
compared with "fsl,imx28-dma-apbh".
Allow 'power-domains' property because i.MX8DXL i.MX8QM and i.MX8QXP need
it.
Keep the same restriction about 'power-domains' for other compatible
strings.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240801214601.2620843-1-Frank.Li@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Commit fd4ebc07b4 ("regmap: Hold the regmap lock when allocating and
freeing the cache") introduced a locking around the allocating and
freeing a regmap cache, so adjust the memory allocation flags to the ones
given in the regmap configuration instead of the hardcoded GFP_KERNEL.
This fixes the "BUG: sleeping function called from invalid context"
introduced by the mentioned commit.
Fixes: fd4ebc07b4 ("regmap: Hold the regmap lock when allocating and freeing the cache")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://patch.msgid.link/20240828122834.3778031-1-m.szyprowski@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the IS_ERR_OR_NULL() helper instead of open-coding a
NULL and an error pointer checks to simplify the code and
improve readability.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Link: https://patch.msgid.link/20240828122829.3697502-1-lihongbo22@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This adds the necessary device tree changes to enable analog audio
output for the 3.5 mm TRS headphone jack on the Radxa ROCK 4C+ with
its RK809 audio codec.
Signed-off-by: Jonathan Liu <net147@gmail.com>
Link: https://lore.kernel.org/r/20240828074755.1320692-1-net147@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Fix cifs_file_copychunk_range() to flush the destination region before
invalidating it to avoid potential loss of data should the copy fail, in
whole or in part, in some way.
Fixes: 7b2404a886 ("cifs: Fix flushing, invalidation and file size with copy_file_range()")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Steve French <stfrench@microsoft.com>
cc: Paulo Alcantara <pc@manguebit.com>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Matthew Wilcox <willy@infradead.org>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: linux-mm@kvack.org
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Short DIO reads, particularly in relation to cifs, are not being handled
correctly by cifs and netfslib. This can be tested by doing a DIO read of
a file where the size of read is larger than the size of the file. When it
crosses the EOF, it gets a short read and this gets retried, and in the
case of cifs, the retry read fails, with the failure being translated to
ENODATA.
Fix this by the following means:
(1) Add a flag, NETFS_SREQ_HIT_EOF, for the filesystem to set when it
detects that the read did hit the EOF.
(2) Make the netfslib read assessment stop processing subrequests when it
encounters one with that flag set.
(3) Return rreq->transferred, the accumulated contiguous amount read to
that point, to userspace for a DIO read.
(4) Make cifs set the flag and clear the error if the read RPC returned
ENODATA.
(5) Make cifs set the flag and clear the error if a short read occurred
without error and the read-to file position is now at the remote inode
size.
Fixes: 69c3c023af ("cifs: Implement netfslib hooks")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Steve French <sfrench@samba.org>
cc: Paulo Alcantara <pc@manguebit.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
When netfslib asks cifs to issue a read operation, it prefaces this with a
call to ->clamp_length() which cifs uses to negotiate credits, providing
receive capacity on the server; however, in the event that a read op needs
reissuing, netfslib doesn't call ->clamp_length() again as that could
shorten the subrequest, leaving a gap.
This causes the retried read to be done with zero credits which causes the
server to reject it with STATUS_INVALID_PARAMETER. This is a problem for a
DIO read that is requested that would go over the EOF. The short read will
be retried, causing EINVAL to be returned to the user when it fails.
Fix this by making cifs_req_issue_read() negotiate new credits if retrying
(NETFS_SREQ_RETRYING now gets set in the read side as well as the write
side in this instance).
This isn't sufficient, however: the new credits might not be sufficient to
complete the remainder of the read, so also add an additional field,
rreq->actual_len, that holds the actual size of the op we want to perform
without having to alter subreq->len.
We then rely on repeated short reads being retried until we finish the read
or reach the end of file and make a zero-length read.
Also fix a couple of places where the subrequest start and length need to
be altered by the amount so far transferred when being used.
Fixes: 69c3c023af ("cifs: Implement netfslib hooks")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Steve French <sfrench@samba.org>
cc: Paulo Alcantara <pc@manguebit.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
SEV-SNP support is present since commit 1dfe571c12 ("KVM: SEV: Add
initial SEV-SNP support") but Kconfig entry wasn't updated and still
mentions SEV and SEV-ES only. Add SEV-SNP there and, while on it, expand
'SEV' in the description as 'Encrypted VMs' is not what 'SEV' stands for.
No functional change.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20240828122111.160273-1-vkuznets@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
The timeout used when waiting for transfer's completion is always set to
HZ. This isn't enough if a transfer is too large or if the bus speed is
too low.
Use the bus speed and the transfer length to calculate an appropriate
timeout
Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20240828063131.10507-1-bastien.curutchet@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
RK3588 has 4 Hantro G1 encoder-only cores. They are all independent IP,
but can be used as a cluster (i.e. sharing work between the cores).
These cores are called VEPU121 in the TRM. The TRM describes one more
VEPU121, but that is combined with a Hantro H1. That one will be handled
using the VPU binding instead.
Signed-off-by: Emmanuel Gil Peyrot <linkmauve@linkmauve.fr>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20240827181206.147617-2-sebastian.reichel@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Since commit be4c9bad9d ("MAINTAINERS: Add cxgb4 and iw_cxgb4 entries")
c4iw_post_terminate() declaration is not used anymore.
And other declarations were never implemented since introduction in
commit cfdda9d764 ("RDMA/cxgb4: Add driver for Chelsio T4 RNIC").
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Link: https://patch.msgid.link/20240824091629.3659565-1-yuehaibing@huawei.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
No functional changes.
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Alexei Pastuchov <alexei.pastuchov@ionos.com>
Signed-off-by: Grzegorz Prajsner <grzegorz.prajsner@ionos.com>
Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Link: https://patch.msgid.link/20240821112217.41827-12-haris.iqbal@ionos.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
