Check size of WGDS revision 3 is equal to 8 entries size with some header,
but doesn't depend on the number of used entries. Check that used entries
are between min and max but allow more to be present than are used to fix
operation with some BIOSes that have such data.
Fixes: 97f8a3d161 ("iwlwifi: ACPI: support revision 3 WGDS tables")
Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240825191257.cc71dfc67ec3.Ic27ee15ac6128b275c210b6de88f2145bd83ca7b@changeid
[edit commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
iwl_mvm_select_links is called by the link selection worker and it
requires the mutex.
Take it in the link selection worker.
This logic used to run from iwl_mvm_rx_umac_scan_complete_notif which
had the mvm->mutex held. This was changed to run in a worker holding the
wiphy mutex, but we also need the mvm->mutex.
Fixes: 2e194efa38 ("wifi: iwlwifi: mvm: Fix race in scan completion")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240825191257.0cacecd5db1e.Iaca38a078592b69bdd06549daf63408ccf1810e4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The calculation should consider also the 6GHz IE's len, fix that.
In addition, in iwl_mvm_sched_scan_start() the scan_fits helper is
called only in case non_psc_incldued is true, but it should be called
regardless, fix that as well.
Signed-off-by: Daniel Gabay <daniel.gabay@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240825191257.7db825442fd2.I99f4d6587709de02072fd57957ec7472331c6b1d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fast resume is a feature that was recently introduced to speed up the
resume time. It basically keeps the firmware alive while the system
is suspended and that avoids starting again the whole device.
This flow can't work for hibernation, since when the system boots,
before the frozen image is loaded, the kernel may touch the device. As a
result, we can't assume the device is in the exact same state as before
the hibernation.
Detect that we are resuming from hibernation through the PCI device and
forbid the fast resume flow. We also need to shut down the device
cleanly when that happens.
In addition, in case the device is power gated during S3, we won't be
able to keep the device alive. Detect this situation with BE200 at least
with the help of the CSR_FUNC_SCRATCH register and reset the device upon
resume if it was power gated during S3.
Fixes: e8bb19c1d5 ("wifi: iwlwifi: support fast resume")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240825191257.24eb3b19e74f.I3837810318dbef0a0a773cf4c4fcf89cdc6fdbd3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If ParaVirt steal time feature is enabled, there is a percpu gpa address
passed from guest vCPU and host modifies guest memory space with this gpa
address. When vCPU is reset normally, it will notify host and invalidate
gpa address.
However if VM is crashed and VMM reboots VM forcely, the vCPU reboot
notification callback will not be called in VM. Host needs invalidate
the gpa address, else host will modify guest memory during VM reboots.
Here it is invalidated from the vCPU KVM_REG_LOONGARCH_VCPU_RESET ioctl
interface.
Also funciton kvm_reset_timer() is removed at vCPU reset stage, since SW
emulated timer is only used in vCPU block state. When a vCPU is removed
from the block waiting queue, kvm_restore_timer() is called and SW timer
is cancelled. And the timer register is also cleared at VMM when a vCPU
is reset.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
There exist some warnings when building kernel if CONFIG_CPU_HAS_LBT is
set but CONFIG_CPU_HAS_LSX and CONFIG_CPU_HAS_LASX are not set. In this
case, there are no definitions of _restore_lsx & _restore_lasx and there
are also no definitions of kvm_restore_lsx & kvm_restore_lasx in fpu.S
and switch.S respectively, just add some ifdefs to fix these warnings.
AS arch/loongarch/kernel/fpu.o
arch/loongarch/kernel/fpu.o: warning: objtool: unexpected relocation symbol type in .rela.discard.func_stack_frame_non_standard: 0
arch/loongarch/kernel/fpu.o: warning: objtool: unexpected relocation symbol type in .rela.discard.func_stack_frame_non_standard: 0
AS [M] arch/loongarch/kvm/switch.o
arch/loongarch/kvm/switch.o: warning: objtool: unexpected relocation symbol type in .rela.discard.func_stack_frame_non_standard: 0
arch/loongarch/kvm/switch.o: warning: objtool: unexpected relocation symbol type in .rela.discard.func_stack_frame_non_standard: 0
MODPOST Module.symvers
ERROR: modpost: "kvm_restore_lsx" [arch/loongarch/kvm/kvm.ko] undefined!
ERROR: modpost: "kvm_restore_lasx" [arch/loongarch/kvm/kvm.ko] undefined!
Cc: stable@vger.kernel.org # 6.9+
Fixes: cb8a2ef084 ("LoongArch: Add ORC stack unwinder support")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202408120955.qls5oNQY-lkp@intel.com/
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Currently we call irq_set_noprobe() in a loop for all IRQs, but indeed
it only works for IRQs below NR_IRQS_LEGACY because at init_IRQ() only
legacy interrupts have been allocated.
Instead, we can define ARCH_IRQ_INIT_FLAGS as IRQ_NOPROBE in asm/hwirq.h
and the core will automatically set the flag for all interrupts.
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Tianyang Zhang <zhangtianyang@loongson.cn>
When sending a RDMA_CM_REQUEST, the NVMe RDMA Transport Specification
allows you to populate the cntlid field in the RDMA_CM_REQUEST Private
Data.
The cntlid is returned by the target on completion of the first
RDMA_CM_REQUEST command (which creates the admin queue).
The cntlid field can then be populated by the host when the I/O queues
are created (using additional RDMA_CM_REQUEST commands), such that the
target can perform extra validation for additional RDMA_CM_REQUEST
commands.
This additional error code and error message is also added, such that
nvme_rdma_cm_msg() will display the proper error message if the target
fails the RDMA_CM_REQUEST command because of this extra validation.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Having a limit of 64 DRM devices is not good enough for modern world
where we have multi-GPU servers, SR-IOV virtual functions and virtual
devices used for testing.
Let's utilize full minor range for DRM devices.
To avoid regressing the existing userspace, we're still maintaining the
numbering scheme where 0-63 is used for primary, 64-127 is reserved
(formerly for control) and 128-191 is used for render.
For minors >= 192, we're allocating minors dynamically on a first-come,
first-served basis.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240823163048.2676257-4-michal.winiarski@intel.com
Acked-by: James Zhu <James.Zhu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Accel minor management is based on DRM (and is also using struct
drm_minor internally), since DRM is using XArray for minors, it makes
sense to also convert accel.
As the two implementations are identical (only difference being the
underlying xarray), move the accel_minor_* functionality to DRM.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Acked-by: James Zhu <James.Zhu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240823163048.2676257-3-michal.winiarski@intel.com
Signed-off-by: Christian König <christian.koenig@amd.com>
IDR is deprecated, and since XArray manages its own state with internal
locking, it simplifies the locking on DRM side.
Additionally, don't use the IRQ-safe variant, since operating on drm
minor is not done in IRQ context.
Suggested-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Acked-by: James Zhu <James.Zhu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240823163048.2676257-2-michal.winiarski@intel.com
Signed-off-by: Christian König <christian.koenig@amd.com>
There's a warning (probably on some older compiler version):
fs/btrfs/fiemap.c: warning: 'last_extent_end' may be used uninitialized in this function [-Wmaybe-uninitialized]: => 822:19
Initialize the variable to 0 although it's not necessary as it's either
properly set or not used after an error. The called function is in the
same file so this is a false alert but we want to fix all
-Wmaybe-uninitialized reports.
Link: https://lore.kernel.org/all/20240819070639.2558629-1-geert@linux-m68k.org/
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David Sterba <dsterba@suse.com>
Let the kmemdup_array() take care about multiplication
and possible overflows.
Using kmemdup_array() is more appropriate and makes the code
easier to audit.
Signed-off-by: Shen Lichuan <shenlichuan@vivo.com>
Link: https://patch.msgid.link/20240826054402.58396-1-shenlichuan@vivo.com
Signed-off-by: Mark Brown <broonie@kernel.org>
tlv320aic31xx.txt was converted to DT schema (YAML) and new file is
already matched by wildcard. This fixes get_maintainers.pl self-test
warning:
./MAINTAINERS:22739: warning: no file matches F: Documentation/devicetree/bindings/sound/tlv320aic31xx.txt
Fixes: e486feb7b8 ("ASoC: dt-bindings: convert tlv320aic31xx.txt to yaml")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240825085745.21668-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded
based on the alias from of_device_id table.
Signed-off-by: Liao Chen <liaochen4@huawei.com>
Link: https://patch.msgid.link/20240826084924.368387-5-liaochen4@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded
based on the alias from of_device_id table.
Signed-off-by: Liao Chen <liaochen4@huawei.com>
Link: https://patch.msgid.link/20240826084924.368387-4-liaochen4@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded
based on the alias from of_device_id table.
Signed-off-by: Liao Chen <liaochen4@huawei.com>
Link: https://patch.msgid.link/20240826084924.368387-3-liaochen4@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded
based on the alias from of_device_id table.
Signed-off-by: Liao Chen <liaochen4@huawei.com>
Link: https://patch.msgid.link/20240826084924.368387-2-liaochen4@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use modern string_choices API instead of manually determining the
output using ternary operator.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240821120458.3702655-1-andriy.shevchenko@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The scope of uncore control is per power domain with TPMI.
There are two types of processor topologies can be presented by CPUID
extended topology leaf irrespective of the hardware architecture:
1. A die is not enumerated in CPUID. In this case there is only one die
in a package is visible. In this case there can be multiple power domains
in a single die.
2. A power domain in a package is enumerated as a die in CPUID. So
there is one power domain per die.
To allow die level controls, the current implementation creates a root
domain and aggregates all information from power domains in it. This
is well suited for configuration 1 above.
But for configuration 2 above, the root domain will present the same
information as present by power domain. So, no use of aggregating. To
check the configuration, call topology_max_dies_per_package(). If it is
more than one, avoid creating root domain.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240820204558.1296319-1-srinivas.pandruvada@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Extend the searching for the test files so that it works when running
perf from a separate objdir, and also when the perf executable is
symlinked.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240813213651.1057362-2-ak@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
According to the context, the function description for fake_commit
should be "prevent the atomic states from being freed too early"
Signed-off-by: renjun wang <renjunw0@foxmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/tencent_6EF2603DCCFAD6A8265F8AAD9D6D5BCB9309@qq.com
ARL and MTL share a single GSC firmware blob. However, ARL requires a
newer version of it.
So add differentiate of the PCI ids for ARL from MTL and create ARL as
a sub-platform of MTL. That way, all the existing workarounds and such
still treat ARL as MTL exactly as before. However, now the GSC code
can check for ARL and do an extra version check on the firmware before
committing to it.
Also, the version extraction code has various ways of failing but the
return code was being ignore and so the firmware load would attempt to
continue anyway. Fix that by propagating the return code to the next
level out.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Fixes: 213c43676b ("drm/i915/mtl: Remove the 'force_probe' requirement for Meteor Lake")
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240802031051.3816392-1-John.C.Harrison@Intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The v4l2_subdev_link_validate() helper prints a warning if the
.link_validate() operation is not implemented for video devices
connected to the subdevs. Implement the operation to silence the
warning.
Ideally validation of the link between the video device and the subdev
should be implemented in that operation. That would however break
userspace that does not configure formats on all video devices before
starting streaming. While this mode of operation may not be considered
valid by the V4L2 API specification (interpretation differ), it is
nonetheless supported by the vsp1 driver at the moment and used by at
least the vsp1 unit test suite, and possibly other userspace
applications. Removing it would be a regression.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
The v4l2_subdev_link_validate() helper function is meant to be used as a
drop-in implementation of a V4L2 subdev entity .link_validate() handler.
It supports subdev-to-subdev links only, and complains if one end of the
link is not a subdev. This forces drivers that have video output devices
connected to subdevs to implement a custom .link_validate() handler,
calling v4l2_subdev_link_validate() for the subdev-to-subdev links, and
performing manual link validation for the video-to-subdev links.
Video devices embed a media entity, and therefore also have a
.link_validate() operation. For video capture devices, the operation
should be manually implemented by drivers for validate the
subdev-to-video links. For video output devices, on the other hand, that
operation is never called, as link validation is performed in the
context of the sink entity.
As a result, we end up forcing drivers to implement a custom
.link_validate() handler for subdevs connected to video output devices,
when the video devices provide an operation that could be used for that
purpose.
To improve that situation, make v4l2_subdev_link_validate() delegate
link validation to the source's .link_validate() operation when the link
source is a video device and the link sink is a subdev. This allows
broader usage of v4l2_subdev_link_validate(), and simplifies drivers by
making video device link validation easy to implement in the video
device .link_validate(), regardless of whether the video device is an
output device or a capture device.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
The v4l2_subdev_link_validate() function prints a one-time warning if it
gets called on a link whose source or sink is not a subdev. As links get
validated in the context of their sink, a call to the helper when the
link's sink is not a subdev indicates that the driver has set its
.link_validate() handler to v4l2_subdev_link_validate() on a non-subdev
entity, which is a clear driver bug. On the other hand, the link's
source not being a subdev indicates that the helper is used for a subdev
connected to a video output device, which is a lesser issue, if only
because this is currently common practice.
There are no drivers left in the kernel that use
v4l2_subdev_link_validate() in a context where it may get called on a
non-subdev sink. Replace the pr_warn_once() with a WARN_ON_ONCE() in
this case to make sure that new offenders won't be introduced.
A subsequent change will improve the v4l2_subdev_link_validate() helper
to properly support validating video device to subdev links.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
The v4l2_subdev_link_validate() function is a helper designed to
validate links whose sink is a subdev. When called on a link whose sink
is a video device, it only prints a warning and returns. Its usage in
the sun4i_csi driver is wrong, leaving the link from the sub4i_csi
subdev to the capture video device unvalidated.
Planned improvements to the v4l2_subdev_link_validate() function will
turn the warning into an error, breaking the sun4i_csi driver. As an
interim measure, move the warning to the sun4i_csi driver in a custom
validation handler, and drop the call to the helper.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
The sun4i_csi driver doesn't implement link validation for the subdev it
registers, leaving the link between the subdev and its source
unvalidated. Fix it, using the v4l2_subdev_link_validate() helper.
Fixes: 577bbf23b7 ("media: sunxi: Add A10 CSI driver")
Cc: stable@vger.kernel.org
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
The v4l2_subdev_link_validate() function is a helper designed to
validate links whose sink is a subdev. When called on a link whose sink
is a video device, it only prints a warning and returns. As the
microchip-isc driver implements manual validate of the subdev to video
device link, we can just drop the v4l2_subdev_link_validate() to avoid
the warning.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Commit 6a6c8b362b ("usb, kobil: Sort out some bogus tty handling")
intended to fix and clean up the device-specific initial terminal
settings but instead confused the termios input and local control flags
and re-enabled ICRNL and IXON.
Drop the bogus masking of l-flags from the default i-flags (which has no
effect) and restore the original device-specific i-flags.
Fixes: 6a6c8b362b ("usb, kobil: Sort out some bogus tty handling")
Signed-off-by: Johan Hovold <johan@kernel.org>
Core in usb_serial_register_drivers() already sets the .owner, so driver
does not need to.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Modules registering drivers with usb_serial_register_drivers() might
forget to set .owner field. The field is used by some of other kernel
parts for reference counting (try_module_get()), so it is expected that
drivers will set it.
Solve the problem by moving this task away from the drivers to the core
USB serial code, just like we did for platform_driver in
commit 9447057eaf ("platform_device: use a macro instead of
platform_driver_register").
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
[ johan: amend commit summary ]
Signed-off-by: Johan Hovold <johan@kernel.org>
In some cases the sink can reset itself after it was configured into MST
mode, without the driver noticing the disconnected state. For instance
the reset may happen in the middle of a modeset, or the (long) HPD pulse
generated may be not long enough for the encoder detect handler to
observe the HPD's deasserted state. In this case the sink's DPCD
register programmed to enable MST will be reset, while the driver still
assumes MST is still enabled. Detect this condition, which will tear
down and recreate/re-enable the MST topology.
v2:
- Add a code comment about adjusting the expected DP_MSTM_CTRL register
value for SST + SideBand. (Suraj, Jani)
- Print a debug message about detecting the link reset. (Jani)
- Verify the DPCD MST state only if it wasn't already determined that
the sink is disconnected.
Cc: stable@vger.kernel.org
Cc: Jani Nikula <jani.nikula@intel.com>
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/11195
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> (v1)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240823162918.1211875-1-imre.deak@intel.com
Krzysztof reported an issue [0] which is caused by parallel attempts to
instantiate the same I2C client device. This can happen if driver
supports auto-detection, but certain devices are also instantiated
explicitly.
The original change isn't actually wrong, it just revealed that I2C core
isn't prepared yet to handle this scenario.
Calls to i2c_new_client_device() can be nested, therefore we can't use a
simple mutex here. Parallel instantiation of devices at different addresses
is ok, so we just have to prevent parallel instantiation at the same address.
We can use a bitmap with one bit per 7-bit I2C client address, and atomic
bit operations to set/check/clear bits.
Now a parallel attempt to instantiate a device at the same address will
result in -EBUSY being returned, avoiding the "sysfs: cannot create duplicate
filename" splash.
Note: This patch version includes small cosmetic changes to the Tested-by
version, only functional change is that address locking is supported
for slave addresses too.
[0] https://lore.kernel.org/linux-i2c/9479fe4e-eb0c-407e-84c0-bd60c15baf74@ans.pl/T/#m12706546e8e2414d8f1a0dc61c53393f731685cc
Fixes: caba40ec35 ("eeprom: at24: Probe for DDR3 thermal sensor in the SPD case")
Cc: stable@vger.kernel.org
Tested-by: Krzysztof Piotr Oledzki <ole@ans.pl>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
To test SMBusAlert handlers, let the testunit be able to trigger
SMBusAlert interrupts. This new command needs a GPIO connected to the
SMBAlert# line.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
To avoid forward declarations in upcoming code, move the workqueue
handler as-is downwards. This will ease review of the new features.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
The testunit can also be instantiated via firmware nodes. Give a
devicetree node as an example.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
The driver must ensure TX descriptor updates are visible
before updating TX pointer and TX clear pointer.
This resolves TX hangs observed on AST2600 when running
iperf3.
Signed-off-by: Jacky Chou <jacky_chou@aspeedtech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
kunit_driver_create() accepts a name for the driver, but does not copy
it, so if that name is either on the stack, or otherwise freed, we end
up with a use-after-free when the driver is cleaned up.
Instead, strdup() the name, and manage it as another KUnit allocation.
As there was no existing kunit_kstrdup(), we add one. Further, add a
kunit_ variant of strdup_const() and kfree_const(), so we don't need to
allocate and manage the string in the majority of cases where it's a
constant.
However, these are inline functions, and is_kernel_rodata() only works
for built-in code. This causes problems in two cases:
- If kunit is built as a module, __{start,end}_rodata is not defined.
- If a kunit test using these functions is built as a module, it will
suffer the same fate.
This fixes a KASAN splat with overflow.overflow_allocation_test, when
built as a module.
Restrict the is_kernel_rodata() case to when KUnit is built as a module,
which fixes the first case, at the cost of losing the optimisation.
Also, make kunit_{kstrdup,kfree}_const non-inline, so that other modules
using them will not accidentally depend on is_kernel_rodata(). If KUnit
is built-in, they'll benefit from the optimisation, if KUnit is not,
they won't, but the string will be properly duplicated.
Fixes: d03c720e03 ("kunit: Add APIs for managing devices")
Reported-by: Nico Pache <npache@redhat.com>
Closes: https://groups.google.com/g/kunit-dev/c/81V9b9QYON0
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Rae Moar <rmoar@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Tested-by: Rae Moar <rmoar@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Based on feedback from Linus[1] and follow-up discussions, change the
suggested file naming for KUnit tests.
Link: https://lore.kernel.org/lkml/CAHk-=wgim6pNiGTBMhP8Kd3tsB7_JTAuvNJ=XYd3wPvvk=OHog@mail.gmail.com/ [1]
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Kees Cook <kees@kernel.org>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
