- add the shutdown() callback to gpio-mlxbf3 in order to disable
interrupts during graceful reboot
-----BEGIN PGP SIGNATURE-----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=bu2I
-----END PGP SIGNATURE-----
Merge tag 'gpio-fixes-for-v6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fix from Bartosz Golaszewski:
- add the shutdown() callback to gpio-mlxbf3 in order to disable
interrupts during graceful reboot
* tag 'gpio-fixes-for-v6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: mlxbf3: Support shutdown() function
All small fixes, mostly for usual suspects, HD-audio and USB-audio
device-specific fixes / quirks. The Cirrus codec support took the
update of SPI header as well. Other than that, there is a regression
fix in the sanity check of ALSA timer code.
-----BEGIN PGP SIGNATURE-----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=/QfS
-----END PGP SIGNATURE-----
Merge tag 'sound-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"All small fixes, mostly for usual suspects, HD-audio and USB-audio
device-specific fixes / quirks. The Cirrus codec support took the
update of SPI header as well. Other than that, there is a regression
fix in the sanity check of ALSA timer code"
* tag 'sound-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/tas2781: Use correct endian conversion
ALSA: usb-audio: Support Yamaha P-125 quirk entry
ALSA: hda: cs35l41: Remove redundant call to hda_cs_dsp_control_remove()
ALSA: hda: cs35l56: Remove redundant call to hda_cs_dsp_control_remove()
ALSA: hda/tas2781: fix wrong calibrated data order
ALSA: usb-audio: Add delay quirk for VIVO USB-C-XE710 HEADSET
ALSA: hda/realtek: Add support for new HP G12 laptops
ALSA: hda/realtek: Fix noise from speakers on Lenovo IdeaPad 3 15IAU7
ALSA: timer: Relax start tick time check for slave timer elements
spi: Add empty versions of ACPI functions
The fastrpc driver uses the label to determine the domain ID and create
the device nodes. It should be "cdsp1" as this is the engine we use here.
Fixes: df54dcb34f ("arm64: dts: qcom: sa8775p: add ADSP, CDSP and GPDSP nodes")
Reported-by: Ekansh Gupta <quic_ekangupt@quicinc.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240816102345.16481-2-brgl@bgdev.pl
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
mediatek:
- fix cursor crash
amdgpu:
- Fix MES ring buffer overflow
- DCN 3.5 fix
- DCN 3.2.1 fix
- DP MST fix
- Cursor fixes
- JPEG fixes
- Context ops validation
- MES 12 fixes
- VCN 5.0 fix
- HDP fix
panel:
- dt bindings style fix
- orientation quirks
rockchip:
- inno-hdmi: fix infoframe upload
v3d:
- fix OOB access in v3d_csd_job_run()
xe:
- Validate user fence during creation
- Fix use after free when client stats are captured
- SRIOV fixes
- Runtime PM fixes
-----BEGIN PGP SIGNATURE-----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=Xs5O
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2024-08-16' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Weekly drm fixes, mostly amdgpu and xe. The larger amdgpu fix is for a
new IP block introduced in rc1, so should be fine. The xe fixes
contain some missed fixes from the end of the previous round along
with some fixes which required precursor changes, but otherwise
everything seems fine,
mediatek:
- fix cursor crash
amdgpu:
- Fix MES ring buffer overflow
- DCN 3.5 fix
- DCN 3.2.1 fix
- DP MST fix
- Cursor fixes
- JPEG fixes
- Context ops validation
- MES 12 fixes
- VCN 5.0 fix
- HDP fix
panel:
- dt bindings style fix
- orientation quirks
rockchip:
- inno-hdmi: fix infoframe upload
v3d:
- fix OOB access in v3d_csd_job_run()
xe:
- Validate user fence during creation
- Fix use after free when client stats are captured
- SRIOV fixes
- Runtime PM fixes"
* tag 'drm-fixes-2024-08-16' of https://gitlab.freedesktop.org/drm/kernel: (37 commits)
drm/xe: Hold a PM ref when GT TLB invalidations are inflight
drm/xe: Drop xe_gt_tlb_invalidation_wait
drm/xe: Add xe_gt_tlb_invalidation_fence_init helper
drm/xe/pf: Fix VF config validation on multi-GT platforms
drm/xe: Build PM into GuC CT layer
drm/xe/vf: Fix register value lookup
drm/xe: Fix use after free when client stats are captured
drm/xe: Take a ref to xe file when user creates a VM
drm/xe: Add ref counting for xe_file
drm/xe: Move part of xe_file cleanup to a helper
drm/xe: Validate user fence during creation
drm/rockchip: inno-hdmi: Fix infoframe upload
drm/amd/amdgpu: add HDP_SD support on gc 12.0.0/1
drm/amdgpu: Update kmd_fw_shared for VCN5
drm/amd/amdgpu: command submission parser for JPEG
drm/amdgpu/mes12: fix suspend issue
drm/amdgpu/mes12: sw/hw fini for unified mes
drm/amdgpu/mes12: configure two pipes hardware resources
drm/amdgpu/mes12: adjust mes12 sw/hw init for multiple pipes
drm/amdgpu/mes12: add mes pipe switch support
...
Compiling arch-x86_64.h with clang and binutils LD yields
duplicate label errors:
.../gcc-13.2.0-nolibc/x86_64-linux/bin/x86_64-linux-ld: error: LLVM gold plugin: <inline asm>:44:1: symbol '.Lbackward_copy' is already defined
.Lbackward_copy:leaq -1(%rdi, %rcx, 1), %rdi
Instead of a local symbol use a local label which can be defined
multiple times and therefore avoids the error.
Reviewed-by: Ammar Faizi <ammarfaizi2@gnuweeb.org>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20240812-nolibc-lto-v2-3-736af7bbefa8@weissschuh.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
During LTO the references from the compiler-generated prologue and
epilogues to the stack protector symbols are not visible and the symbols
are removed.
This will then lead to errors during linking.
As those symbols are already #ifdeffed-out if unused mark them as "used"
to prevent their removal.
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20240812-nolibc-lto-v2-2-736af7bbefa8@weissschuh.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
During LTO the reference from the asm startup code to the _start_c()
function is not visible and _start_c() is removed.
This will then lead to errors during linking.
As _start_c() is indeed always used, mark it as such.
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20240812-nolibc-lto-v2-1-736af7bbefa8@weissschuh.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acquire the mailbox handle during device probe and do not release handle
in stop/detach routine or error paths. This removes the redundant
requests for mbox handle later during rproc start/attach. This also
allows to defer remoteproc driver's probe if mailbox is not probed yet.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Acked-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240808074127.2688131-4-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Acquire the mailbox handle during device probe and do not release handle
in stop/detach routine or error paths. This removes the redundant
requests for mbox handle later during rproc start/attach. This also
allows to defer remoteproc driver's probe if mailbox is not probed yet.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Link: https://lore.kernel.org/r/20240808074127.2688131-3-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Use the device lifecycle managed allocation function. This helps prevent
mistakes like freeing out of order in cleanup functions and forgetting
to free on error paths.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240808074127.2688131-2-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The arm_smmu_domain_alloc() function returns error pointers on error. It
doesn't return NULL. Update the error checking to match.
Fixes: 52acd7d8a4 ("iommu/arm-smmu-v3: Add support for domain_alloc_user fn")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/9208cd0d-8105-40df-93e9-bdcdf0d55eec@stanley.mountain
Signed-off-by: Will Deacon <will@kernel.org>
arm_smmu_sva_remove_dev_pasid() has been removed since commit d38c28dbef
("iommu/arm-smmu-v3: Put the SVA mmu notifier in the smmu_domain"), remain
the empty definition untouched in header file, which is used when
CONFIG_ARM_SMMU_V3_SVA is not set. So, let's remove the unused definition.
Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240815111504.48810-1-zhangzekun11@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Previously this was dev_err_ratelimited() but it got changed to a
ratelimited dev_dbg(). Change it back to dev_err().
Fixes: d525b0af0c ("iommu/arm-smmu: Pretty-print context fault related regs")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Link: https://lore.kernel.org/r/20240809172716.10275-1-robdclark@gmail.com
Signed-off-by: Will Deacon <will@kernel.org>
Tegra I2C Controller: Addresses a potential double-locking issue
during probe. ACPI devices are not IRQ-safe when invoking runtime
suspend and resume functions, so the irq_safe flag should not be
set.
Qualcomm GENI I2C Controller: Fixes an oversight in the exit path
of the runtime_resume() function, which was missed in the
previous release.
-----BEGIN PGP SIGNATURE-----
iIwEABYIADQWIQScDfrjQa34uOld1VLaeAVmJtMtbgUCZr8N2RYcYW5kaS5zaHl0
aUBrZXJuZWwub3JnAAoJENp4BWYm0y1uRL4A/0kePjtTa2xs8tdkSBWhvOO3ZbL1
WyLcNsQ0F5JK7uS+AP42FnB0wVkIZe3LHATDZ6zKg0q8XfXw24budGeVqoWiAw==
=KWwA
-----END PGP SIGNATURE-----
Merge tag 'i2c-host-fixes-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current
Two fixes in this update:
Tegra I2C Controller: Addresses a potential double-locking issue
during probe. ACPI devices are not IRQ-safe when invoking runtime
suspend and resume functions, so the irq_safe flag should not be
set.
Qualcomm GENI I2C Controller: Fixes an oversight in the exit path
of the runtime_resume() function, which was missed in the
previous release.
Add device tree overlay for the WolfVision PF5 Visualizer display.
Since there shall be additional variants of the WolfVision PF5 display in
future, move common definitions to a device tree include file.
Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
Link: https://lore.kernel.org/r/20240412-feature-wolfvision-pf5-display-v1-1-f032f32dba1a@wolfvision.net
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The command provided to use ccache with clang is not a literal code
block. Once built, the documentation displays the '' symbols as a "
character, which is wrong, and the command can not be applied as
provided.
Turn the command into a literal code block.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Armv9.4/8.9 PMU adds optional support for a fixed instruction counter
similar to the fixed cycle counter. Support for the feature is indicated
in the ID_AA64DFR1_EL1 register PMICNTR field. The counter is not
accessible in AArch32.
Existing userspace using direct counter access won't know how to handle
the fixed instruction counter, so we have to avoid using the counter
when user access is requested.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Tested-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20240731-arm-pmu-3-9-icntr-v3-7-280a8d7ff465@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
There are 2 defines for the number of PMU counters:
ARMV8_PMU_MAX_COUNTERS and ARMPMU_MAX_HWEVENTS. Both are the same
currently, but Armv9.4/8.9 increases the number of possible counters
from 32 to 33. With this change, the maximum number of counters will
differ for KVM's PMU emulation which is PMUv3.4. Give KVM PMU emulation
its own define to decouple it from the rest of the kernel's number PMU
counters.
The VHE PMU code needs to match the PMU driver, so switch it to use
ARMPMU_MAX_HWEVENTS instead.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Tested-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20240731-arm-pmu-3-9-icntr-v3-6-280a8d7ff465@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
The PMUv3 and KVM code each have a define for the PMU cycle counter
index. Move KVM's define to a shared location and use it for PMUv3
driver.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Tested-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20240731-arm-pmu-3-9-icntr-v3-5-280a8d7ff465@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
ARMV8_PMU_COUNTER_MASK is really a mask for the PMSELR_EL0.SEL register
field. Make that clear by adding a standard sysreg definition for the
register, and using it instead.
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Tested-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20240731-arm-pmu-3-9-icntr-v3-4-280a8d7ff465@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Commit df29ddf4f0 ("arm64: perf: Abstract system register accesses
away") split off PMU register accessor functions to a standalone header.
Let's use it for KVM PMU code and get rid one copy of the ugly switch
macro.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Tested-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20240731-arm-pmu-3-9-icntr-v3-3-280a8d7ff465@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Various PMUv3 registers which are a mask of counters are 64-bit
registers, but the accessor functions take a u32. This has been fine as
the upper 32-bits have been RES0 as there has been a maximum of 32
counters prior to Armv9.4/8.9. With Armv9.4/8.9, a 33rd counter is
added. Update the accessor functions to use a u64 instead.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Tested-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20240731-arm-pmu-3-9-icntr-v3-2-280a8d7ff465@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Xscale and Armv6 PMUs defined the cycle counter at 0 and event counters
starting at 1 and had 1:1 event index to counter numbering. On Armv7 and
later, this changed the cycle counter to 31 and event counters start at
0. The drivers for Armv7 and PMUv3 kept the old event index numbering
and introduced an event index to counter conversion. The conversion uses
masking to convert from event index to a counter number. This operation
relies on having at most 32 counters so that the cycle counter index 0
can be transformed to counter number 31.
Armv9.4 adds support for an additional fixed function counter
(instructions) which increases possible counters to more than 32, and
the conversion won't work anymore as a simple subtract and mask. The
primary reason for the translation (other than history) seems to be to
have a contiguous mask of counters 0-N. Keeping that would result in
more complicated index to counter conversions. Instead, store a mask of
available counters rather than just number of events. That provides more
information in addition to the number of events.
No (intended) functional changes.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Tested-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20240731-arm-pmu-3-9-icntr-v3-1-280a8d7ff465@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Use of_property_present() to test for property presence rather than
of_find_property(). This is part of a larger effort to remove callers
of of_find_property() and similar functions. of_find_property() leaks
the DT struct property and data pointers which is a problem for
dynamically allocated nodes which may be freed.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20240731191312.1710417-15-robh@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
we seems to have ended up with duplicate clocks for frame-sync on sm8250,
it has both va and fsgen which are exactly same things. Remove the redundant
va clock and make it align with other SoCs.
Codec driver does not even handle va clock, so remove this from the
bindings and examples to avoid any confusion.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240815165320.18836-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
When ACP is not powered on by default, acp power on sequence explicitly
invoked by programming pgfsm control mask. The existing implementation
checks the same PGFSM status mask and programs the same PGFSM control mask
in all ACP variants which breaks acp power on sequence for ACP6.0 and
ACP6.3 variants. So to fix this issue, update ACP pgfsm control mask and
status mask based on acp descriptor rev field, which will vary based on
acp variant.
Fixes: 846aef1d7c ("ASoC: SOF: amd: Add Renoir ACP HW support")
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://patch.msgid.link/20240816070328.610360-1-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
During build testing, we found a error:
arch/powerpc/kvm/book3s_hv.c:4052:17: error: variable 'loops' set but not used
unsigned long loops = 0;
1 error generated.
Fix it by removing the unused variable.
Fixes: b4deba5c41 ("KVM: PPC: Book3S HV: Implement dynamic micro-threading on POWER8")
Signed-off-by: Alex Shi <alexs@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240816093313.327268-1-alexs@kernel.org
In 'rtw_coex_action_bt_a2dp_pan', 'wl_cpt_test' and 'bt_cpt_test' are
hardcoded to false, so corresponding 'table_case' and 'tdma_case'
assignments are never met.
Also 'rtw_coex_set_rf_para(rtwdev, chip->wl_rf_para_rx[1])' is never
executed. Assuming that CPT was never fully implemented, remove
lookalike leftovers. Compile tested only.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 76f631cb40 ("rtw88: coex: update the mechanism for A2DP + PAN")
Signed-off-by: Dmitry Kandybka <d.kandybka@gmail.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240809085310.10512-1-d.kandybka@gmail.com
Coverity reported that u8 rx_mask << 24 will become signed 32 bits, which
casting to unsigned 64 bits will do sign extension. For example,
putting 0x80000000 (signed 32 bits) to a u64 variable will become
0xFFFFFFFF_80000000.
The real case we meet is:
rx_mask[0...3] = ff ff 00 00
ra_mask = 0xffffffff_ff0ff000
After this fix:
rx_mask[0...3] = ff ff 00 00
ra_mask = 0x00000000_ff0ff000
Fortunately driver does bitwise-AND with incorrect ra_mask and supported
rates (1ss and 2ss rate only) afterward, so the final rate mask of
original code is still correct.
Addresses-Coverity-ID: 1504762 ("Unintended sign extension")
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240809072012.84152-5-pkshih@realtek.com
The handler of firmware C2H event RTW89_MAC_C2H_FUNC_READ_WOW_CAM isn't
implemented, but driver expects number of handlers is
NUM_OF_RTW89_MAC_C2H_FUNC_WOW causing out-of-bounds access. Fix it by
removing ID.
Addresses-Coverity-ID: 1598775 ("Out-of-bounds read")
Fixes: ff53fce5c7 ("wifi: rtw89: wow: update latest PTK GTK info to mac80211 after resume")
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240809072012.84152-4-pkshih@realtek.com
TX EVM will significantly decrease for long packets when
the TX idle time increases. Introduce digital compensation
based on TX idle time, to mitigate TX EVM degradation, and
TX throughput improved from 1871 to 1947 Mbps.
Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240809072012.84152-3-pkshih@realtek.com
Firmware from v1 will include fw_element so that the driver will loading
parameters of BB and RF, TX power related tables from firmware. For the
current flow, if fw_element is present, the driver will prioritize
loading parameters and tables from firmware; otherwise, it will
revert to the original loading method.
Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240809072012.84152-2-pkshih@realtek.com
After running once, the for_each_trip_desc() loop in
bang_bang_manage() is pure needless overhead because it is not going to
make any changes unless a new cooling device has been bound to one of
the trips in the thermal zone or the system is resuming from sleep.
For this reason, make bang_bang_manage() set governor_data for the
thermal zone and check it upfront to decide whether or not it needs to
do anything.
However, governor_data needs to be reset in some cases to let
bang_bang_manage() know that it should walk the trips again, so add an
.update_tz() callback to the governor and make the core additionally
invoke it during system resume.
To avoid affecting the other users of that callback unnecessarily, add
a special notification reason for system resume, THERMAL_TZ_RESUME, and
also pass it to __thermal_zone_device_update() called during system
resume for consistency.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Peter Kästle <peter@piie.net>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Cc: 6.10+ <stable@vger.kernel.org> # 6.10+
Link: https://patch.msgid.link/2285575.iZASKD2KPV@rjwysocki.net
After recent changes, the Bang-bang governor may not adjust the
initial configuration of cooling devices to the actual situation.
Namely, if a cooling device bound to a certain trip point starts in
the "on" state and the thermal zone temperature is below the threshold
of that trip point, the trip point may never be crossed on the way up
in which case the state of the cooling device will never be adjusted
because the thermal core will never invoke the governor's
.trip_crossed() callback. [Note that there is no issue if the zone
temperature is at the trip threshold or above it to start with because
.trip_crossed() will be invoked then to indicate the start of thermal
mitigation for the given trip.]
To address this, add a .manage() callback to the Bang-bang governor
and use it to ensure that all of the thermal instances managed by the
governor have been initialized properly and the states of all of the
cooling devices involved have been adjusted to the current zone
temperature as appropriate.
Fixes: 530c932bdf ("thermal: gov_bang_bang: Use .trip_crossed() instead of .throttle()")
Link: https://lore.kernel.org/linux-pm/1bfbbae5-42b0-4c7d-9544-e98855715294@piie.net/
Cc: 6.10+ <stable@vger.kernel.org> # 6.10+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Peter Kästle <peter@piie.net>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Link: https://patch.msgid.link/8419356.T7Z3S40VBb@rjwysocki.net
Move the setting of the thermal instance target state from
bang_bang_control() into a separate function that will be also called
in a different place going forward.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Peter Kästle <peter@piie.net>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Cc: 6.10+ <stable@vger.kernel.org> # 6.10+
Link: https://patch.msgid.link/3313587.aeNJFYEL58@rjwysocki.net
Instead of clearing the "updated" flag for each cooling device
affected by the trip point crossing in bang_bang_control() and
walking all thermal instances to run thermal_cdev_update() for all
of the affected cooling devices, call __thermal_cdev_update()
directly for each of them.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Peter Kästle <peter@piie.net>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Cc: 6.10+ <stable@vger.kernel.org> # 6.10+
Link: https://patch.msgid.link/13583081.uLZWGnKmhe@rjwysocki.net
IORT(Input Output Remapping Table) represents the I/O topology of an
Arm-based system for use with the ACPI, so acpi_iort.h is for arm64
only.
This helps git-send-email to figure out the proper maintainers when
touching the file.
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20240808130946.1028376-1-guohanjun@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
A minor anti-pattern has established itself in __init_el2_fgt,
where each block of instructions is skipped by jumping to a label
named for the next (typically unrelated) block.
This makes diffs more noisy than necessary, since appending each
new block to deal with some new architecture feature now requires
altering a branch destination in the existing code.
Fix it by naming the affected labels based on the block that is
skipping itself instead, as is done elsewhere in the el2_setup code.
No functional change.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Link: https://lore.kernel.org/r/20240729162542.367059-1-Dave.Martin@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
A few SME-related sigcontext UAPI macros leave an argument
unprotected from misparsing during macro expansion.
Add parentheses around references to macro arguments where
appropriate.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Fixes: ee072cf708 ("arm64/sme: Implement signal handling for ZT")
Fixes: 39782210eb ("arm64/sme: Implement ZA signal handling")
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240729152005.289844-1-Dave.Martin@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Earlier TCR_SMP_FLAGS gets conditionally set as TCR_SHARED with CONFIG_SMP.
Currently CONFIG_SMP is always enabled on arm64 platforms, hence drop this
indirection via TCR_SMP_FLAGS and instead always directly use TCR_SHARED.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Link: https://lore.kernel.org/r/20240724041428.573748-1-anshuman.khandual@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
This just drops off the macro PMD_SECT_VALID which remains unused. Because
macro PMD_TYPE_SECT with same value (_AT(pmdval_t, 1) << 0), gets used for
creating or updating given block mappings.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Link: https://lore.kernel.org/r/20240724044712.602210-1-anshuman.khandual@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Syzbot points out that skb_trim() has a sanity check on the existing length of
the skb, which can be uninitialised in some error paths. The intent here is
clearly just to reset the length to zero before resubmitting, so switch to
calling __skb_set_length(skb, 0) directly. In addition, __skb_set_length()
already contains a call to skb_reset_tail_pointer(), so remove the redundant
call.
The syzbot report came from ath9k_hif_usb_reg_in_cb(), but there's a similar
usage of skb_trim() in ath9k_hif_usb_rx_cb(), change both while we're at it.
Reported-by: syzbot+98afa303be379af6cdb2@syzkaller.appspotmail.com
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20240812142447.12328-1-toke@toke.dk
With host_mlme support being added mwifiex_cfg80211_ops is no longer
constant, but supplemented with the host_mlme related ops when host_mlme
support is enabled. This doesn't work with multiple adapters when only
few of then have host_mlme support. Duplicate mwifiex_cfg80211_ops
before using it and keep the original constant.
While at it mark mwifiex_cfg80211_ops const to prevent people from
changing it again during runtime.
Fixes: 36995892c2 ("wifi: mwifiex: add host mlme for client mode")
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Acked-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240809-mwifiex-duplicate-mwifiex_cfg80211_ops-v1-1-23e0e6290ace@pengutronix.de
mwifiex_band_2ghz and mwifiex_band_5ghz are statically allocated, but
used and modified in driver instances. Duplicate them before using
them in driver instances so that different driver instances do not
influence each other.
This was observed on a board which has one PCIe and one SDIO mwifiex
adapter. It blew up in mwifiex_setup_ht_caps(). This was called with
the statically allocated struct which is modified in this function.
Cc: stable@vger.kernel.org
Fixes: d6bffe8bb5 ("mwifiex: support for creation of AP interface")
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Acked-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240809-mwifiex-duplicate-static-structs-v1-1-6837b903b1a4@pengutronix.de
