Obtain the device node reference with scoped/cleanup.h and use scoped
for_each_child_of_node_scoped() to reduce error handling and make the
code a bit simpler. Add also brackets {} over outer for loop for code
readability.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240814-cleanup-h-of-node-put-regulator-v1-2-87151088b883@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
soc-pcm.c has snd_soc_dpcm_stream_{lock/unlock}_irq() helper function,
but it is almost nothing help. It just makes a code complex.
Let's remove it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/875xsnll85.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Replace SET_RUNTIME_PM_OPS()/SET SYSTEM_SLEEP_PM_OPS() with their modern
RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() alternatives.
The combined usage of pm_ptr() and RUNTIME_PM_OPS/SYSTEM_SLEEP_PM_OPS()
allows the compiler to evaluate if the runtime suspend/resume() functions
are used at build time or are simply dead code.
This allows removing the CONFIG_PM ifdefery from the runtime
suspend/resume() functions.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Link: https://patch.msgid.link/20240808184944.267686-7-festevam@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Replace SET_SYSTEM_SLEEP_PM_OPS() with its modern SYSTEM_SLEEP_PM_OPS()
alternative.
The combined usage of pm_sleep_ptr() and SYSTEM_SLEEP_PM_OPS() allows
the compiler to evaluate if the suspend/resume() functions
are used at build time or are simply dead code.
This allows removing the CONFIG_PM_SLEEP ifdefery from the
suspend/resume() functions.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Link: https://patch.msgid.link/20240808184944.267686-6-festevam@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Replace SET_SYSTEM_SLEEP_PM_OPS() with its modern SYSTEM_SLEEP_PM_OPS()
alternative.
The combined usage of pm_sleep_ptr() and SYSTEM_SLEEP_PM_OPS() allows
the compiler to evaluate if the suspend/resume() functions are used at
build time or are simply dead code.
This allows removing the CONFIG_PM_SLEEP ifdefery from the
suspend/resume() functions.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Link: https://patch.msgid.link/20240808184944.267686-5-festevam@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Replace SET_RUNTIME_PM_OPS()/SET SYSTEM_SLEEP_PM_OPS() with their modern
RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() alternatives.
The combined usage of pm_ptr() and RUNTIME_PM_OPS/SYSTEM_SLEEP_PM_OPS()
allows the compiler to evaluate if the runtime suspend/resume() functions
are used at build time or are simply dead code.
This allows removing the CONFIG_PM ifdefery from the runtime
suspend/resume() functions.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Link: https://patch.msgid.link/20240808184944.267686-4-festevam@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Replace SET_RUNTIME_PM_OPS() with its modern RUNTIME_PM_OPS()
alternative.
The combined usage of pm_ptr() and RUNTIME_PM_OPS() allows the
compiler to evaluate if the runtime suspend/resume() functions
are used at build time or are simply dead code.
This allows removing the CONFIG_PM ifdefery from the runtime
suspend/resume() functions.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Link: https://patch.msgid.link/20240808184944.267686-3-festevam@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Replace SET_RUNTIME_PM_OPS()/SET SYSTEM_SLEEP_PM_OPS() with their modern
RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() alternatives.
The combined usage of pm_ptr() and RUNTIME_PM_OPS/SYSTEM_SLEEP_PM_OPS()
allows the compiler to evaluate if the runtime suspend/resume() functions
are used at build time or are simply dead code.
This allows removing the CONFIG_PM ifdefery from the runtime
suspend/resume() functions.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Link: https://patch.msgid.link/20240808184944.267686-2-festevam@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Replace SET_RUNTIME_PM_OPS()/SET SYSTEM_SLEEP_PM_OPS() with their modern
RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() alternatives.
The combined usage of pm_ptr() and RUNTIME_PM_OPS/SYSTEM_SLEEP_PM_OPS()
allows the compiler to evaluate if the runtime suspend/resume() functions
are used at build time or are simply dead code.
This allows removing the CONFIG_PM ifdefery from the runtime
suspend/resume() functions.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Link: https://patch.msgid.link/20240808184944.267686-1-festevam@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The device never comes online from a reset/shutdown state, because the
driver de-asserts reset GPIO when requesting it but then, at the end of
probe() through wcd937x_reset(), leaves it asserted.
Cc: stable@vger.kernel.org
Fixes: 9be3ec196d ("ASoC: codecs: wcd937x: add wcd937x codec driver")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240806114913.40022-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
"INVALID" is misspelt in "SEV_RET_INAVLID_CONFIG". Since this is part of
the UAPI, keep the current definition and add a new one with the fix.
Fix-suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Amit Shah <amit.shah@amd.com>
Message-ID: <20240814083113.21622-1-amit@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In load_elf_binary as part of the execve(), when the current
task’s personality has MMAP_PAGE_ZERO set, the kernel allocates
one page at address 0. According to the comment:
/* Why this, you ask??? Well SVr4 maps page 0 as read-only,
and some applications "depend" upon this behavior.
Since we do not have the power to recompile these, we
emulate the SVr4 behavior. Sigh. */
At one point, Linus suggested removing this [1].
Code search in debian didn't see much use of MMAP_PAGE_ZERO [2],
it exists in util and test (rr).
Sealing this is probably safe, the comment doesn't say
the app ever wanting to change the mapping to rwx. Sealing
also ensures that never happens.
If there is a complaint, we can make this configurable.
Link: https://lore.kernel.org/lkml/CAHk-=whVa=nm_GW=NVfPHqcxDbWt4JjjK1YWb0cLjO4ZSGyiDA@mail.gmail.com/ [1]
Link: https://codesearch.debian.net/search?q=MMAP_PAGE_ZERO&literal=1&perpkg=1&page=1 [2]
Signed-off-by: Jeff Xu <jeffxu@chromium.org>
Link: https://lore.kernel.org/r/20240806214931.2198172-2-jeffxu@google.com
Signed-off-by: Kees Cook <kees@kernel.org>
Currently, only acpi_early_node_map[0] was initialized to NUMA_NO_NODE.
To ensure all the values were properly initialized, switch to initialize
all of them to NUMA_NO_NODE.
Fixes: e189624916 ("arm64: numa: rework ACPI NUMA initialization")
Cc: <stable@vger.kernel.org> # 4.19.x
Reported-by: Andrew Jones <ajones@ventanamicro.com>
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Link: https://lore.kernel.org/r/853d7f74aa243f6f5999e203246f0d1ae92d2b61.1722828421.git.haibo1.xu@intel.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
In the CONFIG_CC_HAS_ASM_GOTO_OUTPUT=y version of __get_mem_asm(), we
incorrectly use _ASM_EXTABLE_##type##ACCESS_ERR() such that upon a fault
the extable fixup handler writes -EFAULT into "%w0", which is the
register containing 'x' (the result of the load).
This was a thinko in commit:
86a6a68feb ("arm64: start using 'asm goto' for get_user() when available")
Prior to that commit _ASM_EXTABLE_##type##ACCESS_ERR_ZERO() was used
such that the extable fixup handler wrote -EFAULT into "%w0" (the
register containing 'err'), and zero into "%w1" (the register containing
'x'). When the 'err' variable was removed, the extable entry was updated
incorrectly.
Writing -EFAULT to the value register is unnecessary but benign:
* We never want -EFAULT in the value register, and previously this would
have been zeroed in the extable fixup handler.
* In __get_user_error() the value is overwritten with zero explicitly in
the error path.
* The asm goto outputs cannot be used when the goto label is taken, as
older compilers (e.g. clang < 16.0.0) do not guarantee that asm goto
outputs are usable in this path and may use a stale value rather than
the value in an output register. Consequently, zeroing in the extable
fixup handler is insufficient to ensure callers see zero in the error
path.
* The expected usage of unsafe_get_user() and get_kernel_nofault()
requires that the value is not consumed in the error path.
Some versions of GCC would mis-compile asm goto with outputs, and
erroneously omit subsequent assignments, breaking the error path
handling in __get_user_error(). This was discussed at:
https://lore.kernel.org/lkml/ZpfxLrJAOF2YNqCk@J2N7QTR9R3.cambridge.arm.com/
... and was fixed by removing support for asm goto with outputs on those
broken compilers in commit:
f2f6a8e887 ("init/Kconfig: remove CONFIG_GCC_ASM_GOTO_OUTPUT_WORKAROUND")
With that out of the way, we can safely replace the usage of
_ASM_EXTABLE_##type##ACCESS_ERR() with _ASM_EXTABLE_##type##ACCESS(),
leaving the value register unchanged in the case a fault is taken, as
was originally intended. This matches other architectures and matches
our __put_mem_asm().
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240807103731.2498893-1-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Add a new user option to memslot_perf_test to allow testing memslot move
with quirk KVM_X86_QUIRK_SLOT_ZAP_ALL disabled.
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Message-ID: <20240703021219.13939-1-yan.y.zhao@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a new user option to memslot_modification_stress_test to allow testing
with slot zap quirk KVM_X86_QUIRK_SLOT_ZAP_ALL disabled.
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Message-ID: <20240703021206.13923-1-yan.y.zhao@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Update set_memory_region_test to make sure memslot move and deletion
function correctly both when slot zap quirk KVM_X86_QUIRK_SLOT_ZAP_ALL is
enabled and disabled.
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Message-ID: <20240703021119.13904-1-yan.y.zhao@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce the quirk KVM_X86_QUIRK_SLOT_ZAP_ALL to allow users to select
KVM's behavior when a memslot is moved or deleted for KVM_X86_DEFAULT_VM
VMs. Make sure KVM behave as if the quirk is always disabled for
non-KVM_X86_DEFAULT_VM VMs.
The KVM_X86_QUIRK_SLOT_ZAP_ALL quirk offers two behavior options:
- when enabled: Invalidate/zap all SPTEs ("zap-all"),
- when disabled: Precisely zap only the leaf SPTEs within the range of the
moving/deleting memory slot ("zap-slot-leafs-only").
"zap-all" is today's KVM behavior to work around a bug [1] where the
changing the zapping behavior of memslot move/deletion would cause VM
instability for VMs with an Nvidia GPU assigned; while
"zap-slot-leafs-only" allows for more precise zapping of SPTEs within the
memory slot range, improving performance in certain scenarios [2], and
meeting the functional requirements for TDX.
Previous attempts to select "zap-slot-leafs-only" include a per-VM
capability approach [3] (which was not preferred because the root cause of
the bug remained unidentified) and a per-memslot flag approach [4]. Sean
and Paolo finally recommended the implementation of this quirk and
explained that it's the least bad option [5].
By default, the quirk is enabled on KVM_X86_DEFAULT_VM VMs to use
"zap-all". Users have the option to disable the quirk to select
"zap-slot-leafs-only" for specific KVM_X86_DEFAULT_VM VMs that are
unaffected by this bug.
For non-KVM_X86_DEFAULT_VM VMs, the "zap-slot-leafs-only" behavior is
always selected without user's opt-in, regardless of if the user opts for
"zap-all".
This is because it is assumed until proven otherwise that non-
KVM_X86_DEFAULT_VM VMs will not be exposed to the bug [1], and most
importantly, it's because TDX must have "zap-slot-leafs-only" always
selected. In TDX's case a memslot's GPA range can be a mixture of "private"
or "shared" memory. Shared is roughly analogous to how EPT is handled for
normal VMs, but private GPAs need lots of special treatment:
1) "zap-all" would require to zap private root page or non-leaf entries or
at least leaf-entries beyond the deleting memslot scope. However, TDX
demands that the root page of the private page table remains unchanged,
with leaf entries being zapped before non-leaf entries, and any dropped
private guest pages must be re-accepted by the guest.
2) if "zap-all" zaps only shared page tables, it would result in private
pages still being mapped when the memslot is gone. This may affect even
other processes if later the gmem fd was whole punched, causing the
pages being freed on the host while still mapped in the TD, because
there's no pgoff to the gfn information to zap the private page table
after memslot is gone.
So, simply go "zap-slot-leafs-only" as if the quirk is always disabled for
non-KVM_X86_DEFAULT_VM VMs to avoid manual opt-in for every VM type [6] or
complicating quirk disabling interface (current quirk disabling interface
is limited, no way to query quirks, or force them to be disabled).
Add a new function kvm_mmu_zap_memslot_leafs() to implement
"zap-slot-leafs-only". This function does not call kvm_unmap_gfn_range(),
bypassing special handling to APIC_ACCESS_PAGE_PRIVATE_MEMSLOT, as
1) The APIC_ACCESS_PAGE_PRIVATE_MEMSLOT cannot be created by users, nor can
it be moved. It is only deleted by KVM when APICv is permanently
inhibited.
2) kvm_vcpu_reload_apic_access_page() effectively does nothing when
APIC_ACCESS_PAGE_PRIVATE_MEMSLOT is deleted.
3) Avoid making all cpus request of KVM_REQ_APIC_PAGE_RELOAD can save on
costly IPIs.
Suggested-by: Kai Huang <kai.huang@intel.com>
Suggested-by: Sean Christopherson <seanjc@google.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Link: https://patchwork.kernel.org/project/kvm/patch/20190205210137.1377-11-sean.j.christopherson@intel.com [1]
Link: https://patchwork.kernel.org/project/kvm/patch/20190205210137.1377-11-sean.j.christopherson@intel.com/#25054908 [2]
Link: https://lore.kernel.org/kvm/20200713190649.GE29725@linux.intel.com/T/#mabc0119583dacf621025e9d873c85f4fbaa66d5c [3]
Link: https://lore.kernel.org/all/20240515005952.3410568-3-rick.p.edgecombe@intel.com [4]
Link: https://lore.kernel.org/all/7df9032d-83e4-46a1-ab29-6c7973a2ab0b@redhat.com [5]
Link: https://lore.kernel.org/all/ZnGa550k46ow2N3L@google.com [6]
Co-developed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Message-ID: <20240703021043.13881-1-yan.y.zhao@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Disallow read-only memslots for SEV-{ES,SNP} VM types, as KVM can't
directly emulate instructions for ES/SNP, and instead the guest must
explicitly request emulation. Unless the guest explicitly requests
emulation without accessing memory, ES/SNP relies on KVM creating an MMIO
SPTE, with the subsequent #NPF being reflected into the guest as a #VC.
But for read-only memslots, KVM deliberately doesn't create MMIO SPTEs,
because except for ES/SNP, doing so requires setting reserved bits in the
SPTE, i.e. the SPTE can't be readable while also generating a #VC on
writes. Because KVM never creates MMIO SPTEs and jumps directly to
emulation, the guest never gets a #VC. And since KVM simply resumes the
guest if ES/SNP guests trigger emulation, KVM effectively puts the vCPU
into an infinite #NPF loop if the vCPU attempts to write read-only memory.
Disallow read-only memory for all VMs with protected state, i.e. for
upcoming TDX VMs as well as ES/SNP VMs. For TDX, it's actually possible
to support read-only memory, as TDX uses EPT Violation #VE to reflect the
fault into the guest, e.g. KVM could configure read-only SPTEs with RX
protections and SUPPRESS_VE=0. But there is no strong use case for
supporting read-only memslots on TDX, e.g. the main historical usage is
to emulate option ROMs, but TDX disallows executing from shared memory.
And if someone comes along with a legitimate, strong use case, the
restriction can always be lifted for TDX.
Don't bother trying to retroactively apply the restriction to SEV-ES
VMs that are created as type KVM_X86_DEFAULT_VM. Read-only memslots can't
possibly work for SEV-ES, i.e. disallowing such memslots is really just
means reporting an error to userspace instead of silently hanging vCPUs.
Trying to deal with the ordering between KVM_SEV_INIT and memslot creation
isn't worth the marginal benefit it would provide userspace.
Fixes: 26c44aa9e0 ("KVM: SEV: define VM types for SEV and SEV-ES")
Fixes: 1dfe571c12 ("KVM: SEV: Add initial SEV-SNP support")
Cc: Peter Gonda <pgonda@google.com>
Cc: Michael Roth <michael.roth@amd.com>
Cc: Vishal Annapurve <vannapurve@google.com>
Cc: Ackerly Tng <ackerleytng@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20240809190319.1710470-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-----BEGIN PGP SIGNATURE-----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=B712
-----END PGP SIGNATURE-----
Merge tag 'selinux-pr-20240814' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux fixes from Paul Moore:
- Fix a xperms counting problem where we adding to the xperms count
even if we failed to add the xperm.
- Propogate errors from avc_add_xperms_decision() back to the caller so
that we can trigger the proper cleanup and error handling.
- Revert our use of vma_is_initial_heap() in favor of our older logic
as vma_is_initial_heap() doesn't correctly handle the no-heap case
and it is causing issues with the SELinux process/execheap access
control. While the older SELinux logic may not be perfect, it
restores the expected user visible behavior.
Hopefully we will be able to resolve the problem with the
vma_is_initial_heap() macro with the mm folks, but we need to fix
this in the meantime.
* tag 'selinux-pr-20240814' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: revert our use of vma_is_initial_heap()
selinux: add the processing of the failure of avc_add_xperms_decision()
selinux: fix potential counting error in avc_add_xperms_decision()
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZrym4AAKCRCRxhvAZXjc
oqT3AP9ydoUNavaZcRayH8r3ybvz9+aJGJ6Q7NznFVCk71vn0gD/buLzmq96Muns
M5DWHbft2AFwK0Rz2nx8j5OXUeHwrQg=
=HZBL
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.11-rc4.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
"VFS:
- Fix the name of file lease slab cache. When file leases were split
out of file locks the name of the file lock slab cache was used for
the file leases slab cache as well.
- Fix a type in take_fd() helper.
- Fix infinite directory iteration for stable offsets in tmpfs.
- When the icache is pruned all reclaimable inodes are marked with
I_FREEING and other processes that try to lookup such inodes will
block.
But some filesystems like ext4 can trigger lookups in their inode
evict callback causing deadlocks. Ext4 does such lookups if the
ea_inode feature is used whereby a separate inode may be used to
store xattrs.
Introduce I_LRU_ISOLATING which pins the inode while its pages are
reclaimed. This avoids inode deletion during inode_lru_isolate()
avoiding the deadlock and evict is made to wait until
I_LRU_ISOLATING is done.
netfs:
- Fault in smaller chunks for non-large folio mappings for
filesystems that haven't been converted to large folios yet.
- Fix the CONFIG_NETFS_DEBUG config option. The config option was
renamed a short while ago and that introduced two minor issues.
First, it depended on CONFIG_NETFS whereas it wants to depend on
CONFIG_NETFS_SUPPORT. The former doesn't exist, while the latter
does. Second, the documentation for the config option wasn't fixed
up.
- Revert the removal of the PG_private_2 writeback flag as ceph is
using it and fix how that flag is handled in netfs.
- Fix DIO reads on 9p. A program watching a file on a 9p mount
wouldn't see any changes in the size of the file being exported by
the server if the file was changed directly in the source
filesystem. Fix this by attempting to read the full size specified
when a DIO read is requested.
- Fix a NULL pointer dereference bug due to a data race where a
cachefiles cookies was retired even though it was still in use.
Check the cookie's n_accesses counter before discarding it.
nsfs:
- Fix ioctl declaration for NS_GET_MNTNS_ID from _IO() to _IOR() as
the kernel is writing to userspace.
pidfs:
- Prevent the creation of pidfds for kthreads until we have a
use-case for it and we know the semantics we want. It also confuses
userspace why they can get pidfds for kthreads.
squashfs:
- Fix an unitialized value bug reported by KMSAN caused by a
corrupted symbolic link size read from disk. Check that the
symbolic link size is not larger than expected"
* tag 'vfs-6.11-rc4.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
Squashfs: sanity check symbolic link size
9p: Fix DIO read through netfs
vfs: Don't evict inode under the inode lru traversing context
netfs: Fix handling of USE_PGPRIV2 and WRITE_TO_CACHE flags
netfs, ceph: Revert "netfs: Remove deprecated use of PG_private_2 as a second writeback flag"
file: fix typo in take_fd() comment
pidfd: prevent creation of pidfds for kthreads
netfs: clean up after renaming FSCACHE_DEBUG config
libfs: fix infinite directory reads for offset dir
nsfs: fix ioctl declaration
fs/netfs/fscache_cookie: add missing "n_accesses" check
filelock: fix name of file_lease slab cache
netfs: Fault in smaller chunks for non-large folio mappings
There is a confusing pattern in the kernel to use a variable named
'timeout' to store the result of wait_for_completion_timeout() causing
patterns like:
timeout = wait_for_completion_timeout(...)
if (!timeout) return -ETIMEDOUT;
with all kinds of permutations. Use 'time_left' as a variable to make the
code self explaining.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20240729104319.2658-2-wsa+renesas@sang-engineering.com
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
-----BEGIN PGP SIGNATURE-----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=sGTX
-----END PGP SIGNATURE-----
Merge tag 'bpf-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Pull bpf fixes from Alexei Starovoitov:
- Fix bpftrace regression from Kyle Huey.
Tracing bpf prog was called with perf_event input arguments causing
bpftrace produce garbage output.
- Fix verifier crash in stacksafe() from Yonghong Song.
Daniel Hodges reported verifier crash when playing with sched-ext.
The stack depth in the known verifier state was larger than stack
depth in being explored state causing out-of-bounds access.
- Fix update of freplace prog in prog_array from Leon Hwang.
freplace prog type wasn't recognized correctly.
* tag 'bpf-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
perf/bpf: Don't call bpf_overflow_handler() for tracing events
selftests/bpf: Add a test to verify previous stacksafe() fix
bpf: Fix a kernel verifier crash in stacksafe()
bpf: Fix updating attached freplace prog in prog_array map
There is a confusing pattern in the kernel to use a variable named
'timeout' to store the result of
wait_for_completion_interruptible_timeout() causing patterns like:
timeout = wait_for_completion_interruptible_timeout(...)
if (!timeout) return -ETIMEDOUT;
with all kinds of permutations. Use 'time_left' as a variable to make the
code self explaining.
Fix to the proper variable type 'long' while here.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20240729104319.2658-1-wsa+renesas@sang-engineering.com
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
Subtest for system-wide record with '--threads=cpu' option fails due
to a limit of open file descriptors on systems with 128 or more CPUs
as the default limit is set to 1024.
The number of open file descriptors should be slightly above
nmb_events*nmb_cpus + nmb_cpus(for perf.data.n) + 4*nmb_cpus(for pipes),
which equals 8*nmb_cpus. Therefore, temporarily raise the limit to
16*nmb_cpus for the test.
Committer notes:
Instead of disabling ShellCheck warnings all the uses of 'uname -n',
i.e. those:
In tests/shell/record.sh line 35:
default_fd_limit=$(ulimit -Sn)
^-^ SC3045 (warning): In POSIX sh, ulimit -S is undefined.
We can just switch from using '/bin/sh' to '/bin/bash' for this test, as
bash _has_ 'ulimit -n', so ShellCheck will not emit that warning.
There are dozens of 'perf test' shell tests that do just that,
'/bin/bash' is a reasonable expectation for those tests.
Signed-off-by: Veronika Molnarova <vmolnaro@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Radostin Stoyanov <rstoyano@redhat.com>
Link: https://lore.kernel.org/linux-perf-users/20240429085721.10122-1-vmolnaro@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use deferred actions to simplify the test suite and avoid potential memory
leaks when test cases fail. Remove unnecessary calls to
kunit_device_unregister() since kunit devices are tied to the test context
and released by a deferred action when the test is completed.
Other changes: fix a typo by changing the test suite name to fpga_region in
the kunit_suite struct.
Signed-off-by: Marco Pagani <marpagan@redhat.com>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20240725125031.308195-4-marpagan@redhat.com
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
Use deferred actions to simplify the test suite and avoid potential memory
leaks when test cases fail. Remove unnecessary calls to
kunit_device_unregister() since kunit devices are tied to the test context
and released by a deferred action when the test is completed.
Signed-off-by: Marco Pagani <marpagan@redhat.com>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20240725125031.308195-3-marpagan@redhat.com
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
If a file has the S_DAX flag (aka fsdax access mode) set, we cannot
allow users to change the realtime flag unless the datadev and rtdev
both support fsdax access modes. Even if there are no extents allocated
to the file, the setattr thread could be racing with another thread
that has already started down the write code paths.
Fixes: ba23cba9b3 ("fs: allow per-device dax status checking for filesystems")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Use deferred actions to simplify the test suite and avoid potential memory
leaks when test cases fail. Remove unnecessary calls to
kunit_device_unregister() since kunit devices are tied to the test context
and released by a deferred action when the test is completed.
Signed-off-by: Marco Pagani <marpagan@redhat.com>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20240725125031.308195-2-marpagan@redhat.com
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
In commit 9adf40249e, we changed the behavior of the AIL thread to
set its own task state to KILLABLE whenever the timeout value is
nonzero. Unfortunately, this missed the fact that xfsaild_push will
return 50ms (aka a longish sleep) when we reach the push target or the
AIL becomes empty, so xfsaild goes to sleep for a long period of time in
uninterruptible D state.
This results in artificially high load averages because KILLABLE
processes are UNINTERRUPTIBLE, which contributes to load average even
though the AIL is asleep waiting for someone to interrupt it. It's not
blocked on IOs or anything, but people scrap ps for processes that look
like they're stuck in D state, so restore the previous threshold.
Fixes: 9adf40249e ("xfs: AIL doesn't need manual pushing")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
It turns out that I misunderstood the difference between the attr and
attr2 feature bits. "attr" means that at some point an attr fork was
created somewhere in the filesystem. "attr2" means that inodes have
variable-sized forks, but says nothing about whether or not there
actually /are/ attr forks in the system.
If we have an attr fork, we only need to check that attr is set.
Fixes: 99d9d8d05d ("xfs: scrub inode block mappings")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
-----BEGIN PGP SIGNATURE-----
iJgEABYKAEAWIQTAnvhxs4J7QT+XHKnMPy2AAyfeZAUCZry1ZyIcbGF1cmVudC5w
aW5jaGFydEBpZGVhc29uYm9hcmQuY29tAAoJEMw/LYADJ95kkTQBAKZm34xgUyqh
NjrFd4QEARsXbsH+6kZrh40prVzws97eAQDUM+OVykg6+mmuVOZITdX6+KRLxv5e
bo+X5a+yYOW0BQ==
=X2AX
-----END PGP SIGNATURE-----
Merge tag 'next-media-rkisp1-20240814' of git://git.kernel.org/pub/scm/linux/kernel/git/pinchartl/linux.git
Extensible parameters support for the rkisp1 driver.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The data conversion is done rather by a wrong function. We convert to
BE32, not from BE32. Although the end result must be same, this was
complained by the compiler.
Fix the code again and align with another similar function
tas2563_apply_calib() that does already right.
Fixes: 3beddef84d ("ALSA: hda/tas2781: fix wrong calibrated data order")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202408141630.DiDUB8Z4-lkp@intel.com/
Link: https://patch.msgid.link/20240814100500.1944-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Apply the newly introduced macros for reduce the complex expressions
and cast in the quirk table definitions. It results in a significant
code reduction, too.
There should be no functional changes.
Link: https://patch.msgid.link/20240814134844.2726-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Many entries in the USB-audio quirk tables have relatively complex
expressions. For improving the readability, introduce a few macros.
Those are applied in the following patch.
Link: https://patch.msgid.link/20240814134844.2726-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This reverts commit 28ab976911.
Sense data can be in either fixed format or descriptor format.
SAT-6 revision 1, "10.4.6 Control mode page", defines the D_SENSE bit:
"The SATL shall support this bit as defined in SPC-5 with the following
exception: if the D_ SENSE bit is set to zero (i.e., fixed format sense
data), then the SATL should return fixed format sense data for ATA
PASS-THROUGH commands."
The libata SATL has always kept D_SENSE set to zero by default. (It is
however possible to change the value using a MODE SELECT SG_IO command.)
Failed ATA PASS-THROUGH commands correctly respected the D_SENSE bit,
however, successful ATA PASS-THROUGH commands incorrectly returned the
sense data in descriptor format (regardless of the D_SENSE bit).
Commit 28ab976911 ("ata: libata-scsi: Honor the D_SENSE bit for
CK_COND=1 and no error") fixed this bug for successful ATA PASS-THROUGH
commands.
However, after commit 28ab976911 ("ata: libata-scsi: Honor the D_SENSE
bit for CK_COND=1 and no error"), there were bug reports that hdparm,
hddtemp, and udisks were no longer working as expected.
These applications incorrectly assume the returned sense data is in
descriptor format, without even looking at the RESPONSE CODE field in the
returned sense data (to see which format the returned sense data is in).
Considering that there will be broken versions of these applications around
roughly forever, we are stuck with being bug compatible with older kernels.
Cc: stable@vger.kernel.org # 4.19+
Reported-by: Stephan Eisvogel <eisvogel@seitics.de>
Reported-by: Christian Heusel <christian@heusel.eu>
Closes: https://lore.kernel.org/linux-ide/0bf3f2f0-0fc6-4ba5-a420-c0874ef82d64@heusel.eu/
Fixes: 28ab976911 ("ata: libata-scsi: Honor the D_SENSE bit for CK_COND=1 and no error")
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240813131900.1285842-2-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
The capstone devel headers define 'struct bpf_insn' in a way that clashes with
what is in the libbpf devel headers, so we so far need to avoid including both.
This is happening on the tools/build/feature/test-all.c file, where we try
building all the expected set of libraries to be normally available on a
system:
⬢[acme@toolbox perf-tools-next]$ cat /tmp/build/perf-tools-next/feature/test-all.make.output
In file included from test-bpf.c:3,
from test-all.c:150:
/home/acme/git/perf-tools-next/tools/include/uapi/linux/bpf.h:77:8: error: ‘bpf_insn’ defined as wrong kind of tag
77 | struct bpf_insn {
| ^~~~~~~~
⬢[acme@toolbox perf-tools-next]$ cat /tmp/build/perf-tools-next/feature/test-all.make.output
When doing so there is a trick where we define main to be
main_test_libcapstone, then include the individual
tools/build/feture/test-libcapstone.c capability query test, and then we undef
'main' because we'll do it all over again with the next expected library to
be tested (at this time 'lzma').
To complete this mechanism we need to, in test-all.c 'main' routine, to
call main_test_libcapstone(), which isn't being done, so the effect of
adding references to capstone in test-all.c are not achieved.
The only thing that is happening is that test-all.c is failing to build and thus
all the tests will have to be done individually, which nullifies the test-all.c
single build speedup.
So lets remove references to capstone from test-all.c to see if this makes it
build again so that we get faster builds or go on fixing up whatever is
preventing us to get that benefit.
Nothing: after this fix we get a clean test-all.c build and get the build speedup back:
⬢[acme@toolbox perf-tools-next]$ cat /tmp/build/perf-tools-next/feature/test-all.make.output
⬢[acme@toolbox perf-tools-next]$ cat /tmp/build/perf-tools-next/feature/test-all.
test-all.bin test-all.d test-all.make.output
⬢[acme@toolbox perf-tools-next]$ cat /tmp/build/perf-tools-next/feature/test-all.make.output
⬢[acme@toolbox perf-tools-next]$ ldd /tmp/build/perf-tools-next/feature/test-all.bin
linux-vdso.so.1 (0x00007f13277a1000)
libpython3.12.so.1.0 => /lib64/libpython3.12.so.1.0 (0x00007f1326e00000)
libm.so.6 => /lib64/libm.so.6 (0x00007f13274be000)
libtraceevent.so.1 => /lib64/libtraceevent.so.1 (0x00007f1327496000)
libtracefs.so.1 => /lib64/libtracefs.so.1 (0x00007f132746f000)
libcrypto.so.3 => /lib64/libcrypto.so.3 (0x00007f1326800000)
libunwind-x86_64.so.8 => /lib64/libunwind-x86_64.so.8 (0x00007f1327452000)
libunwind.so.8 => /lib64/libunwind.so.8 (0x00007f1327436000)
liblzma.so.5 => /lib64/liblzma.so.5 (0x00007f1327403000)
libdw.so.1 => /lib64/libdw.so.1 (0x00007f1326d6f000)
libz.so.1 => /lib64/libz.so.1 (0x00007f13273e2000)
libelf.so.1 => /lib64/libelf.so.1 (0x00007f1326d53000)
libnuma.so.1 => /lib64/libnuma.so.1 (0x00007f13273d4000)
libslang.so.2 => /lib64/libslang.so.2 (0x00007f1326400000)
libperl.so.5.38 => /lib64/libperl.so.5.38 (0x00007f1326000000)
libc.so.6 => /lib64/libc.so.6 (0x00007f1325e0f000)
libzstd.so.1 => /lib64/libzstd.so.1 (0x00007f1326741000)
/lib64/ld-linux-x86-64.so.2 (0x00007f13277a3000)
libbz2.so.1 => /lib64/libbz2.so.1 (0x00007f1326d3f000)
libcrypt.so.2 => /lib64/libcrypt.so.2 (0x00007f1326d07000)
⬢[acme@toolbox perf-tools-next]$
And when having capstone-devel installed we get it detected and linked with
perf, allowing us to benefit from the features that it enables:
⬢[acme@toolbox perf-tools-next]$ rpm -q capstone-devel
capstone-devel-5.0.1-3.fc40.x86_64
⬢[acme@toolbox perf-tools-next]$ ldd /tmp/build/perf-tools-next/perf | grep capstone
libcapstone.so.5 => /lib64/libcapstone.so.5 (0x00007fe6a5c00000)
⬢[acme@toolbox perf-tools-next]$ /tmp/build/perf-tools-next/perf -vv | grep cap
libcapstone: [ on ] # HAVE_LIBCAPSTONE_SUPPORT
⬢[acme@toolbox perf-tools-next]$
Fixes: 8b767db330 ("perf: build: introduce the libcapstone")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/Zry0sepD5Ppa5YKP@x1
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add support to the rkisp1 driver for the companding block that exists on
the i.MX8MP version of the ISP. This requires usage of the new
extensible parameters format, and showcases how the format allows for
extensions without breaking backward compatibility.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Add feature flags for the dedicated black level subtraction hardware
block and for the compand hardware block. The companding feature flag is
added on its own (as opposed to "the absence of BLS") because we will
need it later for when we add support for the companding block.
Skip BLS configuration when the BLS feature flag is unset, as devices
without the dedicated BLS block cannot configure a hardware block that
doesn't exist.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To prepare for adding support for the companding block to the rkisp1
driver for the version of the ISP on the i.MX8MP, add the register
definitions for it, including relevant register field values.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Future ISP parameter blocks for i.MX8MP-specific features will not
support on Rockchip platforms as they lack the corresponding hardware.
Introduce a features mask in the extensible block handlers to indicate
which device features a block require, and ignore blocks that require
unavailable features.
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
The BLS parameters passed by userspace are specified for named colour
channels (R, Gr, Gb and B), while the hardware registers reference
positions in the 2x2 CFA pattern (A, B, C and D).
The BLS values are swapped based on the CFA pattern when writing to or
reading from registers, using hand-roled switch statements. The logic is
duplicated already, and new code will require similar processing. Move
the swap logic to a shared function, using static data to control the
channels order.
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Implement in the rkisp1 driver support for the s_fmt and try_fmt
operation to allow userspace to select between the extensible
and the fixed parameters formats.
Implement enum_mbus_code to enumerate the fixed and the extensible
formats and disallow changing the data format while the queue is busy.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Implement support in rkisp1-params for the extensible configuration
parameters format.
Create a list of handlers for each ISP block that wraps the existing
configuration functions and handles the ISP block enablement.
Parse the configuration parameters buffer in rkisp1_ext_params_config
and filter the enable blocks by group, to allow setting the 'other'
groups separately from the 'lsc' group to support the pre/post-configure
operations.
Implement parameter buffer validation for the extensible format at
.buf_prepare() time.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Enhance the test case for the branch counter feature.
Now, the test verifies:
- The new filter can be successfully applied on the supported platforms.
- The counter value can be outputted via the perf report -D
- The counter value and the abbr name can be outputted via the
perf script (New)
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20240813160208.2493643-10-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
