for_each_btree_node() now works similarly to for_each_btree_key(), where
the loop body is passed as an argument to be passed to lockrestart_do().
This now calls trans_begin() on every loop iteration - which fixes an
SRCU warning in backpointers fsck.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
bch2_trigger_alloc was assuming that the new key would always be newly
created and thus always an alloc_v4 key, but - not when called from
btree_gc.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
bch2_btree_path_traverse_cached() was previously checking if it could
just relock the path, which is a common idiom in path traversal.
However, it was using btree_node_relock(), not btree_path_relock();
btree_path_relock() only succeeds if the path was in state
BTREE_ITER_NEED_RELOCK.
If the path was in state BTREE_ITER_NEED_TRAVERSE a full traversal is
needed; this led to a null ptr deref in
bch2_btree_path_traverse_cached().
And the short circuit check here isn't needed, since it was already done
in the main bch2_btree_path_traverse_one().
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Keep the URL in a single line for easier copy-pasting.
Signed-off-by: Enguerrand de Ribaucourt <enguerrand.de-ribaucourt@savoirfairelinux.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Link: https://patch.msgid.link/20240812124346.597702-1-enguerrand.de-ribaucourt@savoirfairelinux.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The value passed as the l3_proto argument of mvneta_txq_desc_csum()
is __be16. And mvneta_txq_desc_csum uses this parameter as a __be16
value. So use __be16 as the type for the parameter, rather than
type with host byte order.
Flagged by Sparse as:
.../mvneta.c:1796:25: warning: restricted __be16 degrades to integer
.../mvneta.c:1979:45: warning: incorrect type in argument 2 (different base types)
.../mvneta.c:1979:45: expected int l3_proto
.../mvneta.c:1979:45: got restricted __be16 [usertype] l3_proto
No functional change intended.
Flagged by Sparse.
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Marcin Wojtas <marcin.s.wojtas@gmail.com>
Link: https://patch.msgid.link/20240812-mvneta-be16-v1-1-e1ea12234230@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
`fec_ptp_pps_perout()` reimplements logic already
in `fec_ptp_read()`. Replace with function call.
Signed-off-by: Csókás, Bence <csokas.bence@prolan.hu>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20240812094713.2883476-2-csokas.bence@prolan.hu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ssn_offset field is u32 and is placed into the netlink response with
nla_put_u32(), but only 2 bytes are reserved for the attribute payload
in subflow_get_info_size() (even though it makes no difference
in the end, as it is aligned up to 4 bytes). Supply the correct
argument to the relevant nla_total_size() call to make it less
confusing.
Fixes: 5147dfb508 ("mptcp: allow dumping subflow context to userspace")
Signed-off-by: Eugene Syromiatnikov <esyr@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240812065024.GA19719@asgard.redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
'struct config_item_type' is not modified in this driver.
This structure is only used with config_group_init_type_name() which takes
a const struct config_item_type* as a 3rd argument.
This also makes things consistent with 'netconsole_target_type' witch is
already const.
Constifying this structure moves some data to a read-only section, so
increase overall security, especially when the structure holds some
function pointers.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
33007 3952 1312 38271 957f drivers/net/netconsole.o
After:
=====
text data bss dec hex filename
33071 3888 1312 38271 957f drivers/net/netconsole.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/9c205b2b4bdb09fc9e9d2cb2f2936ec053da1b1b.1723325900.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a device option to inform the driver about the hash key size and
hash table size used by the device. This information will be stored and
made available for RSS ethtool operations.
Signed-off-by: Ziwei Xiao <ziweixiao@google.com>
Signed-off-by: Praveen Kaligineedi <pkaligineedi@google.com>
Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240812222013.1503584-2-pkaligineedi@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On little-endian systems, doing subtraction after htons()
leads to interesting results:
Given:
MAGIC_BYTES = 123 = 0x007B aka. in big endian: 0x7B00 = 31488
sizeof(struct iphdr) = 20
Before this patch:
__bpf_constant_htons(MAGIC_BYTES) - sizeof(struct iphdr) = 0x7AEC
0x7AEC = htons(0xEC7A) = htons(60538)
So these were outer IP packets with a total length of 123 bytes,
containing an inner IP packet with a total length of 60538 bytes.
After this patch:
__bpf_constant_htons(MAGIC_BYTES - sizeof(struct iphdr)) = htons(103)
Now these packets are outer IP packets with a total length of 123 bytes,
containing an inner IP packet with a total length of 103 bytes.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Toke Høiland-Jørgensen <toke@kernel.org>
Link: https://lore.kernel.org/r/20240808075906.1849564-1-ast@fiberby.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
- binfmt_flat: Fix corruption when not offsetting data start
- exec: Fix ToCToU between perm check and set-uid/gid usage
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRSPkdeREjth1dHnSE2KwveOeQkuwUCZrvBmwAKCRA2KwveOeQk
u9Z2AQDgtypF4Kficiwn9BwZL5OxCxr9XnFuCYUue8Ufzm2WdQEAwhl1tcbs+Auf
VAqpr6gZTRlpBjbl55LHeyMdxIbwhg4=
=L28M
-----END PGP SIGNATURE-----
Merge tag 'execve-v6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull execve fixes from Kees Cook:
- binfmt_flat: Fix corruption when not offsetting data start
- exec: Fix ToCToU between perm check and set-uid/gid usage
* tag 'execve-v6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
exec: Fix ToCToU between perm check and set-uid/gid usage
binfmt_flat: Fix corruption when not offsetting data start
Replace additionalProperties with unevaluatedProperties because it have
allOf: $ref: ethernet-controller.yaml#.
Remove all properties, which already defined in ethernet-controller.yaml.
Fixed below CHECK_DTBS warnings:
arch/arm64/boot/dts/freescale/fsl-lx2160a-bluebox3.dtb:
fsl-mc@80c000000: dpmacs:ethernet@11: 'fixed-link' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/misc/fsl,qoriq-mc.yaml#
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240811184049.3759195-1-Frank.Li@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All failure exits prior to fdget() leave the scope, all matching fdput()
are immediately followed by leaving the scope.
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
fdget() is the first thing done in scope, all matching fdput() are
immediately followed by leaving the scope.
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Calling conventions for __bpf_map_get() would be more convenient
if it left fpdut() on failure to callers. Makes for simpler logics
in the callers.
Among other things, the proof of memory safety no longer has to
rely upon file->private_data never being ERR_PTR(...) for bpffs files.
Original calling conventions made it impossible for the caller to tell
whether __bpf_map_get() has returned ERR_PTR(-EINVAL) because it has found
the file not be a bpf map one (in which case it would've done fdput())
or because it found that ERR_PTR(-EINVAL) in file->private_data of a
bpf map file (in which case fdput() would _not_ have been done).
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Factor out the logic to extract bpf_map instances from FD embedded in
bpf_insns, adding it to the list of used_maps (unless it's already
there, in which case we just reuse map's index). This simplifies the
logic in resolve_pseudo_ldimm64(), especially around `struct fd`
handling, as all that is now neatly contained in the helper and doesn't
leak into a dozen error handling paths.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Swith fdget_raw() use cases in bpf_inode_storage.c to CLASS(fd_raw).
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Add the missing geni_icc_disable() call before returning in the
geni_i2c_runtime_resume() function.
Commit 9ba48db9f7 ("i2c: qcom-geni: Add missing
geni_icc_disable in geni_i2c_runtime_resume") by Gaosheng missed
disabling the interconnect in one case.
Fixes: bf225ed357 ("i2c: i2c-qcom-geni: Add interconnect support")
Cc: Gaosheng Cui <cuigaosheng1@huawei.com>
Cc: stable@vger.kernel.org # v5.9+
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Irregularity here is fdput() not in the same scope as fdget();
just fold ____bpf_prog_get() into its (only) caller and that's
it...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Correct spelling problems for Documentation/networking/ as reported
by ispell.
Signed-off-by: Jing-Ping Jan <zoo868e@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240812170910.5760-1-zoo868e@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for offloading cls U32 filters. Only "skbedit queue_mapping"
and "drop" actions are supported. Also, only "ip" and "802_3" tc
protocols are allowed. The PF must advertise the VIRTCHNL_VF_OFFLOAD_TC_U32
capability flag.
Since the filters will be enabled via the FD stage at the PF, a new type
of FDIR filters is added and the existing list and state machine are used.
The new filters can be used to configure flow directors based on raw
(binary) pattern in the rx packet.
Examples:
0. # tc qdisc add dev enp175s0v0 ingress
1. Redirect UDP from src IP 192.168.2.1 to queue 12:
# tc filter add dev <dev> protocol ip ingress u32 \
match u32 0x45000000 0xff000000 at 0 \
match u32 0x00110000 0x00ff0000 at 8 \
match u32 0xC0A80201 0xffffffff at 12 \
match u32 0x00000000 0x00000000 at 24 \
action skbedit queue_mapping 12 skip_sw
2. Drop all ICMP:
# tc filter add dev <dev> protocol ip ingress u32 \
match u32 0x45000000 0xff000000 at 0 \
match u32 0x00010000 0x00ff0000 at 8 \
match u32 0x00000000 0x00000000 at 24 \
action drop skip_sw
3. Redirect ICMP traffic from MAC 3c:fd:fe:a5:47:e0 to queue 7
(note proto: 802_3):
# tc filter add dev <dev> protocol 802_3 ingress u32 \
match u32 0x00003CFD 0x0000ffff at 4 \
match u32 0xFEA547E0 0xffffffff at 8 \
match u32 0x08004500 0xffffff00 at 12 \
match u32 0x00000001 0x000000ff at 20 \
match u32 0x0000 0x0000 at 40 \
action skbedit queue_mapping 7 skip_sw
Notes on matches:
1 - All intermediate fields that are needed to parse the correct PTYPE
must be provided (in e.g. 3: Ethernet Type 0x0800 in MAC, IP version
and IP length: 0x45 and protocol: 0x01 (ICMP)).
2 - The last match must provide an offset that guarantees all required
headers are accounted for, even if the last header is not matched.
For example, in #2, the last match is 4 bytes at offset 24 starting
from IP header, so the total is 14 (MAC) + 24 + 4 = 42, which is the
sum of MAC+IP+ICMP headers.
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
In preparation for a second type of FDIR filters that can be added by
tc-u32, move the add/del of the FDIR logic to be entirely contained in
iavf_fdir.c.
The iavf_find_fdir_fltr_by_loc() is renamed to iavf_find_fdir_fltr()
to be more agnostic to the filter ID parameter (for now @loc, which is
relevant only to current FDIR filters added via ethtool).
The FDIR filter deletion is moved from iavf_del_fdir_ethtool() in
ethtool.c to iavf_fdir_del_fltr(). While at it, fix a minor bug where
the "fltr" is accessed out of the fdir_fltr_lock spinlock protection.
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Enable VFs to create FDIR filters from raw binary patterns.
The corresponding processes for raw flow are added in the
Parse / Create / Destroy stages.
Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
Co-developed-by: Ahmed Zaki <ahmed.zaki@intel.com>
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The SWAP Flag in the FDIR Programming Descriptor doesn't work properly,
it is always set and cannot be unset (hardware bug). Thus, add a method
to effectively disable the FDIR SWAP option by setting the FDSWAP instead
of FDINSET registers.
Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The patch extends existing virtchnl_proto_hdrs structure to allow VF
to pass a pair of buffers as packet data and mask that describe
a match pattern of a filter rule. Then the kernel PF driver is requested
to parse the pair of buffer and figure out low level hardware metadata
(ptype, profile, field vector.. ) to program the expected FDIR or RSS
rules.
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add API ice_parser_profile_init() to init a parser profile based on
a parser result and a mask buffer. The ice_parser_profile struct is used
by the low level FXP engine to create HW profile/field vectors.
Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add support for the vxlan, geneve, ecpri UDP tunnels through the
following APIs:
- ice_parser_vxlan_tunnel_set()
- ice_parser_geneve_tunnel_set()
- ice_parser_ecpri_tunnel_set()
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add API ice_parser_dvm_set() to support turning on/off the parser's double
vlan mode.
Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
Co-developed-by: Ahmed Zaki <ahmed.zaki@intel.com>
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add the following internal helper functions:
- ice_bst_tcam_match():
to perform ternary match on boost TCAM.
- ice_pg_cam_match():
to perform parse graph key match in cam table.
- ice_pg_nm_cam_match():
to perform parse graph key no match in cam table.
- ice_ptype_mk_tcam_match():
to perform ptype markers match in tcam table.
- ice_flg_redirect():
to redirect parser flags to packet flags.
- ice_xlt_kb_flag_get():
to aggregate 64 bit packet flag into 16 bit key builder flags.
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Parse the following DDP sections:
- ICE_SID_RXPARSER_IMEM into an array of struct ice_imem_item
- ICE_SID_RXPARSER_METADATA_INIT into an array of struct ice_metainit_item
- ICE_SID_RXPARSER_CAM or ICE_SID_RXPARSER_PG_SPILL into an array of
struct ice_pg_cam_item
- ICE_SID_RXPARSER_NOMATCH_CAM or ICE_SID_RXPARSER_NOMATCH_SPILL into an
array of struct ice_pg_nm_cam_item
- ICE_SID_RXPARSER_CAM into an array of ice_bst_tcam_item
- ICE_SID_LBL_RXPARSER_TMEM into an array of ice_lbl_item
- ICE_SID_RXPARSER_MARKER_PTYPE into an array of ice_ptype_mk_tcam_item
- ICE_SID_RXPARSER_MARKER_GRP into an array of ice_mk_grp_item
- ICE_SID_RXPARSER_PROTO_GRP into an array of ice_proto_grp_item
- ICE_SID_RXPARSER_FLAG_REDIR into an array of ice_flg_rd_item
- ICE_SID_XLT_KEY_BUILDER_SW, ICE_SID_XLT_KEY_BUILDER_ACL,
ICE_SID_XLT_KEY_BUILDER_FD and ICE_SID_XLT_KEY_BUILDER_RSS into
struct ice_xlt_kb
Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
Co-developed-by: Ahmed Zaki <ahmed.zaki@intel.com>
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add new parser module which can parse a packet in binary and generate
information like ptype, protocol/offset pairs and flags which can be later
used to feed the FXP profile creation directly.
Add skeleton of the create and destroy APIs:
ice_parser_create()
ice_parser_destroy()
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
Co-developed-by: Ahmed Zaki <ahmed.zaki@intel.com>
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
When of_irq_parse_raw() is invoked with a device address smaller than
the interrupt parent node (from #address-cells property), KASAN detects
the following out-of-bounds read when populating the initial match table
(dyndbg="func of_irq_parse_* +p"):
OF: of_irq_parse_one: dev=/soc@0/picasso/watchdog, index=0
OF: parent=/soc@0/pci@878000000000/gpio0@17,0, intsize=2
OF: intspec=4
OF: of_irq_parse_raw: ipar=/soc@0/pci@878000000000/gpio0@17,0, size=2
OF: -> addrsize=3
==================================================================
BUG: KASAN: slab-out-of-bounds in of_irq_parse_raw+0x2b8/0x8d0
Read of size 4 at addr ffffff81beca5608 by task bash/764
CPU: 1 PID: 764 Comm: bash Tainted: G O 6.1.67-484c613561-nokia_sm_arm64 #1
Hardware name: Unknown Unknown Product/Unknown Product, BIOS 2023.01-12.24.03-dirty 01/01/2023
Call trace:
dump_backtrace+0xdc/0x130
show_stack+0x1c/0x30
dump_stack_lvl+0x6c/0x84
print_report+0x150/0x448
kasan_report+0x98/0x140
__asan_load4+0x78/0xa0
of_irq_parse_raw+0x2b8/0x8d0
of_irq_parse_one+0x24c/0x270
parse_interrupts+0xc0/0x120
of_fwnode_add_links+0x100/0x2d0
fw_devlink_parse_fwtree+0x64/0xc0
device_add+0xb38/0xc30
of_device_add+0x64/0x90
of_platform_device_create_pdata+0xd0/0x170
of_platform_bus_create+0x244/0x600
of_platform_notify+0x1b0/0x254
blocking_notifier_call_chain+0x9c/0xd0
__of_changeset_entry_notify+0x1b8/0x230
__of_changeset_apply_notify+0x54/0xe4
of_overlay_fdt_apply+0xc04/0xd94
...
The buggy address belongs to the object at ffffff81beca5600
which belongs to the cache kmalloc-128 of size 128
The buggy address is located 8 bytes inside of
128-byte region [ffffff81beca5600, ffffff81beca5680)
The buggy address belongs to the physical page:
page:00000000230d3d03 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1beca4
head:00000000230d3d03 order:1 compound_mapcount:0 compound_pincount:0
flags: 0x8000000000010200(slab|head|zone=2)
raw: 8000000000010200 0000000000000000 dead000000000122 ffffff810000c300
raw: 0000000000000000 0000000000200020 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffffff81beca5500: 04 fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffffff81beca5580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffffff81beca5600: 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
^
ffffff81beca5680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffffff81beca5700: 00 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc
==================================================================
OF: -> got it !
Prevent the out-of-bounds read by copying the device address into a
buffer of sufficient size.
Signed-off-by: Stefan Wiehler <stefan.wiehler@nokia.com>
Link: https://lore.kernel.org/r/20240812100652.3800963-1-stefan.wiehler@nokia.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
The different approach used by xe regarding the initialization of
display HW has been proved a great addition for early driver bring up:
core xe can be tested without having all the bits sorted out on the
display side.
On the other hand, the approach exposed by i915-display is to *actively*
disable the display by programming it if needed, i.e. if it was left
enabled by firmware. It also has its use to make sure the HW is actually
disabled and not wasting power.
However having both the way it is in xe doesn't expose a good interface
wrt module params. From modinfo:
disable_display:Disable display (default: false) (bool)
enable_display:Enable display (bool)
Rename enable_display to probe_display to try to convey the message that
the HW is being touched and improve the module param description. To
avoid confusion, the enable_display is renamed everywhere, not only in
the module param. New description for the parameters:
disable_display:Disable display (default: false) (bool)
probe_display:Probe display HW, otherwise it's left untouched (default: true) (bool)
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240813141931.3141395-1-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
After converting the bcm2836-l1-intc DT binding to YAML, the DT schema
checks gave warnings like:
'local_intc@40000000' does not match '^interrupt-controller(@[0-9a-f,]+)*$'
So fix them accordingly.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20240812200358.4061-4-wahrenst@gmx.net
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
When opening a file for exec via do_filp_open(), permission checking is
done against the file's metadata at that moment, and on success, a file
pointer is passed back. Much later in the execve() code path, the file
metadata (specifically mode, uid, and gid) is used to determine if/how
to set the uid and gid. However, those values may have changed since the
permissions check, meaning the execution may gain unintended privileges.
For example, if a file could change permissions from executable and not
set-id:
---------x 1 root root 16048 Aug 7 13:16 target
to set-id and non-executable:
---S------ 1 root root 16048 Aug 7 13:16 target
it is possible to gain root privileges when execution should have been
disallowed.
While this race condition is rare in real-world scenarios, it has been
observed (and proven exploitable) when package managers are updating
the setuid bits of installed programs. Such files start with being
world-executable but then are adjusted to be group-exec with a set-uid
bit. For example, "chmod o-x,u+s target" makes "target" executable only
by uid "root" and gid "cdrom", while also becoming setuid-root:
-rwxr-xr-x 1 root cdrom 16048 Aug 7 13:16 target
becomes:
-rwsr-xr-- 1 root cdrom 16048 Aug 7 13:16 target
But racing the chmod means users without group "cdrom" membership can
get the permission to execute "target" just before the chmod, and when
the chmod finishes, the exec reaches brpm_fill_uid(), and performs the
setuid to root, violating the expressed authorization of "only cdrom
group members can setuid to root".
Re-check that we still have execute permissions in case the metadata
has changed. It would be better to keep a copy from the perm-check time,
but until we can do that refactoring, the least-bad option is to do a
full inode_permission() call (under inode lock). It is understood that
this is safe against dead-locks, but hardly optimal.
Reported-by: Marco Vanotti <mvanotti@google.com>
Tested-by: Marco Vanotti <mvanotti@google.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: stable@vger.kernel.org
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Signed-off-by: Kees Cook <kees@kernel.org>
Recent work on raspberry-power driver showed that even the
stacktrace on firmware property timeout doesn't provide
enough information. So add the first tag name to the warning
to be in line with a status error.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20240728114200.75559-2-wahrenst@gmx.net
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Convert binding doc maxim,ds26522.txt to yaml format.
Additional changes
- Remove spi-max-frequency because ref to
/schemas/spi/spi-peripheral-props.yaml
- Add address-cells and size-cells in example
Fix below warning:
arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dtb: /soc/spi@2100000/slic@2: failed to match any schema with compatible: ['maxim,ds26522']
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240809143208.3447888-1-Frank.Li@nxp.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Address warnings such as:
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-galaxy100.dtb: interrupt-controller@1e6c0080: 'valid-sources' does not match any of the regexes: 'pinctrl-[0-9]+'
and
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-galaxy100.dtb: /ahb/copro-interrupt-controller@1e6c2000: failed to match any schema with compatible: ['aspeed,ast2400-cvic', 'aspeed-cvic']
Note that the conversion to DT schema causes some further warnings to
be emitted, because the Aspeed devicetrees are not in great shape. These
new warnings are resolved in a separate series:
https://lore.kernel.org/lkml/20240802-dt-warnings-bmc-dts-cleanups-v1-0-1cb1378e5fcd@codeconstruct.com.au/
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240808-dt-warnings-irq-aspeed-dt-schema-v2-2-c2531e02633d@codeconstruct.com.au
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Squash warnings such as:
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-galaxy100.dtb: /ahb/interrupt-controller@1e6c0080: failed to match any schema with compatible: ['aspeed,ast2400-vic']
The YAML DT schema defines an optional property, valid-sources, which
was not previously described in the prose binding. It is added to
document existing practice in the Aspeed devicetrees. Unfortunately
the property seems to predate the requirement that vendor-specific
properties be prefixed.
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240808-dt-warnings-irq-aspeed-dt-schema-v2-1-c2531e02633d@codeconstruct.com.au
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Convert the NXP LPC3220 timer bindings to yaml format.
Add missing resets property as it is already being used in dts.
Cc: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Animesh Agarwal <animeshagarwal28@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240731074544.208411-1-animeshagarwal28@gmail.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
