Make them conforming to the TIP coding style guide.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Tested-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/all/20240802155440.402005874@linutronix.de
Only invoked from check_timer() which is __init too. Cleanup the variable
declaration while at it.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Tested-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/all/20240802155440.339321108@linutronix.de
Breno observed panics when using failslab under certain conditions during
runtime:
can not alloc irq_pin_list (-1,0,20)
Kernel panic - not syncing: IO-APIC: failed to add irq-pin. Can not proceed
panic+0x4e9/0x590
mp_irqdomain_alloc+0x9ab/0xa80
irq_domain_alloc_irqs_locked+0x25d/0x8d0
__irq_domain_alloc_irqs+0x80/0x110
mp_map_pin_to_irq+0x645/0x890
acpi_register_gsi_ioapic+0xe6/0x150
hpet_open+0x313/0x480
That's a pointless panic which is a leftover of the historic IO/APIC code
which panic'ed during early boot when the interrupt allocation failed.
The only place which might justify panic is the PIT/HPET timer_check() code
which tries to figure out whether the timer interrupt is delivered through
the IO/APIC. But that code does not require to handle interrupt allocation
failures. If the interrupt cannot be allocated then timer delivery fails
and it either panics due to that or falls back to legacy mode.
Cure this by removing the panic wrapper around __add_pin_to_irq_node() and
making mp_irqdomain_alloc() aware of the failure condition and handle it as
any other failure in this function gracefully.
Reported-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Breno Leitao <leitao@debian.org>
Tested-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Link: https://lore.kernel.org/all/ZqfJmUF8sXIyuSHN@gmail.com
Link: https://lore.kernel.org/all/20240802155440.275200843@linutronix.de
Update the path to the supported DTS files for ARM/Microchip (AT91)
SoC to ensure that the output of the get_maintainer.pl script includes
the email addresses of the maintainers for all files located in
arch/arm/boot/dts/microchip.
Suggested-by: Conor Dooley <conor@kernel.org>
Signed-off-by: Andrei Simion <andrei.simion@microchip.com>
Reviewed-by: Cristian Birsan <cristian.birsan@microchip.com>
Link: https://lore.kernel.org/r/20240731144100.182221-1-andrei.simion@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Currently, whenever a caller is providing an affinity hint for an
interrupt, the allocation code uses it to calculate the node and copies the
cpumask into irq_desc::affinity.
If the affinity for the interrupt is not marked 'managed' then the startup
of the interrupt ignores irq_desc::affinity and uses the system default
affinity mask.
Prevent this by setting the IRQD_AFFINITY_SET flag for the interrupt in the
allocator, which causes irq_setup_affinity() to use irq_desc::affinity on
interrupt startup if the mask contains an online CPU.
[ tglx: Massaged changelog ]
Fixes: 45ddcecbfa ("genirq: Use affinity hint in irqdesc allocation")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/all/20240806072044.837827-1-shayd@nvidia.com
The main boot sequence for Microchip AT91 devices is one of the
following:
1/ ROM BOOT -> AT91Bootstrap -> U-Boot -> Linux Kernel
2/ ROM BOOT -> AT91Bootstrap -> Linux Kernel
For case 1/ U-Boot is the stage where the Ethernet MAC addresses are set.
For case 2/ where U-Boot is skipped the Ethernet MAC addresses need to
be configured in Linux. For this add EEPROMs and nvmem-layout to describe
EUI48 MAC address regions.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
[andrei.simion@microchip.com: Add nvmem-layout to describe eui48 mac
region. Align compatible name with datasheet. Reword commit message.]
Signed-off-by: Andrei Simion <andrei.simion@microchip.com>
[claudiu.beznea: adjusted the new commit message]
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Link: https://lore.kernel.org/r/20240703084704.197697-3-andrei.simion@microchip.com
So it turns out that we have to do two passes of
pti_clone_entry_text(), once before initcalls, such that device and
late initcalls can use user-mode-helper / modprobe and once after
free_initmem() / mark_readonly().
Now obviously mark_readonly() can cause PMD splits, and
pti_clone_pgtable() doesn't like that much.
Allow the late clone to split PMDs so that pagetables stay in sync.
[peterz: Changelog and comments]
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lkml.kernel.org/r/20240806184843.GX37996@noisy.programming.kicks-ass.net
commit 0db880fc86 ("powerpc: Avoid nmi_enter/nmi_exit in real mode
interrupt.") has a config comment typo, and the #if/#else/#endif section
is small and doesn't nest additional #ifdefs so the comment is useless
and should be removed completely.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240807025604.2817577-1-ruanjinjie@huawei.com
This commit adds the rcutree.nohz_full_patience_delay=1000 kernel boot
parameter to the TREE07 scenario, on the observation that "if it ain't
tested, it don't work".
Signed-off-by: "Paul E. McKenney" <paulmck@kernel.org>
Signed-off-by: Neeraj Upadhyay <neeraj.upadhyay@kernel.org>
This driver doesn't use the driver_data member of struct i2c_device_id,
so don't explicitly initialize this member.
This prepares putting driver_data in an anonymous union which requires
either no initialization or named designators. But it's also a nice
cleanup on its own.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240804112032.3628645-2-u.kleine-koenig@baylibre.com
Framework Computer appears to be moving away from the Microchip embedded
controller seen in the Framework Laptop 13 with Intel Core 11th, 12th
and 13th generation processors. All newer models use a Nuvoton NPCX
embedded controller.
Changing the default DMI match for Framework's products to match their
newer product lines will reduce churn in this part of the cros_ec_lpc
driver.
The new match tables are:
- Microchip EC models
- "Laptop" (product, exact match) for the 11th gen. Intel Core
- "12th Gen Intel Core" (product, exact match)
- "13th Gen Intel Core" (product, exact match)
- Nuvoton NPCX models
- "Laptop" (product family, partial match)
Signed-off-by: Dustin L. Howett <dustin@howett.net>
Reviewed-by: Alexandru M Stan <ams@frame.work>
Link: https://lore.kernel.org/r/20240806-platform-chrome-cros_ec_lpcs-change-the-default-disposition-of-the-framework-laptop-v1-1-09e0d602b215@howett.net
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Replace FB_BLANK_ constants with their counterparts from the
backlight subsystem. The values are identical, so there's no
change in functionality or semantics.
via-pmu-backlight.c already includes backlight.h where the
BACKLIGHT constants are defined.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240731130720.1148872-3-tzimmermann@suse.de
Replace FB_BLANK_ constants with their counterparts from the
backlight subsystem. The values are identical, so there's no
change in functionality or semantics.
traps.c already includes backlight.h where the BACKLIGHT
constants are defined.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240731130720.1148872-2-tzimmermann@suse.de
Use of_property_present() to test for property presence rather than
of_get_property(). This is part of a larger effort to remove callers
of of_get_property() and similar functions. of_get_property() leaks
the DT property data pointer which is a problem for dynamically
allocated nodes which may be freed.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240731191312.1710417-9-robh@kernel.org
Commit f1d6588af9 tried to convert GPIO lookup tables to software
properties for the vbus gpio device, bit forgot the most important
step: actually attaching the new properties to the device.
Also fix up the name of the property array to reflect the board name,
and add missing gpio/property.h and devices.h includes absence of which
causes compile failures on some configurations.
Switch "#ifdef CONFIG_USB_PXA25X" to "#if IS_ENABLED(CONFIG_USB_PXA25X)"
because it should not matter if the driver is buolt in or a module, it
still need vbus controls.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Fixes: f1d6588af9 ("ARM: pxa/gumstix: convert vbus gpio to use software nodes")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Use double backticks instead of quotes for sysfs attribute value.
This makes sphinx generate the "mcu" and "cpu" values in monospace when
rendering to HTML.
Fixes: dfa556e45a ("platform: cznic: turris-omnia-mcu: Add support for MCU connected GPIOs")
Tested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Marek Behún <kabel@kernel.org>
Link: https://lore.kernel.org/r/20240730144924.25552-3-kabel@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Make the GPIO part of the driver optional, under a boolean config
option. Move the dependency to GPIOLIB and OF and the selection of
GPIOLIB_IRQCHIP to this new option.
This makes the turris-omnia-mcu driver available for compilation even if
GPIOLIB or OF are disabled.
Fixes: ed46f1f773 ("platform: cznic: turris-omnia-mcu: fix Kconfig dependencies")
Signed-off-by: Marek Behún <kabel@kernel.org>
Link: https://lore.kernel.org/r/20240719085756.30598-5-kabel@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Make the system poweroff and RTC wakeup part of the driver optional,
under a boolean config option. Move the dependency to RTC_CLASS to this
new option.
This makes the turris-omnia-mcu driver available for compilation even if
RTC_CLASS is disabled.
Fixes: ed46f1f773 ("platform: cznic: turris-omnia-mcu: fix Kconfig dependencies")
Signed-off-by: Marek Behún <kabel@kernel.org>
Link: https://lore.kernel.org/r/20240719085756.30598-4-kabel@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Make the TRNG part of the driver optional, under a boolean config
option.
This makes the driver turris-omnia-mcu available for compilation even if
HW_RANDOM is disabled.
Fixes: ed46f1f773 ("platform: cznic: turris-omnia-mcu: fix Kconfig dependencies")
Signed-off-by: Marek Behún <kabel@kernel.org>
Link: https://lore.kernel.org/r/20240719085756.30598-3-kabel@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Make the watchdog part of the driver optional, under a boolean config
option. Move the dependency to WATCHDOG to this new option, and change
the WATCHDOG_CORE dependency to selection, as is done in most watchdog
drivers.
This makes the turris-omnia-mcu driver available for compilation even if
WATCHDOG is disabled.
Fixes: ed46f1f773 ("platform: cznic: turris-omnia-mcu: fix Kconfig dependencies")
Signed-off-by: Marek Behún <kabel@kernel.org>
Link: https://lore.kernel.org/r/20240719085756.30598-2-kabel@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
We've had bugs in the past with incorrect integer conversions in disk
accounting code, which is why bucket helpers now always return s64s; add
a comment explaining this.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
implicit integer conversion is a fertile source of bugs, and we really
would rather not have the min()/max() macros doing it implicitly.
bcachefs appears to be the only place in the kernel where this happens,
so let's fix it.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
quot_frac is unused in serial8250_do_set_divisor() since commit
b2b4b8ed3c (serial: 8250_exar: Move custom divisor support out from
8250_port). So no point to pass it.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240805102046.307511-5-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Coverity reports (as CID 1536978) that uart_poll_init() passes
uninitialized pm_state to uart_change_pm(). It is in case the first 'if'
takes the true branch (does "goto out;").
Fix this and simplify the function by simple guard(mutex). The code
needs no labels after this at all. And it is pretty clear that the code
has not fiddled with pm_state at that point.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Fixes: 5e227ef2aa (serial: uart_poll_init() should power on the UART)
Cc: stable@vger.kernel.org
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20240805102046.307511-4-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit af224ca2df (serial: core: Prevent unsafe uart port access, part
3) added few uport == NULL checks. It added one to uart_shutdown(), so
the commit assumes, uport can be NULL in there. But right after that
protection, there is an unprotected "uart_port_dtr_rts(uport, false);"
call. That is invoked only if HUPCL is set, so I assume that is the
reason why we do not see lots of these reports.
Or it cannot be NULL at this point at all for some reason :P.
Until the above is investigated, stay on the safe side and move this
dereference to the if too.
I got this inconsistency from Coverity under CID 1585130. Thanks.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240805102046.307511-3-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In tty_dev_name_to_number(), a guard can help to make the code easier to
follow. Especially how 0 is returned in the successful case. So use a
guard there.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240805102046.307511-2-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use of_property_present() to test for property presence rather than
of_get_property(). This is part of a larger effort to remove callers
of of_get_property() and similar functions. of_get_property() leaks
the DT property data pointer which is a problem for dynamically
allocated nodes which may be freed.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240731191312.1710417-17-robh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The first element in uart_8250_port is a structure, so initializing
it to 0 causes a warning on newer compilers:
drivers/tty/serial/8250/8250_platform.c: In function 'serial8250_platform_probe':
drivers/tty/serial/8250/8250_platform.c:111:40: error: excess elements in struct initializer [-Werror]
111 | struct uart_8250_port uart = { 0 };
Use the modern empty {} initializer instead that works on all
supported compilers.
Fixes: d9e5a0ce2f ("serial: 8250_platform: Enable generic 16550A platform devices")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://lore.kernel.org/r/20240807075751.2206508-2-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The acpi_platform_serial_table[] array is defined globally without
an #ifdef check for CONFIG_ACPI, so ACPI_PTR() makes no sense
here:
drivers/tty/serial/8250/8250_platform.c:271:36: error: 'acpi_platform_serial_table' defined but not used [-Werror=unused-const-variable=]
271 | static const struct acpi_device_id acpi_platform_serial_table[] = {
Fixes: d9e5a0ce2f ("serial: 8250_platform: Enable generic 16550A platform devices")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Link: https://lore.kernel.org/r/20240807075751.2206508-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The return value uv_set_shared() and uv_remove_shared() (which are
wrappers around the share() function) is not always checked. The system
integrity of a protected guest depends on the Share and Unshare UVCs
being successful. This means that any caller that fails to check the
return value will compromise the security of the protected guest.
No code path that would lead to such violation of the security
guarantees is currently exercised, since all the areas that are shared
never get unshared during the lifetime of the system. This might
change and become an issue in the future.
The Share and Unshare UVCs can only fail in case of hypervisor
misbehaviour (either a bug or malicious behaviour). In such cases there
is no reasonable way forward, and the system needs to panic.
This patch replaces the return at the end of the share() function with
a panic, to guarantee system integrity.
Fixes: 5abb9351df ("s390/uv: introduce guest side ultravisor code")
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20240801112548.85303-1-imbrenda@linux.ibm.com
Message-ID: <20240801112548.85303-1-imbrenda@linux.ibm.com>
[frankja@linux.ibm.com: Fixed up patch subject]
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Kernel test robot reports i915 can hit a warn in kvmalloc_node which has
a purpose of dissalowing crazy size kernel allocations. This was added in
7661809d49 ("mm: don't allow oversized kvmalloc() calls"):
/* Don't even allow crazy sizes */
if (WARN_ON_ONCE(size > INT_MAX))
return NULL;
This would be kind of okay since i915 at one point dropped the need for
making a shadow copy of the relocation list, but then it got re-added in
fd1500fcd4 ("Revert "drm/i915/gem: Drop relocation slowpath".") a year
after Linus added the above warning.
It is plausible that the issue was not seen until now because to trigger
gem_exec_reloc test requires a combination of an relatively older
generation hardware but with at least 8GiB of RAM installed. Probably even
more depending on runtime checks.
Lets cap what we allow userspace to pass in using the matching limit.
There should be no issue for real userspace since we are talking about
"crazy" number of relocations which have no practical purpose.
*) Well IGT tests might get upset but they can be easily adjusted.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202405151008.6ddd1aaf-oliver.sang@intel.com
Cc: Kees Cook <keescook@chromium.org>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20240521101201.18978-1-tursulin@igalia.com
If CONFIG_USB_XHCI_PCI_RENESAS is enabled, xhci-pci conditionally
calls into the xhci-pci-renesas module, which means both modules must
be loaded to use any xHCI PCI controller.
The MODULE_FIRMWARE declaration in the base xhci-pci module causes
initramfs-tools to check for and warn about missing firmware for the
Renesas xHCI controllers, when any xHCI PCI controller is present.
And because of the previous oddity, simply moving this declaration to
xhci-pci-renesas wouldn't help.
To fix this, reverse the relationship between the modules:
- Remove the quirk for the Renesas xHCIs, and the driver_data
structure used only for them
- In xhci-pci:
- Rename xhci_pci_probe() to xhci_pci_common_probe()
- Export xhci_pci_common_probe() and xhci_pci_remove()
- Use a new probe function that rejects the Renesas xHCIs and then
calls the common probe function
- In xhci-pci-renesas:
- Stop exporting renesas_xhci_check_request_fw()
- Add a probe function that calls renesas_xhci_check_request_fw()
followed by xhci_pci_common_probe()
- Add and register a new pci_driver matching only the Renesas xHCIs
and using its own probe function, but with other operations the
same as in xhci-pci
- Make CONFIG_USB_XHCI_PCI_RENESAS depend on CONFIG_USB_XHCI_PCI,
not the other way around
Finally, move the MODULE_FIRMWARE declaration to xhci-pci-renesas.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Tested-by: Cyril Brulebois <cyril@debamax.com>
Link: https://lore.kernel.org/r/ZqqfXYRJf7kGaqus@decadent.org.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There's no need to get the length of an DT array property before
parsing the array. of_property_read_variable_u32_array() takes a minimum
and maximum length and returns the actual length (or error code).
This is part of a larger effort to remove callers of of_find_property()
and similar functions. of_find_property() leaks the DT struct property
and data pointers which is a problem for dynamically allocated nodes
which may be freed.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20240731201407.1838385-5-robh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace SET_RUNTIME_PM_OPS()/SET SYSTEM_SLEEP_PM_OPS() with their modern
RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() alternatives.
The combined usage of pm_ptr() and RUNTIME_PM_OPS/SYSTEM_SLEEP_PM_OPS()
allows the compiler to evaluate if the runtime suspend/resume() functions
are used at build time or are simply dead code.
This allows removing the __maybe_unused notation from the runtime
suspend/resume() functions.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20240806114231.2603055-1-festevam@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert array initializers to C99 syntax by adding the '=' after
each designated initializer.
Fix the following smatch warnings:
drivers/usb/gadget/function/u_audio.c:1117:20:
warning: obsolete array initializer, use C99 syntax
drivers/usb/gadget/function/u_audio.c:1124:28:
warning: obsolete array initializer, use C99 syntax
drivers/usb/gadget/function/u_audio.c:1131:19:
warning: obsolete array initializer, use C99 syntax
drivers/usb/gadget/function/u_audio.c:1138:27:
warning: obsolete array initializer, use C99 syntax
drivers/usb/gadget/function/u_audio.c:1145:25:
warning: obsolete array initializer, use C99 syntax
Also, fix two checkpatch.pl warnings:
WARNING: please, no spaces at the start of a line
+ [UAC_FBACK_CTRL] = {$
WARNING: please, no spaces at the start of a line
+ [UAC_MUTE_CTRL] = {$
Signed-off-by: Abhishek Tamboli <abhishektamboli9@gmail.com>
Reviewed-by: Ricardo B. Marliere <ricardo@marliere.net>
Link: https://lore.kernel.org/r/20240801190209.500373-1-abhishektamboli9@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, max configuration interfaces are limited to 16, which fails
for compositions containing 10 UVC configurations with interrupt ep
disabled along with other configurations , and we see bind failures
while allocating interface ID in uvc bind.
Increase max configuration interface to 32 to support any large
compositions limited to same size as usb device endpoints as
interfaces cannot be more than endpoints.
Signed-off-by: Akash Kumar <quic_akakum@quicinc.com>
Link: https://lore.kernel.org/r/20240801053003.15153-1-quic_akakum@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use of_property_present() to test for property presence rather than
of_get_property(). This is part of a larger effort to remove callers
of of_get_property() and similar functions. of_get_property() leaks
the DT property data pointer which is a problem for dynamically
allocated nodes which may be freed.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240731191312.1710417-18-robh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Instead of open-coding the call to tcpci_unregister_port() in various
places, let's just register a hook using devm_add_action_or_reset() so
that it gets called automatically as and when necessary by the device
management APIs.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240710-tcpc-cleanup-v1-15-0ec1f41f4263@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dev_err_probe() exists as a useful helper ensuring standardized
error messages during .probe() and using it also helps to make
the code more legible.
Use it.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240710-tcpc-cleanup-v1-14-0ec1f41f4263@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert register TCPC_VENDOR_ADC_CTRL1 to using GENMASK() and
FIELD_PREP() so as to keep using a similar approach throughout the code
base and make it arguably easier to read.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240710-tcpc-cleanup-v1-13-0ec1f41f4263@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert register TCPC_VENDOR_CC_CTRL3 to using GENMASK() so as to keep
using a similar approach throughout the code base and make it arguably
easier to read.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240710-tcpc-cleanup-v1-12-0ec1f41f4263@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert register TCPC_VENDOR_CC_CTRL2 to using GENMASK() and
FIELD_PREP() so as to keep using a similar approach throughout the code
base and make it arguably easier to read.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240710-tcpc-cleanup-v1-11-0ec1f41f4263@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
