The ROHM BU27034NUC was cancelled and BU27034ANUC is replacing this
sensor. The BU27034ANUC does not support all the gains or all the
integration times that were supported on BU27034NUC.
Srop unsupported times and gains
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://patch.msgid.link/19f8cca2b5498fbfea6e657b7b9c90b78516866a.1720176341.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The ROHM BU27034NUC was cancelled and BU27034ANUC is replacing this
sensor. These senors aren't compatible from the software point of view.
According to ROHM, the BU27034NUC was never mass-produced. Hence dropping
the BU27034NUC support and using this driver to support BU27034ANUC
should not be a problem to users. We however need to ensure than people
who use old kernel with the old BU27034NUC driver don't get the old
driver probed for the new sensor.
Prepare to use the BU27034NUC driver to support the new BU27034ANUC and
change the compatible to prevent probing the old driver with the new
sensor.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://patch.msgid.link/ed8b963b0cd3a84c06a494c79969a136d5abcf92.1720176341.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The BU27034NUC was cancelled before it entered mass production. It was
replaced by a new variant BU27034ANUC (note, added 'A'). The new
variant gained a few significant changes, like removal of the 3.rd data
channel and dropping some of the gain settings. This means that, from
software point of view these ICs are incompatible. Lux calculation based
on the data from the sensors needs to be done differently, and on the
BU27034ANUC the channel 3 data is missing. Also, the gain setting
differencies matter.
Unfortunately, the identification register was not changed so there is no
safe way for the software to distinguish the variants.
According to the ROHM HQ engineers, the old BU27034NUC should not be
encountered in the wild. Hence it makes sense to remove the support for
the old BU27034NUC and add support for the new BU27034ANUC. Change the
compatible in order to not load the incompatible old driver for new sensor
(or, if someone had the old sensor, the new driver for it).
Drop the compatible for old sensor which should not be in the wild and
add a new compatible for the new model with accurate model suffix
'anuc'. Rename the file to match the new compatible.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/c39f9c67b3c07a27d7a13109c7b69cff9cfd2b9b.1720176341.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The reading of the pressure and humidity value, requires an update of the
t_fine variable which happens by reading the temperature value.
So the bme680_read_{press/humid}() functions of the above sensors are
internally calling the equivalent bme680_read_temp() function in order to
update the t_fine value. By just looking at the code this relation is a
bit hidden and is not easy to understand why those channels are not
independent.
This commit tries to clear these thing a bit by splitting the
bme680_{read/compensate}_{temp/press/humid}() to the following:
i. bme680_read_{temp/press/humid}_adc(): read the raw value from the
sensor.
ii. bme680_calc_t_fine(): calculate the t_fine variable.
iii. bme680_get_t_fine(): get the t_fine variable.
iv. bme680_compensate_{temp/press/humid}(): compensate the adc values and
return the calculated value.
v. bme680_read_{temp/press/humid}(): combine calls of the aforementioned
functions to return the requested value.
Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Link: https://patch.msgid.link/20240609233826.330516-16-vassilisamir@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Whenever the sensor is set to forced mode, a TPHG cycle is triggered and
the values of temperature, pressure, humidity and gas become ready to be
read.
The setup of the forced mode to trigger measurements was located inside
the read_{temp/gas}() functions. This was not posing a functional problem
since read_{humid/press}() are internally calling read_temp() so the
forced mode is set through this call.
This is not very clear and it is kind of hidden that regardless of the
measurement, the setup of the forced mode needs to happen before any
measurement.
Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Link: https://patch.msgid.link/20240609233826.330516-15-vassilisamir@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
There is no need to explicitly configure the gas measurement registers
every time a gas measurement takes place. These are initial configurations
which are written in the beginning and they are not changed throughout
the lifetime of the driver.
If in the future, the device starts to support multiple configuration
profiles with variable heater duration and heater temperature, then they
could become members of the ->read_avail().
Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Link: https://patch.msgid.link/20240609233826.330516-14-vassilisamir@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
There are multiple cases in the probe function that dev_err_probe() fits
the needs, so use it.
Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Link: https://patch.msgid.link/20240609233826.330516-13-vassilisamir@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
In the majority of the error checks after a regmap_{read,write}()
operation the following coding style is used:
ret = regmap_{read,write}(data->regmap, ...);
if (ret < 0) {
dev_err(dev, ...);
return ret;
}
In this particular case it was different so change it for consistency.
Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Link: https://patch.msgid.link/20240609233826.330516-11-vassilisamir@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Move the buffers that are used in order to read data from the device in
the union which handles all the device read/write buffers. Also create
defines for the number of bytes that are being read from the device and
don't use magic numbers.
Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Link: https://patch.msgid.link/20240609233826.330516-10-vassilisamir@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Move the IIO device allocation before the actual initialization of the
chip to be more consistent with most IIO drivers and also to have the
ability to use any driver specific data for the chip initialization.
While at it, fix also a misaligned line.
Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Link: https://patch.msgid.link/20240609233826.330516-9-vassilisamir@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The LSB of the gas register was read first to check if the following
check was correct and then the MSB+LSB were read together. Simplify this
by reading together the MSB+LSB immediately.
Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Link: https://patch.msgid.link/20240609233826.330516-7-vassilisamir@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Sort headers in alphabetical order and split the iio specific functions
with a blank line
Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Link: https://patch.msgid.link/20240609233826.330516-6-vassilisamir@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The ACPI ID table was removed with the following 2 commits:
Commit b73d21dccf ("iio: bme680_i2c: Remove acpi_device_id table")
Commit f0e4057e97 ("iio: bme680_spi: Remove acpi_device_id table")
Remove the remaining ACPI related stuff to this driver since they are
not directly used.
Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Link: https://patch.msgid.link/20240609233826.330516-5-vassilisamir@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Delete any redundant casts in the code and use unsigned integers for the
raw adc values.
Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Link: https://patch.msgid.link/20240609233826.330516-4-vassilisamir@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add mutexes in the {read/write}_raw() functions of the device to guard the
read/write of data from/to the device. This is necessary because for any
operation other than temperature, multiple reads need to take place from
the device. Even though regmap has a locking by itself, it won't protect us
from multiple applications trying to read at the same time temperature and
pressure since the pressure reading includes an internal temperature
reading and there is nothing to ensure that this temperature+pressure
reading will happen sequentially without any other operation interfering
in the meantime.
Fixes: 1b3bd85927 ("iio: chemical: Add support for Bosch BME680 sensor")
Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Link: https://patch.msgid.link/20240609233826.330516-2-vassilisamir@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Fix description of the filter_mode_available attribute by pointing to
the correct name of the attribute that can be written with valid values.
Fixes: bf92d87d7c ("iio:filter:admv8818: Add sysfs ABI documentation")
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Link: https://patch.msgid.link/20240702081851.4663-1-antoniu.miclaus@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Don Brace <don.brace@microchip.com> says:
These patches are based on Martin Petersen's 6.11/scsi-queue tree
https://git.kernel.org/pub/scm/linux/kernel/git/mkp/scsi.git 6.11/scsi-queue
The functional changes of note to smartpqi are for: multipath failover
and improving the accuracy of our RAID bypass counter.
For multipath we are:
Reverting commit 94a68c8143 ("scsi: smartpqi: Quickly propagate
path failures to SCSI midlayer") because under certain rare
conditions involving encryption-enabled devices, a false path
failure is reported to the SML causing multipath to failover to
the other path.
Improving errors returned from the driver back to the SML by
checking for error codes returned from the firmware and returning
the correct ASC/ASCQ codes to the SML.
The other two patches add PCI-IDs for new controllers and change the
driver version.
Link: https://lore.kernel.org/r/20240711194704.982400-1-don.brace@microchip.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Update driver version to 2.1.28-025.
Reviewed-by: Mike Tran <mike.tran@microchip.com>
Reviewed-by: Gerry Morong <gerry.morong@microchip.com>
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Link: https://lore.kernel.org/r/20240711194704.982400-6-don.brace@microchip.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Improve multipath failovers by mapping firmware errors into I/O errors.
In some rare instances, firmware does not return the proper error code for
I/O errors caused by a multipath path failure.
Map I/O errors returned by firmware into errors that help the multipath
layer to detect the failure of a path.
Reviewed-by: Gerry Morong <gerry.morong@microchip.com>
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Link: https://lore.kernel.org/r/20240711194704.982400-5-don.brace@microchip.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Correct a rare multipath failure issue by reverting commit 94a68c8143
("scsi: smartpqi: Quickly propagate path failures to SCSI midlayer") [1].
Reason for revert: The patch propagated the path failure to SML quickly
when one of the path fails during IO and AIO path gets disabled for a
multipath device.
But it created a new issue: when creating a volume on an encryption-enabled
controller, the firmware reports the AIO path is disabled, which cause the
driver to report a path failure to SML for a multipath device.
There will be a new fix to handle "Illegal request" and "Invalid field in
parameter list" on RAID path when the AIO path is disabled on a multipath
device.
[1] https://lore.kernel.org/all/164375209313.440833.9992416628621839233.stgit@brunhilda.pdev.net/
Fixes: 94a68c8143 ("scsi: smartpqi: Quickly propagate path failures to SCSI midlayer")
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Signed-off-by: Gilbert Wu <Gilbert.Wu@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Link: https://lore.kernel.org/r/20240711194704.982400-4-don.brace@microchip.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The original implementation of this counter used an atomic variable.
However, this implementation negatively impacted performance in some
configurations.
Switch to using per_cpu variables.
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Co-developed-by: Mahesh Rajashekhara <mahesh.rajashekhara@microchip.com>
Signed-off-by: Mahesh Rajashekhara <mahesh.rajashekhara@microchip.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Link: https://lore.kernel.org/r/20240711194704.982400-3-don.brace@microchip.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There is a scenario where a large number of discard commands are issued
when the iscsi initiator connects to the target and then performs a session
rescan operation. There is a time window, most of the commands are in UNMAP
mode, and some discard commands become WRITE SAME with UNMAP.
The discard mode has been negotiated during the SCSI probe. If the mode is
temporarily changed from UNMAP to WRITE SAME with UNMAP, an I/O ERROR may
occur because the target may not implement WRITE SAME with UNMAP. Keep the
discard mode stable to fix this issue.
Signed-off-by: Li Feng <fengli@smartx.com>
Link: https://lore.kernel.org/r/20240718080751.313102-2-fengli@smartx.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Justin Tee <justintee8345@gmail.com> says:
Update lpfc to revision 14.4.0.4
This patch set contains diagnostic logging improvements, a minor clean
up when submitting abort requests, a bug fix related to reset and
errata paths, and modifications to FLOGI and PRLO ELS command
handling.
The patches were cut against Martin's 6.11/scsi-queue tree.
Link: https://lore.kernel.org/r/20240726231512.92867-1-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
A kref imbalance occurs when handling an unsolicited PRLO in direct
attached topology.
Rework PRLO rcv handling when in MAPPED state. Save the state that we were
handling a PRLO by setting nlp_last_elscmd to ELS_CMD_PRLO. Then in the
lpfc_cmpl_els_logo_acc() completion routine, manually restart discovery.
By issuing the PLOGI, which nlp_gets, before nlp_put at the end of the
lpfc_cmpl_els_logo_acc() routine, we are saving us from a final nlp_put.
And, we are still allowing the unreg_rpi to happen.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20240726231512.92867-7-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In direct attached topology, certain target vendors that are quick to issue
FLOGI followed by a cable pull for more than dev_loss_tmo may result in a
kref imbalance for the remote port ndlp object.
Add an nlp_get when the defer_flogi_acc flag is set. This is expected to
balance the nlp_put in the defer_flogi_acc clause in the
lpfc_issue_els_flogi() routine. Because we need to retain the ndlp ptr,
reorganize all of the defer_flogi_acc information into one
lpfc_defer_flogi_acc struct.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20240726231512.92867-6-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The vport->vmid_flag is unintentionally cleared twice after an issue_lip
via the lpfc_reinit_vmid routine().
The first call to lpfc_reinit_vmid() is in lpfc_cmpl_els_flogi(). Then
lpfc_cmpl_els_flogi_fabric() calls lpfc_register_new_vport(), which calls
lpfc_cmpl_reg_new_vport() when the mbox command completes and calls
lpfc_reinit_vmid() a second time.
Fix by moving the vmid_flag clear outside of the lpfc_reinit_vmid() routine
so that vmid_flag is only cleared once upon FLOGI completion.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20240726231512.92867-5-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When the HBA is undergoing a reset or is handling an errata event, NULL ptr
dereference crashes may occur in routines such as
lpfc_sli_flush_io_rings(), lpfc_dev_loss_tmo_callbk(), or
lpfc_abort_handler().
Add NULL ptr checks before dereferencing hdwq pointers that may have been
freed due to operations colliding with a reset or errata event handler.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20240726231512.92867-4-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The lpfc_sli_issue_abort_iotag() routine has a redundant assignment of
abtsiocbp->vport = vport;
The duplicate lines are from a previous refactoring, and this patch removes
the accidental redundancy.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20240726231512.92867-3-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
During diagnostics, it has been determined that the 0115 log message for
receipt of unknown ELS cmds does not benefit from trace buffer dumps. The
trace buffer dump floods the console with unnecessary information, and the
singular LOG_ELS flag has proven more beneficial in debugging efforts when
dealing with unknown ELS cmds.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20240726231512.92867-2-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The default UIC command timeout still remains 500ms. Allow platform
drivers to override the UIC command timeout if desired.
In a real product, the 500ms timeout value is probably good enough.
However, during the product development where there are a lot of logging
and debug messages being printed to the UART console, interrupt starvations
happen occasionally because the UART may print long debug messages from
different modules in the system. While printing, the UART may have
interrupts disabled for more than 500ms, causing UIC command timeout. The
UIC command timeout would trigger more printing from the UFS driver, and
eventually a watchdog timeout may occur unnecessarily.
Add support for overriding the UIC command timeout value with the newly
created uic_cmd_timeout kernel module parameter. Default value is
500ms. Supported values range from 500ms to 2 seconds.
Signed-off-by: Bao D. Nguyen <quic_nguyenb@quicinc.com>
Link: https://lore.kernel.org/r/e4e1c87f3f867f270a3d4b5d57a00139ff0e9741.1721792309.git.quic_nguyenb@quicinc.com
Suggested-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Replace the deprecated[1] use of 1-element arrays in struct sgmap, struct
sgmap64, struct sgmapraw, struct user_sgmap, and struct user_sgmap64 with
modern flexible arrays. Additionally remove struct user_sgmapraw as it is
unused.
The resulting binary output differences from this change are limited only
to stack space consumption of the smaller "srbu" variable in
aac_issue_safw_bmic_identify() and aac_get_safw_ciss_luns(), as well as the
smaller associated pair of memcpy()s in
aac_send_safw_bmic_cmd(). Artificially growing the size of srbu back to its
prior size removes all binary differences[2].
As an aside, after studying the aacraid driver code I wonder how
aac_send_wellness_command() ever works. It is reporting a size 4 bytes too
small for what it has constructed in memory in the DMA region: sgentry64 is
size 12, whereas sgentry is size 8. Perhaps the hardware doesn't
care. (Regardless, it is unchanged by this patch.)
Link: https://github.com/KSPP/linux/issues/79 [1]
Link: https://git.kernel.org/pub/scm/linux/kernel/git/kees/linux.git/commit/?h=dev/v6.10-rc2/1-element&id=45e6226bcbc5e982541754eca7ac29f403e82f5e [2]
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/r/20240711215739.208776-2-kees@kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
struct aac_srb_unit contains struct aac_srb, which contains struct sgmap,
which ends in a (currently) "fake" (1-element) flexible array. Converting
this to a flexible array is needed so that runtime bounds checking won't
think the array is fixed size (i.e. under CONFIG_FORTIFY_SOURCE=y and/or
CONFIG_UBSAN_BOUNDS=y), as other parts of aacraid use struct sgmap as a
flexible array.
It is not legal to have a flexible array in the middle of a structure, so
it either needs to be split up or rearranged so that it is at the end of
the structure. Luckily, struct aac_srb_unit, which is exclusively
consumed/updated by aac_send_safw_bmic_cmd(), does not depend on member
ordering.
The values set in the on-stack struct aac_srb_unit instance "srbu" by the
only two callers, aac_issue_safw_bmic_identify() and
aac_get_safw_ciss_luns(), do not contain anything in srbu.srb.sgmap.sg, and
they both implicitly initialize srbu.srb.sgmap.count to 0 during
memset(). For example:
memset(&srbu, 0, sizeof(struct aac_srb_unit));
srbcmd = &srbu.srb;
srbcmd->flags = cpu_to_le32(SRB_DataIn);
srbcmd->cdb[0] = CISS_REPORT_PHYSICAL_LUNS;
srbcmd->cdb[1] = 2; /* extended reporting */
srbcmd->cdb[8] = (u8)(datasize >> 8);
srbcmd->cdb[9] = (u8)(datasize);
rcode = aac_send_safw_bmic_cmd(dev, &srbu, phys_luns, datasize);
During aac_send_safw_bmic_cmd(), a separate srb is mapped into DMA, and has
srbu.srb copied into it:
srb = fib_data(fibptr);
memcpy(srb, &srbu->srb, sizeof(struct aac_srb));
Only then is srb.sgmap.count written and srb->sg populated:
srb->count = cpu_to_le32(xfer_len);
sg64 = (struct sgmap64 *)&srb->sg;
sg64->count = cpu_to_le32(1);
sg64->sg[0].addr[1] = cpu_to_le32(upper_32_bits(addr));
sg64->sg[0].addr[0] = cpu_to_le32(lower_32_bits(addr));
sg64->sg[0].count = cpu_to_le32(xfer_len);
But this is happening in the DMA memory, not in srbu.srb. An attempt to
copy the changes back to srbu does happen:
/*
* Copy the updated data for other dumping or other usage if
* needed
*/
memcpy(&srbu->srb, srb, sizeof(struct aac_srb));
But this was never correct: the sg64 (3 u32s) overlap of srb.sg (2 u32s)
always meant that srbu.srb would have held truncated information and any
attempt to walk srbu.srb.sg.sg based on the value of srbu.srb.sg.count
would result in attempting to parse past the end of srbu.srb.sg.sg[0] into
srbu.srb_reply.
After getting a reply from hardware, the reply is copied into
srbu.srb_reply:
srb_reply = (struct aac_srb_reply *)fib_data(fibptr);
memcpy(&srbu->srb_reply, srb_reply, sizeof(struct aac_srb_reply));
This has always been fixed-size, so there's no issue here. It is worth
noting that the two callers _never check_ srbu contents -- neither
srbu.srb nor srbu.srb_reply is examined. (They depend on the mapped
xfer_buf instead.)
Therefore, the ordering of members in struct aac_srb_unit does not matter,
and the flexible array member can moved to the end.
(Additionally, the two memcpy()s that update srbu could be entirely
removed as they are never consumed, but I left that as-is.)
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/r/20240711215739.208776-1-kees@kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Kees Cook <kees@kernel.org> says:
Replace all remaining uses of deprecated 1-element "fake" flexible
arrays with modern C99 flexible arrays. Add __counted_by annotations
at the same time.
Link: https://lore.kernel.org/r/20240711172432.work.523-kees@kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Replace the deprecated[1] use of a 1-element array in struct
_CONFIG_PAGE_IOC_4 with a modern flexible array.
Additionally add __counted_by annotation since SEP is only ever accessed
after updating ACtiveSEP:
lsi/mpi_cnfg.h: IOC_4_SEP SEP[] __counted_by(ActiveSEP); /* 08h */
mptsas.c: ii = IOCPage4Ptr->ActiveSEP++;
mptsas.c: IOCPage4Ptr->SEP[ii].SEPTargetID = id;
mptsas.c: IOCPage4Ptr->SEP[ii].SEPBus = channel;
No binary differences are present after this conversion.
Link: https://github.com/KSPP/linux/issues/79 [1]
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/r/20240711172821.123936-6-kees@kernel.org
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Replace the deprecated[1] use of a 1-element array in struct
_CONFIG_PAGE_IOC_3 with a modern flexible array.
Additionally add __counted_by annotation since PhysDisk is only ever
accessed via a loops bounded by NumPhysDisks:
lsi/mpi_cnfg.h: IOC_3_PHYS_DISK PhysDisk[] __counted_by(NumPhysDisks); /* 08h */
mptscsih.c: for (i = 0; i < ioc->raid_data.pIocPg3->NumPhysDisks; i++) {
mptscsih.c: if ((id == ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskID) &&
mptscsih.c: (channel == ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskBus)) {
mptscsih.c: for (i = 0; i < ioc->raid_data.pIocPg3->NumPhysDisks; i++) {
mptscsih.c: ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskNum);
mptscsih.c: ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskNum,
mptscsih.c: for (i = 0; i < ioc->raid_data.pIocPg3->NumPhysDisks; i++) {
mptscsih.c: if ((id == ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskID) &&
mptscsih.c: (channel == ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskBus)) {
mptscsih.c: rc = ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskNum;
mptscsih.c: for (i = 0; i < ioc->raid_data.pIocPg3->NumPhysDisks; i++) {
mptscsih.c: ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskNum);
mptscsih.c: ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskNum,
No binary differences are present after this conversion.
Link: https://github.com/KSPP/linux/issues/79 [1]
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/r/20240711172821.123936-5-kees@kernel.org
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Replace the deprecated[1] use of a 1-element array in struct
_CONFIG_PAGE_IOC_2 with a modern flexible array.
Additionally add __counted_by annotation since RaidVolume is only ever
accessed from loops controlled by NumActiveVolumes:
lsi/mpi_cnfg.h: CONFIG_PAGE_IOC_2_RAID_VOL RaidVolume[] __counted_by(NumActiveVolumes); /* 0Ch */
mptbase.c: for (i = 0; i < pIoc2->NumActiveVolumes ; i++)
mptbase.c: pIoc2->RaidVolume[i].VolumeBus,
mptbase.c: pIoc2->RaidVolume[i].VolumeID);
mptsas.c: for (i = 0; i < ioc->raid_data.pIocPg2->NumActiveVolumes; i++) {
mptsas.c: RaidVolume[i].VolumeID) {
mptsas.c: RaidVolume[i].VolumeBus;
mptsas.c: for (i = 0; i < ioc->raid_data.pIocPg2->NumActiveVolumes; i++) {
mptsas.c: ioc->raid_data.pIocPg2->RaidVolume[i].VolumeID, 0);
mptsas.c: ioc->raid_data.pIocPg2->RaidVolume[i].VolumeID);
mptsas.c: ioc->raid_data.pIocPg2->RaidVolume[i].VolumeID, 0);
mptsas.c: for (i = 0; i < ioc->raid_data.pIocPg2->NumActiveVolumes; i++) {
mptsas.c: if (ioc->raid_data.pIocPg2->RaidVolume[i].VolumeID ==
mptsas.c: for (i = 0; i < ioc->raid_data.pIocPg2->NumActiveVolumes; i++)
mptsas.c: if (ioc->raid_data.pIocPg2->RaidVolume[i].VolumeID == id)
mptspi.c: for (i=0; i < ioc->raid_data.pIocPg2->NumActiveVolumes; i++) {
mptspi.c: if (ioc->raid_data.pIocPg2->RaidVolume[i].VolumeID == id) {
No binary differences are present after this conversion.
Link: https://github.com/KSPP/linux/issues/79 [1]
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/r/20240711172821.123936-4-kees@kernel.org
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Replace the deprecated[1] use of a 1-element array in struct
_CONFIG_PAGE_RAID_PHYS_DISK_1 with a modern flexible array.
Additionally add __counted_by annotation since Path is only ever accessed
via a loops bounded by NumPhysDiskPaths:
lsi/mpi_cnfg.h: RAID_PHYS_DISK1_PATH Path[] __counted_by(NumPhysDiskPaths);/* 0Ch */
mptbase.c: phys_disk->NumPhysDiskPaths = buffer->NumPhysDiskPaths;
mptbase.c: for (i = 0; i < phys_disk->NumPhysDiskPaths; i++) {
mptbase.c: phys_disk->Path[i].PhysDiskID = buffer->Path[i].PhysDiskID;
mptbase.c: phys_disk->Path[i].PhysDiskBus = buffer->Path[i].PhysDiskBus;
No binary differences are present after this conversion.
Link: https://github.com/KSPP/linux/issues/79 [1]
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/r/20240711172821.123936-3-kees@kernel.org
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Replace the deprecated[1] use of a 1-element array in struct
_CONFIG_PAGE_SAS_IO_UNIT_0 with a modern flexible array.
Additionally add __counted_by annotation since PhyData is only ever
accessed via a loops bounded by NumPhys:
lsi/mpi_cnfg.h: MPI_SAS_IO_UNIT0_PHY_DATA PhyData[] __counted_by(NumPhys); /* 10h */
mptsas.c: port_info->num_phys = buffer->NumPhys;
mptsas.c: for (i = 0; i < port_info->num_phys; i++) {
mptsas.c: mptsas_print_phy_data(ioc, &buffer->PhyData[i]);
mptsas.c: port_info->phy_info[i].phy_id = i;
mptsas.c: port_info->phy_info[i].port_id =
mptsas.c: buffer->PhyData[i].Port;
mptsas.c: port_info->phy_info[i].negotiated_link_rate =
mptsas.c: buffer->PhyData[i].NegotiatedLinkRate;
No binary differences are present after this conversion.
Link: https://github.com/KSPP/linux/issues/79 [1]
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/r/20240711172821.123936-2-kees@kernel.org
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Replace the deprecated[1] use of a 1-element array in struct
_RAID_VOL0_SETTINGS with a modern flexible array.
Additionally add __counted_by annotation since PhysDisk is only ever
accessed via a loops bounded by NumPhysDisks:
lsi/mpi_cnfg.h: RAID_VOL0_PHYS_DISK PhysDisk[] __counted_by(NumPhysDisks); /* 28h */
mptbase.c: for (i = 0; i < buffer->NumPhysDisks; i++) {
mptbase.c: buffer->PhysDisk[i].PhysDiskNum, &phys_disk) != 0)
mptsas.c: for (i = 0; i < buffer->NumPhysDisks; i++) {
mptsas.c: buffer->PhysDisk[i].PhysDiskNum, &phys_disk) != 0)
mptsas.c: for (i = 0; i < buffer->NumPhysDisks; i++) {
mptsas.c: buffer->PhysDisk[i].PhysDiskNum, &phys_disk) != 0)
No binary differences are present after this conversion.
Link: https://github.com/KSPP/linux/issues/79 [1]
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/r/20240711172821.123936-1-kees@kernel.org
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Replace the deprecated[1] use of a 1-element arrays in struct
ipr_hostrcb_fabric_desc and struct ipr_hostrcb64_fabric_desc with modern
flexible arrays.
No binary differences are present after this conversion.
Link: https://github.com/KSPP/linux/issues/79 [1]
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/r/20240711180702.work.536-kees@kernel.org
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Replace the deprecated[1] use of a 1-element array in struct
aac_ciss_phys_luns_resp with a modern flexible array.
No binary differences are present after this conversion.
Link: https://github.com/KSPP/linux/issues/79 [1]
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/r/20240711175055.work.928-kees@kernel.org
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
