I3C controller should support adjusting open drain timing for the first
broadcast address to make I3C device working as a i2c device can see slow
broadcast address to close its Spike Filter to change working at i3c mode.
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Reviewed-by: Frank Li <frank.li@nxp.com>
Link: https://lore.kernel.org/r/20240910051626.4052552-2-carlos.song@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
According to I3C spec 6.2 Timing Specification, the Open Drain High Period
of SCL Clock timing for first broadcast address should be adjusted to 200ns
at least. I3C device working as i2c device will see the broadcast to close
its Spike Filter then change to work at I3C mode. After that I3C open drain
SCL high level should be adjusted back.
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240910051626.4052552-1-carlos.song@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
- The beginning of an EEVDF scheduler document
- More Chinese translations
- A rethrashing of our bisection documentation
...plus the usual array of smaller fixes, and more than the usual number of
typo fixes.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmboMnkACgkQF0NaE2wM
flha/Qf/e8zRinIYQJ7BmombNm39w3wUiNuXr8SWq7afqhsAJJzmOZ3oyyfssL+B
a1pSjhxb15UrKf1kMKhdBxhDndXvto5UekJRBY5gsTvcBMBmtIovN+ZK5Z5jObsw
gzHD9of08Ti7N4C2dSBdLPHtvIBX0rVeEK4oAH7AUaQviu1cfTaLQQA0dRYsaJeX
iXsts2NkGl6ZUF7mk4nlzj8+Y1zot+mCd6B53iSimNKxwsPODrCZUobJAvxg1qVU
pRCQcnpx2fTBnh4ugrcLZbautyhL9bJ8VQzFeoQgYpODDgDnZyTjN6kxv65LpxAz
dXi+hx5Vk7lP3BbTp9EeGn305/qQPA==
=JuBw
-----END PGP SIGNATURE-----
Merge tag 'docs-6.12' of git://git.lwn.net/linux
Pull documentation update from Jonathan Corbet:
"Another relatively mundane cycle for docs:
- The beginning of an EEVDF scheduler document
- More Chinese translations
- A rethrashing of our bisection documentation
...plus the usual array of smaller fixes, and more than the usual
number of typo fixes"
* tag 'docs-6.12' of git://git.lwn.net/linux: (48 commits)
Remove duplicate "and" in 'Linux NVMe docs.
docs:filesystems: fix spelling and grammar mistakes
docs:filesystem: fix mispelled words on autofs page
docs:mm: fixed spelling and grammar mistakes on vmalloc kernel stack page
Documentation: PCI: fix typo in pci.rst
docs/zh_CN: add the translation of kbuild/gcc-plugins.rst
docs/process: fix typos
docs:mm: fix spelling mistakes in heterogeneous memory management page
accel/qaic: Fix a typo
docs/zh_CN: update the translation of security-bugs
docs: block: Fix grammar and spelling mistakes in bfq-iosched.rst
Documentation: Fix spelling mistakes
Documentation/gpu: Fix typo in Documentation/gpu/komeda-kms.rst
scripts: sphinx-pre-install: remove unnecessary double check for $cur_version
Loongarch: KVM: Add KVM hypercalls documentation for LoongArch
Documentation: Document the kernel flag bdev_allow_write_mounted
docs: scheduler: completion: Update member of struct completion
docs: kerneldoc-preamble.sty: Suppress extra spaces in CJK literal blocks
docs: submitting-patches: Advertise b4
docs: update dev-tools/kcsan.rst url about KTSAN
...
- Use swap() helper for __arch_xchg(),
- Fix kernel_clone_args.flags in m68k_clone(),
- Defconfig updates.
-----BEGIN PGP SIGNATURE-----
iIsEABYIADMWIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCZuhAxBUcZ2VlcnRAbGlu
dXgtbTY4ay5vcmcACgkQisJQ/WRJ8XAOOAEAh7aKyeW/gMic3PQ7pe+14j0QveK0
HcqqCZ9StDWt8rIA/15DIW+/mBZoOEmzBWpYr3PNkMGqgYgR2GLhrT7azk0L
=89Xo
-----END PGP SIGNATURE-----
Merge tag 'm68k-for-v6.12-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k
Pull m68k updates from Geert Uytterhoeven:
- Use swap() helper for __arch_xchg()
- Fix kernel_clone_args.flags in m68k_clone()
- defconfig updates
* tag 'm68k-for-v6.12-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
m68k: defconfig: Update defconfigs for v6.11-rc1
m68k: Fix kernel_clone_args.flags in m68k_clone()
m68k: cmpxchg: Use swap() to improve code
Commit 734e1a8603 ("block: Prevent deadlocks when switching
elevators") introduced the function elv_iosched_load_module() to allow
loading an elevator module outside of elv_iosched_store() with the
target device queue not frozen, to avoid deadlocks. However, the "none"
scheduler does not have a module and as a result,
elv_iosched_load_module() always returns an error when trying to switch
to this valid scheduler.
Fix this by ignoring the return value of the request_module() call
done by elv_iosched_load_module(). This restores the behavior before
commit 734e1a8603, which was to ignore the request_module() result and
instead rely on elevator_change() to handle the "none" scheduler case.
Reported-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Fixes: 734e1a8603 ("block: Prevent deadlocks when switching elevators")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240917133231.134806-1-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmbm9fQeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGXcwH/A8+IXnrGv+VzYgD
+mE4hgGGHt4dClcUZ31gQetkkT6xktEVp6pB6JkFO7oEgBiTkJBbYGl6VZtsAIOd
Fi3jic8ik0uhZLFcxDJcHTceh6Pw8bkhWoh0tkF3bkDRwbppJdG7Khyk8DxTl24w
ldqh9om2cC7w9IPVx93xTgKgMMZ63qiJyUdTvxEZI3BG8F70smlgZSPskLp2Iktd
FIJZPcyKM0bhJYwZOpXK0vx5C2cA4oIW4xriHUw4aklv646OBxNKevB2JJAft2uA
6LyvuLgnYn/OpdFGZ8slvdmhm6hLWft5B1/bWKorUkz7p5YGiySFzpkMVAkNJ6mS
cRwHJNc=
=flw3
-----END PGP SIGNATURE-----
Merge tag 'v6.11' into for-6.12/block
Merge in 6.11 final to get the fix for preventing deadlocks on an
elevator switch, as there's a fixup for that patch.
* tag 'v6.11': (1788 commits)
Linux 6.11
Revert "KVM: VMX: Always honor guest PAT on CPUs that support self-snoop"
pinctrl: pinctrl-cy8c95x0: Fix regcache
cifs: Fix signature miscalculation
mm: avoid leaving partial pfn mappings around in error case
drm/xe/client: add missing bo locking in show_meminfo()
drm/xe/client: fix deadlock in show_meminfo()
drm/xe/oa: Enable Xe2+ PES disaggregation
drm/xe/display: fix compat IS_DISPLAY_STEP() range end
drm/xe: Fix access_ok check in user_fence_create
drm/xe: Fix possible UAF in guc_exec_queue_process_msg
drm/xe: Remove fence check from send_tlb_invalidation
drm/xe/gt: Remove double include
net: netfilter: move nf flowtable bpf initialization in nf_flow_table_module_init()
PCI: Fix potential deadlock in pcim_intx()
workqueue: Clear worker->pool in the worker thread context
net: tighten bad gso csum offset check in virtio_net_hdr
netlink: specs: mptcp: fix port endianness
net: dpaa: Pad packets to ETH_ZLEN
mptcp: pm: Fix uaf in __timer_delete_sync
...
For now, we can remove STACK_FRAME_NON_STANDARD(do_syscall) because
there is no objtool warning "do_syscall+0x11c: return with modified
stack frame", then there is handle_syscall() which is the previous
frame of do_syscall() in the call trace when executing the command
"echo l > /proc/sysrq-trigger".
Fixes: a0f7085f6a ("LoongArch: Add RANDOMIZE_KSTACK_OFFSET support")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
When building kernel with "make CC=clang defconfig", LLVM Assembler is
used due to LLVM_IAS=0 is not specified, then AS_HAS_THIN_ADD_SUB is not
set, thus objtool can not be built after enable it for Clang.
config AS_HAS_THIN_ADD_SUB is to check whether -mthin-add-sub option is
available to know R_LARCH_{32,64}_PCREL are supported for GNU Assembler,
there is no such an option for LLVM Assembler. The minimal version of
Clang is 18 for building LoongArch kernel, and Clang >= 17 has already
supported R_LARCH_{32,64}_PCREL, that is to say, there is no need to
depend on AS_HAS_THIN_ADD_SUB for Clang, so just set AS_HAS_THIN_ADD_SUB
as y if AS_IS_LLVM.
Fixes: 120dd4118e ("LoongArch: Only allow OBJTOOL & ORC unwinder if toolchain supports -mthin-add-sub")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
For now, it can enable objtool for Clang, just remove !CC_IS_CLANG for
HAVE_OBJTOOL in arch/loongarch/Kconfig.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
After commit a0f7085f6a ("LoongArch: Add RANDOMIZE_KSTACK_OFFSET
support"), there are three new instructions "addi.d $fp, $sp, 32",
"sub.d $sp, $sp, $t0" and "addi.d $sp, $fp, -32" for the secondary
stack in do_syscall(), then there is a objtool warning "return with
modified stack frame" and no handle_syscall() which is the previous
frame of do_syscall() in the call trace when executing the command
"echo l > /proc/sysrq-trigger".
objdump shows something like this:
0000000000000000 <do_syscall>:
0: 02ff8063 addi.d $sp, $sp, -32
4: 29c04076 st.d $fp, $sp, 16
8: 29c02077 st.d $s0, $sp, 8
c: 29c06061 st.d $ra, $sp, 24
10: 02c08076 addi.d $fp, $sp, 32
...
74: 0011b063 sub.d $sp, $sp, $t0
...
a8: 4c000181 jirl $ra, $t0, 0
...
dc: 02ff82c3 addi.d $sp, $fp, -32
e0: 28c06061 ld.d $ra, $sp, 24
e4: 28c04076 ld.d $fp, $sp, 16
e8: 28c02077 ld.d $s0, $sp, 8
ec: 02c08063 addi.d $sp, $sp, 32
f0: 4c000020 jirl $zero, $ra, 0
The instruction "sub.d $sp, $sp, $t0" changes the stack bottom and the
new stack size is a random value, in order to find the return address of
do_syscall() which is stored in the original stack frame after executing
"jirl $ra, $t0, 0", it should use fp which points to the original stack
top.
At the beginning, the thought is tended to decode the secondary stack
instruction "sub.d $sp, $sp, $t0" and set it as a label, then check this
label for the two frame pointer instructions to change the cfa base and
cfa offset during the period of secondary stack in update_cfi_state().
This is valid for GCC but invalid for Clang due to there are different
secondary stack instructions for ClangBuiltLinux on LoongArch, something
like this:
0000000000000000 <do_syscall>:
...
88: 00119064 sub.d $a0, $sp, $a0
8c: 00150083 or $sp, $a0, $zero
...
Actually, it equals to a single instruction "sub.d $sp, $sp, $a0", but
there is no proper condition to check it as a label like GCC, and so the
beginning thought is not a good way.
Essentially, there are two special frame pointer instructions which are
"addi.d $fp, $sp, imm" and "addi.d $sp, $fp, imm", the first one points
fp to the original stack top and the second one restores the original
stack bottom from fp.
Based on the above analysis, in order to avoid adding an arch-specific
update_cfi_state(), we just add a member "frame_pointer" in the "struct
symbol" as a label to avoid affecting the current normal case, then set
it as true only if there is "addi.d $sp, $fp, imm". The last is to check
this label for the two frame pointer instructions to change the cfa base
and cfa offset in update_cfi_state().
Tested with the following two configs:
(1) CONFIG_RANDOMIZE_KSTACK_OFFSET=y &&
CONFIG_RANDOMIZE_KSTACK_OFFSET_DEFAULT=n
(2) CONFIG_RANDOMIZE_KSTACK_OFFSET=y &&
CONFIG_RANDOMIZE_KSTACK_OFFSET_DEFAULT=y
By the way, there is no effect for x86 with this patch, tested on the
x86 machine with Fedora 40 system.
Cc: stable@vger.kernel.org # 6.9+
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The module param pcie_p2p should be checked for kfd p2p feature, so add it.
Fixes: 75f0efbc4b ("drm/amdgpu: Take IOMMU remapping into account for p2p checks")
Signed-off-by: Bob Zhou <bob.zhou@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The feature is not applicable to specific app platform.
v2: update the disablement condition and commit description
v3: move the setting to amdgpu_ras_check_supported
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This resolves the dereference null return value warning
reported by Coverity.
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Jesse Zhang <jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Variable hub_inst is unused.
Fixes: e28604d833 ("drm/amdkfd: Drop poison hanlding from gfx v10")
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-by: Tim Huang <tim.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We were removing the kernfs entry for queue info before checking if the
queue could be destroyed. If it failed to get destroyed (e.g. during
some GPU resets), then we would try to delete it later during pqm
teardown, but the file was already removed. This led to a kernel WARN
trying to remove size, gpuid and type. Move the remove to after the
destroy check.
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Jonathan Kim <jonathan.kim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Use the topology information of number of packages for making the
decision about TSC trust instead of using the number of online nodes
which is not reflecting the real topology.
- Stop the PIT timer 0 when its not in use as to stop pointless emulation
in the VMM.
- Fix the PIT timer stop sequence for timer 0 so it truly stops both real
hardware and buggy VMM emulations.
-----BEGIN PGP SIGNATURE-----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=1vKt
-----END PGP SIGNATURE-----
Merge tag 'x86-timers-2024-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 timer updates from Thomas Gleixner:
- Use the topology information of number of packages for making the
decision about TSC trust instead of using the number of online nodes
which is not reflecting the real topology.
- Stop the PIT timer 0 when its not in use as to stop pointless
emulation in the VMM.
- Fix the PIT timer stop sequence for timer 0 so it truly stops both
real hardware and buggy VMM emulations.
* tag 'x86-timers-2024-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/tsc: Check for sockets instead of CPUs to make code match comment
clockevents/drivers/i8253: Fix stop sequence for timer 0
x86/i8253: Disable PIT timer 0 when not in use
x86/tsc: Use topology_max_packages() to get package number
list_head can be initialized automatically with LIST_HEAD()
instead of calling INIT_LIST_HEAD().
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Tested-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20240904013344.2026738-1-ruanjinjie@huawei.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
- Rework kcpuid to handle the the autogenerated CSV file correctly and
update the CSV file to cover the whole zoo of CPUID.
- Avoid memcpy() for ia32 syscall_get_arguments() and use direct
assignments as fortified memcpy() is unhappy about writing/reading
beyond the end of the addresses destination/source struct member
- A few new PCI IDs for AMD
- Update MAINTAINERS to cover x86 specific selftests
-----BEGIN PGP SIGNATURE-----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=XVR5
-----END PGP SIGNATURE-----
Merge tag 'x86-misc-2024-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 updates from Thomas Gleixner:
- Rework kcpuid to handle the the autogenerated CSV file correctly and
update the CSV file to cover the whole zoo of CPUID.
- Avoid memcpy() for ia32 syscall_get_arguments() and use direct
assignments as fortified memcpy() is unhappy about writing/reading
beyond the end of the addresses destination/source struct member
- A few new PCI IDs for AMD
- Update MAINTAINERS to cover x86 specific selftests
* tag 'x86-misc-2024-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
MAINTAINERS: Add selftests/x86 entry
x86/amd_nb: Add new PCI IDs for AMD family 1Ah model 60h-70h
x86/syscall: Avoid memcpy() for ia32 syscall_get_arguments()
MAINTAINERS: Add x86 cpuid database entry
tools/x86/kcpuid: Introduce a complete cpuid bitfields CSV file
tools/x86/kcpuid: Parse subleaf ranges if provided
tools/x86/kcpuid: Recognize all leaves with subleaves
tools/x86/kcpuid: Strip bitfield names leading/trailing whitespace
tools/x86/kcpuid: Protect against faulty "max subleaf" values
tools/x86/kcpuid: Set max possible subleaves count to 64
tools/x86/kcpuid: Properly align long-description columns
tools/x86/kcpuid: Remove unused variable
x86/amd_nb: Add new PCI IDs for AMD family 1Ah model 60h
There is not much point in keeping support for RZ/Five peripherals
enabled, as the RZ/Five platform option (ARCH_R9A07G043) is gated behind
NONPORTABLE. Hence drop all config options that enable built-in or
modular support for peripherals found on RZ/Five SoCs.
Disable USB_XHCI_RCAR explicitly, as its value defaults to the value of
ARCH_RENESAS, which is still enabled.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/89ad70c7d6e8078208fecfd41dc03f6028531729.1722353710.git.geert+renesas@glider.be
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
-----BEGIN PGP SIGNATURE-----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=5l8m
-----END PGP SIGNATURE-----
Merge tag 'x86-platform-2024-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 platform update from Thomas Gleixner:
"Remove a stale declaration from the UV platform code"
* tag 'x86-platform-2024-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/platform/uv: Remove unused declaration uv_irq_2_mmr_info()
- Make LAM enablement safe vs. kernel threads using a process mm
temporarily as switching back to the process would not update CR3 and
therefore not enable LAM causing faults in user space when using tagged
pointers. Cure it by synchronizing LAM enablement via IPIs to all CPUs
which use the related mm.
- Cure a LAM harmless inconsistency between CR3 and the state during
context switch. It's both confusing and prone to lead to real bugs
- Handle alt stack handling for threads which run with a non-zero
protection key. The non-zero key prevents the kernel to access the
alternate stack. Cure it by temporarily enabling all protection keys for
the alternate stack setup/restore operations.
- Provide a EFI config table identity mapping for kexec kernel to prevent
kexec fails because the new kernel cannot access the config table array
- Use GB pages only when a full GB is mapped in the identity map as
otherwise the CPU can speculate into reserved areas after the end of
memory which causes malfunction on UV systems.
- Remove the noisy and pointless SRAT table dump during boot
- Use is_ioremap_addr() for iounmap() address range checks instead of
high_memory. is_ioremap_addr() is more precise.
-----BEGIN PGP SIGNATURE-----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=VZcR
-----END PGP SIGNATURE-----
Merge tag 'x86-mm-2024-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 memory management updates from Thomas Gleixner:
- Make LAM enablement safe vs. kernel threads using a process mm
temporarily as switching back to the process would not update CR3 and
therefore not enable LAM causing faults in user space when using
tagged pointers. Cure it by synchronizing LAM enablement via IPIs to
all CPUs which use the related mm.
- Cure a LAM harmless inconsistency between CR3 and the state during
context switch. It's both confusing and prone to lead to real bugs
- Handle alt stack handling for threads which run with a non-zero
protection key. The non-zero key prevents the kernel to access the
alternate stack. Cure it by temporarily enabling all protection keys
for the alternate stack setup/restore operations.
- Provide a EFI config table identity mapping for kexec kernel to
prevent kexec fails because the new kernel cannot access the config
table array
- Use GB pages only when a full GB is mapped in the identity map as
otherwise the CPU can speculate into reserved areas after the end of
memory which causes malfunction on UV systems.
- Remove the noisy and pointless SRAT table dump during boot
- Use is_ioremap_addr() for iounmap() address range checks instead of
high_memory. is_ioremap_addr() is more precise.
* tag 'x86-mm-2024-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/ioremap: Improve iounmap() address range checks
x86/mm: Remove duplicate check from build_cr3()
x86/mm: Remove unused NX related declarations
x86/mm: Remove unused CR3_HW_ASID_BITS
x86/mm: Don't print out SRAT table information
x86/mm/ident_map: Use gbpages only where full GB page should be mapped.
x86/kexec: Add EFI config table identity mapping for kexec kernel
selftests/mm: Add new testcases for pkeys
x86/pkeys: Restore altstack access in sigreturn()
x86/pkeys: Update PKRU to enable all pkeys before XSAVE
x86/pkeys: Add helper functions to update PKRU on the sigframe
x86/pkeys: Add PKRU as a parameter in signal handling functions
x86/mm: Cleanup prctl_enable_tagged_addr() nr_bits error checking
x86/mm: Fix LAM inconsistency during context switch
x86/mm: Use IPIs to synchronize LAM enablement
- Enable FRED right after init_mem_mapping() because at that point the
early IDT fault handler is replaced by the real fault handler. The real
fault handler retrieves the faulting address from the stack frame and
not from CR2 when the FRED feature is set. But that obviously only
works when FRED is enabled in the CPU as well.
- Set SS to __KERNEL_DS when enabling FRED to prevent a corner case where
ERETS can observe a SS mismatch and raises a #GP.
-----BEGIN PGP SIGNATURE-----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=cKRu
-----END PGP SIGNATURE-----
Merge tag 'x86-fred-2024-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 FRED updates from Thomas Gleixner:
- Enable FRED right after init_mem_mapping() because at that point the
early IDT fault handler is replaced by the real fault handler. The
real fault handler retrieves the faulting address from the stack
frame and not from CR2 when the FRED feature is set. But that
obviously only works when FRED is enabled in the CPU as well.
- Set SS to __KERNEL_DS when enabling FRED to prevent a corner case
where ERETS can observe a SS mismatch and raises a #GP.
* tag 'x86-fred-2024-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/entry: Set FRED RSP0 on return to userspace instead of context switch
x86/msr: Switch between WRMSRNS and WRMSR with the alternatives mechanism
x86/entry: Test ti_work for zero before processing individual bits
x86/fred: Set SS to __KERNEL_DS when enabling FRED
x86/fred: Enable FRED right after init_mem_mapping()
x86/fred: Move FRED RSP initialization into a separate function
x86/fred: Parse cmdline param "fred=" in cpu_parse_early_param()
Until now, the generic weak kgdb_roundup_cpus() has been used for kgdb on
RISCV. A custom one allows to debug CPUs that are stuck with interrupts
disabled with NMI support in the future. And using an IPI is better than
the generic one since it avoids the potential situation described in the
generic kgdb_call_nmi_hook(). As Andrew pointed out, once there is NMI
support, we can easily extend this and the CPU backtrace support
to use NMIs.
After this patch, the kgdb test show that:
# echo g > /proc/sysrq-trigger
[2]kdb> btc
btc: cpu status: Currently on cpu 2
Available cpus: 0-1(-), 2, 3(-)
Stack traceback for pid 0
0xffffffff81c13a40 0 0 1 0 - 0xffffffff81c14510 swapper/0
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.10.0-g3120273055b6-dirty #51
Hardware name: riscv-virtio,qemu (DT)
Call Trace:
[<ffffffff80006c48>] dump_backtrace+0x28/0x30
[<ffffffff80fceb38>] show_stack+0x38/0x44
[<ffffffff80fe6a04>] dump_stack_lvl+0x58/0x7a
[<ffffffff80fe6a3e>] dump_stack+0x18/0x20
[<ffffffff801143fa>] kgdb_cpu_enter+0x682/0x6b2
[<ffffffff801144ca>] kgdb_nmicallback+0xa0/0xac
[<ffffffff8000a392>] handle_IPI+0x9c/0x120
[<ffffffff800a2baa>] handle_percpu_devid_irq+0xa4/0x1e4
[<ffffffff8009cca8>] generic_handle_domain_irq+0x28/0x36
[<ffffffff800a9e5c>] ipi_mux_process+0xe8/0x110
[<ffffffff806e1e30>] imsic_handle_irq+0xf8/0x13a
[<ffffffff8009cca8>] generic_handle_domain_irq+0x28/0x36
[<ffffffff806dff12>] riscv_intc_aia_irq+0x2e/0x40
[<ffffffff80fe6ab0>] handle_riscv_irq+0x54/0x86
[<ffffffff80ff2e4a>] call_on_irq_stack+0x32/0x40
Rebased on Ryo Takakura's "RISC-V: Enable IPI CPU Backtrace" patch.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20240727063438.886155-1-ruanjinjie@huawei.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Debuggers have guess the FPU buffer layout in core dumps, which is error
prone. This is because AMD and Intel layouts differ.
To avoid buggy heuristics add a ELF section which describes the buffer
layout which can be retrieved by tools.
-----BEGIN PGP SIGNATURE-----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=Vqqo
-----END PGP SIGNATURE-----
Merge tag 'x86-fpu-2024-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fpu updates from Thomas Gleixner:
"Provide FPU buffer layout in core dumps:
Debuggers have guess the FPU buffer layout in core dumps, which is
error prone. This is because AMD and Intel layouts differ.
To avoid buggy heuristics add a ELF section which describes the buffer
layout which can be retrieved by tools"
* tag 'x86-fpu-2024-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/elf: Add a new FPU buffer layout info to x86 core files
The 'ld' and 'std' instructions require a 4-byte aligned displacement
because they are DS-form instructions. But the "m" asm constraint
doesn't enforce that.
That can lead to build errors if the compiler chooses a non-aligned
displacement, as seen with GCC 14:
/tmp/ccuSzwiR.s: Assembler messages:
/tmp/ccuSzwiR.s:2579: Error: operand out of domain (39 is not a multiple of 4)
make[5]: *** [scripts/Makefile.build:229: net/core/page_pool.o] Error 1
Dumping the generated assembler shows:
ld 8,39(8) # MEM[(const struct atomic64_t *)_29].counter, t
Use the YZ constraints to tell the compiler either to generate a DS-form
displacement, or use an X-form instruction, either of which prevents the
build error.
See commit 2d43cc701b ("powerpc/uaccess: Fix build errors seen with
GCC 13/14") for more details on the constraint letters.
Fixes: 9f0cbea0d8 ("[POWERPC] Implement atomic{, 64}_{read, write}() without volatile")
Cc: stable@vger.kernel.org # v2.6.24+
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/all/20240913125302.0a06b4c7@canb.auug.org.au
Tested-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240916120510.2017749-1-mpe@ellerman.id.au
Maddy will be helping out with upstream maintenance, add him as a
reviewer.
Acked-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240827063651.28985-1-mpe@ellerman.id.au
To ensure code clarity and prevent potential errors, it's advisable
to employ the ';' as a statement separator, except when ',' are
intentionally used for specific purposes.
Signed-off-by: Shen Lichuan <shenlichuan@vivo.com>
Reviewed-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Link: https://lore.kernel.org/r/20240910070058.40867-1-shenlichuan@vivo.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Add the missing `MODULE_LICENSE()` tag to the `rzv2h_wdt` driver, which
resolves the following modpost error when built as a module:
ERROR: modpost: missing MODULE_LICENSE() in drivers/watchdog/rzv2h_wdt.o
Fixes: f6febd0a30 ("watchdog: Add Watchdog Timer driver for RZ/V2H(P)")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240911132031.544479-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Add device tree bindings for the Cirrus Logic EP93xx watchdog block
used in these SoCs.
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240909-ep93xx-v12-10-e86ab2423d4b@maquefel.me
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
The watchdog IP can generate pre-timeout interrupt and can be used as
a wake up source. Document both properties.
Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240705115052.116705-1-marex@denx.de
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
metadata encodeded into UD1.
-----BEGIN PGP SIGNATURE-----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=Z5Hg
-----END PGP SIGNATURE-----
Merge tag 'x86-core-2024-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 core update from Thomas Gleixner:
"Enable UBSAN traps for x86, which provides better reporting through
metadata encodeded into UD1"
* tag 'x86-core-2024-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/traps: Enable UBSAN traps on x86
- Handle an allocation failure in the IO/APIC code gracefully instead of
crashing the machine.
- Remove support for APIC local destination mode on 64bit
Logical destination mode of the local APIC is used for systems with up
to 8 CPUs. It has an advantage over physical destination mode as it
allows to target multiple CPUs at once with IPIs. That advantage was
definitely worth it when systems with up to 8 CPUs were state of the
art for servers and workstations, but that's history.
In the recent past there were quite some reports of new laptops failing
to boot with logical destination mode, but they work fine with physical
destination mode. That's not a suprise because physical destination
mode is guaranteed to work as it's the only way to get a CPU up and
running via the INIT/INIT/STARTUP sequence. Some of the affected
systems were cured by BIOS updates, but not all OEMs provide them.
As the number of CPUs keep increasing, logical destination mode becomes
less used and the benefit for small systems, like laptops, is not
really worth the trouble. So just remove logical destination mode
support for 64bit and be done with it.
- Code and comment cleanups in the APIC area.
-----BEGIN PGP SIGNATURE-----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=Y3a/
-----END PGP SIGNATURE-----
Merge tag 'x86-apic-2024-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 APIC updates from Thomas Gleixner:
- Handle an allocation failure in the IO/APIC code gracefully instead
of crashing the machine.
- Remove support for APIC local destination mode on 64bit
Logical destination mode of the local APIC is used for systems with
up to 8 CPUs. It has an advantage over physical destination mode as
it allows to target multiple CPUs at once with IPIs. That advantage
was definitely worth it when systems with up to 8 CPUs were state of
the art for servers and workstations, but that's history.
In the recent past there were quite some reports of new laptops
failing to boot with logical destination mode, but they work fine
with physical destination mode. That's not a suprise because physical
destination mode is guaranteed to work as it's the only way to get a
CPU up and running via the INIT/INIT/STARTUP sequence. Some of the
affected systems were cured by BIOS updates, but not all OEMs provide
them.
As the number of CPUs keep increasing, logical destination mode
becomes less used and the benefit for small systems, like laptops, is
not really worth the trouble. So just remove logical destination mode
support for 64bit and be done with it.
- Code and comment cleanups in the APIC area.
* tag 'x86-apic-2024-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/irq: Fix comment on IRQ vector layout
x86/apic: Remove unused extern declarations
x86/apic: Remove logical destination mode for 64-bit
x86/apic: Remove unused inline function apic_set_eoi_cb()
x86/ioapic: Cleanup remaining coding style issues
x86/ioapic: Cleanup line breaks
x86/ioapic: Cleanup bracket usage
x86/ioapic: Cleanup comments
x86/ioapic: Move replace_pin_at_irq_node() to the call site
iommu/vt-d: Cleanup apic_printk()
x86/mpparse: Cleanup apic_printk()s
x86/ioapic: Cleanup guarded debug printk()s
x86/ioapic: Cleanup apic_printk()s
x86/apic: Cleanup apic_printk()s
x86/apic: Provide apic_printk() helpers
x86/ioapic: Use guard() for locking where applicable
x86/ioapic: Cleanup structs
x86/ioapic: Mark mp_alloc_timer_irq() __init
x86/ioapic: Handle allocation failures gracefully
- Use memremap() for the EISA probe instrad of ioremap(). EISA is
strictly memory and not MMIO
- Cleanups and enhancement all over the place
-----BEGIN PGP SIGNATURE-----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=aN01
-----END PGP SIGNATURE-----
Merge tag 'x86-cleanups-2024-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cleanups from Thomas Gleixner:
"A set of cleanups across x86:
- Use memremap() for the EISA probe instead of ioremap(). EISA is
strictly memory and not MMIO
- Cleanups and enhancement all over the place"
* tag 'x86-cleanups-2024-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/EISA: Dereference memory directly instead of using readl()
x86/extable: Remove unused declaration fixup_bug()
x86/boot/64: Strip percpu address space when setting up GDT descriptors
x86/cpu: Clarify the error message when BIOS does not support SGX
x86/kexec: Add comments around swap_pages() assembly to improve readability
x86/kexec: Fix a comment of swap_pages() assembly
x86/sgx: Fix a W=1 build warning in function comment
x86/EISA: Use memremap() to probe for the EISA BIOS signature
x86/mtrr: Remove obsolete declaration for mtrr_bp_restore()
x86/cpu_entry_area: Annotate percpu_setup_exception_stacks() as __init
Commit 5f1cda5110 ("platform/x86: intel_scu_wdt: Move intel_scu_wdt.h to
x86 subfolder") moves intel-mid_wdt.h in ./include/linux/platform_data into
the x86 subdirectory, but misses to adjust the INTEL MID PLATFORM section,
which is referring to this file.
Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a
broken reference.
Adjust the file entry to this header file movement.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Link: https://lore.kernel.org/r/20240917103955.102921-1-lukas.bulwahn@redhat.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
- Prevent spurious KCOV coverage in common_interrupt()
- Fixup the KCOV Makefile directive which got stale due to a source file
rename
- Exclude stack unwinding from KCOV as it creates large amounts of
uninteresting coverage
- Provide a self test to validate that KCOV coverage of the interrupt
handling code starts not before preempt count got updated.
-----BEGIN PGP SIGNATURE-----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=tiXT
-----END PGP SIGNATURE-----
Merge tag 'x86-build-2024-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 build updates from Thomas Gleixner:
"Updates for KCOV instrumentation on x86:
- Prevent spurious KCOV coverage in common_interrupt()
- Fixup the KCOV Makefile directive which got stale due to a source
file rename
- Exclude stack unwinding from KCOV as it creates large amounts of
uninteresting coverage
- Provide a self test to validate that KCOV coverage of the interrupt
handling code starts not before preempt count got updated"
* tag 'x86-build-2024-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86: Ignore stack unwinding in KCOV
module: Fix KCOV-ignored file name
kcov: Add interrupt handling self test
x86/entry: Remove unwanted instrumentation in common_interrupt()
Most of these updates are for removing dead code on the Samsung S3C,
NXP i.MX, TI OMAP and TI DaVinci platforms, though this appears to be
a coincidence. There are also cleanups for the Marvell Orion family and
the Arm integrator series and a Kconfig change for Broadcom.
-----BEGIN PGP SIGNATURE-----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=3AQ6
-----END PGP SIGNATURE-----
Merge tag 'soc-arm-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC ARM platform updates from Arnd Bergmann:
"Most of these updates are for removing dead code on the Samsung S3C,
NXP i.MX, TI OMAP and TI DaVinci platforms, though this appears to be
a coincidence.
There are also cleanups for the Marvell Orion family and the Arm
integrator series and a Kconfig change for Broadcom"
* tag 'soc-arm-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: dove: Drop a write-only variable
ARM: orion5x: Switch to new sys-off handler API
ARM: mvebu: Warn about memory chunks too small for DDR training
ARM: imx: Annotate imx7d_enet_init() as __init
ARM: OMAP1: Remove unused declarations in arch/arm/mach-omap1/pm.h
ARM: s3c: remove unused s3c2410_cpu_suspend() declaration
ARM: s3c: remove unused declarations for s3c6400
ARM: s3c: Remove unused s3c_init_uart_irqs() declaration
ARM: davinci: remove unused cpuidle code
ARM: davinci: remove unused davinci_init_ide() declaration
ARM: davinci: remove unused davinci_cfg_reg_list() declaration
ARM: mach-imx: imx6sx: Remove Ethernet refclock setting
MAINTAINERS: Add entry for Samsung Exynos850 SoC
ARM: bcm: Select ARM_GIC_V3 for ARCH_BRCMSTB
ARM: omap2: Switch to use kmemdup_array()
ARM: omap1: Remove unused struct 'dma_link_info'
ARM: s3c: Drop explicit initialization of struct i2c_device_id::driver_data to 0
It is really time.
riscv has all the required architecture related changes, that have been
identified over time, in order to enable PREEMPT_RT. With the recent
printk changes, the last known road block has been addressed.
Allow to enable PREEMPT_RT on riscv.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nam Cao <namcao@linutronix.de> # Visionfive 2
Link: https://lore.kernel.org/all/20240906111841.562402-4-bigeasy@linutronix.de
It is really time.
arm64 has all the required architecture related changes, that have been
identified over time, in order to enable PREEMPT_RT. With the recent
printk changes, the last known road block has been addressed.
Allow to enable PREEMPT_RT on arm64.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/all/20240906111841.562402-3-bigeasy@linutronix.de
It is really time.
x86 has all the required architecture related changes, that have been
identified over time, in order to enable PREEMPT_RT. With the recent
printk changes, the last known road block has been addressed.
Allow to enable PREEMPT_RT on x86.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240906111841.562402-2-bigeasy@linutronix.de
The updates to the defconfig files are fairly small, enabling
drivers for eight of the arm and riscv based platforms.
-----BEGIN PGP SIGNATURE-----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=A/M4
-----END PGP SIGNATURE-----
Merge tag 'soc-defconfig-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC defconfig updates from Arnd Bergmann:
"The updates to the defconfig files are fairly small, enabling drivers
for eight of the arm and riscv based platforms"
* tag 'soc-defconfig-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: defconfig: enable mt8365 sound
riscv: defconfig: Enable pinctrl support for CV18XX Series SoC
arm64: defconfig: Enable ADP5585 GPIO and PWM drivers
arm64: defconfig: Enable Tegra194 PCIe Endpoint
arm64: defconfig: Enable E5010 JPEG Encoder
riscv: defconfig: sophgo: enable clks for sg2042
arm64: defconfig: build CONFIG_REGULATOR_QCOM_REFGEN as module
ARM: configs: at91: enable config flags for sam9x7 SoC family
arm64: defconfig: Enable R-Car Ethernet-TSN support
ARM: shmobile: defconfig: Enable slab hardening and kmalloc buckets
arm64: defconfig: Enable AK4619 codec support
The driver updates seem larger this time around, with changes
is many of the SoC specific drivers, both the custom drivers/soc
ones and the closely related subsystems (memory, bus, firmware,
reset, ...).
The at91 platform gains support for sam9x7 chips in the soc and
power management code. This is the latest variant of one of the
oldest still supported SoC families, using the ARM9 (ARMv5) core.
As usual, the qualcomm snapdragon platform gets a ton of updates in many
of their drivers to add more features and additional SoC support. Most
of these are somewhat firmware related as the platform has a number of
firmware based interfaces to the kernel. A notable addition here is the
inclusion of trace events to two of these drivers.
Herve Codina and Christophe Leroy are now sending updates for
drivers/soc/fsl/ code through the SoC tree, this contains both PowerPC
and Arm specific platforms and has previously been problematic to
maintain. The first update here contains support for newer PowerPC
variants and some cleanups.
The turris mox firmware driver has a number of updates, mostly cleanups.
The Arm SCMI firmware driver gets a major rework to modularize
the existing code into separately loadable drivers for the various
transports, the addition of custom NXP i.MX9 interfaces and a
number of smaller updates.
The Arm FF-A firmware driver gets a feature update to support
the v1.2 version of the specification.
The reset controller drivers have some smaller cleanups and a newly
added driver for the Intel/Mobileye EyeQ5/EyeQ6 MIPS SoCs.
The memory controller drivers get some cleanups and refactoring
for Tegra, TI, Freescale/NXP and a couple more platforms.
Finally there are lots of minor updates to firmware (raspberry pi,
tegra, imx), bus (sunxi, omap, tegra) and soc (rockchips, tegra, amlogic,
mediatek) drivers and their DT bindings.
-----BEGIN PGP SIGNATURE-----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=EauF
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"The driver updates seem larger this time around, with changes is many
of the SoC specific drivers, both the custom drivers/soc ones and the
closely related subsystems (memory, bus, firmware, reset, ...).
The at91 platform gains support for sam9x7 chips in the soc and power
management code. This is the latest variant of one of the oldest still
supported SoC families, using the ARM9 (ARMv5) core.
As usual, the qualcomm snapdragon platform gets a ton of updates in
many of their drivers to add more features and additional SoC support.
Most of these are somewhat firmware related as the platform has a
number of firmware based interfaces to the kernel. A notable addition
here is the inclusion of trace events to two of these drivers.
Herve Codina and Christophe Leroy are now sending updates for
drivers/soc/fsl/ code through the SoC tree, this contains both PowerPC
and Arm specific platforms and has previously been problematic to
maintain. The first update here contains support for newer PowerPC
variants and some cleanups.
The turris mox firmware driver has a number of updates, mostly
cleanups.
The Arm SCMI firmware driver gets a major rework to modularize the
existing code into separately loadable drivers for the various
transports, the addition of custom NXP i.MX9 interfaces and a number
of smaller updates.
The Arm FF-A firmware driver gets a feature update to support the v1.2
version of the specification.
The reset controller drivers have some smaller cleanups and a newly
added driver for the Intel/Mobileye EyeQ5/EyeQ6 MIPS SoCs.
The memory controller drivers get some cleanups and refactoring for
Tegra, TI, Freescale/NXP and a couple more platforms.
Finally there are lots of minor updates to firmware (raspberry pi,
tegra, imx), bus (sunxi, omap, tegra) and soc (rockchips, tegra,
amlogic, mediatek) drivers and their DT bindings"
* tag 'soc-drivers-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (212 commits)
firmware: imx: remove duplicate scmi_imx_misc_ctrl_get()
platform: cznic: turris-omnia-mcu: Fix error check in omnia_mcu_register_trng()
bus: sunxi-rsb: Simplify code with dev_err_probe()
soc: fsl: qe: ucc: Export ucc_mux_set_grant_tsa_bkpt
soc: fsl: cpm1: qmc: Fix dependency on fsl_soc.h
dt-bindings: arm: rockchip: Add rk3576 compatible string to pmu.yaml
soc: fsl: qbman: Remove redundant warnings
soc: fsl: qbman: Use iommu_paging_domain_alloc()
MAINTAINERS: Add QE files related to the Freescale QMC controller
soc: fsl: cpm1: qmc: Handle QUICC Engine (QE) soft-qmc firmware
soc: fsl: cpm1: qmc: Add support for QUICC Engine (QE) implementation
soc: fsl: qe: Add missing PUSHSCHED command
soc: fsl: qe: Add resource-managed muram allocators
soc: fsl: cpm1: qmc: Introduce qmc_version
soc: fsl: cpm1: qmc: Rename SCC_GSMRL_MODE_QMC
soc: fsl: cpm1: qmc: Handle RPACK initialization
soc: fsl: cpm1: qmc: Rename qmc_chan_command()
soc: fsl: cpm1: qmc: Introduce qmc_{init,exit}_xcc() and their CPM1 version
soc: fsl: cpm1: qmc: Introduce qmc_init_resource() and its CPM1 version
soc: fsl: cpm1: qmc: Re-order probe() operations
...
New SoC support for Broadcom bcm2712 (Raspberry Pi 5) and Renesas
R9A09G057 (RZ/V2H(P)) and Qualcomm Snapdragon 414 (MSM8929), all three
of these are variants of already supported chips, in particular the last
one is almost identical to MSM8939.
Lots of updates to Mediatek, ASpeed, Rockchips, Amlogic, Qualcomm,
STM32, NXP i.MX, Sophgo, TI K3, Renesas, Microchip at91, NVIDIA Tegra,
and T-HEAD.
The added Qualcomm platform support once again dominates the changes,
with seven phones and three laptops getting added in addition to
many new features on existing machines. The Snapdragon X1E support
specifically keeps improving.
The other new machines are:
- eight new machines using various 64-bit Rockchips SoCs, both
on the consumer/gaming side and developer boards
- three industrial boards with 64-bit i.MX, which is a very
low number for them.
- four more servers using a 32-bit Speed BMC
- three boards using STM32MP1 SoCs
- one new machine each using allwinner, amlogic, broadcom
and renesas chips.
-----BEGIN PGP SIGNATURE-----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=r07W
-----END PGP SIGNATURE-----
Merge tag 'soc-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC devicetree updates from Arnd Bergmann:
"New SoC support for Broadcom bcm2712 (Raspberry Pi 5) and Renesas
R9A09G057 (RZ/V2H(P)) and Qualcomm Snapdragon 414 (MSM8929), all three
of these are variants of already supported chips, in particular the
last one is almost identical to MSM8939.
Lots of updates to Mediatek, ASpeed, Rockchips, Amlogic, Qualcomm,
STM32, NXP i.MX, Sophgo, TI K3, Renesas, Microchip at91, NVIDIA Tegra,
and T-HEAD.
The added Qualcomm platform support once again dominates the changes,
with seven phones and three laptops getting added in addition to many
new features on existing machines. The Snapdragon X1E support
specifically keeps improving.
The other new machines are:
- eight new machines using various 64-bit Rockchips SoCs, both on the
consumer/gaming side and developer boards
- three industrial boards with 64-bit i.MX, which is a very low
number for them.
- four more servers using a 32-bit Speed BMC
- three boards using STM32MP1 SoCs
- one new machine each using allwinner, amlogic, broadcom and renesas
chips"
* tag 'soc-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (672 commits)
arm64: dts: allwinner: h5: NanoPi NEO Plus2: Use regulators for pio
arm64: dts: mediatek: add audio support for mt8365-evk
arm64: dts: mediatek: add afe support for mt8365 SoC
arm64: dts: mediatek: mt8186-corsola: Disable DPI display interface
arm64: dts: mediatek: mt8186: Add svs node
arm64: dts: mediatek: mt8186: Add power domain for DPI
arm64: dts: mediatek: mt8195: Correct clock order for dp_intf*
arm64: dts: mt8183: add dpi node to mt8183
arm64: dts: allwinner: h5: NanoPi Neo Plus2: Fix regulators
arm64: dts: rockchip: add CAN0 and CAN1 interfaces to mecsbc board
arm64: dts: rockchip: add CAN-FD controller nodes to rk3568
arm64: dts: nuvoton: ma35d1: Add uart pinctrl settings
arm64: dts: nuvoton: ma35d1: Add pinctrl and gpio nodes
arm64: dts: nuvoton: Add syscon to the system-management node
ARM: dts: Fix undocumented LM75 compatible nodes
arm64: dts: toshiba: Fix pl011 and pl022 clocks
ARM: dts: stm32: Use SAI to generate bit and frame clock on STM32MP15xx DHCOM PDK2
ARM: dts: stm32: Switch bitclock/frame-master to flag on STM32MP15xx DHCOM PDK2
ARM: dts: stm32: Sort properties in audio endpoints on STM32MP15xx DHCOM PDK2
ARM: dts: stm32: Add MECIO1 and MECT1S board variants
...
This is quite a quiet release for sPI. The one new core feature here is
support for configuring the state of the MOSI pin when the bus is idle,
there are some devices which are very fragile in this regard even when
the chip select signal is not asserted. Otherwise we have some new
driver support, a bunch of small fixes and some general cleanup work.
- Support for configuring the state of the MOSI pin when the the bus is
idle.
- Add the Elgin JG0309-01 in spidev.
- Support for Marvell xSPI, Mediatek MTK7981, Microchip PIC64GX,
NXP i.MX8ULP, and Rockchip RK3576 controllers.
I also accidentally pulled in an IIO DT bindings update due to a typo
when applying the MOSI idle state patches.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmbnaTcACgkQJNaLcl1U
h9BsXwf/bqArB1QiWT1t34WMKcowO6r0eCjRNSrpqcsOIprUa/0OYxXqsPJzigKV
g9HF0w2uh15NByTv+KulH4r0QPa9JOeFHFx31+bec8PFdJoUwcNjWNUi7EaQgOLp
/XzdahLhPhiBIraCts2JdRD8+4C9JlU0VeRdDRFMjl5+SB8Fjqx6mQ/rw68fEZGG
YvUTIVNT2h00W6aMKmKN0rni5ny2qNIDm6sVj/dWSWbQCPcYjVG3kxI2dmlKIm3S
ccKp4JHoOYpu9egp+t134bi/iLfOwP+vsmqWPqoI7J1cx78E9gH3QBf02KmTDbux
m/02FtCFDh5hyXke9yn/QIZvO2bKzA==
=UtQA
-----END PGP SIGNATURE-----
Merge tag 'spi-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"This is quite a quiet release for SPI. The one new core feature here
is support for configuring the state of the MOSI pin when the bus is
idle, there are some devices which are very fragile in this regard
even when the chip select signal is not asserted. Otherwise we have
some new driver support, a bunch of small fixes and some general
cleanup work.
- Support for configuring the state of the MOSI pin when the the bus
is idle
- Add the Elgin JG0309-01 in spidev
- Support for Marvell xSPI, Mediatek MTK7981, Microchip PIC64GX, NXP
i.MX8ULP, and Rockchip RK3576 controllers
I also accidentally pulled in an IIO DT bindings update due to a typo
when applying the MOSI idle state patches"
* tag 'spi-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (65 commits)
spi: geni-qcom: Use devm functions to simplify code
spi: remove spi_controller_is_slave() and spi_slave_abort()
platform/olpc: olpc-xo175-ec: switch to use spi_target_abort().
spi: slave-mt27xx: switch to use target_abort
spi: spidev: switch to use spi_target_abort()
spi: slave-system-control: switch to use spi_target_abort()
spi: slave-time: switch to use spi_target_abort()
spi: switch to use spi_controller_is_target()
spi: fspi: add support for imx8ulp
spi: fspi: involve lut_num for struct nxp_fspi_devtype_data
dt-bindings: spi: nxp-fspi: add imx8ulp support
spi: spidev_fdx: Fix the wrong format specifier
spi: mxs: Switch to RUNTIME/SYSTEM_SLEEP_PM_OPS()
spi: dt-bindings: Add rockchip,rk3576-spi compatible
spi: Revert "spi: Insert the missing pci_dev_put()before return"
spi: zynq-qspi: Replace kzalloc with kmalloc for buffer allocation
spi: ppc4xx: Sort headers
spi: ppc4xx: Revert "handle irq_of_parse_and_map() errors"
spi: zynqmp-gqspi: Simplify with dev_err_probe()
spi: zynqmp-gqspi: Use devm_spi_alloc_host()
...
This release is almost all cleanup work of various kinds, while the
diffstat for the core is quite large this is almost all cleanups and
documentation improvments with some small fixes rather than any new
feature work. We do have support for a couple of new devices but these
are small additions to existing drivers rather than new drivers.
- Removal of the SM5703 driver which does not have it's dependencies
available.
- Support for Allwinner AXP717, and Qualcomm WCN6855.
The Allwinner support shares some commits with the MFD tree.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmbnbPcACgkQJNaLcl1U
h9A70Qf/WeKVZYH6j988LWOZBYrRGIEe9ljihzbG2sEwoNN0Bm/gbxda2IT0vGRA
GDcXQXuOJBaeodFXrZ3LS4jUKFH4PthqzqNcN/x7yb7RKXUEL4OAObe6TOwLGIQz
z775UHOwq4nlkx4w9UYJBnePd42xK5WHfYUW/kpOVcBhbFUjkHiP8G2ckIRjGnq7
dHoTj5hN5ETIRrsi/oapSqKb6qbFvOfzgYtRkVWI+i2XGxXnTrSQ3dZNwLk18O1f
++5zIY5p88MARt7avAY2/iATvbr1mq9YBzFFPVcVlEg7AntFPE7iHNMwhdNI/H+3
U3OF6svvpE7lwmgQRwT1VvyZ5RC3ag==
=EvBu
-----END PGP SIGNATURE-----
Merge tag 'regulator-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"This release is almost all cleanup work of various kinds, while the
diffstat for the core is quite large this is almost all cleanups and
documentation improvments with some small fixes rather than any new
feature work. We do have support for a couple of new devices but these
are small additions to existing drivers rather than new drivers.
- Removal of the SM5703 driver which does not have it's dependencies
available.
- Support for Allwinner AXP717, and Qualcomm WCN6855.
The Allwinner support shares some commits with the MFD tree"
* tag 'regulator-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (66 commits)
regulator: sm5703: Remove because it is unused and fails to build
regulator: Split up _regulator_get()
regulator: update some comments ([gs]et_voltage_vsel vs [gs]et_voltage_sel)
regulator: max8973: Use irq_get_trigger_type() helper
regulator: core: fix the broken behavior of regulator_dev_lookup()
regulator: max77650: Use container_of and constify static data
regulator: hi6421v530: Use container_of and constify static data
regulator: hi6421v530: Drop unused 'eco_microamp'
regulator: qcom-refgen: Constify static data
regulator: pfuze100: Constify static data
regulator: pcap: Constify static data
regulator: mtk-dvfsrc: Constify static data
regulator: max77826: Constify static data
regulator: max77826: Drop unused 'rdesc' in 'struct max77826_regulator_info'
regulator: tps65023: Constify static data
regulator: hi6421v600: Constify static data
regulator: hi6421: Constify static data
regulator: da9121: Constify static data
regulator: da9063: Constify static data
regulator: da9055: Constify static data
...
The main update here is Matti's work allowing regmap irqdomains to be
given custom names (allowing multiple interrupt controllers associatd
with a single struct device), this pulls in some commits from Thomas'
tree which it depends on. Otherwise there's a bit of work on improving
handling of regmaps protected with spinlocks when used with complex
cache types, fixing some valid but harmless lockdep reports seen with
some new driver work.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmbnZjcACgkQJNaLcl1U
h9CFMwf/ecsvvRV4LycfWvm3yehorg+ruV8TXFB/KswXZ957rWfxOYBrSdOoNezy
nYb2LZAKWlS10Akk5CinBc/ZjRH1EQmjWCl/l2eKe1gTFQ9xPFGWNg7FlnmRRNKR
9SiBdSCjxXS55nZN7t4jeXCXUr8iaezV+K55rKdznpe/EOi19wHmNtR2+3PqtnuJ
felae4Xrq3o+O20yV54KYq1iQNY2jNNFGZUGBYAzQjR8aCuY9lQATT36uTxqspWY
icZwUiLCmmoRLTC+QbSnmjv26s/uURpRXR7BUhX40PaK6MuWzNHAjxUo8iYVzuVg
Nmqw+5yeDF4tY9pDODrmqxK2fErObw==
=TyFs
-----END PGP SIGNATURE-----
Merge tag 'regmap-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown:
"The main update here is Matti's work allowing regmap irqdomains to be
given custom names (allowing multiple interrupt controllers associatd
with a single struct device), this pulls in some commits from Thomas'
tree which it depends on.
Otherwise there's a bit of work on improving handling of regmaps
protected with spinlocks when used with complex cache types, fixing
some valid but harmless lockdep reports seen with some new driver
work"
* tag 'regmap-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: kunit: Add coverage of spinlocked regmaps
regcache: use map->alloc_flags also for allocating cache
regmap: Use locking during kunit tests
regmap: Hold the regmap lock when allocating and freeing the cache
regmap: Allow setting IRQ domain name suffix
Increase the test coverage of list_test_list_replace*() by adding the
checks to compare the pointer of "a_new.next" and "a_new.prev" to make
sure a perfect circular doubly linked list is formed after the
replacement.
Link: https://lkml.kernel.org/r/20240910040818.65723-1-richard120310@gmail.com
Signed-off-by: I Hsin Cheng <richard120310@gmail.com>
Cc: David Gow <davidgow@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Fix test for list_cut_position*() for the missing check of integer "i"
after the second loop. The variable should be checked for second time to
make sure both lists after the cut operation are formed as expected.
Link: https://lkml.kernel.org/r/20240910043531.71343-1-richard120310@gmail.com
Signed-off-by: I Hsin Cheng <richard120310@gmail.com>
Cc: David Gow <davidgow@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Switch away from quite chatty declarations using typeof_member().
In theory this is faster to compile too because there is no macro
expansion and there is less type checking.
Link: https://lkml.kernel.org/r/81bf02fd-8724-4f4d-a2bb-c59620b7d716@p183
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
