Jisheng Zhang <jszhang@kernel.org> says:
commit 76329c6939 ("riscv: Use SYM_*() assembly macros instead
of deprecated ones"), most riscv has been to converted the new style
SYM_ assembler annotations. The remaining one is sifive's
errata_cip_453.S, so convert to new style SYM_ annotations as well.
After that select ARCH_USE_SYM_ANNOTATIONS.
* b4-shazam-merge:
riscv: select ARCH_USE_SYM_ANNOTATIONS
riscv: errata: sifive: Use SYM_*() assembly macros
Link: https://lore.kernel.org/r/20240709160536.3690-1-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The macro CONFIG_RISCV_PMU must have been defined when riscv_pmu.c gets
compiled, so this patch removes the redundant check.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240708121224.1148154-1-xiao.w.wang@intel.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Jinjie Ruan <ruanjinjie@huawei.com> says:
Add RISC-V USER_STACKTRACE support, and fix the fp alignment bug
in perf_callchain_user() by the way as Björn pointed out.
* b4-shazam-merge:
riscv: stacktrace: Add USER_STACKTRACE support
riscv: Fix fp alignment bug in perf_callchain_user()
Link: https://lore.kernel.org/r/20240708032847.2998158-1-ruanjinjie@huawei.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This is used in poison.h for poison pointer offset. Based on current
SV39, SV48 and SV57 vm layout, 0xdead000000000000 is a proper value
that is not mappable, this can avoid potentially turning an oops to
an expolit.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Fixes: fbe934d69e ("RISC-V: Build Infrastructure")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240705170210.3236-1-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This reverts commit fa247089de.
The following sequence of commands causes a livelock - there will be
workqueue process looping and consuming 100% CPU:
dmsetup create --notable test
truncate -s 1MiB testdata
losetup /dev/loop0 testdata
dmsetup load test --table '0 2048 linear /dev/loop0 0'
dd if=/dev/zero of=/dev/dm-0 bs=16k count=1 conv=fdatasync
The livelock is caused by the commit fa247089de. The commit claims that
it fixes a race condition, however, it is unknown what the actual race
condition is and what program is involved in the race condition.
When the inactive table is loaded, the nodes /dev/dm-0 and
/sys/block/dm-0 are created. /dev/dm-0 has zero size at this point. When
the device is suspended and resumed, the nodes /dev/mapper/test and
/dev/disk/* are created.
If some program opens a block device before it is created by dmsetup or
lvm, the program is buggy, so dm could just report an error as it used to
do before.
Reported-by: Zdenek Kabelac <zkabelac@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Fixes: fa247089de ("dm: requeue IO if mapping table not yet available")
list_head can be initialized automatically with LIST_HEAD()
instead of calling INIT_LIST_HEAD(). No functional impact.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
SFU since its (first) version 3.0 supports AF_LOCAL sockets and stores them
on filesytem as system file with one zero byte. Add support for detecting
this SFU socket type into cifs_sfu_type() function.
With this change cifs_sfu_type() would correctly detect all special file
types created by SFU: fifo, socket, symlink, block and char.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
For debugging purposes it is a good idea to show detected SFU type also for
Fifo. Debug message is already print for all other special types.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
SFU types IntxCHR and IntxBLK are 8 bytes with zero as last byte. Make it
explicit in memcpy and memset calls, so the zero byte is visible in the
code (and not hidden as string trailing nul byte).
It is important for reader to show the last byte for block and char types
because it differs from the last byte of symlink type (which has it 0x01).
Also it is important to show that the type is not nul-term string, but
rather 8 bytes (with some printable bytes).
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Currently when sfu mount option is specified then CIFS can recognize SFU
symlink, but is not able to read symlink target location. readlink()
syscall just returns that operation is not supported.
Implement this missing functionality in cifs_sfu_type() function. Read
target location of SFU-style symlink, parse it and fill into fattr's
cf_symlink_target member.
SFU-style symlink is file which has system attribute set and file content
is buffer "IntxLNK\1" (8th byte is 0x01) followed by the target location
encoded in little endian UCS-2/UTF-16. This format was introduced in
Interix 3.0 subsystem, as part of the Microsoft SFU 3.0 and is used also by
all later versions. Previous versions had no symlink support.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
SFU symlinks have 8 byte prefix: "IntxLNK\1".
So check also the last 8th byte 0x01.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Using uninitialized value "bkt" when calling "kfree"
Fixes: 13b68d44990d ("smb: client: compress: LZ77 code improvements cleanup")
Signed-off-by: Qianqiang Liu <qianqiang.liu@163.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
The dst pointer may not be initialized when calling kvfree(dst)
Fixes: 13b68d44990d9 ("smb: client: compress: LZ77 code improvements cleanup")
Signed-off-by: Qianqiang Liu <qianqiang.liu@163.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
- Check data compressibility with some heuristics (copied from
btrfs):
- should_compress() final decision is is_compressible(data)
- Cleanup compress/lz77.h leaving only lz77_compress() exposed:
- Move parts to compress/lz77.c, while removing the rest of it
because they were either unused, used only once, were
implemented wrong (thanks to David Howells for the help)
- Updated the compression parameters (still compatible with
Windows implementation) trading off ~20% compression ratio
for ~40% performance:
- min match len: 3 -> 4
- max distance: 8KiB -> 1KiB
- hash table type: u32 * -> u64 *
Known bugs:
This implementation currently works fine in general, but breaks with
some payloads used during testing. Investigation ongoing, to be
fixed in a next commit.
Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de>
Co-developed-by: David Howells <dhowells@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
On smb2_async_writev(), set CIFS_COMPRESS_REQ on request flags if
should_compress() returns true.
On smb_send_rqst() check the flags, and compress and send the request to
the server.
(*) If the compression fails with -EMSGSIZE (i.e. compressed size is >=
uncompressed size), the original uncompressed request is sent instead.
Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
Move SMB3.1.1 compression code into experimental config option,
and fix the compress mount option. Implement unchained LZ77
"plain" compression algorithm as per MS-XCA specification
section "2.3 Plain LZ77 Compression Algorithm Details".
Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
The cifs_dir_open() have been removed since
commit 737b758c96 ("[PATCH] cifs: character mapping of special
characters (part 3 of 3)"), and now it is useless, so remove it.
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Use the min() macro to simplify the function and improve
its readability.
Signed-off-by: Shen Lichuan <shenlichuan@vivo.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Use ERR_CAST() as it is designed for casting an error pointer to
another type.
This macro uses the __force and __must_check modifiers, which are used
to tell the compiler to check for errors where this macro is used.
Signed-off-by: Yuesong Li <liyuesong@vivo.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Explained why the typo was not corrected.
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Reviewed-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
There are only 4 different definitions between the client and server:
- STATUS_SERVER_UNAVAILABLE: from client/smb2status.h
- STATUS_FILE_NOT_AVAILABLE: from client/smb2status.h
- STATUS_NO_PREAUTH_INTEGRITY_HASH_OVERLAP: from server/smbstatus.h
- STATUS_INVALID_LOCK_RANGE: from server/smbstatus.h
Rename client/smb2status.h to common/smb2status.h, and merge the
2 different definitions of server to common header file.
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
In order to maintain the code more easily, move duplicate definitions
to new common header file.
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Preparation for moving acl definitions to new common header file.
Use the following shell command to rename:
find fs/smb/client -type f -exec sed -i \
's/struct cifs_ace/struct smb_ace/g' {} +
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Reviewed-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Preparation for moving acl definitions to new common header file.
Use the following shell command to rename:
find fs/smb/client -type f -exec sed -i \
's/struct cifs_acl/struct smb_acl/g' {} +
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Reviewed-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Preparation for moving acl definitions to new common header file.
Use the following shell command to rename:
find fs/smb/client -type f -exec sed -i \
's/struct cifs_sid/struct smb_sid/g' {} +
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Reviewed-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Preparation for moving acl definitions to new common header file.
Use the following shell command to rename:
find fs/smb/client -type f -exec sed -i \
's/struct cifs_ntsd/struct smb_ntsd/g' {} +
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Reviewed-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
There is a copy and paste bug so this code checks "sq->dep_wqe" where
"sq->wr_priv" was intended. It could result in a NULL pointer
dereference.
Fixes: 2ca62599aa ("net/mlx5: HWS, added send engine and context handling")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/da822315-02b7-4f5b-9c86-0d5176c5069d@stanley.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The cgroup_get_from_path() function never returns NULL, it returns error
pointers. Update the error handling to match.
Fixes: 7f3287db65 ("netfilter: nft_socket: make cgroupsv2 matching work with namespaces")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Florian Westphal <fw@strlen.de>
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Link: https://patch.msgid.link/bbc0c4e0-05cc-4f44-8797-2f4b3920a820@stanley.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ice_allocate_sf() function returns error pointers on error. It
doesn't return NULL. Update the check to match.
Fixes: 177ef7f1e2 ("ice: base subfunction aux driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/6951d217-ac06-4482-a35d-15d757fd90a3@stanley.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ice_repr_create() function returns error pointers. It never returns
NULL. Fix the callers to check for IS_ERR().
Fixes: 977514fb0f ("ice: create port representor for SF")
Fixes: 415db8399d ("ice: make representor code generic")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/7f7aeb91-8771-47b8-9275-9d9f64f947dd@stanley.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some platforms that use fs_enet don't have the PER register clock. This
optional dependency on the clock was incorrectly made mandatory when
switching to devm_ accessors.
Reported-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Closes: https://lore.kernel.org/netdev/4e4defa9-ef2f-4ff1-95ca-6627c24db20c@wanadoo.fr/
Fixes: c614acf6e8 ("net: ethernet: fs_enet: simplify clock handling with devm accessors")
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://patch.msgid.link/20240914081821.209130-1-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If we change it to tracking ubuf->start + ubuf->len, then we can reduce
the size of struct io_mapped_ubuf by another 4 bytes, effectively 8
bytes, as a hole is eliminated too.
This shrinks io_mapped_ubuf to 32 bytes.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We don't really need to cache this, let's reclaim 8 bytes from struct
io_mapped_ubuf and just calculate it when we need it. The only hot path
here is io_import_fixed().
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The use of for_each_child_of_node_scoped() has been spread into the
subsystem drivers. Aside from that, a couple of exit path have been
fixed (mtk, denali), the TI GPMC bindings have been enhanced to comply
with up-to-date partition descriptions and as always there is a load of
small and misc fixes.
* SPI-NAND changes
The most impacting series this cycle is bringing support for continuous
reads in the SPI-NAND subsystem. This is a feature already merged in the
raw NAND subsystem which allows optimizing the internal fetch times in
the chip while reading sequential pages within an eraseblock. For now
only Macronix NANDs benefit from this feature. While we are talking
about Macronix, some of their chip need an explicit action for selecting
a different plane, and support for it has also been brought.
The bitflip threshold has also been set to the same arbitrary level as
in the raw NAND subsystem to optimize wear leveling decisions, and
finally support for a new Winbond chip has been added.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAmbkfEYACgkQJWrqGEe9
VoT9TAgAsJZeCITvQfCBcaBScr8O86eqynvwkkfltdK8kcdCtH7P3gR9XvMmOOq8
QY8Ru072ufTj0dwT+YnWlRZ0jopK2Kd8JB41jYm4pP3euSUyIm+gf5d7AbHoWlLm
J6HfvnDNzEO0Fixpj3hqFKCDr1Xt0jWzVLh/ZyNa+0co/oJi0w0lnWxIs/iCgBQ2
sSosVhc0X0kt7RhV8RFvyIu3i9k3MFzKYt6hP07PpAVxlshvWHLOnU27FiIhGioz
UGwasbZ2XLbOZhcGaK9Q+cCrMZn52zJI8inlLKBFizU1+eUz4Q1kCVnx0OiPz7uW
7NyiiOUjPpJCrkKpWZbUnV3C2lZQOg==
=Xg6Q
-----END PGP SIGNATURE-----
Merge tag 'nand/for-6.12' into mtd/next
* Raw NAND changes
The use of for_each_child_of_node_scoped() has been spread into the
subsystem drivers. Aside from that, a couple of exit path have been
fixed (mtk, denali), the TI GPMC bindings have been enhanced to comply
with up-to-date partition descriptions and as always there is a load of
small and misc fixes.
* SPI-NAND changes
The most impacting series this cycle is bringing support for continuous
reads in the SPI-NAND subsystem. This is a feature already merged in the
raw NAND subsystem which allows optimizing the internal fetch times in
the chip while reading sequential pages within an eraseblock. For now
only Macronix NANDs benefit from this feature. While we are talking
about Macronix, some of their chip need an explicit action for selecting
a different plane, and support for it has also been brought.
The bitflip threshold has also been set to the same arbitrary level as
in the raw NAND subsystem to optimize wear leveling decisions, and
finally support for a new Winbond chip has been added.
Notable changes:
- Add Write Protect support for N25Q064A.
- New flash support for Zetta ZD25Q128C and Spansion S28HS256T.
- Fix a NULL dereference in probe path for flashes without a name. The
probe path tries to access the name without checking its existence
first. S28HS256T is the first flash to define its entry without a
name, uncovering this issue.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQQTlUWNzXGEo3bFmyIR4drqP028CQUCZuWyzBQccHJhdHl1c2hA
a2VybmVsLm9yZwAKCRAR4drqP028CXj6AQCvucu8Z8Z2WDwvpn51GGNOSmgIfHkJ
i02EIQW5Cz3dygEA7pVZYyW1M/IfbgauX/NI/eYoEFwDfMD5t+MJ4HId+wY=
=F9Ud
-----END PGP SIGNATURE-----
Merge tag 'spi-nor/for-6.12' into mtd/next
SPI NOR changes for 6.12
Notable changes:
- Add Write Protect support for N25Q064A.
- New flash support for Zetta ZD25Q128C and Spansion S28HS256T.
- Fix a NULL dereference in probe path for flashes without a name. The
probe path tries to access the name without checking its existence
first. S28HS256T is the first flash to define its entry without a
name, uncovering this issue.
This triggers an issue in the bochsdrm driver, which used ioremap()
instead of ioremap_wc() to map the video RAM. The revert lets video
RAM use the WB memory type instead of the slower UC memory type.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmbmhVcUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPC8gf9GT8ynM3/+csYTKKvJ3acvhvFoIl0
xzptkWh9tal7H1jPG+BFq44o8DbAcb9u5pxPng9ng5ojmPwticBRWt6dpWyKurTm
WKT2JRCV/6/sPDu8WrMLli9c/9P85ETFAyAPyr4CO4/rPg173qtLT5zxWjsLi0xz
ZtVdAdHj041skYH8REYyRm2zolq/PIj7TWWAYZVRWgX2AkQeRq//g51MpBgLfbYt
BNL7TLqpaD3ZSNHXsTZDn3c1jh9VnPGFPa+QSq2a6JgPPqCuJzs7RpPwMzTRlkoT
agdRf8Wj082u1kqMGCHLXHGQybevauLs+yQYRkojpxj774PPNzH3kEGOEA==
=9Eo3
-----END PGP SIGNATURE-----
Merge tag 'for-linus-6.11' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fix from Paolo Bonzini:
"Do not always honor guest PAT on CPUs that support self-snoop.
This triggers an issue in the bochsdrm driver, which used ioremap()
instead of ioremap_wc() to map the video RAM.
The revert lets video RAM use the WB memory type instead of the slower
UC memory type"
* tag 'for-linus-6.11' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
Revert "KVM: VMX: Always honor guest PAT on CPUs that support self-snoop"
The preventive sfence.vma were emitted because new mappings must be made
visible to the page table walker but Svvptc guarantees that it will
happen within a bounded timeframe, so no need to sfence.vma for the uarchs
that implement this extension, we will then take gratuitous (but very
unlikely) page faults, similarly to x86 and arm64.
This allows to drastically reduce the number of sfence.vma emitted:
* Ubuntu boot to login:
Before: ~630k sfence.vma
After: ~200k sfence.vma
* ltp - mmapstress01
Before: ~45k
After: ~6.3k
* lmbench - lat_pagefault
Before: ~665k
After: 832 (!)
* lmbench - lat_mmap
Before: ~546k
After: 718 (!)
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240717060125.139416-5-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
In 6.5, we removed the vmalloc fault path because that can't work (see
[1] [2]). Then in order to make sure that new page table entries were
seen by the page table walker, we had to preventively emit a sfence.vma
on all harts [3] but this solution is very costly since it relies on IPI.
And even there, we could end up in a loop of vmalloc faults if a vmalloc
allocation is done in the IPI path (for example if it is traced, see
[4]), which could result in a kernel stack overflow.
Those preventive sfence.vma needed to be emitted because:
- if the uarch caches invalid entries, the new mapping may not be
observed by the page table walker and an invalidation may be needed.
- if the uarch does not cache invalid entries, a reordered access
could "miss" the new mapping and traps: in that case, we would actually
only need to retry the access, no sfence.vma is required.
So this patch removes those preventive sfence.vma and actually handles
the possible (and unlikely) exceptions. And since the kernel stacks
mappings lie in the vmalloc area, this handling must be done very early
when the trap is taken, at the very beginning of handle_exception: this
also rules out the vmalloc allocations in the fault path.
Link: https://lore.kernel.org/linux-riscv/20230531093817.665799-1-bjorn@kernel.org/ [1]
Link: https://lore.kernel.org/linux-riscv/20230801090927.2018653-1-dylan@andestech.com [2]
Link: https://lore.kernel.org/linux-riscv/20230725132246.817726-1-alexghiti@rivosinc.com/ [3]
Link: https://lore.kernel.org/lkml/20200508144043.13893-1-joro@8bytes.org/ [4]
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Yunhui Cui <cuiyunhui@bytedance.com>
Link: https://lore.kernel.org/r/20240717060125.139416-4-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Add description for the Svvptc ISA extension which was ratified recently.
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240717060125.139416-3-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Add support to parse the Svvptc string in the riscv,isa string.
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240717060125.139416-2-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Now, riscv has been converted to the new style SYM_ assembler
annotations. So select ARCH_USE_SYM_ANNOTATIONS to ensure the
deprecated macros such as ENTRY(), END(), WEAK() and so on are not
available and we don't regress.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-By: Clément Léger <cleger@rivosinc.com>
Link: https://lore.kernel.org/r/20240709160536.3690-3-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Currently, userstacktrace is unsupported for riscv. So use the
perf_callchain_user() code as blueprint to implement the
arch_stack_walk_user() which add userstacktrace support on riscv.
Meanwhile, we can use arch_stack_walk_user() to simplify the implementation
of perf_callchain_user().
A ftrace test case is shown as below:
# cd /sys/kernel/debug/tracing
# echo 1 > options/userstacktrace
# echo 1 > options/sym-userobj
# echo 1 > events/sched/sched_process_fork/enable
# cat trace
......
bash-178 [000] ...1. 97.968395: sched_process_fork: comm=bash pid=178 child_comm=bash child_pid=231
bash-178 [000] ...1. 97.970075: <user stack trace>
=> /lib/libc.so.6[+0xb5090]
Also a simple perf test is ok as below:
# perf record -e cpu-clock --call-graph fp top
# perf report --call-graph
.....
[[31m 66.54%[[m 0.00% top [kernel.kallsyms] [k] ret_from_exception
|
---ret_from_exception
|
|--[[31m58.97%[[m--do_trap_ecall_u
| |
| |--[[31m17.34%[[m--__riscv_sys_read
| | ksys_read
| | |
| | --[[31m16.88%[[m--vfs_read
| | |
| | |--[[31m10.90%[[m--seq_read
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Tested-by: Jinjie Ruan <ruanjinjie@huawei.com>
Cc: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/r/20240708032847.2998158-3-ruanjinjie@huawei.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This reverts commit 377b2f359d.
This caused a regression with the bochsdrm driver, which used ioremap()
instead of ioremap_wc() to map the video RAM. After the commit, the
WB memory type is used without the IGNORE_PAT, resulting in the slower
UC memory type. In fact, UC is slow enough to basically cause guests
to not boot... but only on new processors such as Sapphire Rapids and
Cascade Lake. Coffee Lake for example works properly, though that might
also be an effect of being on a larger, more NUMA system.
The driver has been fixed but that does not help older guests. Until we
figure out whether Cascade Lake and newer processors are working as
intended, revert the commit. Long term we might add a quirk, but the
details depend on whether the processors are working as intended: for
example if they are, the quirk might reference bochs-compatible devices,
e.g. in the name and documentation, so that userspace can disable the
quirk by default and only leave it enabled if such a device is being
exposed to the guest.
If instead this is actually a bug in CLX+, then the actions we need to
take are different and depend on the actual cause of the bug.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM/riscv changes for 6.12
- Fix sbiret init before forwarding to userspace
- Don't zero-out PMU snapshot area before freeing data
- Allow legacy PMU access from guest
- Fix to allow hpmcounter31 from the guest
LoongArch KVM changes for v6.12
1. Revert qspinlock to test-and-set simple lock on VM.
2. Add Loongson Binary Translation extension support.
3. Add PMU support for guest.
4. Enable paravirt feature control from VMM.
5. Implement function kvm_para_has_feature().
