With hardware assisted virtualization, there are two level HW mmu, one
is GVA to GPA mapping, the other is GPA to HPA mapping which is called
secondary mmu in generic. If there is page fault for secondary mmu,
there needs tlb flush operation indexed with fault GPA address and VMID.
VMID is stored at register CSR.GSTAT and will be reload or recalculated
before guest entry.
Currently CSR.GSTAT is not saved and restored during VCPU context
switch, instead it is recalculated during guest entry. So CSR.GSTAT is
effective only when a VCPU runs in guest mode, however it may not be
effective if the VCPU exits to host mode. Since register CSR.GSTAT may
be stale, it may records the VMID of the last schedule-out VCPU, rather
than the current VCPU.
Function kvm_flush_tlb_gpa() should be called with its real VMID, so
here move it to the guest entrance. Also an arch-specific request id
KVM_REQ_TLB_FLUSH_GPA is added to flush tlb for secondary mmu, and it
can be optimized if VMID is updated, since all guest tlb entries will
be invalid if VMID is updated.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Currently interrupts are posted and cleared with the asynchronous mode,
meanwhile they are saved in SW state vcpu::arch::irq_pending and vcpu::
arch::irq_clear. When vcpu is ready to run, pending interrupt is written
back to CSR.ESTAT register from SW state vcpu::arch::irq_pending at the
guest entrance.
During VM migration stage, vcpu is put into stopped state, however
pending interrupts are not synced to CSR.ESTAT register. So there will
be interrupt lost when VCPU is migrated to another host machines.
Here in this patch when ESTAT CSR register is read from VMM user mode,
pending interrupts are synchronized to ESTAT also. So that VMM can get
correct pending interrupts.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
When running BPF selftests (./test_progs -t sockmap_basic) on a Loongarch
platform, the following kernel panic occurs:
[...]
Oops[#1]:
CPU: 22 PID: 2824 Comm: test_progs Tainted: G OE 6.10.0-rc2+ #18
Hardware name: LOONGSON Dabieshan/Loongson-TC542F0, BIOS Loongson-UDK2018
... ...
ra: 90000000048bf6c0 sk_msg_recvmsg+0x120/0x560
ERA: 9000000004162774 copy_page_to_iter+0x74/0x1c0
CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE)
PRMD: 0000000c (PPLV0 +PIE +PWE)
EUEN: 00000007 (+FPE +SXE +ASXE -BTE)
ECFG: 00071c1d (LIE=0,2-4,10-12 VS=7)
ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0)
BADV: 0000000000000040
PRID: 0014c011 (Loongson-64bit, Loongson-3C5000)
Modules linked in: bpf_testmod(OE) xt_CHECKSUM xt_MASQUERADE xt_conntrack
Process test_progs (pid: 2824, threadinfo=0000000000863a31, task=...)
Stack : ...
Call Trace:
[<9000000004162774>] copy_page_to_iter+0x74/0x1c0
[<90000000048bf6c0>] sk_msg_recvmsg+0x120/0x560
[<90000000049f2b90>] tcp_bpf_recvmsg_parser+0x170/0x4e0
[<90000000049aae34>] inet_recvmsg+0x54/0x100
[<900000000481ad5c>] sock_recvmsg+0x7c/0xe0
[<900000000481e1a8>] __sys_recvfrom+0x108/0x1c0
[<900000000481e27c>] sys_recvfrom+0x1c/0x40
[<9000000004c076ec>] do_syscall+0x8c/0xc0
[<9000000003731da4>] handle_syscall+0xc4/0x160
Code: ...
---[ end trace 0000000000000000 ]---
Kernel panic - not syncing: Fatal exception
Kernel relocated by 0x3510000
.text @ 0x9000000003710000
.data @ 0x9000000004d70000
.bss @ 0x9000000006469400
---[ end Kernel panic - not syncing: Fatal exception ]---
[...]
This crash happens every time when running sockmap_skb_verdict_shutdown
subtest in sockmap_basic.
This crash is because a NULL pointer is passed to page_address() in the
sk_msg_recvmsg(). Due to the different implementations depending on the
architecture, page_address(NULL) will trigger a panic on Loongarch
platform but not on x86 platform. So this bug was hidden on x86 platform
for a while, but now it is exposed on Loongarch platform. The root cause
is that a zero length skb (skb->len == 0) was put on the queue.
This zero length skb is a TCP FIN packet, which was sent by shutdown(),
invoked in test_sockmap_skb_verdict_shutdown():
shutdown(p1, SHUT_WR);
In this case, in sk_psock_skb_ingress_enqueue(), num_sge is zero, and no
page is put to this sge (see sg_set_page in sg_set_page), but this empty
sge is queued into ingress_msg list.
And in sk_msg_recvmsg(), this empty sge is used, and a NULL page is got by
sg_page(sge). Pass this NULL page to copy_page_to_iter(), which passes it
to kmap_local_page() and to page_address(), then kernel panics.
To solve this, we should skip this zero length skb. So in sk_msg_recvmsg(),
if copy is zero, that means it's a zero length skb, skip invoking
copy_page_to_iter(). We are using the EFAULT return triggered by
copy_page_to_iter to check for is_fin in tcp_bpf.c.
Fixes: 604326b41a ("bpf, sockmap: convert to generic sk_msg interface")
Suggested-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/e3a16eacdc6740658ee02a33489b1b9d4912f378.1719992715.git.tanggeliang@kylinos.cn
The initial idea of the Colorspace prop was that this maps 1:1 to
InfoFrames/SDP but KMS does not give user space enough information nor
control over the output format to figure out which variants can be used
for a given KMS commit. At the same time, properties like Broadcast RGB
expect full range quantization range being produced by user space from
the CRTC and drivers to convert to the range expected by the sink for
the chosen output format, mode, InfoFrames, etc.
This change documents the reality of the Colorspace property. The
Default variant unfortunately is very much driver specific and not
reflected by the EDID. The BT2020 variants are in active use by generic
compositors which have expectations from the driver about the
conversions it has to do when selecting certain output formats.
Everything else is also marked as undefined. Coming up with valid
behavior that makes it usable from user space and consistent with other
KMS properties for those variants is left as an exercise for whoever
wants to use them.
v2:
* Talk about "pixel operation properties" that user space configures
* Mention that user space is responsible for checking the EDID for sink
support
* Make it clear that drivers can choose between RGB and YCbCr on their
own
Signed-off-by: Sebastian Wick <sebastian.wick@redhat.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240702143017.2429975-1-sebastian.wick@redhat.com
The GPIO subsystem used to have a serious problem with undefined behavior
and use-after-free bugs on hot-unplug of GPIO chips. This can be
considered a corner-case by some as most GPIO controllers are enabled
early in the boot process and live until the system goes down but most
GPIO drivers do allow unbind over sysfs, many are loadable modules that
can be (force) unloaded and there are also GPIO devices that can be
dynamically detached, for instance CP2112 which is a USB GPIO expender.
Bugs can be triggered both from user-space as well as by in-kernel users.
We have the means of testing it from user-space via the character device
but the issues manifest themselves differently in the kernel.
This is a proposition of adding a new virtual driver - a configurable
GPIO consumer that can be configured over configfs (similarly to
gpio-sim) or described on the device-tree.
This driver is aimed as a helper in spotting any regressions in
hot-unplug handling in GPIOLIB.
Link: https://lore.kernel.org/r/20240708142912.120570-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The return value of __invalid_xchg_size() is assigned to tmp instead of
the return variable x. Assign it to x instead.
Fixes: 2501cf768e ("m68k: Fix xchg/cmpxchg to fail to link if given an inappropriate pointer")
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/20240702034116.140234-2-thorsten.blum@toblux.com
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
The driver doesn't use the driver_data member of struct i2c_device_id,
so don't explicitly initialize this member.
This prepares putting driver_data in an anonymous union which requires
either no initialization or named designators. But it's also a nice
cleanup on its own.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20240708130254.9631-2-u.kleine-koenig@baylibre.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The rebase of commit 09595e0c9d ("block: pass a phys_addr_t to
get_max_segment_size") lost adding the total to to the offset in
blk_bvec_map_sg. Add it back.
Fixes: 09595e0c9d ("block: pass a phys_addr_t to get_max_segment_size")
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Reported-by: Chaitanya Kulkarni <chaitanyak@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240709070126.3019940-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Correct the parameter name in the comment of get_max_segment_size()
to fix following warning:-
block/blk-merge.c:220: warning: Function parameter or struct member 'len' not described in 'get_max_segment_size'
block/blk-merge.c:220: warning: Excess function parameter 'max_len' description in 'get_max_segment_size'
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240709045432.8688-1-kch@nvidia.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The block queue limits validation does this for us now.
The loop_configure() -> WARN_ON_ONCE() call is dropped, as an invalid
block size would trigger this now. We don't want userspace to be able to
directly trigger WARNs.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Link: https://lore.kernel.org/r/20240708091651.177447-6-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The block queue limits validation does this for us now.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240708091651.177447-5-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The block queue limits validation does this for us now.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Link: https://lore.kernel.org/r/20240708091651.177447-4-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Some drivers validate that their own logical block size. It is no harm to
always do this, so validate in blk_validate_limits().
This allows us to remove the validation in most of those drivers.
Add a comment to blk_validate_block_size() to inform users that self-
validation of LBS is usually unnecessary.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240708091651.177447-3-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If we fail to read a logical block size in virtblk_read_limits() ->
virtio_cread_feature(), then we default to what is in
lim->logical_block_size, but that would be 0.
We can deal with lim->logical_block_size = 0 later in the
blk_mq_alloc_disk(), but the code in virtblk_read_limits() needs a proper
default, so give a default of SECTOR_SIZE.
Fixes: 27e32cd23f ("block: pass a queue_limits argument to blk_mq_alloc_disk")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240708091651.177447-2-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The test thread will start N benchmark kthreads and then schedule out
until the test time finished and notify the benchmark kthreads to stop.
The benchmark kthreads will keep running until notified to stop.
There's a problem with current implementation when the benchmark
kthreads number is equal to the CPUs on a non-preemptible kernel:
since the scheduler will balance the kthreads across the CPUs and
when the test time's out the test thread won't get a chance to be
scheduled on any CPU then cannot notify the benchmark kthreads to stop.
This can be easily reproduced on a VM (simulated with 16 CPUs) with
PREEMPT_VOLUNTARY:
estuary:/mnt$ ./dma_map_benchmark -t 16 -s 1
rcu: INFO: rcu_sched self-detected stall on CPU
rcu: 10-...!: (5221 ticks this GP) idle=ed24/1/0x4000000000000000 softirq=142/142 fqs=0
rcu: (t=5254 jiffies g=-559 q=45 ncpus=16)
rcu: rcu_sched kthread starved for 5255 jiffies! g-559 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x0 ->cpu=12
rcu: Unless rcu_sched kthread gets sufficient CPU time, OOM is now expected behavior.
rcu: RCU grace-period kthread stack dump:
task:rcu_sched state:R running task stack:0 pid:16 tgid:16 ppid:2 flags:0x00000008
Call trace
__switch_to+0xec/0x138
__schedule+0x2f8/0x1080
schedule+0x30/0x130
schedule_timeout+0xa0/0x188
rcu_gp_fqs_loop+0x128/0x528
rcu_gp_kthread+0x1c8/0x208
kthread+0xec/0xf8
ret_from_fork+0x10/0x20
Sending NMI from CPU 10 to CPUs 0:
NMI backtrace for cpu 0
CPU: 0 PID: 332 Comm: dma-map-benchma Not tainted 6.10.0-rc1-vanilla-LSE #8
Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : arm_smmu_cmdq_issue_cmdlist+0x218/0x730
lr : arm_smmu_cmdq_issue_cmdlist+0x488/0x730
sp : ffff80008748b630
x29: ffff80008748b630 x28: 0000000000000000 x27: ffff80008748b780
x26: 0000000000000000 x25: 000000000000bc70 x24: 000000000001bc70
x23: ffff0000c12af080 x22: 0000000000010000 x21: 000000000000ffff
x20: ffff80008748b700 x19: ffff0000c12af0c0 x18: 0000000000010000
x17: 0000000000000001 x16: 0000000000000040 x15: ffffffffffffffff
x14: 0001ffffffffffff x13: 000000000000ffff x12: 00000000000002f1
x11: 000000000001ffff x10: 0000000000000031 x9 : ffff800080b6b0b8
x8 : ffff0000c2a48000 x7 : 000000000001bc71 x6 : 0001800000000000
x5 : 00000000000002f1 x4 : 01ffffffffffffff x3 : 000000000009aaf1
x2 : 0000000000000018 x1 : 000000000000000f x0 : ffff0000c12af18c
Call trace:
arm_smmu_cmdq_issue_cmdlist+0x218/0x730
__arm_smmu_tlb_inv_range+0xe0/0x1a8
arm_smmu_iotlb_sync+0xc0/0x128
__iommu_dma_unmap+0x248/0x320
iommu_dma_unmap_page+0x5c/0xe8
dma_unmap_page_attrs+0x38/0x1d0
map_benchmark_thread+0x118/0x2c0
kthread+0xec/0xf8
ret_from_fork+0x10/0x20
Solve this by adding scheduling point in the kthread loop,
so if there're other threads in the system they may have
a chance to run, especially the thread to notify the test
end. However this may degrade the test concurrency so it's
recommended to run this on an idle system.
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Acked-by: Barry Song <baohua@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Originally, we were quite conservative in limiting maximum transaction
size to a quarter of the journal because we were not accounting
transaction descriptor and revoke blocks. These days we do properly
account them and reserve space for them from the total transaction
credits. Thus there's no need to be so conservative and we can increase
the maximum transaction size to one third of the journal (even half
should work fine in principle but the performance will likely suffer in
that case). This also fixes failures to grow filesystems with tiny
journals.
Link: CA+hUFcuGs04JHZ_WzA1zGN57+ehL2qmHOt5a7RMpo+rv6Vyxtw@mail.gmail.com
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20240701132800.7158-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In jbd2_journal_init_common() we set batch size of a shrinker shrinking
checkpointed buffers to journal->j_max_transaction_buffers. But that is
guaranteed to be 0 at that point so we effectively stay with the default
shrinker batch size of 128. It has been like this since introduction of
jbd2 shrinkers so just drop the pointless initialization.
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20240624170127.3253-4-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Commit 9f356e5a4f ("jbd2: Account descriptor blocks into
t_outstanding_credits") started to account descriptor blocks into
transactions outstanding credits. However it didn't appropriately
decrease the maximum amount of credits available to userspace. Thus if
the filesystem requests a transaction smaller than
j_max_transaction_buffers but large enough that when descriptor blocks
are added the size exceeds j_max_transaction_buffers, we confuse
add_transaction_credits() into thinking previous handles have grown the
transaction too much and enter infinite journal commit loop in
start_this_handle() -> add_transaction_credits() trying to create
transaction with enough credits available.
Fix the problem by properly accounting for transaction space reserved
for descriptor blocks when verifying requested transaction handle size.
CC: stable@vger.kernel.org
Fixes: 9f356e5a4f ("jbd2: Account descriptor blocks into t_outstanding_credits")
Reported-by: Alexander Coffin <alex.coffin@maticrobots.com>
Link: https://lore.kernel.org/all/CA+hUFcuGs04JHZ_WzA1zGN57+ehL2qmHOt5a7RMpo+rv6Vyxtw@mail.gmail.com
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20240624170127.3253-3-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Instead of computing the number of descriptor blocks a transaction can
have each time we need it (which is currently when starting each
transaction but will become more frequent later) precompute the number
once during journal initialization together with maximum transaction
size. We perform the precomputation whenever journal feature set is
updated similarly as for computation of
journal->j_revoke_records_per_block.
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20240624170127.3253-2-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
There's no reason to have jbd2_journal_get_max_txn_bufs() public
function. Currently all users are internal and can use
journal->j_max_transaction_buffers instead. This saves some unnecessary
recomputations of the limit as a bonus which becomes important as this
function gets more complex in the following patch.
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20240624170127.3253-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We encountered a problem that the file system could not be mounted in
the power-off scenario. The analysis of the file system mirror shows that
only part of the data is written to the last commit block.
The valid data of the commit block is concentrated in the first sector.
However, the data of the entire block is involved in the checksum calculation.
For different hardware, the minimum atomic unit may be different.
If the checksum of a committed block is incorrect, clear the data except the
'commit_header' and then calculate the checksum. If the checkusm is correct,
it is considered that the block is partially committed, Then continue to replay
journal.
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240620072405.3533701-1-yebin@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If the extended attribute size is not a multiple of block size, the last
block in the EA inode will have uninitialized tail which will get
written to disk. We will never expose the data to userspace but still
this is not a good practice so just zero out the tail of the block as it
isn't going to cause a noticeable performance overhead.
Fixes: e50e5129f3 ("ext4: xattr-in-inode support")
Reported-by: syzbot+9c1fe13fcb51574b249b@syzkaller.appspotmail.com
Reported-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240613150234.25176-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When fast-commit needs to track ranges, it has to handle inodes that have
inlined data in a different way because ext4_fc_write_inode_data(), in the
actual commit path, will attempt to map the required blocks for the range.
However, inodes that have inlined data will have it's data stored in
inode->i_block and, eventually, in the extended attribute space.
Unfortunately, because fast commit doesn't currently support extended
attributes, the solution is to mark this commit as ineligible.
Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1039883
Signed-off-by: Luis Henriques (SUSE) <luis.henriques@linux.dev>
Tested-by: Ben Hutchings <benh@debian.org>
Fixes: 9725958bb7 ("ext4: fast commit may miss tracking unwritten range during ftruncate")
Link: https://patch.msgid.link/20240618144312.17786-1-luis.henriques@linux.dev
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In the fast commit code there are a few places where tid_t variables are
being compared without taking into account the fact that these sequence
numbers may wrap. Fix this issue by using the helper functions tid_gt()
and tid_geq().
Signed-off-by: Luis Henriques (SUSE) <luis.henriques@linux.dev>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://patch.msgid.link/20240529092030.9557-3-luis.henriques@linux.dev
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If we're trying to allocate real space for a delalloc reservation at
offset 0, we should use the rotor to spread files across the rt volume.
Switch the rtalloc to use the XFS_ALLOC_INITIAL_USER_DATA flag that
is set for any write at startoff to make it match the behavior for
the main data device.
Based on a patch from Darrick J. Wong.
Fixes: 6a94b1acda ("xfs: reinstate delalloc for RT inodes (if sb_rextsize == 1)")
Reported-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Bartosz Golaszewski says:
====================
net: stmmac: qcom-ethqos: enable 2.5G ethernet on sa8775p-ride
Here are the changes required to enable 2.5G ethernet on sa8775p-ride.
As advised by Andrew Lunn and Russell King, I am reusing the existing
stmmac infrastructure to enable the SGMII loopback and so I dropped the
patches adding new callbacks to the driver core. I also added more
details to the commit message and made sure the workaround is only
enabled on Rev 3 of the board (with AQR115C PHY). Also: dropped any
mentions of the OCSGMII mode.
v2: https://lore.kernel.org/20240627113948.25358-1-brgl@bgdev.pl
v1: https://lore.kernel.org/20240619184550.34524-1-brgl@bgdev.pl
====================
Link: https://patch.msgid.link/20240703181500.28491-1-brgl@bgdev.pl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On sa8775p-ride-r3 the RX clocks from the AQR115C PHY are not available at
the time of the DMA reset. We can however extract the RX clock from the
internal SERDES block. Once the link is up, we can revert to the
previous state.
The AQR115C PHY doesn't support in-band signalling so we can count on
getting the link up notification and safely reuse existing callbacks
which are already used by another HW quirk workaround which enables the
functional clock to avoid a DMA reset due to timeout.
Only enable loopback on revision 3 of the board - check the phy_mode to
make sure.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20240703181500.28491-3-brgl@bgdev.pl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for 2.5G speed in 2500BASEX mode to the QCom ethqos driver.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20240703181500.28491-2-brgl@bgdev.pl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reinit PHY after cable test, otherwise link can't be established on
tested port. This issue is reproducible on LAN9372 switches with
integrated 100BaseT1 PHYs.
Fixes: 788050256c ("net: phy: microchip_t1: add cable test support for lan87xx phy")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20240705084954.83048-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Building this driver yields the following:
.../drivers/cpufreq/sti-cpufreq.c:215:50: warning: ‘%d’ directive output may be truncated writing between 1 and 10 bytes into a region of size 2 [-Wformat-truncation=]
215 | snprintf(name, MAX_PCODE_NAME_LEN, pcode%d, pcode);
| ^~
.../drivers/cpufreq/sti-cpufreq.c:215:44: note: directive argument in the range [0, 2147483647]
215 | snprintf(name, MAX_PCODE_NAME_LEN, pcode%d, pcode);
| ^~~~~~~~~
.../drivers/cpufreq/sti-cpufreq.c:215:9: note: ‘snprintf’ output between 7 and 16 bytes into a destination of size 7
215 | snprintf(name, MAX_PCODE_NAME_LEN, pcode%d, pcode);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fix the buffer size to avoid the warning at build time.
Signed-off-by: Raphael Gallais-Pou <rgallaispou@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Use the dev_err_probe() helper to log the errors on every error path in
the probe function and its sub-functions. This includes
* adding error messages where there was none
* converting over dev_err/dev_warn
* removing the top-level error message after mtk_cpu_dvfs_info_init() is
called, since every error path inside that function already logs the
error reason. This gets rid of the misleading error message when probe
is deferred:
mtk-cpufreq mtk-cpufreq: failed to initialize dvfs info for cpu0
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Some of LoongArch processors (Loongson-3 series) support DVFS, their
IOCSR.FEATURES has IOCSRF_FREQSCALE set. And they has a micro-core in
the package called SMC (System Management Controller), which can be
used to detect temperature, control fans, scale frequency and voltage,
etc.
The Loongson-3 CPUFreq driver is very simple now, it communicate with
SMC, get DVFS info, set target frequency from CPUFreq core, and so on.
There is a command list to interact with SMC, widely-used commands in
the CPUFreq driver include:
CMD_GET_VERSION: Get SMC firmware version.
CMD_GET_FEATURE: Get enabled SMC features.
CMD_SET_FEATURE: Enable SMC features, such as basic DVFS, BOOST.
CMD_GET_FREQ_LEVEL_NUM: Get the number of all frequency levels.
CMD_GET_FREQ_BOOST_LEVEL: Get the first boost frequency level.
CMD_GET_FREQ_LEVEL_INFO: Get the detail info of a frequency level.
CMD_GET_FREQ_INFO: Get the current frequency.
CMD_SET_FREQ_INFO: Set the target frequency.
In future we will add automatic frequency scaling, which is similar to
Intel's HWP (HardWare P-State).
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
[ Viresh: Minor formatting cleanups, change return type of exit() to
void and use devm_mutex_init() ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The cpufreq core doesn't check the return type of the exit() callback
and there is not much the core can do on failures at that point. Just
drop the returned value and make it return void.
Signed-off-by: Lizhe <sensor1010@163.com>
[ Viresh: Reworked the patches to fix all missing changes together. ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> # Mediatek
Acked-by: Sudeep Holla <sudeep.holla@arm.com> # scpi, scmi, vexpress
Acked-by: Mario Limonciello <mario.limonciello@amd.com> # amd
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> # bmips
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Acked-by: Kevin Hilman <khilman@baylibre.com> # omap
The IOT-GATE-iMX8 board has an Intel Wifi 6 AX200 module.
Enable the IWLWIFI driver so that Wifi can work by default.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Implement periodic dumping of the shared DSQ to demonstrate the use of the
newly added DSQ iterator.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: David Vernet <dvernet@meta.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Cc: bpf@vger.kernel.org
DSQs are very opaque in the consumption path. The BPF scheduler has no way
of knowing which tasks are being considered and which is picked. This patch
adds BPF DSQ iterator.
- Allows iterating tasks queued on a DSQ in the dispatch order or reverse
from anywhere using bpf_for_each(scx_dsq) or calling the iterator kfuncs
directly.
- Has ordering guarantee where only tasks which were already queued when the
iteration started are visible and consumable during the iteration.
v5: - Add a comment to the naked list_empty(&dsq->list) test in
consume_dispatch_q() to explain the reasoning behind the lockless test
and by extension why nldsq_next_task() isn't used there.
- scx_qmap changes separated into its own patch.
v4: - bpf_iter_scx_dsq_new() declaration in common.bpf.h was using the wrong
type for the last argument (bool rev instead of u64 flags). Fix it.
v3: - Alexei pointed out that the iterator is too big to allocate on stack.
Added a prep patch to reduce the size of the cursor. Now
bpf_iter_scx_dsq is 48 bytes and bpf_iter_scx_dsq_kern is 40 bytes on
64bit.
- u32_before() comparison factored out.
v2: - scx_bpf_consume_task() is separated out into a separate patch.
- DSQ seq and iter flags don't need to be u64. Use u32.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: David Vernet <dvernet@meta.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Cc: bpf@vger.kernel.org
struct scx_dsq_node contains two data structure nodes to link the containing
task to a DSQ and a flags field that is protected by the lock of the
associated DSQ. One reason why they are grouped into a struct is to use the
type independently as a cursor node when iterating tasks on a DSQ. However,
when iterating, the cursor only needs to be linked on the FIFO list and the
rb_node part ends up inflating the size of the iterator data structure
unnecessarily making it potentially too expensive to place it on stack.
Take ->priq and ->flags out of scx_dsq_node and put them in sched_ext_entity
as ->dsq_priq and ->dsq_flags, respectively. scx_dsq_node is renamed to
scx_dsq_list_node and the field names are renamed accordingly. This will
help implementing DSQ task iterator that can be allocated on stack.
No functional change intended.
Signed-off-by: Tejun Heo <tj@kernel.org>
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Cc: David Vernet <void@manifault.com>
Add clock generator node to device tree for SG2042, and enable clock for
uart.
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Add compatible strings for the Arm Cortex-A725 and Cortex-A925 CPUs, as
well as new Neoverse cores: Arm Neoverse N3, Neoverse V2, Neoverse V3,
and Neoverse V3AE.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240618160450.3168005-1-andre.przywara@arm.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
PCI devices and bridges DT nodes created during the PCI scan are created
with the interrupt-map property set to handle interrupts.
In order to set this interrupt-map property at a specific level, a
phandle to the parent interrupt controller is needed. On systems that
are not fully described by a device-tree, the parent interrupt
controller may be unavailable (i.e. not described by the device-tree).
As mentioned in the [1], avoiding the use of the interrupt-map property
and considering a PCI device as an interrupt controller itself avoid the
use of a parent interrupt phandle.
In that case, the PCI device itself as an interrupt controller is
responsible for routing the interrupts described in the device-tree
world (DT overlay) to the PCI interrupts.
Add the 'interrupt-controller' property in the PCI device DT node.
[1]: https://lore.kernel.org/lkml/CAL_Jsq+je7+9ATR=B6jXHjEJHjn24vQFs4Tvi9=vhDeK9n42Aw@mail.gmail.com/
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20240527161450.326615-18-herve.codina@bootlin.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
APIs to add some properties in a changeset exist but nothing to add a DT
boolean property (i.e. a property without any values).
Fill this lack with of_changeset_add_prop_bool().
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20240527161450.326615-16-herve.codina@bootlin.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
