sched_domains regulate the load balancing for sched_classes. A machine can
be partitioned into multiple sections that are not load-balanced across
using either isolcpus= boot param or cpuset partitions. In such cases, tasks
that are in one partition are expected to stay within that partition.
cpuset configured partitions are always reflected in each member task's
cpumask. As SCX always honors the task cpumasks, the BPF scheduler is
automatically in compliance with the configured partitions.
However, for isolcpus= domain isolation, the isolated CPUs are simply
omitted from the top-level sched_domain[s] without further restrictions on
tasks' cpumasks, so, for example, a task currently running in an isolated
CPU may have more CPUs in its allowed cpumask while expected to remain on
the same CPU.
There is no straightforward way to enforce this partitioning preemptively on
BPF schedulers and erroring out after a violation can be surprising.
isolcpus= domain isolation is being replaced with cpuset partitions anyway,
so keep it simple and simply disallow loading a BPF scheduler if isolcpus=
domain isolation is in effect.
Signed-off-by: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/20240626082342.GY31592@noisy.programming.kicks-ass.net
Cc: David Vernet <void@manifault.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <frederic@kernel.org>
When initializing p->scx.weight, scx_ops_enable_task() wasn't considering
whether the task is SCHED_IDLE. Update it to use WEIGHT_IDLEPRIO as the
source weight for SCHED_IDLE tasks. This leaves reweight_task_scx() the sole
user of set_task_scx_weight(). Open code it. @weight is going to be provided
by sched core in the future anyway.
v2: Use the newly available @lw->weight to set @p->scx.weight in
reweight_task_scx().
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: David Vernet <void@manifault.com>
Cc: Peter Zijlstra <peterz@infradead.org>
The header file stringpool.h is included for GCC version >= 8 and then
again for all versions.
Since the header file stringpool.h was added in GCC 4.9 and the kernel
currently requires GCC 5.1 as a minimum, remove the conditional include.
Including the header file only once removes the following warning
reported by make includecheck:
stringpool.h is included more than once
However, it's important to include stringpool.h before attribs.h
because attribs.h uses some of its functions.
Compile-tested with GCC 14.
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Link: https://lore.kernel.org/r/20240629233608.278028-2-thorsten.blum@toblux.com
Signed-off-by: Kees Cook <kees@kernel.org>
If of_platform_populate() is called when CONFIG_OF is not defined this
leads to spurious error messages of the following type:
pci 0000:00:01.1: failed to populate child OF nodes (-19)
pci 0000:00:02.1: failed to populate child OF nodes (-19)
Fixes: 8fb18619d9 ("PCI/pwrctl: Create platform devices for child OF nodes of the port node")
Signed-off-by: Bert Karwatzki <spasswolf@web.de>
Closes: https://lore.kernel.org/all/20240702173255.39932-1-superm1@kernel.org/
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Acked-by: Krzysztof Wilczyński <kw@linux.com>
Reported-by: Praveenkumar Patil <PraveenKumar.Patil@amd.com>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20240707183829.41519-1-spasswolf@web.de
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Get rid of prepare and unpreare callbacks for PCIe clock since they can
be modeled as a reset line cosumed by the PCIe driver
(pcie-mediatek-gen3)
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Zhengping Zhang <zhengping.zhang@airoha.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/16df149975514d3030499c48fc1c64f090093595.1719485847.git.lorenzo@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Introduce reset capability to EN7581 device-tree clock binding
documentation. Add reset register mapping between misc scu and pb scu
ones in order to follow the memory order. This change is not
introducing any backward compatibility issue since the EN7581 dts is not
upstream yet.
Fixes: 0a382be005 ("dt-bindings: clock: airoha: add EN7581 binding")
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/28fef3e83062d5d71e7b4be4b47583f851a15bf8.1719485847.git.lorenzo@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The MT8188 sys clocks embed a reset controller: add #reset-cells
to the binding to allow using resets.
Fixes: 1086a5310f ("dt-bindings: clock: mediatek: Add new MT8188 clock")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240619085322.66716-2-angelogioacchino.delregno@collabora.com
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The MT8173 infracfg clock driver does initialization in two steps, via a
CLK_OF_DECLARE_DRIVER declaration. However its early init function
doesn't get to run when it's built as a module, presumably since it's
not loaded by the time it would have been called by of_clk_init(). This
causes its second-step probe() to return -ENOMEM when trying to register
clocks, as the necessary clock_data struct isn't initialized by the
first step.
MT2701 and MT6797 clock drivers also use this mechanism, but they try to
allocate the necessary clock_data structure if missing in the second
step. Mimic that for the MT8173 infracfg clock as well to make it work
as a module.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/r/20240612201211.91683-1-alpernebiyasak@gmail.com
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add required syscon compatible for mt7622 pciesys. This is required for
SATA interface as the regs are shared.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://lore.kernel.org/r/20240628105542.5456-2-ansuelsmth@gmail.com
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Convert the Spreadtrum SC9860 clock bindings to DT schema.
Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
Link: https://lore.kernel.org/r/ZobghvwZAyMjl4eB@standask-GA-A55M-S2HP
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Convert qoria-clock DT binding to yaml format. Split to two files
qoriq-clock.yaml and qoriq-clock-legancy.yaml.
Addtional change:
- Remove clock consumer part in example
- Fixed example dts error
- Deprecated legancy node
- fsl,b4420-clockgen and fsl,b4860-clockgen fallback to fsl,b4-clockgen.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240701205809.1978389-1-Frank.Li@nxp.com
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
sched_fork() returns with -EAGAIN if dl_prio(@p). a7a9fc5492 ("sched_ext:
Add boilerplate for extensible scheduler class") added scx_pre_fork() call
before it and then scx_cancel_fork() on the exit path. This is silly as the
dl_prio() block can just be moved above the scx_pre_fork() call.
Move the dl_prio() block above the scx_pre_fork() call and remove the now
unnecessary scx_cancel_fork() invocation.
Signed-off-by: Tejun Heo <tj@kernel.org>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: David Vernet <void@manifault.com>
for clock controllers and both rk3128 and rk3188 drop the CLK_NR_CLKS
from their dt-binding header, where it does not belong.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmaG9OkQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgRK1CACGI6t5JF2iMisJq0dpwA9HhREvu9NnUwtu
v/AteJyo9rl/3ox55U3srlaTM4AP2+F4e7ZsVrjwVXKcGg4ir6PEkxTJ3sigOcAK
7FSHbcOcDfsRk46Yu/ZhvRQEuVJpuL5F/M36Vdmt2/wVUooCSWVc6RJPtnsdJpx7
rvGY7/fnc0b5uRtZq8mhvbIF11uj80kokKNENWWJ11uymQp4igtEGxYnYMlb/5CO
bXqo98+8ce6cz50piRuFB6NzWhl7BlnSTf5RiMATvi0zgu2I7BVNw5yjvfHVkv6L
XTEF/4B+gxpDOcn65Z7YlD2lhnX5uNvh4kjCsmYxmhkG3L5j+OtT
=TXXc
-----END PGP SIGNATURE-----
Merge tag 'v6.11-rockchip-clk1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-rockchip
Pull Rockchip clk driver updates from Heiko Stuebner:
- Export more clocks for Rockchip rk3128 peripherals
- Convert Rockchip clk drivers to use kmemdup_array()
- Drop CLK_NR_CLKS from Rockchip rk3128 and rk3188 binding headers
* tag 'v6.11-rockchip-clk1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
dt-bindings: clock: rk3188-cru-common: remove CLK_NR_CLKS
clk: rockchip: rk3188: Drop CLK_NR_CLKS usage
clk: rockchip: Switch to use kmemdup_array()
clk: rockchip: rk3128: Add HCLK_SFC
dt-bindings: clock: rk3128: Add HCLK_SFC
dt-bindings: clock: rk3128: Drop CLK_NR_CLKS
clk: rockchip: rk3128: Drop CLK_NR_CLKS usage
clk: rockchip: rk3128: Add hclk_vio_h2p to critical clocks
clk: rockchip: rk3128: Export PCLK_MIPIPHY
dt-bindings: clock: rk3128: Add PCLK_MIPIPHY
There's two problems with shared RCGs.
The first problem is that they incorrectly report the parent after
commit 703db1f5da ("clk: qcom: rcg2: Cache CFG register updates for
parked RCGs"). That's because the cached CFG register value needs to be
populated when the clk is registered. clk_rcg2_shared_enable() writes
the cached CFG register value 'parked_cfg'. This value is initially zero
due to static initializers. If a driver calls clk_enable() before
setting a rate or parent, it will set the parent to '0' which is
(almost?) always XO, and may not reflect the parent at registration. In
the worst case, this switches the RCG from sourcing a fast PLL to the
slow crystal speed.
The second problem is that the force enable bit isn't cleared. The force
enable bit is only used during parking and unparking of shared RCGs.
Otherwise it shouldn't be set because it keeps the RCG enabled even when
all the branches on the output of the RCG are disabled (the hardware has
a feedback mechanism so that any child branches keep the RCG enabled
when the branch enable bit is set). This problem wastes power if the clk
is unused, and is harmful in the case that the clk framework disables
the parent of the force enabled RCG. In the latter case, the GDSC the
shared RCG is associated with will get wedged if the RCG's source clk is
disabled and the GDSC tries to enable the RCG to do "housekeeping" while
powering on.
Both of these problems combined with incorrect runtime PM usage in the
display driver lead to a black screen on Qualcomm sc7180 Trogdor
chromebooks. What happens is that the bootloader leaves the
'disp_cc_mdss_rot_clk' enabled and the 'disp_cc_mdss_rot_clk_src' force
enabled and parented to 'disp_cc_pll0'. The mdss driver probes and
runtime suspends, disabling the mdss_gdsc which uses the
'disp_cc_mdss_rot_clk_src' for "housekeeping". The
'disp_cc_mdss_rot_clk' is disabled during late init because the clk is
unused, but the parent 'disp_cc_mdss_rot_clk_src' is still force enabled
because the force enable bit was never cleared. Then 'disp_cc_pll0' is
disabled because it is also unused. That's because the clk framework
believes the parent of the RCG is XO when it isn't. A child device of
the mdss device (e.g. DSI) runtime resumes mdss which powers on the
mdss_gdsc. This wedges the GDSC because 'disp_cc_mdss_rot_clk_src' is
parented to 'disp_cc_pll0' and that PLL is off. With the GDSC wedged,
mdss_runtime_resume() tries to enable 'disp_cc_mdss_mdp_clk' but it
can't because the GDSC has wedged all the clks associated with the GDSC
causing clks to stay stuck off.
This leads to the following warning seen at boot and a black screen
because the display driver fails to probe.
disp_cc_mdss_mdp_clk status stuck at 'off'
WARNING: CPU: 1 PID: 81 at drivers/clk/qcom/clk-branch.c:87 clk_branch_toggle+0x114/0x168
Modules linked in:
CPU: 1 PID: 81 Comm: kworker/u16:4 Not tainted 6.7.0-g0dd3ee311255 #1 f5757d475795053fd2ad52247a070cd50dd046f2
Hardware name: Google Lazor (rev1 - 2) with LTE (DT)
Workqueue: events_unbound deferred_probe_work_func
pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : clk_branch_toggle+0x114/0x168
lr : clk_branch_toggle+0x110/0x168
sp : ffffffc08084b670
pmr_save: 00000060
x29: ffffffc08084b680 x28: ffffff808006de00 x27: 0000000000000001
x26: ffffff8080dbd4f4 x25: 0000000000000000 x24: 0000000000000000
x23: 0000000000000000 x22: ffffffd838461198 x21: ffffffd838007997
x20: ffffffd837541d5c x19: 0000000000000001 x18: 0000000000000004
x17: 0000000000000000 x16: 0000000000000010 x15: ffffffd837070fac
x14: 0000000000000003 x13: 0000000000000004 x12: 0000000000000001
x11: c0000000ffffdfff x10: ffffffd838347aa0 x9 : 08dadf92e516c000
x8 : 08dadf92e516c000 x7 : 0000000000000000 x6 : 0000000000000027
x5 : ffffffd8385a61f2 x4 : 0000000000000000 x3 : ffffffc08084b398
x2 : ffffffc08084b3a0 x1 : 00000000ffffdfff x0 : 00000000fffffff0
Call trace:
clk_branch_toggle+0x114/0x168
clk_branch2_enable+0x24/0x30
clk_core_enable+0x5c/0x1c8
clk_enable+0x38/0x58
clk_bulk_enable+0x40/0xb0
mdss_runtime_resume+0x68/0x258
pm_generic_runtime_resume+0x30/0x44
__genpd_runtime_resume+0x30/0x80
genpd_runtime_resume+0x124/0x214
__rpm_callback+0x7c/0x15c
rpm_callback+0x30/0x88
rpm_resume+0x390/0x4d8
rpm_resume+0x43c/0x4d8
__pm_runtime_resume+0x54/0x98
__device_attach+0xe0/0x170
device_initial_probe+0x1c/0x28
bus_probe_device+0x48/0xa4
device_add+0x52c/0x6fc
mipi_dsi_device_register_full+0x104/0x1a8
devm_mipi_dsi_device_register_full+0x28/0x78
ti_sn_bridge_probe+0x1dc/0x2bc
auxiliary_bus_probe+0x4c/0x94
really_probe+0xf8/0x270
__driver_probe_device+0xa8/0x130
driver_probe_device+0x44/0x104
__device_attach_driver+0xa4/0xcc
bus_for_each_drv+0x94/0xe8
__device_attach+0xf8/0x170
device_initial_probe+0x1c/0x28
bus_probe_device+0x48/0xa4
deferred_probe_work_func+0x9c/0xd8
Fix these problems by parking shared RCGs at boot. This will properly
initialize the parked_cfg struct member so that the parent is reported
properly and ensure that the clk won't get stuck on or off because the
RCG is parented to the safe source (XO).
Fixes: 703db1f5da ("clk: qcom: rcg2: Cache CFG register updates for parked RCGs")
Reported-by: Stephen Boyd <sboyd@kernel.org>
Closes: https://lore.kernel.org/r/1290a5a0f7f584fcce722eeb2a1fd898.sboyd@kernel.org
Closes: https://issuetracker.google.com/319956935
Reported-by: Laura Nao <laura.nao@collabora.com>
Closes: https://lore.kernel.org/r/20231218091806.7155-1-laura.nao@collabora.com
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Taniya Das <quic_tdas@quicinc.com>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20240502224703.103150-1-swboyd@chromium.org
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Merge series from Elinor Montmasson <elinor.montmasson@savoirfairelinux.com>:
This is a series of patches aiming to make the machine driver
`fsl-asoc-card` compatible with S/PDIF controllers on imx boards. The
main goal is to allow the use of S/PDIF controllers with ASRC modules.
The `imx-spdif` machine driver already has specific support for S/PDIF
controllers but doesn't support using an ASRC with it. However, the
`fsl-asoc-card` machine driver has the necessary code to create a sound
card which can use an ASRC module.
It is then possible to extend the support for S/PDIF audio cards by
merging the `imx-spdif` driver into `fsl-asoc-card`.
The first three patches adapt the `fsl-asoc-card` driver to support
multiple codec use cases.
The driver can get 2 codec phandles from the device tree, and
codec-related variables are doubled.
`for_each_codecs` macros are also used when possible to ease adding
other multi-codec use cases in the future.
It makes possible to use the two S/PDIF dummy codec drivers
`spdif_receiver` and `spdif_transmitter` instead of `snd-soc-dummy`,
which was used in `imx-spdif`.
The fourth patch merges the S/PDIF support from `imx-spdif` to
`fsl-asoc-card`.
`fsl-asoc-card` offers the same functionalities as `imx-spdif` did, but
this merge also extends the S/PDIF support with the possibility of using
an ASRC.
Compatible "fsl,imx-audio-spdif" is kept, but `fsl-asoc-card` uses
different DT properties compared to `imx-spdif`:
* The "spdif-controller" property from `imx-spdif` is named "audio-cpu"
in `fsl-asoc-card`.
* `fsl-asoc-card` uses codecs explicitly declared in DT with
"audio-codec". With an S/PDIF, codec drivers `spdif_transmitter` and
`spdif_receiver` should be used. Driver `imx-spdif` used instead the
dummy codec and a pair of boolean properties, "spdif-in" and
"spdif-out".
Backward compatibility is therefore implemented in `fsl-asoc-card`.
However, it is recommended to use the new properties when needed.
Especially, declaring and using S/PDIF transmitter and/or receiver nodes
is better than using the dummy codec.
The last three patches update the device tree bindings of
`fsl-asoc-card` and update all in-tree device trees to use the
`fsl-asoc-card` properties.
Note that as the old properties are still supported:
* previous versions of in-tree device trees are still supported.
* out-of-tree device trees are still supported.
This series of patches was successfully built for arm64 and x86 on top
of the latest "for-next" branch of the ASoC git tree on the 26th of June
2024.
These modifications have also been tested on an i.MX8MN evaluation board
with a linux kernel RT v6.1.26-rt8.
If we fail to call crypto_sync_skcipher_setkey, we should free the
memory allocation for cipher, replace err_return with err_free_cipher
to free the memory of cipher.
Fixes: 4891f2d008 ("gss_krb5: import functionality to derive keys into the kernel")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
I recently found out about B: for noting where subsystem bugs can be
filed. I do pay attention to bugzilla.kernel.org. The Linux NFS
community has decided to steer kernel NFS issues to the kernel.org
bugzilla instead of bugzilla.linux-nfs.org.
Remove the W: entry; the sourceforge information is stale and
unmaintained.
Cc: Thorsten Leemhuis <linux@leemhuis.info>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Allow the pool_mode setting code to be called from internal callers
so we can call it from a new netlink op. Add a new svc_pool_map_get
function to return the current setting. Change the existing module
parameter handling to use the new interfaces under the hood.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Now that nfsd_svc can handle an array of thread counts, fix up the
netlink threads interface to construct one from the netlink call
and pass it through so we can start a pooled server the same way we
would start a normal one.
Note that any unspecified values in the array are considered zeroes,
so it's possible to shut down a pooled server by passing in a short
array that has only zeros, or even an empty array.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Now that the refcounting is fixed, rework nfsd_svc to use the same
thread setup as the pool_threads interface. Have it take an array of
thread counts instead of just a single value, and pass that from the
netlink threads set interface. Since the new netlink interface doesn't
have the same restriction as pool_threads, move the guard against
shutting down all threads to write_pool_threads.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Only pooled services take a reference to the svc_pool_map. The sunrpc
code has always used the sv_nrpools value to detect whether the service
is pooled.
The problem there is that nfsd is a pooled service, but when it's
running in "global" pool_mode, it doesn't take a reference to the pool
map because it has a sv_nrpools value of 1. This means that we have
two separate codepaths for starting the server, depending on whether
it's pooled or not.
Fix this by adding a new flag to the svc_serv, that indicates whether
the serv is pooled. With this we can have the nfsd service
unconditionally take a reference, regardless of pool_mode.
Note that this is a behavior change for
/sys/module/sunrpc/parameters/pool_mode. Usually this file does not
allow you to change the pool-mode while there are nfsd threads running,
but if the pool-mode is "global" it's allowed. My assumption is that
this is a bug, since it probably should never have worked this way.
This patch changes the behavior such that you get back EBUSY even
when nfsd is running in global mode. I think this is more reasonable
behavior, and given that most people set this today using the module
parameter, it's doubtful anyone will notice.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The trace point in svc_xprt_close() reports only some local close
requests. Try to capture more local close requests.
Note that "trace-cmd record -T -e sunrpc:svc_xprt_close" will
neatly capture the identity of the caller requesting the close.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
I noticed LAYOUTGET(LAYOUTIOMODE4_RW) returning NFS4ERR_ACCESS
unexpectedly. The NFS client had created a file with mode 0444, and
the server had returned a write delegation on the OPEN(CREATE). The
client was requesting a RW layout using the write delegation stateid
so that it could flush file modifications.
Creating a read-only file does not seem to be problematic for
NFSv4.1 without pNFS, so I began looking at NFSD's implementation of
LAYOUTGET.
The failure was because fh_verify() was doing a permission check as
part of verifying the FH presented during the LAYOUTGET. It uses the
loga_iomode value to specify the @accmode argument to fh_verify().
fh_verify(MAY_WRITE) on a file whose mode is 0444 fails with -EACCES.
To permit LAYOUT* operations in this case, add OWNER_OVERRIDE when
checking the access permission of the incoming file handle for
LAYOUTGET and LAYOUTCOMMIT.
Cc: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org # v6.6+
Message-Id: 4E9C0D74-A06D-4DC3-A48A-73034DC40395@oracle.com
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works
for that purpose for now).
Let's correct the old usages of *-objs in Makefiles.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Since CONFIG_NFSD_LEGACY_CLIENT_TRACKING is a new config option, its
initial default setting should have been Y (if we are to follow the
common practice of "default Y, wait, default N, wait, remove code").
Paul also suggested adding a clearer remedy action to the warning
message.
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Message-Id: <d2ab4ee7-ba0f-44ac-b921-90c8fa5a04d2@molgen.mpg.de>
Fixes: 74fd48739d ("nfsd: new Kconfig option for legacy client tracking")
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Sagi tells me that when a bonded device reports an address change,
the consumer must destroy its listener IDs and create new ones.
See commit a032e4f6d6 ("nvmet-rdma: fix bonding failover possible
NULL deref").
Suggested-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
In a moment, I will add a second consumer of CMA ID creation in
svcrdma. Refactor so this code can be reused.
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
'nfsd3_voidargs' in nfs[23]acl.c is unused since
commit 788f7183fb ("NFSD: Add common helpers to decode void args and
encode void results").
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
These lengths come from xdr_stream_decode_u32() and so we should be a
bit careful with them. Use size_add() and struct_size() to avoid
integer overflows. Saving size_add()/struct_size() results to a u32 is
unsafe because it truncates away the high bits.
Also generally storing sizes in longs is safer. Most systems these days
use 64 bit CPUs. It's harder for an addition to overflow 64 bits than
it is to overflow 32 bits. Also functions like vmalloc() can
successfully allocate UINT_MAX bytes, but nothing can allocate ULONG_MAX
bytes.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
This adds clock controllers for SM7150 camera, display and video,
QCM2290 GPU, QCS8386/QCS8084 NSS, SM8650 camera and video.
qcom_cc_really_probe() is transitioned to take a struct device, to allow
reuse in non-platform-drivers. Prepare-only branch clock ops are
introduced to support clocks on buses that takes locks.
The parent/child relationship for SC7280 camera GDSCs are added.
Support for the Huayra 2290 alpha PLL is added.
The highest SDCC clock frequency on IPQ6018 is adjusted to match the
HS200 support. For IPQ9574 missing PCIe PIPE clocks are added.
Various configuration and properties of the SA8775P, X1E80100 and SM7280
clocks and GDSCs are corrected. SM8350 GPU RCGs are made to park on XO
while disabled.
Unused CONFIG_QCOM_RPMCC Kconfig symbol is removed, and missing
MODULE_DESCRIPTIONs are added in a few drivers.
-----BEGIN PGP SIGNATURE-----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=jddZ
-----END PGP SIGNATURE-----
Merge tag 'qcom-clk-for-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into clk-qcom
Pull Qualcomm clk driver updates from Bjorn Andersson:
- Add clk drivers for Qualcomm SM7150 camera, display and video
- Add Qualcomm QCM2290 GPU clk driver
- Add Qualcomm QCS8386/QCS8084 NSS clk driver
- Add Qualcomm SM8650 camera and video drivers
- Make qcom_cc_really_probe() take a struct device to allow reuse in
non-platform-drivers
- Introduce prepare-only branch clock ops in the qcom clk driver to
support clocks on buses that take locks
- Describe parent/child relationship for Qualcomm SC7280 camera GDSCs
- Support Qualcomm Huayra 2290 alpha PLL
- Adjust the highest SDCC clock frequency on Qualcomm IPQ6018 to match
HS200 support
- Add missing PCIe PIPE clocks on Qualcomm IPQ9574
- Fix various configurations and properties in the Qualcomm SA8775P,
X1E80100 and SM7280 drivers
- Park Qualcomm SM8350 GPU RCGs on XO while disabled
- Remove unused CONFIG_QCOM_RPMCC Kconfig symbol
- Add missing MODULE_DESCRIPTIONs to some qcom clk drivers
* tag 'qcom-clk-for-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (61 commits)
clk: qcom: gcc-x1e80100: Fix halt_check for all pipe clocks
clk: qcom: gcc-ipq6018: update sdcc max clock frequency
clk: qcom: camcc-sm8650: Add SM8650 camera clock controller driver
dt-bindings: clock: qcom: Add SM8650 camera clock controller
dt-bindings: clock: qcom: Update the order of SC8280XP camcc header
clk: qcom: videocc-sm8550: Add SM8650 video clock controller
clk: qcom: videocc-sm8550: Add support for videocc XO clk ares
dt-bindings: clock: qcom: Add SM8650 video clock controller
dt-bindings: clock: qcom: Update SM8450 videocc header file name
clk: qcom: gpucc-sa8775p: Update wait_val fields for GPU GDSC's
clk: qcom: gpucc-sa8775p: Park RCG's clk source at XO during disable
clk: qcom: gpucc-sa8775p: Remove the CLK_IS_CRITICAL and ALWAYS_ON flags
clk: qcom: gcc-sa8775p: Set FORCE_MEM_CORE_ON for gcc_ufs_phy_ice_core_clk
clk: qcom: gcc-sa8775p: Update the GDSC wait_val fields and flags
clk: qcom: gcc-sa8775p: Remove support for UFS hw ctl clocks
clk: qcom: gpucc-sm8350: Park RCG's clk source at XO during disable
clk: qcom: nsscc-qca8k: Fix the MDIO functions undefined issue
clk: qcom: select right config in CLK_QCM2290_GPUCC definition
clk: qcom: Remove QCOM_RPMCC symbol
clk: qcom: Add QCM2290 GPU clock controller driver
...
When NFS requests are split into sub-requests, nfs_inode_remove_request
calls nfs_page_group_sync_on_bit to set PG_REMOVE on this sub-request and
only completes the head requests once PG_REMOVE is set on all requests.
This means that when nfs_lock_and_join_requests sees a PG_REMOVE bit, I/O
on the request is in progress and has partially completed. If such a
request is returned to nfs_try_to_update_request, it could be extended
with the newly dirtied region and I/O for the combined range will be
re-scheduled, leading to extra I/O.
Change the logic to instead restart the search for a request when any
PG_REMOVE bit is set, as the completion handler will remove the request
as soon as it can take the page group lock. This not only avoid
extending the I/O but also does the right thing for the callers that
want to cancel or flush the request.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
nfs_wait_on_request is now only used in write.c. Move it there
and mark it static.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Fold nfs_page_group_lock_subrequests into nfs_lock_and_join_requests to
prepare for future changes to this code, and move the helpers to write.c
as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Fold nfs_folio_find_and_lock_request into the only caller to prepare
for changes to this code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
nfs_folio_find_and_lock_request and the nfs_page_group_lock_head helper
called by it spend quite some effort to deal with head vs subrequests.
But given that only the head request can be stashed in the folio private
data, non of that is required.
Fold the locking logic from nfs_page_group_lock_head into
nfs_folio_find_and_lock_request and simplify the result based on the
invariant that we always find the head request in the folio private data.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
nfs_folio_private_request is a trivial wrapper around, which itself has
fallen out of favor and has been replaced with plain ->private
dereferences in recent folio conversions. Do the same for nfs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Remove the code testing folio_test_swapcache either explicitly or
implicitly in pagemap.h headers, as is now handled using the direct I/O
path and not the buffered I/O path that these helpers are located in.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Previously in order to mark the communication with the DS server,
we tried to use NFS_CS_DS in cl_flags. However, this flag would
only be saved for the DS server and in case where DS equals MDS,
the client would not find a matching nfs_client in nfs_match_client
that represents the MDS (but is also a DS).
Instead, don't rely on the NFS_CS_DS but instead use NFS_CS_PNFS.
Fixes: 379e4adfdd ("NFSv4.1: fixup use EXCHGID4_FLAG_USE_PNFS_DS for DS server")
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Commit 6df25e5853 ("nfs: remove reliance on bdi congestion")
introduced NFS-private solution for limiting number of writes
outstanding against a particular server. Unlike previous bdi congestion
this algorithm actually works and limits number of outstanding writeback
pages to nfs_congestion_kb which scales with amount of client's memory
and is capped at 256 MB. As a result some workloads such as random
buffered writes over NFS got slower (from ~170 MB/s to ~126 MB/s). The
fio command to reproduce is:
fio --direct=0 --ioengine=sync --thread --invalidate=1 --group_reporting=1
--runtime=300 --fallocate=posix --ramp_time=10 --new_group --rw=randwrite
--size=64256m --numjobs=4 --bs=4k --fsync_on_close=1 --end_fsync=1
This happens because the client sends ~256 MB worth of dirty pages to
the server and any further background writeback request is ignored until
the number of writeback pages gets below the threshold of 192 MB. By the
time this happens and clients decides to trigger another round of
writeback, the server often has no pages to write and the disk is idle.
To fix this problem and make the client react faster to eased congestion
of the server by blocking waiting for congestion to resolve instead of
aborting writeback. This improves the random 4k buffered write
throughput to 184 MB/s.
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Atomic types should better be initialized with atomic_long_set() instead
of relying on zeroing done by kzalloc(). Clean this up.
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jan Kara <jack@suse.cz>
Acked-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
nfss->writeback is updated only when we are ending page writeback and at
that moment we also clear nfss->write_congested. So there's no point in
rechecking congestion state in nfs_commit_release_pages(). Drop the
pointless check.
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
An administrator cannot take action on these messages, but the
reported errors might be helpful for troubleshooting. Transition
them to trace points so these events appear in the trace log and
can be easily lined up with other traced NFS client operations.
Examples:
append_writer-6147 [000] 80.247393: bl_pr_key_reg: dev=8,0 (sda) key=0x6675bfcf59112e98
append_writer-6147 [000] 80.247842: bl_pr_key_unreg: dev=8,0 (sda) key=0x6675bfcf59112e98
umount.nfs4-6172 [002] 84.950409: bl_pr_key_unreg_err: dev=8,0 (sda) key=0x6675bfcf59112e98 status=RESERVATION_CONFLICT
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Since commit f931d8374c ("nfs/blocklayout: refactor block device
opening"), an error is reported when no multi-path device is found.
But this isn't a fatal error if the subsequent device open is
successful. On systems without multi-path devices, this message
always appears whether there is a problem or not.
Instead, generate less system journal noise by reporting an error
only when both open attempts fail. The new error message is more
actionable since it indicates that there is a real configuration
issue to be addressed.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
During generic/069 runs with pNFS SCSI layouts, the NFS client emits
the following in the system journal:
kernel: pNFS: failed to open device /dev/disk/by-id/dm-uuid-mpath-0x6001405e3366f045b7949eb8e4540b51 (-2)
kernel: pNFS: using block device sdb (reservation key 0x666b60901e7b26b3)
kernel: pNFS: failed to open device /dev/disk/by-id/dm-uuid-mpath-0x6001405e3366f045b7949eb8e4540b51 (-2)
kernel: pNFS: using block device sdb (reservation key 0x666b60901e7b26b3)
kernel: sd 6:0:0:1: reservation conflict
kernel: sd 6:0:0:1: [sdb] tag#16 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
kernel: sd 6:0:0:1: [sdb] tag#16 CDB: Write(10) 2a 00 00 00 00 50 00 00 08 00
kernel: reservation conflict error, dev sdb, sector 80 op 0x1:(WRITE) flags 0x0 phys_seg 1 prio class 2
kernel: sd 6:0:0:1: reservation conflict
kernel: sd 6:0:0:1: reservation conflict
kernel: sd 6:0:0:1: [sdb] tag#18 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
kernel: sd 6:0:0:1: [sdb] tag#17 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
kernel: sd 6:0:0:1: [sdb] tag#18 CDB: Write(10) 2a 00 00 00 00 60 00 00 08 00
kernel: sd 6:0:0:1: [sdb] tag#17 CDB: Write(10) 2a 00 00 00 00 58 00 00 08 00
kernel: reservation conflict error, dev sdb, sector 96 op 0x1:(WRITE) flags 0x0 phys_seg 1 prio class 0
kernel: reservation conflict error, dev sdb, sector 88 op 0x1:(WRITE) flags 0x0 phys_seg 1 prio class 0
systemd[1]: fstests-generic-069.scope: Deactivated successfully.
systemd[1]: fstests-generic-069.scope: Consumed 5.092s CPU time.
systemd[1]: media-test.mount: Deactivated successfully.
systemd[1]: media-scratch.mount: Deactivated successfully.
kernel: sd 6:0:0:1: reservation conflict
kernel: failed to unregister PR key.
This appears to be due to a race. bl_alloc_lseg() calls this:
561 static struct nfs4_deviceid_node *
562 bl_find_get_deviceid(struct nfs_server *server,
563 const struct nfs4_deviceid *id, const struct cred *cred,
564 gfp_t gfp_mask)
565 {
566 struct nfs4_deviceid_node *node;
567 unsigned long start, end;
568
569 retry:
570 node = nfs4_find_get_deviceid(server, id, cred, gfp_mask);
571 if (!node)
572 return ERR_PTR(-ENODEV);
nfs4_find_get_deviceid() does a lookup without the spin lock first.
If it can't find a matching deviceid, it creates a new device_info
(which calls bl_alloc_deviceid_node, and that registers the device's
PR key).
Then it takes the nfs4_deviceid_lock and looks up the deviceid again.
If it finds it this time, bl_find_get_deviceid() frees the spare
(new) device_info, which unregisters the PR key for the same device.
Any subsequent I/O from this client on that device gets EBADE.
The umount later unregisters the device's PR key again.
To prevent this problem, register the PR key after the deviceid_node
lookup.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Some pNFS implementations, such as flexible files, want the client to
send the layout stats and layout errors that may have incurred while the
metadata server was booting. To do so, the client sends a layoutreturn
with an all-zero stateid while the server is in grace during reboot
recovery.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The layout will be automatically unhashed on final release of the
reference count.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
