The "pinctrl-single,input-schmitt" have four arguments in the bindings
but the driver needs two. According to the meaning of other properties
and driver, it should have "enable" suffix. Fortunately, there is no
dts using this property, so it is safe to correct this property with the
right name.
Rename existed property "pinctrl-single,input-schmitt" to
"pinctrl-single,input-schmitt-enable" and add the right description for
property "pinctrl-single,input-schmitt" used by the driver.
Fixes: 677a62482b ("dt-bindings: pinctrl: Update pinctrl-single to use yaml")
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/IA1PR20MB4953D5E7D7D68DDCE31C0031BBCF2@IA1PR20MB4953.namprd20.prod.outlook.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Use scope based of_node_put() cleanup to simplify code.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/20240627131721.678727-4-peng.fan@oss.nxp.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Use scope based of_node_put() cleanup to simplify code.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/20240627131721.678727-3-peng.fan@oss.nxp.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Use scope based of_node_put() cleanup to simplify code.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/20240627131721.678727-2-peng.fan@oss.nxp.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Change CS35L56_MAIN_RENDER_USER_VOLUME_MAX to 48, to limit the maximum
value of the Speaker Volume control to +12dB. The minimum value is
unchanged so that the default 0dB has the same integer control value.
The original maximum of 400 (+100dB) was the largest value that can be
mathematically handled by the DSP. The actual maximum amplification is
+12dB.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20240703095517.208077-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The "Speaker Volume" control was being defined using four hardcoded magic
numbers. There are #defines in the cs35l56.h header for these numbers, so
change the code to use the defined constants.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20240703095517.208077-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
arch/s390/include/asm/kvm_host.h includes linux/kvm_host.h, but
linux/kvm_host.h includes asm/kvm_host.h .
It turns out that arch/s390/include/asm/kvm_host.h only needs
linux/kvm_types.h, which it already includes.
Stop including linux/kvm_host.h from arch/s390/include/asm/kvm_host.h .
Due to the #ifdef guards, the code works as it is today, but it's ugly
and it will get in the way of future patches.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Nico Boehr <nrb@linux.ibm.com>
Link: https://lore.kernel.org/r/20240702155606.71398-1-imbrenda@linux.ibm.com
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-ID: <20240702155606.71398-1-imbrenda@linux.ibm.com>
When BHI mitigation is enabled, if SYSENTER is invoked with the TF flag set
then entry_SYSENTER_compat() uses CLEAR_BRANCH_HISTORY and calls the
clear_bhb_loop() before the TF flag is cleared. This causes the #DB handler
(exc_debug_kernel()) to issue a warning because single-step is used outside the
entry_SYSENTER_compat() function.
To address this issue, entry_SYSENTER_compat() should use CLEAR_BRANCH_HISTORY
after making sure the TF flag is cleared.
The problem can be reproduced with the following sequence:
$ cat sysenter_step.c
int main()
{ asm("pushf; pop %ax; bts $8,%ax; push %ax; popf; sysenter"); }
$ gcc -o sysenter_step sysenter_step.c
$ ./sysenter_step
Segmentation fault (core dumped)
The program is expected to crash, and the #DB handler will issue a warning.
Kernel log:
WARNING: CPU: 27 PID: 7000 at arch/x86/kernel/traps.c:1009 exc_debug_kernel+0xd2/0x160
...
RIP: 0010:exc_debug_kernel+0xd2/0x160
...
Call Trace:
<#DB>
? show_regs+0x68/0x80
? __warn+0x8c/0x140
? exc_debug_kernel+0xd2/0x160
? report_bug+0x175/0x1a0
? handle_bug+0x44/0x90
? exc_invalid_op+0x1c/0x70
? asm_exc_invalid_op+0x1f/0x30
? exc_debug_kernel+0xd2/0x160
exc_debug+0x43/0x50
asm_exc_debug+0x1e/0x40
RIP: 0010:clear_bhb_loop+0x0/0xb0
...
</#DB>
<TASK>
? entry_SYSENTER_compat_after_hwframe+0x6e/0x8d
</TASK>
[ bp: Massage commit message. ]
Fixes: 7390db8aea ("x86/bhi: Add support for clearing branch history at syscall entry")
Reported-by: Suman Maity <suman.m.maity@oracle.com>
Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/20240524070459.3674025-1-alexandre.chartre@oracle.com
In the previous review cycle the regmap cache update code was
questioned since it seems and odd way of using regmap_update_bits().
Thus update the regmap cache modification code to better explain
what it does and why it's done. This is no functional change, but
it's improving code maintainability.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Link: https://lore.kernel.org/20240626084525.787298-2-patrick.rudolph@9elements.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
With ARCH=um, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in fs/hostfs/hostfs.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://patch.msgid.link/20240702-md-um-fs-hostfs-v1-1-fd2b565027e7@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
With ARCH=um, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in arch/um/drivers/harddog.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://patch.msgid.link/20240702-md-um-arch-um-drivers-v1-1-79e4f50b5bab@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
With external time travel, a LOT of message can end up
being exchanged on the socket, taking a significant
amount of time just to do that.
Add a new shared memory optimisation to that, where a
number of changes are made:
- the controller sends a client ID and a shared memory FD
(and a logging FD we don't use) in the ACK message to
the initial START
- the shared memory holds the current time and the
free_until value, so that there's no need to exchange
messages for that
- if the client that's running has shared memory support,
any client (the running one included) can request the
next time it wants to run inside the shared memory,
rather than sending a message, by also updating the
free_until value
- when shared memory is enabled, RUN/WAIT messages no
longer have an ACK, further cutting down on messages
Together, this can reduce the number of messages very
significantly, and reduce overall test/simulation run time.
Co-developed-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Link: https://patch.msgid.link/20240702192118.6ad0a083f574.Ie41206c8ce4507fe26b991937f47e86c24ca7a31@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add a message type to the time-travel protocol to broadcast
a small (64-bit) value to all participants in a simulation.
The main use case is to have an identical message come to
all participants in a simulation, e.g. to separate out logs
for different tests running in a single simulation.
Down in the guts of time_travel_handle_message() we can't
use printk() and not even printk_deferred(), so just store
the message and print it at the start of the userspace()
function.
Unfortunately this means that other prints in the kernel
can actually bypass the message, but in most cases where
this is used, for example to separate test logs, userspace
will be involved. Also, even if we could use
printk_deferred(), we'd still need to flush it out in the
userspace() function since otherwise userspace messages
might cross it.
As a result, this is a reasonable compromise, there's no
need to have any core changes and it solves the main use
case we have for it.
Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Link: https://patch.msgid.link/20240702192118.c4093bc5b15e.I2ca8d006b67feeb866ac2017af7b741c9e06445a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Dedicated caches are available for fixed size allocations via
kmem_cache_alloc(), but for dynamically sized allocations there is only
the global kmalloc API's set of buckets available. This means it isn't
possible to separate specific sets of dynamically sized allocations into
a separate collection of caches.
This leads to a use-after-free exploitation weakness in the Linux
kernel since many heap memory spraying/grooming attacks depend on using
userspace-controllable dynamically sized allocations to collide with
fixed size allocations that end up in same cache.
While CONFIG_RANDOM_KMALLOC_CACHES provides a probabilistic defense
against these kinds of "type confusion" attacks, including for fixed
same-size heap objects, we can create a complementary deterministic
defense for dynamically sized allocations that are directly user
controlled. Addressing these cases is limited in scope, so isolating these
kinds of interfaces will not become an unbounded game of whack-a-mole. For
example, many pass through memdup_user(), making isolation there very
effective.
In order to isolate user-controllable dynamically-sized
allocations from the common system kmalloc allocations, introduce
kmem_buckets_create(), which behaves like kmem_cache_create(). Introduce
kmem_buckets_alloc(), which behaves like kmem_cache_alloc(). Introduce
kmem_buckets_alloc_track_caller() for where caller tracking is
needed. Introduce kmem_buckets_valloc() for cases where vmalloc fallback
is needed. Note that these caches are specifically flagged with
SLAB_NO_MERGE, since merging would defeat the entire purpose of the
mitigation.
This can also be used in the future to extend allocation profiling's use
of code tagging to implement per-caller allocation cache isolation[1]
even for dynamic allocations.
Memory allocation pinning[2] is still needed to plug the Use-After-Free
cross-allocator weakness (where attackers can arrange to free an
entire slab page and have it reallocated to a different cache),
but that is an existing and separate issue which is complementary
to this improvement. Development continues for that feature via the
SLAB_VIRTUAL[3] series (which could also provide guard pages -- another
complementary improvement).
Link: https://lore.kernel.org/lkml/202402211449.401382D2AF@keescook [1]
Link: https://googleprojectzero.blogspot.com/2021/10/how-simple-linux-kernel-memory.html [2]
Link: https://lore.kernel.org/lkml/20230915105933.495735-1-matteorizzo@google.com/ [3]
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Plumb kmem_buckets arguments through kvmalloc_node_noprof() so it is
possible to provide an API to perform kvmalloc-style allocations with
a particular set of buckets. Introduce kvmalloc_buckets_node() that takes a
kmem_buckets argument.
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Introduce CONFIG_SLAB_BUCKETS which provides the infrastructure to
support separated kmalloc buckets (in the following kmem_buckets_create()
patches and future codetag-based separation). Since this will provide
a mitigation for a very common case of exploits, it is recommended to
enable this feature for general purpose distros. By default, the new
Kconfig will be enabled if CONFIG_SLAB_FREELIST_HARDENED is enabled (and
it is added to the hardening.config Kconfig fragment).
To be able to choose which buckets to allocate from, make the buckets
available to the internal kmalloc interfaces by adding them as the
second argument, rather than depending on the buckets being chosen from
the fixed set of global buckets. Where the bucket is not available,
pass NULL, which means "use the default system kmalloc bucket set"
(the prior existing behavior), as implemented in kmalloc_slab().
To avoid adding the extra argument when !CONFIG_SLAB_BUCKETS, only the
top-level macros and static inlines use the buckets argument (where
they are stripped out and compiled out respectively). The actual extern
functions can then be built without the argument, and the internals
fall back to the global kmalloc buckets unconditionally.
Co-developed-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Encapsulate the concept of a single set of kmem_caches that are used
for the kmalloc size buckets. Redefine kmalloc_caches as an array
of these buckets (for the different global cache buckets).
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
dev_t is a kernel type and may have different definitions
in kernel and userspace. On 32-bit x86 this currently makes
the stat structure being 4 bytes longer in the user code,
causing stack corruption.
However, this is (potentially) not the only problem, since
dev_t is a different type on user/kernel side, so we don't
know that the major/minor encoding isn't also different.
Decode/encode it instead to address both problems.
Cc: stable@vger.kernel.org
Fixes: 74ce793bcb ("hostfs: Fix ephemeral inodes")
Link: https://patch.msgid.link/20240702092440.acc960585dd5.Id0767e12f562a69c6cd3c3262dc3d765db350cf6@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Slab allocators have been guaranteeing natural alignment for
power-of-two sizes since commit 59bb47985c ("mm, sl[aou]b: guarantee
natural alignment for kmalloc(power-of-two)"), while any other sizes are
guaranteed to be aligned only to ARCH_KMALLOC_MINALIGN bytes (although
in practice are aligned more than that in non-debug scenarios).
Rust's allocator API specifies size and alignment per allocation, which
have to satisfy the following rules, per Alice Ryhl [1]:
1. The alignment is a power of two.
2. The size is non-zero.
3. When you round up the size to the next multiple of the alignment,
then it must not overflow the signed type isize / ssize_t.
In order to map this to kmalloc()'s guarantees, some requested
allocation sizes have to be padded to the next power-of-two size [2].
For example, an allocation of size 96 and alignment of 32 will be padded
to an allocation of size 128, because the existing kmalloc-96 bucket
doesn't guarantee alignent above ARCH_KMALLOC_MINALIGN. Without slab
debugging active, the layout of the kmalloc-96 slabs however naturally
align the objects to 32 bytes, so extending the size to 128 bytes is
wasteful.
To improve the situation we can extend the kmalloc() alignment
guarantees in a way that
1) doesn't change the current slab layout (and thus does not increase
internal fragmentation) when slab debugging is not active
2) reduces waste in the Rust allocator use case
3) is a superset of the current guarantee for power-of-two sizes.
The extended guarantee is that alignment is at least the largest
power-of-two divisor of the requested size. For power-of-two sizes the
largest divisor is the size itself, but let's keep this case documented
separately for clarity.
For current kmalloc size buckets, it means kmalloc-96 will guarantee
alignment of 32 bytes and kmalloc-196 will guarantee 64 bytes.
This covers the rules 1 and 2 above of Rust's API as long as the size is
a multiple of the alignment. The Rust layer should now only need to
round up the size to the next multiple if it isn't, while enforcing the
rule 3.
Implementation-wise, this changes the alignment calculation in
create_boot_cache(). While at it also do the calulation only for caches
with the SLAB_KMALLOC flag, because the function is also used to create
the initial kmem_cache and kmem_cache_node caches, where no alignment
guarantee is necessary.
In the Rust allocator's krealloc_aligned(), remove the code that padded
sizes to the next power of two (suggested by Alice Ryhl) as it's no
longer necessary with the new guarantees.
Reported-by: Alice Ryhl <aliceryhl@google.com>
Reported-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/all/CAH5fLggjrbdUuT-H-5vbQfMazjRDpp2%2Bk3%3DYhPyS17ezEqxwcw@mail.gmail.com/ [1]
Link: https://lore.kernel.org/all/CAH5fLghsZRemYUwVvhk77o6y1foqnCeDzW4WZv6ScEWna2+_jw@mail.gmail.com/ [2]
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Current calculation of max_low_pfn is introduced in commit af84eab208
("[PATCH] uml: fix LVM crash"). It is intended to set max_low_pfn to the
same value as max_pfn.
But I am not sure why the max_pfn is set to totalram_pages, which
represents the number of usable pages in system instead of an absolute
page frame number. (The change history stops there.)
While we have already calculate it in setup_physmem(), so not necessary
to do it again.
Also this would help changing totalram_pages accounting, since we plan
to move the accounting into __free_pages_core(). With this change,
totalram_pages may not represent the total usable pages at this point,
since some pages would be deferred initialized.
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
CC: Jeff Dike <jdike@linux.intel.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Cc: Alasdair G Kergon <agk@redhat.com>
CC: Andrew Morton <akpm@linux-foundation.org>
CC: Mike Rapoport (IBM) <rppt@kernel.org>
CC: David Hildenbrand <david@redhat.com>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Link: https://patch.msgid.link/20240615034150.2958-1-richard.weiyang@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
At present, Rust in the kernel only supports 64-bit x86, so UML has
followed suit. However, it's significantly easier to support 32-bit i386
on UML than on bare metal, as UML does not use the -mregparm option
(which alters the ABI), which is not yet supported by rustc[1].
Add support for CONFIG_RUST on um/i386, by adding a new target config to
generate_rust_target, and replacing various checks on CONFIG_X86_64 to
also support CONFIG_X86_32.
We still use generate_rust_target, rather than a built-in rustc target,
in order to match x86_64, provide a future place for -mregparm, and more
easily disable floating point instructions.
With these changes, the KUnit tests pass with:
kunit.py run --make_options LLVM=1 --kconfig_add CONFIG_RUST=y
--kconfig_add CONFIG_64BIT=n --kconfig_add CONFIG_FORTIFY_SOURCE=n
An earlier version of these changes was proposed on the Rust-for-Linux
github[2].
[1]: https://github.com/rust-lang/rust/issues/116972
[2]: https://github.com/Rust-for-Linux/linux/pull/966
Signed-off-by: David Gow <davidgow@google.com>
Link: https://patch.msgid.link/20240604224052.3138504-1-davidgow@google.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The Rust compiler can take a target config from 'target.json', which is
generated by scripts/generate_rust_target.rs. It used to be that all
Linux architectures used this to generate a target.json, but now
architectures must opt-in to this, or they will default to the Rust
compiler's built-in target definition.
This is mostly okay for (64-bit) x86 and UML, except that it can
generate SSE instructions, which we can't use in the kernel. So
re-instate the custom target.json, which disables SSE (and generally
enables the 'soft-float' feature). This fixes the following compile
error:
error: <unknown>:0:0: in function _RNvMNtCs5QSdWC790r4_4core3f32f7next_up float (float): SSE register return with SSE disabled
Fixes: f82811e22b ("rust: Refactor the build target to allow the use of builtin targets")
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Tested-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://patch.msgid.link/20240529093336.4075206-1-davidgow@google.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently /proc/sysemu will never be registered, as sysemu_supported
is initialized to zero implicitly and no code updates it. And there is
also nothing to configure via sysemu in UML anymore.
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Link: https://patch.msgid.link/20240527134024.1539848-3-tiwei.btw@antgroup.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Commit fb5d1d389c ("ubd: open the backing files in ubd_add")
removed the last use of ubd_mutex.
Remove it.
Build and kernel startup test only.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20240505001508.255096-1-linux@treblig.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In a future patch HAS_IOPORT=n will disable inb()/outb() and friends at
compile time. UML supports these via its UML_IOMEM_EMULATION so let that
select HAS_IOPORT and also reflect this in NO_IOPORT_MAP.
Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Link: https://patch.msgid.link/20240403124300.65379-2-schnelle@linux.ibm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Remove the pcap driver in UML. It is obsolete. It does not build on
recent systems due to changes in libpcap and its dependencies.
The vector driver's raw transport in UML provides identical
functionality.
Signed-off-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Link: https://patch.msgid.link/20240328132424.376456-1-anton.ivanov@cambridgegreys.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When in time-travel mode (infinite-cpu or external) time should not pass
for writing to the console. As such, it makes sense to put the FD for
the output side into blocking mode and simply let any write to it hang.
If we did not do this, then time could pass waiting for the console to
become writable again. This is not desirable as it has random effects on
the clock between runs.
Implement this by duplicating the FD if output is active in a relevant
mode and setting the duplicate to be blocking. This avoids changing the
input channel to be blocking should it exists. After this, use the
blocking FD for all write operations and do not allocate an IRQ it is
set.
Without time-travel mode fd_out will always match fd_in and IRQs are
registered.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://patch.msgid.link/20231018123643.1255813-4-benjamin@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In the next commit, we are going to set the output FD to be blocking.
Once that is done, the write() may be short if an interrupt happens
while it is writing out data. As such, to properly catch an EINTR error,
we need to retry the write.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://patch.msgid.link/20231018123643.1255813-3-benjamin@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If the read/write function returns an error then we expect to see an
event/IRQ later on. However, this will only happen after an EAGAIN as we
are using edge based event triggering.
As such, EINTR needs to be caught should it happen.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://patch.msgid.link/20231018123643.1255813-2-benjamin@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When in time-travel mode, the eventfd events are read even when signals
are blocked as SIGIO still needs to be processed. In this case, the
event is cleared on the eventfd but the IRQ still needs to be fired
later.
We did already ensure that the SIGIO handler is run again. However, the
FDs are configured to be level triggered, so that eventfd will not
notify again. As such, add some logic to mark the IRQ as pending and
process it at the next opportunity.
To avoid duplication, reuse the logic used for the suspend/resume case.
This does not really change anything except for delaying running the
IRQs with timetravel_handler at a slightly later point in time (and
possibly running non-timetravel IRQs that shouldn't happen earlier).
While at it, move marking as pending into irq_event_handler as that is
the more logical place for it to happen.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://patch.msgid.link/20231018123643.1255813-1-benjamin@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The processing of a Transfer-In-Channel (TIC) CCW requires locating
the target of the CCW in the channel program, and updating the
address to reflect what will actually be sent to hardware.
An error exists where the 64-bit virtual address is truncated to
32-bits (variable "cda") when performing this math. Since s390
addresses of that size are 31-bits, this leaves that additional
bit enabled such that the resulting I/O triggers a channel
program check. This shows up occasionally when booting a KVM
guest from a passthrough DASD device:
..snip...
Interrupt Response Block Data:
: 0x0000000000003990
Function Ctrl : [Start]
Activity Ctrl :
Status Ctrl : [Alert] [Primary] [Secondary] [Status-Pending]
Device Status :
Channel Status : [Program-Check]
cpa=: 0x00000000008d0018
prev_ccw=: 0x0000000000000000
this_ccw=: 0x0000000000000000
...snip...
dasd-ipl: Failed to run IPL1 channel program
The channel program address of "0x008d0018" in the IRB doesn't
look wrong, but tracing the CCWs shows the offending bit enabled:
ccw=0x0000012e808d0000 cda=00a0b030
ccw=0x0000012e808d0008 cda=00a0b038
ccw=0x0000012e808d0010 cda=808d0008
ccw=0x0000012e808d0018 cda=00a0b040
Fix the calculation of the TIC CCW's data address such that it points
to a valid 31-bit address regardless of the input address.
Fixes: bd36cfbbb9 ("s390/vfio_ccw_cp: use new address translation helpers")
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/r/20240628163738.3643513-1-farman@linux.ibm.com
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Add compatible string for chip ls1046 to fix below warning.
arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dtb: /soc/gpio@2300000: failed to match any schema with compatible: ['fsl,ls1046a-gpio', 'fsl,qoriq-gpio']
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240702201724.96681-1-Frank.Li@nxp.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The ONSemi N24S64B is a 64 KBit serial EEPROM that is compatible
with atmel,24c64.
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240702103155.321855-3-frieder@fris.de
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Merge the compatibles for the 24c16 types into a single list.
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240702103155.321855-2-frieder@fris.de
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Add "microchip,24aa025e48", "microchip,24aa025e64" compatible for the
usage w/ 24AA025E{48, 64} type of EEPROMs where "24aa025e48" stands
for EUI-48 address and "24aa025e64" stands for EUI-64 address.
[andrei.simion@microchip.com: Use AT24_DATA_CHIP with AT24_FLAG_READONLY for
24AA025E{48, 64} type of EEPROMs. Reword commit message.]
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Andrei Simion <andrei.simion@microchip.com>
Link: https://lore.kernel.org/r/20240703084704.197697-2-andrei.simion@microchip.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Replace the fixed regulator for USB VBUS and use the proper one that
controls regulator based on VBUS detection.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240702180032.207275-5-biju.das.jz@bp.renesas.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Use regulator_hardware_enable() for controlling VBUS enable for
RZ/G2L alike SoCs in interrupt context.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20240702180032.207275-4-biju.das.jz@bp.renesas.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
As per RZ/G2L HW manual, VBUS enable can be controlled by the VBOUT bit
of the VBUS Control Register(VBENCTL) register in the USBPHY Control.
Expose this register as regmap and instantiate the USB VBUS regulator
device, so that consumer can control the vbus using regulator API's
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20240702180032.207275-3-biju.das.jz@bp.renesas.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
