core:
- fix refcounting race on pid handover
fbdev:
- Fix fb_info when vmalloc is used, regression from
CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM.
amdgpu:
- SMU 14.x fix
- vram info parsing fix
- mode1 reset fix
- LTTPR fix
- Virtual display fix
- Avoid spurious error in PSP init
i915:
- Fix potential UAF due to race on fence register revocation
nouveau
- nouveau tv mode fixes.
panel:
- Add KOE TX26D202VM0BWA timings.
-----BEGIN PGP SIGNATURE-----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=0isZ
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2024-06-28' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Regular fixes, mostly amdgpu with some minor fixes in other places,
along with a fix for a very narrow UAF race in the pid handover code.
core:
- fix refcounting race on pid handover
fbdev:
- Fix fb_info when vmalloc is used, regression from
CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM.
amdgpu:
- SMU 14.x fix
- vram info parsing fix
- mode1 reset fix
- LTTPR fix
- Virtual display fix
- Avoid spurious error in PSP init
i915:
- Fix potential UAF due to race on fence register revocation
nouveau
- nouveau tv mode fixes
panel:
- Add KOE TX26D202VM0BWA timings"
* tag 'drm-fixes-2024-06-28' of https://gitlab.freedesktop.org/drm/kernel:
drm/drm_file: Fix pid refcounting race
drm/nouveau/dispnv04: fix null pointer dereference in nv17_tv_get_ld_modes
drm/nouveau/dispnv04: fix null pointer dereference in nv17_tv_get_hd_modes
drm/amdgpu: Don't show false warning for reg list
drm/amdgpu: avoid using null object of framebuffer
drm/amd/display: Send DP_TOTAL_LTTPR_CNT during detection if LTTPR is present
drm/amdgpu: Fix pci state save during mode-1 reset
drm/amdgpu/atomfirmware: fix parsing of vram_info
drm/amd/swsmu: add MALL init support workaround for smu_v14_0_1
drm/i915/gt: Fix potential UAF by revoke of fence registers
drm/panel: simple: Add missing display timing flags for KOE TX26D202VM0BWA
drm/fbdev-dma: Only set smem_start is enable per module option
Embedding net_device into structures prohibits the usage of flexible
arrays in the net_device structure. For more details, see the discussion
at [1].
Un-embed the net_devices from struct lmac by converting them
into pointers, and allocating them dynamically. Use the leverage
alloc_netdev() to allocate the net_device object at
bgx_lmac_enable().
The free of the device occurs at bgx_lmac_disable().
Do not free_netdevice() if bgx_lmac_enable() fails after lmac->netdev
is allocated, since bgx_lmac_disable() is called if bgx_lmac_enable()
fails, and lmac->netdev will be freed there (similarly to lmac->dmacs).
Link: https://lore.kernel.org/all/20240229225910.79e224cf@kernel.org/ [1]
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20240626173503.87636-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This tag contains habanalabs driver changes for v6.11.
The notable changes are:
- uAPI changes:
- Use device-name directory in debugfs-driver-habanalabs.
- Expose server type in debugfs.
- New features and improvements:
- Gradual sleep in polling memory macro.
- Reduce Gaudi2 MSI-X interrupt count to 128.
- Add Gaudi2-D revision support.
- Firmware related changes:
- Add timestamp to CPLD info.
- Gaudi2: Assume hard-reset by firmware upon MC SEI severe error.
- Align Gaudi2 interrupt names.
- Check for errors after preboot is ready.
- Bug fixes and code cleanups:
- Move heartbeat work initialization to early init.
- Fix a race when receiving events during reset.
- Change the heartbeat scheduling point.
- Maintainers:
- Change habanalabs maintainer and git repo path.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Ofir Bitton <obitton@habana.ai>
Link: https://patchwork.freedesktop.org/patch/msgid/ZnfIjTH5AYQvPe7n@obitton-vm-u22.habana-labs.com
Fix copy-paste error in the code comment. The code refers to
LED blinking configuration, not brightness configuration. It
was likely copied from comment above this one which does
refer to brightness configuration.
Fixes: 4e90101843 ("net: phy: phy_device: Call into the PHY driver to set LED blinking")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20240626030638.512069-1-marex@denx.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
<maarten.lankhorst@linux.intel.com>, Maxime Ripard
<mripard@kernel.org>, Thomas Zimmermann <tzimmermann@suse.de>
filp->pid is supposed to be a refcounted pointer; however, before this
patch, drm_file_update_pid() only increments the refcount of a struct
pid after storing a pointer to it in filp->pid and dropping the
dev->filelist_mutex, making the following race possible:
process A process B
========= =========
begin drm_file_update_pid
mutex_lock(&dev->filelist_mutex)
rcu_replace_pointer(filp->pid, <pid B>, 1)
mutex_unlock(&dev->filelist_mutex)
begin drm_file_update_pid
mutex_lock(&dev->filelist_mutex)
rcu_replace_pointer(filp->pid, <pid A>, 1)
mutex_unlock(&dev->filelist_mutex)
get_pid(<pid A>)
synchronize_rcu()
put_pid(<pid B>) *** pid B reaches refcount 0 and is freed here ***
get_pid(<pid B>) *** UAF ***
synchronize_rcu()
put_pid(<pid A>)
As far as I know, this race can only occur with CONFIG_PREEMPT_RCU=y
because it requires RCU to detect a quiescent state in code that is not
explicitly calling into the scheduler.
This race leads to use-after-free of a "struct pid".
It is probably somewhat hard to hit because process A has to pass
through a synchronize_rcu() operation while process B is between
mutex_unlock() and get_pid().
Fix it by ensuring that by the time a pointer to the current task's pid
is stored in the file, an extra reference to the pid has been taken.
This fix also removes the condition for synchronize_rcu(); I think
that optimization is unnecessary complexity, since in that case we
would usually have bailed out on the lockless check above.
Fixes: 1c7a387ffe ("drm: Update file owner during use")
Cc: <stable@vger.kernel.org>
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Aaron Conole says:
====================
selftests: net: Switch pmtu.sh to use the internal ovs script.
Currently, if a user wants to run pmtu.sh and cover all the provided test
cases, they need to install the Open vSwitch userspace utilities. This
dependency is difficult for users as well as CI environments, because the
userspace build and setup may require lots of support and devel packages
to be installed, system setup to be correct, and things like permissions
and selinux policies to be properly configured.
The kernel selftest suite includes an ovs-dpctl.py utility which can
interact with the openvswitch module directly. This lets developers and
CI environments run without needing too many extra dependencies - just
the pyroute2 python package.
This series enhances the ovs-dpctl utility to provide support for set()
and tunnel() flow specifiers, better ipv6 handling support, and the
ability to add tunnel vports, and LWT interfaces. Finally, it modifies
the pmtu.sh script to call the ovs-dpctl.py utility rather than the
typical OVS userspace utilities. The pmtu.sh can still fall back on
the Open vSwitch userspace utilities if the ovs-dpctl.py script can't
be used.
====================
Link: https://patch.msgid.link/20240625172245.233874-1-aconole@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The pmtu testing will require that the OVS module is installed,
so do that.
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org>
Signed-off-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20240625172245.233874-8-aconole@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently there is no entry for
Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml file. The driver
file corresponding to this binding file is drivers/soc/ti/pruss.c which
is maintained in TI KEYSTONE MULTICORE NAVIGATOR DRIVERS. Add the
binding file also to the same section so that this could be maintained.
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Link: https://lore.kernel.org/r/20240625153319.795665-2-danishanwar@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
'struct knav_range_ops' is not modified in these drivers.
Constifying this structure moves some data to a read-only section, so
increase overall security.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
7498 1193 0 8691 21f3 drivers/soc/ti/knav_qmss_acc.o
After:
=====
text data bss dec hex filename
7566 1145 0 8711 2207 drivers/soc/ti/knav_qmss_acc.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/a8b4b428f97fc584f38bf45100aa9da241aeb935.1719159074.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Nishanth Menon <nm@ti.com>
The current pmtu test infrastucture requires an installed copy of the
ovs-vswitchd userspace. This means that any automated or constrained
environments may not have the requisite tools to run the tests. However,
the pmtu tests don't require any special classifier processing. Indeed
they are only using the vswitchd in the most basic mode - as a NORMAL
switch.
However, the ovs-dpctl kernel utility can now program all the needed basic
flows to allow traffic to traverse the tunnels and provide support for at
least testing some basic pmtu scenarios. More complicated flow pipelines
can be added to the internal ovs test infrastructure, but that is work for
the future. For now, enable the most common cases - wide mega flows with
no other prerequisites.
Enhance the pmtu testing to try testing using the internal utility, first.
As a fallback, if the internal utility isn't running, then try with the
ovs-vswitchd userspace tools.
Additionally, make sure that when the pyroute2 package is not available
the ovs-dpctl utility will error out to properly signal an error has
occurred and skip using the internal utility.
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Aaron Conole <aconole@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240625172245.233874-7-aconole@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The current iteration of IPv6 support requires explicit fields to be set
in addition to not properly support the actual IPv6 addresses properly.
With this change, make it so that the ipv6() bare option is usable to
create wildcarded flows to match broad swaths of ipv6 traffic.
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org>
Signed-off-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20240625172245.233874-6-aconole@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This will be used when setting details about the tunnel to use as
transport. There is a difference between the ODP format between tunnel():
the 'key' flag is not actually a flag field, so we don't support it in the
same way that the vswitchd userspace supports displaying it.
Signed-off-by: Aaron Conole <aconole@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240625172245.233874-5-aconole@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
These will be used in upcoming commits to set specific attributes for
interacting with tunnels. Since set() will use the key parsing routine, we
also make sure to prepend it with an open paren, for the action parsing to
properly understand it.
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org>
Signed-off-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20240625172245.233874-4-aconole@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Until recently, the ovs-dpctl utility was used with a limited actions set
and didn't need to have support for multiple similar actions. However,
when adding support for tunnels, it will be important to support multiple
set() actions in a single flow. When printing these actions, the existing
code will be unable to print all of the sets - it will only print the
first.
Refactor this code to be easier to read and support multiple actions of the
same type in an action list.
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org>
Signed-off-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20240625172245.233874-3-aconole@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The OVS module can operate in conjunction with various types of
tunnel ports. These are created as either explicit tunnel vport
types, OR by creating a tunnel interface which acts as an anchor
for the lightweight tunnel support.
This patch adds the ability to add tunnel ports to an OVS
datapath for testing various scenarios with tunnel ports. With
this addition, the vswitch "plumbing" will at least be able to
push packets around using the tunnel vports. Future patches
will add support for setting required tunnel metadata for lwts
in the datapath. The end goal will be to push packets via these
tunnels, and will be used in an upcoming commit for testing the
path MTU.
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org>
Signed-off-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20240625172245.233874-2-aconole@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As per the latest HW manual[1], there is an internal delay(~250 microsec)
from setting ALME = 0 to disabling the alarm function, so the user must
add a short delay of greater than 250µs between setting ALME = 0 and
clearing ALM.
Currently setting of ALME = 0 is done after clearing the ALM, so just
reverse the operation and add a delay of 275 microsec.
[1]https://www.renesas.com/us/en/document/dst/raa215300-datasheet?r=1506351
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20240618152635.48956-3-biju.das.jz@bp.renesas.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
As per the latest HW manual[1], the INT# output is pulled low after the
alarm is triggered. After the INT# output is pulled low, it is low for at
least 250ms, even if the correct action is taken to clear it. It is
impossible to clear ALM if it is still active. The host must wait for the
RTC to progress past the alarm time plus the 250ms delay before clearing
ALM.
[1]https://www.renesas.com/us/en/document/dst/raa215300-datasheet?r=1506351
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20240618152635.48956-2-biju.das.jz@bp.renesas.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Convert dt-binding doc "rtc-fsl-ftm-alarm.txt" to yaml format.
Change example's reg to 32bit address and length.
Remove unrelated rcpm@1e34040 in example.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240528184359.2685109-1-Frank.Li@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
On x86, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/rtc/lib_test.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/rtc/rtc-goldfish.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/rtc/rtc-omap.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/rtc/rtc-rc5t583.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/rtc/rtc-tps65910.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/rtc/rtc-twl.o
Add the missing invocation of the MODULE_DESCRIPTION() macro to all
files which have a MODULE_LICENSE(). This includes rtc-mpc5121.c,
which does not produce a warning with the x86 allmodconfig since it is
not built for x86, but it may cause this warning with Freescale PPC
configurations.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240608-md-drivers-rtc-v1-1-5f44222adfae@quicinc.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Read callbacks registered with nvmem core expect 0 to be returned on
success and a negative value to be returned on failure.
abx80x_nvmem_xfer() on read calls i2c_smbus_read_i2c_block_data() which
returns the number of bytes read on success as per its api description,
this return value is handled as an error and returned to nvmem even on
success.
Fix to handle all possible values that would be returned by
i2c_smbus_read_i2c_block_data().
Fixes: e90ff8ede7 ("rtc: abx80x: Add nvmem support")
Cc: stable@vger.kernel.org
Signed-off-by: Joy Chakraborty <joychakr@google.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Sean Anderson <sean.anderson@seco.com>
Link: https://lore.kernel.org/r/20240613120750.1455209-1-joychakr@google.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Read/write callbacks registered with nvmem core expect 0 to be returned
on success and a negative value to be returned on failure.
cmos_nvram_read()/cmos_nvram_write() currently return the number of
bytes read or written, fix to return 0 on success and -EIO incase number
of bytes requested was not read or written.
Fixes: 8b5b7958fd ("rtc: cmos: use generic nvmem")
Cc: stable@vger.kernel.org
Signed-off-by: Joy Chakraborty <joychakr@google.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20240612083635.1253039-1-joychakr@google.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
UAPI Changes:
Cross-subsystem Changes:
Core Changes:
- panic: Monochrome logo support, Various fixes
- ttm: Improve the number of page faults on some platforms, Fix test
build breakage with PREEMPT_RT, more test coverage and various test
improvements
Driver Changes:
- Add missing MODULE_DESCRIPTION where needed
- ipu-v3: Various fixes
- vc4: Monochrome TV support
- bridge:
- analogix_dp: Various improvements and reworks, handle AUX
transfers timeout
- tc358767: Fix DRM_BRIDGE_ATTACH_NO_CONNECTOR, Fix clock
calculations
- panels:
- More transitions to mipi_dsi wrapped functions
- New panels: Lincoln Technologies LCD197, Ortustech COM35H3P70ULC,
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCZn1DmQAKCRDj7w1vZxhR
xYj3AP9ThM8q3HoCqXKerpEfnb5LYDB4NocLjn/Bamtm134oNQD+M4Gu2zLSVymV
74PwtPYuQGKWrmXdw0tD70/MtTAihQc=
=fSI4
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2024-06-27' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for 6.11:
UAPI Changes:
Cross-subsystem Changes:
Core Changes:
- panic: Monochrome logo support, Various fixes
- ttm: Improve the number of page faults on some platforms, Fix test
build breakage with PREEMPT_RT, more test coverage and various test
improvements
Driver Changes:
- Add missing MODULE_DESCRIPTION where needed
- ipu-v3: Various fixes
- vc4: Monochrome TV support
- bridge:
- analogix_dp: Various improvements and reworks, handle AUX
transfers timeout
- tc358767: Fix DRM_BRIDGE_ATTACH_NO_CONNECTOR, Fix clock
calculations
- panels:
- More transitions to mipi_dsi wrapped functions
- New panels: Lincoln Technologies LCD197, Ortustech COM35H3P70ULC,
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240627-congenial-pistachio-nyala-848cf4@houat
Read/write callbacks registered with nvmem core expect 0 to be returned
on success and a negative value to be returned on failure.
isl1208_nvmem_read()/isl1208_nvmem_write() currently return the number of
bytes read/written on success, fix to return 0 on success and negative on
failure.
Fixes: c3544f6f51 ("rtc: isl1208: Add new style nvmem support to driver")
Cc: stable@vger.kernel.org
Signed-off-by: Joy Chakraborty <joychakr@google.com>
Link: https://lore.kernel.org/r/20240612080831.1227131-1-joychakr@google.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Add power management support to the driver. This allows a SoC to wake
from suspend using the nINT provided by the RTC.
It takes care of the case when the interrupt has not been caught because
the kernel has not yet woke up.
(This is the case when only edges interrupt are caught)
Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
Link: https://lore.kernel.org/r/20240618141851.1810000-4-richard.genoud@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
This patch will prepare for the next one (power management support) by
introducing struct tps6594_rtc.
No functionnal change.
Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
Link: https://lore.kernel.org/r/20240618141851.1810000-3-richard.genoud@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
struct rtc_device is allocated twice in probe(), once with
devm_kzalloc(), and then with devm_rtc_allocate_device().
The allocation with devm_kzalloc() is lost and superfluous.
Fixes: 9f67c1e639 ("rtc: tps6594: Add driver for TPS6594 RTC")
Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
Link: https://lore.kernel.org/r/20240618141851.1810000-2-richard.genoud@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
1. Userspace sends the command "losetup -d" which uses the open() call
to open the device
2. Kernel receives the ioctl command "LOOP_CLR_FD" which calls the
function loop_clr_fd()
3. If LOOP_CLR_FD is the first command received at the time, then the
AUTOCLEAR flag is not set and deletion of the
loop device proceeds ahead and scans the partitions (drop/add
partitions)
if (disk_openers(lo->lo_disk) > 1) {
lo->lo_flags |= LO_FLAGS_AUTOCLEAR;
loop_global_unlock(lo, true);
return 0;
}
4. Before scanning partitions, it will check to see if any partition of
the loop device is currently opened
5. If any partition is opened, then it will return EBUSY:
if (disk->open_partitions)
return -EBUSY;
6. So, after receiving the "LOOP_CLR_FD" command and just before the above
check for open_partitions, if any other command
(like blkid) opens any partition of the loop device, then the partition
scan will not proceed and EBUSY is returned as shown in above code
7. But in "__loop_clr_fd()", this EBUSY error is not propagated
8. We have noticed that this is causing the partitions of the loop to
remain stale even after the loop device is detached resulting in the
IO errors on the partitions
Fix:
Defer the detach of loop device to release function, which is called when
the last close happens, by setting the lo_flags to LO_FLAGS_AUTOCLEAR at
the time of detach i.e in loop_clr_fd() function.
Test case involves the following two scripts:
script1.sh:
while [ 1 ];
do
losetup -P -f /home/opt/looptest/test10.img
blkid /dev/loop0p1
done
script2.sh:
while [ 1 ];
do
losetup -d /dev/loop0
done
Without fix, the following IO errors have been observed:
kernel: __loop_clr_fd: partition scan of loop0 failed (rc=-16)
kernel: I/O error, dev loop0, sector 20971392 op 0x0:(READ) flags 0x80700
phys_seg 1 prio class 0
kernel: I/O error, dev loop0, sector 108868 op 0x0:(READ) flags 0x0
phys_seg 1 prio class 0
kernel: Buffer I/O error on dev loop0p1, logical block 27201, async page
read
Signed-off-by: Gulam Mohamed <gulam.mohamed@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240618164042.343777-1-gulam.mohamed@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
After calling the ext4_da_map_blocks(), a delalloc extent state could
be identified through the EXT4_MAP_DELAYED flag in map. So factor out
buffer_head related handles in ext4_da_map_blocks(), make this function
buffer_head unaware and becomes a common helper, and also update the
stale function commtents, preparing for the iomap da write path in the
future.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240517124005.347221-11-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Rename ext4_insert_delayed_block() to ext4_insert_delayed_blocks(),
pass length parameter to make it insert multiple delalloc blocks at a
time. For non-bigalloc case, just reserve len blocks and insert delalloc
extent. For bigalloc case, we can ensure that the clusters in the middle
of a extent must be unallocated, we only need to check whether the start
and end clusters are delayed/allocated. We should subtract the space for
the start and/or end block(s) if they are allocated.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240517124005.347221-10-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Factor out a common helper ext4_clu_alloc_state(), check whether the
cluster containing a delalloc block to be added has been allocated or
has delalloc reservation, no logic changes.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240517124005.347221-9-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Add 'nr_resv' parameter to ext4_da_reserve_space(), which indicates the
number of clusters wants to reserve, make it reserve multiple clusters
at a time.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240517124005.347221-8-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Rename ext4_es_insert_delayed_block() to ext4_es_insert_delayed_extent()
and pass length parameter to make it insert multiple delalloc blocks at
a time. For the case of bigalloc, split the allocated parameter to
lclu_allocated and end_allocated. lclu_allocated indicates the
allocation state of the cluster which is containing the lblk,
end_allocated indicates the allocation state of the extent end, clusters
in the middle of delay allocated extent must be unallocated.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240517124005.347221-7-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The start block of the delalloc extent to be inserted is equal to
map->m_lblk, just drop the duplicate iblock input parameter.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://patch.msgid.link/20240517124005.347221-6-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In ext4_da_map_blocks(), we could find four kind of extents in the
extent status tree: hole, unwritten, written and delayed extent. Now we
only trim the map len if we found an unwritten extent or a written
extent. This is okay now since map->m_len is always set to one and we
always insert one delayed block at a time. But this will become isn't
okay for other two cases if ext4_insert_delayed_block() and
ext4_da_map_blocks() support inserting multiple map->len blocks later.
1. If we found a hole in the extent status tree which es->es_len is
shorter than the length we want to write, we should trim the
map->m_len to prevent adding extra delay more blocks than we
expected. For example, assume we write data [A, C) to a file that
contains a hole extent [A, B) and a written extent [B, D) in the
cache.
A B C D
before da write: ...hhhhhh|wwwwww....
Then we will get extent [A, B), we should trim map->m_len to B-A
before inserting new delalloc blocks, if not, the range [B, C) will
be duplicated.
2. If we found a delayed extent in the extent status tree which
es->es_len is shorter than the length we want to write, we should
trim the map->m_len to es->es_len and return directly since the front
part of this map has been delayed, we can't insert the delalloc
extent that contains the latter part in this round, we should return
the delayed length and the caller should increase the position and
call ext4_da_map_blocks() again. For example, assume we write data
[A, C) to a file that contains a delayed extent [A, B) in the cache.
A B C
before da write: ...dddddd|hhh....
Then we will get delayed extent [A, B), we should also trim map->m_len
to B-A and return, if not, we will incorrectly assume that the write
is complete and won't insert [B, C).
So we need to always trim the map->m_len if the found es->es_len in the
extent status tree is shorter than the map->m_len, prearing for
inserting a extent with multiple delalloc blocks. This patch only does a
pre-fix, the handle is crude and ext4_da_map_blocks() deserve a cleanup,
we will do that later.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240517124005.347221-5-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The per-inode i_reserved_data_blocks count the reserved delalloc blocks
in a regular file, it should be zero when destroying the file. The
per-fs s_dirtyclusters_counter count all reserved delalloc blocks in a
filesystem, it also should be zero when umounting the filesystem. Now we
have only an error message if the i_reserved_data_blocks is not zero,
which is unable to be simply captured, so add WARN_ON_ONCE to make it
more visable.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240517124005.347221-4-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4_da_map_blocks looks up for any extent entry in the extent status
tree (w/o i_data_sem) and then the looks up for any ondisk extent
mapping (with i_data_sem in read mode).
If it finds a hole in the extent status tree or if it couldn't find any
entry at all, it then takes the i_data_sem in write mode to add a da
entry into the extent status tree. This can actually race with page
mkwrite & fallocate path.
Note that this is ok between
1. ext4 buffered-write path v/s ext4_page_mkwrite(), because of the
folio lock
2. ext4 buffered write path v/s ext4 fallocate because of the inode
lock.
But this can race between ext4_page_mkwrite() & ext4 fallocate path
ext4_page_mkwrite() ext4_fallocate()
block_page_mkwrite()
ext4_da_map_blocks()
//find hole in extent status tree
ext4_alloc_file_blocks()
ext4_map_blocks()
//allocate block and unwritten extent
ext4_insert_delayed_block()
ext4_da_reserve_space()
//reserve one more block
ext4_es_insert_delayed_block()
//drop unwritten extent and add delayed extent by mistake
Then, the delalloc extent is wrong until writeback and the extra
reserved block can't be released any more and it triggers below warning:
EXT4-fs (pmem2): Inode 13 (00000000bbbd4d23): i_reserved_data_blocks(1) not cleared!
Fix the problem by looking up extent status tree again while the
i_data_sem is held in write mode. If it still can't find any entry, then
we insert a new da entry into the extent status tree.
Cc: stable@vger.kernel.org
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240517124005.347221-3-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Factor out a new common helper ext4_map_query_blocks() from the
ext4_da_map_blocks(), it query and return the extent map status on the
inode's extent path, no logic changes.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://patch.msgid.link/20240517124005.347221-2-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
With ARCH=s390, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/s390/net/lcs.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Acked-by: Alexandra Winter <wintera@linux.ibm.com>
Link: https://patch.msgid.link/20240625-md-s390-drivers-s390-net-v2-1-5a8a2b2f2ae3@quicinc.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Although designs may contain an ISP IP block, the camera might be a USB
camera. Because of this the ISP firmware is considered optional from
amdgpu. However if the firmware doesn't get loaded the hardware should
not be initialized.
Adjust the return code for early init to ensure the IP block doesn't go
through the other init and fini sequences. Also decrease the message
about firmware load failure to debug so it's not as alarming to users.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Pratap Nirujogi <pratap.nirujogi@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
refine isp firmware loading
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove temporary WA to disable ISP prefetch as MMHUB SAW is initialized
to support ISP HW access GART memory using the TLSi path with prefetch
enabled.
Signed-off-by: Pratap Nirujogi <pratap.nirujogi@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
snprintf can truncate the output fw filename if the isp ucode_prefix
exceeds 29 characters. Knowing ISP ucode_prefix is in the format
isp_x_x_x, limiting the size of ucode_prefix[] to 10 characters
to fix the warning.
Fixes the below warning:
drivers/gpu/drm/amd/amdgpu/amdgpu_isp.c: In function 'isp_early_init':
drivers/gpu/drm/amd/amdgpu/amdgpu_isp.c:192:58: warning: 'snprintf'
output may be truncated before the last format character
[-Wformat-truncation=]
192 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s.bin", ucode_prefix);
| ^
In function 'isp_load_fw_by_psp',
inlined from 'isp_early_init' at drivers/gpu/drm/amd/amdgpu/amdgpu_isp.c:218:8:
drivers/gpu/drm/amd/amdgpu/amdgpu_isp.c:192:9: note: 'snprintf' output between 12 and 41 bytes into a destination of size 40
192 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s.bin", ucode_prefix);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Pratap Nirujogi <pratap.nirujogi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Disable MMHUB prefetch for ISP v4.1.1 as a temporary WA until
the GART supports MMHUB TLSi and SAW for ISP HW to access
GART memory using the TLSi path.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Pratap Nirujogi <pratap.nirujogi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
