The KVM RISC-V does not delegate AMO load/store access fault traps to
VS-mode (hedeleg) so typically M-mode takes these traps and redirects
them back to HS-mode. However, upon returning from M-mode, the KVM
RISC-V running in HS-mode terminates VS-mode software.
The KVM RISC-V should redirect AMO load/store access fault traps back
to VS-mode and let the VS-mode trap handler determine the next steps.
Signed-off-by: Yu-Wei Hsu <betterman5240@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20240429092113.70695-1-betterman5240@gmail.com
Signed-off-by: Anup Patel <anup@brainfault.org>
'perf kvm stat report/record' generates a statistical analysis of KVM
events and can be used to analyze guest exit reasons.
"report" reports statistical analysis of guest exit events.
To record kvm events on the host:
# perf kvm stat record -a
To report kvm VM EXIT events:
# perf kvm stat report --event=vmexit
Signed-off-by: Shenlin Liang <liangshenlin@eswincomputing.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240422080833.8745-3-liangshenlin@eswincomputing.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Like other architectures, RISCV KVM also needs to add these event
tracepoints to count the number of times kvm guest entry/exit.
Signed-off-by: Shenlin Liang <liangshenlin@eswincomputing.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Tested-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240422080833.8745-2-liangshenlin@eswincomputing.com
Signed-off-by: Anup Patel <anup@brainfault.org>
We have common APLIC and IMSIC headers available under
include/linux/irqchip/ directory which are used by APLIC
and IMSIC irqchip drivers. Let us replace the use of
kvm_aia_*.h headers with include/linux/irqchip/riscv-*.h
headers.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Link: https://lore.kernel.org/r/20240411090639.237119-2-apatel@ventanamicro.com
Signed-off-by: Anup Patel <anup@brainfault.org>
There is an useless extra comma at the end of some error messages, remove
them.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/e7ac0fa83c6100cbe4e0efa90cf99291c2423b10.1719037737.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Instead of rescaling current or voltage channels after the fact, use the
dedicated scaling API. This should reduce any inaccuracies resulting from
the scaling.
This is also slightly more efficient as it saves a function call and a
multiplication.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/5668d73b92eb6318c7f094a9a8fa914c909485ca.1719037737.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The ab8500_charger_get_[ac|vbus]_[current|voltage]() functions should
return an error code on error.
Up to now, an un-initialized value is returned.
This makes the error handling of the callers un-reliable.
Return the error code instead, to fix the issue.
Fixes: 97ab78bac5 ("power: supply: ab8500_charger: Convert to IIO ADC")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/f9f65642331c9e40aaebb888589db043db80b7eb.1719037737.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
- Cleanups and fixes for the Renesas R-Car VSP and VIN drivers
- Miscellaneous cleanups to V4L2 core
-----BEGIN PGP SIGNATURE-----
iJgEABYKAEAWIQTAnvhxs4J7QT+XHKnMPy2AAyfeZAUCZnNeLCIcbGF1cmVudC5w
aW5jaGFydEBpZGVhc29uYm9hcmQuY29tAAoJEMw/LYADJ95kxyUBAKdQ86lXbVd1
97wtbRDP3H3MTtEowjskDGqhfH0QA9kXAP9eTf7rJixORvXFg/DaLcjdWIyfIsjY
4gz7aHO8MsXGBg==
=BgVa
-----END PGP SIGNATURE-----
Merge tag 'tags/next-media-renesas-20240619' of git://git.kernel.org/pub/scm/linux/kernel/git/pinchartl/linux.git
- Conversion of max9286 and adv748x to V4L2 subdev active state
- Cleanups and fixes for the Renesas R-Car VSP and VIN drivers
- Miscellaneous cleanups to V4L2 core
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Refine the value and mask define of bit depth for mtk_ovl_set bit_depth().
Use cmdq_pkt_write_mask() instead of cmdq_pkt_write() to avoid bit depth
settings being overwritten.
Fixes: fb36c5020c ("drm/mediatek: Add support for AR30 and BA30 overlays")
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20240624095726.18818-1-jason-jh.lin@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Fields flags and res[3] replaced with one 4 byte flags.
Fixes: 4534a70b70 ("fs/ntfs3: Add headers and misc files")
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
This involves converting all users of offs_page to offs_folio, but
it's worth it because we get rid of a lot of hidden calls to
compound_head(). We continue to use order-0 folios here, and convert
back to a struct page to call ntfs_bio_pages().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
We still use an array of pages for the decompression, but this removes
a few calls to compound_head().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
The function still takes an array of pages, but use a folio internally.
This function would deadlock against itself if used with large folios
(as it locks each page), so we can be a little sloppy with the conversion
back from folio to page for now.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Nobody checks the error flag on ntfs3 folios, so stop setting and
clearing it.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Fetch a folio from the page cache instead of a page and operate on it.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
[almaz.alexandrovich@paragon-software.com: skip using folio_end_read]
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Now that both callers of attr_data_write_resident() have a folio, pass
it in and use memcpy_from_folio() to handle all the gnarly highmem
multi-page problems.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Convert the passed page back into a folio and use the folio APIs, saving
a few hidden calls to compound_head().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Now that all three callers have a folio, pass it in and use
folio_fill_tail() to do the hard work of filling the folio.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Retrieve a folio from the page cache instead of a precise page.
This function is now large folio safe, but its called function is not.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Remove the struct page conversion, and use a folio throughout. We still
convert back to a struct page for calling some internal functions,
but those will change soon.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
CHECK /home/andy/prj/linux-topic-uart/fs/ntfs3/super.c
fs/ntfs3/super.c:471:23: warning: unknown escape sequence: '\%'
Drop stray '\' (backslash) in formatting string.
Fixes: d27e202b9a ("fs/ntfs3: Add more info into /proc/fs/ntfs3/<dev>/volinfo")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Added out-of-bound checking for *ane (ATTR_NAME_ENTRY).
Reported-by: lei lu <llfamsec@gmail.com>
Fixes: 865e7a7700 ("fs/ntfs3: Reduce stack usage")
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
This adds sanity checks for ff offset. There is a check
on rt->first_free at first, but walking through by ff
without any check. If the second ff is a large offset.
We may encounter an out-of-bound read.
Signed-off-by: lei lu <llfamsec@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Clusters allocated for Extended Attributes, must be freed
when rolling back inode creation.
Fixes: 82cae269cf ("fs/ntfs3: Add initialization of super block")
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
The issue was detected due to xfstest 465 failing.
Fixes: 4342306f0f ("fs/ntfs3: Add file operations and implementation")
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
If the offset is equal to or greater than the end of
file, an error is returned. For such operations (i.e., inserting
a hole at the end of file), ftruncate(2) should be used.
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Fix netfs_page_mkwrite() to check that folio->mapping is valid once it has
taken the folio lock (as filemap_page_mkwrite() does). Without this,
generic/247 occasionally oopses with something like the following:
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
RIP: 0010:trace_event_raw_event_netfs_folio+0x61/0xc0
...
Call Trace:
<TASK>
? __die_body+0x1a/0x60
? page_fault_oops+0x6e/0xa0
? exc_page_fault+0xc2/0xe0
? asm_exc_page_fault+0x22/0x30
? trace_event_raw_event_netfs_folio+0x61/0xc0
trace_netfs_folio+0x39/0x40
netfs_page_mkwrite+0x14c/0x1d0
do_page_mkwrite+0x50/0x90
do_pte_missing+0x184/0x200
__handle_mm_fault+0x42d/0x500
handle_mm_fault+0x121/0x1f0
do_user_addr_fault+0x23e/0x3c0
exc_page_fault+0xc2/0xe0
asm_exc_page_fault+0x22/0x30
This is due to the invalidate_inode_pages2_range() issued at the end of the
DIO write interfering with the mmap'd writes.
Fixes: 102a7e2c59 ("netfs: Allow buffered shared-writeable mmap through netfs_page_mkwrite()")
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/780211.1719318546@warthog.procyon.org.uk
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: Matthew Wilcox <willy@infradead.org>
cc: Jeff Layton <jlayton@kernel.org>
cc: netfs@lists.linux.dev
cc: v9fs@lists.linux.dev
cc: linux-afs@lists.infradead.org
cc: linux-cifs@vger.kernel.org
cc: linux-mm@kvack.org
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Delete some xarray-based buffer wangling functions that are intended for
use with bounce buffering, but aren't used because bounce-buffering got
deferred to a later patch series. Now, however, the intention is to use
something other than an xarray to do this.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20240620173137.610345-9-dhowells@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
During the writeback procedure, at the end of netfs_write_folio(), pending
write operations are flushed if the amount of write-streaming data stored
in a page is less than the size of the folio because if we haven't modified
a folio to the end, it cannot be contiguous with the following folio...
except if the dirty region of the folio is right at the end of the folio
space.
Fix the test to take the offset into the folio into account as well, such
that if the dirty region runs right up to the end of the folio, we leave
the flushing for later.
Fixes: 288ace2f57 ("netfs: New writeback implementation")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: Eric Van Hensbergen <ericvh@kernel.org>
cc: Latchesar Ionkov <lucho@ionkov.net>
cc: Dominique Martinet <asmadeus@codewreck.org>
cc: Christian Schoenebeck <linux_oss@crudebyte.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Steve French <sfrench@samba.org>
cc: Paulo Alcantara <pc@manguebit.com> (DFS, global name space)
cc: v9fs@lists.linux.dev
cc: linux-afs@lists.infradead.org
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20240620173137.610345-4-dhowells@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
st,stih407-core-syscfg syscon block comes with a child - the audio
codec, whose binding is still in TXT format. Document the child to fix
dtbs_check validation errors, while allowing later the binding to be
converted to DT schema:
stih410-b2260.dtb: core-syscfg@92b0000: 'sti-sasg-codec' does not match any of the regexes: 'pinctrl-[0-9]+'
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240517142245.178556-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
DT schema expects panel timings node to follow certain pattern,
dtbs_check warnings:
am335x-pdu001.dtb: display-timings: '240x320p16' does not match any of the regexes: '^timing', 'pinctrl-[0-9]+'
Linux drivers do not care about node name, so this should not have
effect on Linux.
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> # For DaVinci
Link: https://lore.kernel.org/r/20240509104813.216655-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Add the ability to send out RFC-3948 NAT keepalives from the xfrm stack.
To use, Userspace sets an XFRM_NAT_KEEPALIVE_INTERVAL integer property when
creating XFRM outbound states which denotes the number of seconds between
keepalive messages.
Keepalive messages are sent from a per net delayed work which iterates over
the xfrm states. The logic is guarded by the xfrm state spinlock due to the
xfrm state walk iterator.
Possible future enhancements:
- Adding counters to keep track of sent keepalives.
- deduplicate NAT keepalives between states sharing the same nat keepalive
parameters.
- provisioning hardware offloads for devices capable of implementing this.
- revise xfrm state list to use an rcu list in order to avoid running this
under spinlock.
Suggested-by: Paul Wouters <paul.wouters@aiven.io>
Tested-by: Paul Wouters <paul.wouters@aiven.io>
Tested-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Starting with v2.5 of Qualcomm LPASS Codec, few registers in the WSA
macro block change. Bring proper support for this v2.5 and newer
versions, to fix second speaker playback (speaker was silent).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patch.msgid.link/20240625-qcom-audio-wsa-second-speaker-v1-3-f65ffdfc368c@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver for Qualcomm LPASS WSA macro codec was developed and tested
on codec v2.1, however v2.5 has significant changes in the registers.
The driver correctly works for v2.1 codec, but has issues when running
on SoC with v2.5 codec (so starting with SM8450, even though playback
works properly on that SoC).
Prepare the driver for handling differences in register layouts of newer
version. This does not have functional impact on older codec versions,
but just:
1. Renames few soc_enums and widgets as v2.1,
2. For registers being different in v2.5, moves the defaults and regmap
configuration to new structures,
3. Adds new 'struct wsa_reg_layout' with offsets and masks for few
registers, so most of the code can stay unchaged on v2.5,
4. Chooses proper widgets, regmap config and register layout based on
version of the codec.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patch.msgid.link/20240625-qcom-audio-wsa-second-speaker-v1-2-f65ffdfc368c@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The Vivobook S 16X IPS needs a quirks-table entry for the internal microphone to function properly.
Signed-off-by: Vyacheslav Frantsishko <itmymaill@gmail.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20240626070334.45633-1-itmymaill@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Verify bitmap block numbers and inode table blocks are sane before using
them for checking bits in the block bitmap.
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
An overflow may occur if the function is called with the last
block and an offset greater than zero. It is necessary to add
a check to avoid this.
Found by Linux Verification Center (linuxtesting.org) with Svace.
[JK: Make test cover also unalloc table freeing]
Link: https://patch.msgid.link/20240620072413.7448-1-r.smirnov@omp.ru
Suggested-by: Jan Kara <jack@suse.com>
Signed-off-by: Roman Smirnov <r.smirnov@omp.ru>
Signed-off-by: Jan Kara <jack@suse.cz>
Avoid mounting filesystems where the partition would overflow the
32-bits used for block number. Also refuse to mount filesystems where
the partition length is so large we cannot safely index bits in a
block bitmap.
Link: https://patch.msgid.link/20240620130403.14731-1-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
The wrapper is completely pointless as all the checks are already done
in __load_block_bitmap(). Just drop it and rename __load_block_bitmap().
Link: https://patch.msgid.link/20240617154201.29512-3-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
When the filesystem block bitmap is corrupted, we detect the corruption
while loading the bitmap and fail the allocation with error. However the
next allocation from the same bitmap will notice the bitmap buffer is
already loaded and tries to allocate from the bitmap with mixed results
(depending on the exact nature of the bitmap corruption). Fix the
problem by using BH_verified bit to indicate whether the bitmap is valid
or not.
Reported-by: syzbot+5f682cd029581f9edfd1@syzkaller.appspotmail.com
CC: stable@vger.kernel.org
Link: https://patch.msgid.link/20240617154201.29512-2-jack@suse.cz
Fixes: 1e0d4adf17 ("udf: Check consistency of Space Bitmap Descriptor")
Signed-off-by: Jan Kara <jack@suse.cz>
It is good practice to check that the underlying adapter supports
I2C transfers before attempting them. The i2c core would eventually
return an error, but it's more efficient to fail early.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
These drivers don't use the driver_data member of struct i2c_device_id,
so don't explicitly initialize this member.
This prepares putting driver_data in an anonymous union which requires
either no initialization or named designators. But it's also a nice
cleanup on its own.
While add it, also remove a comma after the sentinel entry.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
